7992 Simulation Jobs - Page 19

Job Requirements Key Responsibilities: Implement, validate, integrate and deploy robust perception solutions with sensor fusion for autonomous vehicles using LiDAR, Camera, Radar and GNSS sensors. Elicitation of system requirements to derive ODD and KPI goals and instructions to capture datasets for training, validation and testing. Develop and maintain intrinsic and extrinsic sensor calibration workflows Build pre-processing and post-processing filters to clean and refine raw sensor data for downstream perception modules. Optimize perception algorithms for real-world deployment, balancing accuracy, latency, and computational performance on embedded systems. Test, validate, and fine-tune perception modules independently to handle edge cases, unusual driving conditions, and rare corner scenarios. Independently design experiments, debug challenging issues, and verify solutions in simulation, test bench and on-vehicle tests. Develop robust, production-ready C++ and Python code and integrate it into production pipelines Collaborate with cross-functional teams to ensure smooth integration of perception, calibration, and localization functions with planning and control sub-systems. Work Experience Proven experience developing perception algorithms for autonomous vehicles or robotics covering object detection, semantic segmentation, tracking and localization using classic methods (e. g. RANSAC, Euclidean clustering, Occupancy Grid Mapping) and deep learning models (e. g. PointNet++, PointPillars) for Lidar point clouds and radar scans. Hands on knowledge in sensor fusion techniques (Kalman Filters, Extended Kalman Filters, Unscented Kalman Filters, Particle Filters) for combining data from LiDAR, camera, radar, and GNSS. Strong hands-on programming skills in C++ and Python. Solid understanding of LiDAR, camera, RADAR, and GNSS sensor data, their characteristics and calibration mechanisms (intrinsic and extrinsic) Knowledgeable in ROS2 software stack and Docker Compose tool for integration and deployment of perception algorithms. Experience in implementing computational principles effectively using libraries like Eigen, Boost, GeographicLib etc. Familiarity with object detection models (e. g. , YOLO, Faster R-CNN, SSD) and point cloud libraries (PCL). Good understanding of real-time system constraints and optimization trade-offs for product-level deployment. Ability to think independently, handle unusual edge conditions, and fine-tune algorithms for real-world robustness. Excellent debugging and problem-solving skills. Nice to Have: Familiarity with SLAM, visual-inertial localization, or GNSS-INS integration. Knowledge of parallel computing (CUDA, OpenCL, OpenMP) for real-time acceleration. Prior experience with automotive-grade software development practices.

Description The Electrical design (Solar BESS) engineer will assist the project managers and lead to conduct various studies using tools RatedPower, Pivvot, PVsyst, ArcGIS, Global mapper, PVcase, BESS design etc. This role will be responsible for Simulations performed on mentioned tools and reports preparation for given generation capacity of potential sites on basis of proposed design configuration. Key responsibilities will include: Data validation: Assist Lead in validation of input data for a site or portfolio and planning of deliverables along with educating the supporting team members on technical parameters and any deviation from the standard process. Reporting any discrepancies in the inputs to project managers and leads to getting right information of assigned task / job, alternatively, proposing solutions as per industry standards and practices. Simulations on tool: Responsible for running the simulation for sites / project and preparation of reports alongside maintaining the desired quality. Solving problems on assigned task and identifying any discrepancies or diversions from standard approach and providing alternate solution to it. Task management: Plays an important role in managing and switching among various solar / renewable portfolios depending upon workload and requirements from regional offices. Managing and guiding the team to deliver high priority assignments. Updating project tracker and monitoring the schedule for deliverables. Leadership: Mentor and train less experienced staff on technical aspects of projects and the industry; serve as a recognized in-house leader in solar generation planning and evaluation; support company initiatives. Other duties as assigned. Qualifications Bachelor of Technology in Electrical engineering or related degree from an accredited program. Minimum 5 years in Engineering, of related experience associated with Solar BESS plant operations, planning, or consulting. Project experience with solar system configuration such as tracker-based system and fixed system along with integration of BESS, design of BESS & knowledge of relevant regulations, optimization of combined system using GCR & single axis tracker mechanism, Inverter selection and collection network design, and understanding of meteo data for solar system. Knowledge in standard engineering, construction, and operation techniques, principles, and procedures associated with solar BESS generation facilities. Technical knowledge in BESS reactive power assessment & layout generation using AutoCAD or similar drafting tool will be an added advantage. Strong attention to detail, facilitation, team building, collaboration, organization and problem-solving skills. Ability to work methodically and analytically in a quantitative problem-solving environment. Demonstrated leadership skills. Proven ability to lead, educate, and train a team of engineers. Ability to independently solve difficult problems that require adaptation and modification of standard techniques, procedures, and criteria. Excellent written and oral communications skills. Demonstrated critical thinking skills. Ability to perform under pressure and meet tight deadlines. Ability to manage multiple projects concurrently, including identification of critical path items to ensure deliverable deadlines are met. Ability to focus on the big picture to effectively and efficiently provide services that meet client needs, while also having the ability to identify and analyze details that are critical to project outcomes. Willingness to learn new service offerings as client needs and the market requires changes to the service offerings provided by our group. Proficient in Microsoft Office Suite (Word, Excel, PPT). Job Engineering Primary Location India-Maharashtra-Mumbai Schedule: Full-time Travel: No Req ID: 252485 Job Hire Type Experienced Not Applicable #BMI N/A

Key Responsibilities: Design & Engineering Leadership: Lead the electrical design for data center projects, including power distribution, UPS systems, switchgear, and backup power solutions. Develop detailed electrical schematics, single-line diagrams, and load calculations tailored to Vertiv s data center infrastructure solutions. Integrate Vertiv products, such as Liebert, NetSure, and Avocent, into comprehensive power distribution designs. Technical Consultation & Client Interface: Serve as the primary technical consultant for clients, interpreting project specifications and aligning electrical designs with client needs. Collaborate with sales and project management teams to provide technical support during proposal development and design reviews. Coordinate with architects, structural engineers, and other stakeholders to align electrical systems with overall project scope. Compliance & Quality Assurance: Ensure all electrical systems comply with NEC, IEEE, NFPA, and other relevant standards, as well as Vertiv s internal guidelines. Conduct design reviews, inspections, and commissioning tests to verify system integrity and operational readiness. Risk Management & Contingency Planning: Identify potential risks related to electrical infrastructure, including power failures, thermal overloads, and grounding issues. Develop and implement contingency plans to mitigate risks and ensure continuous power availability. Documentation & Reporting: Create comprehensive documentation, including technical specifications, test plans, as-built drawings, and maintenance procedures. Provide technical reports and recommendations to senior management on design optimization and risk mitigation. Training & Knowledge Transfer: Conduct training for engineering teams on Vertiv s electrical solutions and best practices for data center design and build. Mentor junior engineers, fostering a culture of continuous improvement and innovation. Qualifications and Requirements: Bachelor s degree in Electrical Engineering or related field; Master s preferred. 8+ years of experience in electrical design and build for data centers, with a focus on critical power systems. Extensive knowledge of Vertiv power solutions (e. g. , Liebert, NetSure, Avocent) and their integration in large-scale data centers. Proficiency in AutoCAD, Revit, ETAP, and other design and simulation software. Certifications such as PE, CDCP, or Vertiv-specific training (e. g. , Liebert power systems) are highly desirable. Strong project management skills, with the ability to manage multiple projects simultaneously. Exceptional problem-solving and analytical abilities, with a focus on risk management and operational efficiency.

