1215 Mep Jobs - Page 30

Role & responsibilities To understand and practice the Design standards, Service and Operating standards, ethos and philosophy of the brand for projects. To understand the TA agreement (Technical Services Agreement) for managed projects. Follow strict adherence to the operators obligations mentioned in TA agreement. To follow specific brief for a project and conduct back ground research on climatic, geographical, social, cultural and market dynamics to evolve an area brief suitable to a particular project. Research globally and within the country, to identify and recommend consultants, i.e., the architects and interior designers most suited to a particular project considering their area of expertise, past experience, evaluation of their works with their location. Assist in formulating the scope, deliverables, contractual liabilities, calculation of consultants fees including stages of payment and validate consultants fee claims against deliverables at each stage of the project. Follow the given qualitative and quantitative brief and guide the external consultants to deliver a design in line with the brands expectations, budget, climatic conditions and other relevant aspects. Organize and attend design co-ordination meetings as necessary and oversee co-ordination and incorporation of all important disciplines such as MEP, lighting, landscape, FF&E etc., to deliver a world class projects. Continue to oversee the consultants work until completion. To check the external consultants to provide information on local bye-laws, local and national codes, FSI calculations, prevalent fire norms and any other statutory information necessary for approval of the design by the competent authorities. Continue surveillance to ensure compliance to the norms at all times till approval/completion is achieved. To research and identify, architect on record and super-wise submission drawings to ascertain their full adherence to all the prevailing laws. To continue to oversee the entire process through all departments such as municipal bodies, fire department, department of Forest and environment etc. to ensure timely approvals. To identify and recommend as needed, a Project Management Company to manage the projects after conducting due diligence on their profile, past performances and projects finished. To check budgets, tenders, bill of quantities, analysis of rates, comparative statements, negotiations and award of work to most suitable contractors after verifying their ability to deliver highest quality work in the given time frame. Participate in cost value engineering exercises with the consultants and contractors as necessary. To conduct periodic supervision to the project site and vendors work places as necessary to ensure proper adherence to quality, specifications, workmanship and timelines to complete the projects. The incumbent would be an integral part of the project development team and shall share, consult, discuss all aspect of the design process with the team as needed to achieve prime objectives. Endeavour to improve standards of designs by innovating and being well versed with the latest global trends. Preferred candidate profile 15 to 18 years of experience in hospitality design. Prior experience of working with luxury hotel chains or renowned architectural design practices. Well-rounded experience in Master planning, architecture, coordination of landscape design, interior design, lighting design, coordination with MEP, back of house design etc

Role & responsibilities Quality Management System (QMS) Implementation: Develop, implement, and maintain the QMS for electrical systems, ensuring compliance with national and international standards. Inspection and Testing: Oversee the inspection and testing of electrical installations, including signaling, power supply, and communication systems, to ensure they meet design specifications and quality standards. Non-Conformance Management: Identify, document, and manage non-conformances, implementing corrective and preventive actions as necessary. Documentation Control: Ensure all quality-related documentation, such as test reports, inspection records, and compliance certificates, are accurately maintained and readily accessible. Supplier and Subcontractor Evaluation: Assess and monitor the performance of suppliers and subcontractors, ensuring they adhere to quality requirements. Training and Development: Provide training to project teams on quality standards, procedures, and best practices to foster a quality-centric culture. Audit and Compliance: Conduct regular internal audits and support external audits to ensure ongoing compliance with quality standards and regulations. Preferred candidate profile Education: Bachelor's or Master's degree in Electrical Engineering or a related field. Experience: Minimum of 8TO 10 years in quality assurance and control roles within large-scale infrastructure projects, preferably in metro rail or railway systems. Certifications: ISO 9001 Lead Auditor certification; additional certifications in quality management systems or project management are advantageous. Skills: Strong analytical and problem-solving skills, excellent communication abilities, and proficiency in quality management software and tools.

Managed and monitored scope, schedule, quality assurance, and delivery of construction project. Conducted pre-construction meetings with Client, contractors, engineers, and architects. Prepared project construction schedules. Electrical equipment Installation and Bus Duct System Testing, Commissioning and Handover. Fire Fighting Sprinklers, Fire Hydrant Internal and External Works Testing and Handover. Low voltage systems (FAPA, CCTV and VDP) Testing and Handover. 15 and 20 passenger elevator with machine room Installation. STP, UGR, OHT and Pump House Testing, Commissioning and Handover. Ventilation system - Testing, Commissioning and Handover. Stack Parking - Testing, Commissioning and Handover. CP Sanitary Fixings, Testing, Commissioning and Handover. Rainwater Harvesting System - Testing, Commissioning and Handover. Team Management Managing store HK, Security and Electrician team and Conducting Teams online meeting twice in a week with Cluster facility members. • Zonal Report Tracker Maintaining MIS tracker of AMC bills process and payments status of 101 stores of all AMC machineries. • Meeting Budgets Adhering to the given target and aligning dynamics to meet the same. Power and Fuel Consumption, R&M Cost and Manpower (HK & Security) Saved 7.13Lacs against YTD BUD 23-24. • Preventive Maintenance – Efficient maintenance of all machineries like UPS, Inverter, Lights HVAC, fire detection system across the year to save expense on R&M. • Hygiene and Workplace Safety– Ensuring cleanliness of total store for customer good experience. Checking and maintaining of Safety standards of store, fun zone, Offices and Warehouses to avoid any incidents. • Green Audit Scores – Maintaining audit parameters and achieving scores above ZO Average. Renewal and maintaining all compliance licenses like Fire NOC, CLRA, Trade license, S&E license Etc. Commercial Audit (LY): - Admin: 100%, Statutory Compliance: 94% • Vendor Creation & Payment Tracker – Processing Bills in SAP like AMC bills, R&M work bill, Rent & Cam charges and vendor bills, also tracking the payments status for future requirements. • Safety Training – Conducting safety training to all store staff. Emergency response team work discussion, Fire mock & Evacuation Drill, First Aid training, Road Safety Topics ETC. INTERESTED CANDIDATE CALL SUMIT KUMAR SARKAR AT 9339743066

