66 Omron Jobs - Page 2

Job description This position is responsible to understand, develop, and handle Project Design activities using HMI, SCADA for the systems, ensure & resolve customer complaints in line with Company standards. RESPONSIBILITIES: Understand, plan and carry out Project Design and development activities using HMI, SCADA for Machinery/Systems to lead the projects assigned by the superior. Adhere to the Project development plans and schedules as agreed and committed with superior. Execute Project design well within the set target cost and development budget. Understand the problems in the Systems pertaining to Project design and coordinate with cross-functional teams for proactive solutions. Coordinate and support service department in effectively resolving customer complaints pertaining to Mechanical Design issues. Adhere strictly to the QMS standards Skills & Experience: Education Qualification: BE (Electrical & Electronics) PLC programming hands on experience PLCs like AB, Mitsubishi, GE, Siemens, Omron or any reputed platform Hands on experience on HMI, SCADA, VFD parameter setting, Eurytherm PID controller. Able to understand existing logic, trouble shooting and development of new logic. Exposure to interface with third party devices on network like RS232, 485 or Ethernet or any protocols like Profinet, Profibus, Ethercat Able to understand flow diagram, Architecture diagram, Circuit diagram and preparation of program. Should be committed to project timeline. Programming using PLC like AB , Siemens, Omron and Mitsubishi learning is mandatory other PLC will be value added . Back-up handling and storing after project completion.

Job Summary: We are seeking a skilled and proactive Service Engineer with 3+ years of hands-on experience in Industrial Automation . The ideal candidate should have worked with leading automation brands such as Siemens, Omron, ABB , etc., and possess strong knowledge of automation products, application programming , and commissioning support . Exposure to platforms like Omron Sysmac and similar environments is highly desirable. Key Responsibilities: Provide on-site and remote technical support , troubleshooting, and service for automation products and systems. Configure, program, and commission industrial automation equipment (PLC, HMI, SCADA, Drives, Sensors). Develop and maintain application programs using platforms like Omron Sysmac Studio, Siemens TIA Portal, ABB Automation Builder , etc. Collaborate with the sales and engineering team to support pre-sales technical evaluations and post-sales implementations . Conduct product demos, training, and application trials for clients. Maintain detailed documentation of service reports, project configurations, and troubleshooting logs. Requirements: 3 to 7 years of relevant experience in industrial automation and service engineering . Hands-on exposure to Siemens, Omron, ABB , or similar automation brands. Strong programming experience in Sysmac Studio, TIA Portal, Step 7, Automation Studio , or equivalent. Good understanding of control panel wiring, I/O mapping, field devices , and industrial protocols like EtherCAT, Modbus, Profibus . Willingness to travel for site support and commissioning . Excellent problem-solving, customer service, and communication skills. Preferred Qualifications: Diploma or Bachelors Degree in Electrical, Electronics, Instrumentation, or Mechatronics Engineering . Certification in PLC/SCADA/Drives from recognized institutions. Experience in pharmaceutical, packaging, automotive , or FMCG automation applications

