5327 Calibration Jobs - Page 24

Job Description: Role: Instrument Technician Experience: 2–5 years of experience in power plants, preferably in biomass, thermal, or renewable energy facilities. Salary: 2.4 to 3 LPA Location: Phalodi, Rajasthan Notice Period: 15 days or less Job Summary: We are seeking an experienced and proactive Instrument Technician to support the maintenance and operation of instrumentation and control systems in our 8 MW biomass power plant in Phalodi. The ideal candidate will be responsible for ensuring the accurate functioning, calibration and troubleshooting of all plant instruments critical to safety, efficiency, and compliance with regulatory standards. Key Responsibilities: ∙ Install, calibrate, and maintain field instrumentation such as temperature, pressure, flow, and level sensors used in biomass combustion and steam generation processes. ∙ Monitor, troubleshoot, and repair control systems (PLC/DCS), analyzers, control valves, transmitters, and signal converters. ∙ Conduct preventive and corrective maintenance of all instrumentation and control equipment. ∙ Support the operation of biomass fuel handling systems, boilers, turbines, and ash handling through instrumentation maintenance. ∙ Work closely with operations and electrical teams during plant start-up, shutdown, and emergencies. ∙ Ensure instrumentation systems are operating within defined parameters and comply with HSE guidelines. ∙ Maintain documentation, including instrument loop diagrams, calibration reports, and maintenance records. ∙ Assist in the testing and commissioning of new instrumentation systems and equipment modifications. ∙ Use test and calibration tools like HART communicators, loop calibrators, multimeters, and IR thermometers. ∙ Participate in the development and improvement of maintenance practices and spare parts planning. Qualifications & Experience: ∙ ITI/Diploma in Instrumentation, Electronics, or related field. ∙ Minimum of 3–5 years of experience in power plants, preferably in biomass, thermal, or renewable energy facilities. ∙ Familiarity with biomass plant systems such as combustion controls, flue gas analysers, and steam pressure control loops. ∙ Hands-on experience with PLC/DCS systems (Siemens, Allen Bradley, or equivalent). ∙ Knowledge of safety standards and environmental compliance relevant to biomass power generation. Preferred Skills: ∙ Experience working in small- to mid-sized biomass or thermal power plants. ∙ Ability to read and interpret P&IDs, loop drawings, and electrical schematics. ∙ Strong troubleshooting and problem-solving skills. ∙ Good team coordination and communication abilities. ∙ Knowledge of CMMS software is a plus. Physical Requirements: ∙ Must be able to work in high-temperature industrial environments. ∙ Physically fit to climb ladders, access equipment platforms, and lift equipment/tools. ∙ Willingness to work in shifts and be available for emergency maintenance calls.

Job Description Responsible for performing the chemical and instrumentation analysis for In-process, raw materials, packing materials, intermediates and finished products to meet the dispatch timeline as per the monthly schedule received from PPL. Responsible for performing the instrumentation like ICP-MS and LC-MS analysis for In-process, raw materials, intermediates and finished products to meet the dispatch timeline as per the monthly schedule. Responsible for performing the analytical method developments, analytical method validations, analytical method transfers and analytical method verifications by ICP-MS and LC-MS/MS. Responsible to prepare and review the protocols, work sheets and reports for method developments, method validations verifications and transfers Responsible for allotting the work to the chemist within the section. Responsible for performing the calibrations of all instruments in section as per the schedule. Responsible for maintaining all the documentation online. Responsible for maintaining the minimum stock for working standards, reference standards and impurity standards and ordering as and when required. Responsible for maintaining the minimum stocks for chemicals, reagents, glass wares and solvents required for analysis. Responsible for keeping instruments neat and clean and overall housekeeping in the section. Responsible for review of analytical data, calibration data, qualification data Responsible for keeping all instruments within the calibrated status. Responsible to do the analysis, review and release on time to support the production Responsible for reducing the lab incidences, repeat analysis and no Data Integrity issues. Responsible for real time data monitoring. Responsible for reviewing the analytical data received from external laboratory. Responsible for maintaining all the calibration certificates, qualification certificates, standard weight certificates and working/reference standard certificates. Responsible for maintaining the consumption records and traceability of working/reference standards. Responsible for OOS investigations, OOT, OOC and deviations investigations and CAPA implementations Responsible for review of SOP’s , test procedures and specifications Responsible for providing the training on GLP/GMP to the employees working the section. Responsible for releasing the batches timely manner to achieve the site requirement. Responsible for preparing the COA’s as per the customer requirement Responsible for approving/rejecting the batches in SAP Responsible for Controlling the cost and operate within the approved budget. Responsible for maintaining the instruments in working condition and reduce the breakdown time of instruments. Responsible for carrying out the analytical method transfers. Responsible for keeping the critical spare parts of the instruments. Responsible for Safe working conditions and clean environmental practices. Responsible for usages of required safety appliances in the section. Responsible for SFTI. Responsible for coordination with QA/Production/PPIC/Warehouse/TSD for smooth dispatches Responsible for training the contract persons and helpers on glassware cleaning. Qualifications Bachelor's degree About Us In the three decades of its existence, Piramal Group has pursued a twin strategy of both organic and inorganic growth. Driven by its core values, Piramal Group steadfastly pursues inclusive growth, while adhering to ethical and values-driven practices. Equal employment opportunity Piramal Group is proud to be an Equal Employment Opportunity and Affirmative Action employer. We do not discriminate based upon race, ethnicity, religion, color, national origin, gender (including pregnancy, childbirth, or related medical conditions), sexual orientation, gender identity, gender expression, age, status as a protected veteran, status as an individual with a disability, genetics, or other applicable legally protected characteristics. We base our employment decisions on merit considering qualifications, skills, performance, and achievements. We endeavor to ensure that all applicants and employees receive equal opportunity in personnel matters, including recruitment, selection, training, placement, promotion, demotion, compensation and benefits, transfers, terminations, and working conditions, including reasonable accommodation for qualified individuals with disabilities as well as individuals with needs related to their religious observance or practice. About The Team Piramal Pharma Solutions (PPS) is a Contract Development and Manufacturing Organization (CDMO) offering end-to-end development and manufacturing solutions across the drug life cycle. We serve our customers through a globally integrated network of facilities in North America, Europe, and Asia. This enables us to offer a comprehensive range of services including drug discovery solutions, process & pharmaceutical development services, clinical trial supplies, commercial supply of APIs, and finished dosage forms. We also offer specialized services such as the development and manufacture of highly potent APIs, antibody-drug conjugations, sterile fill/finish, peptide products & services, and potent solid oral drug products. PPS also offers development and manufacturing services for biologics including vaccines, gene therapies, and monoclonal antibodies, made possible through Piramal Pharma Limited’s investment in Yapan Bio Private Limited. Our track record as a trusted service provider with experience across varied technologies makes us a partner of choice for innovators and generic companies worldwide.