Requirements We need 12 years of overall experience after completing B.Tech and 5 years of mandatory experience should be in underground metro or either in transportation tunnel projects. HIRING FOR GMLR PROJECT [GOREGAON MULUND LINK ROAD] This is a twin tunnel road project and the location is in Goregaon, Mumbai

Performs complex BIM or Plant Data Centric assignments involving the use of multiple application platforms, such as Revit, Intergraph SmartPlant, Plant 3D, etc. software, to achieve set results and deadlines. Duties and Responsibilities Works under general supervision to complete HVAC BIM design projects. Provides training and technical support to design staff on the Building Information Modeling system, which provides 3D models using project specifications and content. Directs project support and production for assigned projects, creating drawings as required using standards and content to meet job requirements (objects within the drawing, doors, lights, etc.). Develops and maintains HVAC system models, including ductwork, piping, and equipment layouts. Coordinates with other disciplines (structural, electrical, plumbing) to ensure proper integration of HVAC systems within the overall building model. Performs clash detection and resolution using software such as Navisworks to identify and resolve conflicts between building systems. Generates accurate quantity take-offs and schedules from BIM models to support cost estimation and procurement processes. Participates in project meetings to discuss design progress, challenges, and solutions with the project team and stakeholders. Ensures compliance with building codes, energy efficiency standards, and project specifications in HVAC system designs. Maintains and updates BIM content libraries specific to HVAC components and systems. Collaborates with engineers and architects to optimize HVAC system performance and energy efficiency through iterative design processes. Prepares and presents design options and recommendations to project managers and clients. Stays current with industry trends, new technologies, and best practices in HVAC BIM design and implementation. Qualifications Minimum : Bachelor's degree in Mechanical Engineering, Architectural Engineering, or related field + 2 years of relevant experience, or demonstrated equivalency of experience and/or education Proficiency in Revit, AutoCAD, and Navisworks Strong understanding of HVAC systems and building codes Experience with 3D modeling and BIM workflows Excellent problem-solving and analytical skills Preferred Qualifications: 3+ years of experience in HVAC design using BIM software Advanced knowledge of Revit MEP and its HVAC-specific features Familiarity with energy modeling and analysis tools Experience with Revizto, Microstation, or other BIM collaboration platforms LEED Accredited Professional certification Knowledge of sustainable design principles and energy-efficient HVAC systems Strong communication skills and ability to work effectively in a team environment Experience with clash detection and resolution in multi-discipline projects Familiarity with industry standards such as ASHRAE and SMACNA Ability to mentor junior designers and contribute to BIM standards development

Responsible for engineering, design, and modification activities related to mechanical equipment, vessels and tanks and piping systems including equipment and piping specifications and procurement. May be involved with the support of installation and operation & maintenance of equipment. Discipline concerning air conditioning, refrigeration, ventilation, combustion, heat transfer, energy, power, fuels, propulsion, machinery, tools, manufacturing, fluids, plumbing, fire suppression systems and devices, water supplies and pumping systems for fire protection. Discipline covers the ability to solve problems that deliver and optimise safe, sustainable and ethical solutions for the design, production and operation of devices, machines, structures, processes and systems involving mechanical elements. Duties and Responsibilities Senior technical resource may serve as technical advisor for team Provides specialized technical input to studies and design for staff's specific area of expertise. Develops study and design procedures to facilitate high quality cost effective work by others. Participates in interdisciplinary review of project deliverables. Develops construction cost estimates and estimates of technical efforts for projects. Uses expertise in all steps of completing discipline component of PS&E package. Performs quality control review of design calculations or drawings. Prepares technical specification sections. Provides input to the development of engineering budget and schedule to meet requirements. Knowledge Independently analyzes and applies solutions to challenging issues within the area of expertise by applying critical thinking Analyzes and applies solutions to atypical and/or challenging issues within the area of expertise using standard operating procedures/methodologies Engineering experience that provides knowledge and exposure to fundamental theories, principles and concepts Demonstrated experience using AutoCAD, Revit and Navisworks skills. Good written and verbal communication skills. Prepares project deliverables that are reviewed by senior team members Continues to grow knowledge of the organization, customers, and processes Technical Excellence Identifies incremental improvements to existing procedures or processes that increase efficiency or work quality Performs a self-check of work products prior to submitting them to others. Leadership Works independently and collaboratively with a lesser level of guidance needed for unfamiliar tasks Provides regular updates to the manager on project/assignment status May assist more junior staff members with aspects of their job and may coordinate activities of a small team. Qualifications Minimum Bachelor's Degree in Mechanical Engineering (with minimum 10years experience) or Equivalent and specialising in HVAC Design. He/She should be well versed with ASHRAE/CIBSE/NFPA. He/She should have experience in commercial, residential, datacentre, and infrastructure projects from different geographies - USA, Canada, ANZ Region. Experienced Senior Mechanical Engineer - Specialized in HVAC Design. Should be capable of leading the discussions with the Client and lead projects for the HVAC Disciplines. Should be able to take Design decisions independently.