Responsibilities & Key Deliverables The Senior Engineer - CFD will play a pivotal role in our team at Mahindra & Mahindra Ltd, primarily engaging with various stakeholders such as the HVAC Centre of Excellence (CoE), Power Train Integration CoE, Power Train CoE, and the Vehicle Development team. Your expertise will significantly contribute to the advancement of passenger car projects by delivering top-notch simulations and analyses that enhance vehicle performance and design. Your key responsibilities will include: Possessing a solid understanding of the working principles of automobiles. Applying fundamental concepts in Fluid Mechanics, Heat Transfer, and Computational Fluid Dynamics. Conducting finite volume modelling for systems including Full Cabin, Engine, and other critical components. Expertly assigning boundary conditions and material properties to components to ensure accurate simulations. Differentiating between steady and transient simulations while selecting appropriate modes of heat transfer for each scenario. Implementing boundary conditions necessary for both steady and transient analyses. Executing CFD simulations for various components such as Pressure drops, Flow distribution, Intake and Exhaust Manifolds, and more, while performing conjugate heat transfer analysis as needed. Demonstrating proficiency in post-processing results and preparing comprehensive reports for presentation to the design team. Advising on design adjustments to meet acceptance criteria based on analytical results while considering manufacturing and packaging constraints. Being knowledgeable about testing Full Vehicle systems and understanding instrumentation for testing procedures. Correlating CFD results with physical test findings to validate simulation accuracy. Moreover, you will be expected to provide insights and recommendations that will drive improvements in design and engineering practices, ensuring that we meet both internal standards and customer expectations. Experience Applicants should have a robust hands-on experience of 2-3 years in Automotive CFD Simulation , particularly utilizing tools such as Ansa and Ansys Fluent . Your practical experience in executing and managing complex simulations will enable you to contribute effectively to the technical development of our projects. A proven track record of producing high-quality simulation outcomes and presenting actionable recommendations based on analysis will be crucial. Furthermore, experience in validating CFD results against physical testing scenarios will be highly regarded, showcasing your ability to bridge theoretical knowledge with real-world applications Industry Preferred We are specifically interested in candidates with a background in the Automotive industry , particularly those who have thrived in fast-paced environments focused on vehicle design and development. Familiarity with industry standards and practices regarding vehicle performance and CFD simulations will be highly advantageous, enabling you to integrate seamlessly into our team. We value diverse experiences and encourage applications from candidates who have demonstrated innovation and excellence in automotive engineering contexts, contributing significantly to the projects they have participated in Qualifications Qualifications for this position include: A Bachelors degree in Mechanical Engineering with a minimum first-class distinction, which establishes a solid foundation in relevant engineering principles. A Masters degree (e. g. , M. Tech or M. E. ) in Heat Transfer or Fluid Mechanics , preferably from prestigious institutes such as IITs, which further enhances your theoretical and practical prowess in this domain. A comprehensive understanding of thermal and fluid dynamics principles as they pertain to the automotive industry, equipping you to tackle complex engineering challenges. This educational background is essential, enabling you to engage effectively in innovative engineering solutions and contribute to advancing our projects in the automotive field. General Requirements The successful candidate will exhibit: Exceptional communication skills : Demonstrating clarity and conciseness in discussing intricate results with cross-functional teams is essential. The capability to synthesize and effectively report findings that contribute meaningful insights to ongoing projects. A strong sense of teamwork : Actively embracing collaboration while promoting collective success across teams. Adherence to established processes : Consistently upholding high standards through diligent work practices. A quick aptitude for learning new tools and technologies relevant to CFD and automotive design, fostering continuous professional growth. Effective planning and execution skills : Adept at managing multiple projects and adhering to deadlines efficiently.

Job Description Summary Developing & implementing advanced technology based PC Drive Controls solutions with accountability & collaborative engineering while dealing with ambiguity & uncertainty. This role requires in addition to closely interacting with internal & external customers strong inclusive team player with outcome focus & willing to work in Agile methodology of execution. Job Description Roles and Responsibilities Develop application layer software for Drive controls for GE Power Conversion drives Define the application requirements architecture specification and/or design and validation of inverter drive systems and auxiliary control architectures. Support integration of components with controllers onto Drives for various domains like O&G Power Systems. Metal and Marine and resolution of electric drives SW reliability issues. Support the evaluation and conceptualization of new electric drives control technology and applications. Execute the design analysis or evaluation of assigned projects using sound engineering principles and adhering to business standards practices procedures and product / program requirements Document technical data generated by the assigned project consistent with engineering policies and procedures Provide timely communications on significant issues or developments Participate on teams assigned to address organizational initiatives and generic issues Participate as a presenter or reviewer in technical and program reviews Assure proper documentation of technical data generated for the assigned projects and/or tasks consistent with engineering policies and procedures Required Qualifications Masters degree in Power Electronics /Drives and Controls with a 1-2 years engineering experience Drive Controls Engineering. Good understanding of C C++ Matlab and Simulink . Ability to troubleshoot and identify coding structures to mitigate latency performance and maintainability amongst other software engineers on the team. Ability and willingness to work "hands-on" in test labs and Customer sites Desired Characteristics Drive control and PWM techniques MATLAB circuit simulation and Drive control Software Experience in software development & qualification for process industry Experience with system level validation testing Strong technical aptitude including applicable engineering tools and systems Solid oral and written communication skills Strong interpersonal and leadership skills

Some careers shine brighter than others. If you re looking for a career that will help you stand out, join HSBC and fulfil your potential. Whether you want a career that could take you to the top, or simply take you in an exciting new direction, HSBC offers opportunities, support and rewards that will take you further. HSBC is one of the largest banking and financial services organisations in the world, with operations in 64 countries and territories. We aim to be where the growth is, enabling businesses to thrive and economies to prosper, and, ultimately, helping people to fulfil their hopes and realise their ambitions. We are currently seeking an experienced professional to join our team in the role of Consultant Specialist. In this role, you will: Responsible to develop and deploy derivatives systems with Murex Solutions Manage activities within project delivery to the business within the agreed timeframes, cost and levels of quality Communicate with business to identify needs and translate client requirements into specified project briefs Develop logical and innovative solutions to complex problems Ensures effective project documentation and software documentation is maintained Ensure compliance with all relevant internal control standards and external regulatory requirements Maintain up-to-date understanding of the business practices and system capabilities Requirements Minimum of 7+ years experience on Java development Core Java 1. 7 or above Solid experience with frameworks / tools Spring framework, Maven, GitHub, Jenkins, JIRA, CI related tooling SQL skills Linux (Bash / ksh scripting) Scheduler (Control-M) Understanding of XML IT Service Management (Incident / Change / Problem Management) Strong troubleshooting skills and able to present the problem clearly Highly developed reasoning and analytical skills Good communication skills Fluent in written and spoken English A highly-motivated individual with positive and proactive attitude DevOps experience and teamwork Used to work in big scale project / platform What additional skills will be good to have Banking project related experience Knowledge on financial derivatives, Treasury products, Treasury trading and front office operations Understanding of the functions of different business areas: FO, PC, Ops, Finance Worked in a global team with different cultures Experience on Murex (in particular, v3. 1) and one or more components: MxML Exchange, Datamart, Market Data, Simulation View Excel / VBA .

