6705 Simulation Jobs - Page 44

Company: Qualcomm India Private Limited Job Area: Engineering Group, Engineering Group > Hardware Engineering General Summary: As a leading technology innovator, Qualcomm pushes the boundaries of what's possible to enable next-generation experiences and drives digital transformation to help create a smarter, connected future for all. As a Qualcomm Hardware Engineer, you will plan, design, optimize, verify, and test electronic systems, bring-up yield, circuits, mechanical systems, Digital/Analog/RF/optical systems, equipment and packaging, test systems, FPGA, and/or DSP systems that launch cutting-edge, world class products. Qualcomm Hardware Engineers collaborate with cross-functional teams to develop solutions and meet performance requirements. Minimum Qualifications: Bachelor's degree in Computer Science, Electrical/Electronics Engineering, Engineering, or related field and 2+ years of Hardware Engineering or related work experience. OR Master's degree in Computer Science, Electrical/Electronics Engineering, Engineering, or related field and 1+ year of Hardware Engineering or related work experience. OR PhD in Computer Science, Electrical/Electronics Engineering, Engineering, or related field. Preferred Qualifications: Master's degree in Computer Science, Electrical/Electronics Engineering, Engineering, or related field. 3+ years of Hardware Engineering or related work experience. 2+ years of experience with circuit design (e.g., digital, analog, RF). 2+ years of experience utilizing schematic capture and circuit simulation software. 2+ years of experience with hardware design and measurement instruments such as oscilloscopes, spectrum analyzers, RF tools, etc. Principal Duties and Responsibilities: Applies Hardware knowledge and experience to plan, optimize, verify, and test electronic systems, bring-up yield, circuits, mechanical systems, Digital/Analog/RF/optical systems, equipment and packaging, test systems, FPGA, and/or DSP systems. Integrates features and functionality into hardware designs in line with proposals or roadmaps. Conducts simulations and analyses of designs as well as implements designs with the best power, performance, and area. Collaborates with teams (e.g., design, verification, validation, software and systems engineering, architecture development teams, etc.) to implement new requirements and incorporate the latest test solutions in the production program to improve the yield, test time, and quality. Evaluates, characterizes, and develops the manufacturing solutions for leading edge products in processes and bring-up product to meet customer expectations and schedules. Evaluates reliability of materials, properties, and techniques and brings innovation, automation, and optimization to maximize productivity. Assists in the assessment of complex design features to identify potential flaws, compatibility issues, and/or compliance issues. Writes detailed technical documentation for Hardware projects. Level of Responsibility: Works independently with minimal supervision. Decision-making may affect work beyond immediate work group. Requires verbal and written communication skills to convey information. May require basic negotiation, influence, tact, etc. Tasks require multiple steps which can be performed in various orders; some planning, problem-solving, and prioritization must occur to complete the tasks effectively. Applicants : Qualcomm is an equal opportunity employer. If you are an individual with a disability and need an accommodation during the application/hiring process, rest assured that Qualcomm is committed to providing an accessible process. You may e-mail disability-accomodations@qualcomm.com or call Qualcomm's toll-free number found here. Upon request, Qualcomm will provide reasonable accommodations to support individuals with disabilities to be able participate in the hiring process. Qualcomm is also committed to making our workplace accessible for individuals with disabilities. (Keep in mind that this email address is used to provide reasonable accommodations for individuals with disabilities. We will not respond here to requests for updates on applications or resume inquiries). Qualcomm expects its employees to abide by all applicable policies and procedures, including but not limited to security and other requirements regarding protection of Company confidential information and other confidential and/or proprietary information, to the extent those requirements are permissible under applicable law. To all Staffing and Recruiting Agencies : Our Careers Site is only for individuals seeking a job at Qualcomm. Staffing and recruiting agencies and individuals being represented by an agency are not authorized to use this site or to submit profiles, applications or resumes, and any such submissions will be considered unsolicited. Qualcomm does not accept unsolicited resumes or applications from agencies. Please do not forward resumes to our jobs alias, Qualcomm employees or any other company location. Qualcomm is not responsible for any fees related to unsolicited resumes/applications. If you would like more information about this role, please contact Qualcomm Careers.

Genpact (NYSE: G) is a global professional services and solutions firm delivering outcomes that shape the future. Our 125,000+ people across 30+ countries are driven by our innate curiosity, entrepreneurial agility, and desire to create lasting value for clients. Powered by our purpose - the relentless pursuit of a world that works better for people - we serve and transform leading enterprises, including the Fortune Global 500, with our deep business and industry knowledge, digital operations services, and expertise in data, technology, and AI. We are inviting applications for the role of Assistant Manager, Power BI We're looking for someone would be responsible for delivery of all analytics led projects undertaken for this top priority customer. Projects would include the following, though not limited to, since it’s an evolving role: Reporting & Dashboarding (PBI), Direct Data Source connection to PBI dashboard, Value generating Analytic Use cases involving data science and Statistical forecasting / modeling. Responsibilities In this role, you'll be responsible for all the activities related to Power BI domain Intermediate years subject matter expert on the Microsoft technology stack - Microsoft Power BI, Azure, sophisticated analytics, and information management technology In this role, the resource will be responsible for rapid simulation and understanding of existing applications and technical environment, to convert business requirements into detailed functional requirements and crafting into a functional specifications' document. And also to take responsibility and ownership of components/processes within the team. Should understand databases – MS SQL Server, Oracle, Azure, Should have exposure to SQL Performance tuning, Data modeling, SSIS, SSRS Working knowledge of Business Intelligence Systems & Tools (Microsoft Power BI, SQL Server Reporting Services, Tableau, Qlikview, Spotfire etc.) Working understanding of different data, reporting and analytics tools and how they are used within an organization Solid understanding of databases like SQL Server, SQL Azure, Oracle etc. A deep understanding of, and ability to use and explain all aspects of, relational database design, multifaceted database design, OLTP, OLAP, critical metrics, Scorecards, and Dashboards Ability to recommend architecture standard methodologies related to ETL, ELT, BI, and the life-cycle of an EDW solution Good to have MS Excel whiz skills - Power Query, Power View, Power Pivot Strong financial analytical skills and problem solving skills. Healthcare & Life Sciences industry experience a plus Qualifications we seek in you! Minimum qualifications Knowledge of standard methodologies and IT operations in an always-up, Preferred qualifications Bachelor's / Graduation / Equivalent Preferably Masters in Business Administration Genpact is an Equal Opportunity Employer and considers applicants for all positions without regard to race, color, religion or belief, sex, age, national origin, citizenship status, marital status, military/veteran status, genetic information, sexual orientation, gender identity, physical or mental disability or any other characteristic protected by applicable laws. Genpact is committed to creating a dynamic work environment that values respect and integrity, customer focus, and innovation. Get to know us at www.genpact.com and on X, Facebook, LinkedIn, and YouTube. Furthermore, please do note that Genpact does not charge fees to process job applications and applicants are not required to pay to participate in our hiring process in any other way. Examples of such scams include purchasing a 'starter kit,' paying to apply, or purchasing equipment or training. Job Assistant Manager Primary Location India-Bangalore Schedule Full-time Education Level Bachelor's / Graduation / Equivalent Job Posting Jul 7, 2025, 2:02:04 AM Unposting Date Ongoing Master Skills List Operations Job Category Full Time

We are seeking a qualified weather modeling expert proficient in running atmospheric and oceanic simulation codes such as MOM, WRF, and other relevant applications (final list to be confirmed, potentially totaling 5–6 models). The selected individual will be responsible for conducting benchmarking tests essential for the submission of an upcoming Request for Proposal (RFP). Additionally, post-award support will be required to remotely assist in reproducing and validating results Job Type: Full-time Pay: ₹18,298.36 - ₹350,000.00 per month Benefits: Paid sick time Schedule: Day shift Work Location: In person Expected Start Date: 09/07/2025