Performs specific and limited portions of a broader assignment of an experienced engineer. Gathers and correlates basic engineering data using established and well-defined procedures. Works on detailed or routine engineering assignments involving calculations and relatively simple tests. Proposes approach to solve new problems encountered. Identifies discrepancies in results. Provides guidance to entry level engineers. Performs work in accordance with agreed upon budget and schedule with moderate supervision. Designs and develops plumbing systems for various building types, ensuring compliance with local codes and regulations. Calculates heating and cooling loads for HVAC system design. Collaborates with architects and other engineering disciplines to integrate PHE systems into overall building design. Prepares technical specifications and drawings for PHE systems using CAD software. Conducts site visits to assess existing conditions and gather necessary information for project planning. Participates in project meetings to discuss progress, challenges, and solutions related to PHE systems. Assists in the preparation of cost estimates and project schedules for PHE components. Stays current with industry trends, new technologies, and best practices in plumbing, heating, and engineering. Qualifications Qualifications: Bachelor's degree in Mechanical Engineering or related field; Master's degree preferred Minimum of 3-5 years of experience in plumbing, heating, and engineering (PHE) design for multi-use buildings Professional Engineer (PE) license or ability to obtain within 6 months of hiring Proficient in PHE & Fire services Design for Buildings (multi uses) Advanced knowledge of local and international building codes and regulations related to PHE systems Expert-level proficiency in Revit, AutoCAD, and Navisworks software Strong understanding of HVAC systems, including load calculations and energy efficiency principles Experience with Building Information Modeling (BIM) and 3D modeling techniques Familiarity with sustainable design practices and LEED certification processes Excellent problem-solving and analytical skills Strong communication and interpersonal abilities for collaborating with cross-functional teams Proven project management skills, including budgeting and scheduling Ability to perform site visits and assessments as needed Commitment to staying current with industry trends and emerging technologies in PHE systems

Responsible for engineering, design, and modification activities related to mechanical equipment, vessels and tanks and piping systems including equipment and piping specifications and procurement. May be involved with the support of installation and operation & maintenance of equipment. Discipline concerning air conditioning, refrigeration, ventilation, combustion, heat transfer, energy, power, fuels, propulsion, machinery, tools, manufacturing, fluids, plumbing, fire suppression systems and devices, water supplies and pumping systems for fire protection. Discipline covers the ability to solve problems that deliver and optimise safe, sustainable and ethical solutions for the design, production and operation of devices, machines, structures, processes and systems involving mechanical elements. Duties and Responsibilities Senior technical resource may serve as technical advisor for team Provides specialized technical input to studies and design for staff's specific area of expertise. Develops study and design procedures to facilitate high quality cost effective work by others. Participates in interdisciplinary review of project deliverables. Develops construction cost estimates and estimates of technical efforts for projects. Uses expertise in all steps of completing discipline component of PS&E package. Performs quality control review of design calculations or drawings. Prepares technical specification sections. Provides input to the development of engineering budget and schedule to meet requirements. Technical Excellence Identifies incremental improvements to existing procedures or processes that increase efficiency or work quality Performs a self-check of work products prior to submitting them to others. Leadership Works independently and collaboratively with a lesser level of guidance needed for unfamiliar tasks Provides regular updates to the manager on project/assignment status May assist more junior staff members with aspects of their job and may coordinate activities of a small team. Qualifications Minimum Minimum Bachelor's Degree in Mechanical Engineering (with minimum 10years experience) or Equivalent and specialising in HVAC Design. He/She should be well versed with ASHRAE/CIBSE/NFPA. He/She should have experience in commercial, residential, datacentre, and infrastructure projects from different geographies - USA, Canada, ANZ Region. Experienced Senior Mechanical Engineer - Specialized in HVAC Design. Should be capable of leading the discussions with the Client and lead projects for the HVAC Disciplines. Should be able to take Design decisions independently. Energy Modelling , Building Performance analysis & IES Software skills listed in detail below. Utilize the energy modelling software like IES VE to simulate the building performance and energy consumption Analyze the data received from client and data from energy results and provide the best energy efficient solutions to tam Collaborate with the multidisciplinary teams for various inputs and outputs to do the efficient design process Ability to work on Cooling/Heating loads, Energy consumption and building performance in IES VE or any other modelling software Familiarity with ASHRAE 90.1, 62.1, 55 and CIBSE requirement Knowledge of Mechanical system architecture and components

