2169 Matlab Jobs - Page 33

ELECTRICAL AND INSTRUMENTATION ENGINEER We are seeking a highly skilled and experienced Electrical and Instrumentation (E&I) Engineer to contribute to the design, engineering, and documentation of electrical and instrumentation systems in oil and gas projects. The ideal candidate will have an M-Tech in Engineering and at least 5 years of hands-on experience working on complex electrical and instrumentation systems, particularly within the oil and gas sector. The E&I Engineer will be responsible for designing electrical and instrumentation systems, preparing technical documentation, and ensuring the effective execution of projects while adhering to safety, quality, and regulatory standards. Key Responsibilities: Design Engineering : Lead the design, specification, and selection of electrical and instrumentation systems for oil and gas projects, including power distribution systems, control systems, instrumentation, and automation solutions. Project Execution : Work closely with project managers and multidisciplinary teams to ensure the timely and cost-effective execution of E&I designs, meeting project milestones and client specifications. System Design & Integration : Develop and integrate electrical and instrumentation systems, including power supplies, protection systems, field instrumentation, control systems, and SCADA systems, ensuring compatibility and functionality with other project systems. Documentation : Prepare and review technical documentation, including design calculations, equipment specifications, control panel designs, wiring diagrams, loop diagrams, and instrumentation datasheets. Ensure all documentation is in compliance with project standards and regulatory requirements. Compliance & Standards : Ensure designs comply with relevant industry standards, codes, and regulations (e.g., IEC, NEC, API, etc.) as well as internal company procedures and quality requirements. Cost Estimation & Scheduling : Assist in the preparation of project cost estimates, schedules, and resource plans for E&I work packages, ensuring cost-effective solutions without compromising quality and safety. Vendor & Equipment Selection : Identify, evaluate, and select appropriate vendors and equipment for electrical and instrumentation systems based on technical specifications, cost, and schedule. System Commissioning : Provide technical support during the installation and commissioning phases of electrical and instrumentation systems, ensuring systems are tested, validated, and operate according to design specifications. Troubleshooting & Support : Provide ongoing support for the operation and troubleshooting of electrical and instrumentation systems during the construction and operational phases of projects. Risk Management : Identify potential risks related to electrical and instrumentation design and implementation and provide solutions to mitigate them, ensuring safe and reliable system operations. Mentorship & Training : Mentor junior engineers and technical staff, fostering a collaborative learning environment and ensuring adherence to best engineering practices and company standards. Requirements: Educational Qualifications : M-Tech in Electrical Engineering, Instrumentation Engineering, or a related field. Experience : Minimum of 5 years of experience in electrical and instrumentation design engineering, preferably in the oil and gas industry. Technical Skills : Proficiency in electrical and instrumentation system design, including power distribution, control systems, and instrumentation for industrial applications. Experience with industry-standard software tools (e.g., AutoCAD, EPLAN, MATLAB, or similar tools for design and documentation). Strong knowledge of electrical and instrumentation design principles, including wiring diagrams, control logic, and instrumentation specifications. Familiarity with safety, regulatory standards, and codes relevant to the oil and gas industry (e.g., IEC, NEC, API, etc.). Soft Skills : Strong analytical and problem-solving skills. Excellent communication skills, both written and verbal. Ability to work independently and as part of a team. Attention to detail with the ability to handle multiple tasks and projects simultaneously. Certifications (Optional) : Relevant professional certifications (e.g., Chartered Engineer, PMP, etc.) are a plus. Preferred Qualifications: Experience working on electrical and instrumentation systems for offshore platforms, refineries, or petrochemical plants. Familiarity with project management tools and techniques. Knowledge of SCADA, DCS, or PLC systems and instrumentation in hazardous areas. Experience with advanced simulation and design software tools. Job Types: Full-time, Permanent Pay: ₹14,917.06 - ₹55,362.18 per month Benefits: Paid sick time Paid time off Schedule: Fixed shift Experience: Electrical engineering: 10 years (Required) industrial Project Handling: 10 years (Required) Electrical design: 10 years (Required) Work Location: In person

ViewRay Systems is currently seeking an MRI Sequence Development Scientist, experienced in sequence development, who will share our passion for conquering cancer and help us in the development of novel cancer therapy systems. Responsibilities : Develop innovative high-speed imaging techniques that capture anatomy motion in real-time for both 2D and 3D scans. Develop imaging techniques, tailored for the radiation therapy space, that will provide the required spatial integrity and image quality. Develop the required calibration sequences and workflow for image guided therapy systems. Work with a cross-functional team of engineers and scientists to translate promising prototypes into product while leading technical/clinical risk retirement. Provide technical expertise and support for projects with internal and external collaborators. Follow guidelines of internal design controls and change controls processes. Required Qualifications Graduate degree in Physics, Applied Physics, Electrical Engineering, Biomedical Engineering or equivalent. Strong background in MRI physics and pulse sequence design. Expertise in MR imaging techniques and clinical applications. Substantial experience in C++/C software design, implementation, and coding. Experience in working with internal and external partners. Valued Qualifications Ph.D. Physics, Applied Physics, Electrical Engineering, Biomedical Engineering or equivalent. Experience using Matlab for signal and image processing. Desire and bandwidth to expand to other disciplines. Experience with E&M modeling. Experience in data acquisition and spectrometry. Job Type : Full-time Work Location: In person in Chandigarh, India: Relocate before starting work VIEWRAY SYSTEMS INDIA PRIVATE LIMITED PLOT NO. A-40A, INDUSTRIAL FOCAL POINT, PHASE 8-EXTN, Sector 59, S.A.S. Nagar (Mohali), Distt. Mohali, Punjab -160059 Benefits: Competitive salary and benefits package Job Type: Full-time Pay: From ₹35,000.00 per month Schedule: Day shift Ability to commute/relocate: Kharar, Mohali, Punjab: Reliably commute or planning to relocate before starting work (Preferred) Work Location: In person

Responsibilities & Key Deliverables a) Gasoline engine Optimization involving activities like, steady state performance and emission developement, including but not limited to combustion system, injection system, exhaust after-treatment system. b) Gasoline vehicle calibration involving, vehicle emission developement, vehicle calibration, drivability, environmental corrections, cold start and OBD c) Emission & Performance Robustness and homologation trials for engines type approval. d) Develop competency on methologies and tools calibration development e) Laise with EMS supplier and other key system suppliers for system selection and optimization. f) Laise with CFT like Vehicle Integration, NVH, Electricals, Performance simulation, Engine development centre, Reliability and Service for engineering targets delivery. g) Plan for the day-today calibration activities and maintain a project tracker. h) Collect & collate benchmark data. i) Analyse the issues arising out of test to confirm the design by root cause analysis of the problems / issues by using various problem solving techniques like Global 8D or other problem solving tools. Skills critical for the role: 1. Basic understanding of engine architecture 2. Basic understanding of combustion system and emission control. Effects of combustion hardware on performance and emission. 3. Knowledge of calibration softwares -INCA and other data acquisition tools. 4. Basic coding skills in Matlab and /or Phython 5. Knowledge of vehicle sub systems which affect vehicle performance parameters 6. Knowledge of steady state engine development on engine bench 7. Knowledge of EMS system component selection and evaluation methods 8. Knowledge of vehicle calibration, comfort functions, drivability, IOBD etc 9. Understanding of Intake, exhaust, cooling and fuel system interfaces on engine performance and emissions. 10. Failure analysis, root cause analysis 11. Awareness of emission cycles, test procedures, various norms and regulation Experience 10-13 years post BE/BTech 7-10 year post ME/Mtech Industry Preferred Automobile Qualifications B.E./B.Tech/M.E/M.Tech General Requirements 1) Should have worked in atleast one MPFI engine development program from start of calibration to SOP Job Segment: Engineering Manager, Engineer, Engineering, Automotive