Role & responsibilities 1. Responsible for day to day maintenance activities and taking action 2. Performing preventive maintenance 3. Managing the technician and assigning the day to day activities 4. Co coordinating with Cross functional team in terms of New project and other supporting activities 5. Implementing TPM activities 6. Analyzing day to day breakdowns and taking action 7. Interacting with Cross functional team 8. Monitoring and reviewing the critical spares and procuring 9. Improving MTBF and MTTR 10. Achieving Zero breakdown 11. Improving machine uptime and efficiency Supporting to achieve Production plan Vs actual 100% 12. Planning and executing PM activities 13. Troubleshooting breakdown activities and taking action 14. Controlling maintenance tools, stores and equipment; 15. Monitoring and controlling maintenance costs; 16. Responsible to have an accountability of their respective production line. 17. Responsible for the quality of the deliverable. 18. Develop methodologies/best practices to improve the efficiency of the machine as well as of the team. 19. Ability to handle a team of technicians 20. Updation of maintenance documents 21. Implementation of TPM activities 22. Involving internal and external customer audits 23. Co-ordinating with supplier and performing the instruments calibration Functional Competencies 1. Must have knowledge in automation products 2. Preferrable Omron CJ2B series, EIP21 Ethernet Modules Interfacing, CJ1W Analog Modules, CJ1W Position Control units, CX programmer 3. Must have knowledge in Mitsubishi Servo system MR-J4 series, MR Configurator, Proface HMI, GP4000 series, GP Pro Software. 4. Preferred to have Programming knowledge in Siemens 5. Must have knowledge in Breakdown, PM activities, PDM activities 6. Must have knowledge of any kind of traceability system 7. Knowledge of MS Office, MS SQL, Desktop Application will be a plus 8. Capability to quickly identify and resolve program bugs 9. Capability to prepare the BOM for the project requirements 10. Manpower planning for the project work Strong interpersonal skills Previous Experience 1. Must have maintenance background and should have strong analytical, programming skills 2. Must have been independently executed and programmed automation/digitalization projects 3. Must have been resolved the critical breakdowns related to IPC/PLC/Servo systems independently 4. Must have been done spare planning and procurement activities 5. Must have been coordinated with technical support team/manufacturers to resolve the issues which need additional support Preferred to have worked for mechanical trouble shooting of machines Preferred candidate profile 1. Ready to relocate within 4 to 5 km distance. 2. Work in shifts and Holidays 3. 6 days working with staggered weekly off Should have hands on experience to operate MSCIT and computer knowledge Languages English, Hindi Marathi Education Diploma/B. Tech. in Electrical & Electronics with 4+ experience

Looking for skilled and proactive Service Engineer with 4-8 years of experience in Industrial Automation . Worked with leading automation brands such as Siemens, Omron, ABB , and possess strong knowledge of automation products, application programming. Health insurance Annual bonus

Hiring PLC Programmer Software Required - Siemens , Delta , Mitsubishi , Omron , ABB Qualification : B.E / Dip - EEE, ECE Salary up to 4LPA Immediate Joiners can apply for this role Share you Resume - omkarstaffing98@gmail.com

1.PLC system (Beckhoff /MITSUBISHI /OMRON) / Drives (Servo/Stepper) 2.Troubleshooting and modification in program as per the requirement in machine 3.Troubleshooting of mechanical and electrical problems

Assembly Shop, Body Shop, Welding (Spot & CO), Conveyor Lines •VFDs, HMIs, EOT & US Cranes, Oil Filling Systems, Dent Pullers Benefits : PF, Medical Insurance, Variable Pay, Gratuity & More Languages Known: Tamil mandatory Required Candidate profile Preventive & Breakdown Maintenance, EMS, VIN Marking, Chassis Handling PLC Knowledge (Mandatory): Allen Bradley | Siemens | Omron | Mitsubishi Languages Known: Tamil mandatory

Developing PLC,HMI/SCADA software 4 customer orders, set protocols SOPs. Develop new blocks, libraries in PLC, software development in HMI/SCADA. Troubleshooting testing at customer site during service, commissioning, Product execution co-ordination.

| Job Description: Position : PLC Programmer (Mitsubishi) Location : IMT Manesar Experience : 2-10 year Salary : Negotiable Industry : Automation/ Manufacturing Qualification : BE/B.Tech (Electrical) or Diploma (Electrical) Roles & Responsibilities: Well-versed knowledge of PLC, HMI and Servo motor programming like Mitsubishi (a must),Omron Experience on different communication protocols like RS232C, RS485, CC links, EtherCAT, Ethernet etc. Well versed knowledge of Electrical equipment selection as per System Requirement Key Skills/Abilities: Team-oriented and good communication skills, in terms of project handover Individual handling of project in programming perspective Should have hands on experience in SPM automation and Machine / Product development and machine building Experience in Robot based automation projects will be preferred. Should have experience in finding fault & troubleshooting in system Mail updated resume with current salary- Key Skill: Mitsubishi programmer, PLC programmer, Automation, SPM automation, Mitsubishi PLC Programming,

Appville Softwares is looking for PLC Programmer to join our dynamic team and embark on a rewarding career journey Develop and troubleshoot PLC-based control systems. Write ladder logic and configure HMI/SCADA interfaces. Test programs on machinery and ensure automation reliability. Document system architecture and changes.

