6780 Plc Jobs - Page 11

Job Description: Role: Instrument Technician Experience: 2–5 years of experience in power plants, preferably in biomass, thermal, or renewable energy facilities. Salary: 2.4 to 3 LPA Location: Phalodi, Rajasthan Notice Period: 15 days or less Job Summary: We are seeking an experienced and proactive Instrument Technician to support the maintenance and operation of instrumentation and control systems in our 8 MW biomass power plant in Phalodi. The ideal candidate will be responsible for ensuring the accurate functioning, calibration and troubleshooting of all plant instruments critical to safety, efficiency, and compliance with regulatory standards. Key Responsibilities: ∙ Install, calibrate, and maintain field instrumentation such as temperature, pressure, flow, and level sensors used in biomass combustion and steam generation processes. ∙ Monitor, troubleshoot, and repair control systems (PLC/DCS), analyzers, control valves, transmitters, and signal converters. ∙ Conduct preventive and corrective maintenance of all instrumentation and control equipment. ∙ Support the operation of biomass fuel handling systems, boilers, turbines, and ash handling through instrumentation maintenance. ∙ Work closely with operations and electrical teams during plant start-up, shutdown, and emergencies. ∙ Ensure instrumentation systems are operating within defined parameters and comply with HSE guidelines. ∙ Maintain documentation, including instrument loop diagrams, calibration reports, and maintenance records. ∙ Assist in the testing and commissioning of new instrumentation systems and equipment modifications. ∙ Use test and calibration tools like HART communicators, loop calibrators, multimeters, and IR thermometers. ∙ Participate in the development and improvement of maintenance practices and spare parts planning. Qualifications & Experience: ∙ ITI/Diploma in Instrumentation, Electronics, or related field. ∙ Minimum of 3–5 years of experience in power plants, preferably in biomass, thermal, or renewable energy facilities. ∙ Familiarity with biomass plant systems such as combustion controls, flue gas analysers, and steam pressure control loops. ∙ Hands-on experience with PLC/DCS systems (Siemens, Allen Bradley, or equivalent). ∙ Knowledge of safety standards and environmental compliance relevant to biomass power generation. Preferred Skills: ∙ Experience working in small- to mid-sized biomass or thermal power plants. ∙ Ability to read and interpret P&IDs, loop drawings, and electrical schematics. ∙ Strong troubleshooting and problem-solving skills. ∙ Good team coordination and communication abilities. ∙ Knowledge of CMMS software is a plus. Physical Requirements: ∙ Must be able to work in high-temperature industrial environments. ∙ Physically fit to climb ladders, access equipment platforms, and lift equipment/tools. ∙ Willingness to work in shifts and be available for emergency maintenance calls.

Hiring Alert!! Greetings from Smartmeters Technologies Private Limited! Designation: Hardware Design Engineer Work Location: Prahladnagar, Ahmedabad Job Summary: We are seeking a skilled and motivated Hardware Engineer to join our smart metering team. The ideal candidate will be responsible for designing, developing, and testing electronic hardware for smart electricity meters, ensuring compliance with industry standards, and supporting production and field deployment. ________________________________________ Key Responsibilities: • Design and development of hardware architecture for smart meters (single-phase and three-phase). • Selection of microcontrollers, analog/digital components, and communication modules (RF, NB-IoT, 4G, PLC, etc.). • Schematic capture and PCB layout design using tools like Altium, OrCAD, or Eagle. • Perform signal integrity analysis, power optimization, and EMI/EMC compliance testing. • Work with firmware and software teams for system integration and bring-up. • Perform hardware validation, functional testing, and debugging using lab equipment (oscilloscopes, multimeters, logic analyzers, etc.). • Ensure compliance with IS16444, IEC standards, and relevant metering regulations. • Support field trials, issue debugging, and provide technical documentation. • Coordinate with suppliers, EMS partners, and certification bodies during the product lifecycle. ________________________________________ Required Skills and Qualifications: • Bachelor’s or Master’s degree in Electronics/Electrical/Electronics & Communication Engineering. • 3–8 years of experience in hardware design, preferably in energy metering. • Strong understanding of analog/digital circuits, power supplies, and microcontroller interfaces (SPI, I2C, UART). • Experience with metrology ICs (e.g., Analog Devices, TI, Cirrus Logic, etc.). • Familiarity with smart metering protocols (DLMS/COSEM, MODBUS) and communication technologies. • Knowledge of EMI/EMC, safety compliance, and environmental testing standards. • Proficient in PCB design and simulation tools. ________________________________________ Preferred Skills (Bonus): • Experience with IS13779, IS16444, and IEC62053 series standards. • Exposure to secure element integration and tamper detection hardware. • Understanding of manufacturing processes, DFM/DFT. • Prior experience in utility or energy sector projects. Interested candidates please share your resume at recruit@gsecl.co.in or WhatsApp on +91 81538 53679

Key Responsibilities: Design, develop, and test electrical systems and components. Create technical drawings, specifications, and documentation Ensure compliance with industry safety standards and regulations. Collaborate with cross-functional teams including mechanical engineers, project managers, and technicians. Troubleshoot and resolve electrical issues in existing systems. Supervise maintenance of electrical systems. Use software tools such as AutoCAD, MATLAB, or ETAP for design and simulation. Prepare reports and present findings to stakeholders. Apply basic knowledge of PLCs for automation and control systems. Required Qualifications: Bachelor’s degree in Electrical Engineering or a related field. Basic understanding of PLC programming and applications. Strong knowledge of electrical codes and safety standards. Job Types: Full-time, Permanent Pay: Up to ₹35,000.00 per month Benefits: Food provided Health insurance Leave encashment Life insurance Provident Fund Schedule: Rotational shift Supplemental Pay: Yearly bonus Ability to commute/relocate: Pithampur, Madhya Pradesh: Reliably commute or planning to relocate before starting work (Preferred) Education: Diploma (Preferred) Experience: Electrical engineering: 1 year (Preferred) Work Location: In person

Dear All, Greetings of the day! We are pleased to inform you that Kahan Controls Pvt. Ltd. is hiring for the position of Sales Engineer at our Delhi location . Position Details: Role: Sales Engineer Location: Delhi Experience Required: 1 to 3 years (Freshers are not eligible) Preferred Gender: Male Qualification: B.E. in EEE, ECE, E&I, or Mechatronics Industry Experience: Candidates must have prior experience in Industrial Automation products. Key Skills Required: HVAC and Refrigeration Controllers Industrial Automation Solutions Variable Frequency Drives (VFD) HMI (Human Machine Interface) Temperature Microcontrollers SCADA, PLC Systems Internet of Things (IoT) Transmitters Interested candidates may send their updated resumes to: jobs@kahancontrols.com Job Type: Full-time Pay: ₹22,000.00 - ₹35,000.00 per month