Looking for challenging role? If you really want to make a difference - make it with us Can we energize society and fight climate change at the same time? At Siemens Energy, we can. Our technology is key, but our people make the difference. Brilliant minds innovate. They connect, create, and keep us on track towards changing the world’s energy systems. Their spirit fuels our mission. Our culture is defined by caring, agile, respectful, and accountable individuals. We value excellence of any kind. Sounds like you? Your new role – challenging and future- oriented: The primary contents of the work will be: Create PSCAD model Conduct control parameter study Conduct dynamic performance study Conduct Sub-synchronous torsional Interaction study Conduct harmonic stability study Conduct interaction study Conduct Black start study Benchmark different test environment Short circuit studies for OWP Read, analyze and interpret customer requirement Apart from these primary functions, the incumbent shall also be expected to perform the following functions: Innovate and work out new techniques and solutions Active collaboration with Siemens Energy, Germany and other countries Impart training to external parties like clients Be willing to take over roles of other team members if the situation demands. We don’t need superheroes, just super minds: Desirable technical skills: PSCAD, MATLAB, Simulink GIT Having a previous experience of working on HVDC - VSC projects would be an added advantage. Qualification: B.E. / B.Tech / M. Tech - electrical with specialization in power system Experience - 10 Yrs (5 Yrs relevant in HVDC) Location - Gurugram and Chennai

Location- Pune, India Work Type: Full-time | On-site Compensation (Yearly): INR 2200000 - 2500000 Notice Period: Immediate Joiner 15 days If shortlisted, we will reach out via WhatsApp and email – please respond promptly . About The Client We are hiring for a leading engineering partner delivering embedded and Linux-based software solutions in medical tech, automation, and mobility. They specialize in real-time, safety-critical, and UI-driven applications using C++. Job Summary We are looking for a seasoned software engineer with 8–10+ years of experience in developing and delivering mission-critical products. The ideal candidate has a strong foundation in C++, experience with scientific or scripting languages like Python or MATLAB, and is comfortable working in Unix environments. Requirements BS/MS/PhD in Computer Science, Electrical Engineering, or related field Minimum 4+ years experience as a Software Developer (Algorithm) Proven track record in delivering complex, high-reliability software systems Strong proficiency in C++, Python, and QT framework Expert in C++; working knowledge of Python or MATLAB Familiarity with Unix/Linux systems Preferred Experience Background in medical devices or regulated product development Experience with responsive web applications Exposure to AWS/cloud infrastructure, CI/CD pipelines, and unit testing Show more Show less

1. *Research projects*: Students working on research projects involving data analysis, algorithm development, or software development can benefit from this JD. 2. *Technical skills*: The JD highlights essential technical skills, such as MATLAB and Python programming, data analysis, and algorithm development, which are valuable for thesis and dissertation work. 3. *Collaboration*: The JD emphasizes collaboration with cross-functional teams, which can be applied to academic research projects involving multiple stakeholders. 4. *Research experience*: Emphasize experience with research design, methodology, and data analysis. 5. *Academic writing*: Highlight skills in academic writing, publishing, and presentation. 6. *Domain-specific knowledge*: Specify knowledge requirements relevant to the research domain (e.g., signal processing, machine learning). Show more Show less

Job Description Summary As a Control & Protection Application Engineering Manager, you will be leading Engineering team and working across two engineering disciplines. Solution and engineering centre in all aspects of HVDC Control & Protection system, supports the design and implementation of HVDC Control & Protection Systems by analysing customer requirements, assessing the necessary deviation from standard solutions, and also provide technical solution that meets the, project delivery and Tender objectives. This includes the following. Developing organizational talent Engineering process management Provide technical guidance. Drive consistent design practices and common global processes for projects. Interface with customers Job Description Essential Responsibilities As a Control System Engineering Manager, you will be responsible for leading a team that designs, develops, configuration and Verification of HVDC Control & Protection Systems, drive consistent design practices, common global processes for projects implementation and also provide technical solution that meets the project and Tender objectives. Development of PSCAD Network Model, Control MATLAB application Model, Control system block diagram, ONM Manuals. MATLAB application unit and system integration testing. PSSE/PSCAD and PSSE/RSCAD Power system network conversion, modelling and verification HVDC System in electromagnetic transient tools like PSCAD, EMTP-RV etc. Plant modelling in various simulation tools (MATLAB, RSCAD, PSCAD etc) and its verification. Dynamic performance studies using both offline and online simulation tools Control parameters tuning to meet grid stability criteria specified in customer technical specifications. Algorithm and state machine development in MATLB Simulink Conversion of MATLB Simulink algorithms to other suitable time domain library models Execute and provide guidance for the analysis / evaluation of assigned projects that meet business standards, practices and procedures and the product / program requirements Support improvements to existing algorithm/strategies for power fault recovery or instability issues during DPS studies Ensure that project plans contain the necessary activities and studies required to meet the requirements of the customer and the proposed technical solution. Responsible for recruiting, coaching, and/or developing organizational talent. Responsible for providing direction and/or guidance to exempt specialists and/or supervisory staff who exercise significant latitude and independence in their assignments. May supervise non-exempt employees. Manage the engineering resources, workload, schedule and project milestones. Play a key role in engineering design reviews and technical leadership, identifying potential project risks and technical weaknesses and proposing safe, reliable and compliant solutions. Works closely with internal and external customers to arrive at engineering specifications that optimise the commercial potential of new and existing products. Ensures that the available technologies and components are appropriately exploited in product design. Keeps the organization's vision and values at the forefront of decision making and action. Builds strategic partnerships to further departmental and organizational objectives. Develops and executes organizational and operational policies that affect one or more groups by utilizing technical/professional knowledge and skills. Define the project work breakdown structure (WBS), resources and skill levels required to meet the delivery timescales. Qualifications / Essential Requirements Engineering degree or equivalent including power systems and power electronics subjects or proven equivalent knowledge and experience in HVDC business. More than 10 years’ experience in HVDC industry including HVDC station equipment and design Strong sense of urgency and ability to identify and manage team organisational risks Proven skills in managing and leading team with strong technical background Experienced in Protection & Control system design application and have strong problem-solving skills. Strong oral and written communication skills. Strong interpersonal and leadership skills. Demonstrated ability to analyze and resolve problems. Demonstrated ability to lead programs / projects. Ability to document, plan, market, and execute programs. Established project management skills. Proven technical leadership in a complex system engineering development environment Proactively serves on cross functional leadership teams; Makes decisions independently; Pulls in experts when needed. Demonstrates track record of designing quality systems/components that exceed design reqs, beat cost targets, and exceed reliability targets Desired Characteristics Knowledge of applicable electrical standards such as IEC 61850, IEC 62351, IEC 12207, IEEE 15288, IEC 25010, IEC 27032, NERC/CIP Process improvement or RCA experience or certification Ability to define requirements and ensure they adhere to best practice Experienced in technical leadership Experience working in HVDC industry Experience in HVDC Protection is added advantage Additional Information Relocation Assistance Provided: Yes Show more Show less