Duties & Responsibilities Serves as lead engineer on mid- to large size projects. Provides specialized technical input to studies and design for staff's specific area of expertise. Approves and signs off on work. Provides technical expertise for studies and design efforts. Presents complex technical solutions to clients. Performs quality control reviews of work developed by others. Participates in development of technical proposals. Provides estimates for the engineering budget and schedule to meet requirements on large projects. Oversees and coordinates HVAC system design for complex projects. Develops and implements energy-efficient HVAC solutions. Mentors and guides junior engineers in HVAC design principles. Ensures compliance with local and national building codes and regulations. Collaborates with cross-functional teams to integrate HVAC systems with other building components. Conducts site visits to assess existing HVAC systems and recommend improvements. Stays current with industry trends and emerging technologies in HVAC design. Qualifications Minimum Bachelor's degree in Mechanical Engineering or related field + 15years of relevant experience, or demonstrated equivalency of experience and/or education Professional Engineering (PE) license in HVAC Extensive knowledge of HVAC systems, design principles, and energy-efficient solutions Proficiency in HVAC design software (e.g., AutoCAD, Revit MEP, Trane TRACE) Strong understanding of building codes and ASHRAE standards Excellent project management and leadership skills Superior communication and presentation abilities Demonstrated experience in managing mid to large-size HVAC projects Preferred Qualifications Master's degree in Mechanical Engineering or related field LEED AP certification Experience with Building Information Modeling (BIM) Knowledge of sustainable design practices and renewable energy systems Familiarity with commissioning processes Experience in mentoring junior engineers Active participation in professional organizations (e.g., ASHRAE, USGBC)

Duties and Responsibilities Performs specific and moderate portions of a broader assignment of an experienced engineer. Gathers and correlates basic engineering data using established and well-defined procedures. Works on detailed or routine engineering assignments involving calculations and relatively simple tests. Proposes approach to solve new problems encountered using modifications of standard procedures or methods developed in previous assignments. Identifies discrepancies in results. Provides guidance to entry level engineers. Performs work in accordance with agreed upon budget and schedule with little supervision. Independently performs all the tasks necessary to complete primary design elements for engineering works. Performance at this level requires developmental experience in a professional position. Designs and optimizes plumbing, heating, and ventilation systems for various types of buildings and structures. Conducts energy efficiency analyses and proposes improvements to existing PHE systems. Collaborates with architects, structural engineers, and other professionals to ensure integrated design solutions. Develops and maintains project schedules, ensuring timely completion of PHE design deliverables. Mentors junior engineers and provides technical guidance on complex PHE design issues. Participates in client meetings to present design concepts and address technical queries. Ensures compliance with relevant building codes, standards, and regulations in PHE system designs. Performs quality control checks on PHE designs and documentation before final submission. Contributes to the development of in-house design standards and best practices for PHE systems. Qualifications Minimum Bachelor's degree in Mechanical Engineering, Civil Engineering, or related field 7+ years of experience in PHE design for commercial and industrial projects LEED AP certification Experience with Building Information Modeling (BIM) and Revit Knowledge of fire protection systems, including hydrant systems, sprinkler systems, fire zoning, fire extinguishers, and clean agent systems Familiarity with energy modeling and analysis software Experience with Navisworks for clash detection and coordination Strong project management skills and experience leading design teams Excellent communication skills, both written and verbal Experience in client-facing roles and ability to present technical information to non-technical audiences

Duties and Responsibilities Performs specific and moderate portions of a broader assignment of an experienced engineer. Gathers and correlates basic engineering data using established and well-defined procedures. Works on detailed or routine engineering assignments involving calculations and relatively simple tests. Proposes approach to solve new problems encountered using modifications of standard procedures or methods developed in previous assignments. Identifies discrepancies in results. Provides guidance to entry level engineers. Performs work in accordance with agreed upon budget and schedule with little supervision. Independently performs all the tasks necessary to complete primary design elements for engineering works. Performance at this level requires developmental experience in a professional position. Develops and maintains HVAC system designs, including load calculations, equipment selection, and ductwork layouts. Collaborates with cross-functional teams to ensure HVAC designs integrate seamlessly with other building systems. Conducts energy modelling and analysis to optimise HVAC system efficiency and sustainability. Prepares detailed technical reports and presentations for clients and stakeholders. Ensures compliance with relevant building codes, standards, and regulations in HVAC design. Participates in site visits to assess existing HVAC systems and propose improvements or retrofits. Qualifications Minimum Master's degree in Mechanical Engineering or related field 7+ years of experience in HVAC system design for commercial and industrial buildings Proficiency in HVAC design software such as HAP and IES Strong knowledge of ASHRAE standards and local building codes Excellent problem-solving and analytical skills International project exposure (US, UK, MEA, and Singapore) and familiarity with respective building codes Proficiency in Revit, AutoCAD, and Navisworks Experience with energy modeling and sustainability analysis Strong communication and presentation skills Ability to mentor junior engineers and lead project teams Familiarity with project management principles and practices

AECOM India is seeking to hire a Mechanical Design Engineer for our Hyderabad Office. The vacancy is for the position in the area of BIM Specialist with specialization in HVAC & Refrigeration. Responsibilities, required experience and qualification are summarized below: Responsibilities: Expertise in selection of required HVAC systems various applications. Provide inputs for mechanical design calculations like heat load calculations, ventilation calculations, pressure drop calculations for ducting and piping, duct sizing, pipe sizing, etc. Preparation of single line design mark-up and drawings like P & IDs, general layout, duct layout, piping layout. Shall carry out work in according to relevant codes and standards. Keep well-informed of latest trends and technologies and implementation of the same Participation in the progress and coordination meetings of the project. Responsible for compliance with our QA / QC procedures and implementation of procedures. Experience: Experience in MEP design of Infrastructure and Data Centers project with specialization in HVAC and Refrigeration. Knowledge of relevant design standards as per ASHRAE, NBC, ECBC, NFPA, etc. Good working knowledge of related software like Navis Works, BIM and AutoCAD Candidate with design consultancy background will be preferred. Qualification Diploma/B.E./ B. Tech in Mechanical Engineering from a reputed Institute with 3-5 years of experience in HVAC Design.

