532 Cfd Jobs - Page 7

Urgent Hiring || Thermal Engineer || Ghaziabad Profile: Principal Thermal Engineer Location : Sahibabad next to Ghaziabad Experience: 10+ years Salary : Max 20 LPA About the Role: We are seeking a Principal Thermal Engineer with a deep command over thermal calculations, waste heat recovery, material selection, and heat transfer systems. This role demands a highly analytical and innovative expert who can lead advanced thermal projects, drive energy efficiency, and ensure the optimal performance of industrial heat exchange and cooling systems. Key Responsibilities: Thermal System Design & Optimization: Perform advanced thermal calculations to optimize heat exchangers, cooling towers, and energy recovery systems. Develop thermodynamic models (Rankine, Organic Rankine, Brayton, Refrigeration cycles) to enhance system efficiency. Utilize CFD and FEA simulations for heat transfer, pressure drop, and flow distribution analysis. Conduct real-time performance monitoring and diagnostics for industrial thermal systems. Drive continuous improvement initiatives in thermal management, reducing energy losses. Waste Heat Recovery & Thermal Audits: Lead comprehensive thermal audits, evaluating waste heat potential and energy savings opportunities. Develop and implement waste heat recovery systems for industrial processes. Assess and optimize heat-to-power conversion strategies for enhanced energy utilization. Conduct feasibility studies for thermal energy storage and process integration. Heat Exchangers & Cooling Tower Performance: Design and analyze heat exchangers (shell & tube, plate, finned, etc.) for optimal heat transfer efficiency. Enhance cooling tower performance, focusing on heat rejection, drift loss reduction, and water treatment strategies. Oversee component selection, performance evaluation, and failure analysis for industrial cooling systems. Troubleshoot thermal inefficiencies and recommend design modifications. Material Selection & Engineering Compliance: Guide material selection for high-temperature and high-pressure thermal applications. Evaluate thermal conductivity, corrosion resistance, creep resistance, and mechanical properties. - Ensure all designs adhere to TEMA, ASME, API, CTI (Cooling Technology Institute), and industry standards. Leadership & Innovation: Lead multi-disciplinary engineering teams to develop cutting-edge thermal solutions. Collaborate with manufacturing, R&D, and operations teams for process improvement. Provide technical mentorship and training to junior engineers. Stay ahead of emerging technologies in heat transfer, renewable energy, and thermal system efficiency. Required Skills & Qualifications: Bachelor's/Master's/PhD in Mechanical Engineering, Thermal Engineering, or a related field. 10+ years of industry experience, specializing in thermal calculations, heat exchanger design, and waste heat recovery. Expertise in heat transfer, mass transfer, thermodynamics, and fluid mechanics. Hands-on experience with thermal simulation tools (ANSYS Fluent, Aspen Plus, MATLAB, COMSOL, EES). Strong background in thermal audits, cooling tower performance enhancement, and process heat recovery. Experience in industrial energy efficiency, power plant optimization, and heat recovery applications. In-depth knowledge of high-temperature alloys, corrosion-resistant materials, and structural analysis. Strong problem-solving skills with a research-driven and analytical mindset. Ability to lead projects, manage teams, and drive technical innovation. Preferred Qualifications: Experience in power plants, ORC (Organic Rankine Cycle) systems, and industrial energy recovery projects. Expertise in advanced material engineering for high-performance thermal systems. Publications or patents in heat transfer, waste heat recovery, or energy efficiency technologies. Compensation & Benefits: Competitive salary based on expertise and industry standards. Performance-based incentives and growth opportunities. Health and insurance benefits. Opportunities for leadership and R&D involvement. Show more Show less

Role & responsibilities Duties & Responsibilities 1. Understand and agree deliverables of FEA projects from the CAE Lead Engineer. 2. Will be responsible for managing the FEA projects, carried out the FEA analysis in Ansys workbench based on pre-defined load cases. 3. Will be responsible to make detail FEA report of his Analysis interpret the results at initial level to find out the issue in meshing, Load & BC etc. Preferred candidate profile 1. Knowledge of sheet metal and other component manufacturing process to support other functions and suppliers. Required Skillset 1. Good experience of FEA, Meshing, Results interpretation with good structural understanding. 2. Strong fundamental knowledge of basic of mechanics of material and strength of material along with Structural design 3. Through understanding of kinematics calculations of Construction equipment machines 4. Good communication skills both verbal and written

The Opportunity Hitachi Energy is a world leader that is advancing a sustainable energy future for all. We are advancing the world’s energy system to be more sustainable, flexible, and secure, and we collaborate with customers and partners to enable a sustainable energy future – for today’s generations and those to come. The Hitachi Energy Indian Operations Center (INOPC) is a competence center with around 3000+ skilled engineers who focus on tendering, engineering, planning, procurement, project Management, functional system testing, installation supervision, documentation and commissioning. However, over the last decade, it has evolved to become the largest Operations hub. The India Operations Centre team at Chennai, Bangalore and Gurugram supports Hitachi Energy’s units in more than 40 countries across a wide portfolio of all the four business units in Hitachi Energy To date, the team has executed engineering and commissioning for projects in more than 80 countries. The HVAC Engineer shall Analyse customer specification to ensure Hitachi Energy solution meets the customer requirements. Good knowledge of the HVAC System Design How You’ll Make An Impact Analyze HVAC systems and equipment when necessary to find inefficiencies or malfunctions and create solutions to optimize performance and increase the efficiency of operation. Provides technical evaluation of supplier proposals and aspects as fit for purpose supplied equipment or services. Review drawings and documents to fulfil the local regulations & technically coordinate with Electrical and Mechanical department. Should be able to technically coordinate with Civil & MEP. Coordinate with Project/Tender Team efficiently & identify the risk and opportunities effectively You will be able to review the system, drawing and documents to fulfil the requirements and local regulations along with HSE and quality aspects. You will be able to co-ordinate with Building management system and other Interfaces. Technical coordination with Electrical and Mechanical department. Living Hitachi Energy’s core values of safety and integrity, which means taking responsibility for your own actions while caring for your colleagues and the business. Your Background Have Mechanical Engineering with a minimum work experience of 5+ years in HVAC Designs. You should have knowledge in CFD Analysis with market available software Revit Modelling knowledge in Civil/Architectural aspects. Excellent written and verbal communication skills . Attention to detail and a commitment to delivering high-quality digital solutions. Hitachi Energy is a global technology leader that is advancing a sustainable energy future for all. We serve customers in the utility, industry and infrastructure sectors with innovative solutions and services across the value chain. Together with customers and partners, we pioneer technologies and enable the digital transformation required to accelerate the energy transition towards a carbon-neutral future. We employ around 45,000 people in 90 countries who each day work with purpose and use their different backgrounds to challenge the status quo. We welcome you to apply today and be part of a global team that appreciates a simple truth: Diversity + Collaboration = Great Innovation. Show more Show less