🚀 We’re Hiring: Electronics & Communication Engineers Focus: RF Data Analytics · Radar Signal Processing · Electronic Warfare | Experience: 1 – 5 yrs | Age Limit: ≤ 30 yrs Why join Crimson? Work on next-generation radar and EW programs that safeguard critical national assets. Turn terabytes of raw I/Q captures into real-time intelligence alongside cross-functional experts. Ship your code from lab prototype to live field deployment and see immediate impact. What you’ll do Acquire – Automate high-throughput downloads, cataloguing and integrity checks of multi-gigabyte RF datasets. Clean & Sanitize – Write Python/Matlab routines for noise filtering, interference rejection and metadata standardisation. Transform – Build DSP modules to demodulate, resample and convert raw I/Q streams into emitter-level feature vectors. Ingest – Design robust ETL workflows into local and shared SQL/NoSQL databases with geospatial indexing. Analyse – Produce geospatial heat-maps, time-frequency plots and anomaly alerts that drive mission decisions. Present – Craft dashboards and concise reports that translate complex RF metrics into clear operational insight. Maintain – Handle routine calibration of RF front-ends, firmware upgrades and Linux/GPU server upkeep. Must-have qualifications Degree: M.Tech / ME / B.Tech / BE / M.Sc. in ECE, Telecom, Signal Processing, Radar Tech, Defence Electronics, or MCA with strong tech focus. Experience: 1 – 5 yrs hands-on with electronics, communications or signal-processing systems. Core knowledge: Electronic Support Measures (ESM), radar theory, communication waveforms, RF chain components. Tools: Matlab (or equivalent), Python (NumPy, SciPy, Pandas, PyTorch/SciKit-DSP-Comm), Git, Docker, Linux. Data skills: Building ETL pipelines, designing database schemas and basic DevOps practices. Nice-to-have superpowers GNU Radio and SDRs (USRP, HackRF) or Keysight/NI test equipment. REST API development with FastAPI or Flask. Geospatial tooling (GDAL, PostGIS, QGIS, ArcGIS). Familiarity with MIL-STD metadata formats (ST 0601/0603, ASTERIX) and radar messaging. Defence-sector clearance eligibility and a passion for national-security tech. What we offer Mission impact: Direct contribution to nationally strategic programmes with tangible outcomes. Growth runway: Sponsored certifications (DSP, EW, cloud), conference travel and mentoring from senior defence scientists. Cutting-edge lab: Petabyte-scale RF archive, GPU clusters and dedicated SDR testbeds. Competitive package: Market-aligned salary, performance bonus, medical & accident insurance, 30 days paid leave. How to apply Prepare your CV (PDF) and a one-page cover letter describing an RF or large-scale data-pipeline project you’ve handled. Deadline: 11 June 2025 (rolling reviews — apply early for priority). Show more Show less

VACANCY NOTICE POSITIONS AVAILABLE AT BIOFOUNDRY, ICGEB, NEW DELHI Department of Biotechnology (DBT), Govt of India, has funded a Biofoundry project at ICGEB to perform AI-ML-guided strain engineering of yeast and E. coli . The following positions are available for the project initially for one year, which may be extended further based on the performance and the project's tenure. These are temporary project positions whose durations are only up to the tenure of the DBT-funded project. 1. Project Scientist II -(5 positions) (i) Position area – Computational Biology (PI – Dr. Dinesh Gupta) Job description: Develop and implement computational pipelines for high-throughput omics data (e.g., genomics, transcriptomics, metabolomics) Build and optimize machine learning models to guide strain design and pathway optimization Integrate multi-modal datasets into cohesive systems biology models Collaborate with wet-lab scientists to close the DBTL loop and improve biofoundry workflows Contribute to software tool/database development, and presentations Qualifications: · Essential: o PhD in Bioinformatics/Computational Biology/ Systems Biology, Computer Science, or related field. Strong programming skills (Python, R, or equivalent) o Experience with multi-omics analysis, metabolic modelling o Experience of using or developing ML/AI techniques o Experience of Structural Bioinformatics, molecular modelling and running MD simulations o Familiarity with synthetic biology concepts and genome engineering o Excellent communication and collaboration skills o Publications in the above mentioned experience areas · Desirable: o Experience of working in a biofoundry project or synthetic protein design, bioprocess optimization. o Experience of working in a HPC environment (ii) Position area – Systems Biology (PI – Dr. Shireesh Srivastava) Job description: The position involves computational design and analysis of metabolic pathways in E. coli and yeast using methods of metabolic systems biology such as Flux Balance Analysis, Computational Biology tools, and Integration of Omics data. The candidate will also be responsible for timely conduct of analyses and preparation of reports, maintenance of computers, software and databases related to the project, and participation in training activities conducted by the group. Qualifications: Ph.D. in Biotechnology, Computational Biology, Chemical Engineering or related fields. Candidate must be well versed in Windows and Linux-based operating systems and have prior experience in computational analyses. Candidates with prior knowledge of MATLAB, Metabolic modelling and analysis, Metabolic databases, COBRA toolbox, Omics data analysis will be preferred. (iii) Position area - Functional genomics (PI – Dr. Pavan Jutur) Job description: This position involves a motivated functional genomics expert to design and execute experiments unraveling gene function within our biofoundry. The role heavily involves integrating and analysing multi-omics data to optimise strain engineering, collaborating with biologists and data scientists for accelerated R&D. Qualifications: Ph.D. in Biotechnology, Life Sciences, or a related field with at least 3 years of experience is required. Mandatory experience handling microbial strains, with knowledge in omics biology. (iv) Position area – Yeast engineering (PI -Dr. Naseem Gaur) Job description: The candidate will be responsible for developing genetically engineered yeast strains as per the project requirements. This will involve synthetic biology and metabolic engineering approaches to build the customised engineered yeast strains as a chassis for biomanufacturing. Qualifications: Ph.D. in Biotechnology or related field with 3 years of experience. Candidates with a strong molecular biology background, analytical skills, and critical thinking ability will be preferred. (v) Position area – E. coli engineering (PI – Dr. Shams Yazdani) Job description: The work will involve engineering the genome of E. coli for producing various fuels and chemicals. The metabolic pathway design, synthesis, assembly and integration in the genome with the help of various genetic/genome engineering tools will be the major part of the project. Protein engineering, wherever needed, will also be involved in the project. Qualifications: Ph.D. in Biotechnology or related field with 3 years of experience. The candidate with strong molecular biology, synthetic biology, genome engineering, and metabolic engineering will be preferred. Salary – Rs 67,000 per month + HRA 2. Project Associate II (2 positions) (i) Position area – Yeast Engineering (PI – Dr. Naseem Gaur) Job description: The candidate will be responsible for executing molecular biology and biochemical experiments related to the development of genetically engineered yeast strains and the bioprocess development of engineered yeast strains for product formation. Qualifications: M.Sc./M.Tech in Biotechnology or a related field with 2 years of experience (ii) Position area – E. coli Engineering (PI – Dr. Shams Yazdani) Job description: Design and construction of pathway genes in E. coli Qualifications: M.Sc./M.Tech in Biotechnology or related field with 2 years of experience Salary – Rs 35,000 per month + HRA 3. Project Associate I (2 positions) (i) Position area – Yeast Engineering (PI - Dr. Naseem Gaur) Job description: The candidate will be responsible for executing molecular biology and biochemical experiments related to the development of genetically engineered yeast strains and the bioprocess development of engineered yeast strains for product formation. Qualifications: M.Sc./M.Tech in Biotechnology or a related field (ii) Position area – E. coli Engineering (PI - Dr. Shams Yazdani) Job description: Construction and testing the engineered E. coli for product formation via various analytical techniques. Qualifications: M.Sc./M.Tech in Biotechnology or related field Salary – Rs 31,000 per month + HRA 4. Project Manager (1 position) (PI – Dr. Ramesh Sonti) Job description: Managing the Biofoundry project Qualifications: PhD in Science or ME/MTech with 5 years of experience Salary – Rs 1,25,000 per month (Consolidated) 5. Administrative Assistant (1 position) (PI – Dr. Ramesh Sonti) Job description: Administrative support to the Biofoundry project Qualifications: BSc or BA in any discipline Salary – Rs 18,000 per month + HRA 6. Technical Manager (2 positions) (i) Position area – Yeast Engineering (Dr. Naseem Gaur) Job description: Technical support to Scientific staff members Qualifications: BSc or 3yr Diploma in Engineering & Technology (ii) Position area – E. coli engineering (Dr. Shams Yazdani) Job description: Maintaining analytical equipments Qualifications: BSc or 3yr Diploma in Engineering & Technology Salary – Rs 20,000 per month + HRA 7. Lab Assistant (1 position) (PI – Dr. Ramesh Sonti) Job description: Lab inventory maintenance, glassware/plasticware cleaning, etc Qualifications: BSc in any field Salary – Rs 20,000 per month + HRA Interested candidates should email their latest curriculum vitae and cover letter (Cover letter must mention pertinent skills) with a detailed description of relevant experience to icgeb.biofoundry@gmail.com with Subject “Application for <(name of the PI)> Position”. Only short-listed candidates will be contacted for an interview. Closing date for applications: 16 th June 2025 Show more Show less