About Business JOB DESCRIPTION Adani Group: Adani Group is a diversified organisation in India comprising 10 publicly traded companies. It has created a world-class logistics and utility infrastructure portfolio that has a pan-India presence. Adani Group is headquartered in Ahmedabad, in the state of Gujarat, India. Over the years, Adani Group has positioned itself to be the market leader in its logistics and energy businesses focusing on large-scale infrastructure development in India with O & M practices benchmarked to global standards. With four IG-rated businesses, it is the only Infrastructure Investment Grade issuer in India. Adani Power Limited (APL): Adani Power Limited (APL), a part of the diversified Adani Group, is the largest private thermal power producer in India. We have a power generation capacity of 15,250 MW comprising thermal power plants in Gujarat, Maharashtra, Karnataka, Rajasthan, Chhattisgarh, Madhya Pradesh, and Jharkhand, and a 40 MW solar power project in Gujarat. Job Purpose: This role is responsible for ensuring the availability and optimal performance of C&I systems related to the BoP area. This role involves strategic planning and execution of maintenance activities, by coordinating with other departments to enhance productivity, driving the adoption of new technologies and managing budgetary and manpower resources. Responsibilities Section Head - BOP Maintenance And Operational Efficiency Develop and execute strategic and tactical plans in collaboration with peers and HOD ensuring healthiness for 100% availability of control and instrumentation systems related to Fire Alarm, CHP, Water Circuit, AHP, RO, CCTV, PA systems, and auxiliaries. Regularly schedule back-ups of PLC (Programmable Logic Controller) systems. Monitor and ensure timely completion of Belt weigher and WT Weighbridge calibrations. Coordinate with other departments to minimize delays and enhance productivity. Ensure ZFO implementation and strive for zero human error. Ensure the implementation and adherence to actionable based FMEA, MOC, RCA, and other safety and compliance directives. Conduct short-term and long-term planning for routine maintenance and unit overhaul. Oversee plant improvement projects for system reliability and plant performance improvement. Budget Management Prepare, review and manage section budget including CAPEX identification/implementation in alignment with organizational objectives. Manage manpower within the section to align with budgetary constraints and operational needs. Oversee spares and inventory management, focusing on the development of indigenous spares for cost optimization. Monitor financial performance and implement cost-saving measures. Business Sustainability Ensure adherence to IMS, AWMS, DISHA, and CHETNA guidelines within the department. Ensure the safety of personnel and equipment through proper training and adherence to safety protocols. Ensure compliance with all legal and statutory requirements relevant to the department. Foster a culture of safety and compliance to achieve zero incidents. Digitization And Automation Lead and execute comprehensive digitization strategies to optimize operational efficiency. Innovate and implement automation solutions to support overall organizational goals and strategy. Review and implement process and system improvements, adopting newer technologies and innovative ideas. Regularly update and back up digital systems to ensure data integrity and operational continuity. Monitor the impact of digitization and automation on operational performance and adjust strategies as needed. People And Team Engagement Participate in the recruitment process to attract and retain skilled personnel for the C&I maintenance team. Drive and enhance employee engagement and retention across the team to sustain a positive workplace culture. Lead, inspire, and mentor the team to foster a high-performance culture and ensure cross-skilling through job rotation, technical and behavioural training. Ensure proper succession planning within the team. Key Stakeholders - Internal Environment & Sustainability Techno Commercial Operations & Maintenance Security Stores Support Functions ENDORSE ENOC Key Stakeholders - External Vendor Business Associates Qualifications Educational Qualification: Bachelor's degree in C&I or Electronics & Communication or equivalent degree. Work Experience (Range Of Years) 15+ years of experience in maintenance and operations, preferably in the power or heavy industries. Preferred Industry Experience in power generation, with exposure to BoP (Balance of Plant) operations including coal handling plant, water treatment plant and ash handling plant, CCTV, PA systems, FDA systems, etc.

About Us Planful is the pioneer of financial performance management cloud software. The Planful platform, which helps businesses drive peak financial performance, is used around the globe to streamline business-wide planning, budgeting, consolidations, reporting, and analytics. Planful empowers finance, accounting, and business users to plan confidently, close faster, and report accurately. More than 1,500 customers, including Bose, Boston Red Sox, Five Guys, Grafton Plc, Gousto, Specialized and Zappos rely on Planful to accelerate cycle times, increase productivity, and improve accuracy. Planful is a private company backed by Vector Capital, a leading global private equity firm. Learn more at planful.com. About The Role We are looking for self-driven, self-motivated, and passionate technical experts who would love to join us in solving the hardest problems in the EPM space. If you are capable of diving deep into our tech stack to glean through memory allocations, floating point calculations, and data indexing (in addition to many others), come join us. Requirements 5+ years in a mid-level Python Engineer role, preferably in analytics or fintech. Expert in Python (Flask, Django, pandas, NumPy, SciPy, scikit-learn) with hands-on performance tuning. Familiarity with AI-assisted development tools and IDEs (Cursor, Windsurf) and modern editor integrations (VS Code + Cline). Exposure to libraries supporting time-series forecasting. Proficient in SQL for complex queries on large datasets. Excellent analytical thinking, problem-solving, and communication skills. Nice To Have Shape financial time-series data: outlier detection/handling, missing-value imputation, techniques for small/limited datasets. Profile & optimize Python code (vectorization, multiprocessing, cProfile). Monitor model performance and iterate to improve accuracy. Collaborate with data scientists and stakeholders to integrate solutions. Why Planful Planful Exists To Enrich The World By Helping Our Customers And Our People Achieve Peak Performance. To Foster The Best In Class Work We’re So Proud Of, We’ve Created a Best In Class Culture, Including 2 Volunteer days, Birthday PTO, and quarterly company Wellness Days 3 months supply of diapers and meal deliveries for the first month of your Maternity/Paternity leave Annual Planful Palooza, our in-person, company-wide culture Company-wide Mentorship program with Executive sponsorship of CFO and Manager-specific monthly training programs Employee Resource Groups such as Women of Planful, LatinX at Planful, Parents of Planful, and many We encourage our teammates to bring their authentic selves to the team, and have full support in creating new ERGs & communities along the way.