The Opportunity Hitachi Energy is currently looking for an R&D Thermal Simulation Engineer - Power Transformer for the Transformers Business to join INOPC – PGTR, Chennai, India. This team seeks a skilled and motivated individual. Transformers BU team leverages innovative and diverse technology to transform energy, delivering social, environmental, and economic value and enabling a sustainable energy future for current and future generations. The business’s comprehensive portfolio includes power transformers, traction transformers, insulation and components, digital sensors, and transformer services. The Company’s transformers have been deployed across power generation, transmission, and distribution to metals and mining, oil and gas, commercial and infrastructure projects, and mobility. As the grid becomes more complex, the transformers play an increasingly vital role in improving power quality and network management. Contribute with own ideas to identify, propose and implement innovative technology development and solutions. Solve industrial problems independently. How You’ll Make An Impact Demonstrate your technical expertise by undertaking a variety of engineering assignments within R&D projects. You will showcase your independent problem-solving skills and contribute to ongoing scientific discussions in your area. Provide support on transformers business regarding thermal developments, from software, simulation and experimental points of view Compile and assimilate data from various sources, conduct relatively routine operations and tests. Propose and lead innovative ideas for future product developments in transformers cooling. Conducting Thermal Simulation using CFD and FEA to model heat transfer, airflow, and temperature distribution in power Transformers. Develop mathematical models and CFD simulation methodologies for accurate thermal performance prediction. Collaborate with engineers to develop and optimize new and existing products. Conduct feasibility studies, develop technical concepts, design new products, and simulate their performance. Collaborating with other simulation teams to deliver comprehensive multi-physic finite element methodologies. Formulate clear conclusions and practical recommendations for the business. Transfer your knowledge and findings by elaborating reports, specifications and/or participating in educational programs. Contribute to product and technology development projects, ensuring timely and budget-compliant delivery. Develop, manage and expand relationships with stakeholders, internal functions, Corporate Research Centers and external relevant parties (e.g. customers, universities). Providing proposals for possible partnerships. Serve as a valuable R&D project member and, as a potential project or sub-project leader, ensure alignment with goals in time, cost, and quality. Coordinate activities with a strong grasp of R&D processes and tools. Actively participate in engineering networks to enrich your expertise and visibility within your targeted area. Recognize the importance of intellectual property to our business, engage in IP discussions, prepare project clearance reports, and identify risks in R&D projects. Responsible to ensure compliance with applicable external and internal regulations, procedures, and guidelines. Living Hitachi Energy’s core values of safety and integrity, which means taking responsibility for your own actions while caring for your colleagues and the business. Your Background B. Tech or BE or ME or M.Tech or MS or PhD Engineer in Mechanical or Thermal or fluid dynamics. 4 to 10 years of Proven experience on Thermal and fluid simulations (CFD 2D and 3D, preferably Fluent). Knowledge of object-oriented software (preferably VB.NET). Circuit simulation program (preferably SPICE). Deep understanding of thermodynamics, heat transfer and fluid mechanics. Knowledge of CAD modelling software (CREO). Excellent abilities in teamwork in international teams with excellent interpersonal skills. Knowledge in ACT and APDL programming in Ansys shall be well valued. Solid understanding of the standard body of knowledge in the relevant technical field and solid technical proficiency. Proved contributions to transformer industry by technical papers and/or patents. Willing to work in remote and diverse environments. Willingness to travel to factories when needed. Most important for this role is your personality and your willingness to learn and explore new areas. Excellent teamwork and collaboration skills are crucial to succeed. Proficiency in both spoken & written English language is required. Hitachi Energy is a global technology leader that is advancing a sustainable energy future for all. We serve customers in the utility, industry and infrastructure sectors with innovative solutions and services across the value chain. Together with customers and partners, we pioneer technologies and enable the digital transformation required to accelerate the energy transition towards a carbon-neutral future. We employ around 45,000 people in 90 countries who each day work with purpose and use their different backgrounds to challenge the status quo. We welcome you to apply today and be part of a global team that appreciates a simple truth: Diversity + Collaboration = Great Innovation. Show more Show less

software competency ANSYS Fluent,3D_STAR-CCM+ HYPERMESH,CFX,ICEMCFD CFD engineer will have an opportunity to work on modeling& analysis of heat exchangers &new reactors& processes in different products groups Education from IIT & NIT GATE qualified Required Candidate profile the latest advancements in aerospace aerodynamics &CFD technologies,contributing innovative approaches to the team.mechanical systems such as pumps, compressors,turbines,fans,engines,etc