Position Title: Service Coordinator (CD) Base Location: Delhi Primary Role: We are looking for a diligent and organized Service Coordinator to support our service and application teams in managing logistics, documentation, and customer communication. This role involves coordinating shipments, tracking service-related inventory, maintaining records for audits, and ensuring smooth workflow between vendors, engineers, and internal departments. Key Responsibilities: Coordinate with vendors, principals, and logistics service providers for incoming and outgoing shipments. Ensure proper dispatch of spare parts and service tools to customer sites in collaboration with engineers and application specialists. Coordinate with Service Lead for all dispatches related to sites. Prepare accurate shipping and return documentation and ensure record maintenance for legal and audit compliance (including AWB, invoices, POs, PODs). Liaise with the accounts department regarding payments to vendors/principals and customs duty clearance. Manage inventory records, including processing unused spare parts returns and raising credit notes. Maintain AMC/CMC status and raise invoices accordingly; follow up on overdue payments and inform service engineers. Generate and compile reports such as service reports, spare parts consumption, and stock updates for internal and principal use. Track billing status and coordinate with accounts for advance or pending payments. Manage service and application team expense documentation and ensure timely submission. Coordinate calibration of service tools and the export or disposal of faulty or defective instruments. Provide support during internal or statutory audits by coordinating with stores and accounts teams. Skills & Competencies: Strong coordination and communication skills Excellent documentation and organizational abilities Proficient in MS Office and service documentation tools Familiarity with logistics/shipping processes Knowledge of AMC/CMC billing and service operations is preferred. Qualification: Graduate in any discipline (preferred: Logistics, Business Administration, or related field) Experience: 3–6 years of relevant experience in service coordination or logistics handling

About Medhavi Skills University Medhavi Skills University (MSU) is a government-notified private skills university established under a State Act in Sikkim, dedicated to promoting quality skill education and entrepreneurship integrated with higher education. As a pioneering institution in the convergence of the skilling ecosystem with higher education, MSU aligns with the National Education Policy, 2020 (NEP 2020). Recognized by the UGC and established in 2021, MSU collaborates with industries and Skill Development Institutes to offer work-integrated courses, embedding on-the-job internships and training within the curriculum.MSU is a recognized Awarding Body under the National Council for Vocational Education &Training (NCVET) and is empanelled with the Directorate General of Training (DGT). As an anchor university partner with the National Skill Development Corporation (NSDC) and the Project Management Unit (PMU) of NSDC International, MSU is committed to preparing youth for the future workspace by co- working with industry partners to design and implement demand-driven programs. For more information, visit https://www.msu.edu.in Role Overview: The Laboratory Assistant supports laboratory operations by preparing and maintaining equipment,conducting tests, and ensuring a clean and organized workspace. This role is crucial for maintaining the efficiency and accuracy of laboratory work and supporting the research and analysis conducted by scientists and researchers. Key Responsibilities: Preparation and Maintenance: Prepare laboratory equipment for experiments and tests. Maintain and clean laboratory equipment and ensure proper storage. Monitor and order supplies to ensure availability of necessary materials. Conducting Tests and Experiments: Assist with the setup and execution of laboratory experiments and procedures. Record and document experimental results, observations, and data accurately. Assist in the calibration and maintenance of laboratory instruments Data Management: Compile and organize data from experiments and tests. Assist in data analysis and interpretation as needed. Ensure all laboratory records are maintained and updated according to protocols. Safety and Compliance: Adhere to safety protocols and procedures to ensure a safe working environment. Properly handle and dispose of hazardous materials according to safety guidelines. Ensure compliance with laboratory regulations and quality standards 5. Administrative Support: Assist in preparing reports, presentations, and documentation for research and projects. Coordinate with other laboratory staff and researchers to support ongoing projects. Provide general administrative support as required Qualifications & Skills Required: Bachelor in Physiotherapy (BPT) with 4 – 5 years of experience Previous laboratory experience or coursework in a scientific discipline is preferred. Basic knowledge of laboratory techniques and equipment. Proficiency in using laboratory instruments and software. Strong organizational and multitasking abilities. Attention to detail and accuracy in data recording. Good communication and interpersonal skills. Certification in Physiotherapy Physical Requirements: Ability to lift and carry laboratory supplies and equipment.• Capability to stand for extended periods and perform repetitive tasks. What We Offer Being a key player in something potentially massive and world-changing Competitive salary and incentive structure, best in the industry. Opportunities for professional development and growth. A supportive and collaborative work environment. The chance to make a meaningful impact on the careers and lives of working professionals How to Apply Interested candidates should submit a resume and cover letter detailing their qualifications and experience at careers@msu.edu.in at earliest possible. Medhavi Skills University is an equal opportunity employer. We celebrate diversity and are committed to creating an inclusive environment for all employees. Job Type: Full-time Pay: ₹20,000.00 - ₹25,000.00 per month Benefits: Cell phone reimbursement Health insurance Leave encashment Provident Fund Work Location: In person

Summary Position Summary Product/Place Data Science Lead-Manager ConvergeCONSUMER ™ is a product-driven business that combines differentiated consumer insights with next-generation decision and experience platforms to help consumer-focused businesses optimize decision making and deliver personalized experiences to drive growth, consumer loyalty and profitability. We operate with the speed and agility of a startup, inside the world’s largest professional services firm. Work you’ll do Work with Product Managers/Owners to understand how products can be used and should be implemented to solve client problems. Work with Project Managers to understand client requirements and brainstorm on solutioning it, implement the assets/products as applicable. Perform exploratory data analysis to understand the data and work with client team to solve the data issues. Apply data science/ML techniques to solve complex optimization problems Experience working with deep learning algorithm (good to have) Explain analytics model behavior / results in the vernacular of the market need Implement, test, validate and demonstrate analytical models through various relevant error metrics and calibration techniques. Present the optimization accuracy results to the client team. Deploy models into production Provide feedback to product team to improvise the products. Consistently strive to acquire new skills on AI / ML, Cloud, Big Data technologies Support and coach your team on best coding practices, development tools, and pathfinding and surveys for technologies Ensure SDLC best practices and standards are followed Qualifications And Experience Required: Bachelor’s/Master’s degree in a relevant field from a top-tier university 9+ years’ experience leading / implementing data science solutions Familiarity with consumer related data and a general interest in the retail, consumer products manufacturing, automotive, transportation, or hospitality sectors Deep understanding of data science principles, including machine learning, deep learning and assortment and other optimization techniques/concepts. Analytical mind with proven ability to dissect problems, implement data science solutions, and drive business outcomes Knowledge of and experience working with data architectures and data models. Experience developing, implementing and maintaining machine learning and advanced statistical algorithms Experience working with large quantitative and qualitative datasets both hands on and managing teams doing the work Proven skills in Python, PySpark, SQL is must have Experience with BI/analytics tools, such as Tableau or similar tools is good to have Experience using statistical computer languages to prepare data for analysis, visualize data as part of exploratory analysis, generate features, and other similar data science driven data handling. Experience working with data science tools/models i.e., Sklearn , Regression, classification and clustering models Experience in cloud-based eco-systems such GCP, AWS, or Azure for development and deployment of models Strong storytelling skills with experience presenting to large technical and non-technical audiences A desire to take initiative and continuously work on improving the products you are responsible for How You’ll Grow At Deloitte, we’ve invested a great deal to create a rich environment in which our professionals can grow. We provide our professionals with a variety of learning and networking opportunities, some of which are: Intensive trainings on latest technologies from eminent external trainers. Internal trainings and workshops. Subscriptions to prominent online training platforms, such as Lynda. Hackathons and tech challenges to exercise your front-end skills. Freedom to adopt and use the latest technologies in your live projects. Travel opportunity (wherever possible) to work at the client’s location or at our global offices. Apart from the above, you will have access to DU: The Leadership Center in India, our state-of-the-art, world-class learning Center in the Hyderabad offices is an extension of the DU in Westlake, Texas, and represents a tangible symbol of our commitment to our people’s growth and development. Explore DU: The Leadership Center in India Benefits At Deloitte, we know that great people make a great organization. We value our people and offer employees a broad range of benefits. Learn more about what working at Deloitte can mean for you. Deloitte’s culture Our positive and supportive culture encourages our people to do their best every day. We celebrate individuals by recognizing their uniqueness and offering them the flexibility to make daily choices that can help them to be healthy, centered, confident, and aware. We offer comprehensive well-being programs and are continuously looking for new ways to maintain a culture that is inclusive, invites authenticity, leverages our diversity, and where our people excel and lead happy lives. Learn more about Life at Deloitte. Corporate citizenship Deloitte is led by a purpose: to make an impact that matters. This purpose defines who we are and extends to relationships that we have with our clients, our people and our communities.We believe that business has the power to inspire and transform. We focus on education, giving, skill-based volunteerism, and leadership to help drive positive social impact in our communities. Learn more about Deloitte’s impact on the world. #I&T Our purpose Deloitte’s purpose is to make an impact that matters for our people, clients, and communities. At Deloitte, purpose is synonymous with how we work every day. It defines who we are. Our purpose comes through in our work with clients that enables impact and value in their organizations, as well as through our own investments, commitments, and actions across areas that help drive positive outcomes for our communities. Our people and culture Our inclusive culture empowers our people to be who they are, contribute their unique perspectives, and make a difference individually and collectively. It enables us to leverage different ideas and perspectives, and bring more creativity and innovation to help solve our clients' most complex challenges. This makes Deloitte one of the most rewarding places to work. Professional development At Deloitte, professionals have the opportunity to work with some of the best and discover what works best for them. Here, we prioritize professional growth, offering diverse learning and networking opportunities to help accelerate careers and enhance leadership skills. Our state-of-the-art DU: The Leadership Center in India, located in Hyderabad, represents a tangible symbol of our commitment to the holistic growth and development of our people. Explore DU: The Leadership Center in India . Benefits To Help You Thrive At Deloitte, we know that great people make a great organization. Our comprehensive rewards program helps us deliver a distinctly Deloitte experience that helps that empowers our professionals to thrive mentally, physically, and financially—and live their purpose. To support our professionals and their loved ones, we offer a broad range of benefits. Eligibility requirements may be based on role, tenure, type of employment and/ or other criteria. Learn more about what working at Deloitte can mean for you. Recruiting tips From developing a stand out resume to putting your best foot forward in the interview, we want you to feel prepared and confident as you explore opportunities at Deloitte. Check out recruiting tips from Deloitte recruiters. Requisition code: 302241