We have an exciting opportunity for-Industrial Automation Sales Engineer. Siemens products and control panels! Location: Pune, Nagpur, Goa,- Ranjangaon or nearby areas Experience: 1 - 8 years in Automation Sales Experience in selling automation services Qualification: B.E in Electrical/Instrumentation/E&TC (MBA in Marketing is a plus!) Primary Skills Required: Strong knowledge of PLC, HMI, VFD (Siemens preferred, others acceptable) Smart communication skills with technical expertise What You'll Do: Sell automation products & solutions to prospective clients Meet & exceed sales targets Engage in techno-commercial discussions with clients Provide technical demonstrations and prepare sales proposals Build and maintain strong industry connections If you have a solid background in industrial automation sales and a knack for closing deals, we’d love to hear from you! If you are Interested drop a comment or DM me, or share your CV at # hiring@trimasyscontrol.com #Mob No -9156314994

Job Opening: PLC Engineer / Trainer Location: Cochin (Hybrid – UK-Based Coordination) Job Type: Full-Time, Permanent Salary: ₹70,000 – ₹140,000 per month (depending on experience) About Wartens Wartens is an ISO 9001:2015 certified global leader in industrial automation training. We specialize in PLC, SCADA, HMI, Robotics, and Industry 4.0 technologies. Operating across the UK, USA, UAE, and India, we are at the forefront of immersive learning experiences and next-generation automation solutions. Join our mission to "Innovate, Educate, Automate." IMPORTANT: PLEASE READ BEFORE APPLYING 🚫 Do NOT apply if you do not have hands-on experience with PLC or SCADA systems. 🚫 Do NOT apply if you are not fluent in English or lack strong communication skills. This role requires deep technical expertise and the ability to deliver high-quality training in English to an international audience. Key Responsibilities Deliver Professional Training: Teach industry-relevant content on PLC (Siemens, Allen Bradley, etc.), SCADA, HMI, and automation systems to students and working professionals. R&D and Program Development: Write PLC programs from scratch and engage in cutting-edge research on emerging automation technologies. Update and restructure training modules aligned with the latest trends and standards in industrial automation. Technology Integration: Incorporate Industry 4.0, AI, IIoT, and VR technologies into training for a next-gen learning experience. Global Collaboration: Coordinate with UK and international teams to ensure high-quality training delivery across borders. Key Requirements Technical Expertise Solid experience in PLC programming (Siemens S7, TIA Portal, Allen Bradley Studio 5000, etc.) In-depth knowledge of SCADA/HMI systems across platforms. Familiarity with control systems, IIoT, and industrial instrumentation. Training & Communication Skills Strong English communication and presentation skills are mandatory. 3–5 years of professional experience in industrial automation Willingness to travel for international onsite training programs when required. Note: Only shortlisted candidates with verified PLC/SCADA experience and excellent English communication will be contacted.

Established in 1973, Ralsonics manufactures industrial cleaning equipment and ultrasonics enhanced cleaning, processing and sieving machinery for customers spanning sixteen industrial sectors. Ralsonics is looking to hire an Electrical Engineer Installation & Site Supervisor who will play a critical role in ensuring timely, high-quality installation and commissioning of our ultrasonic cleaning and surface treatment equipment at customer sites. The candidate will act as the primary point of contact during the installation phase, coordinating between the customer and internal teams to ensure smooth execution and handover. The ideal candidate should have a Diploma or B.E./B.Tech in Electrical or Electrical & Electronics Engineering with 2 to 5 years of experience in on-site installation of capital or industrial equipment. A strong working knowledge of electrical panels, control wiring, instrumentation, and basic automation (PLC/HMI is a plus) is required. Additionally, the candidate should be comfortable with tools like multimeters, IR testers, and basic troubleshooting. A willingness to travel extensively for project execution across India is essential, along with good communication skills and a professional approach with customers. Key Responsibilities: - Supervise on-site electrical installation of machines, including wiring, cable routing, earthing, and panel integration. - Coordinate with internal fitters, project engineers, and the customer's site team. - Conduct pre-commissioning and functional testing of electrical and automation systems. - Ensure compliance with wiring diagrams, safety protocols, and project specifications. - Maintain detailed installation checklists, reports, and redlined drawings. - Act as the technical POC for the customer during installation and FAT. - Communicate proactively to resolve site issues and ensure timely handover. Job Location: Ralsonics Research Pvt. Ltd. Plot 5, K. T. Industrial Estate No.2, Behind Waghmare Hospital, Chinchpada, Waliv, Vasai East, Vasai, Palghar-401208, Maharashtra, India. Closest Train Station: Vasai Road Benefits: - PF, ESIC, conveyance, 21 days paid holidays, etc.,

As an Electrical Engineer - Installation & Site Supervisor at Ralsonics, you will be a crucial team member responsible for overseeing the efficient and timely installation and commissioning of ultrasonic cleaning and surface treatment equipment at customer sites. Your role will involve serving as the main point of contact during the installation process, facilitating seamless coordination between customers and internal teams for successful project execution. Your primary responsibilities will include supervising on-site electrical installations, managing tasks such as wiring, cable routing, earthing, and panel integration. You will collaborate with internal fitters, project engineers, and customer site teams to ensure smooth operations. Additionally, conducting pre-commissioning activities and functional testing of electrical and automation systems will be part of your duties, ensuring adherence to wiring diagrams, safety protocols, and project specifications. Maintaining meticulous installation checklists, reports, and redlined drawings will be essential, along with acting as the technical point of contact for customers during installation and Factory Acceptance Testing (FAT). Proactive communication to address site issues promptly and ensure timely project handover will be key to your success in this role. To be successful in this position, you should hold a Diploma or B.E./B.Tech degree in Electrical or Electrical & Electronics Engineering and possess 2 to 5 years of experience in on-site installation of capital or industrial equipment. Proficiency in electrical panels, control wiring, instrumentation, and basic automation (knowledge of PLC/HMI is advantageous) is required. Familiarity with tools like multimeters, IR testers, and basic troubleshooting skills is essential. A willingness to travel extensively across India for project execution, excellent communication abilities, and a professional demeanor with customers are important attributes for this role. This is a full-time, permanent position that offers benefits such as commuter assistance, a flexible schedule, leave encashment, paid time off, and Provident Fund. The work schedule is during the day shift, with a yearly bonus provided. A Diploma qualification and a minimum of 2 years of relevant work experience are necessary, along with a willingness to travel 75% of the time. If you meet these requirements and are enthusiastic about taking on this challenging role, we encourage you to apply and become part of our dynamic team at Ralsonics.,

