368 Blast Jobs - Page 11

Position – Service Engineer (On Roll) at OEM CTC – Hike as per industry Interview mode – Virtual & Online Test Location – UCIL – Tummanapalle – AP Description (UCIL Andhra Pradesh) Job Summary Responsible for ensuring that the heavy types of equipment is in safe operating condition by conducting routine maintenance and scheduling needed repairs. Accountable for Planning & execution of day to day maintenance activities of heavy mobile mining types of machinery like Loaders, Underground Drilling Machines, Jumbos, HDD, DTH surface drill rigs, face drilling rigs to blast hole drilling rig, etc. Key Duties and Responsibilities Supervise, coordinate and schedule the maintenance of all plant heavy equipment to ensure identification and elimination of equipment breakdowns. Perform routine check on raising equipment for proper performance and inspect equipment to detect faults and malfunctions Test repaired raising equipment for proper performance and to ensure that work meets manufacturers' specifications. Clean, lubricate and perform other routine maintenance work on raising equipment. Perform any other duties as may be assigned by the Section Head, HEMM Maintenance from time to time. To ensure sustained availability of equipment for mines operation with minimum operating costs. To ensure proper housekeeping at all times i.e. before and after any maintenance works. Liaise with OEM service engineers/representatives as in equipment commissioning, warranty, product support and technical manpower development Perform all performance appraisal of staff/intending staff for proper upgrading/selection. It is the responsibility of the dumper sectional to ensure safety of men working with him in accordance with the company’s safety practices/guidelines and also the safety of equipment working under his control. Any near misses/accidents is to be immediately reported to the superiors for timely actions to be taken. Requirements Education and Work Experience Diploma / Bachelor’s degree or its equivalent in Mechanical Engineering or related discipline. Minimum of ten (04 to 10) years of experience in Loader / HEMM maintenance & service Skills and Competencies Knowledge of repair and maintenance of UG heavy equipment. Good oral and written communication skills. Good networking and teaming skills. Good data gathering and analysis skills. Baseline problem analysis and solving skills. Creativity and an ability to think out of the box. Proficiency in the use of office productivity tools Benefits Private Health Insurance Paid Time Off Training and Development UG Allowances / Site Allowances

Position – Service Engineer (On Roll) at OEM CTC – Hike as per industry Interview mode – Virtual & Online Test Location – UCIL – Tummanapalle – AP Description (UCIL Andhra Pradesh) Job Summary Responsible for ensuring that the heavy types of equipment is in safe operating condition by conducting routine maintenance and scheduling needed repairs. Accountable for Planning & execution of day to day maintenance activities of heavy mobile mining types of machinery like Loaders, Underground Drilling Machines, Jumbos, HDD, DTH surface drill rigs, face drilling rigs to blast hole drilling rig, etc. Key Duties and Responsibilities Supervise, coordinate and schedule the maintenance of all plant heavy equipment to ensure identification and elimination of equipment breakdowns. Perform routine check on raising equipment for proper performance and inspect equipment to detect faults and malfunctions Test repaired raising equipment for proper performance and to ensure that work meets manufacturers' specifications. Clean, lubricate and perform other routine maintenance work on raising equipment. Perform any other duties as may be assigned by the Section Head, HEMM Maintenance from time to time. To ensure sustained availability of equipment for mines operation with minimum operating costs. To ensure proper housekeeping at all times i.e. before and after any maintenance works. Liaise with OEM service engineers/representatives as in equipment commissioning, warranty, product support and technical manpower development Perform all performance appraisal of staff/intending staff for proper upgrading/selection. It is the responsibility of the dumper sectional to ensure safety of men working with him in accordance with the company’s safety practices/guidelines and also the safety of equipment working under his control. Any near misses/accidents is to be immediately reported to the superiors for timely actions to be taken. Requirements Education and Work Experience Diploma / Bachelor’s degree or its equivalent in Mechanical Engineering or related discipline. Minimum of ten (04 to 10) years of experience in Loader / HEMM maintenance & service Skills and Competencies Knowledge of repair and maintenance of UG heavy equipment. Good oral and written communication skills. Good networking and teaming skills. Good data gathering and analysis skills. Baseline problem analysis and solving skills. Creativity and an ability to think out of the box. Proficiency in the use of office productivity tools Benefits Private Health Insurance Paid Time Off Training and Development UG Allowances / Site Allowances

Position – Service Engineer (On Roll) at OEM CTC – Hike as per industry Interview mode – Virtual & Online Test Location – UCIL – Tummanapalle – AP Description (UCIL Andhra Pradesh) Job Summary Responsible for ensuring that the heavy types of equipment is in safe operating condition by conducting routine maintenance and scheduling needed repairs. Accountable for Planning & execution of day to day maintenance activities of heavy mobile mining types of machinery like Loaders, Underground Drilling Machines, Jumbos, HDD, DTH surface drill rigs, face drilling rigs to blast hole drilling rig, etc. Key Duties and Responsibilities Supervise, coordinate and schedule the maintenance of all plant heavy equipment to ensure identification and elimination of equipment breakdowns. Perform routine check on raising equipment for proper performance and inspect equipment to detect faults and malfunctions Test repaired raising equipment for proper performance and to ensure that work meets manufacturers' specifications. Clean, lubricate and perform other routine maintenance work on raising equipment. Perform any other duties as may be assigned by the Section Head, HEMM Maintenance from time to time. To ensure sustained availability of equipment for mines operation with minimum operating costs. To ensure proper housekeeping at all times i.e. before and after any maintenance works. Liaise with OEM service engineers/representatives as in equipment commissioning, warranty, product support and technical manpower development Perform all performance appraisal of staff/intending staff for proper upgrading/selection. It is the responsibility of the dumper sectional to ensure safety of men working with him in accordance with the company’s safety practices/guidelines and also the safety of equipment working under his control. Any near misses/accidents is to be immediately reported to the superiors for timely actions to be taken. Requirements Education and Work Experience Diploma / Bachelor’s degree or its equivalent in Mechanical Engineering or related discipline. Minimum of ten (04 to 10) years of experience in Loader / HEMM maintenance & service Skills and Competencies Knowledge of repair and maintenance of UG heavy equipment. Good oral and written communication skills. Good networking and teaming skills. Good data gathering and analysis skills. Baseline problem analysis and solving skills. Creativity and an ability to think out of the box. Proficiency in the use of office productivity tools Benefits Private Health Insurance Paid Time Off Training and Development UG Allowances / Site Allowances

