46 Ccnp Certified Jobs

Hi, We are looking for Assistant Application Engineer to work with one of the Fortune - 500 American Multinational based at Bangalore. Desired Skills CCNA/CCNP Certication Network Support WAN/LAN Support Protocol Support Notice - Immediate/ 15 days candidates to apply Interested candidates may apply on saritha.nair@reynasolutions.com

L2 engineer in Ahmedabad Job Description - Candidate needs to have enterprise level Infrastructure operations and deployment experience. Must have hands-on the core networking technologies including security too. A good communication skill is a must. Need to have end to end support and problem-solving attitude. Professional level certification - CCNP or similar would be an added advantage. Hands on experience on CISCO Nexus, ASR, Catalyst switches and routers, Firewalls, SD-WAN and wireless.

-CCNP -Exp in Networking communication elements (i.e. GSM/ Radio, IP-MPLS, FTTX etc), Networking Protocols, Network Security, and related best practise. -Configuring and managing routers, switches, firewalls, GPON, Radio and wireless networks etc.

Role:- L2 Network Engineer Experience:- 3-8 Years Location:- Mumbai (Andheri East-Sakinaka) Work Mode:- 5 Days (WFO) Shift:- General Skill Set:- L2 Networking,Routing & Switching, Firewalls-Pala Alto/cisco/fortigate/fortinate/checkpoint,F5 Load Balancer/Load Balancing. Certification:- CCNA/CCNP(Mandatory)* Qualification:- B.Tech/BCA/BSC(Computers or other related). Kindly share your Updated CV to Priya.k@firstmeridian.com.

Installing, configuring, & supporting Cisco Routers &Switches. Deliver expert-level support for Cisco ACI infrastructure, including troubleshooting, configuration. Basis Understanding of ACI is Must for L2. Good Knowledge of ACI is required for L3.

Position: Cisco Engineer (N+C, R&S, SD-WAN) Experience: Up to 6+ Years Location: Remote Job Description: • Hands-on experience in managing LAN, WAN, SD-WAN, DC Networking, and Wi-Fi . • Strong understanding of TCP/IP, routing protocols, L2/L3 switches, Wi-Fi (802.11), and SD-WAN networks . • Implementation and troubleshooting experience with Wireless Controllers, Access Points, 802.1x, Wi-Fi protocols (802.11a/b/g/n/ae/ac) . • Good understanding of VLAN, VTP, DTP, 802.1Q trunk, STP, MSTP, ACL, SNMP configuration . • Experience working on Routers and Switches (Cisco ASR, ISR, Catalyst, Nexus) . • Configuring and troubleshooting BGP, OSPF, IS-IS, EIGRP, and static routes . • Expertise in STP, MSTP, RSTP, VSTP, HSRP, DHCP configuration and troubleshooting . • Hands-on experience with Cisco Viptela SD-WAN solutions . • Prior experience in implementation and migration projects involving the above-mentioned technologies is mandatory. • Strong troubleshooting and problem-solving skills. • Positive, communicative, and customer-oriented attitude. If you are interested in this opportunity and meet the required qualifications, please share your updated CV at your earliest convenience.

CCNP Certification Mandatory Location: Bangalore, India Mode of Work: Hybrid (1 day work from office Thursdays of every week) Work Timings : 24*7 Shift based Support , Majorly EMEA hrs. and 2 resources in US hrs. Initial period of Contract : 6 Months (to be extended indefinitely in blocks of 6 m) T ech Stack Primary - Cisco R&S Secondary -IP Services - Firewall (PA & Fortinet) Other BlueCoat Proxy and Infoblox - DNS Job Description: Role Responsibilities & Key Accountabilities: Supports the technology lifecycle through the design, build and maintenance of systems, software and applications to ensure the highest quality outcomes across the domains Makes technical design and amendment decisions and independently manages the workload Translates business requirements into technical requirements and infrastructure and network capacity needs by efficiently sourcing data and undertaking appropriate analyses Ensures relevant reporting documentation is completed and follows internal and external standards Schedules and coordinates capacity / network upgrades, liaising with other areas of the business as needed to ensure service level objectives are met Manages upgrades and coordinates internal and third parties where required Creates accurate documentation and monitors system performance to effectively contribute to business and continual improvement activities Supports in deploying emergent engineering patterns across development teams. Coordinates design work in the infrastructure and network domain and contributes to crafting solutions. Qualifications & Experience: Bachelors degree or equivalent in an IT related field Previous experience in Architecture / Engineering Significant experience in technology based roles.