Founded in 1933, OMRON has evolved into an organization committed to creating new social values. In the APAC region, OMRON has a strong presence in Industrial Automation, Healthcare, and Device & Module Solutions. Join the exciting journey of Shaping Future 2030 with OMRON. The Industrial Automation Business at OMRON aims to create social value by improving manufacturing to support a sustainable society. The business offers the industry's most extensive portfolio including sensors, controllers, motors, robotics, vision, and safety solutions. As a part of OMRON's Industrial Automation team, your key responsibilities will include: - Achieving sales and order booking targets in the assigned region - Developing and implementing business plans on a monthly, quarterly, and annual basis - Creating and executing account plans for all customers, updating them quarterly - Acquiring new customers through solution sales approach - Planning and forecasting sales on a monthly, quarterly, and yearly basis - Increasing in-house business shares in existing customers - Conducting Tech days/Seminars at key customers You will be responsible for partner management and stakeholder management, including managing Channel Partners, System Integrators, Solution partners, and distributors. Additionally, you will handle data management and analysis, preparing various MIS reports and maintaining eCRM hygiene. To qualify for this role, you should have: - Academic & Professional Qualification: B.E OR Equivalent Diploma, MBA in any stream (added advantage) - Minimum of 8+ years of experience in sales portfolio in the Industrial Automation Industry, handling OEM and End-user customers in the Automotive segment Core Functional Knowledge required includes PLC, Servo, HMI, Safety, Sensors, and Robotics Knowledge (Added Advantage), along with experience in dealing with OEM's, EU's, Channel Partners, Direct Customers, and System Integrators. Key Skills & Behavioural Competencies needed for this role are Good English Communication Skills, Presentation Skills, and Negotiation Skills. Join OMRON to be a part of a diverse workforce that values equal opportunities and aims to improve lives and contribute to a better society. Collaborate and innovate with capable minds globally.,

Responsibilities JOB DESCRIPTION Core Activities Project engineering, execution for DCS/PLC up-gradation, migration, rip and replace type of projects for Honeywell installed base. Work out accurate detailed BOM C-KOM, site data collection and input gathering. Prepare the FAT Documentation, HDM/SDM/FDS engineering documentations Ability to interpret and engineer the systems based on inputs like IO index, P&ID, C&E matrix, HAZOP etc. Ability to work on DCS / PLC / SCADA systems hardware, engineering and architecture. Factory co-ordination for panel manufacturing and in-time completion Responsible for pre-FAT & FAT testing & demo to customer &sign off Responsible for Standardization of Engineering. Ensures Quality Check on deliverables Communication with customer/consultant for project correspondences. Have a close coordination with project manager to drive the project based on revenue plans, billing plans and cash collection Executing Project along with I&C. Site closure as per HON processes. Vendor management, selection, PR – PO and follow-ups for delivery Contractor SOW preparation Required travel 30% to 40% of the time Follows ISO, HSE and internal processes. Added advantage to have knowledge and exposure on TPS/TDC3000 system and EPKS C200/C300 systems Achieve change orders / service orders for out of scope jobs Experience in offshore platforms will be an added advantage and the Engineer should be Ready to Travel offshore platform Platforms DCS - Yokogawa, Emerson, ABB, Rockwell, GE,, Honeywell PLC / SCADA - Siemens, Rockwell AB, Schneider, GE – Fanuc, Honeywell Safety Systems - Any Safety Systems Windows Platforms / Office Applications - WIN 2003 server , WIN 2008 server, WIN XP, WIN 7, Microsoft Excel, Word & Power-point, MS Projects, SAP Behaviors - Growth and Customer Focus, Gets Results, Fosters Teamwork and Diversity, Technical or Functional Excellence Qualifications Qualifications: BE - Instrumentation, Instrumentation & Control Years of Experience: 3+ years. About Us Honeywell helps organizations solve the world's most complex challenges in automation, the future of aviation and energy transition. As a trusted partner, we provide actionable solutions and innovation through our Aerospace Technologies, Building Automation, Energy and Sustainability Solutions, and Industrial Automation business segments – powered by our Honeywell Forge software – that help make the world smarter, safer and more sustainable.

Senior Software Engineer (Full Stack-.Net Developer) ICON plc is a world-leading healthcare intelligence and clinical research organization. We’re proud to foster an inclusive environment driving innovation and excellence, and we welcome you to join us on our mission to shape the future of clinical development. Full Stack - .Net Developer Responsibilities Design, develop, and maintain web applications using Angular, Java or .NET. Build RESTful APIs to support frontend and external system integration. Work with Oracle or MySQL databases for data storage and queries. Collaborate with cross-functional teams to understand requirements and deliver quality solutions. Perform unit testing, integration testing, and support UAT. Deploy and monitor applications on cloud environments (AWS/Azure) as needed. Participate in code reviews and follow best practices in software development. Contribute to performance tuning and application security enhancements. Skill Set Frontend: Angular (v8 or higher) Backend: Java (Spring Boot) or .NET (C#, ASP.NET Core) Database: Oracle or MySQL (SQL proficiency) API: RESTful services development and integration Cloud: Basic understanding or hands-on with AWS or Azure services Version Control: Git or BitBucket What ICON Can Offer You Our success depends on the quality of our people. That’s why we’ve made it a priority to build a diverse culture that rewards high performance and nurtures talent. In addition to your competitive salary, ICON offers a range of additional benefits. Our benefits are designed to be competitive within each country and are focused on well-being and work life balance opportunities for you and your family. Our Benefits Examples Include Various annual leave entitlements A range of health insurance offerings to suit you and your family’s needs. Competitive retirement planning offerings to maximize savings and plan with confidence for the years ahead. Global Employee Assistance Programme, LifeWorks, offering 24-hour access to a global network of over 80,000 independent specialized professionals who are there to support you and your family’s well-being. Life assurance Flexible country-specific optional benefits, including childcare vouchers, bike purchase schemes, discounted gym memberships, subsidized travel passes, health assessments, among others. Visit our careers site to read more about the benefits ICON offers. At ICON, inclusion & belonging are fundamental to our culture and values. We’re dedicated to providing an inclusive and accessible environment for all candidates. ICON is committed to providing a workplace free of discrimination and harassment. All qualified applicants will receive equal consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability or protected veteran status. If, because of a medical condition or disability, you need a reasonable accommodation for any part of the application process, or in order to perform the essential functions of a position, please let us know or submit a request here Interested in the role, but unsure if you meet all of the requirements? We would encourage you to apply regardless – there’s every chance you’re exactly what we’re looking for here at ICON whether it is for this or other roles. Are you a current ICON Employee? Please click here to apply

