620 Nfpa Jobs

Job Purpose: To ensure the highest standards of health, safety, and environmental (HSE) compliance in transformer manufacturing operations, particularly in electrical and high-voltage areas, as per statutory and regulatory requirements. Key Responsibilities: 1. Compliance & Regulatory Adherence: Ensure compliance with all factory safety laws, electrical safety regulations, and transformer manufacturing industry standards (e.g., IS, IEC, OSHA, NFPA standards). Maintain and update safety documentation as per statutory requirements. 2. Electrical & High-Voltage Safety: Develop and implement electrical safety protocols for high-voltage testing, winding, assembly, and transformer oil handling. Ensure Lockout-Tagout (LOTO), grounding, and safe isolation practices are strictly followed. Monitor short-circuit withstand test safety, dielectric test safety, and high-voltage testing areas. 3. Risk Assessment & Audits: Conduct Job Safety Analysis (JSA) and Hazard Identification & Risk Assessment (HIRA) specifically for transformer assembly lines, tank fabrication, and testing bays. Perform regular safety audits, inspections, and electrical hazard assessments in the plant. 4. Incident Prevention & Investigation: Investigate electrical and occupational accidents, prepare root cause analysis (RCA), and ensure corrective and preventive actions (CAPA). Maintain incident and near-miss reporting systems. 5. Training & Awareness: Conduct safety induction and regular training programs for employees and contractors on: Electrical safety in high-voltage environments Safe handling of transformer oil, chemicals, and hot work permits Firefighting and emergency response Promote a strong safety culture among workers and management. 6. Emergency Preparedness: Develop and implement emergency response plans for electrical accidents, transformer oil fire hazards, and high-voltage incidents. Ensure the availability and proper maintenance of firefighting systems, PPE, and first-aid equipment. 7. Coordination & Reporting: Liaise with statutory authorities during inspections. Submit regular safety performance reports to management. Qualification & Experience: Educational Qualification: Degree in Electrical Engineering with a recognized Industrial Safety Certification (e.g., NEBOSH, IOSH, Diploma in Industrial Safety). Experience: 5+ years in HSE, preferably in transformer manufacturing or heavy electrical equipment industry. Key Skills: Strong knowledge of electrical hazard management and industrial safety practices. Hands-on experience in LOTO, HIRA, PTW (Permit to Work) systems. Good communication & training skills. Analytical approach for risk assessment and incident investigation. Work Conditions: Plant-based role, involving frequent visits to shop floor, testing bays, and fabrication areas. May involve extended working hours during high-voltage testing or critical operations.

job description tailored for a Fabrication Engineer role in the EPC industry, with a focus on Firefighting Services & Safety Systems: Job Title: Fabrication Engineer – Firefighting & Safety Systems (EPC)Department: Engineering / Projects / FabricationLocation: [Insert Location or Project Site]Reporting To: Project Manager / Fabrication Lead / Engineering HeadJob Type: Full-TimePosition OverviewWe are looking for an experienced Fabrication Engineer to oversee the prefabrication and assembly processes of piping, structural supports, equipment skids, and component housings used in firefighting and life safety systems. The candidate should possess a deep understanding of fabrication practices as they relate to fire protection systems across industrial, commercial, and infrastructure-based EPC projects. Key Responsibilities1. Fabrication Planning & ExecutionInterpret detailed fabrication drawings, P&IDs, and isometrics related to fire protection piping and safety systems. Develop fabrication plans for: Sprinkler piping systems (MS/GI/SS) Fire hydrant piping, standpipes, hose reel piping Skids for suppression systems (e.g., FM200, foam, clean agent) Pump room and valve assembly fabrication Ensure adherence to welding procedures (WPS/PQR/WPQ) and NDT requirements. Coordinate with workshop and site teams for timely and accurate prefabrication and dispatch. 2. Material & Resource CoordinationPrepare cutting plans, material take-offs (MTO), and Bill of Materials (BOM) for fabrication scope. Verify material grades, thicknesses, and specifications (pipes, fittings, supports). Ensure traceability of materials and maintain fabrication quality records. 3. Quality Assurance & ControlConduct visual inspections, dimensional checks, and fit-up assessments. Support QA/QC team in hydrostatic testing, pneumatic testing, and third-party inspections. Ensure compliance with standards such as NFPA, IS codes, and ASME (where applicable). Address fabrication-related NCRs and implement corrective actions. 4. Documentation & ReportingMaintain fabrication records, weld logs, and daily progress reports. Collaborate with design and engineering teams for any fabrication deviations or site modifications. Assist in preparing fabrication dossiers and as-built documentation. Required Qualifications & SkillsDiploma / Bachelor’s Degree in Mechanical Engineering / Production Engineering or related field. 3–8 years of relevant experience in fabrication within EPC projects, preferably fire safety-focused. Sound understanding of fabrication techniques (welding, cutting, bending, threading, grooving). Familiarity with fire protection system layouts and related fabrication requirements. Proficiency in reading fabrication drawings, isometric views, and GA drawings. Working knowledge of fabrication tools, CNC pipe cutters, welding machines, and threading equipment. Knowledge of fabrication codes and standards: IS, ASME, NFPA preferred. Certifications (Preferred but Not Mandatory) Welding Inspector Certification (CSWIP / AWS / ISNT Level II) Fire Safety Training (NFPA / TAC / CFPS exposure) ISO/OSHAS understanding in fabrication environments Behavioral Competencies Strong planning and coordination skills Detail-oriented with a quality-first approach Ability to manage deadlines and multitask under site pressure Team player with excellent communication and documentation ability Working Conditions Workshop and site-based role; must be comfortable with industrial fabrication shop environments. May require travel to project sites or client facilities during installation or inspections. Willingness to work extra hours during peak production phases. Why Join Us Be part of impactful EPC fire safety projects that protect lives and assets. Exposure to high-standard fabrication systems and international codes. Grow with a team dedicated to quality, safety, and engineering excellence.

Company Description At FPC Global, we’re not just shaping the future—we’re building it. Our mission, "Building Tomorrow’s Digital Planet," reflects our unwavering commitment to transforming industries, creating smarter spaces, and driving sustainable progress. Since our founding in 2014, we have grown into a global leader with over 140 exceptional professionals, operating across the Americas, EMEA, APAC, and with our headquarters in London. We specialize in delivering integrated, cutting-edge consultancy services that span the entire facility lifecycle, ensuring that every project we undertake sets a new standard for innovation and excellence. Our business thrives on three dynamic pillars: FPC Global: Offering expert guidance in Technical Program & Project Management, Building Performance, Sustainability, and Cybersecurity, we ensure that every project succeeds and fulfills stakeholder aspirations. FPC Digital: Revolutionizing Digital Building Design and Operations, we create spaces that are not only efficient but also frictionless and forward-thinking. FPC Life Sciences: Empowering life sciences and pharmaceutical clients to deliver game-changing capital projects with precision and expertise. Job Description We’re thrilled to announce that, due to recent project wins, we have several exciting roles opening up across our team, all of which are available to start immediately We’re particularly interested in hearing from candidates with strong data center experience, so if this is your area of expertise, we’d love to connect. If you’re ready to take the next step in your career, we’d love to hear from you. The responsibilities for this role include, but are not limited to, the following: Commissioning Management: Oversee the entire commissioning process of electrical systems in datacenters, ensuring systems are installed, tested, and commissioned according to project requirements, standards, and schedules. Electrical Systems Testing & Validation: Manage the commissioning of electrical equipment, including transformers, switchgear, uninterruptible power supplies (UPS), generators, and electrical distribution panels. Project Oversight: Plan, coordinate, and lead commissioning activities, working closely with construction, engineering, and operations teams to ensure project objectives are met. Power Systems Integration: Ensure that electrical systems integrate seamlessly with mechanical, control, and IT systems, maintaining redundancy and reliability for mission-critical operations. Documentation & Reporting: Develop detailed commissioning plans, procedures, test scripts, and final handover documentation. Provide regular progress reports to project stakeholders. Compliance & Standards: Ensure all electrical systems and commissioning processes comply with relevant standards and codes (e.g., NEC, IEC, NFPA, IEEE, Uptime Institute Tier Standards, TIA-942). Factory and Site Acceptance Testing (FAT & SAT): Coordinate and lead Factory Acceptance Testing (FAT) and Site Acceptance Testing (SAT) for electrical systems, ensuring all equipment functions correctly before site integration. Risk Management & Troubleshooting: Identify potential risks or issues during the commissioning process and implement mitigation strategies. Troubleshoot and resolve technical issues to ensure the timely and safe completion of commissioning. Health & Safety Compliance: deep understanding of safety requirements working around live components , 3-phase AC Power and DC power systems. Ensure all commissioning activities comply with health and safety regulations, creating a safe working environment for all team members and contractors. Team Leadership: Lead and mentor commissioning engineers, contractors, and subcontractors, providing guidance and support throughout the commissioning process. Adhere to company policies and procedures, and promote a culture of continuous improvement and excellence. Qualifications The ideal candidate for the Commissioning Engineer position should possess the following qualifications and experience: Proven track record in commissioning electrical systems such as UPS, RMU, switchgear, generators, Transformers (CT/VT) and power distribution units (PDU) in data centres or other mission-critical environments. Technical Expertise: Strong understanding of low to medium voltage electrical systems, including power distribution, transformers, backup power systems (UPS and generators), and electrical infrastructure for data centres and large office buildings. Experience of 220 KV substation commissioning will be an added advantage. Should have knowledge of monitoring & control systems such as SCADA and Electrical Power Management System ( EPMS). Good experience of writing Testing Scripts for functional performance testing( FPT) and Integrated System Testing (IST) and leading the team to perform these tests in a datacenter. Technical knowledge and experience of commissioning Life Safety systems is desirable. Capability to review designs with commissionability perspective is essential. Software Skills: Proficiency in electrical design software (e.g., AutoCAD, ETAP), project management tools (e.g., MS Project), and familiarity with Building Information Modeling (BIM) tools. Knowledge of Commissioning Tools such as Cx Alloy, Procore, Compass and Cloud Platforms (Google, Microsoft, Amazon) and Data Analytics. Experience of Auditing an existing facility for indepth health check of installed equipment and systems. Project Management: Demonstrated experience managing commissioning schedules, budgets, and resources. Leadership & Communication: Strong leadership, organisational, and interpersonal skills is required. Ability to communicate effectively with project stakeholders, contractors, and technical teams. Problem Solving: Strong analytical and troubleshooting skills with the ability to identify and resolve issues quickly. Good experience of delivering a complete project lifecycle in the datacenter industry is a plus Essential Qualifications: Degree in Electrical Engineering ( B. Tech/ B.E. or equivalent) Minimum 8 years of hands-on experience in testing & commissioning of power supply and electrical distribution systems covering high, medium and low voltage equipment. Experience of commissioning projects in datacenter, Power Oil & Gas or any other mission critical industry. Hyderabad, India based or willing to relocate to Hyderabad. Additional Information FPC Employee Benefits: We offer a competitive salary and benefits package tailored to your role, with additional performance-based rewards. Our benefits include: Flexible and Hybrid Working Model Family Health Insurance Flexible Holidays Competitive Salaries and Discretionary Annual Bonus Scheme Professional development opportunities Why Join FPC? At FPC, we’re not just a company—we’re a thriving community where innovation flourishes, ideas are celebrated, and careers are shaped. When you join us, you become part of a dynamic team that: Shapes the Future: Work on groundbreaking projects that are redefining industries with sustainability, cutting-edge technology, and bold ambition. Supports Your Growth: From leadership training to cross-functional collaboration, we prioritize your professional development and empower you to explore new ideas, take initiative, and grow in your career. Values Balance and Inclusion: We celebrate diversity, foster collaboration, and ensure every voice is heard—while maintaining a strong commitment to work-life balance. Creates Impact: Contribute to the delivery of iconic, high-performance buildings and innovative solutions that have a lasting, positive impact on the world. Together, we’ll build tomorrow’s digital planet—and you’ll be part of something truly extraordinary.