Position – Service Engineer (On Roll) at OEM CTC – Hike as per industry Interview mode – Virtual & Online Test Location – UCIL – Tummanapalle – AP Description (UCIL Andhra Pradesh) Job Summary Responsible for ensuring that the heavy types of equipment is in safe operating condition by conducting routine maintenance and scheduling needed repairs. Accountable for Planning & execution of day to day maintenance activities of heavy mobile mining types of machinery like Loaders, Underground Drilling Machines, Jumbos, HDD, DTH surface drill rigs, face drilling rigs to blast hole drilling rig, etc. Key Duties and Responsibilities Supervise, coordinate and schedule the maintenance of all plant heavy equipment to ensure identification and elimination of equipment breakdowns. Perform routine check on raising equipment for proper performance and inspect equipment to detect faults and malfunctions Test repaired raising equipment for proper performance and to ensure that work meets manufacturers' specifications. Clean, lubricate and perform other routine maintenance work on raising equipment. Perform any other duties as may be assigned by the Section Head, HEMM Maintenance from time to time. To ensure sustained availability of equipment for mines operation with minimum operating costs. To ensure proper housekeeping at all times i.e. before and after any maintenance works. Liaise with OEM service engineers/representatives as in equipment commissioning, warranty, product support and technical manpower development Perform all performance appraisal of staff/intending staff for proper upgrading/selection. It is the responsibility of the dumper sectional to ensure safety of men working with him in accordance with the company’s safety practices/guidelines and also the safety of equipment working under his control. Any near misses/accidents is to be immediately reported to the superiors for timely actions to be taken. Requirements Education and Work Experience Diploma / Bachelor’s degree or its equivalent in Mechanical Engineering or related discipline. Minimum of ten (04 to 10) years of experience in Loader / HEMM maintenance & service Skills and Competencies Knowledge of repair and maintenance of UG heavy equipment. Good oral and written communication skills. Good networking and teaming skills. Good data gathering and analysis skills. Baseline problem analysis and solving skills. Creativity and an ability to think out of the box. Proficiency in the use of office productivity tools Benefits Private Health Insurance Paid Time Off Training and Development UG Allowances / Site Allowances

Position – Service Engineer (On Roll) at OEM CTC – Hike as per industry Interview mode – Virtual & Online Test Location – UCIL – Tummanapalle – AP Description (UCIL Andhra Pradesh) Job Summary Responsible for ensuring that the heavy types of equipment is in safe operating condition by conducting routine maintenance and scheduling needed repairs. Accountable for Planning & execution of day to day maintenance activities of heavy mobile mining types of machinery like Loaders, Underground Drilling Machines, Jumbos, HDD, DTH surface drill rigs, face drilling rigs to blast hole drilling rig, etc. Key Duties and Responsibilities Supervise, coordinate and schedule the maintenance of all plant heavy equipment to ensure identification and elimination of equipment breakdowns. Perform routine check on raising equipment for proper performance and inspect equipment to detect faults and malfunctions Test repaired raising equipment for proper performance and to ensure that work meets manufacturers' specifications. Clean, lubricate and perform other routine maintenance work on raising equipment. Perform any other duties as may be assigned by the Section Head, HEMM Maintenance from time to time. To ensure sustained availability of equipment for mines operation with minimum operating costs. To ensure proper housekeeping at all times i.e. before and after any maintenance works. Liaise with OEM service engineers/representatives as in equipment commissioning, warranty, product support and technical manpower development Perform all performance appraisal of staff/intending staff for proper upgrading/selection. It is the responsibility of the dumper sectional to ensure safety of men working with him in accordance with the company’s safety practices/guidelines and also the safety of equipment working under his control. Any near misses/accidents is to be immediately reported to the superiors for timely actions to be taken. Requirements Education and Work Experience Diploma / Bachelor’s degree or its equivalent in Mechanical Engineering or related discipline. Minimum of ten (04 to 10) years of experience in Loader / HEMM maintenance & service Skills and Competencies Knowledge of repair and maintenance of UG heavy equipment. Good oral and written communication skills. Good networking and teaming skills. Good data gathering and analysis skills. Baseline problem analysis and solving skills. Creativity and an ability to think out of the box. Proficiency in the use of office productivity tools Benefits Private Health Insurance Paid Time Off Training and Development UG Allowances / Site Allowances

Position – Service Engineer (On Roll) at OEM CTC – Hike as per industry Interview mode – Virtual & Online Test Location – UCIL – Tummanapalle – AP Description (UCIL Andhra Pradesh) Job Summary Responsible for ensuring that the heavy types of equipment is in safe operating condition by conducting routine maintenance and scheduling needed repairs. Accountable for Planning & execution of day to day maintenance activities of heavy mobile mining types of machinery like Loaders, Underground Drilling Machines, Jumbos, HDD, DTH surface drill rigs, face drilling rigs to blast hole drilling rig, etc. Key Duties and Responsibilities Supervise, coordinate and schedule the maintenance of all plant heavy equipment to ensure identification and elimination of equipment breakdowns. Perform routine check on raising equipment for proper performance and inspect equipment to detect faults and malfunctions Test repaired raising equipment for proper performance and to ensure that work meets manufacturers' specifications. Clean, lubricate and perform other routine maintenance work on raising equipment. Perform any other duties as may be assigned by the Section Head, HEMM Maintenance from time to time. To ensure sustained availability of equipment for mines operation with minimum operating costs. To ensure proper housekeeping at all times i.e. before and after any maintenance works. Liaise with OEM service engineers/representatives as in equipment commissioning, warranty, product support and technical manpower development Perform all performance appraisal of staff/intending staff for proper upgrading/selection. It is the responsibility of the dumper sectional to ensure safety of men working with him in accordance with the company’s safety practices/guidelines and also the safety of equipment working under his control. Any near misses/accidents is to be immediately reported to the superiors for timely actions to be taken. Requirements Education and Work Experience Diploma / Bachelor’s degree or its equivalent in Mechanical Engineering or related discipline. Minimum of ten (04 to 10) years of experience in Loader / HEMM maintenance & service Skills and Competencies Knowledge of repair and maintenance of UG heavy equipment. Good oral and written communication skills. Good networking and teaming skills. Good data gathering and analysis skills. Baseline problem analysis and solving skills. Creativity and an ability to think out of the box. Proficiency in the use of office productivity tools Benefits Private Health Insurance Paid Time Off Training and Development UG Allowances / Site Allowances