We are seeking a highly motivated and technically skilled Service Engineer responsible for the installation, qualification (IQ/OQ/PQ), troubleshooting, and maintenance of pharmaceutical packaging machinery. This includes equipment such as vial/bottle washing machines, filling & capping units, visual inspection systems, labeling machines, and packing conveyors. Key Responsibilities: 🛠️ Installation & Commissioning: Perform installation and alignment of packaging machinery at customer sites. Execute machine setup, calibration, and start-up trials. Train customer operators and maintenance staff on machine operation and care. 📋 Qualification & Documentation: Perform Installation Qualification (IQ), Operational Qualification (OQ), and assist in Performance Qualification (PQ) as per GMP norms. Generate and maintain required documentation such as: IQ/OQ protocols & reports FAT/SAT reports Service and installation reports Coordinate with validation teams and regulatory bodies when needed. 🔧 Troubleshooting & Maintenance: Diagnose and resolve technical issues in mechanical, electrical, pneumatic, or software systems. Provide preventive maintenance and emergency service visits. Replace spare parts and calibrate systems as required. 💼 Customer Support & Reporting: Maintain strong communication with customers regarding progress, issues, and solutions. Submit daily service reports, spare part usage reports, and feedback to service manager. Participate in remote technical support as needed. Machines Handled: Washing Machines: Vial/Bottle Washing (Rotary, Linear, Tunnel type) Filling Machines: Liquid Filling (Volumetric, Peristaltic, Piston-based) Capping Machines: ROPP, Screw, Flip-off capper Inspection Machines: Manual/Semi-automatic/Automatic Visual Inspection Labeling Machines: Sticker, Wraparound, Vial/Bottle Labelers Packing Conveyors: Straight/Inclined conveyors, Turntables Skills & Qualifications: ✅ Educational Qualification: Diploma / B.E. / B.Tech in Mechanical, Electrical, Electronics, Mechatronics, or Instrumentation Engineering. ✅ Technical Skills: Hands-on experience with pharmaceutical or packaging machinery. Knowledge of PLC/HMI-based controls, sensors, pneumatics, and drives. Ability to read mechanical & electrical drawings. Familiarity with GMP, 21 CFR Part 11, and validation protocols. ✅ Soft Skills: Strong communication & customer-handling skills. Problem-solving and time management. Willingness to travel extensively. Experience Required: 2 to 6 years in installation/service of pharmaceutical or packaging machines. Freshers can also apply.

The Senior Manager in the Assembly department of Production & Logistics based in Pune is responsible for leading the maintenance team members to efficiently resolve daily equipment breakdowns in a timely manner while ensuring safe working conditions. The role includes planning and organizing daily maintenance activities, demonstrating problem-solving skills for preventive maintenance and breakdown abnormalities. The Senior Manager collaborates with various cross-functional teams to address issues related to productivity, quality, and other process-related matters. Additionally, they are responsible for validating that all PLC, HMI, and drive programs adhere to ITS standards. Moreover, the Senior Manager is accountable for evaluating, training, and developing the skills of the team members to enhance their capabilities. Furthermore, they are tasked with optimizing utilities in the Assembly shop through various initiatives. The ideal candidate for this position should have a minimum of 5 years of experience with a BE qualification. This is an on-roll employment opportunity.,

You should have experience in DCS, PLC, and possess knowledge of control systems. Previous work in a power plant environment is preferred. The job is full-time and permanent. You must be willing to commute to Phalodi, Rajasthan, or be prepared to relocate there before starting work. As part of the application process, please provide information about your current salary and your expected salary. A Bachelor's degree is preferred for this position. Ideally, you should have at least 3 years of experience in electrical engineering and 3 years of experience in a thermal power plant. The work location for this role is in person.,

Kokban Automation Pvt Ltd is a reputable company that was established in March 2012 with the vision of becoming a trusted supplier of energy-efficient automation solutions through the utilization of cutting-edge technology, innovation, and a team of competitive professionals dedicated to delivering the highest quality service. The company operates across various segments including Process Automation, Electrical Automation, Infrastructure Automation Solutions, and Advanced Control Solutions. With its engineering office located in Magarpattacity, Pune, Kokban currently serves the Indian and Middle East Market, demonstrating its commitment to excellence and growth in the technology sector. As a fast-growing Technology Company with projects spanning diverse domains, Kokban is seeking successful candidates to join their team and contribute to their continued success. The job profile entails working in areas such as DCS/PLC/SCADA-based Automation, RTU/SCADA-based Substation Automation, Fire and Gas Detection Systems, and BMS & Electrical Power Management Systems. Candidates selected for this role will undergo a 3-month On-the-Job Training program with a stipend of INR 10,000 per month. Upon completion of the training, a competitive salary of 2.5 LPA will be offered to the candidates. A bond period of 2 years and 3 months, including the training period, is mandatory for all selected candidates. The ideal candidates for this position should possess technical skills including knowledge of DCS/PLC/SCADA and AUTOCAD, in addition to demonstrating desirable behavioral skills such as ownership with high integrity, a learning attitude, adaptability, punctuality, efficiency, and strong analytical skills. Qualification requirements include a degree in B.E/B.Tech in Instrumentation, Electrical, or Electronics with a graduation passing year of 2023 & 2024. It is worth noting that preference will be given to local candidates from Bhubaneswar, Orrisa for this position. This is a full-time, permanent position suitable for freshers, offering benefits such as Leave encashment and Provident Fund. The work schedule is during the day shift, with a preference for candidates available for the day shift. The work location is in person, providing an opportunity for individuals to work in a dynamic and innovative environment at Kokban Automation Pvt Ltd.,

You will be joining Technocraft Industries India Ltd. as a Sr. Electrical Automation Engineer based in Thane-Murbad. Your role will involve designing, implementing, and maintaining automation systems, troubleshooting electrical issues, and ensuring the smooth operation of process control systems. You will work with robotics, deploy and optimize automation solutions, and collaborate with various teams to enhance productivity and efficiency. To excel in this role, you should have 6-8 years of experience in a relevant field with expertise in Electrical Engineering, Automation, and Robotics. Strong skills in Process Control, Troubleshooting, problem-solving, and analytics are essential. The ability to work independently and as part of a team is crucial. A Bachelor's degree in Electrical Engineering or a related field is required, and experience in precision engineering and manufacturing industry would be advantageous. Proficiency in industry-standard tools and software is expected. Your responsibilities will include working with PLC, HMI, Drives, and Servo systems, particularly Mitsubishi and Allen-Bradley. Your contributions will play a key role in maintaining high-quality automation systems and ensuring efficient operations within the organization.,