Summary Position Summary Forecasting Data Scientist, Senior Consultant ConvergeCONSUMER ™ is a product-driven business that combines differentiated consumer insights with next-generation decision and experience platforms to help consumer-focused businesses optimize decision making and deliver personalized experiences to drive growth, consumer loyalty and profitability. We operate with the speed and agility of a startup, inside the world’s largest professional services firm. Work you’ll do Work with Product Managers/Owners to understand how products can be used and should be implemented to solve client problems. Work with Project Managers to understand client requirements and brainstorm on solutioning it, implement the assets/products as applicable. Perform exploratory data analysis on large datasets (several GB to TB) to define analytical models Apply data science/ML forecasting techniques to solve complex business problems, must have good understanding of Timeseries data and Demand Forecasting use cases Explain analytics model behavior / results in the vernacular of the market need Build, test, validate and demonstrate analytical models through various relevant error metrics and calibration techniques. Present the forecasting accuracy results to the client team. Deploy models into production Provide feedback to product team to improvise the products. Consistently strive to acquire new skills on AI / ML, Cloud, Big Data technologies Support and coach your team on best coding practices, development tools, and pathfinding and surveys for technologies Ensure SDLC best practices and standards are followed Qualifications And Experience Required: Bachelor’s Degree in a relevant field from a top-tier university; Advanced Degree (Bachelors/ Masters) in a relevant field is a plus 3-5+ years’ experience leading / implementing data science solutions. Must have working experience on Timeseries data and Demand Forecasting use cases Experience developing, implementing and maintaining machine learning and advanced statistical algorithms Deep understanding of data science principles, including machine learning, deep learning and artificial intelligence concepts Experience working with large quantitative and qualitative datasets both hands on and managing teams doing the work Proven skills in Python, PySpark, SQL is a must have Experience with BI/analytics tools, such as Tableau, PowerBI , or similar tools is an added advantage Experience using statistical computer languages to prepare data for analysis, visualize data as part of exploratory analysis, generate features, and other similar data science driven data handling Experience working with data science tools, Sklearn, Regression, classification models Experience in cloud-based eco-systems such GCP, AWS, or Azure for development and deployment of models Familiarity with consumer related data and a general interest in the retail, consumer products manufacturing, automotive, transportation, or hospitality sectors Strong storytelling skills with experience presenting to large technical and non-technical audiences A desire to take initiative and continuously work on improving the products you handle Highly self-motivated, energetic, passionate team-oriented personality and working style Strong analytical background combined with solid business experience Demonstrated ability to work effectively across time zones How You’ll Grow At Deloitte, we’ve invested a great deal to create a rich environment in which our professionals can grow. We provide our professionals with a variety of learning and networking opportunities, some of which are: Intensive trainings on latest technologies from eminent external trainers. Internal trainings and workshops. Subscriptions to prominent online training platforms, such as Lynda. Hackathons and tech challenges to exercise your front-end skills. Freedom to adopt and use the latest technologies in your live projects. Travel opportunity (wherever possible) to work at the client’s location or at our global offices. Apart from the above, you will have access to DU: The Leadership Center in India, our state-of-the-art, world-class learning Center in the Hyderabad offices is an extension of the DU in Westlake, Texas, and represents a tangible symbol of our commitment to our people’s growth and development. Explore DU: The Leadership Center in India Benefits At Deloitte, we know that great people make a great organization. We value our people and offer employees a broad range of benefits. Learn more about what working at Deloitte can mean for you. Deloitte’s culture Our positive and supportive culture encourages our people to do their best every day. We celebrate individuals by recognizing their uniqueness and offering them the flexibility to make daily choices that can help them to be healthy, centered, confident, and aware. We offer comprehensive well-being programs and are continuously looking for new ways to maintain a culture that is inclusive, invites authenticity, leverages our diversity, and where our people excel and lead happy lives. Learn more about Life at Deloitte. Corporate citizenship Deloitte is led by a purpose: to make an impact that matters. This purpose defines who we are and extends to relationships that we have with our clients, our people and our communities.We believe that business has the power to inspire and transform. We focus on education, giving, skill-based volunteerism, and leadership to help drive positive social impact in our communities. Learn more about Deloitte’s impact on the world. #I&T Our purpose Deloitte’s purpose is to make an impact that matters for our people, clients, and communities. At Deloitte, purpose is synonymous with how we work every day. It defines who we are. Our purpose comes through in our work with clients that enables impact and value in their organizations, as well as through our own investments, commitments, and actions across areas that help drive positive outcomes for our communities. Our people and culture Our inclusive culture empowers our people to be who they are, contribute their unique perspectives, and make a difference individually and collectively. It enables us to leverage different ideas and perspectives, and bring more creativity and innovation to help solve our clients' most complex challenges. This makes Deloitte one of the most rewarding places to work. Professional development At Deloitte, professionals have the opportunity to work with some of the best and discover what works best for them. Here, we prioritize professional growth, offering diverse learning and networking opportunities to help accelerate careers and enhance leadership skills. Our state-of-the-art DU: The Leadership Center in India, located in Hyderabad, represents a tangible symbol of our commitment to the holistic growth and development of our people. Explore DU: The Leadership Center in India . Benefits To Help You Thrive At Deloitte, we know that great people make a great organization. Our comprehensive rewards program helps us deliver a distinctly Deloitte experience that helps that empowers our professionals to thrive mentally, physically, and financially—and live their purpose. To support our professionals and their loved ones, we offer a broad range of benefits. Eligibility requirements may be based on role, tenure, type of employment and/ or other criteria. Learn more about what working at Deloitte can mean for you. Recruiting tips From developing a stand out resume to putting your best foot forward in the interview, we want you to feel prepared and confident as you explore opportunities at Deloitte. Check out recruiting tips from Deloitte recruiters. Requisition code: 302269

