1218 Quality Engineering Jobs - Page 41

The Quality Control Inspector receives his/her assignments and missions from the local operation manager/team manager. The overall mission scope will cover the below: Report any kinds of unethical behaviors observed, either internally from colleagues or externally from the agent/supplier/factory staffs. Understand the Assurance Control Book (ACB), plans, instructions, and specifications to understand customers requirements. Familiar with the product production processes, quality standards and common defects classification. Ensure that the production information is accurate, and conduct quality inspection on the goods as required. Inspect the goods according to the different requirements of customers and issue a good quality report without mistakes or missing information. Complete before the deadline all the assigned courses, training and assessment as required. For Inline inspection Production Assurance (INPA) and Quality Assurance (QA) / Quality Control (QC) servicesthe Quality Control Inspector must be able to analyze the detected quality problems, put forward improvement measures, track and feedback, and avoid the recurrence of nonconformities; and resolve quality-related issues in a timely manner. Other relevant responsibilities assigned by the management During the inspection, the following shall be checked: Use technical documents and samples verified by customers to prove product conformity Measurement method following the customers specifications and methods. Perform the requested onsite tests, according to Eurofins Standard protocol or customers specifications. Strictly comply with the customers requirements mentioned in the ACB or other specifications. Take clear photos as required. Redact the inspection report based on the confirmed template. Submit the complete inspection report on the same day of the inspection. Qualifications The Quality Control Inspector should have 2 to 5 years experience in an inspection or auditing company and approved/qualified on conducting product random inspection according to ISO 2859 standard. He/she should have related qualification certificates in soft line/ hardline or E&E field. Good written English is required. He/she should also have good communication skill with factories and demonstrate below qualities: Integrity Responsible Careful on details Rigorous Disciplined Additional Information Good written and verbal communication skills Operational Excellence and demonstrated ability to deliver results in multiple challenging situations. Team-focused with the ability to achieve or exceed objectives while working collaboratively with other team members to achieve mutual success. Good at Presentations High leadership and supervisory skills Result oriented Problem solving Good at Retention

Familiar with the product production processes, quality standards and common defects classification. Ensure that the production information is accurate, and conduct quality inspection on the goods as required. Inspect the goods according to the different requirements of customers and issue a good quality report without mistakes or missing information. Complete before the deadline all the assigned courses, training and assessment as required. For Inline inspection Production Assurance (INPA) and Quality Assurance (QA) / Quality Control (QC) servicesthe Quality Control Inspector must be able to analyze the detected quality problems, put forward improvement measures, track and feedback, and avoid the recurrence of nonconformities; and resolve quality-related issues in a timely mannerReport any kinds of unethical behaviors observed, either internally from colleagues or externally from the agent/supplier/factory staffs. Understand the Assurance Control Book (ACB), plans, instructions, and specifications to understand customers requirements Additional Information The Quality Control Inspector is a key position in Eurofins CPA. He/she is responsible to perform the product inspection services according to Eurofins CPA processes and instructions, which are based on ISO 2859 standard. The Quality Control Inspector is responsible to redact the inspection report and provide all information required are sent on time with high quality. The Quality Control Inspector is responsible to submit the complete inspection report without mistakes, on the same day of the inspection completion.

Position Overview: The End-to-End Testing Lead will be responsible for overseeing the entire testing process for Surest and USP integrations. This role involves managing the testing strategy, planning, execution, and reporting to ensure seamless integration and functionality across all project components. The ideal candidate will have extensive experience in end-to-end testing, particularly with Surest and USP systems, and will be adept at coordinating with various teams to achieve project goals. Primary Responsibilities: Testing Strategy and Planning: Develop and implement comprehensive end-to-end testing strategies for Surest and USP integrations Collaborate with project managers, business leads, and IT teams to define testing scope, objectives, and timelines Ensure alignment of testing activities with project requirements and timelines Test Execution and Management: Coordinate with cross-functional teams to ensure all interfaces and integrations are thoroughly tested Issue Resolution and Reporting: Identify, document, and track defects and issues throughout the testing lifecycle Provide regular updates on testing progress, issues, and risks to stakeholders Work with development teams to ensure timely resolution of defects and retesting Team Leadership and Coordination: Lead and mentor a team of testers, providing guidance and support to ensure high-quality testing Comply with the terms and conditions of the employment contract, company policies and procedures, and any and all directives (such as, but not limited to, transfer and/or re-assignment to different work locations, change in teams and/or work shifts, policies in regards to flexibility of work benefits and/or work environment, alternative work arrangements, and other decisions that may arise due to the changing business environment). The Company may adopt, vary or rescind these policies and directives in its absolute discretion and without any limitation (implied or otherwise) on its ability to do so Required Qualifications: Undergraduate degree or equivalent experience Experience with Kafka streaming, API and integration testing Experience in end-to-end testing, particularly with Surest and USP systems would be a plus Solid background in managing testing projects and leading testing teams Familiarity with claims adjudication and payment processes Knowledge of various testing phases, including case install, enrollment, billing, and commissions Effective communication to share project progress and risks in different project meetings and sending out the status reports At UnitedHealth Group, our mission is to help people live healthier lives and make the health system work better for everyone. We believe everyone - of every race, gender, sexuality, age, location and income - deserves the opportunity to live their healthiest life. Today, however, there are still far too many barriers to good health which are disproportionately experienced by people of color, historically marginalized groups and those with lower incomes. We are committed to mitigating our impact on the environment and enabling and delivering equitable care that addresses health disparities and improves health outcomes - an enterprise priority reflected in our mission.