The technical engineer should deliver Powertrain CFD projects withemphasis on Engine Cooling system (Hydraulics and deaeration simulation) as anindividual contributor/with support of team Leverage team competency by bringing new technology/concept to deliver ProgramGateways Provide technical guidance on Powertrain Integration CFD projects to newengineers. Take initiative and responsibility for new challenging projects and collaborateteam to deliver the task Ensure lessons learnt are captured, translated & applied to futureprograms, participate in Powertrain Tech club meetings and support developingaction plans and solutions for critical issues related to PTI CFD system Should be able to find out the root cause for convergence issues duringanalysis and mentor the team to complete complex analysis Interfacing with the customer on the project status and analysis reviews onclosure of TGW/issues within expectation DOMAIN KNOWLEDGE:\u200b Good Understanding of CFD 3D Flow, Thermal, Porous Modelling andmulti-phase modellin Knowledge in Engine cooling system. Perform CAD cleanup, Surface Meshing using ANSA, and Star-CCM+. Perform CFD simulations using Star-CCM+ and Simerics with best practices foraccurate computational efficiency. Nice to have Simerics tool exposure, nice to have 1D Flow Master toolsexposure. Exposure to Programming language like python/ JAVA etc would be a plus

1. Good Understanding of CFD 3D Flow, Thermal, PorousModeling and DPM modeling. 2. Perform CAD cleanup,Surface Meshing and Volume Meshing using ANSA, Fluent Meshing (T-Grid) andStar-CCM+. 3. Perform CFDsimulations using Star-CCM+ and Fluent with best practices for accuratecomputational efficiency. 4. Provide accurate anddetailed reports of CFD results. 5. Find root cause andprovide effective design solutions to optimize product functionality. 6. Able to interact withcross-functional teams. 7. Good written andverbal communication skills. 8. Develop processimprovements and standard work practices for operational efficiency. 9. Preferable withknowledge in converge-Studio and Urea deposit modeling. SKILL SET: Star CCM+ and 3D-CAD / ANSA / Fluent , Converge-Studio, EnSight , Hypermesh DOMAIN KNOWLEDGE: Preferable with knowledge in Exhaust Aftertreatment components and Air Induction system.

Good experience in Automotive transmission and driveline (traditional andelectric) systems. Develop CFD methods and use of tools, to support new designs relevant totransmission and driveline, as well as resolve issues relating to manufacturingand quality. Should be able to identify root cause of undesired outcomes from simulationsand finding the reasonable solution. Experience with two-phase flow modeling (VOF) and multi-cell region problems(moving/sliding mesh). Conduct model correlations for subsystem functionality verification. Thorough understanding of physics related to fluid dynamics and heat transfer. Hands-on experience with Star-CCM+ and ANSA. \u200b Preferred candidate will be an individual contributor, working directly withglobal design and product development teams on futuristic hybrid and batteryelectric vehicles. Domain Knowledge: CFDAnalysis Knowledgeof Transmission and Driveline system Goodunderstanding of Fluid Dynamics and Heat Transfer Additionalskills: Skilled in Preonlab (Smooth Particle Hydrodynamics) will be considered as anadded advantage. Experience with GT-suite/AMESim is a plus. Knowledge of transmission hydraulic/lube system. Knowledge on Teamcenter will be considered as an advantage.

1. EXPERT ANSA CFD modeling experience IS MANDATORY. 2.Experience in Full Vehicle Thermal System Model build. 3.Knowledge of various rubber and plastic parts and their modeling strategy forthermally sensitive regions. 4.Knowledge of Part Structure Management in ANSA. 5.Full Vehicle Intergration with all model build checks. 6.Knowledge of all subsystems and their functioning. 7.Very good communication skills and interpersonal skills are MANDATORY 8.Effectively communicate the progress, issues to the team daily. 9.Good Attitude with very good team spirit is MUST. Domain knowledge: Should Possess good CFD knowledge. \u200b Ableto understand the project requirements .

Needfreshers from reputed colleges with good exposure in Thermal / Fluid dynamics/CFD. VeryGood communication and interpersonal skills are MANDATORY. Candidateswithout nice communication skills WILL NOT be selected. StrongFundamental knowledge in Fluid dynamics and Heat Transfer. Needa clear evaluation report of the candidate before submitting the profiles. Candidateswithout evaluation of communication WILL NOT be selected. Selectedcandidates will be trained in ANSA basics.