Accountability : Timely Completion of Cost effective Engineering Drawing. Enhanced Quality. Role & responsibilities a. Design the Machine / System as per the customer's input. b. Calculations & selection of bought out items such as guideways, bearings, ball screws, etc. c. To attain the project kickoff meeting ; accordingly understand the job d. To create 3D model , detailed drawings & preparation of SAP BOM e. To prepare the documents such as VTOP documentation & operation manual

Responsibilities: 1. PLC programming for automation projects 2. Building control system with PLC 3. Wiring diagram of PLC control panel Key skills & pre-requisites 1. PLC programming Mitsubishi / Delta

strong problem-solving ability, effective communication skills, and expertise in programmable logic controllers (PLCs) Role involves rapid response to issues, troubleshooting on-site problems, & collaborating with internal & external stakeholders Provident fund Annual bonus Travel allowance Employee state insurance Performance bonus Referral bonus

Develop, modify, and troubleshoot PLC programs ,Design and implement HMI/SCADA systems .Collaborate with cross-functional teams to integrate automation systems. Troubleshoot and maintain existing automation, technical support during installation, Required Candidate profile B.TECH in Electrical (Electronics, Mechatronics) Minimum 5 years of experience in industrial automation and PLC programming. Strong expertise in PLC systems like industrial communication protocols.

Urgent hiring for the PLC Programmer profile for the Pune/Mohali location Designation -PLC Programmer Salary - Up to 50k PM Experience- 3+ Years Location - Pune/Mohali Gender- Male You will be responsible to- To write the complete program of Industrial Controller like ( Schneider PLC, HMI, Servo, SCADA, VFD, Control Panel and other controllers). Responsible to handle given programming task while co ordinating with Project Manager. Develop the program while conducting the electrical troubleshooting of Industrial controller, Control Panel, Wiring, etc Work in a team and independently to troubleshoot real time programming errors in the ladder logic. On-site support includes Program Execution, Electrical installation, Guidanceto customer & online commissioning, Project execution (mainly based on Pro-face, Delta, Omron, Mitsubishi, Siemens) &verification of process. Ensure the Customer Satisfaction. Respond quickly to customer calls. Qualification - Graduates / Diploma from Btech/BE with recognised universities. Knowledge and Skills: Excellent automaton skills and deep understanding level about project requirement. Capable to work on Project Integration of PLC, HMI, SCADA, Servo, VFD Machine Vision, Panel commissioning and Testing, 5 Years and above work experience with any recommended PLC, HMI, SCADA, Servo and system Integration. Good prioritizing and planning skill. #JobOpening #Hiring #JobSearch #NowHiring #CareerOpportunity #Employment #JobOpportunity #JobListing #JobPosting #JobAlert #recruitment If interested can forward your updated resumes on hr6@tasolutions.in and can directly contact us on 9041287949 also can provide our reference to your friends and colleagues.

Hiring PLC Programmer with 23 years experience. Must have hands-on skills in Mitsubishi, Delta, Siemens PLCs, ladder logic, HMI, panel wiring, troubleshooting & SPM automation. Strong understanding of control systems and field support required.