Position – Service Engineer (On Roll) at OEM CTC – Hike as per industry Interview mode – Virtual & Online Test Location – UCIL – Tummanapalle – AP Description (UCIL Andhra Pradesh) Job Summary Responsible for ensuring that the heavy types of equipment is in safe operating condition by conducting routine maintenance and scheduling needed repairs. Accountable for Planning & execution of day to day maintenance activities of heavy mobile mining types of machinery like Loaders, Underground Drilling Machines, Jumbos, HDD, DTH surface drill rigs, face drilling rigs to blast hole drilling rig, etc. Key Duties and Responsibilities Supervise, coordinate and schedule the maintenance of all plant heavy equipment to ensure identification and elimination of equipment breakdowns. Perform routine check on raising equipment for proper performance and inspect equipment to detect faults and malfunctions Test repaired raising equipment for proper performance and to ensure that work meets manufacturers' specifications. Clean, lubricate and perform other routine maintenance work on raising equipment. Perform any other duties as may be assigned by the Section Head, HEMM Maintenance from time to time. To ensure sustained availability of equipment for mines operation with minimum operating costs. To ensure proper housekeeping at all times i.e. before and after any maintenance works. Liaise with OEM service engineers/representatives as in equipment commissioning, warranty, product support and technical manpower development Perform all performance appraisal of staff/intending staff for proper upgrading/selection. It is the responsibility of the dumper sectional to ensure safety of men working with him in accordance with the company’s safety practices/guidelines and also the safety of equipment working under his control. Any near misses/accidents is to be immediately reported to the superiors for timely actions to be taken. Requirements Education and Work Experience Diploma / Bachelor’s degree or its equivalent in Mechanical Engineering or related discipline. Minimum of ten (04 to 10) years of experience in Loader / HEMM maintenance & service Skills and Competencies Knowledge of repair and maintenance of UG heavy equipment. Good oral and written communication skills. Good networking and teaming skills. Good data gathering and analysis skills. Baseline problem analysis and solving skills. Creativity and an ability to think out of the box. Proficiency in the use of office productivity tools Benefits Private Health Insurance Paid Time Off Training and Development UG Allowances / Site Allowances

Work Type: Full-time | On-site | Working Hours: Standard plant shift hours Location – Haresamudram, India Compensation (Yearly): ₹1,200,000 – ₹1,500,000 Note: If shortlisted, we’ll contact you via WhatsApp and email. Please monitor both and respond promptly . About The Client We are hiring for a reputed manufacturing plant with a large-scale blast furnace utility setup. The plant focuses on high operational uptime, utility cost optimization, and strict adherence to safety and compliance standards. About The Role We are seeking a Utility Operations Manager with hands-on experience in operating and maintaining Blast Furnace utility systems. The ideal candidate will lead the utility function to ensure an uninterrupted supply of essential resources like water, air, oxygen, and nitrogen to the plant. This role involves leadership of plant staff, adherence to HES norms, and efficient maintenance of critical equipment like blowers, compressors, WTP, DM plants, and more. Key Responsibilities Ensure uninterrupted utility supply (Water, Air, Oxygen, Nitrogen) to blast furnace operations Operate and maintain equipment such as Blowers, Compressors, DG Pumps, RO, UF, and Vacuum Pumps Lead and train plant operations team; ensure full compliance with HES standards Manage operation and maintenance of STP, ETP, DM Plant, VPSA Oxygen, PSA Nitrogen systems Conduct RCA for failures and implement corrective and preventive measures Monitor and optimize equipment performance, MTTR, and MTBF Must-Have Qualifications B.E./B.Tech. in Mechanical Engineering or related discipline 12–14 years of experience in Utility/Blast Furnace operations and maintenance Proficiency in handling Water Management Systems, Compressors, DG sets, and Oxygen/Nitrogen plants Expertise in SAP for plant maintenance and material management Proven experience in handling RCA, SOPs, preventive maintenance, and safety policies Strong leadership and team management capabilities Ability to work in high-pressure plant environments, including noise and hazardous zones Preferred Industry Exposure Steel/Heavy Manufacturing/Power Plant/Utility Services Show more Show less

Work Type: Full-time | On-site | Working Hours: Standard plant shift hours Location – Haresamudram, India Compensation (Yearly): ₹1,200,000 – ₹1,500,000 Note: If shortlisted, we’ll contact you via WhatsApp and email. Please monitor both and respond promptly . About The Client We are hiring for a reputed manufacturing plant with a large-scale blast furnace utility setup. The plant focuses on high operational uptime, utility cost optimization, and strict adherence to safety and compliance standards. About The Role We are seeking a Utility Operations Manager with hands-on experience in operating and maintaining Blast Furnace utility systems. The ideal candidate will lead the utility function to ensure an uninterrupted supply of essential resources like water, air, oxygen, and nitrogen to the plant. This role involves leadership of plant staff, adherence to HES norms, and efficient maintenance of critical equipment like blowers, compressors, WTP, DM plants, and more. Key Responsibilities Ensure uninterrupted utility supply (Water, Air, Oxygen, Nitrogen) to blast furnace operations Operate and maintain equipment such as Blowers, Compressors, DG Pumps, RO, UF, and Vacuum Pumps Lead and train plant operations team; ensure full compliance with HES standards Manage operation and maintenance of STP, ETP, DM Plant, VPSA Oxygen, PSA Nitrogen systems Conduct RCA for failures and implement corrective and preventive measures Monitor and optimize equipment performance, MTTR, and MTBF Must-Have Qualifications B.E./B.Tech. in Mechanical Engineering or related discipline 12–14 years of experience in Utility/Blast Furnace operations and maintenance Proficiency in handling Water Management Systems, Compressors, DG sets, and Oxygen/Nitrogen plants Expertise in SAP for plant maintenance and material management Proven experience in handling RCA, SOPs, preventive maintenance, and safety policies Strong leadership and team management capabilities Ability to work in high-pressure plant environments, including noise and hazardous zones Preferred Industry Exposure Steel/Heavy Manufacturing/Power Plant/Utility Services Show more Show less