Role Overview We are looking for a Planning Manager MEP to lead our in-house engineering and design team across all MEP verticals: Mechanical (HVAC), Electrical, Plumbing, and Firefighting. This is a critical role bridging the gap between BOQs and buildable IFC drawingsensuring that what's designed is ready for real-world execution. You'll be responsible for the full design-to-drawing lifecycle , managing quality, consistency, and alignment with site needs. Acting as the hub between consultants, internal teams, and planning functions, you'll drive error-free, timely releases and reduce on-site rework. Key Responsibilities 1. Engineering & Design Leadership Own the design process for all MEP trades across multiple concurrent industrial projects. Convert approved BOQs into coordinated IFC (Issued for Construction) drawings. Ensure drawing releases are technically sound, timely, and tailored to real site conditions. Drive standardization of drawing templates, layer systems, and internal review processes. Establish strong QA/QC review pipelines for drawing approvals. 2. Project Planning & Coordination Work closely with the Projects team to map drawing release schedules to execution timelines. Hold weekly drawing coordination and clash-resolution meetings with stakeholders. Proactively revise or reissue drawings in response to site feedback or shifting constraints. Use Promasch to track drawing versions, revisions, and quantity validations. 3. Stakeholder & Consultant Interaction Liaise with client consultants to obtain technical sign-offs and close RFIs efficiently. Support the estimation and costing team with section details, validated quantities, and constructability inputs. Provide final design validation before any major procurement or construction milestone. 4. Team Management & Development Lead a cross-disciplinary team of Draftsmen and Design Engineers across all MEP trades. Build and enforce a culture of precision, ownership, and peer-reviewed quality. Identify skills gaps and lead upskilling efforts across AutoCAD, Revit/BIM, and design codes. Foster collaboration and continuous learning through regular internal tech reviews. Ideal Candidate Profile Education B.E./B.Tech in Mechanical or Electrical Engineering AutoCAD certification is essential; Revit/BIM familiarity is a strong plus Experience 1518 years of experience in MEP design and planning Proven track record in leading MEP design for industrial projects (e.g., cleanrooms, data centers, electronics manufacturing, or high-spec utilities) Hands-on experience managing large drawing pipelines with multiple disciplines Technical Skills Proficiency in AutoCAD (2D essential; 3D/Revit a plus) Familiarity with design standards: ASHRAE , NBC , IS codes , NFPA , etc. Understanding of HVAC load calculations, electrical load distribution, plumbing and drainage design, fire detection/suppression systems Strong grasp of version control, layer management, and drawing management systems Soft Skills Strong communicator with the ability to coordinate across Project, Procurement, QA/QC, and Client teams Problem solver who thrives in dynamic, fast-track environments Leadership mindset with a hands-on approach to delivery Ability to manage multiple priorities without compromising on detail

Job Title: Mechanical, Electrical & Plumbing Engineer. About Company: - Raviraj Realty is the name of trust and affection that has been continuously operating in the Real Estate Industry for the past 30 years. Raviraj Realty is Pune's renowned residential, commercial, and infrastructure developer. The company has gained a great reputation in a very short time due to its approach of thinking from the customers point of view and working to make their dreams come true. Responsibilities: - - Provide conceptual and detailed design for HVAC-Firefighting & Fire Alarm system. - Provide material and equipment specifications for HVAC, & Fire Alarm, and Firefighting systems. - Generate SOW for HVAC/Firefighting & Fire Alarm for subcontractors. - Design review and validation of the HVAC & Fire system design package provided by the consultant. - Professional in HVAC & Fire system design, drawing, calculation, quantity survey & BOQ. - Familiar with applicable local and international standards. LEED standard acquaintance. - Added design knowledge of all pumping systems, STP, WTP, Swimming pools, and the reticulated gas system will be advantageous. Required Candidate Profile: - Solid organizational skills, including multitasking and time management. Excellent analytical skills and attention to detail. Strong Knowledge of HVAC-Firefighting & Fire Alarm systems. Experience- 8-10 years Education- B.E./ B Tech in Civil Engineering. Company Type- Real Estate Location- Sangamwadi, Pune.