Job Description Carry out complete design of pumping stations for sewage, storm water, irrigation, potable water and firefighting pumping stations and its related facilities and utilities which includes pipework and valve sizing, pump selection with head calculations, HVAC sizing, lifting equipment and filter selection, piping and mechanical equipment layout arrangement. Familiar with District Cooling Plants (DCP) and surge analysis is an add on. Responsible for the preparation of mechanical design calculations, reports and specifications. Familiar with hydraulic institution ANSI/HI standards. Attend progress and coordination meetings of the design projects and the preparation of the meeting records. Liaison and coordination with all applicable Local Authority Departments to obtain approval on design projects. Coordination with other WSP Middle East discipline Engineers as applicable for the continuity of the design projects. To be flexible to travel within the region when required to attend meetings or to take on site activities tasks of short durations. Qualifications Minimum 10 years of experience, within Middle East / KSA in a consulting firm. Must have strong technical experience in design of pumping stations, storage tanks, HVAC and surge analysis an add on with deep experience in KSA applicable standards for the relevant authorities (i.e. NWC, Ammana, SBC, KSA Civil Defense…etc.). Familiar with international standard such as Hydraulic Institution (HI), AWWA, NFPA and related industry practice regulations. Excellent communication skills to communicate effectively both orally and in writing. Thorough knowledge of current technology; must be able to select and apply appropriate engineering software for use on project. Ability to establish and maintaining effective working relationships with staff/Team. Knowledge in sewage treatment works is a plus.

Job Description WSP India is hiring for an Assistant electrical engineer. The candidate will be responsible for the production of electrical building services designs predominantly for Railway Stations and other Railway Buildings, working individually or as part of a team. Responsibilities Raise the level of technical competence within the teams. Implement delivery and quality measurement processes Promote technical excellence in all our projects. Undertake technical reviews, peer reviews, checks and contribute to the design Develop positive professional relationship with the WSP UK Team, communicating openly about project progress Participate in Project meetings, team meetings, disseminate information within the team, and communicate with other teams in WSP I Parsons Brinckerhoff Identify and act on, or refer, potential risk issues and follow in full the company commercial and contracting processes Manage delegated tasks to ensure that deadlines are met and flag resourcing concerns to team leader Complete timesheet accurately ahead of weekly deadlines Mandatory Skills The applicant will have experience in the design of Building Services designs with significant experience in a similar role or demonstration of a good track record. The applicants should possess a degree in Electrical Engineering and possess membership to an accredited engineering body i.e. MIET, CIBSE, etc. Must be good in Electrical design concepts. The applicant should have design experience. Must be aware of technical software, such as Amtech, Dialux, Relux. Should be aware of CMS calculations, Load calculations. A sound understanding of Microsoft Outlook, Word, Excel, Project is essential Must be fluent in English with an excellent understanding of technical terminology. Desired Skills Excellent working knowledge of NBC, BS, NFPA and other local codes and good working knowledge of UK codes would be advantageous Qualifications Bachelors or Masters in Electrical and Electronics Engineering