Work Type: Full-time | On-site | Working Hours: Standard plant shift hours Location – Haresamudram, India Compensation (Yearly): ₹1,200,000 – ₹1,500,000 Note: If shortlisted, we’ll contact you via WhatsApp and email. Please monitor both and respond promptly . About The Client We are hiring for a reputed manufacturing plant with a large-scale blast furnace utility setup. The plant focuses on high operational uptime, utility cost optimization, and strict adherence to safety and compliance standards. About The Role We are seeking a Utility Operations Manager with hands-on experience in operating and maintaining Blast Furnace utility systems. The ideal candidate will lead the utility function to ensure an uninterrupted supply of essential resources like water, air, oxygen, and nitrogen to the plant. This role involves leadership of plant staff, adherence to HES norms, and efficient maintenance of critical equipment like blowers, compressors, WTP, DM plants, and more. Key Responsibilities Ensure uninterrupted utility supply (Water, Air, Oxygen, Nitrogen) to blast furnace operations Operate and maintain equipment such as Blowers, Compressors, DG Pumps, RO, UF, and Vacuum Pumps Lead and train plant operations team; ensure full compliance with HES standards Manage operation and maintenance of STP, ETP, DM Plant, VPSA Oxygen, PSA Nitrogen systems Conduct RCA for failures and implement corrective and preventive measures Monitor and optimize equipment performance, MTTR, and MTBF Must-Have Qualifications B.E./B.Tech. in Mechanical Engineering or related discipline 12–14 years of experience in Utility/Blast Furnace operations and maintenance Proficiency in handling Water Management Systems, Compressors, DG sets, and Oxygen/Nitrogen plants Expertise in SAP for plant maintenance and material management Proven experience in handling RCA, SOPs, preventive maintenance, and safety policies Strong leadership and team management capabilities Ability to work in high-pressure plant environments, including noise and hazardous zones Preferred Industry Exposure Steel/Heavy Manufacturing/Power Plant/Utility Services Show more Show less

Work Type: Full-time | On-site | Working Hours: Standard plant shift hours Location – Haresamudram, India Compensation (Yearly): ₹1,200,000 – ₹1,500,000 Note: If shortlisted, we’ll contact you via WhatsApp and email. Please monitor both and respond promptly . About The Client We are hiring for a reputed manufacturing plant with a large-scale blast furnace utility setup. The plant focuses on high operational uptime, utility cost optimization, and strict adherence to safety and compliance standards. About The Role We are seeking a Utility Operations Manager with hands-on experience in operating and maintaining Blast Furnace utility systems. The ideal candidate will lead the utility function to ensure an uninterrupted supply of essential resources like water, air, oxygen, and nitrogen to the plant. This role involves leadership of plant staff, adherence to HES norms, and efficient maintenance of critical equipment like blowers, compressors, WTP, DM plants, and more. Key Responsibilities Ensure uninterrupted utility supply (Water, Air, Oxygen, Nitrogen) to blast furnace operations Operate and maintain equipment such as Blowers, Compressors, DG Pumps, RO, UF, and Vacuum Pumps Lead and train plant operations team; ensure full compliance with HES standards Manage operation and maintenance of STP, ETP, DM Plant, VPSA Oxygen, PSA Nitrogen systems Conduct RCA for failures and implement corrective and preventive measures Monitor and optimize equipment performance, MTTR, and MTBF Must-Have Qualifications B.E./B.Tech. in Mechanical Engineering or related discipline 12–14 years of experience in Utility/Blast Furnace operations and maintenance Proficiency in handling Water Management Systems, Compressors, DG sets, and Oxygen/Nitrogen plants Expertise in SAP for plant maintenance and material management Proven experience in handling RCA, SOPs, preventive maintenance, and safety policies Strong leadership and team management capabilities Ability to work in high-pressure plant environments, including noise and hazardous zones Preferred Industry Exposure Steel/Heavy Manufacturing/Power Plant/Utility Services Show more Show less

Work Type: Full-time | On-site | Working Hours: Standard plant shift hours Location – Haresamudram, India Compensation (Yearly): ₹1,200,000 – ₹1,500,000 Note: If shortlisted, we’ll contact you via WhatsApp and email. Please monitor both and respond promptly . About The Client We are hiring for a reputed manufacturing plant with a large-scale blast furnace utility setup. The plant focuses on high operational uptime, utility cost optimization, and strict adherence to safety and compliance standards. About The Role We are seeking a Utility Operations Manager with hands-on experience in operating and maintaining Blast Furnace utility systems. The ideal candidate will lead the utility function to ensure an uninterrupted supply of essential resources like water, air, oxygen, and nitrogen to the plant. This role involves leadership of plant staff, adherence to HES norms, and efficient maintenance of critical equipment like blowers, compressors, WTP, DM plants, and more. Key Responsibilities Ensure uninterrupted utility supply (Water, Air, Oxygen, Nitrogen) to blast furnace operations Operate and maintain equipment such as Blowers, Compressors, DG Pumps, RO, UF, and Vacuum Pumps Lead and train plant operations team; ensure full compliance with HES standards Manage operation and maintenance of STP, ETP, DM Plant, VPSA Oxygen, PSA Nitrogen systems Conduct RCA for failures and implement corrective and preventive measures Monitor and optimize equipment performance, MTTR, and MTBF Must-Have Qualifications B.E./B.Tech. in Mechanical Engineering or related discipline 12–14 years of experience in Utility/Blast Furnace operations and maintenance Proficiency in handling Water Management Systems, Compressors, DG sets, and Oxygen/Nitrogen plants Expertise in SAP for plant maintenance and material management Proven experience in handling RCA, SOPs, preventive maintenance, and safety policies Strong leadership and team management capabilities Ability to work in high-pressure plant environments, including noise and hazardous zones Preferred Industry Exposure Steel/Heavy Manufacturing/Power Plant/Utility Services Show more Show less

