5780 Calibration Jobs - Page 28

Role Description Role Title Quality Assurance Lab In-charge Role Purpose Managing & Testing of Fiber Optical passive products.( Reliability and FAT test) Managing & testing of FIber optical passive products as per International standards. What the role entails (Key Responsibilities) (Indicative –The role is bigger) Experience in performing Factory acceptance test of FIber optical passive products. Execute the test and / or inspection of the product based on drawing, BOM, as per International standards etc. Ned to Perform the TPI (Third party inspection) test as per customer requirements. Carry out the inspections, measurements, tests that are required to determine the conformity of the material or product manufactured as per the product qualification requirement. Ensure that Test results are timely and reliable. Maintain the equipment is with Up-to-date calibration, tested product identification, good material handling. Constant improvement or reinvestment incorporating best practices for a new systems and current system enhancements. Experience in NABL related testing would preferred. Retraining and providing support in the different areas according to the needs of the company. Products statistical test and / or inspection data to help determine and maintain product quality and reliability using Quality Control procedures. You can prepare the Product Discrepancy report. Notify your immediate superior of any deviation from the established quality standards. Train personnel from other areas in testing tasks when these are required. Performs other tasks as needed. What we are looking for in you (Skills, Knowledge, Special Attributes, Mobility) Should have to manage reliability testing in Fiber Optic Interconnecting devices. Knowledge on Fiber Optic Interconnecting devices ( Manufacturing, quality). Should have to capable of TPI ( Third party inspection). Knowledge of the use of Optic Measurement Equipment and Tools, testing instruments (IL-RL Meter, Environmental chamber, Impact test, IP test etc.) Knowledge of the use of Patch Cord inspection tools (IL/RL Meter, Visual Scope, and Interferometer etc.) Knowledge of the use of Patch Cord reliability testing tools (Bend test, tensile test, impact test, torsion test, flexure test etc.) Intimate familiarity with ISO9000/TL9000 Quality Systems with implementation or other applicable professional experience. Familiar with NABL testing or certification would preferred. Working knowledge of basic and/or advanced Quality tools such as; 7QC, FMEA, SPC, FMEA, Control Plans, Root Cause Analysis, Poke Yoke, Kaizen Lean Manufacturing etc Experience with developing/documenting procedures. Use of Quality Engineering methods in inspection. Ability to coordinate with teams across departments and/or cross functional personnel. Ability to articulate (verbally & in writing), defend and negotiate Quality expectations with internal and external customers. Ability to drive technical and cultural changes where required. Location Dadra Experience & Education Minimum Qualifications & Critical Exposure to Perform the Job at the Optimum Level 2+ Years of work experience in Quality assurance & control in fibre optical product qualification testing. Diploma/Graduation in Electronics and Telecommunication. NABL certification and knowledge is preferred.

Be the First to Apply Job Description To be among the top three global Contract Manufacturing and research organization and the most preferred supplier in the chosen space To facilitate the SBU to realize it’s vision by: Making the right quality products available at right time, in full and at a competitive price. Developing systems and processes for high performance delivery. Maximising capacity and resources utilization. Develop and upgrade capabilities to keep pace with the changing environment. Adopting best in class and Lean manufacturing practices. Responsibilities Knowledge Role description Skills, competencies and certifications required  Implementation Of GLP / GMP Requirements Technically Experienced. Calibration of various laboratory equipments Technically experienced. Action Responsibilities Skills, Competencies & Certifications Required / Preferred  Qualification of secondary reference standards Having working experience of GLP.  Standardization and preparation of volumetric solutions / reagents / indicators. Having working experience of GLP.  Review of laboratory chemicals. Having working experience of GLP. Care Responsibilities Skills, Competencies And Certifications Required / Preferred Procurement and maintenance of lab chemicals and glasswares Time Management, Planning.  Allocate works to workmen and trains them Time Management, Planning.  Maintain the record of Temperature and humidity, glasswares cleaning, glasswares calibration. Good knowledge about the subject. Qualifications Minimum Graduate / Post Graduate with chemistry background, having technical background is preferred. About 3 Years In Manufacturing Operations Job Info Job Identification 8048 Posting Date 07/23/2025, 04:52 AM Apply Before 07/24/2025, 04:52 AM Degree Level Technical Diploma/A Level Job Schedule Full time Locations Piramal Enterprises Limited, Plot # 67-70, Sector II, Dhar, Madhya Pradesh, 454775, IN

Role & responsibilities We are looking for persons who can help us in handling C & I related work loads in CHP area of Refinery Preferred candidate profile

Company Description Matria Hospital, located in Calicut and established in 2011, is a specialized birthing boutique center aimed at making childbirth a memorable experience. The center offers exceptional healthcare services for mothers and newborns, with a focus on warmth, care, and love. Spanning 60,000 square feet over six floors at Airport Road, the facility ensures high visibility from National Highway No. 17 and ample parking for cars and ambulances. Role Description This is a full-time on-site role for a Biomedical Trainee located in Kozhikode. The Biomedical Trainee will be responsible for assisting in the maintenance, calibration, and troubleshooting of biomedical equipment. Daily tasks include monitoring the functionality of medical devices, conducting routine inspections, and ensuring compliance with safety standards. The role also involves collaborating with medical staff to ensure equipment is used correctly and safely, as well as maintaining accurate records of equipment status and repairs. Qualifications Familiarity with biomedical equipment maintenance, troubleshooting, and calibration Understanding of medical device safety standards and compliance regulations Strong analytical and problem-solving skills Excellent communication and teamwork abilities Detail-oriented with strong organizational skills Bachelor’s degree in Biomedical Engineering, Electronics, or a related field Relevant certifications or training in biomedical equipment maintenance is a plus Ability to work in a fast-paced healthcare environment interested candidates can share your cv at hre@matria.in /9207800111