Quality Engineer (diesel engine materials engineering and metallurgical analysis Experience ) We are seeking a highly analytical and experienced Quality Engineer with 4 to 6 years of specialized experience in Diesel Engine Materials Engineering and Metallurgical Analysis. This critical role is instrumental in ensuring the highest standards of quality and integrity for our diesel engine components and systems. Your primary responsibilities will include conducting in-depth metallurgical analysis of raw materials, in-process components, and finished engine parts to assess their microstructure, mechanical properties, and compliance with specifications. You will be responsible for investigating material failures, root cause analysis of defects, and recommending corrective and preventive actions. This involves using a range of laboratory techniques such as microscopy (optical, SEM), hardness testing, tensile testing, impact testing, and spectroscopy. You will also develop and implement material quality control plans, inspect incoming materials, and manage supplier quality for critical engine components. A strong understanding of various materials used in diesel engines (e.g., cast iron, steel alloys, aluminum alloys) and their heat treatment processes is essential. You will collaborate closely with design, manufacturing, and R&D teams to provide material-related expertise, contribute to design for manufacturability and reliability, and improve overall product quality. Ensuring adherence to industry standards and internal quality procedures will be a key aspect of your role.

Job Role : Sr. Engineer (Quality) Work Location : Catalydd Engineering and Consulting (Faridabad Office) (1st Floor, Office, No. 3, Baisla House, Shyam Colony, Sector 4, Ballabhgarh, Faridabad, Haryana 121004) Education : Diploma/B.E./B.Tech. (Mechanical/Automotive/Production) only Experience : Experience candidate in the Product Quality inspection Min 6 year & max 7 years Responsibilities : 1. Taking care of Customers Handling. 2. Visit Daily Basis on sites , Able to manage the Issues of Sites. 3. Leadership with Able to giving trainings on site with Engineer. 4. Can Independently handle of All Projects as per our Project Management Check sheet. 5. Lead the development, implementation, and improvement of quality management systems (QMS) in alignment with automotive industry standards (IATF 16949, ISO 9001, etc.). 6. Perform root cause analysis and implement corrective actions for identified defects and quality issues. 7. Knowledge of automotive manufacturing processes such as Sheet Metals, Fabrications, Fasteners, injection molding, machining, and assembly. 8. Required one major core knowledge of Business Development for the EXISTING CUSTOMER NEW BUSINESS mind Strategy type. 9. In-depth knowledge of automotive industry standards (IATF 16949, ISO 9001) and quality management tools (SPC, FMEA, APQP, PPAP, MSA, etc.).. 10. Core Knowledge of PPT , Data Making & Proficient in statistical analysis software (MS Office, Excel, etc.) and quality tools (e.g., 8D, Ishikawa diagrams).. 11. Good written & verbal communication skills 12. Ability to travel as needed (domestic/international) to support customer or supplier activities 13. 5+ years of experience in quality engineering within the automotive industry, preferably in OEM or Tier 1 supplier roles.. 14. Prepare and present detailed quality reports for management and customers and maintain team discipline across all Project. Working Days : 6 Working Hours : 8 Hrs (Excluding Breaks) Shift : General Shift Weekly Off : Sunday Benefits : * PF, Mediclaim, etc. * On Role Job * Will help in building a career in the Quality Department * Will get Free training on various Quality Tools. Education- Diploma / B.E. / B.Tech (Mechanical/Production/Automobile/Electronics/Electrical)

Develop and implement quality control systems. Monitor and audit production processes. Inspect raw materials, components, and final products. Identify and resolve quality-related issues. Document best practices for mechanical quality assurance.

We are seeking a highly analytical and experienced Quality Engineer with 4 to 6 years of specialized experience in Diesel Engine Materials Engineering and Metallurgical Analysis. This critical role is instrumental in ensuring the highest standards of quality and integrity for our diesel engine components and systems. Your primary responsibilities will include conducting in-depth metallurgical analysis of raw materials, in-process components, and finished engine parts to assess their microstructure, mechanical properties, and compliance with specifications. You will be responsible for investigating material failures, root cause analysis of defects, and recommending corrective and preventive actions. This involves using a range of laboratory techniques such as microscopy (optical, SEM), hardness testing, tensile testing, impact testing, and spectroscopy. You will also develop and implement material quality control plans, inspect incoming materials, and manage supplier quality for critical engine components. A strong understanding of various materials used in diesel engines (e.g., cast iron, steel alloys, aluminum alloys) and their heat treatment processes is essential. You will collaborate closely with design, manufacturing, and R&D teams to provide material-related expertise, contribute to design for manufacturability and reliability, and improve overall product quality. Ensuring adherence to industry standards and internal quality procedures will be a key aspect of your role.