Check electrical system, firing, plumbing & HVAC. Supervise MEP works for quality, safety & compliance. Review drawings & BOQs; plan activities as per schedule. . Maintain reports & documentation. Perks and benefits Fuel, Accommodation, and Food

Key Information: Designation: Project Engineer Department: Projects Location: Hyderabad (requires extensive travel) Experience: 4+ years Prerequisites: Bachelors degree in Engineering (Mechanical, Civil, Electrical, or equivalent). Minimum of 4 years of relevant experience in project execution, vendor management, and MEP oversight. Possesses a strong understanding of Mechanical, Electrical & Plumbing (MEP) systems for technical site evaluations and issue resolution Strong communication and stakeholder management skills. Proven ability to manage multiple sites with frequent travel. Proficiency in MS Office, project scheduling tools, and report generation. Ability to read and interpret technical drawings and project layouts. Roles and Responsibilities: Conduct initial site surveys and generate comprehensive site recce reports. Assess site feasibility and compliance with regulatory and project requirements. Coordinate with internal teams for timely design and technical layout approvals. Liaise with landlords and building management for site access and procedural approvals. Develop and manage internal project schedules to monitor progress. Manage vendor coordination for on-site execution across multiple locations. Monitor vendor adherence to execution checklists, quality standards, and MIR protocols. Prepare and circulate snag reports, identify pending or defective works, and follow up for closures. Handle procurement and ensure the timely delivery of materials related to Alt F’s scope. Oversee site-level material receipt, validation, and quality checks. Ensure complete and compliant project handovers from vendors. Coordinate smooth transition to operations or facility management teams. Cross-verify layout implementations and asset installations for design compliance. Manage vendor follow-ups during the Defects Liability Period (DLP). Assess feasibility and manage the execution of client-specific customization requests. Share your resumes at yachika.kanojia@altfspaces.com

GM - Projects (Store design & planning) @ Mumbai_Urgent Brief Overview of the Role: ROLE PURPOSE To lead and drive strategic space planning, design optimization, and retail execution initiatives that align with business objectives and enhance market presence. The role involves collaborating across teams to implement global store concepts, innovating through technology, managing budgets, and delivering strategic insights to create functional, adaptive, and efficient retail environments. ROLES & RESPONSIBILITIES Lead the Space Planning Team: Oversee and guide the team in designing and optimizing retail spaces to align with business goals. Drive Execution and Development Strategy: Manage the strategic planning and seamless execution of space planning initiatives. Collaborate on Global Concept Rollouts: Work closely with international teams to implement and localize global store concepts. Represent the Planning Team: Act as the spokesperson for the store planning and presentation team across all organizational levels. Strengthen Business Footprint: Partner with the business development team to identify opportunities and expand market presence. Provide Strategic Design Insights: Analyse trade zones and site adaptability to deliver innovative and functional store designs. Manage Budgets and Resources: Oversee demand creation budgets and resource allocation to ensure efficient retail model rollouts. Innovate Through Technology: Research, evaluate, and implement technology solutions to enhance store planning and solution delivery. Bridge Business and Technology: Collaborate with business leaders and subject-matter experts to translate requirements into strategic technological solutions. Lead Concept Implementation: Work with stakeholders to bring concepts to life, ensuring alignment with organizational goals and vision. ROLE SPECIFICATIONS QUALIFICATION Diploma in Architecture/ Planning & Design/ Civil Engineering or PMP certification EXPERIENCE 13+ years in a managerial capacity of leading independent Retail Design Development projects in Shopping Malls, Individual store design, Office cum Warehouses, Residential apartments and providing Design Management services COMPETENCIES Knowledge of spaces, spatial layouts, spatial planning Knowledge of Architectural detailing, Construction Methodology and Civil / MEP / Interior work estimation Contract Administration Construction Management Design, Cost and Project Management understanding Excellent Verbal and Non-Verbal Communication Planning and Organizing Resourcefulness Problem Solving Decision-Making

Role & responsibilities Providing All data To Maintenance Head Handling Day to day Activity of all Technician. Coordinating with Vendor for Renovation & other civil and Electrical work in Stores and Central Kitchen Handling Store Equipment. Handling Electrical & civil Work Coordinating with Vendor for Cost Cutting and Proper Relationship with Vendor. Handling Breakdown Electrical Equipment ( like as oven, make line etc) Knowledge of Water System, HVAC System, Steam Application Preventive Maintenance of machines as per schedule. To attend the machines which are under break down, and minimize the breakdown period if possible. Guide and instruct the worker from time to time. Preferred candidate profile Should have worked in Central Kitchens or QSR or Food production unit. Interested candidates can apply on konikaoasis@gmail.com Contact Details Konika Singh 8104986816

Efficient project management which include project scheduling, lead and co-ordinate the whole project team which includes project team, subcontractors and suppliers Handling projects from Bid & Start Up phase to Handover of project. Coordinate the whole project team which includes project team, subcontractors and suppliers.

Job Title: Assistant General Manager (AGM) - MEP Sales Location : Bangalore Reports To : AVP -Projects Job Overview: The AGM MEP Sales will be responsible for leading and managing the sales strategy, development, and execution for the MEP division. This role requires strategic thinking, leadership, and deep knowledge of MEP products and services to drive sales growth and establish strong relationships with clients across various industries. The ideal candidate will have a proven track record in B2B sales, project management, and the MEP sector. Key Responsibilities: 1. Sales Strategy and Planning: 2 . Client Relationship Management: 3.Team Leadership and Development : 4. Market Research and Competitive Analysis 5. Project Coordination . 6. Reporting and Performance Metrics 7 . Budget Management Skills and Qualifications: • Educational Qualification: Bachelors Degree in Mechanical or Electrical Engineering (preferably with a focus on MEP). MBA or any relevant post-graduate qualification is a plus. • Experience: Minimum of 7+ years of experience in MEP sales, project management, or business development, with at least 35 years in a managerial or leadership role. Proven track record of successfully managing sales teams and driving revenue growth in the MEP industry. Strong understanding of MEP systems, construction, and infrastructure projects. Experience working with large-scale projects and handling multiple stakeholders. • Skills: Strong leadership, negotiation, and communication skills. Excellent knowledge of MEP products, solutions, and services. Proficiency in CRM software, Microsoft Office Suite, and other sales tools. Ability to manage and prioritize multiple projects simultaneously. Strong analytical skills and attention to detail. • Personal Traits: Proactive, goal-oriented, and customer-centric. Strong problem-solving abilities. Ability to work under pressure and handle complex sales situations. Additional Requirements: •Ability to travel as required for client meetings, site visits, and industry events. •Strong networking skills within the construction, MEP, and related sectors. Compensation: •Competitive salary and performance-based incentives.