About Company House of Spices is a leading South Asian Food manufacturer and distributor in North America (USA & Canada) and has been delivering pure and quality products for over 50 years with 11 distribution centers throughout North America. We have our own brands and have exclusivity for distributing our partner brands in US / Canada. Our vision is to bring our culture alive through the celebration of authentic ethnic food, flavor and families. Our mission is to provide consumers easy access to all authentic ethnic food and flavors across the North American marketplace with a will to win. Visit www.hosindia.com to know more. JOB DESCRIPTION Summary/Objective: The Associate QA Executive is responsible for performing QA duties on a professional level and works closely with House of Spices Inc., QA, Purchase, Supply Chain and staff in supporting designated geographic regions. Essential Functions Performs and accurately records quality checks on product and regulatory checks as specified within company programs and USFDA regulations. Responsible for compilation and maintenance of inspection reports and records. Perform product sampling and inspection, following standard methods and procedures (incorporating or developing new procedures as needed). Perform sensory evaluation as and when required following standard methods& procedures. Record, Manage and handle samples in lab as per requirement. Assist FSQA Manager/Executive to monitor processes and analyze data to enable continuous improvement and minimize food safety risk. Assist FSQA Managers/Executive in developing, implementing, auditing, and maintaining all elements of the documented Food Safety and Quality System and are effectively implemented by our suppliers. Preferable candidate- Spices, Commodities (Flour, Rice, Dals), Frozen RTE, Frozen Vegetables, RTE Snacks. Perform Sensory evaluation and reporting Perform routine and non-routine analysis of samples (raw materials, intermediates, and finished products). Operate and maintain lab instruments (Oven, Refractometer, pH meter, Salt tester) Maintain proper records of test results and ensure traceability. Assist in method development and validation. Conduct moisture, ash content, oil content, FFA & PV, pH, Brix, Acidity and other relevant tests as per specifications or ASTA/IS standards. Ensure all analysis is performed as per internal SOPs and regulatory standards (FSSAI, USFDA, etc.). Prepare and standardize reagents and chemical solutions. Follow good laboratory practices (GLP), hygiene, and safety protocols. Calibrate lab instruments and maintain calibration records. Travel Occasional travel may be required for this job profile. Required Education and Experience A bachelor’s degree in food science/food technology or equivalent qualification. Knowledge of lab technique of analyzing different food product. Good in MS word ,excel, and power point. Good organoleptic senses for product and sensory evaluation. Preferred Education and Experience Knowledge of lab technique and prior training in fundamental quality assurance technology. Basic Knowledge of Quality Assurance; GFSI and Regulatory (US FDA); FSMA and other Regulatory standards. Good Technical skills. Good communication skills. Aptitude in problem-solving. Working with start-up environment. Competencies Teamwork. Communication. Consultation. Ethical Practice. Problem Solving Relationship Management.

Job description: Job Description Role Purpose The purpose of this role is to conduct audits to ensure quality compliance within the account. ͏ Do Conduct process quality audits as per plan Conduct various process audits (1 audit/ agent/ week) as per procedure and guidelines For agents identified in the bottom quartile of performance, conduct 3 audits/ agent/ week Prepare findings from the report and share it with the client and the account leadership on daily/ weekly/ monthly, as required Conduct weekly analysis to identify the error trends and for top 2 errors, conduct root cause analysis (RCA) Conduct calibration communication to communicate any changes from the client and conduct refresher trainings to bridge any skill gap due to these changes. ͏ Deliver No.Performance ParameterMeasure1.AuditAdherence to the calendar; audit targets Compliance % as per audit reports – zero misses2.Process ComplianceCase targets – 2 hours/ week logged to be updated with the process ͏ ͏ Mandatory Skills: Quality . Reinvent your world. We are building a modern Wipro. We are an end-to-end digital transformation partner with the boldest ambitions. To realize them, we need people inspired by reinvention. Of yourself, your career, and your skills. We want to see the constant evolution of our business and our industry. It has always been in our DNA - as the world around us changes, so do we. Join a business powered by purpose and a place that empowers you to design your own reinvention. Come to Wipro. Realize your ambitions. Applications from people with disabilities are explicitly welcome.

We are looking for a detail-oriented Quality Analyst with 23 years of experience in call monitoring, quality evaluation, and performance improvement Roles and Responsibilities : Conduct phone call assessments for language, product and process for the sales agents Conduct one on one and documented feedback sessions with the sales agents Create action plans for sales agents based on the assessments Conduct training classes on the process to ensure sales agents follow the company requirements while on a call Prior experience in conducting RCAs for customer escalations Coordinate and conduct meetings with the Quality team Conduct training for the Quality team to ensure the team is on the same page Conduct calibrations for the Quality team to ensure minimal variation in Quality scores Projects handled as part of the Quality Team Process Work flow and Quality Check Manual Charted out the workflow to define each step of the process and created quality checks to ensure accurate documentation of the sales agents Call Scripts Created call scripts for sales agents based on the best practise methods to ensure the information provided to the customers are accurate and per the company standards Quality Form Design Created the quality form to capture the assessments of the Quality analysts Customer Satisfaction Improvement Increased RCAs on DSAT rated services to narrow down the areas that required improvement from the sales agents Insights shared with the training teams to ensure all agents are aware and updated on the requirements to avoid unhappy customers Interdepartmental Calibrations Coordinate and schedule product and process calibrations with the Sales and Quality Teams Calibration reports were used to ensure all teams were on equal understanding about the product and the process Why is this a great opportunity for the right candidate : Experienced founding team Great set of peers to work with Right to win The founding team knows the business & its secrets inside out We are starting with a significant head start and a precise plan of action Barriers to entry This is a specialized play with natural barriers to entry, allowing for significant value creation for all equity holders Backed by marquee global investors Exposure to all aspects of company building exposure to investors, fund-raising, decision making, building the team & culture All of the above perks of joining a high potential company very early, along with a competitive market salary Everyone at Leap is entrepreneurial, moves fast and operates with extreme ownership There is minimal management and extreme autonomy If the above defines you, you will fit in snugly What is Leap Leap is a global student mobility platform that empowers studentsaspirations for a global career and education We have built this and this and this We work at the exciting intersection of fintech & edtech And we love that we succeed as a business while powering the dreams of talented students! How far along are we We are the leaders in our space by a mile! We are backed by Sequoia, Jungle Ventures, Owl Ventures & Harvard! Read the latest fundraise news here Who are we as people We have a lean, rockstar team We have come this far with a lean team because we love to increase the talent density with every new member we add Yes, we are more picky than the usual company We hire slowly and deliberately What will you be doing We are now building our leadership team and would love to engage This is a great time to join the rocketship and participate in the upside - Broadly, You will have tearing-your-hair level complex & challenging problems to solve With massive upside if you solve them In a super fast paced environment that will challenge you With enough resources to be audacious And mentorship from an experienced founding team