Role Summary: We are looking for a motivated and dynamic fresher (MSc Microbiology, BTech Biotechnology, BTech in Medical Science, BTech in Biomedical Engineering or B.E. Computer Science) with excellent communication skills and a strong willingness to learn, to join our simulation training division. This role involves assisting doctors and trainers in managing and coordinating clinical simulation programs for training at Medline Academics and Dr. Kamini Rao Hospitals. Key Responsibilities: Assist in setting up simulation-based training sessions under the guidance of Mr. Ravi Tejas. Operate and maintain simulation equipment, mannequins, and related software/hardware tools. Coordinate with faculty and participants for scheduling and execution of training programs. Support trainers and doctors during hands-on sessions, including preparing materials and maintaining a sterile environment. Document session details, track attendance, and prepare feedback reports. Ensure upkeep and inventory of all simulation equipment and technical systems. Participate in internal training to understand clinical workflows and technical aspects of simulation. Qualifications and Experience: MSc in Life Sciences, Biotechnology, Anatomy, Physiology OR B.E. in Computer Science or related field Freshers welcome; exposure to healthcare, education technology, or simulation is a plus Skills Required: Strong English communication (verbal & written) Quick learner and able to follow instructions accurately Tech-savvy (especially for B.E. candidates) with interest in healthcare/clinical settings Team player, detail-oriented, proactive, and organized Joining: Immediate Job Types: Full-time, Permanent Pay: From ₹21,000.00 per month Schedule: Day shift Morning shift Education: Bachelor's (Required) Experience: Life Science: 1 year (Preferred) total work: 1 year (Preferred) Language: English (Required) Kannada (Required) Work Location: In person

Flex is the diversified manufacturing partner of choice that helps market-leading brands design, build and deliver innovative products that improve the world. A career at Flex offers the opportunity to make a difference and invest in your growth in a respectful, inclusive, and collaborative environment. If you are excited about a role but don't meet every bullet point, we encourage you to apply and join us to create the extraordinary. Job Summary To support our extraordinary teams who build great products and contribute to our growth, we’re looking to add a Senior Engineer - Simulation Engineering in Chennai. What a typical day looks like: Responsible for the design and development of simulation packages in order to meet customer requirements. From the design of concepts, through development into fully functional and tested simulations. Responsible to work on innovative solutions that improves the usability of the software as well as integrate the software into Flex operations worldwide. Will lead definition of new directions and functionality for the overall corporate strategy. Will provide coordination of new project activities and support for ongoing manufacturing activities / problems related to simulation. Analyzes and researches data related to operational metrics and manufacturing environments. Must have extensive expertise in Discrete Event Simulation software to deploy in production environments Will use advanced software development techniques (in application, DBA, M2M and network programming) to create connected factory systems Will use detailed Lean Manufacturing and Six Sigma techniques to perform data driven operational decision while programming into DES software environments and using IE methodology to implement into operations environments. Confers with all support team personnel to clarify or resolve problems and develop corrective action, method improvement to resolve problems and develop simulations Promote effective data management and visualization for projects within the space of Simulation and Modelling using Big Data Management Tools, and other methodologies. Provide Global SME technical support to sites on DES Simulation, ensuring compliance and improved best practice in project executions. Provide SME support to cross-functional teams in the areas of Advanced Manufacturing Technologies. Performing Virtual simulations of processes and validating the same. Complete other tasks per dept. requirements. The experience we’re looking to add to our team: Bachelor degree, major in Industrial Engineering or Engineering related ; Typically requires 4+ years of experience in engineering in the high technology electronics industry or related areas Ability to use and create simulation and industrial engineering software tools and solutions. Must have expert level industrial engineering knowledge to use to set up manufacturing processes, optimize processes and solve operational issues Can use C/C++/python program in Discrete Event Simulation software Good English ability of reading, writing, listening and speaking Good commend of DES software, familiar with Flexsim system/ visual components/plant simulation is preferred Accept business travel What you’ll receive for the great work you provide: Health Insurance PTO PM15 Job Category Production Engineering Required Skills: Optional Skills: Flex pays for all costs associated with the application, interview or offer process, a candidate will not be asked for any payment related to these costs. Flex is an Equal Opportunity Employer and employment selection decisions are based on merit, qualifications, and abilities. We do not discriminate based on: age, race, religion, color, sex, national origin, marital status, sexual orientation, gender identity, veteran status, disability, pregnancy status, or any other status protected by law. We're happy to provide reasonable accommodations to those with a disability for assistance in the application process. Please email accessibility@flex.com and we'll discuss your specific situation and next steps (NOTE: this email does not accept or consider resumes or applications. This is only for disability assistance. To be considered for a position at Flex, you must complete the application process first).

Our vision is to transform how the world uses information to enrich life for all . Micron Technology is a world leader in innovating memory and storage solutions that accelerate the transformation of information into intelligence, inspiring the world to learn, communicate and advance faster than ever. Job Description We are seeking a highly skilled and experienced System Architect, Hardware Engineer or Applications Engineer to join our dynamic team. The ideal candidate will work closely with System Level Architects to design and define block diagrams, schematics, and electrical requirements for our cutting-edge projects for memory packaging. This role requires a deep understanding of hardware design, package design and system architecture, as well as the ability to collaborate effectively with cross-functional teams. Key Responsibilities Collaborate with System Level Architects to design and define block diagrams, schematics, and electrical requirements. Develop and implement hardware solutions that meet package specifications and requirements. Conduct detailed analysis and verification of system-in-package interfaces to ensure correct performance and reliability. Work closely with firmware & product engineers to ensure seamless integration of system-in-package product solutions. Provide technical guidance and support to junior engineers and other team members. Stay current with industry trends and advancements in hardware technology to ensure our solutions remain competitive and innovative. Prepare and present technical documentation and reports to stakeholders. Qualifications Master's degree in Electrical Engineering, Computer Engineering, or a related field with 8-10 years of experience, or a PhD with 6-8 years of experience. Proven experience in hardware design and development, including block diagrams, schematics, and electrical requirements. Strong understanding of system architecture and the ability to work collaboratively with System Level Architects. Experience with common ASIC and processor architectures applicable to mNAND and SSD ASICs, such as ARM, RISC-V, and custom ASIC designs. Proficiency in hardware design tools and software. Excellent problem-solving skills and attention to detail. Strong communication and interpersonal skills. Ability to work effectively in a fast-paced and dynamic environment. Familiarity with NAND flash memory technology and SSD controller design. Proficiency in EDA schematic and simulation tools such as Cadence Allegro System Capture, Synopsys Design Compiler, Mentor Graphics PADS, Altium Designer, and OrCAD. Experience with logic verification tools such as Synopsys VCS, Cadence Incisive, and Mentor Graphics ModelSim. Preferred Skills Experience with advanced hardware technologies and methodologies. Knowledge of industry standards and best practices in hardware design. Familiarity with software development and integration. Benefits Competitive salary and benefits package. Opportunity to work on innovative and challenging projects. Collaborative and supportive work environment. Professional development and growth opportunities. About Micron Technology, Inc. We are an industry leader in innovative memory and storage solutions transforming how the world uses information to enrich life for all . With a relentless focus on our customers, technology leadership, and manufacturing and operational excellence, Micron delivers a rich portfolio of high-performance DRAM, NAND, and NOR memory and storage products through our Micron® and Crucial® brands. Every day, the innovations that our people create fuel the data economy, enabling advances in artificial intelligence and 5G applications that unleash opportunities — from the data center to the intelligent edge and across the client and mobile user experience. To learn more, please visit micron.com/careers All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, veteran or disability status. To request assistance with the application process and/or for reasonable accommodations, please contact hrsupport_india@micron.com Micron Prohibits the use of child labor and complies with all applicable laws, rules, regulations, and other international and industry labor standards. Micron does not charge candidates any recruitment fees or unlawfully collect any other payment from candidates as consideration for their employment with Micron. AI alert : Candidates are encouraged to use AI tools to enhance their resume and/or application materials. However, all information provided must be accurate and reflect the candidate's true skills and experiences. Misuse of AI to fabricate or misrepresent qualifications will result in immediate disqualification. Fraud alert: Micron advises job seekers to be cautious of unsolicited job offers and to verify the authenticity of any communication claiming to be from Micron by checking the official Micron careers website in the About Micron Technology, Inc.