Experience in Projects / Operations / Contacts / Design of Mechanical, Electrical, Plumbing, Fire, LV & other Systems. Must have in-depth knowledge of design, construction & commissioning of Electrical / HVAC / Fire / Plumbing designing in DC project Required Candidate profile Understanding of Electrical System, HVAC, Fire, Plumbing. Coordinate with the project team daily to check for system clashes or site constraints in terms of MEP Systems. Function as a design engineer. Perks and benefits All facilities like PF, Insurance, Gratuity, Bonus

Tata Consulting Engineers Limited is looking for Manager- HVAC Design- Thermal to join our dynamic team and embark on a rewarding career journey Delegating responsibilities and supervising business operations Hiring, training, motivating and coaching employees as they provide attentive, efficient service to customers, assessing employee performance and providing helpful feedback and training opportunities. Resolving conflicts or complaints from customers and employees. Monitoring store activity and ensuring it is properly provisioned and staffed. Analyzing information and processes and developing more effective or efficient processes and strategies. Establishing and achieving business and profit objectives. Maintaining a clean, tidy business, ensuring that signage and displays are attractive. Generating reports and presenting information to upper-level managers or other parties. Ensuring staff members follow company policies and procedures. Other duties to ensure the overall health and success of the business. Competencies Drives Results Demonstrates Self-Awareness Ensures Accountability Resourcefulness Ability to Learn Job Knowledge

Role & responsibilities We are seeking an experienced MEPF Engineer who is proficient in Revit, Navisworks, ACC (Autodesk Construction Cloud), and Dynamo. The ideal candidate will be responsible for managing and executing MEPF projects, content creation, family creation, and conducting comprehensive training programs for corporate teams and individual professionals. The role involves both technical engineering tasks as well as the development of training materials and learning paths. Key Responsibilities: Project Involvement: Manage MEPF project coordination with Revit and Navisworks, ensuring integration across disciplines. Work closely with the project team to maintain high standards in MEP design, troubleshooting, and collaboration. Assist in the preparation of design documents, drawings, and models for mechanical, electrical, and plumbing systems. Content and Family Creation: Create, develop, and maintain MEP content and families in Revit for various mechanical, electrical, and plumbing systems. Customize MEP families based on project specifications, requirements, and industry standards. Optimize family creation for better performance and flexibility within the Revit environment. Dynamo Scripting: Utilize Dynamo for automating repetitive tasks, improving project efficiency, and solving complex engineering challenges. Create custom scripts for design optimization and to support the team in Revit-based processes. Training & Development: Develop a structured learning path for both corporate teams and individual professionals, based on their experience levels. Conduct hands-on training sessions on Revit, Navisworks, ACC, and Dynamo for MEP engineers, architects, and designers. Stay up-to-date with the latest software features, industry trends, and best practices in BIM, integrating these into training materials. Provide ongoing support and mentorship to trainees to ensure effective implementation of learned skills. Collaboration with Corporate Clients: Engage with corporate clients to understand their training needs and provide customized training solutions. Build and maintain strong relationships with key stakeholders, ensuring successful implementation of training and development programs. Process Improvement: Identify and implement process improvements within the MEPF discipline using Revit, Navisworks, and ACC. Preferred candidate profile 3+ years of experience as BIM Specialist. MEP, Revit, HVAC & plumbing mandatory. Good communication skills. Benefits Competitive Salary Provident Fund Insurances Reimbursements