Job Title: Quality Engineer QA/QC (CMM & Measurement) Location: Tokai Rika Minda India Private Limited, Dabaspete. Department: Quality Assurance / Quality Control Job Description: We are seeking a dedicated and detail-oriented Quality Engineer with strong hands-on experience in precision measurement and drawing interpretation. The ideal candidate will be responsible for maintaining high-quality standards through effective inspection and analysis techniques. Key Responsibilities: Read and interpret engineering drawings with high accuracy and understanding. Measure parts using all types of instruments including: CMM (Coordinate Measuring Machine) VMM (Vision Measuring Machine) Surface Roughness Testers Form Tracers Apply expert knowledge of GD&T (Geometric Dimensioning & Tolerancing) parameters for inspection and documentation. Perform CMM Programming (Mitutoyo CMM experience will be an added advantage). Conduct and understand the basics of Calibration processes and instrument control. Understand and apply GRR (Gage Repeatability & Reproducibility) studies to validate measurement systems. Utilize Statistical Process Control (SPC) methods for continuous monitoring and improvement of production quality. Prepare inspection reports, maintain records, and ensure compliance with company quality standards. Required Skills & Qualifications: Diploma / BE / B.Tech in Mechanical / Industrial / Production Engineering or relevant discipline. 25 years of experience in quality inspection and measurement. Hands-on experience with Mitutoyo or equivalent CMM systems. Sound knowledge in GD&T, SPC, and MSA tools. Familiarity with IATF16949 and ISO standards will be preferred. Strong analytical and problem-solving skills. Preferred Candidate: From an Automotive / Auto-component / Toyota group company background. Proactive attitude and ability to work independently and in a team. Interested candidates can send resumes at manohara.is@trmn.biz

About CCS CCS Technologies has decades of experience delivering technology driven solutions for their customers. Based out of Kerala, India and with offices in the US and Middle East, we are on a growth path like never before. Working alongside a close-knit team with tremendous exposure to various technologies, this is a place where you will have plenty of opportunities to learn, contribute, and grow! What you can expect from the job Requirement Gathering and Analysis: Work with business stakeholders to understand their production planning and quality management needs.Translate business requirements into functional specifications for SAP PP and QM modules. Configuration and Customization: Configure and customize the SAP PP (Production Planning) and QM (Quality Management) modules to meet business requirements.Set up master data, including material masters, BOMs (Bill of Materials), work centers, and routing. Implementation and Integration: Lead the implementation of SAP PP and QM modules, ensuring seamless integration with other SAP modules like MM (Materials Management) and SD (Sales and Distribution). Coordinate with technical teams for any necessary enhancements or custom developments. Testing and Validation: Develop and execute test plans to ensure the configured system meets business requirements. Conduct unit testing, integration testing, and user acceptance testing (UAT). Training and Support: Provide training to end-users on SAP PP and QM functionalities and best practices. Offer ongoing support and troubleshooting for any issues related to the PP and QM modules. Documentation: Create and maintain comprehensive documentation for configurations, processes, and user guides. Ensure all changes and updates are well-documented for future reference. Process Improvement: Continuously evaluate and improve production planning and quality management processes. Recommend and implement best practices to enhance efficiency and compliance. Collaboration: Work closely with other SAP module consultants and IT teams to ensure seamless integration and functionality across the SAP landscape. Collaborate with business users to gather feedback and make necessary adjustments. What will help you do the job well Must-have skills/ characteristics Minimum 5 years of relevant experience in SAP PP/ QM and well-versed in S4 HANA/ ECC with good analytical skills along with domain experience in manufacturing industry. Experience in Implementation and Support Projects. Have strong configuration and testing skills in the areas of SAP Forecasting, Demand Management, Production Planning (MRP) and Shop Floor Execution. Working knowledge of Material Requirement Planning. Having enough expertise in Planned Order Processing. Production Order Processing in Discrete and Repetitive Manufacturing Environment (REM). Quality Management – Quality in Procurement, Quality in Production, In-process inspection, QM Notifications, Calibration and Quality in Sales, QM Notification processing. Master Data – Bill of materials, Work centers/ Resources, Routings/ Recipe, Production versions, Inspection Plan, Master inspection, Characteristics, Catalogues and Code groups. Material Requirement Planning – Configuration and Integration with, Procurement, Sales and Distribution, New strategy definition. Production Order Execution – Order confirmation, Goods issue, Goods receipt and Back flushing. Should have experience in writing Functional Specification, co-ordination with ABAP team, testing of new functionalities. Must have experience in SAP PP-QM integration with third party tool. Must have at least 2 full life cycle implementations experience of SAP PP/PP-PI Modules. Experience in mapping all the Production processes like MTS, MTO, ATO, Repetitive and CTO in SAP. Should have hands-on experience in proposing, building, and implementing custom solutions in Fiori and S4 Systems. Cross Functional knowledge in other logistics modules Finance & Controlling, Sales & Distribution, and Procurement processes is required. Other desirable skills/characteristics SAP PPDS Experience will be added advantage. S/4 Hana Implementation. Bachelor s degree Or Preferably Engineering. Minimum two e2e Implementation Project along with experience in Support / Roll out / Upgrade Projects. 5-7 Yrs. of Relevant experience. Willingness to travel international/domestic. Knowledge of ISMS Principles and best practices. Thank you for your interest with CCS. We hope you find a meaningful career! Please send your profiles to careers@ccs-technologies.com We will – Trust, Recognize, Care You will – Learn, Contribute, Grow Job Types: Full-time, Permanent Pay: ₹700,000.00 - ₹1,600,000.00 per year Benefits: Cell phone reimbursement Health insurance Schedule: Day shift Morning shift Supplemental Pay: Performance bonus Quarterly bonus Work Location: In person

Hiring for Instrumentation Location - Raikot, Punjab Industry - Pharma Qualification - ITI or dipoma for same background interested one share resume on meenakshikandpal@tdsjobs.com 9815675900