At FPC Global, we’re not just shaping the future—we’re building it. Our mission, "Building Tomorrow’s Digital Planet," reflects our unwavering commitment to transforming industries, creating smarter spaces, and driving sustainable progress. Since our founding in 2014, we have grown into a global leader with over 140 exceptional professionals, operating across the Americas, EMEA, APAC, and with our headquarters in London. We specialize in delivering integrated, cutting-edge consultancy services that span the entire facility lifecycle, ensuring that every project we undertake sets a new standard for innovation and excellence. Our business thrives on three dynamic pillars: FPC Global : Offering expert guidance in Technical Program & Project Management, Building Performance, Sustainability, and Cybersecurity, we ensure that every project succeeds and fulfills stakeholder aspirations. FPC Digital : Revolutionizing Digital Building Design and Operations, we create spaces that are not only efficient but also frictionless and forward-thinking. FPC Life Sciences : Empowering life sciences and pharmaceutical clients to deliver game-changing capital projects with precision and expertise. Job Description We’re thrilled to announce that, due to recent project wins, we have several exciting roles opening up across our team, all of which are available to start immediately We’re particularly interested in hearing from candidates with strong data center experience, so if this is your area of expertise, we’d love to connect. If you’re ready to take the next step in your career, we’d love to hear from you. The responsibilities for this role include, but are not limited to, the following: Commissioning Management: Oversee the entire commissioning process of electrical systems in datacenters, ensuring systems are installed, tested, and commissioned according to project requirements, standards, and schedules. Electrical Systems Testing & Validation: Manage the commissioning of electrical equipment, including transformers, switchgear, uninterruptible power supplies (UPS), generators, and electrical distribution panels. Project Oversight: Plan, coordinate, and lead commissioning activities, working closely with construction, engineering, and operations teams to ensure project objectives are met. Power Systems Integration: Ensure that electrical systems integrate seamlessly with mechanical, control, and IT systems, maintaining redundancy and reliability for mission-critical operations. Documentation & Reporting: Develop detailed commissioning plans, procedures, test scripts, and final handover documentation. Provide regular progress reports to project stakeholders. Compliance & Standards: Ensure all electrical systems and commissioning processes comply with relevant standards and codes (e.g., NEC, IEC, NFPA, IEEE, Uptime Institute Tier Standards, TIA-942). Factory and Site Acceptance Testing (FAT & SAT): Coordinate and lead Factory Acceptance Testing (FAT) and Site Acceptance Testing (SAT) for electrical systems, ensuring all equipment functions correctly before site integration. Risk Management & Troubleshooting: Identify potential risks or issues during the commissioning process and implement mitigation strategies. Troubleshoot and resolve technical issues to ensure the timely and safe completion of commissioning. Health & Safety Compliance: deep understanding of safety requirements working around live components , 3-phase AC Power and DC power systems. Ensure all commissioning activities comply with health and safety regulations, creating a safe working environment for all team members and contractors. Team Leadership: Lead and mentor commissioning engineers, contractors, and subcontractors, providing guidance and support throughout the commissioning process. Adhere to company policies and procedures, and promote a culture of continuous improvement and excellence. Qualifications The ideal candidate for the Commissioning Engineer position should possess the following qualifications and experience: Proven track record in commissioning electrical systems such as UPS, RMU, switchgear, generators, Transformers (CT/VT) and power distribution units (PDU) in data centres or other mission-critical environments. Technical Expertise: Strong understanding of low to medium voltage electrical systems, including power distribution, transformers, backup power systems (UPS and generators), and electrical infrastructure for data centres and large office buildings. Experience of 220 KV substation commissioning will be an added advantage. Should have knowledge of monitoring & control systems such as SCADA and Electrical Power Management System ( EPMS). Good experience of writing Testing Scripts for functional performance testing( FPT) and Integrated System Testing (IST) and leading the team to perform these tests in a datacenter. Technical knowledge and experience of commissioning Life Safety systems is desirable. Capability to review designs with commissionability perspective is essential. Software Skills: Proficiency in electrical design software (e.g., AutoCAD, ETAP), project management tools (e.g., MS Project), and familiarity with Building Information Modeling (BIM) tools. Knowledge of Commissioning Tools such as Cx Alloy, Procore, Compass and Cloud Platforms (Google, Microsoft, Amazon) and Data Analytics. Experience of Auditing an existing facility for indepth health check of installed equipment and systems. Project Management: Demonstrated experience managing commissioning schedules, budgets, and resources. Leadership & Communication: Strong leadership, organisational, and interpersonal skills is required. Ability to communicate effectively with project stakeholders, contractors, and technical teams. Problem Solving: Strong analytical and troubleshooting skills with the ability to identify and resolve issues quickly. Good experience of delivering a complete project lifecycle in the datacenter industry is a plus Essential Qualifications: Degree in Electrical Engineering ( B. Tech/ B.E. or equivalent) Minimum 8 years of hands-on experience in testing & commissioning of power supply and electrical distribution systems covering high, medium and low voltage equipment. Experience of commissioning projects in datacenter, Power Oil & Gas or any other mission critical industry. Hyderabad, India based or willing to relocate to Hyderabad. Additional Information FPC Employee Benefits: We offer a competitive salary and benefits package tailored to your role, with additional performance-based rewards. Our benefits include: Flexible and Hybrid Working Model Family Health Insurance Flexible Holidays Competitive Salaries and Discretionary Annual Bonus Scheme Professional development opportunities Why Join FPC? At FPC, we’re not just a company—we’re a thriving community where innovation flourishes, ideas are celebrated, and careers are shaped. When you join us, you become part of a dynamic team that: Shapes the Future: Work on groundbreaking projects that are redefining industries with sustainability, cutting-edge technology, and bold ambition. Supports Your Growth: From leadership training to cross-functional collaboration, we prioritize your professional development and empower you to explore new ideas, take initiative, and grow in your career. Values Balance and Inclusion: We celebrate diversity, foster collaboration, and ensure every voice is heard—while maintaining a strong commitment to work-life balance. Creates Impact: Contribute to the delivery of iconic, high-performance buildings and innovative solutions that have a lasting, positive impact on the world. Together, we’ll build tomorrow’s digital planet—and you’ll be part of something truly extraordinary.

Carry out FEED, Proposal and Detail engineering of Rotary equipment (viz,Pumps, compressors, fans, blowers, steam and gas turbines and packages) for chemical, petrochemical and refinery plants. Selection, Review of Rotating machinery in accordance to leading international, national codes and Standards such as API, ASME, ISO, ANSI and other Codes related to various rotating equipment and packages. Familiarity with material standards and specifications as well as requirements of ASME and HIS. Coordinate actively, communicate with other disciplines including static design, civil-structural, piping, electrical, instrumentation to optimise areas of interface during pre-bid and post-bid stages. Be front facing with client and engineering consultants deliver quality output on schedule. carry out discussions with client PMC independently. Preparation, Review of Mechanical Data Sheets, Material Requisition and Specifications for Rotating Equipment packages. Preparation and review of technical bid evaluation and technical recommendation for purchase. Communicate with Vendors effectively to resolve techno-commercial issues. Troubleshooting including vibration study and balancing of machines for optimal performance and longevity of equipment systems and plant etc. Prepare quick proposals for life cycle assessment and or extending life of machinery. Execute technical work for FEED/ DD within designated cost, time and resource CTR scope. Develop concept and feasibility studies, prepare quick proposals for new and modification of existing facilities for life cycle assessment / extension. Carry out detailed engineering in accordance with local, statutory compliance related to process plants with strong understanding of plant safety, implement safety in plant design, design conformance check to industry codes and standards namely ASTM/ASME/ANSI/API/NFPA/OISD/EIL/PDIL/International PMCs, EPCs and Process Licensors. Conversant with project automation database (eg smartplant), piping & Instrumentation diagram (P&ID), 2D and 3D AutoCAD and Microstation, SmartPLANT, PDS AUTOPLANT, project specific software tools. Network with experts from other institutions process licenses design consultants for problem solving in timely manner to meet project needs. Experience in participation in equipment PRT /MRT / package testing. Innovative solution provider using creativity and proven track records

Position Title: Fire Fighting Mechanical Engineer Department: MEP / Fire Protection Reporting To: Project Manager / MEP Manager Job Summary: A Fire Fighting Mechanical Engineer is responsible for the design, planning, installation, testing, commissioning, and maintenance of fire protection systems in compliance with relevant codes and standards. The engineer ensures systems are designed and executed to prevent and control fire hazards in commercial, residential, and industrial buildings. Key Responsibilities: Design & Engineering Develop fire fighting system designs based on project requirements and applicable codes (e.g., NFPA, NBC, BS). Create hydraulic calculations, system layouts, and detailed drawings. Prepare BOQs, equipment schedules, and material submittals. Project Execution Supervise installation of fire fighting systems such as sprinklers, hydrants, hose reels, fire pumps, FM-200, CO2, and foam systems. Coordinate with contractors, consultants, and other services (HVAC, electrical, civil) to ensure smooth execution. Quality Control & Compliance Ensure fire systems meet safety standards and legal requirements. Conduct site inspections, review method statements, and ensure quality of work. Perform pressure testing and flushing of pipelines. Testing & Commissioning Oversee testing, commissioning, and troubleshooting of fire protection systems. Prepare reports and documentation for system handover. Documentation & Reporting Maintain project documentation including drawings, test reports, O&M manuals. Coordinate with authorities (like Civil Defense) for approvals and inspections. Required Skills & Qualifications: Bachelor’s Degree in Mechanical Engineering. 3–7 years of relevant experience in fire protection system design and site supervision. Good knowledge of international fire codes (NFPA, FSAI, etc.). Proficiency in AutoCAD, Revit, and hydraulic calculation software (e.g., Elite Fire). Strong understanding of fire alarm integration with suppression systems. Good communication, coordination, and problem-solving skills. Job Type: Full-time Pay: ₹20,000.00 - ₹30,000.00 per month Benefits: Health insurance Schedule: Day shift Supplemental Pay: Performance bonus Work Location: In person

*FIRE ALARM TECHNICIAN (HOSPITAL) – Min 5 Years Experience* - Responsibilities: 1. Install, inspect, maintain, and repair hospital fire alarm systems following NFPA 70/72 standards. 2. Test alarms (smoke/heat detectors, panels, pull stations) and ensure systems meet safety codes. 3. Document inspections, perform emergency repairs, and coordinate with facility management. 4. Troubleshoot faults and upgrade systems as technology or regulations change. - Requirements: - Min 5 years’ experience as a Fire Alarm Technician, preferably in hospitals or healthcare. - High School/Diploma; certifications like NICET Level II/III preferred. - Hands-on skills in programming, diagnostics, repairs, and compliance with safety codes. - Ability to read blueprints/schematics and work independently. Job Type: Full-time Pay: ₹12,000.00 - ₹15,000.00 per month Benefits: Flexible schedule Experience: Fire Alarm Operator: 2 years (Required) Work Location: In person