Job Description Summary Role Summary/Purpose TSD tools and method is a critical domain for Aerospace. TSD tools framework is equipped with state-of-the-art numerical techniques and methods that provides competitive edge for performing thermal analysis. NGT/FS is one such platform which TSD tools team developed it for GE businesses. NGT/FS platform is an integrated framework that has a customized thermal solver with customized GUI (Graphical User Interface) used by GE engineers, for conducting mixed fidelity simulations that includes integrated Flow, Heat transfer and Mechanical analyses. We are seeking a highly skilled and motivated individual with a strong numerical background to join our team for the NGT/FS platform. As a Lead Engineer TSD Tools and Method engineer will be responsible for enhancing thermal capabilities in NGT/FS Platform as per business need, Work with CTH to create & execute strategic items on state-of-the-art tools/methods which provides competitive edge for completing thermal analysis. You will play a pivotal role in developing, maintaining, and enhancing our thermal tools and numerical modeling workflow. This role demands NGT/FS code base deployment, testing and detailed validation before newer NGT/FS releases to 100+ users. The tool owner must actively interact with all thermal engineers to understand the ask and must follow LEAN approach to eliminate waste as per business need. In addition to the above, this role demands strong collaboration with thermal users to empowering them in resolving issues/challenge faced while using thermal tools. Job Description Company Overview Working at GE Aerospace means you are bringing your unique perspective, innovative spirit, drive, and curiosity to a collaborative and diverse team working to advance aerospace for future generations. If you have ideas, we will listen. Join us and see your ideas take flight! Site Overview Established in 2000, the John F. Welch Technology Center (JFWTC) in Bengaluru is our multidisciplinary research and engineering center. Engineers and scientists at JFWTC have contributed to hundreds of aviation patents, pioneering breakthroughs in engine technologies, advanced materials, and additive manufacturing. Essential Responsibilities Gathering thermal enhancement requests from thermal users and translating those in to first principles-based equations and solving them through in-house solvers. Implementing thermal enhancement in NGT/FS solver while ensuing desired connectivity between interfacing tools/methods such as Mechanical solver and Flow Solver etc. Stay up to date on the latest advancements in ANSYS core developments relative to thermal simulation technologies and identify opportunities to further optimize our solution processes. Creating user interface (UI) specifications in accordance with enhancement request. Empowering thermal users while addressing: 1. Bug/Issues reported by users,2. Issues faced while using thermal tools, 3. Automation requests 4. New technology integration requests. Meeting delivery schedule adhering to processes followed within GE. Following details SDLC process for NGT/FS release (Code update, Integration, Compilation, Testing, Validation, TG review and Release) Working on strategic POCs targeted as enhancing tools state considering latest industry trend relative to thermal tools. Actively contributing to Design Board or Tech Community while representing TSD tools team in those forums Required Qualifications: PhD/Post Graduate degree from an accredited university with focus in ingestion, CFD and heat transfer Minimum of five years of experience with industry in ingestion, CFD and heat transfer Good understanding of fluid dynamics, thermodynamics, CFD, heat transfer and particle transport modeling & associated physics Skilled in programming languages like Fortran, C/C++, Python and ability to write/debug basic code functionalities Demonstrated analytical and problem-solving skills. Desired Characteristics CFD and thermal code development background Strong familiarity with ANSYS CFX or FLUENT with experience in creating user defined functions Familiarity with meshing tools like ICEMCFD, FLUENT MESHER. Familiarity with FENSAP ICE and ANSYS Fluent for particle trajectory and icing analysis Familiarity with ANSYS Workbench for Multiphysics Simulation (Mechanical, Thermal and Structural) Flexible to adopt work as per business needs and priorities Ability to collaborate and co-ordinate tasks involving global team members Strong cross-functional teaming, communication, and presentation skills. Humble: respectful, receptive, agile, eager to learn Transparent: shares critical information, speaks with candor, contributes constructively Focused: quick learner, strategically prioritizes work, committed Leadership ability: strong communicator, decision-maker, collaborative Problem solver: analytical-minded, challenges existing processes, critical thinker. About Us: GE is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, national or ethnic origin, sex, sexual orientation, gender identity or expression, age, disability, protected veteran status or other characteristics protected by law. Closing comment: At GE Aerospace, we have a relentless dedication to the future of safe and more sustainable flight and believe in our talented people to make it happen. Here, you will have the opportunity to work on really cool things with really smart and collaborative people. Together, we will mobilize a new era of growth in aerospace and defense. Where others stop, we accelerate. #LI-DM3 Additional Information Relocation Assistance Provided: Yes

Job Summary The candidate will have primary responsibilities of managing Multifond, pControl and associated Fund Accounting applications Support, identification of different issues and providing accurate and timely result to the Global Fund Accounting Users. Team member is responsible for interacting with Global MF Users, Business and Operations teams to provide a high quality of product to the internal and external clients and meet the agreed and expected service standards. The support member is responsible to coordinate with Operations, technology and third-party vendors provide a high quality issue resolution and meet the agreed and expected service standards. The candidate may also be responsible for contributing to the delivery of local, global and strategic Fund Accounting projects for Citi and external clients. Solid understanding of Fund Accounting domain is essential. Candidate must be open for 24x7-work environment. Primary Responsibilities Analyze root-cause of issues reported on various applications and provide solution to operation team in a timely manner. Focus on production issue resolution, general support and maintenance for the Funds Administration business. Responsible for providing L1 support for Fund accounting applications in a 24/7 environment. Static set up and maintenance. manage MF application change and upgrade test as and when required. Provide support to the Funds Administration business and liaise with the application vendors and technology on their behalf. To work in partnership with the business to ensure timely issue resolution. Meeting SLA/OLA/KPI. Test vendor/application solutions. Track the schedule, issue resolution progress, and be accountable for the associated tasks. Ensure accurate and timely execution of the assigned tasks. Work closely with other internal teams on upcoming projects, assignments and initiatives. Qualification, Experience, Skills And Competencies Preferably MBA (Finance) / CA / ICWA 2-4 years of experience in fund accounting domain. Sound knowledge and understanding of accounting principles and NAV calculation. Knowledge of all Security types like Equities, Bonds, Repo, CFD, Futures, Options, Bank Debts, SWAPS, Forwards, Spot, etc, trade life cycle, various Corporate Actions and its impact on portfolio will be an advantage. Basic SQL knowledge. Excellent written and spoken communication skills. Ability to work independently, as well as in a team environment, prioritizes multiple tasks and meets strict deadlines. Must be prepared to work in a shift in line with regions supported including India night shifts. Innovative approach to work and continuously identifies and implement process improvements. Experience in Fund Accounting application like Multifonds / pControl /Investone will be an added advantage. Good attention to detail and high levels of accuracy Strong analytical and problem-solving skills. ------------------------------------------------------ Job Family Group: Operations - Transaction Services ------------------------------------------------------ Job Family: Fund Accounting ------------------------------------------------------ Time Type: Full time ------------------------------------------------------ Citi is an equal opportunity employer, and qualified candidates will receive consideration without regard to their race, color, religion, sex, sexual orientation, gender identity, national origin, disability, status as a protected veteran, or any other characteristic protected by law. If you are a person with a disability and need a reasonable accommodation to use our search tools and/or apply for a career opportunity review Accessibility at Citi. View Citi’s EEO Policy Statement and the Know Your Rights poster. Show more Show less