Job Description We are hiring a highly experienced Network Specialist to lead and execute global WAN, SD-WAN, LAN, and WLAN initiatives across a large enterprise infrastructure. The ideal candidate must have hands-on experience in Cisco SD-WAN and should be capable of designing and implementing secure, scalable, and high-performance network solutions. Key Responsibilities Design, plan, and implement complex WAN / LAN / WLAN / SD-WAN network solutions. Execute network integration and transformation projects globally. Support architecture design, technical documentation (HLD, LLD), and knowledge sharing. Collaborate with cybersecurity, operations, and governance teams to ensure compliance. Act as Subject Matter Expert (SME) for WAN and network transport domains. Support incident resolution, performance tuning, and automation opportunities. Mandatory Skills Cisco SD-WAN End-to-end deployment & management (Must Have) Versa SD-WAN Implementation and troubleshooting (Preferred) Routing & Switching Protocols BGP, OSPF, MPLS, GRE, QoS TCP/IP Advanced level understanding LAN / WLAN / WAN / SD-WAN – Hands-on experience in large-scale enterprise environments Firewall & Network Security – Working knowledge of NGFW integration Cloud Networking Concepts – AWS Direct Connect, Azure ExpressRoute, Equinix, Megaport Tools – ThousandEyes, SevOne, CyberArk, Spectrum, MS Entra ID DNS, DHCP, DDI (Infoblox) – Configuration and management SASE / Secure Access / NFV Concepts – Versa/Cisco (Umbrella) preferred Documentation & Design – High-level and low-level network architecture Python (Basic scripting skills) – Preferred for automation Qualification & Certification Bachelor’s / Diploma in Computer Science, IT or relevant field Certifications preferred: Cisco Certified Network Professional (CCNP) Versa Certified SD-WAN Associate / Specialist (VNX100) For any queries reachout at gurpreet.singh@esolglobal.com / 7087000690 (WhatsApp)

As a Network Compliance and Control Engineer, you will play a crucial role in ensuring that our network infrastructure meets internal policies, regulatory requirements, and industry best practices. Your responsibilities will include policy enforcement, configuration audits, regulatory and standards alignment, risk identification and mitigation, and access control validation. You will be responsible for enforcing network configurations and changes to align with corporate security and operational policies. Additionally, you will maintain baseline standards for various network devices such as routers, switches, and firewalls. Regular audits of network device configurations will be conducted by you to detect any deviations. Compliance tools or scripts will be utilized to identify non-compliant settings and generate audit reports. You will map network operations to relevant regulatory frameworks such as ISO 27001, NIST, GDPR, and SOX. Participation in internal and external audits by preparing evidence and remediation plans will also be part of your role. Identifying and mitigating risks, as well as validating access controls, will be essential aspects of your responsibilities. Key performance indicators that you will be measured on include configuration compliance rate, policy violation closure rate, audit finding closure time, access control review frequency, unauthorized configuration change incidents, and compliance audit pass rate. Your functional skills and competencies should include hands-on experience with CISCO (Routing, switching) and Firewall Technology, CCNP certification, and basic knowledge of Switching and Firewalls. You will also be responsible for maintaining controls of firewalls, switches, routers, and access points to ensure network compliance and security.,