Summary Position Summary Forecasting Data Scientist, Senior Consultant ConvergeCONSUMER ™ is a product-driven business that combines differentiated consumer insights with next-generation decision and experience platforms to help consumer-focused businesses optimize decision making and deliver personalized experiences to drive growth, consumer loyalty and profitability. We operate with the speed and agility of a startup, inside the world’s largest professional services firm. Work you’ll do Work with Product Managers/Owners to understand how products can be used and should be implemented to solve client problems. Work with Project Managers to understand client requirements and brainstorm on solutioning it, implement the assets/products as applicable. Perform exploratory data analysis on large datasets (several GB to TB) to define analytical models Apply data science/ML forecasting techniques to solve complex business problems, must have good understanding of Timeseries data and Demand Forecasting use cases Explain analytics model behavior / results in the vernacular of the market need Build, test, validate and demonstrate analytical models through various relevant error metrics and calibration techniques. Present the forecasting accuracy results to the client team. Deploy models into production Provide feedback to product team to improvise the products. Consistently strive to acquire new skills on AI / ML, Cloud, Big Data technologies Support and coach your team on best coding practices, development tools, and pathfinding and surveys for technologies Ensure SDLC best practices and standards are followed Qualifications And Experience Required: Bachelor’s Degree in a relevant field from a top-tier university; Advanced Degree (Bachelors/ Masters) in a relevant field is a plus 3-5+ years’ experience leading / implementing data science solutions. Must have working experience on Timeseries data and Demand Forecasting use cases Experience developing, implementing and maintaining machine learning and advanced statistical algorithms Deep understanding of data science principles, including machine learning, deep learning and artificial intelligence concepts Experience working with large quantitative and qualitative datasets both hands on and managing teams doing the work Proven skills in Python, PySpark, SQL is a must have Experience with BI/analytics tools, such as Tableau, PowerBI , or similar tools is an added advantage Experience using statistical computer languages to prepare data for analysis, visualize data as part of exploratory analysis, generate features, and other similar data science driven data handling Experience working with data science tools, Sklearn, Regression, classification models Experience in cloud-based eco-systems such GCP, AWS, or Azure for development and deployment of models Familiarity with consumer related data and a general interest in the retail, consumer products manufacturing, automotive, transportation, or hospitality sectors Strong storytelling skills with experience presenting to large technical and non-technical audiences A desire to take initiative and continuously work on improving the products you handle Highly self-motivated, energetic, passionate team-oriented personality and working style Strong analytical background combined with solid business experience Demonstrated ability to work effectively across time zones How You’ll Grow At Deloitte, we’ve invested a great deal to create a rich environment in which our professionals can grow. We provide our professionals with a variety of learning and networking opportunities, some of which are: Intensive trainings on latest technologies from eminent external trainers. Internal trainings and workshops. Subscriptions to prominent online training platforms, such as Lynda. Hackathons and tech challenges to exercise your front-end skills. Freedom to adopt and use the latest technologies in your live projects. Travel opportunity (wherever possible) to work at the client’s location or at our global offices. Apart from the above, you will have access to DU: The Leadership Center in India, our state-of-the-art, world-class learning Center in the Hyderabad offices is an extension of the DU in Westlake, Texas, and represents a tangible symbol of our commitment to our people’s growth and development. Explore DU: The Leadership Center in India Benefits At Deloitte, we know that great people make a great organization. We value our people and offer employees a broad range of benefits. Learn more about what working at Deloitte can mean for you. Deloitte’s culture Our positive and supportive culture encourages our people to do their best every day. We celebrate individuals by recognizing their uniqueness and offering them the flexibility to make daily choices that can help them to be healthy, centered, confident, and aware. We offer comprehensive well-being programs and are continuously looking for new ways to maintain a culture that is inclusive, invites authenticity, leverages our diversity, and where our people excel and lead happy lives. Learn more about Life at Deloitte. Corporate citizenship Deloitte is led by a purpose: to make an impact that matters. This purpose defines who we are and extends to relationships that we have with our clients, our people and our communities.We believe that business has the power to inspire and transform. We focus on education, giving, skill-based volunteerism, and leadership to help drive positive social impact in our communities. Learn more about Deloitte’s impact on the world. #I&T Our purpose Deloitte’s purpose is to make an impact that matters for our people, clients, and communities. At Deloitte, purpose is synonymous with how we work every day. It defines who we are. Our purpose comes through in our work with clients that enables impact and value in their organizations, as well as through our own investments, commitments, and actions across areas that help drive positive outcomes for our communities. Our people and culture Our inclusive culture empowers our people to be who they are, contribute their unique perspectives, and make a difference individually and collectively. It enables us to leverage different ideas and perspectives, and bring more creativity and innovation to help solve our clients' most complex challenges. This makes Deloitte one of the most rewarding places to work. Professional development At Deloitte, professionals have the opportunity to work with some of the best and discover what works best for them. Here, we prioritize professional growth, offering diverse learning and networking opportunities to help accelerate careers and enhance leadership skills. Our state-of-the-art DU: The Leadership Center in India, located in Hyderabad, represents a tangible symbol of our commitment to the holistic growth and development of our people. Explore DU: The Leadership Center in India . Benefits To Help You Thrive At Deloitte, we know that great people make a great organization. Our comprehensive rewards program helps us deliver a distinctly Deloitte experience that helps that empowers our professionals to thrive mentally, physically, and financially—and live their purpose. To support our professionals and their loved ones, we offer a broad range of benefits. Eligibility requirements may be based on role, tenure, type of employment and/ or other criteria. Learn more about what working at Deloitte can mean for you. Recruiting tips From developing a stand out resume to putting your best foot forward in the interview, we want you to feel prepared and confident as you explore opportunities at Deloitte. Check out recruiting tips from Deloitte recruiters. Requisition code: 302269

Job Title: Quality Assurance (QA) Officer Company: ECO Paryavaran Laboratories and Consultants Pvt. Ltd. Location: Mohali, Punjab Job Type : Full-time, Permanent About the Role: ECO Paryavaran Laboratories and Consultants Pvt. Ltd., a leading NABL-accredited environmental testing and consultancy organization, is seeking an experienced Quality Assurance (QA) Officer to support and enhance its quality systems in alignment with ISO/IEC 17025:2017 standards. Qualifications: B.Sc. or M.Sc. in Chemistry, Environmental Science, or a related field. Minimum 2 years of hands-on QA experience in a NABL-accredited laboratory. In-depth knowledge of ISO/IEC 17025:2017 standards and NABL accreditation procedures. Key Responsibilities: Develop, maintain, and update the Quality Management System (QMS), including the Quality Manual, Standard Operating Procedures (SOPs), formats, and other quality documentation. Plan and conduct internal audits, manage non-conformities, and implement effective Corrective and Preventive Actions (CAPA). Prepare for and coordinate NABL assessments and other external audits. Maintain training records and competency evaluations of laboratory personnel. Review test reports, calibration certificates, and quality control data to ensure accuracy and compliance. Monitor and record environmental conditions of the lab, ensuring compliance with method validation and equipment calibration requirements. Ensure traceability of data and timely documentation across all QA-related activities. Drive continual improvement initiatives within the laboratory and ensure adherence to ISO/IEC 17025:2017. Organize and facilitate training programs on quality standards and ISO/IEC 17025 requirements. Monitor laboratory operations regularly to verify ongoing compliance with NABL and other regulatory standards. Oversee the retention, traceability, and confidentiality of quality records. Preferred Skills: Strong attention to detail and organizational skills. Ability to work independently and collaboratively across teams. Effective communication and documentation skills. Familiarity with laboratory information management systems (LIMS) is an advantage. Job Type: Full-time Pay: ₹15,000.00 - ₹25,000.00 per month Benefits: Cell phone reimbursement Health insurance Leave encashment Provident Fund Schedule: Day shift Ability to commute/relocate: Mohali, Punjab: Reliably commute or planning to relocate before starting work (Preferred) Application Question(s): Do you have experience of working in NABL accredited LAB? Experience: total work: 2 years (Preferred) Work Location: In person

Job Description: · Overall process control responsibility in the molding and melting area defined by the QC department. · Ensure daily molding machine calibration and optimum use of molding chemicals. Conduct trials of raw material for alternate cost-competitive solutions. I.e., resin, hardener, mold paint, and furnace ramming mass. · Ensure all melting and molding parameters are optimized when needed. · Work as a reliever in molding and melting departments. · Conduct trials in the molding and melting department (yield improvement, Pattern modification) · Implement best foundry practices. · Report all daily rejections and ensure all corrective actions are taken by the team. Highlight the issue related to the process/product. · Ensure all PPE’s compliance for shop floor workers. (i.e., safety shoes, gloves, goggles, etc.) · Support cost reduction activities. Qualification requirement: · B.E./diploma in foundry technology (preferably NIFFT Ranchi), mechanical engineering, or metallurgical engineering. · 3-4 years of shop floor foundry experience in the molding and melting department. · Previously worked with Mn steel and high chrome castings. · Have knowledge of sand systems and melting. · Able to work in shifts when required. · Basic computer skills.