Responsibilities: * Design, program, test & maintain PLC systems using Mitsubishi, Omron & Delta brands. * Develop servo programs & wiring diagrams for special purpose machines. * Collaborate with cross-functional teams on project implementation. Annual bonus

Role & responsibilities Key Responsibilities: Ensure the production equipment is available for full production. Troubleshooting knowledge in Electrical and Electronic circuits, Sensors, VFD, PLC, HMI, Vision system. Diagnoses and resolves equipment malfunctions, performs repairs. Daily down time analysis for root cause identification by Why- Why and TPM tools. Regularly inspects equipment to identify potential problems, performs routine maintenance .tasks, and assists with scheduled maintenance activities Monitoring the MTTR, MTBF and machine uptime, control the setup scrape Support to the process team to reduce the inprocess scrap Check the life of the pneumatic and hydraulic system and plan for change Plan and execute the preventive maintenance effectively and close the observation within the time period Plan & execute the predictive maintenance based on the machine manual and failure Plan for New project implementation, Design change Responsible for the daily break down maintenance, trouble shooting. Preventive maintenance planning and update the preventive maintenance check sheet. PLC programming modification, (Omron, Siemens, Keyence,) HMI Program & LabVIEW Programming Servo drive/Motor and stepper drive / Motor maintenance and tuning Electric and electronic Troubleshooting Vision system Tuning, installation (Keyence, Omron, Wenglor, Cognex). Knowledge in Photo Electric sensors, Proximity sensors. Requirements: Qualification : Diploma or BE in Mechanical / Mechatronics / Electrical / Electronics, relevant experience at Semi / Fully automated assembly lines in Auto component Industries, preferably in motor manufacturing Industry. Skills : Good Knowledge in PLC, HMI, VFD, Vision System, Jig and Fixtures Strong ability to work under pressure, flexible, reliable, team player Effective communication and good analysis skills Good trouble shooting knowledge in Electrical, Hydraulic and Pneumatic Circuits Good knowledge of Pneumatic and Hydraulic, Gears, Fixtures

Roles & Responsibilities PLC Platforms: Experience in programming and configuring leading industrial PLC brands (Mitsubishi, Siemens, Omron, Allen-Bradley) PLC Languages: Proficient in IEC-standard PLC programming languages for flexible automation (Ladder Logic, Structured Text, Function Block). HMI Design: Skilled in designing operator-friendly HMI interfaces for process control. VFD & Servo Drives: Able to integrate and tune drives for precise motion and speed control. Communication Protocols: Knowledge of industrial communication for device interoperability (Modbus TCP/IP, Ethernet/IP, RS485, RS232, Profinet). SCADA Systems: Good to have exposure to SCADA platforms for monitoring, data logging, and alarms. Robot Teaching: Good to have basic knowledge of robotic programming and path teaching. Laser Instruments & Vision Systems: Good to have familiarity with laser measurement and vision systems for inspection and alignment. PLC Panel Wiring Understanding: Good to have basic understanding of control panel layouts and wiring for troubleshooting. Required Skill Set : OMRON PLC, MITSUBISHI PLC, SIEMENS PLC, LADDER LOGIC, HMI PROGRAMMING, STRUCTURED TEXT, SERVO DRIVES, MODBUS PROTOCOL, PLC PROGRAMMING

Hiring For PLC Programmer Course Completed candidates can apply for this role. Software Knowledge is must (siemens , Omron , Delta ,Mitsubishi) Immediate joiners call this number : 8608144888 Share your cv to this number

* Programing of MITSUBISHI Product like: PLC/HMI/SERVO/SCADA/VFD * Client Visit for Installation & Commissioning * Respond to Customer Calls & Ensure Satisfaction * Team Handling & Reporting * Conducting Technical Session of BOM Selection, Trainings Required Candidate profile Hands on Experiance of: - PLC, HMI, SCADA, SERVO, VFD, Industrial Networks, Panel FAT, Testing & Commissioning of Mitsubishi - Preparing Manuals & Reports - Complete the Work in Prescribed Time