Support hours : Predominantly US business hours. Roles and Responsibilities: Acting as a Tier T1.5/2 for GCSC Teams. 1st responders supporting AT&T GCSC strategic services like Flexware, SDWAN OTT Predominantly US business hours. Expertise in Performing network triage Knowledge of different types of transport/Circuits -AVPN,AIA,BB,LTE Managing the process of Service restoral and break/fix functions Scope include Analyze and escalate Prioritizing and analyzing the events in the network Engage right group for software or hardware resources when unavailable or when there is degradation in performance impacting business processes. Ensure monitoring, data capture, and analysis capabilities to quickly identify problem areas and provide corrective action. Ticket Management Work with internal support groups and recommend diagnostic tests based on degree of service impairment Access provider management and associated escalations Negotiate and coordinate with other support centers (i.e. external organizations and internal and external business partners) for sectionalization and testing plans. Escalate ticket according to process based on the established intervals. Technical Skills:- Minimum 2-3 years of relevant experience in telecommunications & managed network infrastructure industry More than 1 years of working experience, preferably on customer services interfacing with clients. 1-2 years of hands on experience on Networking / IT infrastructure as an engineer (any of the one listed WAN, LAN, Voice, IT infrastructure, Hosting, Servers, Firewall, NOC etc) Good knowledge on SDN/SDWAN Viptela, Velocloud, Silverpeak or 128T Excellent knowledge of WAN, LAN & Voice technologies to manage the IT operations Good knowledge on various Router, Switches. Load Balancers, Firewalls, Wireless technology, Access Points, WAN Circuits, SD WAN, Call manager, gateway etc Strong understanding of Voice, Data and IP networks is required. Professional Skills:- Strong understanding of Voice, Data and IP networks is required. Excellent communication skills (verbal & written, technical & interpersonal) Excellent problem-solving skills Highly skilled in the use of PC systems and applications Ability to work well under pressure, set priorities and make well-considered decisions Drive, enthusiasm, initiative, commitment and self-motivation Years of Experience : 2+yrs Education : BE/B.TECH + CCNA/CCNP certified Job ID R-73111 Date posted 07/21/2025

"Experienced in wireless setups (controller HA, AP & SSID configs), Cisco ISE (HA, 802.1x, MAB policies), strong switching/routing knowledge for Adani network, patch upgrades,

Job Summary: We are seeking an experienced and dynamic CCNA/CCNP Trainer to join our esteemed institution and deliver top-notch training in networking technologies. The ideal candidate will have hands-on expertise in MPLS, BGP, Switching and Routing, Wi-Fi Routing, Access Point (WLC), and routing protocols like RIP, EIGRP, OSPF, and SD-WAN. As a CCNA/CCNP trainer, you will be responsible for imparting knowledge, practical skills, and guidance to students looking to build a career in networking and cybersecurity. Key Responsibilities: Deliver Training: Conduct theoretical and practical training sessions for students enrolled in CCNA/CCNP courses. Networking Concepts & Protocols: Teach students about core networking protocols such as MPLS, BGP, RIP, EIGRP, OSPF, and SD-WAN. Wi-Fi & Access Points: Provide training on Wi-Fi routing, configuring access points, and understanding Wireless LAN Controller (WLC) setup and management. Hands-on Labs: Guide students through practical lab sessions, helping them configure and troubleshoot real-world network scenarios. Prepare Course Material: Develop and update course content, lab exercises, and assignments based on industry trends and certifications. Certification Guidance: Assist students in preparing for their CCNA/CCNP exams, ensuring they are ready for certification. Stay Current with Technology: Continuously update your knowledge of new networking technologies and trends to ensure course materials are up-to-date. Student Support: Provide one-on-one assistance to students, helping them with networking challenges and encouraging practical learning. Assessments & Feedback: Regularly assess student progress through quizzes, exams, and practical evaluations, and provide constructive feedback for improvement. Required Skills & Qualifications: Educational Requirements: CCNA (Cisco Certified Network Associate) and CCNP (Cisco Certified Network Professional) certifications are mandatory. Any additional certifications related to networking (e.g., CCIE, CompTIA Network+) will be a plus. Technical Skills: Expertise in MPLS (Multiprotocol Label Switching) and its practical application in enterprise networks. Deep understanding of BGP (Border Gateway Protocol) and its use in inter-domain routing. Proficient in Switching and Routing technologies, including VLANs, trunking, and router configuration. Hands-on experience with Wi-Fi Routing, configuration of Access Points (APs), and Wireless LAN Controller (WLC) management. Expertise in routing protocols such as RIP, EIGRP, OSPF, and their configuration and troubleshooting. Knowledge and practical experience with SD-WAN (Software-Defined WAN) technologies, including configuration and deployment. Experience with configuring and managing VPNs and secure network communications. Job Types: Full-time, Permanent