NVIDIA has been redefining computer graphics, PC Gaming, and accelerated computing for more than 25 years. It s a unique legacy of innovation that s motivated by phenomenal technology and outstanding people. Today, we are tapping into the unlimited potential of AI to define the next era of computing. An era in which our GPU acts as the brains of computers, robots, and self-driving cars that can understand the world. Doing what s never been done before takes vision, innovation, and the world s best talent. As an NVIDIAN, you ll be immersed in a diverse, encouraging environment where everyone is inspired to do their best work. The HWPM Team at NVIDIA is seeking an excellent ASIC Verification Engineer to drive high-quality, robust verification of system-level IP across unit, subsystem, and SoC levels. This role is ideal for someone passionate about ground-breaking hardware, sophisticated verification methodologies, and crafting the future of computing. Come join the team and see how you can make a lasting impact on the world. What You ll Be Doing: Play a key role in the Hardware Performance Monitor (HWPM) team, helping define and develop system-level RTL and performance measurement methodologies for NVIDIA s industry-leading SoCs and GPUs. Develop comprehensive test plans, implement tests, and apply robust verification strategies to validate microarchitecture and design functionality. Design and implement reusable, scalable testbenches and testbench components using System Verilog and UVM. Collaborate with architects, RTL designers, and software engineers to drive feature completeness, performance visibility, and verification closure. What we need to see: M. Tech. (or equivalent) in VLSI or Electronics Engineering OR B. Tech with 2+ years of experience in a similar domain Hands-on experience in unit and/or system level verification Ability to contribute to testbench development and maintenance, preferably using System Verilog and standard methodologies Proficiency in Python or industry-standard scripting languages for automation and test development Proven debugging fundamentals ability to read waveforms, analyze logs, and isolate issues effectively Familiarity with industry-standard tools such as VCS, Xcelium, Verdi, or similar simulation/debug environments Good understanding of RTL design concepts and experience working with Verilog or SystemVerilog Experience with UVM (Universal Verification Methodology) is a strong plus Clear communication skills and collaborative attitude, with ability to work alongside design, DV, and automation teams Widely considered to be one of the technology world s most desirable employers, NVIDIA offers highly competitive salaries and a comprehensive benefits package. Also, e have some of the most forward-thinking and hardworking people in the world working for us and, due to unprecedented growth, our outstanding engineering teams are growing fast. If you are creative, curious, and motivated with a real passion for technology, we want to hear from you! #LI-Hybrid

NVIDIA System-On-Chip (SOC) group is hiring for a Design Engineer! The complexity of the chips we build has increased manifold over the years. We are now packing tens of billions of transistors in a chip to meet the growing computing demand. We are looking for a top ASIC Design Engineer. In this role, you should have real passion for RTL design implementation and methodologies that enable high quality system-level IP design. What youll be doing: Be an integral part of the team defining and developing system-level RTL and methodologies to measure performance on the industrys leading GPUs/SOCs. Design and implement RTL features - work through the entire design cycle for SOC. Run and debug RTL checks to ensure design quality (e. g. CDC, RDC, Lint, Synthesis, Logic-Equivalence and more) Define, develop, and automate flows and methodologies to efficiently build and support a system-level IP Work with architects, designers, verification and SW engineers to accomplish your tasks. What we need to see: B. Tech or M. Tech in Electronics or Computer Engineering. 2+ years of relevant industry experience. Experience in RTL design (Verilog), System-On-Chip design/implementation flow, and design automation. Good understanding of SOC architecture (e. g. , CDC, multiple-power domains, performance analysis, latency, and data flow). Strong coding skills in Perl, Python or other industry-standard scripting languages. Excellent debugging and analytical skills. Exposure to design and verification tools (dc_shell or equivalent synthesis tools, VCS or equivalent simulation tools, debug tools like Debussy, GDB). Exposure to AI tools is a plus Great communication and collaboration skills to interact within the team and with cross functional teams NVIDIA is widely considered one of the technology world s most desirable employers. We employ some of the most forward-thinking and innovative people in the world. Are you passionate about joining our life work to amplify human imagination and intelligenceIf you are creative, collaborative, and have real passion for design, methodology, and automation, we want to hear from you! #LI-Hybrid

NVIDIA System-On-Chip (SOC) group is hiring for a Senior Design Engineer! The complexity of the chips we build has increased manifold over the years. We are now packing tens of billions of transistors in a chip to meet the growing computing demand. We are looking for a top ASIC Design Engineer. In this role, you should have real passion for RTL design implementation and methodologies that enable high quality system-level IP design. What youll be doing: Be an integral part of the team defining and developing system-level RTL and methodologies to measure performance on the industrys leading GPUs/SOCs. Design and implement RTL features - work through the entire design cycle for SOC. Run and debug RTL checks to ensure design quality (e. g. CDC, RDC, Lint, Synthesis, Logic-Equivalence and more) Define, develop, and automate flows and methodologies to efficiently build and support a system-level IP Work with architects, designers, verification and SW engineers to accomplish your tasks. What we need to see: B. Tech or M. Tech in Electronics or Computer Engineering. 5+ years of relevant industry experience. Experience in RTL design (Verilog), System-On-Chip design/implementation flow, and design automation. Good understanding of SOC architecture (e. g. , CDC, multiple-power domains, performance analysis, latency, and data flow). Strong coding skills in Perl, Python or other industry-standard scripting languages. Excellent debugging and analytical skills. Exposure to design and verification tools (dc_shell or equivalent synthesis tools, VCS or equivalent simulation tools, debug tools like Debussy, GDB). Great communication and collaboration skills to interact within the team and with cross functional teams. Exposure to AI tools is a plus NVIDIA is widely considered one of the technology world s most desirable employers. We employ some of the most forward-thinking and innovative people in the world. Are you passionate about joining our life s work to amplify human imagination and intelligenceIf you are creative, collaborative, and have real passion for design, methodology, and automation, we want to hear from you! #LI-Hybrid

Educational Requirements Master Of Engineering,Master Of Technology,Bachelor of Engineering,Bachelor Of Technology Service Line Engineering Services Responsibilities Join our core R&D Automotive Engineering Team for our marquee Swedish Account- Polestar!Infosys is hiring core Automotive R&D professionals as part of a dedicated Offshore Delivery Center being setup for Sweden’s marquee EV brand ‘Polestar’ at our Electronics City, Bangalore Campus. This is an opportunity to be part of cutting-edge automotive software projects, working with passionate global teams tackling real-world Automotive and next-generation Electric Mobility Challenges. If such an opportunity excites you, apply for the job opening below - Design and develop automated test scripts and tools for test rigs Strong programming skills in languages such as Python, Java, or C++ Experience of test automation frameworks (e.g. Robot, Pytest) Collaborate with development teams to identify test cases and requirements for automation Implement and execute automated/manual tests, analyzing and reporting results Troubleshoot and resolve issues with automated/manual tests and test infrastructure Participate in issue reviews and contribute to the development of high-quality software Work with other members of the test team to maintain and improve the automated testing infrastructure Help maintain and improve the automated/manual testing infrastructure Develop and maintain test reports Keep up to date with industry trends and best practices in test automation and automotive software developmentIf you are passionate about cars and cutting-edge technologies, committed to delivering high quality software and, someone with strong analytical and problem-solving skills, then this is the right job for you! Technical and Professional Requirements: Experienced in manual and test automation Familiarity with automotive software and systems and vehicle networks (CAN, LIN, FlexRay, Ethernet) Experience with HIL (Hardware-in-the-Loop) testing and simulation rigs Experience from SystemWeaver requirement management tool from Systemite is beneficial. Excellent communication and collaboration skills, with the ability to work effectively in a team environment Experience with Agile development methodologies Preferred Skills: Domain-Automotive-Engine / Power Train Domain-Automotive-Connected Car Domain-Internet of Things (IOT)-Automotive-Connected Car Domain-Automotive-Electric Vehicles (EVs)-connected cars