Position: Senior Industrial Architect Place of work: Pune (India) Holtec International seeks a qualified applicant for Senior Architect’s position supporting its Civil-Structural-Architectural group within the Small Modular Reactor (SMR) Division which is designing an unfailingly safe and secure source of clean energy using nuclear fission, called the SMR-300. The position is offered by Holtec Asia as a member of the Holtec International family, a global turnkey supplier of technologies for the nuclear and sustainable energy industries. Come join a growing multidisciplinary team designing the next generation nuclear power plant. The Senior Industrial Architect would be called upon to design the architecture of metallic and reinforced concrete building structures, systems, and components (SSCs) within the SMR-300 plant. The designs will support engineering and licensing requirements, leading to the construction of SMR-300 plants across the globe. The Senior Architect must be eager to learn new skills to create feasible/practical solutions to challenging design problems. The Architect will use and learn various international building design codes and aspects of designing large industrial structures which shall be environmentally sustainable and functionally efficient with an eye towards developing and maintaining aesthetics. Minimum Technical Requirements Master’s degree in architecture, Design or related field from an accredited institution Minimum 5 years’ experience in industrial architectural design Registration with COA (Council of Architecture) Conversant with applicable building codes (e.g., IBC) and standards Extensive experience with AutoCAD, Revit, Microsoft Office and general cloud-based collaboration and communication tools Experience in producing drawings at all stages of projects and reviewing architectural drawings and documents Ability to multi-task and complete work in a timely manner with minimal supervision Display creative skills and problem-solving approach for resolving design issues Excellent technical writing and communication skills Effective interpersonal skills to collaborate with multiple disciplines Desirable Additional Qualifications Prior experience in nuclear industry Exposure to large scale fabrication and construction activities Experience in modular design and construction sequencing of industrial structures Experience in working with US and UK codes and standards pertaining to industrial architecture Specific Areas Of Responsibility Develop architectural design ideas and transform them into a buildable, sustainable, and aesthetic solution for the SSC’s being designed Prepare and review conceptual, schematic, general arrangement, design and construction drawings 3D visualization and rendering of various buildings and components using Revit Architecture Collaborate on development of comprehensive plot plan Consult with architects in US and UK to comply with the national and state level requirements Coordinate and integrate drawings with engineering inputs from various teams Produce detailed specification documents for various structures Assist in research and coordination of materials and products for project specifications and design basis documents Organizing, planning and maintaining schedules, and developing and monitoring quantity estimates and forecasts Advise Civil-Structural team regarding area grading, landscaping, surface drainage systems, etc. Advice on interfacing requirements pertaining to structural concrete and steel, HVAC ducting, plumbing, lighting fixtures, doors, windows, louvers, paint/coat material, floor finishes, partition walls, plastering, metal cladding, glazing, fire-fighting systems, false ceiling/flooring, building façade, interior work and any other specialized applications ensuring uncompromised functionality Pursue general trends in industrial architecture in combining functionality with aesthetics. Eco-friendly initiatives such as incorporating green building technology, renewable energy concepts, designing LEED-certified spaces, ensuring carbon neutrality, etc. should be considered Finalize building designs based on site data, multi-disciplinary inputs, and project requirements Review concerned engineering documents per building codes (local building byelaws, IBC, etc.), industry documents (OSHA, ADA, NFPA, etc.), and vendor provided details Prepare documents (FEED/ IDC/ AFC/ BOQ) in accordance with the document control system. As a technology trailblazer and a prominent innovator in clean energy (nuclear and solar) industry, Holtec strives to foster a meritocratic work environment conducive to continuous learning and professional growth of its associates. Holtec is an equal opportunity employer with a long-standing commitment to social equity and environmental justice. The company gives special preference to disabled veterans as a part of its recruitment policy. Detailed information on the Company can be obtained by consulting the website: www.holtec.com. Prospective candidates are invited to submit their résumé, accompanied by at least two professional references, to Careers@holtecasia.com. We are an equal-opportunity employer and welcome applications from individuals of all backgrounds, including disabled veterans.

Job Title: Senior MEP Engineer – Hospitality Projects (5-Star Hotels / Luxury Resorts)Location: SiliguriExperience Required: 10–16 Years (Hospitality Projects Only)Employment Type: Full-TimeIndustry: Real Estate & Hospitality DevelopmentEducational Qualification: B.E. / B.Tech in Mechanical or Electrical Engineering About the Opportunity We are hiring on behalf of a prestigious real estate and hospitality development firm, known for its landmark luxury hotels, resorts, and wellness retreats across India. The organization is committed to delivering high-end, guest-focused developments with top-tier construction quality and meticulous attention to detail. They are currently looking for a Senior MEP Engineer with proven experience in luxury hospitality projects to take charge of MEP execution at a flagship 5-star hotel site. Key Responsibilities Lead MEP execution of luxury hospitality projects including hotels, resorts, and wellness centers. Review and ensure compliance of all MEP drawings, technical specifications, and BOQs. Oversee on-site implementation of HVAC, Fire Fighting, Electrical, Plumbing, ELV, BMS/IBMS systems. Coordinate with consultants, architects, interior designers, and civil teams for integrated project delivery. Ensure adherence to NBC, IS codes, ASHRAE, NFPA, and relevant international standards. Prepare and manage work schedules, method statements, technical submittals, and commissioning plans. Conduct regular site inspections and resolve technical issues during execution. Implement energy-efficient, guest-centric MEP strategies to enhance comfort, safety, and sustainability. Lead testing, commissioning, and handover of services with necessary documentation and performance reports. Liaise with vendors, suppliers, and contractors for timely material delivery and execution support. Candidate Profile Must have 10–16 years of hands-on MEP experience specifically in the luxury hotel or resort sector. In-depth knowledge of hospitality-specific MEP requirements, including guest comfort systems and aesthetic integration. Strong technical expertise across all MEP domains and ability to lead execution from design stage to final commissioning. Excellent coordination, communication, and project management skills. Proficient in software tools like MS Project, Excel, and AutoCAD for scheduling and documentation. Preferred Background Candidates exclusively from hospitality project backgrounds (Hotels, Resorts, Wellness Retreats). Experience working with reputed real estate developers or hotel chains will be an added advantage. If you are passionate about delivering high-end hospitality experiences through engineering excellence, and have led large-scale MEP execution for premium hotels or resorts, we would love to connect with you.

We deliver the world’s most complex projects. Work as part of a collaborative and inclusive team. Enjoy a varied & challenging role. Building on our past. Ready for the future Worley is a global professional services company of energy, chemicals and resources experts headquartered in Australia. Right now, we’re bridging two worlds as we accelerate to more sustainable energy sources, while helping our customers provide the energy, chemicals and resources that society needs now. We partner with our customers to deliver projects and create value over the life of their portfolio of assets. We solve complex problems by finding integrated data-centric solutions from the first stages of consulting and engineering to installation and commissioning, to the last stages of decommissioning and remediation. Join us and help drive innovation and sustainability in our projects. The Role As a Mechanical Engineer with Worley, you will work closely with our existing team to deliver projects for our clients while continuing to develop your skills and experience etc. Engineering and designing of HVAC systems for petrochemical, chemical, power plants, Onshore-Substations & Control room, Industries, IT Server Rooms. Should be well versed with ISHRAE, ASHRAE, SMACNA, National Building Code (NBC), ISO, NFPA, SOLAS, DW, DNV and other relevant standards and able to design suitable and cost effective HVAC system. Review of ITB documents and prepare TQ’s & issue to Client for scope clarification. Develop HVAC systems design from concept stage after understanding functional, operational and project specific requirements. Inter-discipline co-ordination with Architect, Civil, Electrical, Instrumentation, Piping & Process for understanding project basic requirements at each engineering stage and provide inputs to disciplines. Develop basis of design, Technical specification and cost estimate document for HVAC system. Perform Heat load calculations, selection and designing of equipment, HVAC piping design, ducting design, Pipe and Duct routing, electrical power and control wiring design, HVAC space management. Ventilation calculations for various industrial applications. Develop BOQ, Material requisitions, tender specifications & drawings for the HVAC system and issuing the same for vendor offer. Technical evaluation of vendor offers and giving technical recommendations Checking and coordination of drawings and documents submitted by vendors and getting the same in line with the requirements of the project. Checking interface with other services in the plant. Site visits for coordinating site installation activities, trouble shooting and ensuring timely deliveries and drawing preparation by Vendors. Innovative thoughts and solutions combined with ability to demonstrate and convince stakeholders on proposed solutions. Engineer Shall be able to guide guide draftsman for the preparation of HVAC drawings and shop drawings (D&IDs, AFDs, GAs etc) and Review of 3D model. Prepare SOW for HVAC contractor and coordinate with HVAC vendors. Knowledge of quality aspects as per ISO 9001 is necessary. Effective verbal and written communication is necessary. Candidate shall have ability to interface with other engineering disciplines, vendors, and Clients. Willingness to travel in India and abroad. Handle one or more Projects independently. Success Criteria Timely delivery of projects with right quality, within budget and schedule. Coordinate within team and other departments and projects to minimize quality errors claims. Continuously improve methods and lessons learnt to optimize client value. Ability to quickly assess and make recommendations (rapid problem solving) regarding HVAC issues. Compliance with Worley Values. About You To be considered for this role it is envisaged you will possess the following attributes: Educational Qualification : B.E. Mechanical (from Recognized University). Experience : 6 to 10 years. Moving forward together We want our people to be energized and empowered to drive sustainable impact. So, our focus is on a values-inspired culture that unlocks brilliance through belonging, connection and innovation. We’re building a diverse, inclusive and respectful workplace. Creating a space where everyone feels they belong, can be themselves, and are heard. And we're not just talking about it; we're doing it. We're reskilling our people, leveraging transferable skills, and supporting the transition of our workforce to become experts in today's low carbon energy infrastructure and technology. Whatever your ambition, there’s a path for you here. And there’s no barrier to your potential career success. Join us to broaden your horizons, explore diverse opportunities, and be part of delivering sustainable change. Worley takes personal data protection seriously and respects EU and local data protection laws. You can read our full Recruitment Privacy Notice Here. Please note: If you are being represented by a recruitment agency you will not be considered, to be considered you will need to apply directly to Worley. Company Worley Primary Location IND-GJ-Vadodara Job Mechanical Schedule Full-time Employment Type Employee Job Level Experienced Job Posting Jul 24, 2025 Unposting Date Aug 23, 2025 Reporting Manager Title Senior General Manager