Job Summary: The Electrician - Level II performs preventive and corrective electrical maintenance, troubleshooting, and support to ensure the availability, reliability, and safe operation of equipment in a manufacturing environment. This role requires working independently with limited supervision, selecting and using appropriate tools and technology. The Electrician contributes to continuous improvement, ensures compliance with safety protocols, and provides electrical expertise across various machines, systems, and plant automation infrastructure. Key Responsibilities: Health, Safety & Environmental (HSE): Follow Cummins safety standards, use PPE, and ensure safe work practices including LOTO, work permits, and risk assessments. Immediately report hazards, incidents, and unsafe conditions; take corrective action where possible. Support a proactive, interdependent safety culture through participation in HSE training and audits. Maintain compliance with environmental practices and help reduce the environmental footprint of maintenance activities. Electrical Maintenance & System Support: Perform preventive, corrective, and emergency electrical maintenance on manufacturing equipment (CNCs, SPMs, test cells, etc.). Troubleshoot and repair electrical control systems using schematics, meters, and diagnostic tools. Install, configure, and maintain automation systems including PLCs, SCADA, HMIs, and drives. Implement and maintain safety systems and interfacing equipment to ensure machine and personnel protection. Support machine shop breakdowns and ensure downtime reduction through effective troubleshooting and spare management. Maintain updated records for breakdowns, history, analysis, and work orders in systems like Maximo. Automation and Controls: Execute programming and configuration tasks using PLC tools such as Siemens TIA Portal, Mitsubishi GX Developer, RS Logix, and others. Work with control networks and communication protocols like Ethernet/IP, Device Net, Profibus, and CC-Link. Develop and implement bench tests, machine logic changes, and control system improvements. Utilize sensor and scanner technologies (e.g., Cognex, IFM) for measurement, quality assurance, and feedback integration. Continuous Improvement & TPM: Support TPM activities and participate in kaizens, quality circles, and CI initiatives. Monitor and implement improvements to boost machine uptime and reduce electrical faults. Contribute to reducing quality defects and improving energy efficiency through system optimization. Team Collaboration & Communication: Communicate effectively with operations, maintenance, and engineering teams to coordinate activities. Guide and mentor ITI/DET trainees and ensure discipline and development within the team. Provide timely updates to supervisors on task progress, system issues, or project milestones. Skills & Technical Knowledge: PLC Programming: Siemens TIA Portal, SIMATIC Step 7, Mitsubishi GX Developer, RS Logix 500. SCADA & MES: Ignition SCADA, SQL, Manufacturing Execution Systems. HMI/Automation: Allen Bradley, Fanuc, Omron, GOT, Zenon. Sensors/Instrumentation: Cognex, IFM, Leuze scanners and sensor studio tools. Communication Protocols: Ethernet/IP, Profibus, Profinet, RS232, Device Net. Electrical Systems: Installation, testing, troubleshooting, and preventive maintenance. Variable Frequency Drives (VFDs): Siemens G120, Mitsubishi. Schematics & Drawings: Proficient in reading and interpreting electrical documents. Safety: LOTO, machine guarding, and risk assessment practices. Experience Requirements: Required: 5-10 years of experience in electrical and electronics maintenance in manufacturing. Preferred: Experience with CNC/assembly/test cell equipment and system-level troubleshooting. Advantages: Knowledge of TPM, 5S, Kaizen, root cause analysis, and automation system integration. Additional Responsibilities: Maintain and improve 5S and TPM scores in assigned areas. Ensure compliance with safety and discipline norms by the maintenance team. Support new machine installation, commissioning, and process interfacing. Monitor and control day-to-day plant issues and machine safety measures. Provide timely updates on maintenance KPIs and project feedback to leadership. Competencies: Collaborates: Builds strong relationships and supports team goals. Communicates Effectively: Delivers clear, audience-appropriate information. Customer Focus: Understands internal customer needs and meets expectations. Decision Quality: Makes informed and timely maintenance decisions. Drives Results: Delivers consistently under pressure and against tight deadlines. Nimble Learning: Quickly adapts to new tools, systems, and technologies. Health and Safety Fundamentals: Models safe behavior and reinforces safety culture. Electrical System Troubleshooting: Resolves electrical issues using diagnostics and root cause analysis. Controls Engineering Knowledge: Applies advanced knowledge of automation, programming, and sensor integration. Controls Safety: Ensures machines comply with safety regulations and best practices. Factory Automation and Control Systems: Contributes to automation upgrades and system enhancements. Manufacturing Knowledge: Applies practical knowledge of electrical systems in industrial environments. Values Differences: Respects and leverages diverse perspectives within teams. Education, Licenses, Certifications: Required: High school diploma or secondary education equivalent. Preferred: Diploma in Electronics or Controls Engineering. Compliance: May require export control or regulatory licensing based on project requirements.