To ensure incoming raw materials and components meet quality standards before being accepted for production. To monitor outsourced job work components upon receipt to verify compliance with specified requirements. To perform in- process inspection at difference stage -Machining, Forming, heat treatment & Assembly. To identify defective or non-conforming parts and separate them with proper tagging. To inform the supervisor or department in-charge if process variation or repeated defect is noticed. To inspect final assembled chains or conveyors before dispatch. To check for fitment, alignment, movement, and visual appearance of final products. To follow sampling plans, QC procedures, and safety standards. To assist in calibration of measuring tools and maintain them in proper condition. To coordinate with production and stores for quality holds, rework, or scrap approvals. To help ensure ISO or internal audit readiness by maintaining required documentation. To coordinate with HODs, job workers, and outsourcing vendors to address quality concerns. To work closely with the production team to align quality standards with manufacturing processes. To maintain data security and confidentiality, and live by the HR Policy. To provide reports to the Quality Manager/GM on a timely basis. Job Types: Full-time, Permanent Pay: Up to ₹20,000.00 per month Application Question(s): How many years of total work experience do you have? Do you speak English? What is your Expected CTC? Education: Secondary(10th Pass) (Preferred) Location: Kothariya, Rajkot, Gujarat (Preferred) Work Location: In person

Job Description Role Overview: The Maintenance Engineer will be responsible for the maintenance, troubleshooting, and repair of all critical systems of the entire CVD lab facility. This includes CVD reactors, gas generators, chillers, vacuum pumps, UPS, generators, and electrical connections. The ideal candidate will have experience in electrical, mechanical, and systems engineering, and be proficient in maintaining complex laboratory equipment to minimize downtime and maximize operational efficiency. Key Responsibilities: 1. CVD Equipment Maintenance: Perform routine preventive maintenance, calibration, and repairs on all CVD reactors, gas delivery systems, vacuum pumps, mass flow controllers, hydrogen generator and other related equipment. Troubleshoot and resolve mechanical, electrical, and pneumatic issues to ensure optimal performance of CVD systems. 2. Chillers and Cooling Systems: Maintain and troubleshoot industrial chillers, cooling towers, process pumps, air conditioning systems and associated temperature regulation systems to ensure proper functioning of equipment that requires stable thermal conditions. Monitor fluid levels, pressure, and temperature to prevent overheating and downtime in sensitive CVD processes. 3. Power Supply and Backup Systems: Ensure the reliability and functionality of uninterruptible power supply (UPS) systems and backup generators, conducting routine inspections, battery tests, and load tests to prevent power interruptions. Troubleshoot electrical faults, test power systems, and ensure correct operation of electrical switches, circuit breakers, and power distribution units. 4. Electrical and Mechanical Systems Maintenance: Maintain and repair electrical connections, distribution panels, and circuit boards, ensuring compliance with safety regulations and minimizing electrical failures. Oversee the maintenance of pneumatic systems, compressors, and other mechanical equipment used in the lab. 5. Equipment Troubleshooting and Fault Diagnosis: Respond promptly to equipment breakdowns, performing diagnostics and root cause analysis to identify and resolve issues quickly. Work with external service providers when necessary to ensure timely repairs and replacements. 6. System Upkeep & Monitoring: Regularly inspect and monitor the functionality of all laboratory systems, including cooling, power, gas flow, vacuum pumps etc, ensuring all equipment is operating within specified parameters. Implement condition-based monitoring strategies and provide reports for continuous performance improvement. 7. Documentation & Reporting: Maintain accurate maintenance records, logbooks. Manage inventory for spare parts and equipment. Supervision of maintenance related vendor projects. Prepare maintenance schedules, track service requests, and report on equipment performance, compliance, and operational incidents. 8. Safety & Compliance: Ensure all maintenance work is performed in compliance with laboratory safety protocols, environmental regulations, and operational standards. Follow best practices for handling hazardous materials, including gases and chemicals, and ensure that all systems meet the required safety and compliance regulations. 9. Collaboration, Training and Team management: Collaborate closely with laboratory scientists, engineers, and technicians to address equipment-related challenges and optimize operational efficiency. Lead a team of technicians, prepare shift schedules, provide training and technical support to laboratory staff on the operation and basic troubleshooting of lab equipment and systems. 10. Continuous Improvement: Identify opportunities for improving the efficiency and reliability of lab equipment and infrastructure. Suggest and implement improvements or upgrades to systems such as the electrical setup, UPS, or cooling systems to reduce downtime or enhance performance. • Education: ° Bachelor’s or Master’s degree in Mechanical Engineering, Electrical Engineering, Industrial Engineering, or a related field. ° Certification or training in industrial maintenance or electrical systems is a plus. • Experience: ° Minimum 3-5 years of hands-on maintenance experience, preferably in a high-tech laboratory or industrial setting. ° Experience with the maintenance and repair of CVD equipment, chillers, electrical systems, UPS, and generators. ° Familiarity with vacuum systems, gas handling, refrigeration, and HVAC systems is highly desirable. • Skills & Competencies: ° Strong knowledge of electrical, mechanical, and instrumentation systems, with expertise in industrial cooling systems and power supply systems (UPS, generators). ° Experience with preventive maintenance, fault diagnosis, and troubleshooting complex systems. ° Solid understanding of power distribution, wiring, circuit breakers, and electrical connections. ° Ability to interpret technical manuals, schematics, and wiring diagrams. ° Excellent communication and interpersonal skills, with the ability to work collaboratively across departments. ° Proficiency in inventory management, scheduling, and maintenance reporting systems. ° Familiarity with lab safety standards and hazardous material handling. ° Proficiency in using diagnostic tools, meters, and lab equipment. ° Excellent problem-solving skills, attention to detail. Working Conditions: · Full-time, on-site position in 24x7 running facility. · This position may require standing for extended periods and working in a cleanroom environment · Willingness to work flexible hours or shifts as required · Exposure to high-voltage electrical systems, cooling equipment, chemicals, and laboratory machinery. · Ability to work in a cleanroom environment and follow strict contamination control protocols. Job Location: Bengaluru, Karnataka. Job Type: Full-time Pay: From ₹480,000.00 per year Benefits: Health insurance Leave encashment Work Location: In person Expected Start Date: 29/07/2025

🔯 Position:- QC EXECUTIVE 🔯 Location:- TALOJA 🔯 Salary:- UPTO 4.2 LPA 🔯 Experience:- Min. 5 YEARS 🔯 Education:- - B.Sc in Chemistry Key Responsibilities:- ☀️ Perform routine quality inspections on raw materials, in-process and finished products. ☀️ Ensure compliance with company standards, ISO norms, and industry regulations. ☀️ Document all test results and quality checks; maintain accurate records. ☀️ Identify and report deviations, non-conformities, and assist in corrective actions. ☀️ Support audit processes (internal and external) with relevant documentation. ☀️ Collaborate with Production, R&D, and QA teams to maintain consistent quality. ☀️ Calibrate and maintain laboratory equipment and testing tools. ☀️ Train and mentor junior QC staff when required. Skills: quality control,mentoring,chemistry,audit support,quality inspections,iso compliance,deviation reporting,calibration,training,collaboration,documentation,chemical industry

Key Responsibilities: 1. Develop and implement quality management systems (QMS) compliant with ISO 13485 and FDA regulations 2. Conduct audits and inspections to ensure compliance with quality standards. 3. Manage corrective and preventive actions (CAPA) and implement quality improvements. 4. Get all the compliance, licensing, audits done under his responsibility. Regulatory Affairs: 1. Ensure compliance with regulatory requirements for medical devices, including FDA, CE, and other relevant regulations. 2. Manage regulatory submissions 3. Monitor and analyze regulatory changes and updates, and implement necessary changes. 4. Collaborate with teams to ensure labeling and advertising compliance. Requirements: 1. Bachelor's degree in a relevant field (e.g., engineering, science). 2. Experience in quality assurance and regulatory affairs in the medical device industry. 3. Experience with calibration, validation, SOP, BMR, MFR, QMS standards (ISO 13485) and regulatory requirements (FDA, CE). 4. Strong analytical and problem-solving skills. 5. Excellent communication and leadership skills.