Position: Thermal Product Design Engineer 📍 Location: Bengaluru (On-site) 🕓 Type: Full-time 💼 Experience: 5+ years preferred About Us At Voltanova, we’re on a mission to decarbonize industry with the world’s lowest-cost thermal battery system. Our tech delivers high-temperature heat up to 2000°C, powered by renewable energy, with unmatched efficiency and lifespan. We’re a fast-growing, science-led startup backed by leading institutions and supported by industry pioneers. Role Overview We are seeking a Thermal Product Design Engineer who will lead the design and development of our high-temperature thermal battery systems. You’ll work on core components from concept to prototype to deployment, focusing on thermal behavior, mechanical integrity, manufacturability, and safety. Key Responsibilities Design high-temperature thermal battery components and systems (≥1000°C operating range) Perform thermal, structural, and fluid-flow simulations (e.g., using ANSYS, COMSOL, or similar tools) Collaborate with materials engineers, process engineers, and manufacturing partners Translate product requirements into detailed CAD models and technical drawings Develop and validate thermal prototypes; support pilot deployments at customer sites Contribute to IP development, testing protocols, and reliability assessments Ideal Background B.E./M.E. in Mechanical, Thermal, or Energy Engineering (or related field) 5+ years in product design involving high-temperature systems, thermal insulation, or heat transfer devices Proficiency in CAD (SolidWorks etc.) and FEA/CFD tools Experience with thermal storage, furnaces, kilns, or industrial heat systems a strong plus Understanding of DFM principles and working with vendors/manufacturers Passion for climate tech and working in a high-growth startup environment What We Offer Be part of a mission-driven team building breakthrough climate tech Opportunity to design and deploy real-world industrial solutions Fast-paced, intellectually driven environment with ownership from Day 1 Competitive salary, equity options, and career growth To Apply Send your resume, portfolio and a short note on why this excites you to [careers@voltanova.com]. Show more Show less

Location: Remote / Hybrid (Preferred: Uttar Pradesh, India) Type: Co-Founder | Equity + Future Salary Company Stage: Early-stage, bootstrapped, pre-funded (funding in progress) About Us We are building a pioneering District Cooling-as-a-Service (DCS) company focused on delivering clean, affordable, and efficient cooling for commercial buildings, malls, and urban clusters. Our first 500 TR pilot plant is being developed in Uttar Pradesh, with chilled water supplied via underground pipelines, replacing outdated, energy-hungry ACs. In parallel, we are also working on a new air-conditioning product, a disruptive, next-gen cooling solution that merges energy efficiency with advanced thermal engineering for commercial users. What We’re Looking For We’re seeking a Co-Founder with deep expertise in HVAC product design to help us build a next-generation air conditioning system for commercial users. While we are developing a District Cooling System (DCS) in parallel, this role will primarily focus on designing an innovative cooling product from scratch, optimized for energy efficiency, performance, and manufacturability. You’ll lead the end-to-end HVAC design of this new product, including refrigerant system design, indoor/outdoor unit configuration, airflow, heat exchangers, casing, sensors, and controls. This is a chance to build an entirely new class of AC technology that’s smarter, more efficient, and better suited for the Indian market. Key Responsibilities Lead the design and prototyping of a new air conditioning product tailored for commercial users (restaurants, retail, hospitals, offices) Design key components such as cooling coils, expansion valves, casing, Condenser coil, fans, Evaporators coils , etc. Select optimal refrigerants and model refrigeration and heat transfer performance Conduct simulations for airflow, pressure drops, and temperature control Create 3D models and work closely with fabrication partners for prototype development Ensure modularity, serviceability, and cost-effective manufacturing of the system Align product design with real-world building constraints and energy regulations Prepare technical documents, test protocols, BOMs, and performance reports Ideal Background Bachelor’s or Master’s degree in Mechanical, Refrigeration, Thermal, or HVAC Engineering 3-5+ years of core experience in HVAC product design , especially in commercial or industrial AC systems Strong grasp of heat exchanger design, refrigerant cycle optimization, fan and motor selection, thermal and CFD simulation Experience with tools like SolidWorks, AutoCAD, Ansys, or other HVAC modeling platforms Experience working with component manufacturers , vendors, or in R&D teams of HVAC companies Practical knowledge of thermodynamics, psychrometrics, HVAC testing protocols , and system prototyping Bonus: Exposure to green HVAC technologies, energy-efficient designs, or patent/IP development What’s in it for You Become a core team member and co-founder from the ground up Substantial equity ownership (to be discussed based on fit and commitment) Salary and compensation post-funding (currently bootstrapped) A chance to co-build the future of clean cooling in India Work alongside a visionary founder, early customers, and industry partners Full creative and technical ownership of system design Let’s Build the Future of Cooling If you're excited about reshaping how cities cool their buildings, working with purpose, and solving complex engineering challenges with real-world impact, we’d love to meet you. Show more Show less