Our vision is to transform how the world uses information to enrich life for all . Micron Technology is a world leader in innovating memory and storage solutions that accelerate the transformation of information into intelligence, inspiring the world to learn, communicate and advance faster than ever. Key Responsibilities Develop and validate computational models for the process, structure, and multi-physics analysis with FEM and CFD tools (e.g., Abaqus, ANSYS Fluent, COMSOL, Star-CCM). Conduct simulations and analyze results to optimize designs and ensure compliance with industry standards. Ability to comprehend statistical process analysis and control systems. Utilize data analysis and machine learning techniques to improve the accuracy and efficiency of simulations. Collaborate with cross-functional teams to support product development and troubleshoot engineering issues. Prepare technical reports and presentations to communicate analysis results and recommendations. Stay updated with the latest advancements in FEA, CFD, numerical methods, computational geometry, and machine learning. Qualifications Master's or PhD degree in Chemical Engineering, Applied Chemistry, Applied Physics, Materials Science, or related fields. 5+ years of experience in computational modeling. Experience with numerical methods, scientific computing and scripting languages (e.g., Python, MATLAB, FORTRAN, C++). Experience with data analysis tools and machine learning frameworks (e.g., Python, TensorFlow, etc.). Familiar with FEA, FVM, PFM, HPEM, methods and implementations. Excellent problem-solving skills and attention to detail. Ability to work independently and collaboratively in a fast-paced environment. Experience with HPC on Linux environment Experience with computational geometry and mesh generation techniques. Preferred Skills Knowledge of multi-physics simulations and advanced material models. Strong background in computational fluid dynamics, thermodynamics, physics, chemistry, and statistical/data analysis. Strong communication and presentation skills. Ability to manage multiple projects and meet deadlines. About Micron Technology, Inc. We are an industry leader in innovative memory and storage solutions transforming how the world uses information to enrich life for all . With a relentless focus on our customers, technology leadership, and manufacturing and operational excellence, Micron delivers a rich portfolio of high-performance DRAM, NAND, and NOR memory and storage products through our Micron® and Crucial® brands. Every day, the innovations that our people create fuel the data economy, enabling advances in artificial intelligence and 5G applications that unleash opportunities — from the data center to the intelligent edge and across the client and mobile user experience. To learn more, please visit micron.com/careers All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, veteran or disability status. To request assistance with the application process and/or for reasonable accommodations, please contact hrsupport_india@micron.com Micron Prohibits the use of child labor and complies with all applicable laws, rules, regulations, and other international and industry labor standards. Micron does not charge candidates any recruitment fees or unlawfully collect any other payment from candidates as consideration for their employment with Micron. Show more Show less

Key Responsibilities: Assist with the design and execution of research projects Collect, organize, and analyze data using various research methodologies Prepare and review research documents, reports, and presentations Conduct literature reviews and summarize relevant research articles Collaborate with other team members and researchers to facilitate research activities Ensure the quality and accuracy of research data and findings Support researchers in experimental tasks and lab work (if applicable) Qualifications : Education: BE/B.Tech (Recent Graduates) or relevant degree Experience: 0-1+ year(s) of experience in research projects Skills : Strong analytical and problem-solving skills Familiarity with data analysis software (e.g., MS Excel, MATLAB, Python, or R) Excellent communication skills (both verbal and written) Ability to work independently as well as part of a collaborative team Attention to detail and ability to manage time effectively

Job Description: Experience: At least 2+ Years Location: Pune (chinchawad MIDC), Maharashtra. Duties & Responsibilities: · Design and develop motors, considering specific requirements and performance objectives. · Utilize 2D and 3D electrical machine design software (e.g., ANSYS Maxwell, Motor-CAD) to create detailed motor designs and models. · Conduct electromagnetic analysis and simulations to evaluate motor performance, efficiency, and electromagnetic forces. · Optimize motor designs through iterative improvements and simulations, aiming for enhanced efficiency and reduced losses. · Collaborate with cross-functional teams, including electrical engineers, mechanical engineers, and project managers, to understand requirements and ensure designs align with project goals. · Conduct feasibility studies and analyze design proposals to identify potential risks, challenges, and opportunities for improvement. · Perform thermal analysis to assess motor temperature and optimize cooling systems to ensure motor reliability and longevity. · Conduct structural analysis and simulations to ensure motor components can withstand mechanical stresses and vibrations. · Create comprehensive technical documentation, including design specifications, test plans, and performance reports. · Stay updated with the latest motor design trends, technologies, and industry standards to propose innovative solutions and enhancements. · Collaborate with suppliers and vendors to source motor components and materials, ensuring their compatibility with design requirements. · Provide support and guidance during the motor prototyping and testing phases, addressing any design-related issues or modifications as necessary. Required Skills: · Bachelor's or Master's degree in Electrical Engineering, Mechanical Engineering, or a related field. · Minimum of 1 years of experience as a Motor Design Engineer, with a strong background in motor design and 2D/3D electrical machine design. · Proficiency in 2D and 3D electrical machine design software (e.g., MATLAB, ANSYS, Motor-CAD) to create detailed designs and conduct simulations. · In-depth knowledge of motor design principles, including electromagnetic theory, motor topologies, and winding configurations. · Strong analytical and problem-solving skills, with the ability to use simulation tools and data analysis to optimize motor designs. · Familiarity with thermal analysis and cooling systems for motor applications. · Understanding of mechanical engineering principles related to motor design, such as structural analysis and vibration analysis. · Good communication and collaboration skills to effectively work with cross-functional teams. · Detail-oriented with a focus on accuracy and precision in design work and simulations. · Ability to manage multiple projects and prioritize tasks effectively to meet deadlines. Preferred Qualifications: · Bachelor's or Master's degree in Electrical Engineering, Mechanical Engineering, or a related field. · Minimum of 1 years of experience as a Motor Design Engineer, with a strong background in motor design and 2D/3D electrical machine design. · Proficiency in 2D and 3D electrical machine design software (e.g., MATLAB, ANSYS, Motor-CAD) to create detailed designs and conduct simulations. · In-depth knowledge of motor design principles, including electromagnetic theory, motor topologies, and winding configurations. · Strong analytical and problem-solving skills, with the ability to use simulation tools and data analysis to optimize motor designs. · Familiarity with thermal analysis and cooling systems for motor applications. · Understanding of mechanical engineering principles related to motor design, such as structural analysis and vibration analysis. · Good communication and collaboration skills to effectively work with cross-functional teams. · Detail-oriented with a focus on accuracy and precision in design work and simulations. Ability to manage multiple projects and prioritize tasks effectively to meet deadlines. Show more Show less