Quality Control (QC) Roles and Responsibilities 1. Inspection and Testing Inspect raw materials, in-process components, and final products. Perform routine tests to ensure products meet specifications. Use instruments like calipers, micrometers, spectrometers, etc., as needed. 2. Documentation and Reporting Maintain detailed records of inspections, test results, and deviations. Document and report non-conformities or quality issues. Generate inspection reports, certificates of analysis (COA), and quality logs. 3. Compliance and Standards Ensure products comply with company standards, regulatory requirements (e.g., ISO, GMP, FDA), and customer specifications. Participate in audits and quality reviews. 4. Root Cause Analysis Investigate the root cause of defects or process deviations. Assist in implementing corrective and preventive actions (CAPA). 5. Process Monitoring Monitor production processes to ensure consistency and repeatability. Work closely with production teams to minimize defects and rework. 6. Calibration and Equipment Maintenance Ensure measuring and testing equipment is calibrated and maintained. Keep records of equipment calibration schedules and certificates. 7. Training and Guidance Train production staff on quality standards and inspection procedures. Promote awareness of quality requirements across departments. 8. Continuous Improvement Suggest process improvements to enhance product quality. Participate in Six Sigma, Lean, or Kaizen initiatives where applicable. 9. Safety and Hygiene Ensure QC operations are carried out safely and hygienically (especially in pharma/food industries). Report unsafe practices or equipment malfunctions. 10. Sample Collection and Handling Collect and label samples for lab testing. Ensure proper storage, handling, and transport of test specimens. Job Types: Full-time, Permanent Pay: ₹40,000.00 - ₹70,000.00 per month Benefits: Food provided Paid sick time Paid time off Provident Fund Schedule: Day shift Work Location: In person

Baddi, India Function QUALITY CONTROL Job posted on 1 Day Ago Job Description Compilation and Review of all types of data of the products analyzed at each stage (RM, PM, FG, Stability and GLP documents). Responsible for Review of Calibration and Audit Trials Verification. Responsible for assuring all Laboratory activity are carried out in compliance with existing SOP. Responsible for Integration of HPLC and GC data and new Method Creation. Verification of chemicals, volumetric solutions and reagents in LIMS. Preparation of LIMS protocols for testing of RM,PM and FG Testing and release.

We are seeking a skilled and creative Printer cum Graphic Designer to manage both the design and printing of marketing materials, signage, hoardings, banners, brochures, and other print media. The ideal candidate should have strong design sense, experience in print production, and hands-on knowledge of printing machinery and software. Key Responsibilities : Design visual content (banners, posters, hoardings, visiting cards, etc.) as per client/company requirements. Operate and maintain printing machines (offset, digital, large format printers). Prepare artwork for print (file setup, color calibration, print-ready formats). Coordinate with the marketing/sales team for design and print deliverables. Ensure print quality, color accuracy, and timely completion of print jobs. Manage basic troubleshooting and maintenance of printers. Maintain inventory of printing materials (paper, ink, laminates, etc.). Follow brand guidelines and meet deadlines for all design projects. Requirements : Proven experience as a graphic designer and printer operator. Proficiency in Adobe Illustrator, Photoshop, InDesign, etc. Familiarity with printing processes: offset, digital, flex, vinyl. Attention to detail, creativity, and time management. Ability to work under pressure and manage multiple tasks. Basic knowledge of machine maintenance is a plus. Job Type: Full-time Pay: ₹15,000.00 - ₹25,000.00 per month Benefits: Health insurance Schedule: Day shift Experience: Graphic design: 2 years (Preferred) Print advertising: 1 year (Preferred) Work Location: In person

Job Title: Digital/Flex printing press operator Company: Classic colors and Interiors Location: Kochi Job Type: Full-Time Experience Level: Mid-Level Salary 25k to 30K About Us: Classic Colors and Interiors is a dynamic and growing company .We are looking for Digital/Flex print operator for setting up, operating, and maintaining digital printing equipment to produce high-quality printed materials Key Responsibilities: Set up and operate digital printing machines Prepare and load print files and materials, ensuring proper formatting and alignment. Monitor print jobs to ensure quality standards and consistency are met. Perform routine maintenance, cleaning, and calibration of printing equipment. Troubleshoot and resolve minor equipment issues or escalate to service technicians when needed. Maintain accurate production records and logs. Qualifications: High school diploma or equivalent; technical training in printing 1+ years of experience operating digital printing equipment. Basic computer skills and experience with PDF workflows. Job Type: Full-time Pay: ₹25,000.00 - ₹30,000.00 per month Benefits: Health insurance Provident Fund Work Location: In person

Job Title: Quality Control Executive / Sr. Executive (Male Candidates Only) Department: Quality Control (QC) Location: [Specify location if needed] Experience: 3 – 8 Years (Formulations – Pharmaceutical Industry) Qualification: B.Sc / M.Sc in Chemistry Salary: As per industry standards, based on current CTC and experience Job Description: We are seeking a male QC professional with a strong academic background in Chemistry and 3–8 years of hands-on experience in Quality Control within a pharmaceutical formulations manufacturing environment . Key Responsibilities: Conduct analysis of raw materials, in-process samples, finished products, and stability samples. Perform analytical tests using HPLC, UV, FTIR, Dissolution, GC, and other instruments as per specifications and SOPs. Prepare and review analytical reports, COAs, and ensure timely documentation. Ensure compliance with cGMP, GLP, and regulatory requirements. Support method validation and transfer activities. Maintain laboratory records, equipment calibration, and sample management. Participate in investigations of OOS/OOT results and deviations. Handle audit queries and support in regulatory inspections (USFDA, MHRA, etc.). Requirements: Only male candidates are eligible for this position. Must have experience in formulations (oral solid dosage or other) in a regulated environment. Sound knowledge of regulatory guidelines and documentation practices . Proficiency in operating analytical instruments. Strong communication, teamwork, and analytical skills. Willing to work in shifts if required. Interested can call/ WhatsApp: 7396423749., Job Types: Full-time, Permanent Pay: ₹15,000.00 - ₹60,000.00 per month Benefits: Health insurance Provident Fund Work Location: In person