Key Responsibilities JOB DESCRIPTION Design & Engineering Leadership: Lead the electrical design for data center projects, including power distribution, UPS systems, switchgear, and backup power solutions. Develop detailed electrical schematics, single-line diagrams, and load calculations tailored to Vertiv’s data center infrastructure solutions. Integrate Vertiv products, such as Liebert, NetSure, and Avocent, into comprehensive power distribution designs. Technical Consultation & Client Interface: Serve as the primary technical consultant for clients, interpreting project specifications and aligning electrical designs with client needs. Collaborate with sales and project management teams to provide technical support during proposal development and design reviews. Coordinate with architects, structural engineers, and other stakeholders to align electrical systems with overall project scope. Compliance & Quality Assurance: Ensure all electrical systems comply with NEC, IEEE, NFPA, and other relevant standards, as well as Vertiv’s internal guidelines. Conduct design reviews, inspections, and commissioning tests to verify system integrity and operational readiness. Risk Management & Contingency Planning: Identify potential risks related to electrical infrastructure, including power failures, thermal overloads, and grounding issues. Develop and implement contingency plans to mitigate risks and ensure continuous power availability. Documentation & Reporting: Create comprehensive documentation, including technical specifications, test plans, as-built drawings, and maintenance procedures. Provide technical reports and recommendations to senior management on design optimization and risk mitigation. Training & Knowledge Transfer: Conduct training for engineering teams on Vertiv’s electrical solutions and best practices for data center design and build. Mentor junior engineers, fostering a culture of continuous improvement and innovation. Qualifications And Requirements Bachelor’s degree in Electrical Engineering or related field; Master’s preferred. 8+ years of experience in electrical design and build for data centers, with a focus on critical power systems. Extensive knowledge of Vertiv power solutions (e.g., Liebert, NetSure, Avocent) and their integration in large-scale data centers. Proficiency in AutoCAD, Revit, ETAP, and other design and simulation software. Certifications such as PE, CDCP, or Vertiv-specific training (e.g., Liebert power systems) are highly desirable. Strong project management skills, with the ability to manage multiple projects simultaneously. Exceptional problem-solving and analytical abilities, with a focus on risk management and operational efficiency. About The Team Work Authorization No calls or agencies please. Vertiv will only employ those who are legally authorized to work in the United States. This is not a position for which sponsorship will be provided. Individuals with temporary visas such as E, F-1, H-1, H-2, L, B, J, or TN or who need sponsorship for work authorization now or in the future, are not eligible for hire. Equal Opportunity Employer We promote equal opportunities for all with respect to hiring, terms of employment, mobility, training, compensation, and occupational health, without discrimination as to age, race, color, religion, creed, sex, pregnancy status (including childbirth, breastfeeding, or related medical conditions), marital status, sexual orientation, gender identity / expression (including transgender status or sexual stereotypes), genetic information, citizenship status, national origin, protected veteran status, political affiliation, or disability.

Mechanical / Electrical Design Engineer Mechanical Design Engineer: Key Responsibilities: Prepare and validate mechanical design calculations (such as HVAC load, duct/piping sizing, pump/fan selection) based on project requirements and applicable codes. Develop and review technical drawings, schematic diagrams, and detailed design documentation such as DBRs, equipment schedules, and specification sheets. Develop fire protection system layouts, hydraulic calculations, and equipment selection using specialized tools such as Elite Fire, HASS, or equivalent. Ensure all designs comply with international standards and codes such as ASHRAE, ISHRAE, NFPA, and IPC. Select mechanical systems and equipment by analyzing performance data, manufacturer specs, and regulatory compliance. Interpret project inputs and prepare Input Request Sheets and RFIs to clarify design scope, resolve ambiguities, and avoid rework. Coordinate with architectural, structural, and other MEP disciplines for spatial validation and system integration. Support preparation of BOQs and technical documentation required for procurement and construction. Assist in clash detection analysis and resolution in collaboration with BIM modelers. Contribute to the development of standard templates, calculation tools, and automation scripts to improve design efficiency. Participate in internal reviews, technical meetings, and ensure timely delivery of design milestones. Stay updated on latest technologies, industry practices, and engage in continuous professional development. Required Skills & Qualifications: Proficiency in mechanical system design, including HVAC, WS/PL, and fire protection. Familiarity with plumbing system calculations (pressure drop, pipe sizing, slope gradients) and water tank sizing techniques. Proficient in engineering software tools such as HAP, TRACE, Carrier E20-II, and MS Excel-based design templates. Working knowledge of AutoCAD and basic familiarity with Revit and Navisworks for design coordination. Ability to read and interpret architectural and structural drawings. Understanding of energy efficiency strategies, ventilation codes, and fire safety requirements. Capable of preparing structured documentation including DBRs, SLDs, calculation sheets, and technical submittals. Knowledge of common design and construction workflows in building services. Effective communication skills for technical reporting and coordination. Analytical thinking to identify potential risks and recommend practical solutions. Adaptability and willingness to adopt new tools and standards. Collaborative mindset and ability to work closely with modeling and site execution teams. Education & Experience: Diploma/Bachelor of Engineering in Mechanical. Should possess 2 to 10 years of experience in Mechanical Design, specifically within the building services domain. Proficiency in AutoCAD. Strong understanding of international and Gulf-region mechanical design standards and codes. Experience in, US/UK, Gulf Projects and other international projects. Electrical Design Engineer: Key Responsibilities: Assist in the preparation of project proposals and cost estimates. Develop detailed electrical designs for building services including power distribution, lighting, emergency systems, and ELV (fire alarm, telecom, CCTV). Prepare electrical drawings, single-line diagrams, load calculations, and panel schedules using Revit MEP and AutoCAD. Collaborate with architects, engineers, and other stakeholders to ensure integrated and coordinated designs. Ensure designs adhere to applicable codes such as NEC, IEC, IEEE, NFPA, and local authority standards (e.g., DEWA, SBC). Review project specifications and ensure accurate documentation and deliverables. Participate in project meetings and provide technical support throughout the project lifecycle. Conduct technical analysis and problem-solving to support project delivery. Maintain attention to detail and high-quality output in all design phases. Required Skills & Qualifications: Experience with ETAP or similar electrical analysis tools. Familiarity with lighting design software (Dialux/Relux). Proficiency in Revit MEP, AutoCAD, and Navisworks. Strong understanding of international and Gulf-region electrical design standards and codes. Excellent communication, analytical, and organizational skills. Ability to work independently and collaboratively within a team environment. Education & Experience: Diploma/Bachelor of Engineering in Electrical. Should possess 2 to 10 years of experience in Electrical Design, specifically within the building services domain. Proficiency in AutoCAD. Strong understanding of international and Gulf-region electrical design standards and codes. Experience in US/UK, Gulf Projects and other international projects. ABOUT CONSERVE: Group Established in 2016 in Qatar, to serve the Construction Sector with Engineering Design Support Services to companies in Asia, Middle East, Europe, Australia, Canada, US and other parts of the world, we are an exponentially growing engineering company with 600+ People across the globe. Conserve provides wide range of services for green building and MEP solutions. Engineering design and support such as Architectural drawings, Structural drawings, MEP, BIM modeling, CAD services and 3D scanning. Sustainability such as LEED services, GSAS services, Energy services, CXA commissioning, Environmental services, Acoustical services, CEEQUAL consultancy services and BREEAM. Simulation and analysis such as Simulation engineering, Structural analysis, Stress analysis, Surge analysis, Computational fluid dynamics, detailed engineering services and Building envelope design and simulation. Thermal Imaging – Infrared Thermography.