What You’ll Do The Senior Engineer is responsible for power and control system development related to our Distributed Energy Resource Management System (DERMS) for microgrid products. This role requires defining methodology for energy management, maintaining power system models, developing test in control system models to ensure the functionality of the applications related to power distribution industry. This position works closely with Control System team and Eaton Research Lab (ERL) in Electrical sector business of the Eaton. A self-motivated individual is imperative; one who is always looking for learning new technology and ways to improve the user experience, stay abreast with modern software development techniques, tools to meet launch deadlines. Design, implement, and maintain efficient, reliable, and reusable power system and control strategies for power management products. Analyze models in Power system development environment and propose innovative solutions for control algorithm running on edge or cloud. Apply the modeling process in the design of controllers and development techniques for improvement of distributed energy management systems. Write power system and control system tests plan for verification and validation. Participate in the investigation of problems by gathering enough information to find the root causes and fix them in real time modeling environment Ready for technical collaboration or partnership with Eaton internal stakeholders. Participate in all stages of the development cycle and ready for understanding the concepts of operation. Ability to learn the power system and control system technologies used in distributed energy management products. Qualifications Required: University degree in relevant technical from an accredited institution. Preferred: University degree in electrical or Electronics engineering from an accredited institution. Minimum experience of 5 years in Power and Control System products. Skills Experience utilizing best practices in Power and control engineering. Knowledge of Microgrid and grid operations are preferable. Knowledge of Power system and power electronics modeling and controlling tools and languages (Typhoon/RTDS/OPAL-RT/Python/ MATLAB & Simulink/ C/C++/ script, etc. any one) must. Strong learning, reviewing and debugging skills. Strong in Power & Control System and Power Electronics domain. Proficient understanding of issue and Project Tracking software (JIRA, Azure, TFS, etc.). Excellent verbal and written English skills in relation to technical documentation required. Critical thinking and problem-solving skills.Ability to understand the intricate technical details of how a Distributed Energy Resources (DER) and their microgrid product functions. Ability to learn and interact with several different organizational levels and geographical locations to solicit information and translate into meaningful technology readiness level. Highly motivated and self-driven, ability to work on projects alone or with team. Uses judgment, creativity, and sound technical knowledge to generate novel efficient and robust power and control system for grid intelligence. ]]> Show more Show less

Applications are invited for the Post of Junior Research Fellowship (JRF) for the DST_SERB Funded Project in the School of Electronics Engineering (SENSE), FILENO. CRG/2023/005678, Vellore Institute of Technology (VIT). Title of the Project : EEG-based investigation of the fundamental frequency coding for source segregation in elderly normal-hearing adults. Qualification : First division Master's Degree in Electronics and Communication Engineering or equivalent with specialization in Signal Processing or B.Tech. in ECE/EIE/EEE/ETC from a recognized University or equivalent. Desirable: GATE/NET qualified; however, non-GATE/NET candidates are also encouraged to apply. Describe if any Candidates must have strong knowledge of Signal Processing and MATLAB software. Additionally, knowledge of Deep Neural Networks will be given more preference. The candidate will acquire the neural representations of speech signals using the EEG device from human subjects (younger and older subjects), apply signal processing techniques to these neural representations to test the hypotheses, and will be responsible for writing project reports, papers, and coordinating project activities. Stipend : 31,000/- (for starting 6 months) and 35,000 (last year) per month for GATE/NET-qualified candidates . Sponsoring Agency : DST-SERB, Government of India. Duration : 1.5 years Principal Investigator : Dr. Anantha Krishna Chintanpalli , Professor in Communication Engineering, School of Electronics Engineering, Vellore Institute of Technology (VIT), Vellore - 632 014, Tamil Nadu. Co-Principal Investigator : Dr. R. Sivakumar Professor in Sensor and Biomedical Technology School of Electronics Engineering Vellore Institute of Technology (VIT) Vellore - 632 014, Tamil Nadu. Send your CV along with relevant documents about the details of qualifications, scientific accomplishments, experience (if any), and the latest passport-size photo on or before 20/06/2025. Apply online http://careers.vit.ac.in. No TA and DA will be paid for appearing in the interview. Shortlisted candidates will be called for an interview at a later date, which will be intimated by email. Candidates will be shortlisted based on their merit and as per the requirements of the project. The selected candidate will be expected to join on or before 1st August 2025. The selected candidate may be permitted to register for the PhD program of VIT Vellore subject to fulfilling the requirements of the PhD qualification process as per the institute norms.

ViewRay Systems is currently seeking an MRI Sequence Development Scientist, experienced in sequence development, who will share our passion for conquering cancer and help us in the development of novel cancer therapy systems. Responsibilities : Develop innovative high-speed imaging techniques that capture anatomy motion in real-time for both 2D and 3D scans. Develop imaging techniques, tailored for the radiation therapy space, that will provide the required spatial integrity and image quality. Develop the required calibration sequences and workflow for image guided therapy systems. Work with a cross-functional team of engineers and scientists to translate promising prototypes into product while leading technical/clinical risk retirement. Provide technical expertise and support for projects with internal and external collaborators. Follow guidelines of internal design controls and change controls processes. Required Qualifications Graduate degree in Physics, Applied Physics, Electrical Engineering, Biomedical Engineering or equivalent. Strong background in MRI physics and pulse sequence design. Expertise in MR imaging techniques and clinical applications. Substantial experience in C++/C software design, implementation, and coding. Experience in working with internal and external partners. Valued Qualifications Ph.D. Physics, Applied Physics, Electrical Engineering, Biomedical Engineering or equivalent. Experience using Matlab for signal and image processing. Desire and bandwidth to expand to other disciplines. Experience with E&M modeling. Experience in data acquisition and spectrometry. Job Type : Full-time Work Location: In person in Chandigarh, India: Relocate before starting work VIEWRAY SYSTEMS INDIA PRIVATE LIMITED PLOT NO. A-40A, INDUSTRIAL FOCAL POINT, PHASE 8-EXTN, Sector 59, S.A.S. Nagar (Mohali), Distt. Mohali, Punjab -160059 Benefits: Competitive salary and benefits package Job Type: Full-time Pay: From ₹35,000.00 per month Schedule: Day shift Ability to commute/relocate: Kharar, Mohali, Punjab: Reliably commute or planning to relocate before starting work (Preferred) Work Location: In person