a) Perform health check-up of network devices under scope of this project in DC and DR b) Prepare reports as per the requirements of Bank c) Take periodical backup of configuration of network devices under scope of this project as per requirements of the Bank d) Verify transfer of logs generated by network devices to Syslog\Log management solution e) Monitor, report and document network related incidents f) Configure network devices as per requirements of the Bank g) Perform root cause analysis and provide reports for network related incidents f) Perform firmware\software upgradation and patching for network devices g) Prepare and maintain network architecture diagrams h) Co-ordinate with OEM for support i) Prepare CR for approval by Bank j) Implement Audit recommendations k) Review capacity and availability of network infrastructure and make recommendations as appropriate. l) Verify and maintain time synchronization among all the devices/solutions under control. m) Making required setup and monitoring the traffic to find out security threats/incidents during the duty hours. n) Implementing security best practices as well as adhere to compliances of regulatory and other government bodies. o) Rectify/replace faulty network devices in scope p) Monitor Warranty/AMC support expiry and take up for renewals REQUIREMENT OF MANPOWER SKILLSET Details of skill set required for the engagement of engineers but not limited to following: Position Skill Set Level-2 (L2) Diploma or above in Computer Science / Electronics / IT / Electrical Engineering/ MCA CCNP certified and above. Certificate should be currently valid and continue to be valid by the resource during the contract period. Minimum overall 5 years (in which minimum 2 years of experience as L2) of experience in routing and switching in spine-leaf architecture post certification.

a) Perform health check-up of network devices under scope of this project in DC and DR b) Prepare reports as per the requirements of Bank c) Take periodical backup of configuration of network devices under scope of this project as per requirements of the Bank d) Verify transfer of logs generated by network devices to Syslog\Log management solution e) Monitor, report and document network related incidents f) Configure network devices as per requirements of the Bank g) Perform root cause analysis and provide reports for network related incidents f) Perform firmware\software upgradation and patching for network devices g) Prepare and maintain network architecture diagrams h) Co-ordinate with OEM for support i) Prepare CR for approval by Bank j) Implement Audit recommendations k) Review capacity and availability of network infrastructure and make recommendations as appropriate. l) Verify and maintain time synchronization among all the devices/solutions under control. m) Making required setup and monitoring the traffic to find out security threats/incidents during the duty hours. n) Implementing security best practices as well as adhere to compliances of regulatory and other government bodies. o) Rectify/replace faulty network devices in scope p) Monitor Warranty/AMC support expiry and take up for renewals REQUIREMENT OF MANPOWER SKILLSET Details of skill set required for the engagement of engineers but not limited to following: Position Skill Set Level-2 (L2) Diploma or above in Computer Science / Electronics / IT / Electrical Engineering/ MCA CCNP certified and above. Certificate should be currently valid and continue to be valid by the resource during the contract period. Minimum overall 5 years (in which minimum 2 years of experience as L2) of experience in routing and switching in spine-leaf architecture post certification.

a) Perform health check-up of network devices under scope of this project in DC and DR b) Prepare reports as per the requirements of Bank c) Take periodical backup of configuration of network devices under scope of this project as per requirements of the Bank d) Verify transfer of logs generated by network devices to Syslog\Log management solution e) Monitor, report and document network related incidents f) Configure network devices as per requirements of the Bank g) Perform root cause analysis and provide reports for network related incidents f) Perform firmware\software upgradation and patching for network devices g) Prepare and maintain network architecture diagrams h) Co-ordinate with OEM for support i) Prepare CR for approval by Bank j) Implement Audit recommendations k) Review capacity and availability of network infrastructure and make recommendations as appropriate. l) Verify and maintain time synchronization among all the devices/solutions under control. m) Making required setup and monitoring the traffic to find out security threats/incidents during the duty hours. n) Implementing security best practices as well as adhere to compliances of regulatory and other government bodies. o) Rectify/replace faulty network devices in scope p) Monitor Warranty/AMC support expiry and take up for renewals REQUIREMENT OF MANPOWER SKILLSET Details of skill set required for the engagement of engineers but not limited to following: Position Skill Set Level-2 (L2) Diploma or above in Computer Science / Electronics / IT / Electrical Engineering/ MCA CCNP certified and above. Certificate should be currently valid and continue to be valid by the resource during the contract period. Minimum overall 5 years (in which minimum 2 years of experience as L2) of experience in routing and switching in spine-leaf architecture post certification.