Department: Quality Control & Assurance Experience: 10–15 Years Industry: Polymers / Plastics / Chemicals / Manufacturing Open Position 1 Role Overview We are looking for an experienced and technically strong Quality Manager to lead the Quality Control (QC) and Quality Assurance (QA) functions at our manufacturing facility. The ideal candidate must have deep knowledge of quality protocols related to Nylon 6, Nylon 66, and PBT compounds in unfilled , glass/mineral filled , and FR (flame retardant) grades. The Quality Manager will lead and oversee all quality assurance and control processes within production, R&D, and dispatch. You will ensure batch‑to‑batch consistency, full compliance with IATF 16949/ISO 9001 standards, and continuous product excellence for engineering polymer compounds. Key Responsibilities Quality System Leadership : Maintain and continuously improve IATF 16949/ISO 9001 quality systems. Conduct internal audits; support third‑party certification audits. Production Quality Control : Supervise online testing every 3 hours across shifts; ensure raw materials, in‑process, and finished goods meet specs. Analyse QC data; identify trends and non‑conformances, and drive corrective/preventive action. Laboratory Management : Oversee in‑house lab testing (thermal, mechanical, rheological, etc.) using computerized equipment Ensure calibration, traceability, and quality control of lab tests. Coordination & Training : Work cross-functionally with production, R&D, supply chain, engineering, and dispatch. Lead, train, and mentor QC engineers and technicians; ensure skill development. Documentation & Reporting : Ensure all SOPs, technical docs, batch records, and QC results are accurate and timely. Prepare quality reports for management. Supplier Quality Management : Evaluate and qualify raw material/additive vendors. Drive supplier audits, non-conformance resolution, and performance improvement. Customer & Regulatory Interface : Support customer audits, ensure timely complaint investigations, root-cause analysis, and customer feedback resolution. Ensure regulatory compliance (RoHS, REACH, automotive, etc.). Essential Qualifications Master’s degree in Polymer/Chemical Engineering is must. 10+ years QA/QC experience in polymer compounding, plastics, or manufacturing, with 5+ in a leadership role. Strong knowledge of IATF 16949 & ISO 9001. Hands-on experience with thermal, mechanical, and rheological testing equipment. Proficient in quality tools: FMEA, SPC, 8D, RCCA, statistical data analysis. Excellent leadership, communication, and cross-functional coordination skills. · *** Candidates only from near by location or willing to relocate may apply. Bonus Attributes Deep understanding of engineering polymers: PA6/66, PBT, polymer alloys. Experience in German compounding technology. Familiarity with automotive, electrical, appliance, telecom, or furniture sector standards. Compensation & Benefits Competitive CTC with performance incentives. Opportunity to work with high‑tech polymer development at a leading IATF‑certified company. Career growth alongside polymer engineers, technocrats, and multidisciplinary leadership How to Apply Send your resume and cover letter to hr@klontekno.com , or call +91 9599143888 Why This Role Matters You’ll be at the helm of quality excellence—ensuring each polymer batch aligns with K‑LON’s mission of delivering customer‑centric, innovative polymer solutions. Your leadership will support their growing global footprint and reputation for precision and consistency. Job Types: Full-time, Permanent Pay: ₹50,000.00 - ₹70,000.00 per month Ability to commute/relocate: Palghar, Maharashtra: Reliably commute or planning to relocate before starting work (Preferred) Experience: QC: 10 years (Preferred) QC head or QC Manager: 6 years (Preferred) Language: English, Hindi (Preferred) Work Location: In person

Position: Digital Printing Operator Type: Full-Time Location: Delhi, Daryaganj Experience Level: Experienced (minimum 2 years) Salary : 15k to 30k per month basis experience and skills Key Responsibilities Digital Printing Operations : Operate and maintain digital printing machines, especially Konika 6000, ensuring high-quality outputs. Prepare files for printing, including color correction and layout adjustments. Monitor print jobs to ensure consistency, accuracy, and timely completion. Lamination : Perform lamination processes using various materials and techniques (hot/cold lamination). Ensure laminated products meet quality and durability standards. Equipment Maintenance : Perform regular cleaning, calibration, and minor repairs on printing, lamination, and cutting equipment. Report major equipment issues to the technical team for resolution. Quality Control : Inspect finished products to ensure they meet quality expectations and company standards. Identify and rectify defects in printing, lamination, or cutting processes. Collaboration and Coordination : Work closely with designers, production teams, and partners to understand project requirements. Manage production schedules to meet deadlines without compromising quality. Required Skills & Qualifications Technical Expertise : Hands-on experience with digital printing equipment (e.g., Konika 6000 or similar brands). Knowledge of lamination techniques and materials. Familiarity with plotter cutting machines such as Roland, Graphtec, or Cricut. (optional) Software Skills : Proficiency in graphic design software such as CorelDRAW, or similar. Ability to work with various file formats like PDFs, SVGs, and vector graphics. Additional Skills : Strong attention to detail and ability to maintain high-quality standards. Problem-solving skills for troubleshooting equipment and production issues. Ability to work in a fast-paced environment and manage multiple tasks. Preferred Qualifications Prior experience in a commercial printing environment. Understanding of colour management and calibration processes. Why Join Us? Be part of a creative and supportive team environment. Opportunities for skill development and career growth. Application Process Interested candidates are requested to send their resumes along with a portfolio of relevant work to Careers@thewisesteps.com. Selected applicants will be contacted for a hands-on test and interview. If you are shortlisted for interview, please bring supported documentation to validate existing salary along with the resume. Job Type: Full-time Pay: ₹12,000.00 - ₹30,000.00 per month Application Question(s): Based at Delhi/NCR Work Location: In person Application Deadline: 25/07/2025

Job description Job Title: Quality Control Engineer – Solar Panel Manufacturing Company Name: Junna Solar Systems Limited Job Location: Chandanvelly, Hythabad Employment Type: Full-Time | On-site Experience Required: 4–5 Years in Quality Control in Solar Panel / Electronic / Renewable Energy Manufacturing Industry Qualification: Bachelor’s Degree in Electrical / Mechanical / Electronics Engineering or relevant technical field Industry Type: Renewable Energy / Solar Panel Manufacturing Department: Quality Assurance / Quality Control Job Summary: As a QC Engineer, you will ensure that all solar PV modules and related components meet industry quality standards from incoming raw materials through production and final shipment. You will perform inspections, oversee test procedures, resolve quality issues, and maintain compliance with IEC and ISO standards. Key Responsibilities: · Inspect raw materials, mechanical structures, and electronic parts for compliance. · Conduct in-process and post-production inspections for solar panel lines. · Perform EL testing, IV curve tracing, insulation resistance checks, and other reliability tests. · Maintain detailed quality records, inspection reports, and non-conformance logs. · Lead root cause analysis and implement corrective/preventive actions (CAPA). · Coordinate with Production, R&D, and Purchase departments to maintain quality throughout the supply chain. · Prepare and support internal and external quality audits (ISO/IEC/Customer). · Ensure implementation of ISO 9001, IEC 61215/61730, and other relevant standards. · Support calibration and maintenance of testing instruments. · Train line operators on standard inspection techniques and quality awareness. Required Skills: · In-depth knowledge of IEC 61215/61730 testing and certification for solar PV modules. · Strong analytical skills with hands-on experience in 8D, 5 Why, FMEA, Root Cause Analysis. · Proficiency with tools like vernier calipers, multimeters, sun simulators, EL testers. · Familiarity with ERP/QMS software and quality documentation systems. · Good communication and reporting skills. · Team-oriented, with the ability to work cross-functionally. Equipment & Tools Knowledge: · Sun Simulator / IV Curve Tracer · EL Tester · IR Camera · Hi-pot / Insulation Resistance Tester · Vernier, Micrometer, Torque Tools · SPC/ERP software