Technical Lead - SW Development & Testing Location Hinjewadi, Pune - Maharashtra, India Pacesetting. Passionate. Together. HELLA, one of the leading automotive suppliers worldwide, has shaped the industry with innovative lighting systems and vehicle electronics. In addition, the company is one of the most important partners of the aftermarket and independent workshops. What motivates us: Shaping the mobility of tomorrow and fostering the central market trends such as autonomous driving, efficiency and electrification, connectivity and digitization as well as individualization. Every day, 36,000 employees worldwide are committed to this with passion, know-how and innovative strength. YOUR TASKS We are seeking a highly skilled and motivated engineer to join our team responsible for the development and testing of automotive components, including sensors and actuators. The ideal candidate will have a strong background in electronics and instrumentation, along with proficiency in programming and various development tools. Key Responsibilities: Research, design, implement, and manage software programs for automotive components. Test and evaluate new programs, identifying areas for modification and developing these modifications. Develop and follow quality assurance procedures to ensure high standards. Collaborate with stakeholders to define project scope, estimate timelines, and design features. Drive conversations with internal and external stakeholders to ensure software meets business objectives. Participate in code reviews, addressing any defects or design issues. Ensure on-time delivery of product features as per the defined schedule and roadmap. Perform Model-in-the-Loop (MIL) and Software-in-the-Loop (SIL) testing. Provide technical guidance to team members. Required Experience and Skills: Strong knowledge of electronics and instrumentation. Advanced experience with tools like IBM DOORS and PTC Integrity. Proficiency in programming with C, C++, Git scripting, and Simulink. Understanding of the software development life cycle (SDLC). Knowledge of hardware design, requirements, and schematics. Familiarity with Rhapsody and IAR Embedded Workbench. Experience with communication protocols such as CAN, LIN, and other automotive protocols. Proficiency in using debuggers, test equipment like DSO, function generators, and tools like CANalyzer and CANoe. Ability to develop unit tests for code components or complete applications. Knowledge of software testing principles. Experience with TPT and MATLAB-Simulink is an added advantage. Strong analytical, problem-solving, and debugging skills. Excellent written and verbal communication skills in English. YOUR QUALIFICATIONS BE /B. Tech/ M.E/ M. Tech in Electronics/Electronics & Communication/Industrial Electronics 7- 12 years of experience in Automotive Industry Take the opportunity to reveal your potential within a global, family-run company that offers you the best possible conditions for progressing in your career. Please send us your application through our careers portal, citing reference number req16469. HELLA India Automotive Pvt Ltd. Rimsha Shaikh

- 5+ years of analyzing and interpreting data with Redshift, Oracle, NoSQL etc. experience - Experience with data visualization using Tableau, Quicksight, or similar tools - Experience with data modeling, warehousing and building ETL pipelines - Experience in Statistical Analysis packages such as R, SAS and Matlab - Experience using SQL to pull data from a database or data warehouse and scripting experience (Python) to process data for modeling The role of the Sub Same Day business is to provide ultrafast speeds (2 hour and same day scheduled) and reliable delivery for selection that customers fast. Customers find their daily essentials and a curated selection of Amazon’s top-selling items with sub same day promises. The program is highly cross-functional in nature, operations intensive and requires a number of India-first solutions to be created, which then need to be scaled WW. In this context, SSD is looking for a talented, driven and experienced Business Analyst It is a pivotal role that will contribute to the evolution and success of one of the fastest growing businesses in the company. Joining the Amazon team means partnering with a dynamic and creative group who set a high bar for innovation and success in a fast-paced and changing environment. The Business Analyst is responsible for being able to influence critical business decisions using data and providing insight to category teams to be able to act. The successful candidate needs to have : - A passion for numbers, data and challenges. - High attention to detail and proven ability to manage multiple, competing priorities simultaneously. - Excellent verbal and written communications skills. - An ability to work in a fast-paced, complex environment where continuous innovation is desired. - Bias for action and ownership. - A history of teamwork and willingness to roll up one’s sleeves to get the job done. - Ability to work with diverse teams and people across levels in an organization - Proven analytical and quantitative skills (includes the ability to effectively use tools such as Excel and SQL) and an ability to use hard data and metrics to back up assumptions and justify business decisions. Key job responsibilities Key Responsibilities - Influence business decisions with data. - Use data resources to accomplished assigned analytical tasks relating to critical business metrics. - Monitor key metrics and escalate anomalies as needed - Provide input on suggested business actions based on analytical findings. Experience in data mining, ETL, etc. and using databases in a business environment with large-scale, complex datasets Experience with AWS solutions such as EC2, DynamoDB, S3, and Redshift Our inclusive culture empowers Amazonians to deliver the best results for our customers. If you have a disability and need a workplace accommodation or adjustment during the application and hiring process, including support for the interview or onboarding process, please visit https://amazon.jobs/content/en/how-we-hire/accommodations for more information. If the country/region you’re applying in isn’t listed, please contact your Recruiting Partner.

- 3+ years of analyzing and interpreting data with Redshift, Oracle, NoSQL etc. experience - Experience with data visualization using Tableau, Quicksight, or similar tools - Experience with data modeling, warehousing and building ETL pipelines - Experience in Statistical Analysis packages such as R, SAS and Matlab - Experience using SQL to pull data from a database or data warehouse and scripting experience (Python) to process data for modeling At Amazon, we're working to be the most customer-centric company on earth. To get there, we need exceptionally talented, bright, and driven people. We are looking for a Business Intelligence Engineer in the Amazon Grocery Data and Tech. As a Business Intelligence Engineer, you will be responsible for execution of rapidly evolving complex demands, design, development, testing, deployment and operations of multiple analytical solutions. You will be responsible for delivering some of our most strategic analytics initiatives. You will create insights that support all of Amazon’s grocery businesses and have a significant impact on Amazon’s top-line and competitive position. A successful candidate will bring deep technical expertise, strong business acumen and judgment, ability to define ground breaking products, desire to have an industry wide impact and ability to work within a fast-moving environment in a large company to rapidly deliver services that have a broad business impact. They will define metrics to measure business performance and drive efficiency improvements. About the team Amazon Grocery Data and Technology (GDT) team is the central data team for Amazon Grocery, consisting of engineering teams (BIEs/DEs/SDEs). We are the direct owner of (a) Infrastructure and services used for reading, processing, reporting and enrichment of grocery data; (b) Productivity tools; (c) Reporting solutions for worldwide 1P and 3P customers across the following businesses: Amazon Fresh Grocery (AFG), Whole Foods Market (WFM), Amazon Go, Amazon Grocery Partners, etc. Experience with AWS solutions such as EC2, DynamoDB, S3, and Redshift Experience in data mining, ETL, etc. and using databases in a business environment with large-scale, complex datasets Our inclusive culture empowers Amazonians to deliver the best results for our customers. If you have a disability and need a workplace accommodation or adjustment during the application and hiring process, including support for the interview or onboarding process, please visit https://amazon.jobs/content/en/how-we-hire/accommodations for more information. If the country/region you’re applying in isn’t listed, please contact your Recruiting Partner.

As the global leader in high-speed connectivity, Ciena is committed to a people-first approach. Our teams enjoy a culture focused on prioritizing a flexible work environment that empowers individual growth, well-being, and belonging. We’re a technology company that leads with our humanity—driving our business priorities alongside meaningful social, community, and societal impact. Please note: This is an office-based role located in Chennai, and is suitable for candidates who are open to relocating to or currently residing in Chennai. How You Will Contribute As part of Modem and Photonics LCM and Repair group, the ideal candidate has both hardware and software background and experience with factory production metrics and factory automation. Candidate must be flexible to changing inputs & highly technical problem solver, with interdisciplinary knowledge of software, and test & measurement, and feel at home in a multifaceted, multi-team engineering environment, acting as an interface between RMA, Repair, NPI, LCM, product design, other test engineering teams, and the volume production line! Your daily routine will include leading our repair focused SYS/FA location at Sanmina Chennai, and monitoring repair at 2 other global repair sites. You may also be developing, building, troubleshooting, and supporting test station automation used in Ciena’s production lines for the modems/photonics crafted by Ciena. You will also be part of test systems and new tools which are required for the next generation of products, to grow our testing capabilities, which will be deployed abroad at the sites of our manufacturing partners. Provide SYS/FA eng technical lead/support in the repair space Develop test automation software, test sequences and test instructions Provide test mentorship and Design For Testability analysis at the R&D reviews Support the Repair, NPI & LCM team with test tools during the prototype development Testing alpha and beta prototypes in the lab to validate the test process Support the Contract Manufacturer (CM) for testing of prototypes and production Optimize test methods to increase test efficiency and adaptability Build new tools to scale test capabilities to higher volume, reduce test time Provide interfaces for other groups to use the new tools with different technologies Integrate test station into the CIENA corporate manufacturing system (define process flows, PMAs, ATEs, interface to data base, etc.) Adapt new technologies to improve or replace existing test processes; The Must Haves Excellent written and verbal communication skills (English is MUST) Strong analytical and problem solving skills Team player to optimally collaborate with cross functional teams around the world; Self-motivated, well-organized with a willingness to learn; Assertiveness to drive our contract manufacturer engineers / technicians; Speaking and writing: MUST be proficient English (Spanish/Thai an asset) Ability and willingness to travel abroad occasionally as per business need Strong technical skills with hands on experience in test & debugging of telecom products Experience with Contract Manufacturer environment (Tata, Infosys, Foxcon, Airtel, Reliance, Bharti, Sanmina, Celestica, Flextronics, Jabil, etc) Familiar with the laboratory environment and test equipment Hands on experience in software development (C#) and Python and LUA and knowledge of Matlab Test Systems implementation experience, Security standards and protocols Curiosity to experiment with new technologies, to tackle current problems Experience with Electro-Optics Secure product development and testing Ability to navigate PCB schematic and layout tools Knowledge of the Ciena Optical Modem products desirable Bachelor or Master of Engineering Degree (Security, Computers, Electronics) Minimum of 8+ years of SYS/Repair/FA experience in Electronics/CMs/TestEng Not ready to apply? Join our Talent Community to get relevant job alerts straight to your inbox. At Ciena, we are committed to building and fostering an environment in which our employees feel respected, valued, and heard. Ciena values the diversity of its workforce and respects its employees as individuals. We do not tolerate any form of discrimination. Ciena is an Equal Opportunity Employer, including disability and protected veteran status. If contacted in relation to a job opportunity, please advise Ciena of any accommodation measures you may require. Show more Show less