Work Type: Full-time | On-site | Working Hours: Standard plant shift hours Location – Haresamudram, India Compensation (Yearly): ₹1,200,000 – ₹1,500,000 Note: If shortlisted, we’ll contact you via WhatsApp and email. Please monitor both and respond promptly . About The Client We are hiring for a reputed manufacturing plant with a large-scale blast furnace utility setup. The plant focuses on high operational uptime, utility cost optimization, and strict adherence to safety and compliance standards. About The Role We are seeking a Utility Operations Manager with hands-on experience in operating and maintaining Blast Furnace utility systems. The ideal candidate will lead the utility function to ensure an uninterrupted supply of essential resources like water, air, oxygen, and nitrogen to the plant. This role involves leadership of plant staff, adherence to HES norms, and efficient maintenance of critical equipment like blowers, compressors, WTP, DM plants, and more. Key Responsibilities Ensure uninterrupted utility supply (Water, Air, Oxygen, Nitrogen) to blast furnace operations Operate and maintain equipment such as Blowers, Compressors, DG Pumps, RO, UF, and Vacuum Pumps Lead and train plant operations team; ensure full compliance with HES standards Manage operation and maintenance of STP, ETP, DM Plant, VPSA Oxygen, PSA Nitrogen systems Conduct RCA for failures and implement corrective and preventive measures Monitor and optimize equipment performance, MTTR, and MTBF Must-Have Qualifications B.E./B.Tech. in Mechanical Engineering or related discipline 12–14 years of experience in Utility/Blast Furnace operations and maintenance Proficiency in handling Water Management Systems, Compressors, DG sets, and Oxygen/Nitrogen plants Expertise in SAP for plant maintenance and material management Proven experience in handling RCA, SOPs, preventive maintenance, and safety policies Strong leadership and team management capabilities Ability to work in high-pressure plant environments, including noise and hazardous zones Preferred Industry Exposure Steel/Heavy Manufacturing/Power Plant/Utility Services Show more Show less

Work Type: Full-time | On-site | Working Hours: Standard plant shift hours Location – Haresamudram, India Compensation (Yearly): ₹1,200,000 – ₹1,500,000 Note: If shortlisted, we’ll contact you via WhatsApp and email. Please monitor both and respond promptly . About The Client We are hiring for a reputed manufacturing plant with a large-scale blast furnace utility setup. The plant focuses on high operational uptime, utility cost optimization, and strict adherence to safety and compliance standards. About The Role We are seeking a Utility Operations Manager with hands-on experience in operating and maintaining Blast Furnace utility systems. The ideal candidate will lead the utility function to ensure an uninterrupted supply of essential resources like water, air, oxygen, and nitrogen to the plant. This role involves leadership of plant staff, adherence to HES norms, and efficient maintenance of critical equipment like blowers, compressors, WTP, DM plants, and more. Key Responsibilities Ensure uninterrupted utility supply (Water, Air, Oxygen, Nitrogen) to blast furnace operations Operate and maintain equipment such as Blowers, Compressors, DG Pumps, RO, UF, and Vacuum Pumps Lead and train plant operations team; ensure full compliance with HES standards Manage operation and maintenance of STP, ETP, DM Plant, VPSA Oxygen, PSA Nitrogen systems Conduct RCA for failures and implement corrective and preventive measures Monitor and optimize equipment performance, MTTR, and MTBF Must-Have Qualifications B.E./B.Tech. in Mechanical Engineering or related discipline 12–14 years of experience in Utility/Blast Furnace operations and maintenance Proficiency in handling Water Management Systems, Compressors, DG sets, and Oxygen/Nitrogen plants Expertise in SAP for plant maintenance and material management Proven experience in handling RCA, SOPs, preventive maintenance, and safety policies Strong leadership and team management capabilities Ability to work in high-pressure plant environments, including noise and hazardous zones Preferred Industry Exposure Steel/Heavy Manufacturing/Power Plant/Utility Services Show more Show less

Work Type: Full-time | On-site | Working Hours: Standard plant shift hours Location – Haresamudram, India Compensation (Yearly): ₹1,200,000 – ₹1,500,000 Note: If shortlisted, we’ll contact you via WhatsApp and email. Please monitor both and respond promptly . About The Client We are hiring for a reputed manufacturing plant with a large-scale blast furnace utility setup. The plant focuses on high operational uptime, utility cost optimization, and strict adherence to safety and compliance standards. About The Role We are seeking a Utility Operations Manager with hands-on experience in operating and maintaining Blast Furnace utility systems. The ideal candidate will lead the utility function to ensure an uninterrupted supply of essential resources like water, air, oxygen, and nitrogen to the plant. This role involves leadership of plant staff, adherence to HES norms, and efficient maintenance of critical equipment like blowers, compressors, WTP, DM plants, and more. Key Responsibilities Ensure uninterrupted utility supply (Water, Air, Oxygen, Nitrogen) to blast furnace operations Operate and maintain equipment such as Blowers, Compressors, DG Pumps, RO, UF, and Vacuum Pumps Lead and train plant operations team; ensure full compliance with HES standards Manage operation and maintenance of STP, ETP, DM Plant, VPSA Oxygen, PSA Nitrogen systems Conduct RCA for failures and implement corrective and preventive measures Monitor and optimize equipment performance, MTTR, and MTBF Must-Have Qualifications B.E./B.Tech. in Mechanical Engineering or related discipline 12–14 years of experience in Utility/Blast Furnace operations and maintenance Proficiency in handling Water Management Systems, Compressors, DG sets, and Oxygen/Nitrogen plants Expertise in SAP for plant maintenance and material management Proven experience in handling RCA, SOPs, preventive maintenance, and safety policies Strong leadership and team management capabilities Ability to work in high-pressure plant environments, including noise and hazardous zones Preferred Industry Exposure Steel/Heavy Manufacturing/Power Plant/Utility Services Show more Show less