Role & responsibilities FEA with Analysis Experience - 1 to 2 Years Ansys CFD Interested candidates can share their resume to mahesh.b@harita.co.in Walkin Venue: Venue 1: BHIVE Workspace (Harita Techserv Pvt Ltd) No.112, AKR Tech Park, B Block, 7th Mile Hosur Road, Krishna Reddy Industrial Area, Bengaluru, Karnataka 560068 Venue 2: Harita Techserv Pvt Ltd 9th Floor, No. 117, Arihant E Park, 1, Lattice Brg Rd, Baktavatsalm Nagar, Adyar, Chennai, Tamil Nadu 600020 Landmark: Next to Greater Chennai Corporation

you’ll be our: CFD & Thermals Simulation Engineer you’ll be based at: IBC Knowledge Park, Bengaluru you’ll be aligned with: Team Lead - CFD & Thermal Simulation you’ll be a member of: Simulation CoC What you’ll do at Ather: Ather Energy has proved itself to be the hallmark and the synonym for Smart,Connected and Intelligent Electric Vehicles in India. Today we are on a journey of exponential growth and marking our presence across the length and breadth of Indian roads. Continuing this journey further means massive ramping up of production and developing many more top-notch products to redefine and upgrade Customers’ Experience in India. At Ather, we believe not just in creating products but in delivering a complete product experience to our customers. This is only possible by exploring non-conventional platforms and pushing the boundaries of engineering design. One such limiting factor is heat and hence thermal management plays a key role in ensuring the designs perform to their required specification and also remain safe during the operation. CFD and Thermal Simulations help play a very critical role in this process to ensure the design is optimized and potential failure modes are identified early in the product development cycle. We are looking for a CFD & Thermal Simulation Engineer who thinks from the first principles and can evaluate the thermal performance of various subsystems and provide insights to improve the same. As our CFD & Thermal Simulation Engineer, you’ll: Plan, set up and execute CFD simulations to support various programs for systems like battery pack, motor and motor drive, chargers and other electronic components. Interpret CFD/Thermal results to provide relevant insights on the flow and thermal phenomena under consideration. Provide technical support and contribute to the solution of fluid-thermal issues on the product. Develop simulation capabilities & correlation of simulation results with test data for 2-Wheeler EV systems. Develop scripts for automation and work towards improving simulation methodology to reduce time and increased accuracy. Prepare standard documents for CFD and Thermal simulation procedures and own reports for all simulation activity. Here’s what we are looking for: Good understanding in the theoretical and practical aspects of fluid flow and heat transfer. Strong understanding and experience in working with commercial CFD codes, preferably Star-CCM+ or Ansys Fluent. Demonstrated industrial or academic experience in addressing flow and thermal challenges on an automotive or electronics platform. Knowledge of CAE Process Automation through Python, Java or any other language will be an added advantage. A fair understanding of the various systems and subsystems in EV’s will be preferred. You bring to Ather: B.E/M.Tech/M.S. in Mechanical Engineering or any other relevant stream. Computational Fluid Dynamics and Thermal Simulation expertise with minimum 3-5 years of experience in an automotive/aerospace company. Show more Show less

Principal Naval Architect- Job Description FloatSys India Pvt Ltd a sister concern of FloatSys Global Inc is a provider of value-added services to the maritime Industry worldwide. Currently we are in search of a Naval Architect to strengthen our office in Kochi, India. Roles and responsibilities for the position, inter alia include the following: Ability to lead a team of multi-disciplinary engineering team in a marine or offshore project. Develop conceptual and detailed ship design, including hull forms, stability analysis / structural layouts, resistance & propulsion, accommodation design LSA & FFA design etc. Performance of various naval architectural calculations, particularly performance of scantling calculations as well as review of structural drawings for the vessels. Review of plans for verification of compliance with various national/international regulations. Conduct feasibility studies and innovation research to improve vessel performance and sustainability. Work closely with the marketing teams to present design concepts to clients and ship owners. Assist in bid proposals for new shipbuilding or retrofitting projects. Interact with clients to understand their requirements and propose customized ship design solutions. Participate in maritime conferences to represent the company and promote its capabilities. Supporting marketing the design products of FloatSys and business development or promotion of the company. Any other roles or responsibilities assigned to you from time to time by the management. Person recruited will be on probation for the initial 6 months period. Required Qualifications  Degree in Naval Architecture. 10-15 years of experience in Naval Architecture and Ship design. Experience in business development experience is an added advantage. Good knowledge in AutoCAD, Rhinoceros 3D, Orca 3D Good knowledge in Auto Hydro or any other ship stability software. Able to analyse and interpret technical information and drawings. Relevant shipyard/design office work experience is desirable. Keen on thinking creatively. Strong interpersonal skills. Able to work effectively with a team of engineers. Meticulous attention to detail. Exceptional written and verbal communication skills. Excellent spatial awareness. Working knowledge in FEA, CFD software and Ship Constructor / CADMATIC/ AVEVA 3D will be considered an added advantage. A higher order flavour in marketing and communication with respect to clients and vendors is an added advantage. Committed to completing projects within deadlines, demonstrating flexibility to work beyond regular hours when necessary to ensure high-quality results. Show more Show less