Coimbatore, India Job Summary: The Product Development & Innovation Engineer is responsible for designing, developing, and improving new or existing products through innovative solutions. This role requires collaboration across teams to turn concepts into functional, market-ready products, ensuring alignment with customer needs, technological trends, and organizational goals. Key Responsibilities: Develop and prototype new products or improve existing ones based on market research and user feedback. Collaborate with cross-functional teams including design, manufacturing, marketing, and quality control. Conduct feasibility studies, risk assessments, and cost analyses for product concepts. Stay updated on emerging technologies and industry trends to drive innovation. Prepare technical documentation, including product specifications, testing protocols, and process guidelines. Lead pilot projects and support the transition from design to mass production. Identify opportunities for patenting innovations and support intellectual property processes. Ensure products comply with relevant standards, certifications, and regulations. Analyze product performance data and propose enhancements as needed. Contribute to innovation strategy and help build a culture of continuous improvement. Qualifications: Bachelor’s or Master’s degree in Engineering (Mechanical, Electrical, Electronics, Product Design, or related field). 2–5 years of experience in product development, R&D, or innovation roles. Proficiency in CAD tools (e.g., SolidWorks, AutoCAD) and simulation software. Knowledge of materials, manufacturing processes, and product life cycles. Experience in rapid prototyping and design validation methods. Key Skills: Strong problem-solving and analytical abilities Creative thinking and innovation mindset Excellent communication and teamwork skills Project management and multitasking Attention to detail and technical writing proficiency

Flex is the diversified manufacturing partner of choice that helps market-leading brands design, build and deliver innovative products that improve the world. A career at Flex offers the opportunity to make a difference and invest in your growth in a respectful, inclusive, and collaborative environment. If you are excited about a role but don't meet every bullet point, we encourage you to apply and join us to create the extraordinary. Job Summary To support our extraordinary teams who build great products and contribute to our growth, we’re looking to add a Senior Engineer - Planning located in Sriperumbudur. What a typical day looks like: Responsible for providing expertise and support to the Customer Focus Team (CFT) Ensuring the ability of the materials planning for a specific project or projects as required providing materials support to the weekly production planned orders and enables to achieve Kit on time drop to meet Customer Schedule. Key assignments include providing timely Materials status through use of available Shortage reports, Submission of Excess and Obsolete Inventory to the Customer, Work Order Management, inventory management, MRB and DR Management to achieve the operating goals. Materials Planners for New Emerging NPI Accounts to provide faster service to the NPI Customer to effectively communicate with the customer protecting Business interest of Flex. Collate the data based on the input received from CFT, do first level of analysis and share the clean data back to the planner as per agreed timelines. Monitor Inventory levels vs. goals, Shortage reports with detailed comments – CTB; Excess Mitigation with Buyers. Prepare the analysis for excess mitigation with the site buyer. Schedule and coordinate status of materials within or with the external suppliers to expedite materials in conjunction with the MRP, providing support and expertise to the Buyers as required. Review and assist the planner in generating the master production schedules, running Kinaxis can do simulation. Work orders and prepare Clear to Build Report based on the availability of the materials. Ensure all materials procedures are adhered to by the Planner. The experience we’re looking to add to our team: Min 6+ years of similar experience. Must be able to analyze supply chain for demand pull in or push out. Knowledge of BOMs and product structure. Experience in Master Scheduling Knowledge of Materials Requirement Planning. Knowledge of Lean Supply Chain. Advanced Excel with Intermediate Power Point What you will receive for the great work you provide Health Insurance Paid Time off #LP17 Job Category Global Procurement & Supply Chain Required Skills: Optional Skills: Flex pays for all costs associated with the application, interview or offer process, a candidate will not be asked for any payment related to these costs. Flex is an Equal Opportunity Employer and employment selection decisions are based on merit, qualifications, and abilities. We do not discriminate based on: age, race, religion, color, sex, national origin, marital status, sexual orientation, gender identity, veteran status, disability, pregnancy status, or any other status protected by law. We're happy to provide reasonable accommodations to those with a disability for assistance in the application process. Please email accessibility@flex.com and we'll discuss your specific situation and next steps (NOTE: this email does not accept or consider resumes or applications. This is only for disability assistance. To be considered for a position at Flex, you must complete the application process first).

Job Title: Robotics Engineer - ROS2 Development Experience - 2-10 Years Job Overview : We are seeking a highly skilled and motivated Robotics Engineers with a strong focus on ROS2 development to join our dynamic team. As a Robotics Engineer, you will be responsible for designing, developing, and implementing advanced robotic systems and applications using the Robot Operating System 2 (ROS2). You need to develop the behavioral and control systems, including planning and navigation needed for autonomous robots. This role requires a deep understanding of robotic software architecture, proficiency in ROS2, and experience with hardware integration and real-time systems and expertise in URDF (Unified Robot Description Format). Key Responsibilities : Design and Development : Develop robust and scalable robotic applications using ROS2. Implement software for various robotic systems, ensuring high performance and reliability. Hand-on with developing ROS2 nodes, Services/Clients, Publishers/Subscriber. Lead and develop path/motion planning algorithms that include route planning, trajectory optimization, decision making, and open space planning. Good understandings of Robot dynamics, kinematics and modeling. System Integration : Integrate sensors, actuators, and other hardware components with robotic systems. Ensure seamless communication between hardware and software layers. Experienced on integration with perception sensors such as IMU, GPS, Stereo Cameras, Lidar, Radar, and various other sensors. URDF Modeling : Create and maintain accurate URDF models for robotic systems. Ensure models accurately represent the physical configuration and kinematics of the robots. Algorithm Implementation : Implement and optimize algorithms for perception, localization, mapping, navigation, and control. Simulation and Testing : Utilize simulation tools to test and validate robotic systems in virtual environments like Gazebo, Rviz2 and Unity. Perform rigorous testing in real-world scenarios to ensure system robustness. Documentation : Create and maintain comprehensive documentation for system architecture, design decisions, algorithms, and user guides. Research and Development : Stay updated with the latest advancements in robotics and ROS2, and URDF. Contribute to the continuous improvement of development processes and tools. Must have worked with SLAM and NAV 2 Education Background: B.Tech (Mechatronics, Robotics , Mechanical, Electrical) Job Type: Full-time Pay: ₹1,000,000.00 - ₹2,400,000.00 per year Schedule: Day shift Experience: total work: 3 years (Preferred) Work Location: In person

Job Title : Engineer/Technical Officer (Industry 4.0/Manufacturing) Job Location : IIT Indore Key Responsibilities Hardware & System Design:· Assist in the development of PLC-based automation systems and electro-pneumatic setups. Interface sensors, actuators, controllers, and SMC machinery. Support circuit prototyping and embedded controller setup. Software & Control Systems: · Write scripts and logic for industrial control (ladder logic, Python, C/C++). · Support configuration of SCADA/HMI for monitoring and visualization. · Contribute to software modules for data acquisition and process optimization. Simulation & Modelling:· Use tools like MATLAB/Simulink or digital twin platforms to simulate manufacturing workflows. · Model control systems and validate against physical setups. · Perform system testing and help calibrate hardware models. Testing & Integration: · Conduct system-level tests for hardware and software integration. · Troubleshoot faults across mechanical, electrical, and software components. · Provide operational support and documentation for lab machines. Lab Coordination & Documentation: · Maintain technical records, wiring diagrams, SOPs, and compliance documents. · Support setup and demonstrations of automation experiments in the CoE. · Assist researchers and engineers with lab operations and project implementations. Key Skills required · Exposure to PLCs, SCADA/HMI, and industrial control systems. · Programming knowledge in C/C++, Python, or ladder logic. · Familiarity with microcontrollers (Arduino, STM32, Raspberry Pi). · Understanding of both hardware (sensors, actuators, circuits) and software (logic, data flow). · Proficiency in tools like MATLAB/Simulink, Proteus, KiCAD, or LabVIEW is a plus. · Excellent teamwork, organization, and documentation skills. Qualifications & Experience · Education: B.Tech/M.Tech/MSc or equivalent· Experience: 0–2 years (freshers with relevant internship or project experience are encouraged to apply). Preference: Candidates with exposure to industrial automation or smart manufacturing setups. Compensation : As per Industry Standards Interested candidates may click here to submit the application. Only shortlisted candidates will be called for a written test/interaction/interview. Mere fulfillment of the eligibility criteria does not entitle an applicant to be shortlisted. All the applications will be thoroughly evaluated for suitability with the company’s requirements. The company reserves the right to not fill up /cancel the post advertised without assigning any reason. In the case of selection, the role will be finalized by the selection panel and the decision will be binding. The position is contractual, full-time in nature and subject to periodic performance reviews. Job Types: Full-time, Permanent Pay: From ₹30,000.00 per month Benefits: Flexible schedule Paid sick time Paid time off Schedule: Day shift Work Location: In person