About this role: Wells Fargo is seeking a... In this role, you will: Provide support and scoring guidance quality assurance staff by answering questions on regulations or compliance, procedures, policies and First Call Resolution Escalate key maintenance errors identified during scoring process and ensure resolution of same, reviewing programs, processes, documentation, to ensure compliance with internal company requirements or government regulations Review systems to ensure company standards are met, exceptions are notated, and issues escalated as necessary Assist in development and design of product specific databases Review and score work Prepare calibration score and facilitate calibrations across the team to ensure consistency of quality scores delivered to clients Monitor quality assurance programs and processes to identify gaps and risk assessment Design and conduct training for as needed Provide coaching to staff and track performance expectations and results Make final scoring decisions on disputes which impact quality results Interact with staff and business partners to promote team work and departmental effectiveness Required Qualifications: 4+ years of Quality Assurance experience, or equivalent demonstrated through one or a combination of the following: work experience, training, military experience, education Required Qualifications for Europe, Middle East & Africa only: Experience in Quality Assurance, or equivalent demonstrated through one or a combination of the following: work experience, training, military experience, education Posting End Date: 28 Jul 2025 *Job posting may come down early due to volume of applicants. We Value Equal Opportunity Wells Fargo is an equal opportunity employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, status as a protected veteran, or any other legally protected characteristic. Employees support our focus on building strong customer relationships balanced with a strong risk mitigating and compliance-driven culture which firmly establishes those disciplines as critical to the success of our customers and company. They are accountable for execution of all applicable risk programs (Credit, Market, Financial Crimes, Operational, Regulatory Compliance), which includes effectively following and adhering to applicable Wells Fargo policies and procedures, appropriately fulfilling risk and compliance obligations, timely and effective escalation and remediation of issues, and making sound risk decisions. There is emphasis on proactive monitoring, governance, risk identification and escalation, as well as making sound risk decisions commensurate with the business unit's risk appetite and all risk and compliance program requirements. Candidates applying to job openings posted in Canada: Applications for employment are encouraged from all qualified candidates, including women, persons with disabilities, aboriginal peoples and visible minorities. Accommodation for applicants with disabilities is available upon request in connection with the recruitment process. Applicants with Disabilities To request a medical accommodation during the application or interview process, visit Disability Inclusion at Wells Fargo . Drug and Alcohol Policy Wells Fargo maintains a drug free workplace. Please see our Drug and Alcohol Policy to learn more. Wells Fargo Recruitment and Hiring Requirements: a. Third-Party recordings are prohibited unless authorized by Wells Fargo. b. Wells Fargo requires you to directly represent your own experiences during the recruiting and hiring process.

About IntouchCX IntouchCX is a global leader in customer experience management, digital engagement, and AI and automation solutions. We immerse ourselves in your world with curiosity, creativity, and innovation to deliver exceptional results. For over 20 years, we have scaled with soul to become a disruptive industry leader by building trusted long-term relationships with our brand partners and empowering our people to drive positive change. About the Job The Product Trainer is responsible for delivering process training content to the new hires using different learning platforms to increase learners' engagement, knowledge, skills, and efficiency. As Product Trainer, You Will… Training/Abay Management: Define any barriers and execute batches in line with the given metrics and deadlines Maintain a repository of recommended answers Assist in creating training material Prepare worksheets and other job aids for associates' reference Coach trainees and agents in language and sales techniques and strategies Create content for stakeholders/clients Conduct training sessions for associates Conduct Sale driver analysis from a Sales and soft skills perspective Analyze knowledge gaps with SMEs and QAs Review and improve training content. Create and implement client and internal reporting systems, as well as procedures for day-to-day operations and performance monitoring Support production associates on a real-time basis Collate chats for future reference Perform a monthly Training Needs Analysis (TNA) to pinpoint issues and fill in any gaps Conduct tests/assessments before and after the training interventions Participate in calibration meetings (internal and external) Develop action plans for the bottom quartile and ensure that they move up the learning curve by means of special coaching/ conducting refresher training Broadcast the updates to the floor Conduct small group training sessions Conduct chat readout sessions for the associates Recommend corrective and refresher courses to be assigned based on associates’ performance on the floor Participate in weekly business reviews and provide input as asked for Roll out knowledge checks once a month Communicate with clients via emails and conference calls on a daily or weekly basis to review and address training concerns and introduce new policies and procedures As Product Trainer, You Have… Minimum Educational Requirement – High School graduate Minimum of one year's worth of process training experience or equivalent teaching/coaching experience Experience in the markets, customer service, and sales Exceptional time management, organizational, and prioritization skills to complete work promptly Expert-level communication skills Experience in graphic design, content writing or editing, or a related field in a different industry, as an advantage. Proficiency with Microsoft Office and Google Suite (Sheets, Slides, Docs, and Drive) is necessary. Proven analytical abilities to assess performance and pinpoint areas that need improvement in order to meet project requirements The ability to successfully work across cross-functional teams A positive work ethic and commitment to achieve the best possible outcomes The passion to be a role model that exemplifies our 10 Things (cultural values) Ability to assess the “big picture” and draw connections between inputs and outputs leadership qualities such as critical thinking and problem-solving to aid in overcoming difficult situations A keen eye for detail, the ability to multitask, and strong analytical skills