Job Title: MEP Manager (5-Star Hotel Development) Location : Project Site (Full-time) Reports To : Project Director / Project Manager / Promoter Objective: To lead and manage the planning, coordination, and execution of all Mechanical, Electrical, Plumbing, Fire Safety, HVAC, IBMS, and ELV works for a 5-star hotel project, ensuring seamless integration of services with civil and interior works. This role is strictly for an on-ground executor , not a passive coordinator the candidate must be present at site daily to manage real-time challenges. Key Responsibilities: 1. Planning & Design Coordination Collaborate with design consultants (MEP, HVAC, Fire, IBMS) to finalize coordinated GFC drawings Validate designs against hotel operator specifications Ensure space provisions, shaft planning, and clearances are well-integrated with civil and ID Attend technical review meetings and coordinate clash detection and resolution with design teams Review MEP drawings, technical specifications, and design documents for accuracy and completeness. Plan and monitor the execution of MEP systems in accordance with project timelines and hotel brand standards. Coordinate between consultants, contractors, architects, and other site teams to ensure integrated service delivery. Schedule MEP activities and track daily progress across various disciplines. 2. Procurement & Vendor Coordination Review technical specifications and BOQs for all MEP packages Assist procurement team in evaluating technical bids and shortlisting vendors Plan MEP material delivery schedules in sync with construction timelines Approve shop drawings, sample submissions, and mockups as per project specifications 3. Site Execution & Supervision Lead all MEP works on site including HVAC, electrical, plumbing, fire safety, STP/ETP, DGs, lifts, IBMS, CCTV, access control, and lighting automation Monitor day-to-day progress of MEP contractors and ensure alignment with civil and finishing activities Ensure adherence to brand specifications, local codes (NBC, IGBC), and international hospitality standards Resolve execution-level conflicts, verify correct routing and installation, and ensure concealments are coordinated with ID Supervise all cutouts, sleeves, and embedded work during civil construction to avoid rework 4. Quality Control & Compliance Conduct regular site inspections to ensure compliance with approved designs, local codes, and statutory requirements. Ensure adherence to international standards (e.g., NBC, ASHRAE, IS codes) and hotel-specific MEP specifications. Approve MEP material submittals and mock-ups before execution. 5. Testing, Commissioning & Handover Prepare testing and commissioning schedules for each system (dry and wet testing) Ensure mock-up rooms are completed with functioning MEP systems for brand approvals Lead system-wise testing (HVAC, fire detection/suppression, lighting, plumbing, elevators) Coordinate third-party inspections, calibration, and certifications as per statutory and brand requirements Prepare all O&M manuals, test reports, and handover documentation 6. Project Management & Reporting Maintain daily site logs and weekly MEP progress reports with photos and milestones Track material usage, wastage, and installation quality Monitor contractor productivity and safety compliance Identify risks/delays in MEP works and propose mitigation actions Liaise with civil and ID teams for integrated execution across all hotel zones (guest rooms, public areas, BOH, plant rooms) 7. System Integration Ensure seamless integration of ELV, BMS, access control, CCTV, AV, guestroom management systems (GRMS), and lighting automation Align hotel operators pre-opening IT team with on-site cabling, equipment placement, and server room readiness Oversee interface of MEP systems with operators asset management and maintenance software Desired Profile: Degree/Diploma in Mechanical / Electrical Engineering (MEP-focused certifications preferred) 10+ years of experience in large-scale luxury hospitality or commercial projects Deep knowledge of hotel-grade MEP requirements and coordination with civil/ID Strong understanding of fire safety, HVAC zoning, STP/ETP operations, and IBMS Must be active at site , able to lead and troubleshoot hands-on this is not a monitoring-only desk role Good communication and team coordination skills

As a global leader in smart, healthy, and sustainable buildings, our mission is to reimagine the performance of buildings to serve people, places and the planet. Join a winning team that enables you to build your best future! Our teams are uniquely positioned to support a multitude of industries across the globe. You will have the opportunity to develop yourself through meaningful work projects and learning opportunities. We strive to provide our employees with an experience, focused on supporting their physical, financial, and emotional wellbeing. Become a member of the Johnson Controls family and thrive in an empowering company culture where your voice and ideas will be heard - your next great opportunity is just a few clicks away! What we offer Competitive salary Paid vacation/holidays/sick time On the job/cross training opportunities Encouraging and collaborative team environment Dedication to safety through our Zero Harm policy What you will do The primary responsibility for this role is to lead Building Management System global projects detailed engineering as per country specific standards from India Engineering center. Independent execution of project throughout the lifecycle , handle first level escalation. Follow processes, maintain required quality standards and on time deliveries to ensure customer satisfaction. How you will do it Review MEP drawings and identify HVAC equipment, dampers and sensors. Review control specifications and sequence of operations Generation of initial review sheets and RFI s. Creation of Bill of material, selection of sensors, control valves, dampers, air flow stations, controllers etc. Control devices and controller wiring, terminations, interlock wiring Preparation of I/O Summary. Preparation of BMS network architecture. Software programming of supervisory and DDC level controllers, prepare test plan, perform simulation and delivering commissioning package to field from India Engineering center. Ensure quality assurance and defect free hardware and software package delivery. Adherence with all processes and guidelines to execute project within timeline. What we look for BE/ME (Instrumentation / Electrical/ Electronics / Electronics Communication. Knowledge of HVAC systems like Chilled Water System, Cooling Towers, Primary Secondary pumping systems, Hot Water System, Different types of AHUs, FCUs, VAV systems etc. Strong knowledge of BMS architecture with different types of Operator workstations, Supervisory Controllers, DDC controllers, Sensors Actuators etc. Knowledge of different types of network protocols like BACNet, LON, Modbus, OPC, and other protocols. Must be proficient in wiring of starters, field devices, safety interlocks panels. Experience in engineering, installing and commissioning of HVAC BMS systems for infrastructure projects like pharmaceuticals, airports, commercial buildings, hospitals. Experience in the field of Industrial Automation (PLC programming/SCADA) will be added an advantage Must be a quick learner should have a keen eye for problem solving. Proficient in written and verbal communication. Ability to demonstrate good leadership skills. Preferred 5+ years of relevant experience in Building Automation Industry, BMS Design Engineering or Industrial Automation.