Job Title Manager - 1 (Production-Sterile) Business Unit Sun Global Operations Job Grade G10 Location : Dewas SGO At Sun Pharma, we commit to helping you “Create your own sunshine”— by fostering an environment where you grow at every step, take charge of your journey and thrive in a supportive community. Are You Ready to Create Your Own Sunshine? As you enter the Sun Pharma world, you’ll find yourself becoming ‘Better every day’ through continuous progress. Exhibit self-drive as you ‘Take charge’ and lead with confidence. Additionally, demonstrate a collaborative spirit, knowing that we ‘Thrive together’ and support each other’s journeys.” Key Responsibilities To ensure contamination control are available and followed at site as per Contamination Control Strategy (CCS) and respective procedures. Handling of QMS activities (OOT/OOS/Market complaint/Investigation/Deviation). To review & approve the SOPs, Validation protocols/reports, specifications, manufacturing instruction relating to production & ensures their implementation. To implement the recommendation of internal/external audits outcome. To plan the activities of the department as per weekly / monthly delivery schedule. To meet the production schedule both in quantity & quality. To ensure the effective control on usage of men, machine, & material in the department. To Co-ordinate the training activities of employees of Penem SGO as a DTC. To organise & implement the on-job training activities in the department & ensure training of all team members of the department. To ensure the hygiene & maintenance of department, system & equipment are in neat & tidy condition at all time. To control the wastages during operations. To do counselling & grievance handling of the subordinates. To review & initiate the CAPA deviation & change control as required. To ensure that the finished products are produced & stored according to appropriate documentation & meet timely deliveries as per production schedule. To ensure the required initial & continuous training is being carrying out for all the employees. To ensure timely completion of validation/qualification activities for aseptic process simulation (Media Fill), equipment’s & systems as per approved procedure. To review the Batch Production Record (FOMI) / POPI). To ensure completion of SAP Transaction on time. To review & approve for Master Batch Manufacturing / Packing Record. To follow & implement the current Good Manufacturing Practices, EHS practices and SOP during work. To manufacture and fill the sterile dry powder injectable batches as per production plan. To ensure completion of training for workman and self within defined time. To check and verify the transfer of raw material from R.M. staging to process area. Issuance of raw material and packaging material from block store to process area as per P.O. and updates the stocks in SAP. To ensure online recording data. To complete the documentation of the critical, controlled area, garment area and Water system on time. Any other responsibility / Work activity that may be assigned from time to time. To maintain Harmony relationship with peers, seniors at work place and ensure the win - win situation for resolution of issues. Travel Estimate NA Job Requirements Educational Qualification B.Pharma / M.Pharm Experience Tenure : 10+ Years (in Sterile mfg. plants) Your Success Matters to Us At Sun Pharma, your success and well-being are our top priorities! We provide robust benefits and opportunities to foster personal and professional growth. Join us at Sun Pharma, where every day is an opportunity to grow, collaborate, and make a lasting impact. Let’s create a brighter future together! Disclaimer: The preceding job description has been designed to indicate the general nature and level of work performed by employee within this classification. It is not designed to contain or be interpreted as a comprehensive inventory of all duties, responsibilities, and qualifications required of employees as assigned to this job. Nothing herein shall preclude the employer from changing these duties from time to time and assigning comparable duties or other duties commensurate with the experience and background of incumbent(s).

We are seeking highly motivated individuals with a BS, MS, or PhD degree in Computer Science, Computer Engineering/ECE, ready to handle the challenging problems in future technologies and designs. We are also looking for candidates with Strong C/C++background to lead our leading-edge algorithmswithin our EDA solutions to increase our design team’s productivity and chip quality and performance. Our dynamic global team is looking to enlist enthusiastic professionals to join world-class hardware design teams responsible for developing the most challenging and complex systems in the world. We are seeking energetic, highly motivated individuals willing to go the extra mile with the aim of helping the overall IBM development team. Strong interpersonal skills are needed to coordinate deliverables and requirements from several areas within and outside of the organization.There are many opportunities to gain and utilize a deep understanding of future issues and provide input towards decisions affecting system development, logical and physical design as well as sophisticated methodology directions. Individuals who are chosen to become a part of our world class development teams will be helping advance IBM’s leadership in developing the highest performing computers and changing hardware solutions. Do you want to be an IBMerCome THINK with us! Required education Bachelor's Degree Preferred education Master's Degree Required technical and professional expertise 4+ years of IT experience Strong C/C++programming skills in a Unix/Linux environment is a must. VLSI knowledge, Knowledge in front end simulation tool development isadditional plus. Great scripting skills – Perl / Python/Shell Proven problem-solving skills and the ability to work in a team environment are a must Preferred technical and professional experience Simulation tool development, Front end verification , VLSI knowledge, VHDL/Verilog, computer architecture

We are part of a world-class product development organization that pioneers industry-leading hardware designs for IBM POWER Systems servers as well as Storage, Quantum, and IBM Research. Within this organization, the IBM mechanical design team is seeking a professional with experience in Finite Element Analysis (FEA) modeling to complement the design team in designing next generation computers. Challenges of high performance and high reliability server solutions include high density designs with complex system requirements that require creative solutions from our mechanical design team to optimize system designs. The candidate will work in a multi-functional environment where the requirements of thermal, acoustics, electro-magnetic-compatibility (EMC), structural integrity, safety, industrial design, cost, performance, and functionality must all be satisfied to deliver a final solution. Working with a focused team, the candidate will develop the product design from concept through product release. Primary responsibilities will be to specify IBM Appliance product configurations composed of compute servers, storage drawers, networking switches, and cabling to enable worldwide fulfillment and shipping to external clients. Required education Bachelor's Degree Preferred education Master's Degree Required technical and professional expertise 1.Work autonomously and deliver FEA models and simulations on schedule. 2.Shall work independently on structure design of Sheetmetal/Plastic and Diecast parts 3.Create and run simulations on various components and systems using ANSYS software to model and predict behavior under various loads, conditions, and stresses. 4.Document and communicate modeling results to the mechanical design team along with feedback on necessary changes to optimize designs. 5.Working with multi-disciplinary engineering team to collaborate on development and definition of complex rack level integrated products with multiple compute, storage, and networking systems components. 6.Interface with development, manufacturing, and compliance teams to enable fulfillment of complex rack level integrated products out of IBM manufacturing division. 7.Material selection and parts design optimization for functionality, cost, and manufacturability 8.Identify areas for design and process improvement. 9.Work with Cross functional teams to improve designs Preferred technical and professional experience 1.Work autonomously and deliver FEA models and simulations on schedule. 2.Shall work independently on structure design of Sheetmetal/Plastic and Diecast parts 3.Create and run simulations on various components and systems using ANSYS software to model and predict behavior under various loads, conditions, and stresses. 4.Document and communicate modeling results to the mechanical design team along with feedback on necessary changes to optimize designs. 5.Working with multi-disciplinary engineering team to collaborate on development and definition of complex rack level integrated products with multiple compute, storage, and networking systems components. 6.Interface with development, manufacturing, and compliance teams to enable fulfillment of complex rack level integrated products out of IBM manufacturing division. 7.Material selection and parts design optimization for functionality, cost, and manufacturability 8.Identify areas for design and process improvement. 9.Work with Cross functional teams to improve designs