As an Automation Engineer at Pentair, you will be a crucial part of the team responsible for transforming manufacturing sites into Factories of the Future through operational excellence. Your primary focus will be on designing, integrating, and expanding Industry 4.0 initiatives, which includes implementing SCADA and MES solutions across our global manufacturing sites. In this role, you will be tasked with developing industrial automation, controls design, programming, IT/OT network architecture, communication protocols, and data analytics solutions. You will work closely with the Global Engineering Centre (GEC) to establish digital factory vision, strategy, and roadmap, collaborating with Pentair AMET and cross-functional teams. Your responsibilities will encompass setting Enterprise standards for Industry 4.0 solutions, collaborating with offshore teams and contractors, designing user-friendly HMI and SCADA interfaces, establishing IT/OT connectivity with various devices, controllers, and systems, and conducting testing and commissioning of automation systems. Additionally, you will be required to create and maintain detailed documentation, troubleshoot system-related issues, perform maintenance and upgrades, ensure safety and compliance standards, and collaborate with mechanical engineers, software developers, and project managers for seamless integration of automation solutions. To be successful in this role, you should possess a diploma/bachelor's degree in electrical engineering, Automation, or a related field, along with 5-8 years of experience in electrical automation system design and implementation. Professional certifications related to automation and expertise in MES, ERP systems, and Ignition are highly desirable. Furthermore, you must exhibit a can-do positive attitude, be driven, innovative, and adaptable to new technologies. Strong communication and presentation skills are essential for effective interactions with global team members, stakeholders, leadership, vendors, and customers. Pentair is an Equal Opportunity Employer that values diversity and believes in leveraging cross-cultural insights for success. Join us in our mission to continuously improve and innovate in the field of automation engineering.,

Role Purpose The role incumbent is focused on implementation of roadmaps for business process analysis, data analysis, diagnosis of gaps, business requirements & functional definitions, best practices application, meeting facilitation, and contributes to project planning. Consultants are expected to contribute to solution building for the client & practice. The role holder can handle higher scale and complexity compared to a Consultant profile and is more proactive in client interactions. Do Assumes responsibilities as the main client contact leading engagement w/ 10-20% support from Consulting & Client Partners. Develops, assesses, and validates a clients business strategy, including industry and competitive positioning and strategic direction Develops solutions and services to suit clients business strategy Estimates scope and liability for delivery of the end product/solution Seeks opportunities to develop revenue in existing and new areas Leads an engagement and oversees others contributions at a customer end, such that customer expectations are met or exceeded. Drives Proposal creation and presales activities for the engagement; new accounts Contributes towards the development of practice policies, procedures, frameworks etc. Guides less experienced team members in delivering solutions. Leads efforts towards building go-to-market/ off the shelf / point solutions and process smethodologies for reuse Creates reusable IP from managed projects Mandatory Skills: OSI PI.: Experience: 8-10 Years.

Job Description Detailed skills/experience: Design and development of manual & automatic test equipment/machines, mechanical & electro-mechanical test manual/automatic assembly jigs/fixtures/systems etc. Ability to implement cost-effective methods of testing, validation methods and troubleshooting systems and equipment. Prepare test and diagnostic programs, designs test fixtures and equipment. Managing Special Purpose Machine Vendors for getting the SPM developed, process capabilities (Cpk) analysis on test equipment prior to deployment on the production floor. Deep understanding of a variety of test engineering standards and specifications. Proficiency/Basic knowledge about writing/understanding algorithm for developing Test Software Logic, Test software architecture, ability to identify or isolate issues between test hardware & test software, knowledge about process automation/robotics to get productivity, capability to complete demanding assignments by applying advanced test engineering methods and tools. Software Platform- LabVIEW, Python, Java, etc. Troubleshooting activities involving repair & maintenance of test equipment/machines/fixture jigs as well as product failure analysis, facilitate issue identification and analysis, driving TPM (Total Productive Maintenance) for test equipment/machines to improve the OEE (Overall Equipment Effectiveness), ability to develop safety fixtures for machines/test equipment, Spare management strategy. Sound knowledge of manufacturing processes of electronic or electromechanical products, ICT process & basic ICT/flying probe test techniques, testing procedures, ESS or other reliability tests, hands on experience/knowledge related with soldering processes, potting processes, ability to provide the alternate methods/ test solutions in case of failure of test equipment/machines, root cause analysis/failure analysis, component engineering, TPM/OEE etc. Awareness about end to end new product development (NPD) process, phase in-phase out planning, technical feasibility analysis, project management skills, participate in project teams, creating solutions that meet the dynamic needs of new products from concept development through the start of production and preparation of end-to-end ISC NPD program schedule, Qualifications & Trial Run processes, Agency Certification knowledge , Awareness about Engineering Change Notices (ECN) process. Responsibilities Key Responsibilities: In-House Design/Development & Deployment of Automatic Test Equipment (ATE’s) Design, deployment of Mfg. Process on floor & improvements. Develop new techniques, analytical tools and improve work practices. Test Engineering documentation & improvements, Scope of Work documents for customized equipment build though third party. Automation & Digitalization & Refurbishment of old Test Equipment/Jigs Yield Management, RCA/failure analysis & troubleshooting of test equipment, products & process. Qualifications Other Tech Knowledge: Sound in electronic, instrumentation & electrical fundamentals, digital and analog electronics, microprocessors, microcontrollers, ADC/DAC, Op Amp. Etc., troubleshooting of electronics and instrumentation-based test equipment/machines, electronic & electromechanical manufacturing processes, IPC standard. Sound in GPIB, LXI, PXI, Serial (RS232 and RS485) and USB test instruments communication, PLC, shall be well familiar with DE, HART, FIELD BUS, IPC, Profibus protocol etc. Knowledge on test instruments from NI, VXI/VTI, Agilent, Tektronics, Chroma, Fluke , Krohn-Hite, and California instruments, Ametek etc. Debugging skills of test software source codes written in Lab-view, Lua Scripts , C, C++, VB etc. Mechanical engineering basics, understanding of mech drawing, circuit schematics, electrical diagrams, compressor, pneumatics, knowledge about process chemicals etc. HSE- Machine Safety, Kaizen, Poka-yoke techniques, RCA etc. Soft Skills Effective verbal and written communication/presentation skills Basic Financial knowledge- working capital, inventory, product costing, capital budgeting etc. Fluent in English and local dialect Proficiency in MS Word, MS Excel, MS Power Point, MS Project. Hands-on experience in SAP/ERP systems etc. Basics knowledge about lab-view, NI lab-windows platform, Python, Java, etc. 6-sigma, Cp, Cpk, Pareto Analysis, statistical techniques etc. Location : Honeywell, Fulgaon, Pune Shift : General Shift. But sometimes shall have to attend global meetings in the evening. Person may have to work late evening Or on Saturday/Sunday in case of Crisis Situation. No work from home (WFH) for this role. About Us Honeywell helps organizations solve the world's most complex challenges in automation, the future of aviation and energy transition. As a trusted partner, we provide actionable solutions and innovation through our Aerospace Technologies, Building Automation, Energy and Sustainability Solutions, and Industrial Automation business segments – powered by our Honeywell Forge software – that help make the world smarter, safer and more sustainable.