Job Summary: The QA/QC Documentation Specialist is responsible for maintaining and managing quality-related documentation to ensure compliance with regulatory standards in a medical equipment manufacturing environment. This role supports the Quality Assurance and Quality Control teams in the preparation, review, and control of documentation that ensures consistent product quality and regulatory compliance. Key Responsibilities: Maintain and update Quality Management System (QMS) documentation, including SOPs, work instructions, quality manuals, forms, and logs. Review and process quality documentation such as batch records, device history records (DHRs), calibration logs, and validation reports. Ensure all controlled documents are accurate, up-to-date, properly archived, and accessible as per internal policies and regulatory requirements. Assist in document change control processes, including initiation, tracking, and implementation of document revisions. Support internal and external audits by organizing and presenting required quality documentation. Coordinate with cross-functional teams (production, engineering, regulatory affairs, etc.) to gather documentation and ensure timely updates. Monitor and report document compliance issues or deviations and help initiate corrective actions. Train staff on documentation control procedures and compliance requirements as necessary.

To do screening, diagnostic tests for patients of hearing loss and sell hearing aids. Duties and responsibilities To do screening of the ear and hearing assessment of the incoming patients Do Pure tone audiometry and reporting for the cases who need the test and /or advised for Explain the customer/patient about their need of Hearing aid and should be able to sell them Hearing Aid trial, Hearing aid fitment – to be done based on the need and demand of the customer Taking ear moulds – for customisation of hearing aids If needed, should be flexible to do Tele-audiometry tests ( ie. Virtually) Doctor and other staff engagement in the premises/nearby Should be able to do OAE and reporting of the same Authorities Make appropriate, timely and safe decisions on the management plan of the beneficiaries/customers in coordination with department protocols. Qualifications / Certifications: Education: BASLP and/or MASLP Minimum 1 yr of experience/ more than 300 hours of experience in Pure tone audiometry, calibration and reporting Skills & Abilities: o Good understanding of the devices o Proficient sale pitch o Excellent Communication skills (written & verbal) o Good interpersonal skills o Good judgement at identifying the need of the customer/patient o Proficiency in MS Office (Word, Excel and Power point) o Language proficiency - English, Hindi Experience: fresher/ 1-2 years experience Working conditions Should be open to work in rotational shifts as per the project when required Should be open to travel for executing the job responsibilities of conducting camps Should be open for doing Hearing Aid trials/ fitment – at home for older people Job Type: Full-time Pay: Up to ₹50,000.00 per month Benefits: Health insurance Provident Fund Ability to commute/relocate: Hyderabad, Telangana: Reliably commute or planning to relocate before starting work (Required) Experience: total work: 1 year (Preferred) Work Location: In person

Location : Rajpura City : Rajpura State : Punjab (IN-PB) Country : India (IN) Requisition Number : 39976 Business Title: Technician – Packing Location: Rajpura Department: Packing Main Accountabilities Set up machines (calibration, cleaning etc.) to start a production cycle. Control and adjust machine settings (e.g., speed). Fix issues that might occur during the shift. Knowledge of equipment operating through PLC. Check output to spot any machine-related mistakes or flaws. Keep records of approved and defective units or final products. Able to maintain all records and documents having basic knowledge of computer. Weigh and label packaged goods ready for dispatch. Knowledge of handling homogenizer, pasteurizer & PHE operations, printers and metal detectors. Health, Safety and Environment: Identify and report health or safety hazards & dangerous situations and put appropriate control measures in place. Ensure LOTO is followed by all, training others as required. Be a Company Contact in their area. Encourages ALL to behave in a safe manner and challenges unsafe behavior. Carry out cleaning with knowledge of handling the chemicals in the line (Caustic, Nitric etc.) to operate the CIP and basic maintenance of work areas and the machines. Quality: Ensure equipment is capable to manufacture products in accordance with quality procedures and standards, using process control techniques where applicable. Perform agreed Quality improvement activities monitoring and controlling key process parameters to measure success where applicable. Storage of ingredients as per FSSC standard, issue, use and consumption of ingredients as per FIFO/FEFO. Daily reconciliation of RM/PM in log sheet to ensure the right quantity uses of ingredients in manufactured batches. Kean knowledge of batch traceability, capsuling, record keeping etc. Knowledge of Food Safety Management system (HACCP, PRP, OPRP, CCP and other food fraud controls) Measure, grade and feed batches of raw materials into production machinery/process. Monitor the production processes and carry out basic testing and quality checks. Ensure all external and internal auditory standards and improvement requirements are met. Customer Service includes: Priorities and complete improvement activities to improve equipment efficiencies with a view to increase overall department through-put. Perform improvement activities on changeover times to reduce losses per changeover. Identify and implement agreed improvement opportunities to increase the production plant flexibility. Cost: Lead improvement activities to improve efficiency and reduce costs, supporting operators to complete kaizens as required. Implement cost optimization activities eliminating losses that may not impact on OEE (e.g., yield, energy, and spare parts) 5S: Ensure 5S standards are clearly defined and followed in work area Ensure safe working practices are maintained and ‘Standard Operations’ adhered to. Contribute to continuous improvement activities. Autonomous Maintenance: Support the AM activities (e.g., cell meetings, step audits, board updating). Preventative Maintenance: Ensure breakdown analysis for all component failures using the EWO process and the implementation of countermeasures to eliminate root causes has been completed. Ensure the Key Performance Indicators (KPIs) are reviewed, and the gap analysis is carried out on a regular basis to understand and input into the improvement plan. Focused Improvement: Ensure the losses are being recorded and classified accurately challenging and supporting others to correct errors. Regularly monitor and analyses unit loss trees to identify loss pattern and take action to eliminate gap. Identify and lead improvements from top loss re-occurring breakdowns. Knowledge and Skills: Sound knowledge of Processing, Production & Packing Technologies (Whip toppings, cooking cream, dairy analogues, bakery mixes, confectionery, and decorations, culinary, Proprietary Foods etc. Hands on experience in Manufacturing & Trouble Shooting of whip topping, fat emulsions etc. Good knowledge on Food Safety, Process & Quality Assurance aspects, Food Safety, GMP of Food Products. Other requirements: Shall be flexible and mobile. Educational Qualifications: ITI from Government institute. Experience: 2 to 5 Years of Ice cream/Dairy/Juice/Nondairy whip topping/Edible Oil/Vegetable Fat plant operation with hands on experience in manufacturing and filling. Bunge (NYSE: BG) is a world leader in sourcing, processing and supplying oilseed and grain products and ingredients. Founded in 1818, Bunge’s expansive network feeds and fuels a growing world, creating sustainable products and opportunities for more than 70,000 farmers and the consumers they serve across the globe. The company is headquartered in St. Louis, Missouri and has 25,000 employees worldwide who stand behind more than 350 port terminals, oilseed processing plants, grain facilities, and food and ingredient production and packaging facilities around the world. Bunge is an Equal Opportunity Employer. Veterans/Disabled