Work Type: Full-time | On-site | Working Hours: Standard plant shift hours Location – Haresamudram, India Compensation (Yearly): ₹1,200,000 – ₹1,500,000 Note: If shortlisted, we’ll contact you via WhatsApp and email. Please monitor both and respond promptly . About The Client We are hiring for a reputed manufacturing plant with a large-scale blast furnace utility setup. The plant focuses on high operational uptime, utility cost optimization, and strict adherence to safety and compliance standards. About The Role We are seeking a Utility Operations Manager with hands-on experience in operating and maintaining Blast Furnace utility systems. The ideal candidate will lead the utility function to ensure an uninterrupted supply of essential resources like water, air, oxygen, and nitrogen to the plant. This role involves leadership of plant staff, adherence to HES norms, and efficient maintenance of critical equipment like blowers, compressors, WTP, DM plants, and more. Key Responsibilities Ensure uninterrupted utility supply (Water, Air, Oxygen, Nitrogen) to blast furnace operations Operate and maintain equipment such as Blowers, Compressors, DG Pumps, RO, UF, and Vacuum Pumps Lead and train plant operations team; ensure full compliance with HES standards Manage operation and maintenance of STP, ETP, DM Plant, VPSA Oxygen, PSA Nitrogen systems Conduct RCA for failures and implement corrective and preventive measures Monitor and optimize equipment performance, MTTR, and MTBF Must-Have Qualifications B.E./B.Tech. in Mechanical Engineering or related discipline 12–14 years of experience in Utility/Blast Furnace operations and maintenance Proficiency in handling Water Management Systems, Compressors, DG sets, and Oxygen/Nitrogen plants Expertise in SAP for plant maintenance and material management Proven experience in handling RCA, SOPs, preventive maintenance, and safety policies Strong leadership and team management capabilities Ability to work in high-pressure plant environments, including noise and hazardous zones Preferred Industry Exposure Steel/Heavy Manufacturing/Power Plant/Utility Services Show more Show less

Work Type: Full-time | On-site Location - haresamudram, Andhra Pradesh Working Hours: Shift-based; requires availability during shutdowns/breakdowns Compensation (Yearly): ₹1,700,000 – ₹2,300,000 Note : If shortlisted, we’ll contact you via WhatsApp and email. Please monitor both and respond promptly. About The Client We are hiring for a manufacturing leader specializing in heavy rotary machinery operations and utilities. The company emphasizes safety, uptime, and continuous improvement in plant equipment performance and reliability. About The Role This is a plant-based leadership position responsible for overseeing the operation, maintenance, and troubleshooting of critical rotary equipment such as axial blowers, compressors, and vacuum systems. You will lead shutdown planning, optimize maintenance schedules, drive RCA initiatives, and ensure full compliance with safety and HES standards. Key Responsibilities Ensure adherence to safety regulations and company HES policies Lead and mentor plant operations and maintenance teams Ensure uninterrupted operation of combustion air supply systems Manage rotary equipment like blowers, compressors, driers, and vacuum pumps Drive maintenance optimization (MTTR/MTBF improvements) Lead shutdowns and overhauls with accurate planning and execution Conduct RCA for failures and implement corrective actions Monitor asset performance, schedule preventive and condition-based maintenance Prepare detailed maintenance plans in line with OEM standards Maintain equipment logs, failure history, and SAP-based records Must-Have Qualifications 12–14 years of experience in rotary equipment operations & maintenance Proven expertise in axial/turbo/series blowers, vacuum pumps, compressors Hands-on knowledge of SAP, Process Control Systems Familiarity with shutdown planning, RCA, alignment techniques, and overhauls Strong leadership, troubleshooting, and communication skills Experience working in noisy, high-risk plant environments B.E./B.Tech in Mechanical Engineering or equivalent Nice To Have Experience in large-scale utility operations or blast furnace utility support Exposure to continuous process industries with reliability-focused roles Certification in reliability or safety engineering Show more Show less

Work Type: Full-time | On-site Location - haresamudram, Andhra Pradesh Working Hours: Shift-based; requires availability during shutdowns/breakdowns Compensation (Yearly): ₹1,700,000 – ₹2,300,000 Note : If shortlisted, we’ll contact you via WhatsApp and email. Please monitor both and respond promptly. About The Client We are hiring for a manufacturing leader specializing in heavy rotary machinery operations and utilities. The company emphasizes safety, uptime, and continuous improvement in plant equipment performance and reliability. About The Role This is a plant-based leadership position responsible for overseeing the operation, maintenance, and troubleshooting of critical rotary equipment such as axial blowers, compressors, and vacuum systems. You will lead shutdown planning, optimize maintenance schedules, drive RCA initiatives, and ensure full compliance with safety and HES standards. Key Responsibilities Ensure adherence to safety regulations and company HES policies Lead and mentor plant operations and maintenance teams Ensure uninterrupted operation of combustion air supply systems Manage rotary equipment like blowers, compressors, driers, and vacuum pumps Drive maintenance optimization (MTTR/MTBF improvements) Lead shutdowns and overhauls with accurate planning and execution Conduct RCA for failures and implement corrective actions Monitor asset performance, schedule preventive and condition-based maintenance Prepare detailed maintenance plans in line with OEM standards Maintain equipment logs, failure history, and SAP-based records Must-Have Qualifications 12–14 years of experience in rotary equipment operations & maintenance Proven expertise in axial/turbo/series blowers, vacuum pumps, compressors Hands-on knowledge of SAP, Process Control Systems Familiarity with shutdown planning, RCA, alignment techniques, and overhauls Strong leadership, troubleshooting, and communication skills Experience working in noisy, high-risk plant environments B.E./B.Tech in Mechanical Engineering or equivalent Nice To Have Experience in large-scale utility operations or blast furnace utility support Exposure to continuous process industries with reliability-focused roles Certification in reliability or safety engineering Show more Show less

Work Type: Full-time | On-site Location - haresamudram, Andhra Pradesh Working Hours: Shift-based; requires availability during shutdowns/breakdowns Compensation (Yearly): ₹1,700,000 – ₹2,300,000 Note : If shortlisted, we’ll contact you via WhatsApp and email. Please monitor both and respond promptly. About The Client We are hiring for a manufacturing leader specializing in heavy rotary machinery operations and utilities. The company emphasizes safety, uptime, and continuous improvement in plant equipment performance and reliability. About The Role This is a plant-based leadership position responsible for overseeing the operation, maintenance, and troubleshooting of critical rotary equipment such as axial blowers, compressors, and vacuum systems. You will lead shutdown planning, optimize maintenance schedules, drive RCA initiatives, and ensure full compliance with safety and HES standards. Key Responsibilities Ensure adherence to safety regulations and company HES policies Lead and mentor plant operations and maintenance teams Ensure uninterrupted operation of combustion air supply systems Manage rotary equipment like blowers, compressors, driers, and vacuum pumps Drive maintenance optimization (MTTR/MTBF improvements) Lead shutdowns and overhauls with accurate planning and execution Conduct RCA for failures and implement corrective actions Monitor asset performance, schedule preventive and condition-based maintenance Prepare detailed maintenance plans in line with OEM standards Maintain equipment logs, failure history, and SAP-based records Must-Have Qualifications 12–14 years of experience in rotary equipment operations & maintenance Proven expertise in axial/turbo/series blowers, vacuum pumps, compressors Hands-on knowledge of SAP, Process Control Systems Familiarity with shutdown planning, RCA, alignment techniques, and overhauls Strong leadership, troubleshooting, and communication skills Experience working in noisy, high-risk plant environments B.E./B.Tech in Mechanical Engineering or equivalent Nice To Have Experience in large-scale utility operations or blast furnace utility support Exposure to continuous process industries with reliability-focused roles Certification in reliability or safety engineering Show more Show less