Job Information Date Opened 06/18/2025 Industry IT Services Job Type Full time Work Experience 3-5 years City Pune State/Province Maharashtra Country India Zip/Postal Code 411057 About Us CCTech 's mission is to transform human life by the democratization of technology. We are a well established digital transformation company building the applications in the areas of CAD, CFD, Artificial Intelligence, Machine Learning, 3D Webapps, Augmented Reality, Digital Twin, and other enterprise applications. We have two business divisions: product and consulting. simulationHub is our flagship product and the manifestation of our vision. Currently, thousands of users use our CFD app in their upfront design process. Our consulting division, with its partners such as Autodesk Forge, AWS and Azure, is helping the world's leading engineering organizations, many of which are Fortune 500 list of companies, in achieving digital supremacy. Job Description About the Role: We are looking for a passionate and results-driven Frontend Developer with 3+ years of experience in JavaScript, TypeScript, and Angular (preferably Angular 10+). The ideal candidate should have a strong understanding of modern web development principles and best practices. You will be responsible for developing scalable and high-performance web applications, collaborating with cross-functional teams, and delivering excellent user experiences. Key Responsibilities: Develop responsive and dynamic single-page web applications using Angular. Write clean, maintainable, and reusable code using JavaScript/TypeScript. Collaborate with designers, backend developers, and QA engineers to deliver high-quality products. Translate UI/UX designs and wireframes into code. Integrate RESTful APIs and work with backend teams to ensure seamless data exchange. Optimize application performance and ensure cross-browser compatibility. Participate in code reviews and contribute to continuous improvement of development processes. Debug, test, and fix issues and bugs across browsers and devices. Stay up-to-date with the latest frontend trends, techniques, and technologies. Requirements 3+ years of experience in frontend development using JavaScript and TypeScript. Strong hands-on experience with Angular (preferably Angular 10 or later). Proficiency in HTML5, CSS3, and responsive design principles. Good understanding of component-based architecture and state management in Angular. Experience working with RESTful APIs and asynchronous data handling (RxJS, Observables). Familiarity with version control systems like Git. Exposure to Agile/Scrum methodologies. Experience with CI/CD pipelines or DevOps tools is a plus. Bachelor’s degree in Computer Science, Engineering, or a related field (or equivalent experience). Soft Skills: Strong problem-solving skills and attention to detail. Excellent communication and collaboration abilities. Ability to work independently as well as in a team environment. Willingness to learn and adapt to new technologies. Benefits Opportunity to work on challenging, real-world problems. Collaborative and innovative work environment. Exposure to modern tools, technologies, and practices. Career growth and skill development opportunities.

Vestas has a long history of investing in Siting (Wind Resource and Site suitability assessment) research and development. Vestas has been an established name in applying high-performance computing, CFD and mesoscale modelling in the wind industry for almost a decade. Global Siting uses this best-in-class knowledge to offer our customers the most optimized site-specific solutions. Siting Specialist Support team directly supports the siting and sales team with customized site specific solutions to be more competitive in the ever growing wind turbine market. You will be a part of a highly skilled team which continuously ensures that Vestas provides best in class site suitability solutions, working across different departments. Frontend Engineering & Technology > Global Siting Solutions > Functional Excellemce & Service Siting Responsibilities Thorough understanding of climatic parameters affecting performance of wind turbines Perform wind turbine load calculations, controller customizations and and climate dependent power curve simulations to check the site suitability of wind turbines Proficient at planning and stakeholder management Working as a Technical Lead and Subject Matter Expert on providing the Site Suitability Solutions to siting team Perform component structural & reliability assessments on major components of wind turbines to confirm their structural integrity Support sales to provide variety of documentations related to loads and performance of wind turbines Come up with ideas for process improvements and automations to improve the lead time and the quality of tasks within the team Qualification Bachelor's/Master's degree in mechanical, Aerodynamics, Civil or other relevant engineering discipline 7+ years of Working experience with 3+ years in Wind Turbine Load Calculations. Preferably related to site suitability assessments of wind turbines Well versed with basics of wind turbine performance and relavent climatic parameters Competencies A team player and good in oral and written communication skills in English Showcasing self leadership Profecient at planning and stakeholder management Open Minded, Innovative, and self-learning attitude Should be able to work with global organization and multiple stakeholders Programming knowledge in Matlab, python etc. What We Offer We offer an exciting job with great opportunities for professional and personal development in an inspiring environment at the world's best wind OEM. We value initiative, responsibility and the right balance between creativity and quality in all solutions. You will become part of a highly professional environment with a solid technical commitment. The exciting candidate will have the opportunity for both professional and personal development in a rapidly expanding organization. Additional Information Your primary workplace will be Chennai. Please note: We do amend or withdraw our jobs and reserve the right to the right to do so at any time, including prior to the advertised closing date. Please be advised to apply on or before 20th Jun 2025. BEWARE – RECRUITMENT FRAUD It has come to our attention that there are a number of fraudulent emails from people pretending to work for Vestas. Read more via this link, https://www.vestas.com/en/careers/our-recruitment-process DEIB Statement At Vestas, we recognise the value of diversity, equity, and inclusion in driving innovation and success. We strongly encourage individuals from all backgrounds to apply, particularly those who may hesitate due to their identity or feel they do not meet every criterion. As our CEO states, "Expertise and talent come in many forms, and a diverse workforce enhances our ability to think differently and solve the complex challenges of our industry". Your unique perspective is what will help us powering the solution for a sustainable, green energy future. About Vestas Vestas is the energy industry’s global partner on sustainable energy solutions. We are specialised in designing, manufacturing, installing, and servicing wind turbines, both onshore and offshore. Across the globe, we have installed more wind power than anyone else. We consider ourselves pioneers within the industry, as we continuously aim to design new solutions and technologies to create a more sustainable future for all of us. With more than 185 GW of wind power installed worldwide and 40+ years of experience in wind energy, we have an unmatched track record demonstrating our expertise within the field. With 30,000 employees globally, we are a diverse team united by a common goal: to power the solution – today, tomorrow, and far into the future. Vestas promotes a diverse workforce which embraces all social identities and is free of any discrimination. We commit to create and sustain an environment that acknowledges and harvests different experiences, skills, and perspectives. We also aim to give everyone equal access to opportunity. To learn more about our company and life at Vestas, we invite you to visit our website at www.vestas.com and follow us on our social media channels. We also encourage you to join our Talent Universe to receive notifications on new and relevant postings. Show more Show less

Design & Development of valves . know Valve standards ASME, API, MSS-SP, ISA 3D models and 2D drawings using Solid Works software. Solid work Skill is a must. using FEA (Finite Element Analysis) & CFD (Computational Fluid Dynamics)