Job Description: Role : Executive Microbiologist Location : Hyderabad Job Purpose/Overview To ensure the Dry Pet Food products leaving the factory operation confirms to the MARS specifications through the assurance of raw materials quality & compliance to process parameters by demonstrating quality inspections, process monitoring & control through microbiological testing of samples. The Microbiologist shall assist the Quality control lab manager in managing the Laboratory (microbiology) in terms of executing test plans in timely manner, follow GLP, & cost optimization. Shall participate & support effectively in design & implementation of Food Safety Quality Management Systems (HACCP) and essential Pre-requisite programs (PRPs) for Dry Pet food plant. Job Responsibilities 1. Plant Responsibilities: o Conduct analysis of incoming raw materials, Finished products as per Microbiological test plan. o Conduct routine microbiological tests as per the Mars Micro verification standard. o Communicate the status of materials or products for release/hold/ rework/ reject o Ensure effective implementation of personal-plant hygiene, cleaning & sanitations programs in line with GMP standard o Ensure Calibration the laboratory testing & measuring equipment’s as per calibration plan o Conduct microbiological analysis for intermediate products & finished products as per test plan o Learn & implement new testing methods, as required. o Track & report the microbiological performance using ‘trend charts’, suggest & follow up corrective & preventive actions o Maintain Lab testing data and relevant test records. Ensure timely completion of all testing and documentation. o Conduct Environmental Monitoring of plant by taking Swabs samples, Air Monitoring and water testing. 2. Suppliers Interface: ➢ Track supplier performance basis raw materials quality, microbiological contaminations, handle non-conformities & record ➢ Communicate materials/ suppliers related issues to Supply chain and follow up ➢ Conduct/ Co-ordinate analysis of Shelf life samples, Market samples & Concerned samples to track product performance and feedback ➢ Co-ordinate/ facilitate with external testing laboratories for analysis & records 3. Support Quality & Food Safety Systems: ➢ Support effective implementation of HACCP in the plant by ensuring cleaning sanitation. ➢ Assist in designing MRAs for raw materials by sharing the analysis outcomes. ➢ Support in CCP/OPRP verifications wherever applicable through Microbiological Samples collections, Testing and reports sharing. ➢ Support in GMP verifications at site. 4. Other Responsibilities: ➢ Demonstrate GLP & support Lab cost optimization initiatives ➢ Conduct Associate on-job and classroom training on Food Safety Management. Focus on personal-plant hygiene, cleaning & sanitation plans. ➢ Quality- “Associate is responsible to ensure effective implementation of Mars QMP (Quality Management Process), Quality and Food Safety requirements including Personnel Hygiene and GMP stated by the Organization as applicable. Associate shall deliver through Respective Area/Process Standard Operating Procedures. Meet basic competency requirements mentioned in the job Role Skill Matrix to ensure Quality and Food Safety requirements are implemented to satisfactory level.” ➢ SES-Overall responsibility to ensure the individual compliance to Mars Global/Asset conservation standards and other relevant local SES legislation. Responsible for implementing and maintaining all relevant SES Management systems in their respective work area. Responsible for understand risks and controls in their area, get appropriate training, report all incidents and ensure that SES objectives are captured as KRA's in TMS ➢ The incumbent would work collaboratively with other Executives Microbiology for supporting the deliverables of the Lab ➢ He/She would act along with other Executives Microbiology as interface to Suppliers related to Microbiology testing Media procurement, PCR vendors and External microbiology labs. Job Specifications/Qualifications 1. Educational & Professional Qualification MSc- Microbiology or B. Tech with Microbiology Knowledge/Experience ➢ 3-4 years’ experience in microbiology Lab ➢ Required experience with Food/ Pharma Company

Job Title : Engineer Department : Quality Reports To : Quality Head Location : Gurgaon Experience - Must have 3-4 years of experience in Moulding Company Job Responsibilities : Developed and maintained the Quality Management System of the organization with respect to the ISO 9000 family, ensuring its implementation within various departments and locations. Led Quality Management System documentation processes, including the master document control list, and lead the review, approval, distribution, and training of new or updated procedures. Overall responsible for inward inspection, in process inspection, and Pre Dispatch Inspection.Preparation of Incoming inspection, inprocess inspection and final inspection report. Assisted Quality Manager with supervising and training needs of quality staff as needed, mentoring personnel to enhance development and growth. Investigate and analyze the root cause of quality issues, defects and deviations. Collaborate with cross-functional teams to develop Corrective and Preventive Actions (CAPA). Prepare Daily Quality Report that includes incoming quality control data, outgoing quality control data, daily defects and customer complaints. Maintain accuarte records of quality data, inspection reports, and testing results. Prepare quality reports and present findings to management and customers as needed. Implement and maintain quality control processes and standards.Prepare and update the Work Instructions, Quality Manual and SOP. Provide training and guidance to production personnel on quality standards, processes and procedures for continual improvement. Prepare and update master file of drawing for various products and tools. Good knowledge of Powder Metallurgy and Microstructure analysis. Knowledge of FMEA , Control Plan, Kaizen, Why-Why Analysis, Packing standard, SPC. Application of 7 QC Tools, PPAP, SPC and Red Bin Analysis. Responsible for reducing inhouse rejection PPM and rework PPM. Calibration of all the euipments and devices used in plant like Vernier Caliper, Micrometer,Dial Indicator,Weighing Balance,Standard Weight,Pressure Gauges and maintaining master list of equipments. Good Knowledge of 3D AutoCAD.Maintain 5S in Quality Lab. SAP basic knowledge Good Knowledge of Vicker Hardness Tester, Microscope, Rockwell Hardness Tester, Conductivity Meter, Sample Mould Making,Density Tester, Universal Tensile Machine, Vision Measurement System (Rapid-I), Stereoscope. Job Type: Full-time Pay: ₹20,000.00 - ₹30,000.00 per month Application Question(s): What is your current CTC? What is your expected CTC? What is your notice Period? Do you have experience in Injection Moulding? Work Location: In person

Your challenges Attending Pipettes Maintenance & its Repair. Calibration of pipettes as per ISO 8655. Knowledge about ISO 17025 standards. Sending quotations to customers for required spares/Service/AMC for Pipettes through e365. Achieving the Service business target for Pipette calibration (Service/AMC). Achieving assigned Goals. Working closely with customer for on time payment collection. Management of complaints related to pipettes for the assigned territory. Customer Communication through E-mail / Letter. Customer Presentations about Eppendorf Service Capabilities, as and when needed. Working with the sales & service manager of the Branch. Updating the market feedback to the management. Daily CRM update (E365). Your expertise Minimum 1 to 2 year’s industry related Calibration experience. Key understanding to handle customer complaints and workflows. Excellent verbal and written communication skills. Professional experience in MS office tools is desired. Bachelor's degree in B.Tech / Diploma (Electrical or Electronics Engineering or equivalent). Your benefits at Eppendorf We truly appreciate our employees and their performance We offer a wide range of learning and development opportunities to allow you to deepen your technical knowledge and for continuous growth By working with us, you will make a meaningful contribution to improving human living conditions Attractive salary, employee benefits and performance bonus. Eppendorf is an equal opportunity employer. We offer all qualified employees and applicants identical chances.