Work Type: Full-time | On-site Location - haresamudram, Andhra Pradesh Working Hours: Shift-based; requires availability during shutdowns/breakdowns Compensation (Yearly): ₹1,700,000 – ₹2,300,000 Note : If shortlisted, we’ll contact you via WhatsApp and email. Please monitor both and respond promptly. About The Client We are hiring for a manufacturing leader specializing in heavy rotary machinery operations and utilities. The company emphasizes safety, uptime, and continuous improvement in plant equipment performance and reliability. About The Role This is a plant-based leadership position responsible for overseeing the operation, maintenance, and troubleshooting of critical rotary equipment such as axial blowers, compressors, and vacuum systems. You will lead shutdown planning, optimize maintenance schedules, drive RCA initiatives, and ensure full compliance with safety and HES standards. Key Responsibilities Ensure adherence to safety regulations and company HES policies Lead and mentor plant operations and maintenance teams Ensure uninterrupted operation of combustion air supply systems Manage rotary equipment like blowers, compressors, driers, and vacuum pumps Drive maintenance optimization (MTTR/MTBF improvements) Lead shutdowns and overhauls with accurate planning and execution Conduct RCA for failures and implement corrective actions Monitor asset performance, schedule preventive and condition-based maintenance Prepare detailed maintenance plans in line with OEM standards Maintain equipment logs, failure history, and SAP-based records Must-Have Qualifications 12–14 years of experience in rotary equipment operations & maintenance Proven expertise in axial/turbo/series blowers, vacuum pumps, compressors Hands-on knowledge of SAP, Process Control Systems Familiarity with shutdown planning, RCA, alignment techniques, and overhauls Strong leadership, troubleshooting, and communication skills Experience working in noisy, high-risk plant environments B.E./B.Tech in Mechanical Engineering or equivalent Nice To Have Experience in large-scale utility operations or blast furnace utility support Exposure to continuous process industries with reliability-focused roles Certification in reliability or safety engineering Show more Show less

Work Type: Full-time | On-site Location - haresamudram, Andhra Pradesh Working Hours: Shift-based; requires availability during shutdowns/breakdowns Compensation (Yearly): ₹1,700,000 – ₹2,300,000 Note : If shortlisted, we’ll contact you via WhatsApp and email. Please monitor both and respond promptly. About The Client We are hiring for a manufacturing leader specializing in heavy rotary machinery operations and utilities. The company emphasizes safety, uptime, and continuous improvement in plant equipment performance and reliability. About The Role This is a plant-based leadership position responsible for overseeing the operation, maintenance, and troubleshooting of critical rotary equipment such as axial blowers, compressors, and vacuum systems. You will lead shutdown planning, optimize maintenance schedules, drive RCA initiatives, and ensure full compliance with safety and HES standards. Key Responsibilities Ensure adherence to safety regulations and company HES policies Lead and mentor plant operations and maintenance teams Ensure uninterrupted operation of combustion air supply systems Manage rotary equipment like blowers, compressors, driers, and vacuum pumps Drive maintenance optimization (MTTR/MTBF improvements) Lead shutdowns and overhauls with accurate planning and execution Conduct RCA for failures and implement corrective actions Monitor asset performance, schedule preventive and condition-based maintenance Prepare detailed maintenance plans in line with OEM standards Maintain equipment logs, failure history, and SAP-based records Must-Have Qualifications 12–14 years of experience in rotary equipment operations & maintenance Proven expertise in axial/turbo/series blowers, vacuum pumps, compressors Hands-on knowledge of SAP, Process Control Systems Familiarity with shutdown planning, RCA, alignment techniques, and overhauls Strong leadership, troubleshooting, and communication skills Experience working in noisy, high-risk plant environments B.E./B.Tech in Mechanical Engineering or equivalent Nice To Have Experience in large-scale utility operations or blast furnace utility support Exposure to continuous process industries with reliability-focused roles Certification in reliability or safety engineering Show more Show less

Work Type: Full-time | On-site Location - haresamudram, Andhra Pradesh Working Hours: Shift-based; requires availability during shutdowns/breakdowns Compensation (Yearly): ₹1,700,000 – ₹2,300,000 Note : If shortlisted, we’ll contact you via WhatsApp and email. Please monitor both and respond promptly. About The Client We are hiring for a manufacturing leader specializing in heavy rotary machinery operations and utilities. The company emphasizes safety, uptime, and continuous improvement in plant equipment performance and reliability. About The Role This is a plant-based leadership position responsible for overseeing the operation, maintenance, and troubleshooting of critical rotary equipment such as axial blowers, compressors, and vacuum systems. You will lead shutdown planning, optimize maintenance schedules, drive RCA initiatives, and ensure full compliance with safety and HES standards. Key Responsibilities Ensure adherence to safety regulations and company HES policies Lead and mentor plant operations and maintenance teams Ensure uninterrupted operation of combustion air supply systems Manage rotary equipment like blowers, compressors, driers, and vacuum pumps Drive maintenance optimization (MTTR/MTBF improvements) Lead shutdowns and overhauls with accurate planning and execution Conduct RCA for failures and implement corrective actions Monitor asset performance, schedule preventive and condition-based maintenance Prepare detailed maintenance plans in line with OEM standards Maintain equipment logs, failure history, and SAP-based records Must-Have Qualifications 12–14 years of experience in rotary equipment operations & maintenance Proven expertise in axial/turbo/series blowers, vacuum pumps, compressors Hands-on knowledge of SAP, Process Control Systems Familiarity with shutdown planning, RCA, alignment techniques, and overhauls Strong leadership, troubleshooting, and communication skills Experience working in noisy, high-risk plant environments B.E./B.Tech in Mechanical Engineering or equivalent Nice To Have Experience in large-scale utility operations or blast furnace utility support Exposure to continuous process industries with reliability-focused roles Certification in reliability or safety engineering Show more Show less