Network Design Implementation Engineer Experience in Enterprise networking, Network Design and Implementation BGP, OSPF, MPLS. LAN & WAN Technologies, Create High and Low level design document The engineer should be at least CCNP certified.

Role L2 Network Security Engineer Location Chennai Work Timings – 9 Am to 6 PM (Monday to Saturday) Primary Skills - Security CVE Analysis & Resolution Education – Graduate Certification – CCNP or higher certification is mandatory Detailed JD: Security Patching Requirement - Global. Technical Implementation of security fixes. OS Upgrades for the various products mentioned above. Preparation of Technical Documentation. Adopt Automation Tools to implement the Security Fixes. Ability to work on weekends & after office hours. Strictly follow the bank's change processes & procedures. Change coordination. Skill set requirement: Industry certified (CCNP & higher required) etc. Knowledge & Experience in Security CVE Analysis & Resolution (3-5 yrs) Technical & practical experience on Cisco Routers, Switches, Nexus, ACI. FortiGate Firewalls. Wireless (Cisco, Aruba). Good command over English & ability to work with various people & on network devices across various countries.

About Company:- LIRA is a specialized recruitment and staffing agency that provides recruitment Solutions for businesses. Through our alliances and relations with partner companies, we can help you take "The Big Step" and provide the experience needed to enter the workforce. We provide employers and businesses with the opportunity to connect with the brightest talents and the new generation workforce. Role Level 2/ 3 Network (Australian & New Zealand Exp) Descriptions:- The Role We are looking for a Network Engineer, experienced in Service Desk and Projects, to join our networking team. The role involves a combination of 2nd and 3rd level support, maintenance and project work. Duties for this role include: Technical implementation & maintenance of new & existing customers systems. Provide 3rd level escalation for Sparx Solutions Service Desk. Perform the role of client technical SME during any priority incident within your technical domain. Manage to resolution all assigned incidents, requests, events and changes. Managing the day-to-day ICT environment. Requirements The ideal candidate is an experienced, broadly skilled Network Engineer, coming from a system integrator/managed services provider background, with sound commercial and technical skills. Key skills and experience include: Layer 2 switching technologies including - Spanning Tree, VLANs, Discovery protocols (CDP, LLDP) Layer 3 routing technologies including - Routing protocols, ACL's, NAT & PAT, Policy-based routing, L3 QoS and Netflow ¢ Firewall configuration to best practice requirements - Security & NAT rule configuration, VPN's DPI, Intrusion detection & prevention, ¢ Wireless technologies & concepts - Common protocols, Site survey & deployment best practices ¢ Solid and demonstrable knowledge of networking & security fundamentals - OSI Model, common protocols and ports, Layer 1 technologies & hardware ¢ Strong SD-WAN exposure (Cato and Velocloud highly desirable) ¢ Troubleshooting and resolving complex technical issues to critical timelines. ¢ Cisco umbrella capabilities are essential ¢ CCNP qualifications or equivalent experience is required ¢ Practical understanding of ITIL framework ¢ Palo Alto and Fortinet firewalls experience are highly desirable ¢ Juniper Switches and Router experience are highly desirable ¢ Mist wireless proficiency is greatly valued

Design, implement, & maintain customer's network infrastructure, ensuring its reliability and performance. (Design new Network, upgradation of existing Network etc.). Configuring & managing network devices as routers, switches, firewalls, GPON, Radio