Opening in One Of The Most Reputed OIL & GAS Company in Middle East: Position: Process Engineer - Delayed Coker (Thermal Cracking-Vibreaker) Qualification: Minimum of 15 years of experience across the refinery and/or petrochemical industry, with at least 10 years of hands-on experience in delayed coker/visbreaker specialty. Minimum Requirement: Bachelor's Degree in Chemical Engineering or a related field. An advanced degree is preferred. Minimum of 15 years of experience across the refinery and/or petrochemical industry, with at least 10 years of hands-on experience in delayed coker/visbreaker specialty. Demonstrated ability to optimize delayed coker/visbreaker operations , with specific examples of performance improvements achieved. Comprehensive knowledge of delayed coker/visbreaker processes, equipment, and systems in refining and petrochemical industries. Deep understanding of ASME Section VIII Divisions 1 & 2, ASME Section I, API-530, API-535, API-537, API-560, API-579, API-936, and NFPA standards applicable to fired equipment. Significant experience in inspection and failure analysis of delayed coker/visbreaker equipment. Proficiency in basic and advanced NDE techniques related to delayed coker/visbreaker equipment. Expert knowledge of remaining life calculations for heater tubes and refractory design and repair. High level of proficiency in using software tools related to delayed coker/visbreaker engineering and design, such as Aspen Hysys, ANSYS, and HTRI. ----------------------------(Looking for B.Tech & B.E Candidates)-------------------------------------- **You Can Apply Directly or Share your Updated CV on Salman@sofomation.com**

Job Summary: We are looking for a qualified and detail-oriented Remote Plumbing and Firefighting Design Engineer to join our design team. The engineer will be responsible for the design and coordination of plumbing and fire protection systems for various building types, ensuring compliance with international standards. The position is fully remote and requires strong technical skills, proficiency in design tools, and the ability to communicate effectively with multidisciplinary teams. Key Responsibilities: Plumbing Design: Design systems including cold & hot water supply, drainage, sewage, stormwater, and greywater. Sizing of pipes, pumps, and tanks using appropriate hydraulic calculation methods. Prepare isometric and schematic drawings, riser diagrams, and equipment schedules. Coordinate with mechanical, electrical, and architectural teams to integrate plumbing systems. Firefighting Design: Design of fire protection systems including: Wet riser, sprinkler, and standpipe systems Fire hose reels and extinguishers Fire pump sizing and configuration Perform hydraulic calculations and select components according to NFPA or equivalent standards. Develop fire protection layouts, zone diagrams, and system schematics. General: Prepare detailed drawings, BOQs, specifications, and technical reports. Ensure designs meet applicable codes (NFPA, IPC, UPC, ASHRAE, local regulations, etc.). Coordinate with clients, consultants, and contractors via virtual meetings. Review shop drawings, material submittals, and respond to RFIs remotely. Provide design revisions based on project feedback and site conditions. Requirements: Bachelor’s degree in Mechanical Engineering or a related field. 8-10 years of experience in plumbing and firefighting system design. Proficient in AutoCAD, Revit, and calculation tools (e.g. Elite Fire, HASS, or Pipe Flow Expert). Strong knowledge of international plumbing and fire codes. Experience in remote collaboration and document sharing platforms (e.g. MS Teams, BIM 360, Asana). Excellent communication and time management skills. Job Type: Full-time Application Question(s): Do you have experience in engineering consultation companies? Do you have experience using Revit? What is your ability to join? What is your current salary? What is your expected salary? Education: Bachelor's (Required) Experience: Plumbing and firefighting: 8 years (Required)

Job Summary: The Technician is responsible for the installation, inspection, testing, servicing, and maintenance of Fire Hydrant Systems and other water-based fire suppression systems in commercial, industrial, and institutional facilities. The role ensures that all systems comply with relevant fire safety codes, standards, and client requirements. Key Responsibilities: Installation & Commissioning: Install fire hydrant lines, sprinkler systems, valves, pipes, and associated components. Assist in laying underground and overhead pipelines and fitting hydrant accessories. Commission new fire hydrant systems and ensure proper system functionality. Maintenance & Servicing: Perform routine maintenance and pressure testing of fire hydrants and sprinkler systems. Identify and rectify leaks, corrosion, damaged valves, or non-functional components. Check water pressure and flow adequacy from hydrants and pumps. Inspection & Testing: Conduct regular inspections and functional tests as per NFPA, IS codes, and local fire authority guidelines. Keep detailed records of system performance, faults, and service history. Troubleshooting & Repairs: Diagnose faults and malfunctions in hydrant and sprinkler systems. Replace faulty parts such as control valves, couplings, hoses, and sprinkler heads. Coordination & Compliance: Coordinate with safety officers, project engineers, and fire department officials during audits and system upgrades. Ensure systems are compliant with fire safety standards and local regulations. Documentation & Reporting: Maintain service reports, inspection checklists, and client sign-offs. Report critical faults or emergencies promptly to supervisors or safety managers. Skills & Qualifications: ITI / Diploma in Mechanical / Fire & Safety / Plumbing or equivalent. 2–5 years of relevant field experience in fire hydrant and suppression systems. Sound knowledge of fire safety standards (IS 3844, NFPA 25, etc.). Ability to read plumbing/fire layout drawings and system schematics. Familiarity with tools, pipe threading, welding, and pressure gauges. Physically fit, with ability to work in varied site conditions. Other Requirements: Willingness to travel to multiple sites/branches. Adherence to safety protocols and PPE usage. Basic communication and record-keeping skills. Job Types: Full-time, Permanent Pay: ₹15,000.00 - ₹20,000.00 per month Experience: total work: 2 years (Preferred) Work Location: In person

Hello, I’m currently hosting an exciting opportunity for a Sr. Piping Engineer role! If you're open to new possibilities or just curious to learn more, I’d love to share the details with you. Feel free to reach out or apply directly—I'd be happy to connect and discuss how this could align with your goals. Looking forward to hearing from you! Location-Thane, Kolshet Road. Preferred Industry - Shipping , Oil & Gas About the company :- 21 Knots is a design, engineering, and consulting firm providing services to the global maritime and oil & gas industry. In an industry constantly changing due to dynamic regulations, economic fluctuations, and climate change mandates, we strive to provide cutting-edge solutions with a strong commitment to excellence. Our comprehensive services are designed to create value for our esteemed clients while enabling them to achieve their business goals. The Role We’re looking for a Sr. Piping Engineer with experience in marine and offshore engineering systems. The selected candidate will support the Team Lead in carrying out engineering and design-related activities. He/she shall contribute to the design of high-quality piping systems - P&ID creation, engineering calculations, as well as supporting drafting activities using AutoCAD and other design and analysis tools. This role is an excellent opportunity for a skilled engineer to contribute to high-impact new builds and retrofit projects in the maritime and offshore sector. Responsibilities Carry out engineering calculations and prepare technical reports related to marine piping systems Prepare high quality P&IDs, Machinery Layouts, Equipment Installation Plans, Drawings , etc. Ensure all piping designs meet vessel specifications, functional requirements, and classification society standards Review vendor equipment drawings, technical datasheets and ensure alignment with project specifications Perform system analyses to establish pressure drop, flow rate, heat balance, ventilation and pipe stress Assist team lead to prepare material take-offs, weight calculations and ensure cost-effective designs Review 2D drawings/3D models for various piping designs and layouts Provide support in drafting activities using AutoCAD and assist in other related design tasks Collaborate with the design team to ensure compliance with project standards and timelines What You’ll Need Experience: Minimum of 5 years of experience in marine and oil & gas projects Familiarity with piping design principles and standards in the marine and offshore industries Education: B.E. / B.Tech. Mechanical from a recognized institution. Tools & Software Proficiency: Proficiency in AutoCAD Experience in industry-standard analysis software for piping design viz. Pipeflow / Pipenet / FloMASTER etc. Ability to operate 3D design tools effectively Skills & Competencies: Knowledge of piping codes and standards including ASME B31.1, B31.3, B31.4, B31.8 , API, NFPA, IBR Good written and verbal communication skills Strong understanding of piping design principles Ability to prepare high-quality design drawings and documentation Detail-oriented with strong problem-solving skills Good communication skills and ability to collaborate with cross-functional teams.

Build your best future with the Johnson Controls team As a global leader in smart, healthy, and sustainable buildings, our mission is to reimagine the performance of buildings to serve people, places and the planet. Join a winning team that enables you to build your best future! Our teams are uniquely positioned to support a multitude of industries across the globe. You will have the opportunity to develop yourself through meaningful work projects and learning opportunities. We strive to provide our employees with an experience, focused on supporting their physical, financial, and emotional wellbeing. Become a member of the Johnson Controls family and thrive in an empowering company culture where your voice and ideas will be heard – your next great opportunity is just a few clicks away! What We Offer Competitive salary Paid vacation/holidays/sick time On the job/cross training opportunities Encouraging and collaborative team environment Dedication to safety through our Zero Harm policy What You Will Do This position is responsible to design Fire protection & Suppression per respective account standards. How You Will Do It Prepare designs on given floor plans to arrive with the BOQ; in case BOQ is unavailable. Identify potential issues/risks and proactively bring them to the customer's knowledge and help to mitigate the identified risks. Initiate the discussion with OEMs & subcontractors and get the right solution and proposal from OEMs. Align with Organization KPIs such as Quality, Cycle Time, OTD, Win rate, Productivity, etc. Adherence with all processes and guidelines to execute project within timeline What We Look For ME/BE/Diploma (Mechanical / Electrical) Must have 5-12 years of relevant experience in Fire Protection & Suppression Systems domains. Strong knowledge of Fire Protection & Suppression Systems (Fire Sprinkler, Pre-action system, Water spray, standpipe & hose system, Hydrant network, Fire water storage, Stationary pumps, Foam suppression, water mist system, Kitchen hood system, Gas Suppression – FM, Novec, Inergen & Co2 etc.). Knowledge in Building Management System will be added advantage for the role. Must have India projects' presales and estimation experience on various verticals (Transportation, Data Center, Commercial, Fit-outs, Industries, Data Centers, etc.). Capable of perform hydrant and flow calculation and doing product selections along with the deviation/compliance statements. Must be able to work on complex costing sheets covering Material, Engineering, Operations, and Subcon costs. Skill in articulating offered solutions in a structured way through high-standard technical proposal documents. Must have a strong network with the 3rd party vendors in India. Must be a quick learner & keen on problem-solving techniques. Proficient in written and verbal communication. Must be a good team player. Preferred Experienced in designing Fire Protection & Suppression systems (fire hydrant, sprinkler, HVWS, MVWS, Foam, Water Mist, Gas Suppression) per NFPA, TAC, and NBC norms. Proficient in hydraulic and flow calculations using SprinkCAD, Fire-CAD, ANSUL, and HYGOOD. Preparing the bill of quantity (BOQ) & material track sheet as per approved / shop drawings and material technical data sheet. Coordination with consultants / clients for contractual clarifications and to get the approval of design. Knowledge of ACAD, Visio, and Excel. Johnson Controls is an equal employment opportunity and affirmative action employer and all qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, age, protected veteran status, status as a qualified individual with a disability, or any other characteristic protected by law. For more information, please view EEO is the Law. If you are an individual with a disability and you require an accommodation during the application process, please visit www.johnsoncontrols.com/tomorrowneedsyou