Job Summary: We are seeking a talented and detail-oriented Design Engineer to join our engineering team. The ideal candidate will be responsible for designing, developing, and improving products and systems in line with project requirements, quality standards, and customer needs. This role involves creating technical drawings, collaborating with cross-functional teams, and applying innovative thinking to solve design challenges. Role & responsibilities Develop and design components, assemblies, and systems using CAD software (e.g., SolidWorks, AutoCAD, CATIA). Create detailed 2D drawings and 3D models for manufacturing and prototyping. Conduct feasibility studies, engineering analyses, and simulations. Collaborate with manufacturing, production, and quality assurance teams to ensure design viability. Modify and revise existing designs to meet customer specifications, improve performance, or reduce costs. Prepare technical documentation including BOMs (Bill of Materials), specifications, and manuals. Participate in design reviews and provide technical support throughout the product lifecycle. Stay up-to-date with industry trends, technologies, and regulatory standards. Qualifications: Diploma/Bachelors degree in Mechanical, or a related Engineering field. 2+ years of experience in a design engineering role (entry-level candidates may be considered for junior roles). Proficiency in CAD software and engineering analysis tools. Strong understanding of engineering principles, manufacturing processes, and materials. Excellent problem-solving, analytical, and communication skills. Ability to manage multiple projects and meet tight deadlines. Preferred candidate profile Experience with FEA, CFD, or other simulation software. Knowledge of industry-specific standards (ASME, ISO, ANSI, etc.). Hands-on prototyping or testing experience. Develop and design components, assemblies, and systems using CAD software (e.g., SolidWorks, AutoCAD, CATIA). Perks and benefits Competitive salary and performance incentives Retirement plan options Paid time off and holidays Opportunities for professional development and growth Role: Design Engineer Industry Type: Industrial Equipment / Machinery Department: Research & Development Employment Type: Full Time, Permanent Role Category: Engineering & Manufacturing Education UG: B.Tech/B.E. in Mechanical, Diploma in Mechanical Key Skills Skills highlighted with ‘‘ are preferred keyskills Develop and design components systems using SolidWorks AutoCAD CATIAPrepare technical docCreate detailed 2D drawings and 3D models for manufacturingModify and revise existing designs to meet customer specifications improve performance or reduce costs About company GEM Group is a leading manufacturer and exporters of industrial dryers, we take pride in our commitment to delivering quality products and unparalleled experiences. Established in 1999, our company has consistently set industry standards, and we have had the privilege of commissioning over 76 processing lines worldwide for various applications. We have successfully earned the trust of clients across the USA, Asia, Australia, and Africa. Job Types: Full-time, Permanent Pay: ₹15,000.00 - ₹30,000.00 per month Benefits: Leave encashment Provident Fund Schedule: Day shift Fixed shift Monday to Friday Supplemental Pay: Yearly bonus Work Location: In person Application Deadline: 20/07/2025 Expected Start Date: 09/07/2025

Job Summary We are seeking a dedicated and skilled person to join our T R Rubber Private Limited team. The ideal candidate will be responsible for the manufacturing of rubber products, ensuring high-quality standards and adherence to safety protocols. This role requires attention to detail, technical skills, and the ability to work collaboratively in a fast-paced environment. Qualification: B.E. / B.Tech / Diploma in: Mechanical Engineering Rubber Technology Design Engineering Experience: Minimum 5 years in rubber component design and development Preferably in rubber-to-metal bonded product manufacturing (railway/automotive sectors) Key Responsibilities: Design & CAD Modeling Design rubber-to-metal bonded components (Spheriblocs, bump stops, axle box bushes, etc.) based on: RDSO drawings Customer specifications Internal requirements Develop: 3D CAD models considering rubber deformation and dynamic behavior 2D detailed drawings for manufacturing and quality references Tooling & Mould Design Create shrink-fit geometries, groove details, metal inserts Generate tooling drawings for mould design , section views, and die finalization Collaborate with Tool Room and Production for: Design reviews Pilot trials Tool validation Simulation & Validation Use simulation software (preferably Abaqus / HyperWorks) for: Stress-strain analysis Fatigue and NVH behavior Load transfer and deformation mapping Validate bonding zones and rubber-metal interface durability Documentation & Control Prepare and manage: Bill of Materials (BOM) Part numbers Revision-controlled drawings ECN/ECR records and change management docs Product specifications and design reports Technical Support & Standards Assist during customer trials and technical approvals Provide design insights to QA/QC, NPD, and production teams Ensure compliance with: RDSO, ISO 3302, DIN 53505, ASTM standards GD&T, tolerancing, shrinkage and parting line considerations Design Software & Tools SolidWorks : 3D modeling and drafting AutoCAD : 2D layout and production drawings Abaqus / HyperWorks : Rubber part simulation and FEA Job Type: Full-time Pay: ₹20,000.00 - ₹30,000.00 per month Benefits: Health insurance Provident Fund Schedule: Day shift Supplemental Pay: Performance bonus Yearly bonus Application Question(s): Current Salary: Expected Salary: Current Organization and Notice period: Experience: Design of Rubber Product: 5 years (Preferred) Work Location: In person Expected Start Date: 15/08/2025

1. Support the development and tuning of flight control algorithms (e.g., PID) to ensure flight stability and autonomous navigation. 2. Integrate onboard sensors (IMU, GPS, barometer) with flight control systems and assist in data calibration and testing. 3. Write and maintain embedded code for microcontrollers and real-time drone applications. 4. Participate in hardware-in-the-loop (HIL) and software simulation testing to validate system behavior. 5. Assist in live drone testing—conduct pre-flight checks, monitor telemetry, and support data logging. 6. Help troubleshoot firmware and communication issues between flight controllers and onboard systems. 7. Maintain clear documentation of code, test cases, and results; collaborate using version control tools (e.g., Git). 8. Stay updated on open-source drone platforms like PX4 and ArduPilot, and actively contribute to prototype development and iteration. Job Type: Full-time Pay: ₹600,000.00 - ₹900,000.00 per year Benefits: Flexible schedule Paid sick time Paid time off Schedule: Day shift Fixed shift Monday to Friday Work Location: In person

Job Summary: We are looking for a highly motivated and technically sound R&D and NPD (New Product Development) Engineer to join our innovation team. The candidate will be responsible for researching, designing, developing, and launching new capacitor products, as well as improving existing ones based on market and customer needs. Key Responsibilities: Lead and support new product development projects from concept to production Conduct market and technical feasibility analysis for new capacitor designs Design and develop prototype capacitors and test them under various conditions Prepare detailed documentation, test plans, and validation reports Collaborate with cross-functional teams including Quality, Production, and Sales Maintain up-to-date knowledge of industry standards, technologies, and competitors Ensure compliance with safety and regulatory requirements Qualifications: B. Tech / M. Tech in Electrical, Mechanical, or relevant engineering discipline 3–8 years of experience in capacitor manufacturing or similar R&D/NPD roles Hands-on experience with product development lifecycle and lab testing Skills Required: Strong knowledge of capacitor types, materials, and testing procedures Familiarity with design tools, lab instruments, and simulation software Proficient in AutoCAD, SolidWorks, CorelDRAW Analytical mindset with problem-solving ability Excellent communication and project management skills Job Type: Full-time Benefits: Cell phone reimbursement Health insurance Schedule: Day shift Weekend only Supplemental Pay: Overtime pay Yearly bonus Work Location: In person