Required Professional and Technical Expertise : 1. Minimum of 10-12 years experience focused on Data Center network support, configuration, and implementation. 2. Minimum 8+ years of core switching, routing, MPLS and FWs. 3. In-depth knowledge of and experience with major network protocols and technologies including BGP, OSPF, MP-BGP EVPN, VXLAN and VPC. 4. Expertise to Cisco ACI / Cisco Nexus/Fortigate/Checkpoint Platform platform and related switching configurations. 5. Experience deploying and maintaining wide area networks with emphasis on IPSec, L2L VPN, and Remote Access VPN. 6. Networking and security architectural and engineering support experience across local, regional, and global domains. 7. Ability to effectively execute multiple IT projects and deadlines with limited supervision. 8. Excellent written and oral communication skills. 9. Should be able to lead a team of L1/L2. 10. Should be able to drive High severity calls and drive RCA. 11. Should be able to participate in architecture level discussion with client. 12. Follow SLA and compliance. 13. Experience on working on datacentres with more than 500 network and security components. 14. Should be able to plan lean shift rosters and align the shift operations as per workloads. 15. CCNP Certified Mandatory. Preferred Professional and Technical Expertise : 1. PMP/ITIL or CCIE certification. 2. Ability to interact confidently with stakeholders of all levels 3. Understanding and daily use of Microsoft Office 365 Suite and other productivity tools (e.g., Excel, Word, PowerPoint, SharePoint) to accomplish audit and compliance related tasks.

Roles and Responsibilities Acting as a Tier T1.5 for GCSC Teams. 1st responders supporting AT&T GCSC strategic services like Flexware,SDWAN OTT Expertise in Performing network triage Knowledge of different types of transport/Circuits -AVPN,AIA,BB,LTE Managing the process of Service restoral and break/fix functions Scope include Analyze and escalate. Prioritizing and analyzing the events in the network Engage right group for software or hardware resources when unavailable or when there is degradation in performance impacting business processes. Ensure monitoring, data capture, and analysis capabilities to quickly identify problem areas and provide corrective action. Ticket Management Work with internal support groups and recommend diagnostic tests based on degree of service impairment Access provider management and associated escalations Negotiate and coordinate with other support centers (i.e. external organizations and internal and external business partners) for sectionalization and testing plans. Escalate ticket according to process based on the established intervals. Knowledge and Skills Required to Perform the Role Technical Skills:- Minimum 2-3 years of relevant experience in telecommunications & managed network infrastructure industry No less than 1 years of working experience, preferably on customer services interfacing with clients. No less than 1-2 years of hands on experience on Networking / IT infrastructure as an engineer (any of the one listed WAN, LAN, Voice, IT infrastructure, Hosting, Servers, Firewall, NOC etc) Good knowledge on SDN/SDWAN Viptela, Velocloud, Silverpeak or 128T Excellent knowledge of WAN, LAN & Voice technologies to manage the IT operations Good knowledge on various Router, Switches. Load Balancers, Firewalls, Wireless technology, Access Points, WAN Circuits, SD WAN, Call manager, gateway etc Strong understanding of Voice, Data and IP networks is required. Professional Skills:- Excellent communication skills (verbal & written, technical & interpersonal) Excellent telephone manner Excellent problem solving skills Professionalism at all times Highly skilled in the use of PC systems and applications Ability to work well under pressure, set priorities and make well-considered decisions Drive, enthusiasm, initiative, commitment and self-motivation Resourcefulness and flexibility Ability to work well in a team Years of Experience 2-6+ years Education BE/B.TECH + CCNA/CCNP certified Job ID R-72971 Date posted 07/01/2025

Role: Tier T1.5 Support for AT&T GCSC Teams Responsibilities: First responder for strategic services (Flexware, SDWAN OTT) Network triage and service restoration. Managing transport circuits (AVPN, AIA, BB, LTE) Analyzing and escalating network events Coordinating software/hardware resources Monitoring, data capture, and problem analysis Ticket management and escalations Working with internal/external support groups Negotiating with other support centers for testing plans Technical Skills: 1-3 years in telecommunications/managed network infrastructure 1+ years in customer service/client interfacing 1-2 years in Networking/IT infrastructure (WAN, LAN, Voice, etc.) Good to have Knowledge of SDN/SDWAN (Viptela, Velocloud, Silverpeak, 128T) Good in WAN, LAN, voice technologies, routers, switches, firewalls, etc. Sound understanding of Voice, Data, and IP networks. Professional Skills: Excellent verbal and written communication Problem-solving abilities Professionalism and telephone etiquette Proficient with PC systems and applications Ability to work under pressure and prioritize tasks. Drive, enthusiasm, and self-motivation. Resourcefulness and team collaboration skills Years of Experience 1-3+ Years Education BE/B.TECH + CCNA/CCNP certified. Job ID R-72969 Date posted 07/01/2025