Your Role and Responsibilities Lead the unit level pre-silicon functional & performance verification the Instruction Sequencing Unit for our next -generation IBM POWER processor core systems offering. Architect and enhance the existing verification environment for ISU which covers the Issue queues, Register Renaming for Out of Order Execution, Issue instructions to Execution Pipelines, Reordering Buffers for completion of the high performance processor CPU. Develop verification test plan for both functional and performance verification including the estimation for coverage closure. Support higher level core/system simulation environment. Participate in post silicon lab bring-up and validation of the Hardware. Lead , guide ,mentor a team of engineers and represent them at global forums. Thoroughly document verification environment details, providing comprehensive insights for future reference and continuous improvement. Effectively Communicate progress ,potential challenges encountered and milestones achieved to stake holders and team members. Required education Bachelor's Degree Preferred education Master's Degree Required technical and professional expertise Required Technical and Professional Expertise 8 years or more experience in functional verification of processors, demonstrating a deep understanding of Instruction Dispatch verification. Good understanding of computer architecture, including Processor core design specifications, with expertise in verifying Load Store unit of any CPU architecture. Hands on experience of implementing Issue Queues, Register renaming and forwarding, Reordering Buffer and Pipeline flush/exception handling etc. Deep expertise in Out of Order, Super Scalar, Multi-Threaded Core Architecture and ISA Experience with high frequency, instruction pipeline designs At least 1 generation of Processor Core silicon bring up experience In depth understanding of industry microprocessor designs (e.g., x86, ARM, or RISC-V processor designs) Exposure to system-level verification methodologies and techniques, ensuring holistic verification coverage across multiple levels of design Proficiency in C++, Python scripting or similar object oriented programming languages. Preferred technical and professional experience Nice to haves - Knowledge of instruction dispatch and Arithmetic units. - Knowledge of test generation tools and working with ISA reference model. - Experience with translating ISA specifications to testplan. - Knowledge of verification principles and coverage. - Understanding of Agile development processes. - Experience with DevOps design methodologies and tools.

Your Role and Responsibilities Lead the unit level pre-silicon functional & performance verification of the front end of the pipeline for our next -generation IBM POWER processor core systems offering. Architect and enhance the existing verification environment for Instruction fetch, Branch Prediction and Instruction Decode units of the high performance processor CPU. Develop verification test plan for both functional and performance verification including the estimation for coverage closure. Support higher level core/system simulation environment. Participate in post silicon lab bring-up and validation of the Hardware. Lead , guide ,mentor a team of engineers and represent them at global forums. Thoroughly document verification environment details, providing comprehensive insights for future reference and continuous improvement. Effectively Communicate progress ,potential challenges encountered and milestones achieved to stake holders and team members. Required education Bachelor's Degree Preferred education Master's Degree Required technical and professional expertise Required Technical and Professional Expertise 8 years or more experience in functional verification of processors, demonstrating a deep understanding of core units (eg. I-Cache, Instruction Fetch, Branch Prediction, Instruction Decode) Good understanding of computer architecture, including Processor core design specifications, with expertise in verifying frontend pipeline units of any CPU architecture. Hands on experience of Branch Prediction techniques. Deep expertise in Out of Order, Super Scalar, Multi-Threaded Core Architecture and ISA Experience with high frequency, instruction pipeline designs At least 1 generation of Processor Core silicon bring up experience In depth understanding of industry microprocessor designs (e.g., x86, ARM, or RISC-V processor designs) Exposure to system-level verification methodologies and techniques, ensuring holistic verification coverage across multiple levels of design Proficiency in C++, Python scripting or similar object oriented programming languages. Preferred technical and professional experience Nice to haves - Knowledge of instruction dispatch and Arithmetic unit. - Knowledge of test generation tools and working with ISA reference model. - Experience with translating ISA specifications to testplan. - Knowledge of verification principles and coverage. - Understanding of Agile development processes. - Experience with DevOps design methodologies and tools.

Job Overview We are seeking a highly skilled and experienced Lead FEA Engineer with a strong foundation in mechanical analysis and computational fluid dynamics (CFD). This role is pivotal in leading simulation-driven design and validation efforts across a wide range of engineering challenges. The ideal candidate will be responsible for executing and guiding simulations involving static, dynamic, linear, non-linear, vibration, and wind loading scenarios, supporting product development, optimization, and cross-functional innovation. Experience in electrical analysis like electro-magnetic and electrostatic is an added advantage Education: M.Tech / B.Tech – Mechanical engineering Experience: Minimum 8 to 12 Yrs Minimum 7 years’ experience in Mechanical FEA simulation of various products especially in Static/dynamic/transient simulation domain Experience in electrical/power/utility industry dealing with medium voltage protection and switchgear products A Day In The Life Interact with US clients to understand and gather project requirements. Translate physical engineering systems into accurate and efficient FEA models. Perform basic mechanical and electrical calculation and analysis techniques. Strong understanding of material assignment, boundary conditions, and meshing techniques. Post processing and reporting. Programming/scripting skills (e.g., Python, MATLAB) for automation and post-processing. Leverage model and application builder features within analysis software. What will help you thrive in this role? Lead And Execute Advanced CAE Simulations Including Static and dynamic structural analysis Linear and non-linear material behavior Modal, harmonic, and random vibration analysis Wind loading and environmental load simulations Thermal and coupled field analysis Fatigue analysis Perform CFD Simulations For Internal and external fluid flows Heat transfer Multiphase systems Conduct Simulations Involving Electromagnetic, electrostatic, and electro-thermal effects Joule heating analysis Impact and drop test scenarios using explicit dynamics Collaborate with design, manufacturing, and testing teams to validate simulation results and refine product designs. Develop and maintain simulation best practices, templates, and automation scripts. Evaluate and implement new CAE tools and technologies to enhance simulation capabilities. Document analysis procedures, results, and recommendations in detailed technical reports. Strong Knowledge Of Mechanical Engineering Concepts Solid mechanics, strength of materials Non-linear elasticity, fatigue, creep, and vibration Proficiency In FEA Fundamentals Element types, preprocessing, meshing methods, and post-processing Expertise Simulation Tools Such As ANSYS, , COMSOL, Fluent, Proficient in CAD tools such as SolidWorks or Autodesk Inventor .