Embark on a transformative journey as a Risk Model Validation at Barclays, where you'll spearhead the evolution of our digital landscape, driving innovation and excellence. You'll harness cutting-edge technology to revolutionize our digital offerings, ensuring unapparelled customer experiences. As a part of Risk Model Validation, you would be reviewing the stress testing models in the Trading Risk Independent Validation team of the bank. To be a successful Risk Model Validation you should have experience with: Academics / Education - postgraduate in a quantitative discipline, for example mathematics, physics, quantitative finance, or quantitative field. Experience in mathematical skills, including in probability, statistics, differential and integral calculus, linear algebra, stochastic calculus, and numerical methods; Strong Experience on programming skills in languages / packages such as Python, C++, or Matlab. Some Other Highly Valued Skills May Include The ideal candidate will have proven ability to understand several traded risk modelling approaches, including models for VaR, PFE and initial margin, and their strengths and weaknesses. Exposure to the knowledge around the financial products pricing and fundamentals is a plus. Exposure to the stress testing frameworks like IST or CCAR would be an added advantage. You may be assessed on the key critical skills relevant for success in role, such as risk and controls, change and transformation, business acumen strategic thinking and digital and technology, as well as job-specific technical skills. The role is based out of Noida location. Purpose of the role To validate and approve models for specific usages both at inception and on a periodic basis, and of model changes, as well as conducting annual reviews. Accountabilities Validation of models for their intended use and scope, commensurate with the complexity and materiality of the models. Approval or rejection of a model or usage based on assessment of the model’s conceptual soundness, performance under intended use and the clarity of the documentation of the model’s inherent risks, limitations and weaknesses. Assessment of any compensating controls used to mitigate Model risk. Documentation of validation findings and recommendations in clear and concise reports, providing actionable insights for model improvement. Evaluation of the coherence of model interactions and quality of Large Model Framework aggregate results that generate output for regulatory submissions or management decision making and planning. Design of the framework and methodology to measure and, where possible, quantify model risk, including the assessment of framework level uncertainty. Analyst Expectations To perform prescribed activities in a timely manner and to a high standard consistently driving continuous improvement. Requires in-depth technical knowledge and experience in their assigned area of expertise Thorough understanding of the underlying principles and concepts within the area of expertise They lead and supervise a team, guiding and supporting professional development, allocating work requirements and coordinating team resources. If the position has leadership responsibilities, People Leaders are expected to demonstrate a clear set of leadership behaviours to create an environment for colleagues to thrive and deliver to a consistently excellent standard. The four LEAD behaviours are: L – Listen and be authentic, E – Energise and inspire, A – Align across the enterprise, D – Develop others. OR for an individual contributor, they develop technical expertise in work area, acting as an advisor where appropriate. Will have an impact on the work of related teams within the area. Partner with other functions and business areas. Takes responsibility for end results of a team’s operational processing and activities. Escalate breaches of policies / procedure appropriately. Take responsibility for embedding new policies/ procedures adopted due to risk mitigation. Advise and influence decision making within own area of expertise. Take ownership for managing risk and strengthening controls in relation to the work you own or contribute to. Deliver your work and areas of responsibility in line with relevant rules, regulation and codes of conduct. Maintain and continually build an understanding of how own sub-function integrates with function, alongside knowledge of the organisations products, services and processes within the function. Demonstrate understanding of how areas coordinate and contribute to the achievement of the objectives of the organisation sub-function. Make evaluative judgements based on the analysis of factual information, paying attention to detail. Resolve problems by identifying and selecting solutions through the application of acquired technical experience and will be guided by precedents. Guide and persuade team members and communicate complex / sensitive information. Act as contact point for stakeholders outside of the immediate function, while building a network of contacts outside team and external to the organisation. All colleagues will be expected to demonstrate the Barclays Values of Respect, Integrity, Service, Excellence and Stewardship – our moral compass, helping us do what we believe is right. They will also be expected to demonstrate the Barclays Mindset – to Empower, Challenge and Drive – the operating manual for how we behave. Show more Show less

About the job: Key responsibilities: 1. Conduct linear and non-linear FEA simulations using software such as ANSYS, Abaqus, or similar tools 2. Analyze stress, strain, thermal, vibration, fatigue, and other performance characteristics 3. Prepare simulation models based on CAD data and material specifications 4. Interpret FEA results and provide design recommendations and optimizations 5. Validate FEA results with experimental data when applicable 6. Collaborate with cross-functional teams including design, manufacturing, and quality 7. Document and present analysis reports and findings to stakeholders 8. Support design reviews and contribute to product development lifecycle Who can apply: Only those candidates can apply who: have minimum 1 years of experience Salary: ₹ 2,00,000 - 3,00,000 /year Experience: 1 year(s) Deadline: 2025-07-12 23:59:59 Skills required: AutoCAD, MATLAB, SolidWorks, Catia, ANSYS, Autodesk Fusion 360 and HyperMesh Other Requirements: Aerospace Engineering About Company: AKSI AI Aerospace and Agri Technology Ventures Private Limited works in the domain of aerospace and affiliated technology.