About Company: Ideametrics Pvt. Ltd. is a leading engineering design and simulation solutions provider company in India. Serving various sectors including oil & gas, power, food & pharmaceuticals, and chemical, the firm has gained a reputation of being one of the most trusted and reliable partners for engineering design solutions. Website: www.ideametrics.co.in Position Category: Engineering Design Role: Structural Design Engineer Functional Area: Engineering Design Qualification: BE/BTech/ ME/MTech Mechanical or Civil Structural or related Engineering with a certified course in Staad Pro Desired Industrial Background Experience: Oil and Gas / Energy / Power / Infrastructure / Food / Pharma 0 to 3 years of experience in relevant technology Technical Skills required: Expert-level knowledge on the use of Staad Pro, Strong knowledge of more than one relevant Mechanical industry code/standards (e.g., IS, AISC, etc.) related to structural design. Exposure to the design of structures for refinery/petrochemicals/food/pharma or power plants is required. Should have sound fundamentals in structural steel engineering. Special Skills required: Experienced user of computer programs like MS Office. Should be a team player with a proactive approach. Should have good communication and leadership skills. Should be able to work under pressure and manage deliveries on time. Should be able to work for an extended time to ensure timely deliveries Role and Responsibilities: Study and interpret Basic Engineering Design Documents (BEDD), project specifications, and P&IDs to extract necessary structural design inputs. Perform structural analysis and design of supporting structures for static equipment such as pressure vessels, heat exchangers, storage tanks, columns, and reactors. Design and validate equipment foundations, saddle supports, platforms, access structures, pipe racks, and other structural systems. Ensure design adequacy for various load conditions, including dead load, live load, wind, seismic, thermal, blast, and equipment operating loads. Evaluate nozzle loads, equipment center-of-gravity, and operating weight to ensure structural adequacy and stability. Perform and review engineering calculations, structural stress analysis, and develop detailed reports/documentation. Check and review structural design drawings and documents prepared by CAD teams. Coordinate and review equivalent 3D models to ensure design compliance and clash-free integration with other disciplines. Perform code checks using relevant national and international standards (IS, AISC, API, ASCE, etc.). Conduct feasibility checks and resolve design inconsistencies or client comments through value engineering. Participate in internal and client design reviews, providing technical justifications and support. Collaborate with mechanical, piping, civil, and process teams to ensure seamless integration of structural systems with overall plant layout. Maintain proper documentation of all calculations, design iterations, and revisions for project traceability and audits. Adhere to project timelines, quality standards, and HSE requirements during all design phases. Salary: No Bar for the right candidate Job Location: Work from Office - Kolhapur, Maharashtra, India. Work Shift: Day Shift Show more Show less

🚨 We’re Hiring! | Head – Mechanical (Blast Furnace) | Steel Manufacturing Industry 📍 Location: Hazira, Surat 📅 Experience: B.E/B.Tech: 20+ years / Diploma: 25+ years (Only candidates with extensive experience in similar projects and Operations & Maintenance will be considered.) 🔧 Job Purpose: We’re looking for a seasoned Mechanical Head to lead our Blast Furnace mechanical operations. This critical role ensures the continuous, efficient operation and maintenance of mechanical systems to meet business objectives and maximize plant availability and worked on BF - 4000 cubic meter. Key Responsibilities: Lead the mechanical maintenance team and oversee smooth equipment functioning Plan and source maintenance activities aligned with business goals Develop preventive maintenance frameworks for static and dynamic equipment Optimize operation costs while ensuring high system availability Liaise with external agencies and cross-functional teams for seamless coordination Ensure regular compliance with safety standards and best practices Map operational strategies to maintain equipment stability Drive SOP implementation for routine, shutdown, and emergency operations ✅ Functional Expertise Required: Deep technical knowledge of mechanical systems in: Blast Furnace Proper Cast House SGP Stock House Hot Blast System Utilities Proven experience in both project execution and Operations & Maintenance (O&M) Strong leadership, problem-solving, and team management capabilities 📩 Apply Now! Send your resume to [anita.jhankar@taggd.in] Help us shape the future of steel manufacturing! Show more Show less

We need Refractory Site Supervisor And Mechanical Site Supervisor with below experience with Minimum 8 Years Experience: Refractory Site Supervisor we need below experience; 1] Candidates having experience in Integrated Steel Plants with specific exposure in Coke Ovens, Blast Furnace, Reheating Furnace Refractory Installation and Maintenance works. 2] Able to read drawings, specifications and understand Installation procedures 3] Good Communication with Client, Company employees and workers, oral and email communication preferred 4] Overall control of workers and Schedule implementation to meet target objectives with Quality &Safety. 5] To strictly follow all Safety practices and ensure Compliance of all protocols for workers working at Site. 6] Allocate daily tasks to workers, helpers, and skilled masons based on work-front availability 7] Ensure availability of materials, tools, and equipment on-site 8] Enforce the use of PPE and ensure adherence to job safety measures 9] Supervise the job 10] Coordinate with QC engineers for inspections, measurements, and thickness verification 11] Attend to punch list clearance, repairs, or touch-ups after inspection 12] Time management in tight schedules (especially in shutdown jobs) Mechanical Site Supervisor we need below experience; 1] Candidates having experience in Integrated Steel Plants with specific exposure in Mechanical Fabrication & Erection, Mechanical Maintenance and O&M at Coke Ovens, Blast Furnace, Pellet plant, Reheating Furnace 2] Able to read drawings, specifications and understand Installation procedures 3] Good Communication with Client, Company employees and workers, oral and email communication preferred 4] Overall control of workers and Schedule implementation to meet target objectives with Quality &Safety. 5] To strictly follow all Safety practices and ensure Compliance of all protocols for workers working at Site. 6] Allocate daily tasks to workers, helpers, and skilled workmen based on work-front availability 7] Ensure availability of materials, tools, and equipment on-site 8] Enforce the use of PPE and ensure adherence to job safety measures 9] Supervise installation, alignment, and erection 10] Ensure correct usage of lifting equipment, tools, and instruments. 11] Coordinate with QC engineers for inspections, measurements 12] Attend to punch list clearance, repairs, or touch-ups after inspection 13] Time management in tight schedules (especially in shutdown jobs)