Work Schedule Standard (Mon-Fri) Environmental Conditions Office Job Description Do you have a passion for innovative ideas and groundbreaking discoveries? With over $1 billion invested annually in R&D, at Thermo Fisher Scientific you’ll help solve some of the world’s toughest challenges, from giving cancer patients hope, ensuring safe drinking water and helping law enforcement tackle cases through forensics. We empower our teams to put science into meaningful action and give our R&D colleagues the autonomy, resources and tools they need to take science a step beyond. Role Purpose Summary: The "Sr. Staff Engineer, Electrical" is a member of a global R&D Team. The role is of a hands-on Electrical/Electronic engineer who is motivated to actively contribute to the new design and update of existing products. The person will play key role in architecting the systems, be involved from idea to product launch/update and own the design aspects and address all technical challenges including regulatory certifications. Roles & Responsibilities Serve thought process leadership for building depth of embedded design for team. Understand product function & convert relate design to Embedded requirements. Perform reviews on design concepts, component selections, trade off analysis drive culture of simulation, design calculations, margin analysis & design process rigor before design finalization. Build and review & approve the design documents and verification plan mapping to all the requirements including key performance & reliability requirements. Approve the design performance meets the requirements, stays in sync with the Manufacturability and Serviceability, and achieve the cost/reliability target. Work with cross function team to capture requirements, perform system / subsystem design, finalize electronics design requirement by reviewing with systems & global engineering teams. Provide design options & tradeoff analysis to meet the requirements Mentor & approve resolution for technical challenges. Collaborate closely with the other engineering team members to have design meet with compelling design and form-factors that also meet regulatory, safety, environmental, reliability, thermal and interface standard (Ethernet, USB, etc.) compliance requirements. Ensure design meets DFx requirements Continuously learns and grow technical depth and knowledge across product lines. Candidate Educational & Professional Experience Requirement: Masters or Bachelor’s degree in Electrical/Electronics engineering, or related field or equivalent. 15+ years of proven experience in hardware design and development in embedded system design with strong understanding on testing & manufacturing. Proficiency Requirements Must Have: Should have demonstrated proficiency in working with system/software/Firmware/hardware/ Electrical requirements development and validation Hands on experience in analog, digital and power supply design. Also, interfacing electro-mechanical and other peripherals in instrument design with sensors and control algorithm. Strong knowledge in alternate design analysis/part substitute for cost out ideas and obsolescence management including design analysis for quality, reliability, power consumption, timing parameters etc. Should have good knowledge on the compliance requirement & should support product regulatory compliance testing including EMC/EMI, CCC, UL, RoHS, etc. Proficient in debugging instruments (digital oscilloscopes, logic analyzers, spectrum analyzers); Experience in practices for Design for Test (DFT), DFR and Design for Manufacturing (DFM) background. Strong analytical and problem-solving skills and communication skills. Strong knowledge of Software & Firmware Engineering principles Agility to multiple simultaneous projects, tasks & programs to suit business needs Desirable Experience with cost take out/VAVE methodologies and Phase gate process C/C++ Embedded Programming FPGA based Design with programming using HDL Benefits We offer competitive remuneration, annual incentive plan bonus, healthcare, and a range of employee benefits. Thermo Fisher Scientific offers employment with an innovative, forward-thinking organization, and outstanding career and development prospects. We offer an exciting company culture that stands for integrity, intensity, involvement, and innovation!

Work Schedule Standard (Mon-Fri) Environmental Conditions Office Job Description Do you have a passion for innovative ideas and groundbreaking discoveries? With over $1 billion invested annually in R&D, at Thermo Fisher Scientific you’ll help solve some of the world’s toughest challenges, from giving cancer patients hope, ensuring safe drinking water and helping law enforcement tackle cases through forensics. We empower our teams to put science into meaningful action and give our R&D colleagues the autonomy, resources and tools they need to take science a step beyond. Role Purpose Summary: The Hardware Engineer III is a professional level member of a global R&D Team. The role is of a hands-on Electrical/Electronic engineer who is motivated & technically competent of the new product design and update of existing products. The person will play key role in demonstrating engineering knowledge to assist team in its PCBA Risk Mitigation strategy. Job Title: Engineer III, Electrical Roles & Responsibilities: As part of a multi-functional development team, major responsibility will include driving PCBA Risk mitigation strategy and execution of projects for Electronics commodities on product level. Own & Implement technically exciting projects right from scoping to implementation Should have good knowledge on the compliance requirement & should support product regulatory compliance testing. Responsible for technical delivery of all Electrical & Electronics related projects. Review designs and concepts from the team to ensure the technical quality of actions. Proficient to synthesise specifications of electronic components into product fitment. Work with cross function team to understand customer requirement, participate in system / subsystem design review, finalize electronics design requirement by reviewing with systems & global engineering teams Design schematic of digital, mix signal & power electronics circuit board that satisfied the design requirement Agility to work on multiple simultaneous projects, tasks & programs to suit business needs Provide Plan A, Plan B. Drive design options & tradeoff analysis meeting diverse product requirements. Build the design documents for design review (HLD, DFMEA, requirements traceability matrix etc.), and verification plan mapping to the key performance & reliability requirement. Verify the design performance qualifying requirements, meeting Manufacturability and Serviceability, and achieve the cost/reliability target. Collaborate with multi-domain teams assisting product development meeting regulatory, safety, environmental, reliability, thermal and interface standard (Ethernet, USB, etc.) compliance requirements. To work with the sourcing team and the supplier to coordinate the manufacturing and provide detailed requirement for FCT of PCBA to make sure the PCBA from production line can meet design requirement. Train, mentor and enhance technical capability of team members Skills and Proficiencies: Excellent understanding of Electrical and Electronics Engineering fundamentals Ability to drive decision through design and simulation tools. Mentor different tools and intent with hands-on experience Can conceptualize design architectures & identify challenges in designs. Applies self-learning to derive component functioning Independently conceptualize and run design calculations to prove design Collaborate & drive concepts, trade off analysis and leads component selection to meet the technical specifications Lead and drive design analysis and simulation ensuring design optimization and confirmation to requirements Conduct testing as per test plans (including functional and regulatory test cases). Record test results Develop and deliver Schematic based on design document and input. Build design documents & artifacts as per design process Ability to optimally work on the below tasks with mentorship Preferred Qualifications: Bachelor’s degree in Electrical / Electronic Engineering with proven track of over 10 years Knowledge of any Circuit design and Simulation tools. Handle medium to high complexity projects independently with ability to be a mentor for early talent. Build work breakdown structure (WBS) of projects with support from senior project managers Engage with project multi-functional teams for reviews to seek inputs under the guidance of Program & design managers Desirable: Exposure to Project Management C/C++ Embedded Programming Knowledge on FPGA based Design and programming using HDL Benefits We offer competitive remuneration, annual incentive plan bonus, healthcare, and a range of employee benefits. Thermo Fisher Scientific offers employment with an innovative, forward-thinking organization, and outstanding career and development prospects. We offer an exciting company culture that stands for integrity, intensity, involvement, and innovation!

Position – Cybersecurity Trainer We are seeking a skilled Cybersecurity Trainer with 2–3 years of relevant experience to deliver an industry aligned cybersecurity training program. The trainer will be responsible for conducting practical and theoretical sessions, focusing on system security, ethical hacking, network defense, and emerging cybersecurity threats. Key Responsibilities: • Deliver training for the following curriculum modules: • Fundamentals of Cybersecurity • Network Security and Protocols • Ethical Hacking and Penetration Testing • Cyber Laws and Governance • Real-time Labs: Phishing, Ransomware Simulation, Vulnerability Scanning • SOC Operations and Tools (e.g., Wireshark, Splunk, Burp Suite) • Conduct interactive, hands-on sessions using live lab environments, simulators, or online platforms (TryHackMe, Hack The Box, etc.) Qualifications: - Bachelor’s degree in Information Security, Computer Science, or equivalent field - 2–3 years of experience in Cybersecurity training, IT security, or a related domain with Practical knowledge in Networking security protocols, Penetration testing and vulnerability assessment tools, SOC tools like SIEM. • Operating systems (Linux, Windows Server) and virtual machines and Tools like Kali Linux, Metasploit, Nmap, Wireshark, and Burp Suite. Additional Information: • Location: Tirunelveli Interested candidates should submit their resume to nasar@a2000india.com