Job Description: CCTV Engineer – CCTV, FAS, IDS, ACS Position Title: CCTV Engineer Department: Services Location: Pune, Maharashtra Reports To: Technical Manager / Service Manager Employment Type: Full-Time Job Summary: We are seeking a skilled and customer-focused CCTV Engineer to provide expert-level support for CCTV, Fire Alarm Systems (FAS), Intrusion Detection Systems (IDS), and Access Control Systems (ACS). The candidate will be responsible for troubleshooting, system diagnostics, installations, maintenance, and technical consultation for our clients and internal teams. Key Responsibilities: Provide remote and on-site technical support for CCTV, FAS, IDS, and ACS systems. Troubleshoot and diagnose hardware, software, network, and system issues. Conduct system installations, upgrades, testing, and commissioning. Perform preventive and corrective maintenance services. Respond to service requests and technical inquiries within SLA timeframes. Guide customers through step-by-step solutions and provide training as needed. Coordinate with vendors and third-party suppliers for advanced troubleshooting. Document service activities, solutions, and technical findings accurately. Collaborate with project teams on system designs and technical solutions. Stay updated with the latest technologies and product updates in the security systems field. Qualifications and Skills: Bachelor’s Degree/Diploma in Electronics, Electrical, IT, or a related technical field. 2+ years experience in supporting CCTV, FAS, IDS, and ACS systems. Hands-on experience with brands like Hikvision, Dahua, Honeywell, Bosch, SPECTRA , HID, Tyco GST UNV ,RAVEL - etc. Good understanding of TCP/IP networking, cabling, IP configurations, and troubleshooting. Familiarity with relevant industry standards (NFPA, SIRA, UL, etc.) is a plus. Ability to read and interpret technical manuals, blueprints, and wiring diagrams. Excellent problem-solving, analytical, and communication skills. Ability to work independently and manage multiple tasks. Willingness to travel to customer sites when needed. Job Type: Full-time Pay: ₹15,000.00 - ₹40,000.00 per month Benefits: Provident Fund Schedule: Day shift Work Location: In person Application Deadline: 30/07/2025 Expected Start Date: 24/07/2025

POSITION: AutoCAD Draughtsman - ELV / ELECTRICAL EXPERIENCE: Minimum 3 Years LOCATION: Calicut, Kerala JOB SPECIFICATIONS: • Diploma or bachelor’s degree in electrical / Electronics / Telecommunication Engineering or equivalent. • Minimum 2 years of hands-on experience in preparing ELV system shop drawings. • Strong proficiency in AutoCAD (2D essential, 3D preferred). • Sound knowledge of ELV systems: CCTV, Access Control, Fire Alarm, Public Address, Structured Cabling, BMS, and related technologies. • Familiarity with MEP coordination drawings, architectural layouts, and civil drawings. • Ability to interpret design documents, tender drawings, specifications, and BOQs. • Understanding of international standards for ELV drawings (e.g., NFPA, BICSI, BS, IEC). • Attention to detail and accuracy in drawing and documentation. • Effective communication and coordination skills with design, site, and consultant teams. • Ability to meet tight deadlines and handle multiple projects simultaneously. DUTIES AND RESPONSIBILITIES: Preparation of Shop Drawings • Produce accurate, coordinated, and detailed ELV shop drawings based on design drawings, project specifications, and consultant requirements. • Interpret design inputs, schematic diagrams, and technical documents and translate them into high-quality AutoCAD drawings. 2. As-Built Drawings and Revisions • Prepare as-built drawings based on redline mark-ups provided by the site engineers. • Incorporate site modifications and feedback from consultants and contractors. 3. Drawing Management • Maintain drawing logs and revision control sheets. • Organize drawing sheets according to submission standards and ensure proper layering, annotation, and title blocks. 4. Coordination and Clash Avoidance • Coordinate ELV drawings with architectural, structural, and other MEP disciplines. • Identify and resolve clashes or spatial issues in layouts before site execution. 5. Documentation and Schedules • Assist in creating: o Cable routing plans o Riser diagrams o Device layout plans o Panel connection diagrams o Cable schedules o Legends and symbols 6. Drawing Standardization and Libraries • Develop and maintain a standard block and symbol library for recurring ELV components. • Follow company drafting standards and assist in standardization of CAD practices. 7. Reporting and Support • Provide regular updates on drawing status to project engineers. • Ensure timely submission of drawings for approval and construction phases ABOUT US Technical Xperts Group (TXG) is an international technology resource provider with strong technical expertise and over a decade of experience. TXG is a venture of experts in engineering, design, communication, and management who have created histories in building the world’s best and most renowned landmarks. TXG is committed to delivering solutions and services for leading companies worldwide. We provide comprehensive engineering solutions, including architectural, Structural, MEP, and ELV services. Our BIM and CAD services have a vast area of experience in every aspect of BIM and CAD operations, offering an unparalleled quality standard of flexibility and services. These services include BIM services, BIM Engineering services, BIM consulting services, and CAD drafting services. The values we uphold are Quality, Teamwork, Precision, Excellence, Commitment, and Integrity. TXG is at the forefront of engineering, design, communication, and management. We are dedicated to creating the world's best and most admired landmarks. We are currently active in India, the UAE, and the Kingdom of Saudi Arabia (KSA). For more details, visit our website www.txglive.com

We are Hiring Electrical Design Engineer!! Join us and become a part of a transformative Team!! 🎓 Education: B.E Electrical Engineering or similar. 💼 Experience: 3-8 years 📍 Location: Hosur, Tamil Nadu, India (Work from Office) 🕒 Employment Type: Full-Time 📅 Workdays: 5 working days No.of Openings: 3 ** Candidates who are willing to consider relocation to Hosur are encouraged to apply. ** Main Duties and Responsibilities · Work in the areas of water systems and treatment plant electrical evaluation, modelling and design, master planning and project delivery. · Design electrical systems and role out plans for typical applications being data centres, medical water systems, municipal, industrial, Pharma, and recycling water systems with payback evaluations. · Coordinating and adjusting the work effort within the project team to ensure project work is completed on schedule and within allocated budget. · Designing electrical systems and developing electrical schematics, single line diagrams (SLDs), load calculations, cable sizing, earthing and lightning protection systems, control panel layouts, motor control centers (MCCs), power control centers (PCCs), Variable Frequency Drives (VFDs), Programmable Logic Controller (PLC) panels, conduit routing, and wire schedules. · Coordinating with other engineering disciplines (process, mechanical, civil, instrumentation) to ensure integrated design and smooth project execution. · Preparing detailed technical specifications, datasheets, Bills of Quantities (BOQs), and reports for procurement and construction. · Reviewing vendor documents, ensuring compliance with specifications, and providing technical support during procurement and installation. · Ensuring all electrical designs adhere to relevant national and international standards like IS/IEC, NFPA, IEEE, NEC, UL, CSA, NFA. · Providing support during installation, testing, and commissioning phases, and troubleshooting electrical issues. · Identifying and proposing cost-saving measures and working within project timelines and budgets. · Exploring and implementing new technologies to improve system efficiency, reliability, and sustainability. · Promoting and enforcing safe working practices and adhering to HSE regulations and industry standards. · Industrial plants use high-power machinery, requiring specifically designed electrical systems to handle the load without compromising safety or continuity. · Seamless integration with control systems, automation technologies like programmable logic controllers (PLCs), and robotics to streamline production processes. · Strong understanding of electrical power systems, control systems, instrumentation, and automation, preferably within the water treatment industry. Required Experience & Qualifications: · Degree or equivalent qualification in Electrical Engineering Minimum 3 years’ Experience in designing electrical systems is essential with design emphasis on the Data Centre, Industrial, Municipal and Pharma sectors being an advantage · Software Proficiency: Electrical design tools (e.g., ETAP, Power Factory) · Strong communication skills as the position will require presentations to clients. · Must exhibit strong project management skills. · Experience working in a multi-disciplinary team in developing conceptual, feasibility, and final designs for a wide variety of water treatment projects. · Familiarity with relevant electrical codes, standards, and regulations. · Ability to analyse complex electrical system requirements, perform calculations, identify potential issues, and propose effective solutions. · Strong detail-oriented work style, and an accommodating and proactive attitude. Experience with CAD software (e.g., AutoCAD, Revit, MicroStation) would be advantage Professional Engineer (PE) license or equivalent certification is an added advantage. Share your updated resume to hr@ses-td.com