Department: Quality Assurance Reports To: Quality Manager Employment Type: Full-Time Position Summary: We are seeking a detail-oriented and experienced Quality Inspector to ensure that all sheet metal fabricated parts and assemblies meet the required standards of quality, precision, and compliance. The ideal candidate will have a strong background in sheet metal fabrication , a solid understanding of engineering drawings , and hands-on experience with inspection tools and techniques . Key Responsibilities: Inspection & Quality Control Conduct in-process, first article, and final inspections of sheet metal components and assemblies. Verify dimensions, tolerances, and finishes using tools such as calipers, micrometers, height gauges, surface plates, CMMs , and other precision instruments. Ensure parts conform to engineering drawings, technical specifications , and customer requirements. Identify non-conformities and initiate NCRs (Non-Conformance Reports) with appropriate root cause details. Documentation & Reporting Maintain accurate inspection records, including inspection checklists, reports, and quality logs . Document findings and communicate defects clearly to production and engineering teams. Process & Compliance Monitor production processes to ensure adherence to ISO 9001 / AS9100 / customer-specific standards . Recommend and help implement corrective/preventive actions to improve quality and reduce defects. Support calibration control of inspection equipment and tools. Collaboration & Communication Work closely with the production team to resolve quality-related issues in real time. Assist with internal and external audits, and interact with customer quality representatives when required. Participate in quality meetings and provide feedback for continuous improvement. Required Skills & Qualifications: Minimum 2–5 years of experience as a Quality Inspector in a sheet metal or precision fabrication environment . Strong understanding of GD&T (Geometric Dimensioning & Tolerancing) and the ability to read technical drawings/blueprints . Proficient in using inspection tools such as vernier calipers, micrometers, CMM, thread gauges, surface plates , etc. Familiar with ISO 9001 / AS9100 / TS16949 standards (as applicable). Good knowledge of MS Office and quality documentation practices. Attention to detail, analytical mindset, and strong problem-solving skills. Preferred Qualifications: Certification in Quality Control / Mechanical Inspection Experience with sheet metal processes such as laser cutting, bending, welding, punching, and finishing . Familiarity with ERP or MES systems for quality data entry. Job Types: Full-time, Permanent Pay: ₹14,000.00 - ₹20,000.00 per month Benefits: Paid sick time Provident Fund Work Location: In person

Job Role: Quality Management System (QMS) Manager Department: Quality Assurance Reports To: Plant Head / QA Head Location: Ahmedabad, Gujarat Industry: FIBC Manufacturing / Bulk Packaging Job Summary: The QMS Manager is responsible for planning, implementing, and maintaining the Quality Management System to meet ISO 9001 and industry-specific standards (such as FSSC 22000, ISO 22000, BRC, or HACCP, if applicable). The role ensures consistent product quality in compliance with customer requirements and regulatory standards, while also driving continuous improvement across FIBC manufacturing operations. Key Responsibilities: Develop and maintain the company’s QMS in alignment with ISO 9001 and customer-specific requirements for FIBC products. Ensure compliance with food-grade packaging standards, including hygiene, traceability, and contamination control protocols. Lead internal audits and coordinate third-party and customer audits (e.g., BRC, ISO, HACCP). Manage quality documentation: SOPs, work instructions, inspection checklists, and QMS manuals. Monitor production quality parameters including fabric strength, UV stability, GSM, stitching quality, and loop safety factor. Investigate non-conformities, implement root cause analysis (RCA), and define corrective and preventive actions (CAPA). Coordinate training for production and QA staff on quality standards, inspection protocols, and QMS compliance. Liaise with customers on quality-related queries, complaints, and technical documentation. Ensure calibration and maintenance of quality control instruments (tensile testers, UV chambers, GSM cutters, etc.). Support supplier quality assessments for raw materials like PP granules, masterbatches, liners, and webbing. Drive continual improvement using quality tools (Pareto, 5 Whys, Fishbone, etc.) and Lean principles. Key Skills & Competencies: In-depth understanding of QMS standards (ISO 9001, BRC, FSSC 22000, ISO 22000, HACCP). Strong knowledge of FIBC product standards: UN-certified bags, food-grade bags, baffle bags, etc. Hands-on experience with quality testing methods for woven polypropylene bags and raw materials. Proficiency in documentation control, audit management, and customer complaint handling. Excellent communication and leadership skills to work with cross-functional teams. Familiarity with ERP or QMS software for document and record management. Qualifications: Bachelor’s / Master degree in Polymer Engineering, Mechanical Engineering, Industrial Engineering, or related discipline. Minimum 5–10 years of experience in quality management within the packaging or FIBC industry. Certifications such as Lead Auditor (ISO 9001/22000), Six Sigma (Green/Black Belt) are desirable. Preferred Experience: Working with international clients in food, pharma, or chemical packaging sectors. Experience implementing and maintaining hygiene standards for cleanroom or food-grade FIBC production. Interested Candidates kindly drop your resume on email - hohr@champalalgroup.com Job Types: Full-time, Permanent Ability to commute/relocate: Ahmedabad, Gujarat: Reliably commute or planning to relocate before starting work (Preferred) Application Question(s): Current Salary ? Expected Salary ? Notice Period ? Reason for Change ? Education: Bachelor's (Preferred) Experience: QMS: 5 years (Preferred) Willingness to travel: 50% (Preferred)