Job Description WSP is currently seeking a Graduate Engineer in transportation planning and modelling to join the Canadian iCRC team in the Bengaluru office serving the Canadian private developments and public-sector markets. The Canadian Planning & Advisory group offers clients a wide range of multi-disciplinary services including transport modelling of highway intersections and signalized networks (using Synchro, Aimsum, Vissim) and regional / strategic transport systems (using Emme, VISUM, and TransCAD). Responsibilities The appointed candidate will assist senior team members in undertaking intersection analysis, traffic simulations, travel demand modelling and providing support services for the submission of traffic impact studies and transportation master plans. The successful candidate will work with experienced strategic and micro-simulation modellers across Canada who are at the cutting edge of modelling software application. Experience and knowledge of junction design and analysis, traffic softwares including (Synchro, SIDRA, HCS, Vistro), strategic modelling softwares (Emme, VISUM, Aimsun, TransCAD) and micro-simulation modelling (VISSIM) as well a good understanding of fundamental modelling techniques and traffic management techniques to enable you work effectively as part of the team. Be a core member of WSP’s Modelling/ Transport Planning team, with key focus on detail and quality; Develop reports, and presentations; Zeal to grow self and dedication towards working independently/ with minimal guidance where required; Attend and contribute in team and project meetings via Teams and Video-conferencing; Work within project constraints; such as time, budget and resource; Complete accurate timesheets by set deadline; Ensure that Health & Safety is embedded into all work practices in line with company policies; and Other duties as assigned. Qualifications Master’s degree in Transportation Planning or equivalent from an accredited university or Urban Planning degree with emphasis in transportation planning; A solid understanding of traffic engineering and traffic signal operations. Experience with transportation related software packages (i.e. Synchro, SIDRA, HCS and VISSIM ) is required; A solid understanding of Travel Demand Modelling and its applications. Experience with transportation modelling related software packages (i.e. EMME, VISUM and TransCAD) is required; Familiarity with graphic design, SharePoint, AutoCAD, Microstation, Bentley InRoads, and GIS software would be an asset; Excellent communication, presentation, proposal and report writing skills are essential; Post-graduate with 2+ years of International experience. Highly motivated and willing to take on new challenges; and Committed team player.

Job Description WSP is currently seeking an Assistant Engineer in transportation planning and modelling to join the Canadian GCC team in the Bengaluru office serving the Canadian private developments and public-sector markets. The Strategic Advisory & Planning group offers clients a wide range of multi-disciplinary services including transport modelling of highway intersections and signalized networks (using Synchro, Aimsum, Vissim) and regional / strategic transport systems (using Emme, VISUM, and TransCAD). Responsibilities The appointed candidate will assist senior team members in undertaking intersection analysis, traffic simulations, travel demand modelling and providing support services for the submission of traffic impact studies and transportation master plans. The successful candidate will work with experienced strategic and micro-simulation modellers across Canada who are at the cutting edge of modelling software application. Experience and knowledge of junction design and analysis, traffic software's including (Synchro, SIDRA, HCS, Vistro), strategic modelling software's (Emme, VISUM, Aimsun, TransCAD) and micro-simulation modelling (VISSIM) as well a good understanding of fundamental modelling techniques and traffic management techniques to enable you work effectively as part of the team. Responsibilities Be a core member of WSP’s Modelling/ Transport Planning team, with key focus on detail and quality; Develop reports, and presentations; Zeal to grow self and dedication towards working independently/ with minimal guidance where required; Attend and contribute in team and project meetings via Teams and Video-conferencing; Work within project constraints; such as time, budget and resource; Complete accurate timesheets by set deadline; Ensure that Health & Safety is embedded into all work practices in line with company policies; and Other duties as assigned. Qualifications Master’s degree in Transportation Planning or equivalent from an accredited university or Urban Planning degree with emphasis in transportation planning; A solid understanding of traffic engineering and traffic signal operations. Experience with transportation related software packages (i.e. Synchro, SIDRA, HCS and VISSIM ) is required; A solid understanding of Travel Demand Modelling and its applications. Experience with transportation modelling related software packages (i.e. EMME, VISUM and TransCAD) is required; Familiarity with graphic design, SharePoint, AutoCAD, Microstation, Bentley InRoads, and GIS software would be an asset; Excellent communication, presentation, proposal and report writing skills are essential; Post-graduate with 1 to 3 years of International experience. Highly motivated and willing to take on new challenges; and Committed team player.

About the Company A skilled Electrical Engineer is needed to lead the design, engineering, and implementation of complex electrical power infrastructure projects, including Solar PV power plants, Battery Energy Storage Systems (BESS), Substations, and Transmission Lines. The ideal candidate should possess a combination of technical expertise, project management skills, and a strong understanding of renewable energy systems and grid integration. About the Role A skilled Electrical Engineer is needed to lead the design, engineering, and implementation of complex electrical power infrastructure projects, including Solar PV power plants, Battery Energy Storage Systems (BESS), Substations, and Transmission Lines. The ideal candidate should possess a combination of technical expertise, project management skills, and a strong understanding of renewable energy systems and grid integration. Responsibilities Design and Engineering: Design electrical systems for large-scale solar PV power plants, BESS, including system architecture, single-line diagrams, and component specifications. Also, design and develop electrical substation layouts and transmission lines. Analysis and Optimization: Perform simulations and calculations to optimize system performance, conduct performance analyses of BESS components, and recommend solutions for enhancement. Compliance and Documentation: Ensure designs comply with relevant standards and regulations, prepare technical documentation, and support in obtaining permits and certifications. Preparing the technical evaluation report. Qualifications Education: A Bachelor's degree in Electrical Engineering or a related field is required; a Master's is preferred. Experience: A minimum of 15-20 years of experience in electrical engineering, focusing on Solar PV, BESS, substation, and transmission line projects. Certifications: A Professional Engineer (PE) license or relevant certifications (e.g., NABCEP, LEED, CE) are preferable. Required Skills Technical Skills: Expertise in solar PV system design, BESS design and integration, high-voltage systems, and design/simulation software (e.g., PVSyst, ETAP, AutoCAD). Soft Skills: Excellent analytical, problem-solving, and communication skills, the ability to work in teams, and strong attention to detail.

We are seeking a highly skilled Electrical Engineer to spearhead the design, engineering, and execution of advanced electrical power infrastructure projects. This includes Solar PV power plants, Battery Energy Storage Systems (BESS), substations, and transmission lines. The ideal candidate will bring a strong blend of technical proficiency, project leadership, and a deep understanding of renewable energy systems and grid integration. Job Responsibilities Design and Engineering: Design electrical systems for large-scale solar PV power plants, BESS, including system architecture, single-line diagrams, and component specifications. Also, design and develop electrical substation layouts and transmission lines. Analysis and Optimization: Perform simulations and calculations to optimize system performance, conduct performance analyses of BESS components, and recommend solutions for enhancement. Compliance and Documentation: Ensure designs comply with relevant standards and regulations, prepare technical documentation, and support in obtaining permits and certifications. Preparing the technical evaluation report. Qualifications and experience Education: A Bachelor's degree in Electrical Engineering or a related field is required; a Master's is preferred. Experience: A minimum of 15-20 years of experience in electrical engineering, focusing on Solar PV, BESS, substation, and transmission line projects. Certifications: A Professional Engineer (PE) license or relevant certifications (e.g., NABCEP, LEED, CE) are preferable. Technical Skills: Expertise in solar PV system design, BESS design and integration, high-voltage systems, and design/simulation software (e.g., PVSyst, ETAP, AutoCAD). Soft Skills: Excellent analytical, problem-solving, and communication skills, the ability to work in teams, and strong attention to detail.