COMPANY INTRODUCTION Emirates NBD is a market leader across the MENAT (Middle East, North Africa and Türkiye) region with a presence in 13 countries, serving over 20 million customers. The Emirates NBD Group has a total of 853 branches and 4,213 ATMs / SDMs. Emirates NBD is the leading financial services brand in the UAE with a Brand value of USD 3.89 billion At the bank, we serve our customers and help them realise their financial objectives through a range of banking products and services including retail banking, corporate & institutional banking, Islamic banking, investment banking, private banking, asset management, global markets and treasury, and brokerage operations We are a key participant in the global digital banking industry, with 97% of all financial transactions and requests conducted outside of our branches. We also operate Liv, the lifestyle digital bank by Emirates NBD. With close to half a million users, it continues to be the fastest-growing digital bank in the region The Offensive Security Assessments Manager will manage and conduct covert targeted penetration testing for Emirates NBD installations and controls through focused threat based methodologies as a simulated adversary to expose and exploit vulnerabilities to improve Cyber readiness and review security controls and system configurations across IT systems across the group to ensure their security posture and compliance. Key Responsibilities: Manage and maintain the Offensive Security Assessment program as part of the Threat and Compliance (TCM) Charter and associated operating procedures based on the requirements of Emirates NBD policy, audit, compliance and regulatory requirements Maintain and manage Emirates NBD threat modelling framework and operationalize these models into the offensive security assessment program Collect open source intelligence on threats and vulnerabilities applicable to Emirates NBD technology stack Carry out scenario based war gaming activities Ensure threat controls and systems are reviewed for appropriate, effective and optimal configuration across the Group Participate in event planning stages to develop Cyber assessment plans and conduct assessment tests against Emirates NBD group installations & controls Identify and track IT risks and gaps that are remediated through operational activities or treated via risk management process. Responsible for threat activity reporting and insight on the IT technology assets used by the group. Managing planned and ad-hoc review and reporting requests from stakeholders across Emirates NBD Group IT and business functions Develop attack vectors, exploit payloads and backdoors as necessary for the successful execution of the Offensive Security Assessment program Contribute on Offensive Security automation initiatives Conduct periodic Purple/Red Team assessments and other attack simulation goals. Programming language proficiency in one or more languages C, C++, Python, CSharp, ASM etc. Prepare and deliver technical and management reports and presentations Prioritize business requirements and manage backlogs for team deliveries Accountable for stakeholder engagement and relationships to deliver security assessments as per TCM Charter Research new threats vectors / attack methods that are cutting edge in testing control effectiveness Enhance technical security assessment & pen testing capabilities to ensure effective assessment for an evolving technology landscape Build new periodic assessment frameworks and methodologies that help contribute to a more efficient method of executing the charter Improve threat modelling framework to ensure that new relevant threat vectors are identified and are part of the framework Ensure coverage of policy, audit, compliance and regulatory requirements. Ensure that offensive security exercises are carried out cautiously without adverse business impact Key Requirements: Bachelors or Master’s Degree in Computer Science, Mathematics or equivalent discipline Master’s Degree in Business Management or equivalent Certifications such as CISSP, OSCP, OSCE, OSEP, OSWE, CREST, GPEN, SANS GXPN 5-7 years of experience with technical Cyber security 3-4 years of experience with Red Team or penetration testing or offensive Cyber testing Experience with Bash scripting, Perl, Java, Python or R Strong hold of Cloud Security - CICD Security - Experience in various tools VAF Experience with malware analysis tools Experience with mobile and digitization platforms Experience with platforms like Cloud, DBMS (SQL or NoSQL based), Containerization Technologies & Micro services/API based architecture Experience with MITRE Attack Framework Strong technical background covering heterogeneous technologies and multiple security domains (Technical) Deep knowledge of the gaps and weaknesses of a typical heterogeneous banking environment including the toolsets required for security assessments (Technical) Deep experience in depicting proof of concept exploits for vulnerabilities, accurate threat assessment and mitigation recommendation. (Technical) Deep experience in the preparation and facilitation of war gaming. Identify gaps and opportunities by utilizing niche adversarial experience of the team (Technical) Deep experience in evaluating threats as per the latest threat environment affecting the region (EMEA & North Africa) and the world (Technical) Deep knowledge and skills in breaking controls and of polices ,standards and required controls (both technical and compliance based) (Technical) Deep threat modelling experience

The Group You’ll Be A Part Of Many years ago, Lam Research embarked on a journey to set up a global center in Bangalore to expand its reach for Indian talent pool. Over the decade, this center expanded its capability and scope beyond engineering to global manufacturing, supply chain operations and other shared services. One of the major functional groups of this entity is LIGHT (Lam India Global Hardware Technology). In Hardware group, mechanical engineers, simulation analysts, electrical engineers, manufacturing engineers, and engineering support functions work collaboratively to design, develop sub-assemblies and sub-systems for Lam’s next-generation products. LIGHT has completed more than a decade of growth and has emerged as a major new product development and sustaining engineering team for Lam’s global engineering footprint. There is an opening for the role of Lead Mechanical Engineer. This position is based out of Bangalore, directly reporting to the leader of WETS Engineering Excellence Team (WEET) in LIGHT. This individual shall collaborate with engineers in India, Austria and United States on NSR Activities of WETS product lines. The Impact You’ll Make At Lam, as a Lead Mechanical Engineer for Non-Standard-Requests (also called NSR PE), you will be closely working with the Engineering, Product Management, Account Teams & Cross functional teams across global regions of Lam Research to manage all aspects of support for Productivity and Technology Upgrades to our global customers through Non-Standard requests. NSR PE’s are key contributors to managing the NSR workflows through the process. The role serves as a liaison between external (AT, sales ops) and internal (engineering, GOps) customers, and drives efficiencies of the process as a whole, while executing / rejecting certain requests or highlighting certain NSRs for option conversion. Eligibility Criteria Bachelor’s degree in mechanical and related engineering with a minimum of 8 years of relevant experience (or) master’s degree with a minimum of 6 years of relevant experience. Job Responsibilities Review NSR submissions for completeness, accuracy and technical feasibility as well as work with requestors to clarify requirements. With clear explanation Approve/Reject NSR on Change Tracking Log (CTL) for each FCID via SAP CRM Partner with accounts team and product management for shared responsibilities based on need. Confirm Customer Request Dates (CRD) are realistic. If dates are inside Lead Time, understand and validate justification. Expedite, manage expectations/ communicate risks with Sales Ops. Review and translate customer requirements into engineering specifications including component impact analysis. Project manage NSRs based on requirements defined by Sales and Engineering to meet the customer’s application. Drive clarity in initial customer request. Confirm that Engineering has sufficient information to develop scope, quote and design Coordinate mechanical, electrical, and software engineering efforts to meet the production requirements of customer specific systems. Execute the NSR by performing required design work and BoM updates Reduce NSRs by interacting with PMs, Engineering, and other cross-functional teams to cancel redundant design activities. Work with Sales Ops, Product Managers and PG POA team to highlight NSR candidates for option conversion to POA (Product Option Architecture) Responsible to meet the NSR KPIs Mandatory Skills Experience in product structuring and configuration management Experience with MRP system planning, ordering, and scheduling materials using SAP Experience in Bill of Material structures, Engineering Change process and PLM Ability to successfully interact with and coordinate across diverse parts of the organization, technical and non-technical Exposure to Product Management Excellent Presentation and communication skills (both written and verbal) Experience in product design and development Desirable Skills Good knowledge of semiconductor tools preferably Electrofill tools Experience in CRM and Fiori application Experience in semiconductor capital equipment industry will be preferred Strong analytical and problem-solving skills Exposure to PDM Experience in product design and development Our Commitment We believe it is important for every person to feel valued, included, and empowered to achieve their full potential. By bringing unique individuals and viewpoints together, we achieve extraordinary results. Lam Research ("Lam" or the "Company") is an equal opportunity employer. Lam is committed to and reaffirms support of equal opportunity in employment and non-discrimination in employment policies, practices and procedures on the basis of race, religious creed, color, national origin, ancestry, physical disability, mental disability, medical condition, genetic information, marital status, sex (including pregnancy, childbirth and related medical conditions), gender, gender identity, gender expression, age, sexual orientation, or military and veteran status or any other category protected by applicable federal, state, or local laws. It is the Company's intention to comply with all applicable laws and regulations. Company policy prohibits unlawful discrimination against applicants or employees. Lam offers a variety of work location models based on the needs of each role. Our hybrid roles combine the benefits of on-site collaboration with colleagues and the flexibility to work remotely and fall into two categories – On-site Flex and Virtual Flex. ‘On-site Flex’ you’ll work 3+ days per week on-site at a Lam or customer/supplier location, with the opportunity to work remotely for the balance of the week. ‘Virtual Flex’ you’ll work 1-2 days per week on-site at a Lam or customer/supplier location, and remotely the rest of the time.