Job Description JD for Systems Engineer I Reporting to Systems Engineering Supervisor Travel: 30-70% (as per project requirement) Roles And Responsibilities Controls Systems Hardware and Application software hands-on experience – DCS. ESD, F&G systems (ICSS projects) Deliver technical solution to customers within agreed schedule and budget Work closely with Project Lead, Engineering Supervisor, other Leads and Project Manager. Understand the customer’s project Specifications, RFQ, Architecture, etc., Hands-on working in detail engineering, System Architecture, BOM To collaborate with team and carry out Control System Hardware and Software Detail Engineering (including HMI), Application Development, Testing, Integration of Hardware, FAT with customer at factory as per project duration, Site Commissioning, system Cut-over’s, Loop Checking. Use effectively Typical / Templates for Complex Loops and project specific standards To read, understand P&IDs, Control Narratives, Logic diagrams, etc. Complete assigned work scope against the project plan, with 100% quality delivery (Right the First time) Site visit for Control & safety Systems Installation supervision, SAT, pre-commissioning, commissioning and hand over the project to customer / LSS team. Ensure compliance with quality / safety procedures during Engineering & Site execution phase. Identify possible improvement opportunities, share and contribute for its implementation Practice common methods, techniques, tools and products and provide feedback for future improvement Usage of engineering tools for optimization of Engineering man hours Technical Skills Should have minimum 3+ years of hands-on experience in: DCS / Safety PLC / PLC (preferably on Honeywell Systems) – Being part of Detail engineering, Testing and Commissioning. Third party systems interface – Modbus TCP, Modbus RTU, OPC (UA, DA, HDA, A&E), ProfiNet, Profibus and similar. HART, Foundation Fieldbus, Profibus Advanced L2/L3 nodes – Alarm, History, Asset, Network Management Networking Knowledge: TCP/IP protocols, Switch/Router and domain controller configurations. Virtualization of control nodes – added advantage Domain knowledge – Refinery, Petrochemicals, Pipeline, Power, Renewables Behavioral Skills Plan, Execute & deliver as per commitments Team player with Good command on Oral + Written communication Strong ability to work as team player and acquire/share technical skills and competencies. Customer interaction capabilities during Project life cycle. Responsibilities Education Bachelor’s degree (BE/B Tech – Instrumentation, Electronics) WE VALUE Very good knowledge of Control & Safety systems Individual who quickly analyze, incorporate, and apply new information and concepts. Diverse and global teaming and collaboration Ability to communicate with individuals within the project team. Individuals who are self-motivated and able to work independently, who consistently complete the assignments within schedule & 100% Quality. Ability to adapt to change with ease About Us Honeywell helps organizations solve the world's most complex challenges in automation, the future of aviation and energy transition. As a trusted partner, we provide actionable solutions and innovation through our Aerospace Technologies, Building Automation, Energy and Sustainability Solutions, and Industrial Automation business segments – powered by our Honeywell Forge software – that help make the world smarter, safer and more sustainable.

Job Description PIC's control systems have components of regulatory and batch control, advanced process control, expert systems, DCS (Distributed Control Systems) Interfacing, training simulators. PIC's work process also involves staging and testing of its products with a dynamic simulator and the programming of same. PIC is involved in the production and development of many different control systems that are sold to external customers. Each member of the Software Group has the responsibility for ongoing development of existing products and the support of the Project Engineering and Service Groups. Additionally, the development of control systems for new UOP processes are regularly undertaken by the group. The PIC department is accountable for the production and development of custom control systems based on PLCs and PCs that are sold to external customers. Key Responsibilities Execution of programming tasks for assigned projects, within budgeted hours and schedule at required level of quality Provide recommendations for improving software/programs, service support and testing activities to improve the competitiveness of UOP PIC products Support maintenance and development of systems (ISO-9001) and resources (coaching & training) so that PIC area can effectively transfer technology to the marketplace in a manner that maximizes value to UOP and to our customers Identifying and executing opportunities for continuous work process and productivity improvements, for optimization of project deliverables by maximizing efficiency through better methods, masters, systems, and tools; minimizing the costs Configuring/networking PCs, Virtual Machines (VMs) and control system hardware to allow simulation, integration, testing and/or troubleshooting of hardware and/or software Regular reporting on the status of assigned projects and tasks Typical Tasks Would Be Customizing and/or developing software architecture, logic (coding in multiple languages), and operator interface applications Support and/or perform integration, testing, verification, and validation Converting functional specifications or process control ideas to software Creating/improving master programs Feature Definition Qualifications YOU MUST HAVE You Must Have Bachelors degree in Engineering (Chemical, Electrical or Computer) or Computer Science 7+ years of control systems software development and customization experience We Value Experience with UOP PIC control system product lines such as PSA, ACCS, DRCS, CRCS, etc. Experience in developing/customizing control systems software for batch or continuous process application in the refining and/or petrochemicals industries is considered ideal Working knowledge of Honeywell control system products and software including Experion HMIWeb, Safety Builder, Safety Manager, Control Builder and C300 as a strong plus Working knowledge of HMI programming software such as InTouch Wonderware as a plus. Working knowledge of programmable controllers and its programming software such as Invensys Tricon/Trident, Tristation, Siemens S7, Modicon M580, EcoStruxure ControlExpert, Studio5000 and/or Rockwell/Allen-Bradley ControlLogix PLC as a strong plus Understanding of interfaces such as RS-232, RS-422, Ethernet, fiber optic, and interface protocols such as Modbus and Object Linking & Embedding for Process Control (OPC) Understanding of control panel electrical schematics including components such as power supplies, breakers, relays, and analog and digital wire loops Understanding of the concepts and role of software within control systems as a key Understanding various software development lifecycle. Knowledge of software configuration management and change management practices Strong organizational, troubleshooting, problem solving and analytical skills Effective Communicator Wide degree of creativity and latitude Individuals who are self-motivated and able to work with little supervision, who consistently take the initiative to get things done, do things before being asked by others or forced to by events Ability to consistently make timely decisions even in the face of complexity, balancing systematic analysis with decisiveness Can quickly analyze, incorporate, and apply new information and concepts Diverse and global teaming and collaboration Ability to travel up to 10% annually to both domestic and international locations. WE VALUE Knowledge of the systems development lifecycle Individuals that quickly analyze, incorporate and apply new information and concepts. Leading diverse and global team Advanced with Individuals who are self-motivated and able to work with little supervision, who consistently take the initiative to get things done. Ability to adapt dictated by project changes Multi-tasking and has the ability to manage a variety of complicated tasks and people Making autonomous decisions Some engineering experience