Our Purpose Mastercard powers economies and empowers people in 200+ countries and territories worldwide. Together with our customers, we’re helping build a sustainable economy where everyone can prosper. We support a wide range of digital payments choices, making transactions secure, simple, smart and accessible. Our technology and innovation, partnerships and networks combine to deliver a unique set of products and services that help people, businesses and governments realize their greatest potential. Title And Summary Senior Software Engineer Overview Mastercard is a global technology company in the payments industry. Our mission is to connect and power an inclusive, digital economy that benefits everyone, everywhere by making transactions safe, simple, smart, and accessible. Using secure data and networks, partnerships and passion, our innovations and solutions help individuals, financial institutions, governments, and businesses realize their greatest potential. Our decency quotient, or DQ, drives our culture and everything we do inside and outside of our company. With connections across more than 210 countries and territories, we are building a sustainable world that unlocks priceless possibilities for all. Services within Mastercard is responsible for acquiring, engaging, and retaining customers by managing fraud and risk, enhancing cybersecurity, and improving the digital payments experience. We provide value-added services and leverage expertise, data-driven insights, and execution. About Ethoca At Ethoca, you can join a team of top business and technology innovators who are transforming the industry. We are changing the payments landscape and reinventing the way global merchants and issuers combat fraud and reduce costs. Our services allow customers to focus on what really matters - increasing sales and creating a great customer experience. Our relentless customer focus is what makes us an award-winning company. Role As a Senior Software Engineer in Test / Senior Automation Engineer, you will: Play a crucial part in helping drive Quality initiatives across the teams Adhere to enterprise quality standards, processes and tools Responsible for developing and executing test plans for a single application, independently generating test data and recognizing test environment preparation needs Participate in project-level reviews, walkthroughs and inspections, and conducts test reviews, including test plans, requirements, cases and automation Achieve maximum coverage for test automation Responsible for automation and Continuous Integration (CI). Work closely with development team to identify defects early in the cycle through requirements analysis and code reviews. You Should Apply If Bachelor/Master’s Degree in Computer Science or equivalent work experience with exposure to quality engineering processes 6-8 years of overall experience. Sound knowledge of Java, Spring, JUnit, Eclipse IDE, Rest Assured, Appium, Jbehave/Cucumber frameworks, Databases, APIs (REST/SOAP), Continuous Delivery concepts and tools such as Jenkins/Bamboo, vulnerability tools such as Sonar, Checkmarx/Fortify, etc. Good knowledge of payments domain message flows, architecture, common design patterns, ISO message protocols, simulation/emulation tools highly desirable. Experience in multiple types of coding, software development, and/or using automation frameworks; Hands on experience in writing functional and integrational test cases; Exposure in building and using automation frameworks using technologies: Serenity, Cucumber, Browserstack, Selenium, others Experience testing APIs (REST) Experience in UI testing Well versed with writing complex database queries to validate data Ability to create good acceptance and integration test automation scripts and integrate with Continuous integration (Jenkins) Successfully developed high quality test strategies and text execution, recognized test environment preparation needs Experience in building automation frameworks, acceptance and integration test automation scripts, integrating with other tools. It Would Also Be Great If you have knowledge of working on cloud technology such as Azure, AWS you have knowledge of performance and security testing (e.g. Gatling , JMeter, Blazemeter). Corporate Security Responsibility All activities involving access to Mastercard assets, information, and networks comes with an inherent risk to the organization and, therefore, it is expected that every person working for, or on behalf of, Mastercard is responsible for information security and must: Abide by Mastercard’s security policies and practices; Ensure the confidentiality and integrity of the information being accessed; Report any suspected information security violation or breach, and Complete all periodic mandatory security trainings in accordance with Mastercard’s guidelines. R-254001

Job Title Senior Electrical Engineer – STET Job Description The primary function within this role is to execute Manufacturing Engineering activities through the course of high-quality Process Verification & Validation activities. In this role you are responsible to sustain and improve processes, tools and equipment of the Manufacturing systems, to ensure predictable, reliable, stable and efficient production processes. Supporting troubleshooting activities. Catcher of new product industrialization projects and manufacturing transfers for the site. You will be responsible for driving meaningful and innovative Process Validation and suggesting in improving the process and support in Process Verification, Validation, IQ, OQ, PQ to improve quality and reduce cost, as well as performing the role of a technical lead in taking the product development through manufacturing release while transferring products from Engineering to Manufacturing and manage sustaining of different devices by following PDLM-MLD process. You are a part of A high-impact, global organization within Philips that works across all modalities – The Supplier Transfer Excellence Team (STET). STET has been established as an entrepreneurial organization that focuses on fast-paced, high-quality portfolio transfers within the Philips global supply base to mitigate risk & maximize profitability. We work directly with our cross-functional and cross-discipline partners, including marketing, clinical specialists, service personnel and R&D, to deliver solutions through the execution of PDLM, Lifecycle, and Solutions Processes, with deliveries that exceed our customers' expectations. You are responsible for Responsible for understanding the Design, test the proto parts. Conducts Concept & Feasibility studies to follow the good manufacturing practices (GMP). Ensures that there is proper documentation for the developed design and translation to production processes. Provides input for Manufacturing requirements as per required in PDLM process. Is abreast of / participates in standards identification required for designing and testing. Works to guide and perform Process Validation (PV) related tests (e.g TMV, IQ, OQ & PQ) on the shop floor. Creates Quality Control Plan and Work Instructions Oversees equipment installation and supports ramp up of specific processes at the site May execute equipment installation and supports ramp-up of specific processes at the site. Supports implementation of design changes Maintains product and company reputation by complying with country specific regulations Communicates with Suppliers, for design transfer, query solving Executes the processes and standards with embedded quality into the way of working including adherence to compliance with safety, Cost regulatory- and environmental requirements as well as local laws, Philips General Business principles and other policies. Initiates and oversees process technology development activities in the context of New Product Generation as well as product and solution technology roadmap. Ensures adherence to the applicable process for product introductions, qualifications and release Support of Regulatory agency audits and inspections in areas of responsibility. Support for control of nonconforming products (QNs/MRB), including risk assessments. Support for Process Validation protocols and reports, design/process changes (ECO/CRB) Review/leadership relating to accurate recordkeeping (GDPs) Interface with cross-functional teams to ensure compliance and timely product releases Applies lean manufacturing principles To succeed in this role, you should have the following skills and experience Completed engineering studies at university level; BE/BTech/ME/Mtech in Electronics/Electrical with 4 to 8 years of relevant industry experience Knowledge of state-of-the-art methods & tools (CAD/simulation) used in electrical design Knowledge of Digital Electronics, Analog circuits and designing Cable Harness – design and testing Knowledge of Value Addition and Value Engineering Peripheral interfaces like RS232, RS485, CAN, Ethernet and USB Ability to understand and debug problems across hardware boundaries Exposure to International Medical Quality and Regulatory Standards e.g. IEC, FDA, UL, CE, CSA, BIS etc. will be preferred Experience in the field of Medical Devices product design e.g. X-Ray, Mammography systems etc. will be added advantage Disciplined team worker, ability to work independently Ability to present ideas and to convince project team members Be structured and self-organized Excellent communication skills Team player, leadership skills and drive for results Quality mindset in design and documentation Knowledge of FDA and IEC Standards is a plus. Worked on CPLD’s and FPGA design will be added advantage Ability to understand and debug problems across hardware/software boundaries and should have knowledge of SW development (coding) /debugging on prototype hardware and changing requirements – added advantage In return, we offer you A rewarding career in Philips with attractive package. ` Extensive set of tools to drive your career, such as a personal development budget, free training and coaching Attractive collective health insurance package Opportunity to buy Philips shares and products with discount How We Work Together We believe that we are better together than apart. For our office-based teams, this means working in-person at least 3 days per week. Onsite roles require full-time presence in the company’s facilities. Field roles are most effectively done outside of the company’s main facilities, generally at the customers’ or suppliers’ locations. Why should you join Philips? Working at Philips is more than a job. It’s a calling to create a healthier society through meaningful work, focused on improving 2.5 billion lives a year by delivering innovative solutions across the health continuum. Our people experience a variety of unexpected moments when their lives and careers come together in meaningful ways. Learn more by watching this video. To find out more about what it’s like working for Philips at a personal level, visit the Working at Philips page on our career website, where you can read stories from our employee blog. Once there,you can also learn about our recruitment process, or find answers to some of the frequently asked questions.