Job Title : Plant Head – Nano Products (CT, PT & Core Transformers) Location : Vadodara Reports to : Managing Director Job Summary : The Plant Head will be responsible for overseeing the entire manufacturing operations of a facility producing nano and medium-voltage instrument transformers, such as CTs, PTs, and transformer cores. The role includes managing production, quality, maintenance, supply chain, and engineering functions to ensure timely delivery, cost control, and adherence to quality standards. This leadership position requires strong technical expertise in CT/PT/core production and proven experience managing end-to-end plant operations. Key Responsibilities :1. Overall Plant Operations Lead the manufacturing unit producing LV/MV/HV Current Transformers (CTs), Potential Transformers (PTs), and magnetic cores. Ensure achievement of daily, monthly, and annual production and dispatch targets. Coordinate with cross-functional teams (Production, QC, Design, Planning, SCM, Maintenance). 2. Production Management Oversee CT/PT manufacturing processes, including winding, core assembly, epoxy/resin casting, vacuum drying, testing, and calibration. Optimize workflows to reduce cycle time, increase throughput, and minimize waste. Drive lean manufacturing, 5S, and TPM initiatives across the shop floor. 3. Quality & Testing Ensure compliance with relevant standards (e.g., IS, IEC, ANSI) for instrument transformers. Oversee testing protocols like insulation resistance (IR), ratio error, burden, partial discharge, etc. Lead root cause analysis and CAPA for internal and customer complaints. 4. Design & Engineering Coordination Work closely with R&D and Design teams for new product development (NPD) and customization. Review drawings, BOMs, and specifications for manufacturability and cost optimization. 5. Maintenance & Utilities Ensure preventive maintenance and minimal breakdown of critical equipment such as: Vacuum casting machines Resin mixing and dispensing units Coil winding machines Testing setups (automatic/manual) Oversee utility management: DG sets, compressors, HVAC (if required). 6. Supply Chain & Inventory Coordinate with SCM and procurement to ensure timely availability of raw materials like CRGO cores, resins, copper wires, bushings, and enclosures. Maintain inventory levels and reduce working capital without disrupting production. 7. Manpower & Team Leadership Lead and develop production supervisors, engineers, and floor staff. Conduct regular training on safety, SOPs, and quality procedures. Build a performance-driven and collaborative culture within the plant. 8. Safety, Compliance & Audits Ensure adherence to EHS standards, ISO 9001/14001/45001 (as applicable). Manage internal and external audits – customer, ISO, statutory. Ensure factory complies with labour, environmental, and electrical safety regulations. 9. Strategic Planning & Reporting Monitor KPIs: OEE, yield, delivery performance, quality cost, downtime. Report regularly to top management on plant performance, challenges, and opportunities. Participate in budgeting, capex planning, and long-term capacity expansion. Key Requirements : Education : B.E./B.Tech in Electrical / Mechanical / Electronics Engineering; MBA (Operations) is a plus. Experience : 8–10 years in instrument transformer manufacturing (CTs, PTs, cores), with at least 5+ years in a plant leadership role. Skills : Strong knowledge of CT/PT design, production processes, and industry standards (IS/IEC/ANSI). Excellent leadership, planning, and decision-making capabilities. Familiarity with ERP systems, shop floor digitization, and lean tools. Good understanding of testing standards and calibration protocols. Job Type: Full-time Pay: ₹800,000.00 - ₹1,000,000.00 per year Work Location: In person

Job Title : Maintenance Manager – Radiator Transformers Manufacturing Location : Vadodara Reports to : Plant Head Job Summary : The Maintenance Manager will be responsible for the upkeep, preventive maintenance, and troubleshooting of all plant machinery and utilities used in the manufacturing of radiator components for transformers. This includes mechanical, electrical, and utility systems such as welding machines, fin press machines, painting booths, compressors, and hydraulic testing setups. The role requires a hands-on leader with strong knowledge of heavy fabrication equipment maintenance. Key Responsibilities :1. Preventive & Predictive Maintenance Develop and implement preventive maintenance schedules for all critical machinery. Monitor equipment health and carry out condition-based maintenance to avoid unplanned breakdowns. Maintain proper records of maintenance activities, machine downtime, and spares usage. 2. Breakdown Management Lead the response to machine breakdowns and troubleshoot root causes. Minimize downtime through rapid problem resolution and efficient coordination with production teams. Maintain availability of essential spares and tools for quick response. 3. Machinery & Equipment Oversight Oversee the maintenance of: Radiator fin forming machines Spot welding/MIG/TIG welding sets Header pipe cutting and bending machines Hydraulic pressure testing systems Surface preparation and painting booths Overhead cranes, compressors, and forklifts Ensure equipment calibration and accuracy for quality-sensitive operations like hydro testing. 4. Utility & Facility Management Manage utilities such as air compressors, EOT cranes, lighting, and water systems. Coordinate with facility vendors for electrical, plumbing, and structural maintenance. 5. Spare Parts Management Develop inventory control for critical spares and consumables. Identify cost-effective sources for spare parts and maintenance consumables. 6. Team Leadership Supervise and train a team of fitters, electricians, welders, and maintenance technicians. Plan manpower deployment for multiple shifts and emergency needs. 7. Compliance & Safety Ensure adherence to electrical and mechanical safety regulations. Implement machine guarding, lockout/tagout (LOTO), and fire safety protocols. Maintain documentation for audits related to ISO, safety, and environmental standards. 8. Continuous Improvement Suggest and implement energy-saving and cost-reduction initiatives. Collaborate with production and quality teams to support process improvements and equipment upgrades. Key Requirements : Education : Diploma / B.E. / B.Tech in Mechanical, Electrical, or Industrial Engineering. Experience : 5–8 years in plant maintenance, with at least 5 years in a managerial or supervisory role in heavy fabrication or radiator/transformer manufacturing. Skills : Strong knowledge of hydraulic systems, welding machinery, industrial electricals, and utility maintenance. Job Type: Full-time Pay: ₹500,000.00 - ₹800,000.00 per month Work Location: In person

Description: Responsible for ensuring the accuracy and reliability of laboratory instruments through regular calibration and preventive maintenance. This role involves the daily verification of key instruments, such as balances, pH meters, and Milli-Q water systems, as well as monitoring environmental conditions like temperature. The analyst will perform chemical and instrumental analyses (including Wet Chemistry, HPLC, GC, AAS, etc.) to support R&D and production processes, ensuring product quality at various stages of development and manufacturing. Ensuring data integrity in all laboratory activities. Essential Functions: Perform the calibration and preventive maintenance of the instruments as per the respective schedules. Perform the determination of KF factor, Daily verification of Balances, pH meter, Milli-Q water system, Hygro meters, Refrigerator temperature monitoring . Perform the in-process/ intermediate/ finished products analysis by Wet/ Chromatography techniques for R&D/ Plant support. Chemical/ instrument analysis (i.e. Wet/ HPLC/ GC/ AAS/ ICP-MS, etc.) Perform the Impurity standard/ working standard/ primary reference standards To maintain cGMP and Data integrity. Additional Responsibilities: Activities other than the defined in the Job Responsibility are to be done, as per the requirement of HOD Education: Bachelors Degree (BA/BS) B. Sc - Required Bachelors Degree (BA/BS) B. Pharma - Preferred Master Degree (MS/MA) M. Sc - Preferred Master Degree (MS/MA) M. Pharma - Preferred Experience: 3 years or more in 3-8 Yrs Skills: Calibration & Preventive Maintenance - Intermediate Instrument Verification & Monitoring - Advanced In-Process & Product Analysis - Advanced Chemical & Instrumental Analysis - Advanced Standard Preparation - Intermediate cGMP & Data Integrity Compliance - Intermediate Specialized Knowledge: Licenses: Amneal is an equal opportunity employer. We do not discriminate based on caste, religion, gender, disability, or any other legally protected status. We believe in fostering a workplace that values diversity and inclusion.