Job Title: HVAC System Design Engineer Department: Engineering / Projects Reports To : Design Manager Location : Nagpur Job Type: Full-time/Permanent Job Purpose: To design, develop and optimize HVAC systems for commercial, industrial and infrastructure projects, ensuring compliance with project requirements, codes and standards. The HVAC Design Engineer will play a key role in delivering technically sound, cost-effective and energy-efficient HVAC solutions as part of EPC contracts. Key Responsibilities:  1. HVAC System Design & Engineering • Perform load calculations using software like HAP, TRACE 700 or Carrier E20, DSB. • Design HVAC systems including chilled water, VRF/VRV, DX systems, ventilation and exhaust systems. • Equipment selection (chillers, AHUs, FCUs, pumps, ducts, fans, etc.) based on project specs and technical performance. • Prepare HVAC layout drawings, schematics and coordination drawings using AutoCAD / Revit. • Ensure design compliance with relevant codes (ASHRAE, SMACNA, ISHRAE, NBC, etc.). 2. Technical Documentation & Submittals • Prepare and review technical documents: BOQs, data sheets, design basis reports, system descriptions and method statements. • Prepare and submit technical submittals for client/consultant approval. • Interface with vendors and suppliers to evaluate technical offers and support procurement. 3. Coordination & Project Interface • Coordinate with electrical, plumbing, fire protection and civil teams to resolve interdisciplinary design clashes. • Liaise with project managers and site teams during the design and execution phases. • Support pre-sales and estimation teams with HVAC system sizing and cost inputs during bidding. 4. Site & Execution Support • Provide technical support during construction, including shop drawing reviews, site visits and resolving design & site related queries. • Participate in testing, commissioning and handover activities, including witnessing functional and performance tests. Qualifications & Experience: • Bachelor’s Degree (preferred) Or Diploma in Mechanical Engineering • 3–10 years of experience in HVAC design, preferably with an EPC contractor or MEP consultant. • Proficient in HVAC design software (e.g., HAP, AutoCAD, Revit MEP). • Working knowledge of codes and standards (ASHRAE, ISHRAE, NFPA, LEED, etc.). • Familiarity with BIM workflows is an advantage. • Experience in energy modeling and green building compliance (preferred but not mandatory). Key Skills: • Strong technical and analytical skills. • Proficiency in design and drafting tools. • Effective communication and report-writing skills. • Ability to multitask and meet tight deadlines. • Team player with coordination and leadership abilities. Desirable Certifications: • LEED Green Associate / AP. • ISHRAE/ASHRAE membership or certifications. • Certification in HVAC Design from a reputed institute. Kindly share your resume at HR@transcendencelearning.co.in

Experience in Process and Technical Safety field for plants such as Refinery, Fertilizers, Petrochemicals, Oil & Gas, Chemicals, Off-Sites and Utility facilities. Candidate must have experience of around 4 to 6 - EPC / EPCM in green field/brown field and revamp type project. Experienced as facilitator in Safety study. Understanding P&ID with respect to various equipment, piping, instruments & process. Reviewing P&ID from safety prospective, understand logic and interlocks with respect to various system and provide relevant comments to the design team during various project reviews. Knowledge on HSEIA & HSE studies - (i.e. HAZOP, HAZID, SIL, LOPA, QRA, SIMOPS, DERA, Bow-Tie- Analysis, What-if Analysis, EIA, HSECES PS, FEHA, FMEA, H2S Zoning Study, EERA, ESSA, F&G mapping study, Noise Study & etc.) Identifying problems and shortcomings with existing systems. Co-ordinating testing and commissioning activities and providing advice on testing and commissioning procedures and documentation. Producing or assisting in the preparation of all pre-commissioning, commissioning, testing and performance guarantee related procedures & documentation & their Approvals. Undertaking testing and commissioning activities in line with the specified site requirements. Monitoring progress, recording all test results. witnessing final testing and acceptance of equipment and compilation of all documentation for inclusion in the site test dossier. Ensuring the safe testing and commissioning of completed installations to achieve the necessary plant performance in accordancewith project programme requirements. Knowledge about the various process equipments, utility equipments (i.e. compressor, chiller, steam, pump & etc.) and its operation and expected hazards during operation. Experience in hazard identification (HAZID) and protective device sizing with respect to various processes. Knowledge about Pre-Commissioing, start-up, commissioing of the Plant. Demonsrtration of the Performance Guarantee fo the process equipment. utility equipment (i.e. compressor, chiller, steam, pump & etc.) and its operation and expected perfomance shortcomings during operation. Experience in starting up the process plant. Ability to start-up, runing plant in various operating conditions, handle - upset and planned/emergency shutdown conditions. Capable for the Plant Loss Prevention deliverables: Knowledgee about relevant code & standards (NFPA, OISD, IEC, IS, IP, PESO & etc.). Fire Protection and F&G detection design basis,Fire & Gas detection systems including Fire & Gas Detection layouts and Fire & Gas Cause and Effect Charts. Passive Fire Protection Design including Passive Fire Proofing (PFP) Schedule and PFP Layouts. Hazardous Area Classification Design including Hazardous Area Classification (HAC) Schedule and HAC Layouts. Experience in the preparation of Process datasheets for various safety items like PSV, PVVV, Flame arrestor, Cross functional Competence requirement for understanding of Inputs and interface with various disciplines Project management, Planning, Civil, Electrical, Instrumentation, Mechanical & Process. Independently handle safety workshops uing PHA Pro, PIPENET & etc. Continuous learning capture for ongoing enquiries, ongoing projects and build inhouse Pre-bid and detail engineering capability. Capturing the Project learning in the knowledge bank in the KM Portal. Conduct Knowledge Sharing sessions to impart learning and share the lessons learned.

Build your best future with the Johnson Controls team As a global leader in smart, healthy and sustainable buildings, our mission is to reimagine the performance of buildings to serve people, places and the planet. Join a winning team that enables you to build your best future! Our teams are uniquely positioned to support a multitude of industries across the globe. You will have the opportunity to develop yourself through meaningful work projects and learning opportunities. We strive to provide our employees with an experience, focused on supporting their physical, financial, and emotional wellbeing. We are a Great Place To Work-Certified organization. Become a member of the Johnson Controls family and thrive in an empowering company culture where your voice and ideas will be heard – your next great opportunity is just a few clicks away! What we offer: Competitive salary Paid vacation/holidays/sick time On the job/cross training opportunities Encouraging and collaborative team environment Dedication to safety through our Zero Harm policy What you will do This position is responsible to design Fire protection & Suppression per respective account standards. How you will do it Prepare designs on given floor plans to arrive with the BOQ; in case BOQ is unavailable. Identify potential issues/risks and proactively bring them to the customer's knowledge and help to mitigate the identified risks. Initiate the discussion with OEMs & subcontractors and get the right solution and proposal from OEMs. Align with Organization KPIs such as Quality, Cycle Time, OTD, Win rate, Productivity, etc. Adherence with all processes and guidelines to execute project within timeline What we look for ME/BE/Diploma (Mechanical / Electrical) Must have 8-14 years of relevant experience in Fire Protection & Suppression Systems domains. Strong knowledge of Fire Protection & Suppression Systems (Fire Sprinkler, Pre-action system, Water spray, standpipe & hose system, Hydrant network, Fire water storage, Stationary pumps, Foam suppression, water mist system, Kitchen hood system, Gas Suppression – FM, Novec, Inergen & Co2 etc.). Knowledge in Building Management System will be added advantage for the role. Must have India projects' presales and estimation experience on various verticals (Transportation, Data Center, Commercial, Fit-outs, Industries, Data Centers, etc.). Capable of perform hydrant and flow calculation and doing product selections along with the deviation/compliance statements. Must be able to work on complex costing sheets covering Material, Engineering, Operations, and Subcon costs. Skill in articulating offered solutions in a structured way through high-standard technical proposal documents. Must have a strong network with the 3rd party vendors in India. Must be a quick learner & keen on problem-solving techniques. Proficient in written and verbal communication. Must be a good team player. Preferred Experienced in designing Fire Protection & Suppression systems (fire hydrant, sprinkler, HVWS, MVWS, Foam, Water Mist, Gas Suppression) per NFPA, TAC, and NBC norms. Proficient in hydraulic and flow calculations using SprinkCAD, Fire-CAD, ANSUL, and HYGOOD. Preparing the bill of quantity (BOQ) & material track sheet as per approved / shop drawings and material technical data sheet. Coordination with consultants / clients for contractual clarifications and to get the approval of design. Knowledge of ACAD, Visio, and Excel.