🔧 Your Role: Join our team as a Senior Thermal Engineer, where you’ll take full responsibility for the thermal design and sizing of Shell and Tube Heat Exchangers. You will ensure alignment with process specs, international codes, and customer requirements. From pre-bid to post-bid, you’ll lead coordination across engineering teams and clients for seamless manufacturing execution. ✅ What You’ll Do: Perform complete thermal sizing and simulation of shell & tube heat exchangers Ensure compliance with international standards and customer specifications Coordinate across internal teams, disciplines, and licensors during all project phases Support bidding, design reviews, and technical documentation Liaise directly with clients during the engineering and manufacturing lifecycle 🎓 What You Bring: B.E./B.Tech in Mechanical or Chemical Engineering 7–10 years of hands-on experience in thermal design of heat exchangers Proficient in software such as HTRI, Aspen EDR, or equivalent Strong knowledge of TEMA, ASME, API standards Excellent communication and cross-functional coordination skills

Siemens EDA is a global technology leader in Electronic Design Automation software. Our software tools enable companies around the world to develop highly innovative electronic products faster and more cost-effectively. Our customers use our tools to push the boundaries of technology and physics to deliver better products in the increasingly complex world of chip, board, and system design. Questa Simulation Product It is a core R&D team working on multiple verticals of Simulation. A very energetic and enthusiastic team of motivated individuals. This role is based in Noida. But you’ll also get to visit other locations in India and globe, so you’ll need to go where this job takes you. In return, you’ll get the chance to work with teams impacting entire cities, countries, and the shape of things to come. We make real what matters! Key Responsibilities : We are looking for a highly motivated software engineer to work in the QuestaSim R&D team of the Siemens EDA Development responsibilities will include core algorithmic advances and software design/architecture. You will collaborate with a senior group of software engineers contributing to final production level quality of new components and algorithms and to build new engines and support existent code. Self-motivation, self-discipline and the ability to set personal goals and work consistently towards them in a dynamic environment will go far towards contributing to your success. Are you excited to know more about this Role ? Job Qualification: An ideal candidate should have skills below: B.Tech or M.Tech in Computer Science & Engineering (CSE), Electrical Engineering (EE), or Electronics & Communication Engineering (ECE) from a reputable engineering institution having 8 - 15 years of experience. Strong knowledge of C/C++, algorithms, and data structures. Familiarity with compiler concepts and optimizations. Experience with UNIX and/or LINUX platforms is essential. Excellent problem-solving and analytical skills. Self-motivated with the ability to work independently and guide others towards successful project completion. We are not looking for superheroes, just super minds! Having the below skills will be an added advantage: Strong understanding of basic digital electronics concepts. Familiarity with machine learning (ML) and artificial intelligence (AI) algorithms, particularly their implementation in data-driven tasks. Proficiency in hardware description languages such as Verilog, SystemVerilog, and VHDL. Experience with parallel algorithms and job distribution techniques. Exposure to simulation or formal verification methodologies is a plus. We are Siemens A collection of over 377,000 minds building the future, one day at a time in over 200 countries. We're dedicated to equality, and we encourage applications that reflect the diversity of the communities we work in. All employment decisions at Siemens are based on qualifications, merit and business need. Bring your curiosity and creativity and help us shape tomorrow! We offer a comprehensive reward package which includes a competitive basic salary, variable pay, other benefits, pension, healthcare and actively support working from home. We are an equal opportunity employer and value diversity at our company. We do not discriminate based on race, religion, color, national origin, sex, gender, gender expression, sexual orientation, age, marital status, veteran status, or disability status. Transform the everyday #DVT

Job family: Engineering Business area: Hydropower Contract location: Village Prithla, HR, IN Working location: Village Prithla Location type: Office Location / Office-based Contract type: Permanent Job description: Every day, ANDRITZ continues to deliver successful innovative solutions to our customers globally. Why are we so successful? Because we are passionate and love what we do! We are at the forefront of future engineering technologies, with solutions that ensure the success of our clients in key industries that are shaping the future of the world we live in. General Description Skills Requirement Technical Expertise: Strong understanding of control theory, automation systems, and relevant software and hardware technologies. Leadership and Communication: Excellent communication, interpersonal, and leadership skills, including the ability to collaborate effectively with cross-functional teams. Problem-Solving: Strong analytical and problem-solving skills, with the ability to identify and resolve complex technical challenges. Industry Knowledge: Knowledge of Power industry standards, regulations, and best practices. Cyber Security- Knowledge of relevant cyber security standards which are applicable in control system of power industry. Knowledge of Communication Protocols- knowledge of different industrial communication protocols like IEC 60870/IEC 61850/MODBUS etc. Knowledge of Plant Network- Configuration of two/three layer ethernet switches, configuration of firwalls/routers JOB RESPONSABILITIES AND TASKS Leadership and Management : Team Leadership: Guiding and mentoring junior engineers, providing technical support, and fostering a collaborative team environment. Project Management: Planning, scheduling, and executing control system projects within budget and on time. Technical Guidance: Providing expert technical advice and making key decisions related to control system design and implementation. Technical Responsibilities : Design and Development: Developing and implementing control system designs, including algorithms, software, and hardware. System Modeling and Simulation: Using simulation tools to analyze and validate control strategies, ensuring system stability and optimal performance. Troubleshooting and Problem-Solving: Identifying and resolving technical issues within control systems, ensuring efficient and reliable operation. Compliance and Standards: Ensuring that control systems meet relevant industry standards, regulations, and safety requirements. Specific Examples: Hydro Control Systems: Working on control systems for hydroelectric power plants, including hardware and software design. Commissioning- Leading commissioning team at site. QUALIFICATION REQUIREMENTS Education: BE(Electrical/Electronics) Experience: >10 years Languages: English, Hindi Product Know-How : Conversant with different Control system available in the market Readiness to travel to sites All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, or disability. Requisition ID: 17684