Job description Elecbits is built with a Mission to Democratize and Digitize Electronics Development and Manufacturing in India, for the world by building a Physical, Digital and Talent infrastructure for electronics enterprises. The Mothership of all Electronics companies. Responsiblities: Product Development and Leadership: Architect, design, and develop firmware for electronic systems, including IoT and fintech products. Write efficient and optimized firmware code in C/C++, Embedded C, and register-level programming. Develop and optimize algorithms for signal processing, control systems, data analysis, and other relevant applications. Create firmware modules for communication, control, and other functionalities. Collaboration and Communication: Collaborate with hardware engineers to define hardware/firmware interfaces and specifications. Work closely with software developers to integrate firmware with higher-level software components and ensure seamless functionality. Collaborate with product managers to define project requirements, scope, and timelines, and actively participate in project planning and execution. External Relations and Partnerships: Lead the debugging and troubleshooting efforts to identify and resolve firmware and algorithm-related issues. Develop and execute test plans to ensure firmware quality and performance. Prepare and maintain detailed documentation, including design specifications, test plans, and technical reports. Technical Expertise and Market Awareness: Stay informed on the latest market trends, emerging technologies, and the competitive landscape within the electronics industry to identify new opportunities for product innovation. Team Management and Development: Create comprehensive firmware simulation models and test cases. Perform firmware simulations to verify functionality, performance, and reliability. Stay up-to-date with the latest industry trends and emerging technologies in firmware development and algorithm design. Drive continuous improvement initiatives to enhance firmware functionality and performance. Project Management and Resource Allocation: Optimize firmware for resource-constrained environments and real-time embedded systems with strict timing constraints. Implement efficient algorithms and data structures. Perform firmware simulations to verify functionality, performance, and reliability. Requirements: Education and Experience: Bachelor’s degree in Computer Science, Electrical Engineering, or a related field. 4+ years of experience in firmware design and development. Strong proficiency in C/C++ programming for embedded systems, with a focus on register-level programming and library creation. Experience with hardware/firmware co-design and familiarity with hardware design principles (recommended). Programming Proficiency: Proficiency in frameworks and tools: Espidf, Arduino, STM32 CUBEIDE. Experience with Real-Time Operating Systems (RTOS): FreeRTOS, Zephyr, or embedded Linux. Proven track record of delivering high-quality firmware and algorithm solutions on schedule. Experience with low-power firmware development and knowledge of wireless communication protocols (e.g., Bluetooth, Wi-Fi, Zigbee). System Understanding: Strong problem-solving skills and ability to analyze and troubleshoot complex firmware and algorithm issues. Project mgmt, communication, and problem-solving skills. Ideal: Understanding of event-driven programming and firmware design for auto-calibration algorithms. Knowledge of security protocols for IoT and fintech applications (optional but desirable).

Role Description Role Proficiency: Independently develop data-driven solutions to difficult business challenges by utilize analytical statistical and programming skills to collect analyze and interpret large data sets under supervision. Outcomes Work with stakeholders throughout the organization to identify opportunities for leveraging data from our customers to make models that can generate business insights Create new experimental frameworks or build automated tools to collect data Correlate similar data sets to find actionable results Build predictive models and machine learning algorithms to analyse large amounts of information to discover trends and patterns. Mine and analyse data from company databases to drive optimization and improvement of product development marketing techniques business strategies etc Develop processes and tools to monitor and analyse model performance and data accuracy. Develop Data Visualization and illustrations on given business problem Use predictive modelling to increase and optimize customer experiences and other business outcomes. Coordinate with different functional teams to implement models and monitor outcomes. Set FAST goals and provide feedback on FAST goals of reportees Measures Of Outcomes Number of business processes changed due to vital analysis. Number of Business Intelligent Dashboards developed Number of productivity standards defined for project Number of Prediction and Modelling models used Number of new approaches applied to understand the business trends Quality of data visualization done to help non-technical stakeholders comprehend easily. Number of mandatory trainings completed Outputs Expected Statistical Techniques: Apply statistical techniques like regression properties of distributions statistical tests etc. to analyse data. Machine Learning Techniques Apply machine learning techniques like clustering decision tree learning artificial neural networks etc. to streamline data analysis. Creating Advanced Algorithms Create advanced algorithms and statistics using regression simulation scenario analysis modelling etc. Data Visualization Visualize and present data for stakeholders using: Periscope Business Objects D3 ggplot etc. Management And Strategy Oversees the activities of analyst personnel and ensures the efficient execution of their duties. Critical Business Insights Mines the business’s database in search of critical business insights and communicates findings to the relevant departments. Code Creating efficient and reusable code meant for the improvement manipulation and analysis of data. Version Control Manages project codebase through version control tools e.g. git bitbucket etc. Predictive Analytics Seeks to determine likely outcomes by detecting tendencies in descriptive and diagnostic analysis Prescriptive Analytics Attempts to identify what business action to take Create Reports Creates reports depicting the trends and behaviours from the analysed data Training end users on new reports and dashboards. Document Create documentation for own work as well as perform peer review of documentation of others' work Manage Knowledge Consume and contribute to project related documents share point libraries and client universities Status Reporting Report status of tasks assigned Comply with project related reporting standards and process Skill Examples Excellent pattern recognition and predictive modelling skills Extensive background in data mining and statistical analysis Expertise in machine learning techniques and creating algorithms. Analytical Skills: Ability to work with large amounts of data: facts figures and number crunching. Communication Skills: Communicate effectively with a diverse population at various organization levels with the right level of detail. Critical Thinking: Data Analysts must look at numbers trends and data and come to new conclusions based on the findings. Strong meeting facilitation skills as well as presentation skills. Attention to Detail: Making sure to be vigilant in the analysis to come to correct conclusions. Mathematical Skills to estimate numerical data. Work in a team environment and have strong interpersonal skills to work in collaborative environment Proactively ask for and offer help Knowledge Examples Knowledge Examples Programming languages – Java/ Python/ R. Web Services - Redshift S3 Spark DigitalOcean etc. Statistical and data mining techniques: GLM/Regression Random Forest Boosting Trees text mining social network analysis etc. Google Analytics Site Catalyst Coremetrics Adwords Crimson Hexagon Facebook Insights etc. Computing Tools - Map/Reduce Hadoop Hive Spark Gurobi MySQL etc. Database languages such as SQL NoSQL Analytical tools and languages such as SAS & Mahout. Practical experience with ETL data processing etc. Proficiency in MATLAB. Data visualization software such as Tableau or Qlik. Proficient in mathematics and calculations. Spreadsheet tools such as Microsoft Excel or Google Sheets DBMS Operating Systems and software platforms Knowledge about customer domain and about sub domain where problem is solved Proficient in at least 1 version control tool like git bitbucket Have experience working with project management tool like Jira Additional Comments Must have -Statistical Concepts, SQL, Machine Learning (Regression and Classification), Deep Learning (ANN, RNN, CNN), Advanced NLP, Computer Vision, Gen AI/LLM (Prompt Engineering, RAG, Fine Tuning), AWS Sagemaker/Azure ML/Google Vertex AI, Basic implementation experience of Docker, Kubernetes, kubeflow, MLOps, Python (numpy, panda, sklearn, streamlit, matplotlib, seaborn) Skills Data Management,Data Science,Python

WHAT YOU DO AT AMD CHANGES EVERYTHING We care deeply about transforming lives with AMD technology to enrich our industry, our communities, and the world. Our mission is to build great products that accelerate next-generation computing experiences - the building blocks for the data center, artificial intelligence, PCs, gaming and embedded. Underpinning our mission is the AMD culture. We push the limits of innovation to solve the world’s most important challenges. We strive for execution excellence while being direct, humble, collaborative, and inclusive of diverse perspectives. AMD together we advance_ SMTS SILICON DESIGN ENGINEER The Role We are currently seeking a highly skilled verification engineer for GFX sub-system(Graphics Power Management) verification team. The Person A successful candidate will work with senior silicon design engineers. The candidate will be highly accurate and detail-oriented, possessing good communication and problem-solving skills. Key Responsiblities Work with all partners such as lead architects and block design teams to understand features to be implemented and verified. Develop robugs test plan for both synthetic and real workload trace Debug verification test failures, working with the design teams Make sure the design meets functional/performance/power expectations Must have ASIC design knowledge and be able to debug Verilog RTL code using simulation/emulation tools and do test plan, test creation and triage, coverage, and assertion etc. Must demonstrate strong analytical thinking and problem-solving skills with an excellent attention to detail. Must have good English hearing, speaking, reading, and writing capabilities. Must have good teamwork and interpersonal skills. Graphics Pipeline Experience Is Preferred. Deep knowledge of computer architecture is preferred. Must be a self-starter, and able to independently drive tasks to completion. Preferred Experience Good teamwork and communications skills are required. Minimum 12 Years Of Experience In ASIC Verification Must be proficient in Verilog, System Verilog, UVM Methodologies, and C/C++ programming Academic Credentials B.E/B.Tech or M.E/M.Tech degree in ECE/ Electrical Engineering / Computer Engineering with Digital Systems/VLSI as major with 12+ Years of Exp Location : Hyderabad, India Benefits offered are described: AMD benefits at a glance. AMD does not accept unsolicited resumes from headhunters, recruitment agencies, or fee-based recruitment services. AMD and its subsidiaries are equal opportunity, inclusive employers and will consider all applicants without regard to age, ancestry, color, marital status, medical condition, mental or physical disability, national origin, race, religion, political and/or third-party affiliation, sex, pregnancy, sexual orientation, gender identity, military or veteran status, or any other characteristic protected by law. We encourage applications from all qualified candidates and will accommodate applicants’ needs under the respective laws throughout all stages of the recruitment and selection process.