Role Overview We are looking for an experienced embedded systems engineer to lead firmware development for energy-focused hardware systems. The role involves implementing low-level control logic, managing communication protocols, and ensuring system reliability in constrained environments. You’ll be working closely with a small cross-functional team across hardware, firmware, and backend to develop robust, real-time edge behaviors for field-deployed devices. Responsibilities • Develop and maintain embedded firmware on microcontrollers (e.g. STM32, ESP32, etc.) • Integrate serial communication protocols (UART, RS485, Modbus RTU/TCP) • Design and implement RTOS-based control flows for edge-level decision-making • Ensure firmware reliability through watchdogs, diagnostics, and OTA strategies • Optimize for memory, power, and compute-constrained environments • Collaborate with hardware and backend teams for testing, calibration, and deployment Required Skills • 4–8 years of experience in embedded C/C++ development • Hands-on experience with RTOS (FreeRTOS, Zephyr, or similar) • Strong understanding of embedded I/O, timers, interrupts, memory management • Familiarity with energy/IoT protocols like Modbus, CAN, or MQTT • Experience working with hardware tools: JTAG, logic analyzers, UART debug consoles Bonus (Not Required) • Experience with OTA firmware workflows • Exposure to power electronics, inverters, or industrial control systems • Basic familiarity with cloud or backend integration for IoT systems

Role Overview: We are looking for a dynamic and detail-oriented professional to manage the procurement, inventory, and financial workflows of our R&D Technology centre. This role serves as a critical bridge between the R&D, Supply Chain Management (SCM), and Finance & Accounts (F&A), ensuring seamless operations through timely procurement, resource planning, vendor management, and SAP-based transaction tracking. Key Responsibilities: 1. Lab Resource & Inventory Management Maintain optimal inventory of chemicals, consumables, and lab materials. Oversee instrument calibration, preventive maintenance, and AMC renewals. Track R&D centre resource status and compliance documentation. 2. Procurement Coordination Collaborate with SCM to source lab equipment, consumables, and services. Manage vendor follow-ups and delivery schedules. 3. SAP Transactions Create Goods Receipt Notes (GRNs) and Service Entry Sheets (SES). Ensure accurate and timely SAP entries for all procurement workflows. 4. Invoice & Payment Handling Coordinate with F&A for payment processing and invoice tracking. Resolve discrepancies in billing, deliveries, or services with vendors. 5. Vendor Management Build and maintain relationships with suppliers and service providers. Ensure vendor compliance with quality and contractual standards. 6. Documentation & Reporting Maintain organized records of GRNs, SES, invoices, and procurement files. Prepare regular reports on procurement status, budget usage, and vendor performance. Qualifications & Skills: Education: Bachelor’s/Master’s in Finance, Science, or Business Administration. Experience: 3–5 years in R&D related procurement, resource coordination, or lab operations; experience with SAP required. Skills: Proficiency in SAP and procurement lifecycle management. Strong communication, coordination, and organizational abilities. Attention to detail and ability to manage priorities in a fast-paced environment.

As a Technician with our team, you will play a crucial role in collecting and analyzing samples and data, along with conducting calibration and validation of laboratory procedures. Your responsibilities will also include documenting and reporting findings, providing exceptional customer service, and ensuring a clean and organized work environment. You will have the opportunity to work both independently and collaboratively within a team setting. We are seeking a candidate who possesses outstanding communication skills, can thrive under pressure in a fast-paced setting, and exhibits strong critical thinking and problems solving abilities. The role requires mandatory travel of a minimum of 15 to 20 kilometers per day, and candidates must have a two-wheeler with all necessary documents (Driving License, Insurance, Emission Test live papers). Working six days a week is compulsory in this position. A friendly and dedicated approach towards doctors and patients is essential, as you will be responsible for performing Hyperurecemia tests and maintaining equipment by adhering to operating instructions. Taking ownership and responsibility for the processes is a key aspect of this role. While a Bachelor's degree in a technical or scientific field is preferred, individuals with relevant experience and skills are encouraged to apply. To express your interest in this opportunity, please send an email to ishwarya.ayyadurai@porteamedical.com or contact 8098407707. This is a full-time, permanent position with benefits including health insurance, life insurance, and Provident Fund. The work location is in person.,

You are competent in two engineering disciplines and possess thorough site knowledge. Your responsibilities include diagnosing and correcting equipment problems, maintaining facilities, and production equipment. You will also be involved in installation, testing, inspecting, and commissioning new electrical equipment, calibration of instrumentation, and rectification of regulatory deviations. Accountability is key as you will be responsible for maintaining and documenting maintenance work, improving maintenance procedures in compliance with GMP, and communicating effectively any issues during handover. Feedback on completed engineering tasks, including root causes and outstanding issues, is essential. You will be expected to use various systems such as WORKMATE, EDMS, BEAMEX, DRAWING DATABASE, MYPIRAMAL, and MICROSOFT OFFICE for different tasks. Additionally, following site systems for change control, safety, risk assessment, and waste handling is crucial in day-to-day activities. As part of your critical tasks, you must work safely, follow isolation procedures, participate in ESH tours and risk assessments, and attend mandatory training. Planning and scheduling tasks with customer departments, working autonomously, and supervising contractors are also part of your responsibilities. Essential qualifications for this role include BS:7671 18th Edition Wiring regulations, Compex certification, apprenticeship in electrical maintenance, and HNC qualification. Relevant experience in maintaining and installing electrical items, reading engineering drawings, and fault finding is required, along with pharmaceutical or chemical production experience. Piramal Group, where this job is situated, has a history of pursuing organic and inorganic growth strategies while upholding core values and inclusive practices. The organization values equal employment opportunities, making decisions based on merit and providing equal opportunities for all applicants and employees. Piramal Pharma Solutions (PPS) is a Contract Development and Manufacturing Organization (CDMO) offering a wide range of services across the drug life cycle. With a global network of facilities, PPS provides solutions in drug discovery, pharmaceutical development, clinical trial supplies, APIs, finished dosage forms, and specialized services like highly potent APIs, biologics, and more. As an integral part of the engineering team at Piramal Pharma Solutions, you will play a vital role in ensuring the efficiency, safety, and compliance of the operation. Your expertise and experience will contribute to the success of the organization's goals and objectives. This full-time engineering position is located at Whalton Road, Morpeth, United Kingdom, with the job identification number 6610.,

You should have at least 5 years of experience in instrumentation for utility projects. A B.E./B.Tech degree in Instrumentation, Electronics, or Electrical is required for this role. Your responsibilities will include implementing instrumentation and control systems according to project specifications and operational requirements. You will need to integrate SCADA and PLC-based systems to achieve efficient process automation and real-time control. Calibrating, testing, and diagnosing instrumentation devices for accurate performance and reliability will also be part of your duties. Monitoring control systems for uptime and efficiency, while ensuring minimal downtime, is crucial. You will also be responsible for maintaining documentation, including control logic, wiring diagrams, and panel layouts. Collaborating with engineering, operations, and maintenance teams to enhance system performance is a key aspect of this role. It is essential to ensure compliance with safety regulations, technical standards, and best practices in all activities related to instrumentation and control systems. If you meet the requirements and are interested in this position, please submit your resume and cover letter showcasing your experience to hrdept@cstech.ai.,

As a highly motivated PED Attribute Lead, you will be responsible for defining and delivering vehicle-level attributes related to performance, fuel/energy efficiency, and driveability. Your role is crucial in ensuring that the vehicle meets customer expectations and competitive benchmarks in dynamic performance and real-world usability. Your key responsibilities will include: - Defining attribute targets for vehicle performance such as acceleration and top speed, energy/fuel efficiency, and driveability including throttle response, shift quality, and NVH. - Leading cross-functional teams, including powertrain, chassis, calibration, and software, to deliver attribute performance. - Developing and executing test plans for the validation of PED attributes in simulation, lab, and real-world environments. - Benchmarking competitor vehicles and analyzing market trends to inform target setting. - Utilizing data analytics and modeling tools to predict and optimize attribute performance. - Supporting vehicle tuning and calibration activities to meet attribute goals. - Presenting attribute status updates to relevant stakeholders.,