Controls Engineer - PLC programming and IOT Responsibilities Understanding project requirements and completing all duties assigned by the Supervisor. Participating in meetings and attending workshops and other training initiatives Should design, implement, and test a wide range of I/O (HART, Modbus, FF, Profibus etc.), basic control functions, interlocks, sequences, operator interface and other control components on DCS and PLC. Documenting the project control and safety functions, presenting them to the customer and get approval. Preparing simulations, test scenarios, test documentation, and participates in customer Factory Acceptance Tests. Actively participates in project meetings, discussion with customers, visiting sites and supporting commissioning activities Should be able to troubleshoot the control and communication problems between different systems during FAT and at site. Compiles and maintains project databases, configuration data, or other project information. Compiles data and prepares reports for various activities such as customer proposals, FEED studies, project design documents, FAT and SAT procedures etc. Shall be capable to identify technical opportunities and economic justification for control system improvements and communicates those to the Project Manager and/or Sales Qualifications Graduate in Engineering Disciplines EElectronics & Instrumentation Engineering, Instrumentation & Control Engineering with minimum 3 years of relevant experience Essential Skills Should have the basic understanding of programmable logic controllers, distributed control systems, Safety systems, Fire & Gas systems, IIoT and Industry 4.0 Should aware of industry standards and practices (e.g., ISA standards) that apply to control system design. Should have firm and increasing understanding of process control concepts and techniques. Should understand networking devices & components like ethernet switches, Fiber optic switches,firewalls etc., Should understand the various industrial communication protocols like Modbus, Profibus, HART, FF etc., Should have good communication skills. Attitude to Works effectively as individual & in team environment and shall be able to handle multiple projects simultaneously. Desired Skills Strong analytical and mathematical skills Strong written and verbal communication skills A growth mindset and a commitment to lifelong learning & willingness to accept criticism Willing to travel for site commissioning activities depending upon the project requirements Maintaining a high degree of professionalism and diligence Experience Minimum 3 years of relevant experience

Job Requirements Job Description Why work for us? Alkegen brings together two of the world’s leading specialty materials companies to create one new, innovation-driven leader focused on battery technologies, filtration media, and specialty insulation and sealing materials. Through global reach and breakthrough inventions, we’re delivering products that enable the world to breathe easier, live greener, and go further than ever before. With over 60 manufacturing facilities with a global workforce of over 9,000 of the industry’s most experienced talent, including insulation and filtration experts, Alkegen is uniquely positioned to help customers impact the environment in meaningful ways. Alkegen offers a range of dynamic career opportunities with globe-spanning reach. From production operators to engineers, technicians to specialists, sales to leadership, we’re always looking for top talent ready to bring their best. Come grow with us! Job Requirements We are seeking a Process Engineer to design, optimize, and scale critical operational workflows with a focus on efficiency, quality, and safety. This role collaborates across engineering, production, quality, and other support teams to enable seamless operations. Responsibilities Process Design & Optimization Design, develop, and continuously improve operational processes using tools like process flow diagrams (PFDs), simulations, and modelling software across all production stages. Performance Monitoring & Analytics Track and analyze key process metrics (e.g., OEE, yield, throughput), perform root-cause analysis, and implement targeted improvements. Troubleshooting & Continuous Improvement Apply methodologies like Six Sigma, Lean, and Kaizen to troubleshoot and drive process enhancements. Compliance Conduct risk assessments, enforce compliance with safety, environmental, and quality standards (e.g. IMS). Documentation & Training Create and maintain SOPs, work instructions, training guides, process criteria, and ensure knowledge is accessible. Cross-functional Collaboration Work closely with production, quality assurance, Engineering & other support functions to ensure smooth process integration and scalable production. KPI Management Tracking key performance indicators (KPIs) to identify areas for improvement and monitor the effectiveness of implemented changes. Improvement Project Managing projects related to process improvement, including timelines, budgets, and risk assessments. Drive Cost reduction culture and work on reducing the manufacturing cost. Qualifications/ Experience B. Tech Ceramic Technology / Chemical Engineering / Mechanical Engineering. B. Tech from Ceramic Technology would be an added advantage. 8-10 years of Process improvement experience in an industrial environment. Six Sigma Green/ Black belt certification. Strong analytical and problem-solving skills; data-driven mindset and comfort with statistical tools. Familiarity with Lean/Six Sigma, SPC, or Kaizen methodologies. Excellent written and verbal communication and cross‑team collaboration skills. Experience with process control systems, PLC automation and/or manufacturing execution systems beneficial. If you are interested in being part of a world class Talent function here at Alkegen then we would love to hear from you. At Alkegen, we strive every day to help people – ALL PEOPLE – breathe easier, live greener and go further than ever before. We believe that diversity and inclusion is central to this mission and to our impact. Our diverse and inclusive culture drives our growth & innovation and we nurture it by actively embracing our differences and using our varied perspectives to solve the complex challenges facing our changing and diverse world. Employment selection and related decisions are made without regard to sex, race, ethnicity, nation of origin, religion, color, gender identity and expression, age, disability, education, opinions, culture, languages spoken, veteran’s status, or any other protected class.