Embark on a transformative journey as a Risk Model Validation at Barclays, where you'll spearhead the evolution of our digital landscape, driving innovation and excellence. You'll harness cutting-edge technology to revolutionize our digital offerings, ensuring unapparelled customer experiences. As a part of Risk Model Validation, you would be reviewing the stress testing models in the Trading Risk Independent Validation team of the bank. To be a successful Risk Model Validation you should have experience with: Academics / Education - postgraduate in a quantitative discipline, for example mathematics, physics, quantitative finance, or quantitative field. Experience in mathematical skills, including in probability, statistics, differential and integral calculus, linear algebra, stochastic calculus, and numerical methods; Strong Experience on programming skills in languages / packages such as Python, C++, or Matlab. Some Other Highly Valued Skills May Include The ideal candidate will have proven ability to understand several traded risk modelling approaches, including models for VaR, PFE and initial margin, and their strengths and weaknesses. Exposure to the knowledge around the financial products pricing and fundamentals is a plus. Exposure to the stress testing frameworks like IST or CCAR would be an added advantage. You may be assessed on the key critical skills relevant for success in role, such as risk and controls, change and transformation, business acumen strategic thinking and digital and technology, as well as job-specific technical skills. The role is based out of Noida location. Purpose of the role To validate and approve models for specific usages both at inception and on a periodic basis, and of model changes, as well as conducting annual reviews. Accountabilities Validation of models for their intended use and scope, commensurate with the complexity and materiality of the models. Approval or rejection of a model or usage based on assessment of the model’s conceptual soundness, performance under intended use and the clarity of the documentation of the model’s inherent risks, limitations and weaknesses. Assessment of any compensating controls used to mitigate Model risk. Documentation of validation findings and recommendations in clear and concise reports, providing actionable insights for model improvement. Evaluation of the coherence of model interactions and quality of Large Model Framework aggregate results that generate output for regulatory submissions or management decision making and planning. Design of the framework and methodology to measure and, where possible, quantify model risk, including the assessment of framework level uncertainty. Analyst Expectations To perform prescribed activities in a timely manner and to a high standard consistently driving continuous improvement. Requires in-depth technical knowledge and experience in their assigned area of expertise Thorough understanding of the underlying principles and concepts within the area of expertise They lead and supervise a team, guiding and supporting professional development, allocating work requirements and coordinating team resources. If the position has leadership responsibilities, People Leaders are expected to demonstrate a clear set of leadership behaviours to create an environment for colleagues to thrive and deliver to a consistently excellent standard. The four LEAD behaviours are: L – Listen and be authentic, E – Energise and inspire, A – Align across the enterprise, D – Develop others. OR for an individual contributor, they develop technical expertise in work area, acting as an advisor where appropriate. Will have an impact on the work of related teams within the area. Partner with other functions and business areas. Takes responsibility for end results of a team’s operational processing and activities. Escalate breaches of policies / procedure appropriately. Take responsibility for embedding new policies/ procedures adopted due to risk mitigation. Advise and influence decision making within own area of expertise. Take ownership for managing risk and strengthening controls in relation to the work you own or contribute to. Deliver your work and areas of responsibility in line with relevant rules, regulation and codes of conduct. Maintain and continually build an understanding of how own sub-function integrates with function, alongside knowledge of the organisations products, services and processes within the function. Demonstrate understanding of how areas coordinate and contribute to the achievement of the objectives of the organisation sub-function. Make evaluative judgements based on the analysis of factual information, paying attention to detail. Resolve problems by identifying and selecting solutions through the application of acquired technical experience and will be guided by precedents. Guide and persuade team members and communicate complex / sensitive information. Act as contact point for stakeholders outside of the immediate function, while building a network of contacts outside team and external to the organisation. All colleagues will be expected to demonstrate the Barclays Values of Respect, Integrity, Service, Excellence and Stewardship – our moral compass, helping us do what we believe is right. They will also be expected to demonstrate the Barclays Mindset – to Empower, Challenge and Drive – the operating manual for how we behave. Back to nav Share job X(Opens in new tab or window) Facebook(Opens in new tab or window) LinkedIn(Opens in new tab or window) Show more Show less

SUMMARY Subject Matter Expert (SME) Logistics Support Required Qualifications & Skills Bachelor's degree or any PG in Business Administration, Logistics, Supply Chain Management, or a related field. 5 7 years of relevant experience in logistics support and coordination. Proficiency in using Coupa for logistics management. Strong communication and coordination skills. Experience with RFQs, validating quotes, and coordinating approvals. Ability to manage spot quote requests and consolidate weekly data reports. Job Description This role involves selecting logistics service providers for new lanes by sending RFQs, validating quotes, and coordinating approvals. Additionally, it includes managing spot quote requests by reviewing, consolidating, and reporting weekly data from logistics service providers (LSPs). Key Responsibilities Selecting Logistics Service Providers (LSP) for new logistics lanes (Ocean and Air). Sending RFQs to LSPs, obtaining quotes, and validating them. Sharing quotes with the logistics team (Origin & Destination Lead) and GP for approval. Informing LSPs and stakeholders of approved lanes. Managing spot quote requests by reviewing, consolidating, and submitting weekly reports to stakeholders. Coordinating new lane requests among Organon stakeholders and externally among LSPs. Capturing all spot shipments into the spot shipment tracker and consolidating them into weekly reports.

Industry Type: Space Technology Location: Ahmedabad, India Employment Type: Internship (6-12 months) Company: Orbitt Space About the Job Are you ready to power the next era of satellite propulsion? Join us at Orbitt Space , a deeptech space startup building cutting-edge electric propulsion systems for ultra-low Earth orbit (ULEO) satellites. We’re backed by pi Ventures and IIMA Ventures , and are on a mission to redefine what’s possible in compact and sustainable satellite propulsion. We’re seeking a passionate and hands-on Power Electronics Engineer – Intern to support the development of high-voltage power electronics systems critical to our in-space propulsion platforms. Key Responsibilities Design and development of Electronic Power Conditioners (EPCs) for electric propulsion systems, including schematic capture and layout and hardware testing Analyze system-level hardware architecture and simulate performance using LTspice, MATLAB/Simulink, or equivalent tools Build and test power electronics prototypes for DC-DC converters Design of custom magnetics: transformers, chokes, and inductors Select components based on switching frequency, thermal, and radiation constraints Address safety-critical design considerations including EMI/EMC, fault protection, thermal management in vacuum, and reliability Collaborate with PCB fabricators, assembly vendors, and cross-disciplinary teams (mechanical, embedded, firmware) Participate in technical reviews and continuous improvement efforts Requirements Qualifications: Bachelor’s or Master’s degree (pursuing or completed) in Electrical, Power Electronics, or related field Knowledge of DC-DC converter topologies and power switching techniques Strong foundation in analog/digital electronics and component-level design Familiarity with ECAD tools (Altium, KiCad, etc.) Strong problem-solving and analytical skills Self-driven, able to manage tasks under tight timelines Bonus : Exposure to High voltage and high power systems, space hardware, or vacuum testing Education UG: B.Tech / B.E. in Electrical / Electronics / Instrumentation PG: M.Tech / M.E. in relevant fields (preferred but not mandatory) Benefits Hands-on experience with real-world space propulsion projects Mentorship from senior engineers with ISRO and industry experience Work at the forefront of India's space-tech ecosystem Collaborative and high-growth environment Access to cutting-edge tools and lab facilities Show more Show less

Research Programmer (Python/ MATLAB) Fresher & Experienced About Panacorp Software Solutions Panacorp Software Solutions is a research-driven organization specializing in providing technical assistance for PhD research projects. Our focus is on supporting research scholars with programming, simulations, and computational analysis in various domains, including AI, Machine Learning, and numerical computing. Job Role & Responsibilities Assist in research-based projects related to PhD studies. Perform simulations, numerical computing, and data analysis using Python, MATLAB, and Simulink. Support research scholars in implementing Machine Learning (ML) and Deep Learning (DL) models. Automate processes and optimize research workflows through scripting. Document research methodologies, findings, and technical reports. Work closely with scholars to analyze and interpret computational results. Eligibility Criteria Qualification: BE/B.Tech/MCA Experience: 0 5+ years (Freshers with strong academic knowledge can apply). Strong understanding of research methodologies and computational tools. Preferred Skills Proficiency in Python, MATLAB, and Simulink. Knowledge of data analysis, AI/ML techniques, and numerical simulations. Ability to interpret and validate research outcomes. Strong analytical and problem-solving skills.