Role & responsibilities • Bachelor's degree in computer science, Information Technology, or a related field with a focus on computer networks. • Minimum of 7 years of experience as a Network Engineer, and 4 years of Network Engineer with a focus on designing and managing complex networks. • Excellent ownership and project management skills, with the ability to take full responsibility for network related projects and incidents. • In-depth knowledge of Cisco, or Juniper Routing, switching • In-depth knowledge of Palo Alto, Cisco FMC, or Fortinet • Strong understanding of network protocols, routing, switching, and network security principles. • Obtained active certifications, such as CCNP, Firewall certifications such as Palo alto, Cisco, Fortinet for Senior Network Engineer positions. • Experience in network design, implementation, and troubleshooting in enterpriselevel environments. • Proficiency in network monitoring and management tools. • Strong analytical and problem-solving skills, with the ability to diagnose and resolve complex network issues. • Excellent written communication skills, with a good technical writing ability to document network configurations, troubleshooting procedures, and root cause analysis. • Experience in client-facing roles, with the ability to effectively communicate technical concepts and address client inquiries. • Ability to write robust root cause analysis documents, providing detailed insights into network incidents and resolutions. • Strong collaboration and interpersonal skills to work effectively with crossfunctional teams and clients. • Ability to adapt to evolving technologies and industry trends. The successful candidate will have in-depth knowledge and understanding of complete Data Centre Operations. S/he will have effective organizational and time and workflow management skills to adhere to strict timelines. S/he will be action-oriented and experienced in performing technical work with tact, discretion, and diplomacy in efforts to provide a high level of customer service.

Job Title : L2 NOC Engineer Location : Noida Shift: 24x7 rotational Job Summary: The L2 NOC Engineer will be responsible for in-depth troubleshooting, root cause analysis, and advanced incident handling, ensuring network stability and optimal performance. The role requires strong technical expertise to resolve escalated issues and collaborate with L3 engineers for complex problem resolution. Key Responsibilities: - Advanced troubleshooting of network devices, including routers, switches, firewalls, servers, storage, and cloud infrastructure. - Root cause analysis for recurring incidents and long-term resolution strategies. - Incident escalation management- providing detailed analysis to L3 teams when needed. - Configuration management - implementing network changes, patch updates, and system optimizations. - Monitoring & performance tuning - analyzing network health metrics for proactive issue prevention. - Documentation & reporting - maintaining detailed incident reports and process improvement recommendations. - Security & compliance adherence - ensuring best practices for firewall policies, VPN setups, and access controls. - Collaboration with vendors & ISPs for hardware replacements, upgrades, and troubleshooting. Required Skills & Qualifications: - Strong networking expertise (TCP/IP, MPLS, BGP, OSPF, VLANs). - Experience with monitoring tools like SolarWinds, Nagios, PRTG, or Zabbix. - Hands-on experience in configuring and troubleshooting routers, switches, firewalls, and VPNs. - Scripting knowledge (Python, PowerShell, or Bash) for automation (preferred). - Deep understanding of security protocols (firewalls, IDS/IPS, SIEM solutions). - Excellent analytical skills for diagnosing network and system-related issues. - Ability to mentor L1 engineers and support escalated issues efficiently. Preferred Certifications: - CCNP or equivalent advanced networking certification. - ITIL certification for structured incident and service management. - Security certifications like CEH, CISSP, or CompTIA Security+(preferred).

Responsibilities: * Design, implement, and maintain network infrastructure using Linux, CCNA/CCNP certifications, VMware, System Networking, Networking Protocols, Scripting, Automation Tools.