Date 7 Jun 2025 Location: Bangalore, KA, IN Company Alstom At Alstom, we understand transport networks and what moves people. From high-speed trains, metros, monorails, and trams, to turnkey systems, services, infrastructure, signalling and digital mobility, we offer our diverse customers the broadest portfolio in the industry. Every day, 80,000 colleagues lead the way to greener and smarter mobility worldwide, connecting cities as we reduce carbon and replace cars. Could you be the full-time Simulation and Eco-Design Expert in Bangalore were looking for Your future role Take on a new challenge and apply your comprehensive expertise in simulation and eco-design in a new cutting-edge field. Youll work alongside innovative, dedicated, and forward-thinking teammates. You'll ensure the strategic alignment of simulation tools with our global business processes, contributing to the eco-design initiatives. Day-to-day, youll work closely with teams across the business (Engineering, Methods & Tools, IT Operations, Cybersecurity, Cloud, Sourcing, Finance), manage simulation tool licenses, and much more. Youll specifically take care of developing and maintaining the Simulation tools architecture, but also leading IS&T simulation projects and managing Business as Usual (BaU) activities. Well look to you for: Ensuring alignment with global business processes for the Simulation/CAE domain Collecting and managing simulation demands in coordination with central teams Architecting and building solutions to address the simulation tools/infra requirements of different simulation domains Assisting the lead architect to manage simulation IT budget and keeping it under control Managing simulation license renewals and alignment with business requirements Developing IS&T roadmaps in collaboration with business and IS&T teams Leading simulation projects from requirements to architecture design Maintaining solution documentation and promoting Alstom Core Model All about you We value passion and attitude over experience. Thats why we dont expect you to have every single skill. Instead, weve listed some that we think will help you succeed and grow in this role: Degree in Mechanical Engineering or a related field 10+ years of experience or understanding of the Simulation/CAE domain and related applications Knowledge of HPC and cloud solutions for simulation Familiarity with CAE applications architecture and administration (CFD expertise preferred) A certification in project management or a related field (preferred) Proven leadership skills and business value orientation Excellent communication and collaboration skills Things youll enjoy Join us on a life-long transformative journey the rail industry is here to stay, so you can grow and develop new skills and experiences throughout your career. Youll also: Enjoy stability, challenges and a long-term career free from boring daily routines Work with cutting-edge simulation technologies and eco-design principles Collaborate with transverse teams and helpful colleagues Contribute to innovative projects that shape the future of mobility Utilise our flexible and dynamic working environment Steer your career in whatever direction you choose across functions and countries Benefit from our investment in your development, through award-winning learning Progress towards strategic leadership roles within the IS&T architecture domain Benefit from a fair and dynamic reward package that recognises your performance and potential, plus comprehensive and competitive social coverage (life, medical, pension) You dont need to be a train enthusiast to thrive with us. We guarantee that when you step onto one of our trains with your friends or family, youll be proud. If youre up for the challenge, wed love to hear from you! Important to note As a global business, were an equal-opportunity employer that celebrates diversity across the 63 countries we operate in. Were committed to creating an inclusive workplace for everyone.

Role & responsibilities Thermal and CFD Knowledge & Tool Experience of Pre-Processing, Solver and Post-processing predominantly using ANSYS. Flow and Thermal Engineer

About the Role: Blendmest is seeking a passionate and motivated CAD Design Intern with basic knowledge of SolidWorks, ANSYS, and Fusion 360. This internship is ideal for freshers or students with minimal experience who are eager to build their skills in Drone industry, design, product development, and simulation. As a CAD Design Intern, you will be developing 3D models, creating detailed technical drawings, and performing basic simulations and stress analysis on components. You will get the opportunity to work on real-time projects, primarily in the fields of drones, mechanical systems, and precision parts . Responsibilities: Create 3D CAD models and assemblies using SolidWorks and Fusion 360. Assist in FEA/CFD simulations using ANSYS. Generate and revise manufacturing drawings. Collaborate with the design and engineering teams to iterate and improve designs. Requirements: Basic understanding of SolidWorks, Fusion 360, and ANSYS. Enthusiasm to learn and contribute in a startup environment. Strong attention to detail and problem-solving attitude. Join us in building the future of industrial design and drone technology! Apply Now: info@blendmest.in Job Type: Internship Contract length: 6 months Pay: ₹3,000.00 - ₹6,000.00 per month Schedule: Day shift Work Location: In person

M Tech degree or higher in Mechanical Engineering with Fluid mechanics and CFD. 8 years experience in automotive domain Experience in HVAC simulations, duct flow, external aerodynamics, front end flow simulations Knowledge of multiphase simulations required. Must have good skill with ANSYS-Fluent, Star CCM+ Effective communication skills. Interaction with customer to understand the simulation requirement and objective. Get correct boundary conditions and CAD input. CAD clean up, Meshing, volume meshing and carry out simulations. Prepare reports which can be well understood to the customer with their formats

As Thermal Analysis Engineer, the individual will work with mechanical and electrical Design team to optimize component placement and SSD drive enclosures for thermal performance. mass production. To accomplish your deliverables, you will analyze the design for thermals using CFD tools FloTherm and share the outcome and solution path to team. This will also include correlating thermal models with measurements as part of verification and releasing thermal customer models. Required Qualifications: • BS or MS in Mechanical or Aerospace Engineering degree with 2-3 years of experience in below areas: o Heat transfer and thermal analysis and simulations using CFD tools like ANSYS-Fluent and FloTherm to analyze designs, insight to physics • - Experience in generating experimental test plans for thermal measurements to verify and validate models to gain confidence in simulations o -Coding experience to automate tasks using FloTherm and Matlab • Demonstrated ability to manage multiple projects and meet deliverables’ timeline with no compromise on quality and performance • Demonstrated good verbal (public speaking) and written (in the form of reports and presentations) communications skills • Motivated, self-directed and able to work effectively both independently and in a team Show more Show less