1. JOB OVERVIEW We are seeking a proactive Mechatronics Intern to support design, simulation, and documentation of electromechanical systems. The role involves hands-on work with CAD tools, embedded systems, and testing setups. Ideal for candidates with a strong foundation in mechanical and electrical principles, this internship offers real-world R&D experience in a collaborative environment. Ø Position: Mechatronics Intern Location: Goa Experience: 0-1 Year Number of Openings : 2 Job Location : Panaji, Goa Stipend: Rs. 10,000/- Industry: Engineering Research and Development / Technology Working Hours: 1:30 PM to 10:30 PM IST Immediate Joiners Will Be Preferred 2. ROLES AND RESPONSIBILITIES Assist in drafting and compiling technical and backdated R&D reports Support in mechanical and electrical design of components and integrated systems Create and maintain detailed CAD models, wiring diagrams, and schematics Participate in testing, troubleshooting, and performance analysis of electromechanical systems Collaborate with cross-functional teams (mechanical, electrical, software) to develop working prototypes Conduct literature reviews, market research, and gather supporting evidence for documentation Set up and monitor experiments involving sensors, control logic, and system behavior Document PCB layouts, embedded control strategies, and power management approaches Perform simulation-based evaluations (CFD, FEA, electrical circuit analysis) Ensure compliance with applicable engineering standards and safety protocols Organize documentation and visuals (charts, diagrams) for review and presentation Collect, format, and present experimental and test data for inclusion in R&D reports Adapt technical language and visuals for intended audiences Incorporate stakeholder feedback to improve technical documentation Stay updated with emerging mechatronics technologies and tools; apply them as needed 3. REQUIRED SKILLS & QUALITIES Strong foundation in both mechanical and electrical engineering principles Proficiency in CAD software for mechanical (SolidWorks, AutoCAD) and electrical design (EPLAN, AutoCAD Electrical) Ability to create accurate 3D models, 2D technical drawings, and electrical schematics Understanding of circuit design, wiring layouts, and SLDs Familiarity with control systems, sensors, and actuators Experience with basic embedded systems and microcontroller interfacing (e.g., Arduino, STM32, Raspberry Pi) Knowledge of electrical and mechanical standards (NEC, IEC) and safety protocols Familiarity with simulation tools (e.g., ANSYS, MATLAB/Simulink, Multisim, openfoam) for both structural and circuit-level analysis Basic knowledge of renewable energy systems, especially solar components Hands-on experience with testing equipment. Technical writing and documentation skills for R&D reports and project records Good analytical thinking, troubleshooting skills, and attention to detail Ability to work with backdated data and reconstruct project development timelines Proficiency in MS Office tools for data analysis and documentation Strong communication and teamwork skills 4. ABOUT US Enigmasoft Technologies is a forward-thinking IT and engineering solutions provider. Specializing in innovative, sustainable tech, the company helps businesses optimize operations and improve efficiency through tailored solutions. With a focus on both software and hardware engineering, Enigmasoft delivers high-quality, cutting-edge products across various industries, ensuring clients achieve their goals with advanced technology. The company's commitment to R&D ensures they stay at the forefront of technological advancements, driving progress and delivering excellence globally. Our Culture We are committed to a professional and supportive environment with a strong focus on work-life balance. Our diverse workplace fosters creativity and innovation while promoting a healthy gender balance. Why you should join us Working at Enigmasoft Technologies is rewarding! Join us to grow, develop, and be part of an incredible journey where you can take on roles beyond a job description. 5. HOW TO APPLY Interested candidates can apply online at: https://enigma.keka.com/careers or share their profile at: hr@enigma-tech.io Visit us at: http://enigma-tech.io

1. JOB OVERVIEW We are looking for an enthusiastic Electrical Engineering Intern in Goa to support our engineering team. The role involves assisting in electrical design, drafting using CAD software, testing, troubleshooting, and documentation. Ideal candidates should have a basic understanding of electrical systems, good communication skills, and a willingness to learn. This is a great opportunity for freshers or students (BE/B.Tech/ME/M.Tech) to gain hands-on industry experience. Ø Position : Electrical Engineering Intern Location: Goa Experience: 0-1 Years Number of Openings: 2 Job Location: Panaji, Goa Qualification: Degree – BE / B.Tech / ME / M.Tech Stipend: ₹10,000 Industry: Engineering Research and Development / Technology Working Hours: 1:30 PM to 10:30 PM IST Immediate Joiners Will Be Preferred 2. RESPONSIBILITIES AND DUTIES Assist in designing electrical systems and components Collaborate with senior engineers and team members to develop and implement electrical solutions Support the preparation of electrical drawings and documentation using CAD software Participate in testing and troubleshooting electrical systems Contribute to the development and improvement of existing electrical systems Ensure compliance with safety standards and electrical codes Maintain accurate records and preparing technical reports Provide technical support and assistance as needed Learn and apply new technical skills and knowledge relevant to the job 3. QUALIFICATIONS Basic understanding of electrical engineering principles Ability to read and interpret electrical schematics and blueprints Familiarity with electrical testing and measurement equipment Basic knowledge of renewable energy systems (preferred) Proficiency in using simulation software for electrical systems (preferred) Strong analytical and troubleshooting skills Effective verbal and written communication skills 4. KEY SKILLS Basic knowledge of Electrical circuits and systems Hands-on experience with CAD software (e.g., AutoCAD, EPLAN) - (preferred) Understanding of electrical codes and standards (e.g., NEC, IEC) - (preferred) Good knowledge of creating and reading of SLD (e.g., NEC, IEC) Proficiency in MS Excel and Word Basic knowledge of electrical safety protocols Willingness to learn and adapt Problem-solving skills Good communication skills (verbal and writing skills) 5. ABOUT US Enigmasoft Technologies is a forward-thinking IT and engineering solutions provider. Specializing in innovative, sustainable tech, the company helps businesses optimize operations and improve efficiency through tailored solutions. With a focus on both software and hardware engineering, Enigmasoft delivers high-quality, cutting-edge products across various industries, ensuring clients achieve their goals with advanced technology. The company's commitment to R&D ensures they stay at the forefront of technological advancements, driving progress and delivering excellence globally. Our Culture We are committed to a professional and supportive environment with a strong focus on work-life balance. Our diverse workplace fosters creativity and innovation while promoting a healthy gender balance. Why you should join us Working at Enigmasoft Technologies is rewarding! Join us to grow, develop, and be part of an incredible journey where you can take on roles beyond a job description. 6. HOW TO APPLY Interested candidates can apply online at: https://enigma.keka.com/careersor https://enigma.keka.com/careersorr share their profile at: mailto:hr@enigma-tech.io Visit us at: http://enigma-tech.io

We are seeking a passionate and knowledgeable Electronics Engineering Faculty member to join our academic team. The ideal candidate will be responsible for teaching undergraduate and/or postgraduate courses, mentoring students, conducting research, and contributing to the continuous improvement of the curriculum and academic activities. Key Responsibilities: Deliver lectures and practical sessions in core Electronics Engineering subjects such as Analog & Digital Electronics, Microprocessors, Embedded Systems, VLSI, Communication Systems, Control Systems, etc. Develop and update course content, teaching materials, and laboratory experiments. Guide students on academic projects, internships, and research work. Conduct internal assessments, prepare question papers, evaluate answer scripts, and maintain student records. Engage in academic research and contribute to publications in reputed journals/conferences. Participate in departmental meetings, faculty development programs, and institutional activities. Provide academic counseling and career guidance to students. Qualifications: Educational Qualification: M.Tech/M.E. or Ph.D. in Electronics/Electronics & Communication/Electrical & Electronics Engineering or a related field from a recognized institution. Experience: Minimum 1–3 years of teaching or relevant industry experience (freshers with strong academic backgrounds may also be considered). Strong communication skills and a passion for teaching. Familiarity with modern teaching techniques and tools including online learning platforms. Preferred Skills: Expertise in simulation tools such as MATLAB, Multisim, Proteus, etc. Experience with microcontroller programming (e.g., Arduino, PIC, ARM). Published research papers or participation in academic conferences. Ability to contribute to interdisciplinary projects and curriculum development.