# PLC (Seimens/Fanuc) # Plant Equipment Maintenance # Robot Maintenance

Dear Candidate, We are hiring a Machine Vision Engineer to develop vision-based inspection, object detection, and automation systems. Great for engineers skilled in image processing and deep learning. Key Responsibilities: Design vision systems for defect detection, OCR, and tracking Develop image processing algorithms using OpenCV or MATLAB Integrate vision hardware with robotic systems and automation platforms Apply deep learning techniques for object recognition and classification Required Skills & Qualifications: Proficiency in C++, Python, and vision libraries (OpenCV, Halcon) Experience with camera calibration, lighting, and lens systems Knowledge of ML/DL frameworks (TensorFlow, PyTorch) Bonus: Experience with industrial cameras and automation protocols Note: If interested, please share your updated resume and preferred time for a discussion. If shortlisted, our HR team will contact you. Kandi Srinivasa Reddy Delivery Manager Integra Technologies

Purpose of the role- The PLC Manager is responsible for overseeing the design, development, and implementation of programmable logic controller (PLC) systems to optimize manufacturing processes. Reporting to the Operations Head, this role involves collaborating with cross-functional teams to ensure efficient production, troubleshooting PLC issues, and continuously improving automation systems to enhance productivity and quality. The PLC Manager will also be responsible for training and mentoring team members on PLC programming and maintenance. Role & responsibilities - Develop and implement strategies for the effective use of Programmable Logic Controllers (PLCs) in the company's manufacturing processes. Oversee the installation, programming, and maintenance of PLC systems across multiple production lines. Collaborate with cross-functional teams to identify automation opportunities and develop solutions using PLC technology. Ensure compliance with industry standards and regulations related to PLC programming and safety. Train and mentor technicians and engineers on PLC programming and troubleshooting techniques. Monitor and analyse PLC performance data to identify areas for improvement and optimize system efficiency. Troubleshoot and resolve PLC-related issues, including hardware and software malfunctions. Coordinate with vendors and suppliers to procure necessary PLC equipment and components. Develop and maintain documentation, including PLC programs, wiring diagrams, and operating procedures. Stay updated with the latest advancements in PLC technology and recommend upgrades or modifications to existing systems as needed. Required Skills and Experience- Well versed knowledge of PLC, HMI and Servo motor programming like Mitsubishi (a must),Omron, Schneider. Strong knowledge of Beckhoff, Siemens TIA portal, hands-on experience on Siemens S7-1500 series PLC and Siemens IPC programming, SCADA systems, HMI interfaces, Instrumentation and control systems. Complete knowledge of various make VFDs including ABB and Danfoss, Yaskawa, FANUC, EPSON, Siemens. Experience with implementing various communication protocols - Profinet, Modbus TCP/IP, OPC, RS232C, RS485, CC links, EtherCAT , EtherCAT, Ethernet, Unit and bulk handling systems,Weighing & Batching Systems, EPCM, IOT 4.0, Panels, Special Purpose Machines (SPM). Experience in turnkey robot-based automation systems for Machine shop, Pick & Place Systems with Conveyors, Robot based Automation, Robot based vision application/ Vision based inspection, Traceability, OEE, Environment monitoring, Pick to Light Material Handling, Data Logging and Digitization, Quality & compliance in production, Supply chain management, Predictive maintenance, Smart energy management, Warehouse management. Project Management which includes Concept Development, Mechanical Design, Assembly, Integration, Commissioning and Training & Service. Candidate Qualification and Experience- Qualification: BE/B.Tech(Electrical) or Diploma(Electrical) Experience : Minimum 10 years and above