SUMMARY We are seeking a meticulous Quality Assurance/Quality Control Engineer to supervise mechanical piping/structure projects within the industrial construction sector. The perfect candidate will possess 4 5 years of pertinent experience in QA/QC positions in mechanical construction, with a specific emphasis on process and utility piping systems/mechanical structures in industrial environments. Requirements Requirements: 4 5 years of experience in QA/QC roles within mechanical construction Familiarity with process and utility piping systems/mechanical structures in industrial settings

Quality Shift In charge Designation - Engineer/ Sr EngineerQualification - B. Tech Mechanical/chemical/CIPET or PGD PPT from CIPET Experience - Min 5 Years & above Job Responsibilities Shift Communication (HandOver and Take Over ) details from previous shift issues at each stage wise Manpower arrangement in the Shift Responsible for the Product Quality of all Process during Operation Ensure all Process should run as per defined SOP Decision for 1st Piece approval in every process & Ensure the TQM activities during shift operation Coordination with Production Team for Product approvals in different process Provide Training awareness with the Production & TQM guys & share the Customer requirements Knowledge in SAP Quality module Defect Analysis with Production team during Startup, restart of machine and Online inspection periods.. Focus on Critical to Quality at each stage wise and Customer Point of View Ensure Lab activities at Night Perform AQL activities as per Sampling Plan Customer Complaint Site Visit as & When required Good command in Excel & Power point. Skilled in making reports & Power point presentation & English communication skill

DevOps Engineer Lead Important Information Location: Anywhere in India (Preferrable Bangalore) Job Summary As a DevOps Engineer Lead, you will be responsible for leading the DevOps initiatives within the client organization, driving the adoption of best practices, and ensuring the seamless integration of development and operations processes. You will mentor a team of DevOps engineers, optimize deployment pipelines, and manage infrastructure to support reliable and scalable software delivery. Responsibilities and Duties Lead the development and implementation of deployment pipelines and automation processes. Guide and mentor a team of DevOps engineers, fostering a collaborative and high-performance culture. Oversee the management and optimization of infrastructure as code (IaC) to ensure consistency and scalability. Collaborate with cross-functional teams to align DevOps strategies with business objectives and improve system performance. Monitor system performance, identify areas for improvement, and implement solutions to enhance reliability and efficiency. Develop and enforce best practices for DevOps processes, tools, and technologies across the organization. Stay informed of industry trends and emerging technologies, driving continuous improvement in DevOps practices. Qualifications and Skills Bachelor s degree in computer science, engineering, or a related field. Extensive 8+ years of experience with DevOps tools, CI/CD pipelines, automation, and infrastructure management. Tech stack detailed below. Proven leadership skills, with experience in mentoring and managing engineering teams. Proficiency in scripting languages (e.g., Bash, Python) and version control systems (e.g., Git). Strong problem-solving abilities and the capacity to address complex system issues. Excellent communication skills, with the ability to collaborate effectively with cross-functional teams. Additional Requirements Technologies: Must have : AWS, terraform, CI/CD Pipelines, k8s, docker, helm Good to have : GitHub Actions, SRE(Grafana, Prometheus) Competencies: Certifications: Encora is a global company that offers Software and Digital Engineering solutions. Our practices include Cloud Services, Product Engineering & Application Modernization, Data & Analytics, Digital Experience & Design Services, DevSecOps, Cybersecurity, Quality Engineering, AI & LLM Engineering, among others. At Encora, we hire professionals based solely on their skills and do not discriminate based on age, disability, religion, gender, sexual orientation, socioeconomic status, or nationality.

Berger Paints India Ltd ( British Paints Div ) is looking for Senior Concrete Technologist to join our dynamic team and embark on a rewarding career journey. Preparing examination rooms for patient examinations. Administering radiopharmaceuticals to obtain clear, usable images. Positioning patients and equipment, explaining the procedures, and ensuring patients' comfort. Inserting commands and data into the computer to document and specify the scan sequences, and monitoring the video display to adjust the density or contrast. Monitoring patients during examinations, ensuring their safety, and following procedures to prevent unnecessary exposure to radiation. Producing diagnostic images, reporting important information to the Physician, and updating patients' records. Organizing the daily procedure schedules for emergencies and monitoring radiographic supplies. Performing administrative tasks, such as answering technical questions, scheduling appointments, and offering pre-procedure advice. Performing scheduled maintenance and emergency repairs on radiographic equipment.

Berger Paints India Ltd ( British Paints Div ) is looking for Senior Concrete Technologist to join our dynamic team and embark on a rewarding career journey. Preparing examination rooms for patient examinations. Administering radiopharmaceuticals to obtain clear, usable images. Positioning patients and equipment, explaining the procedures, and ensuring patients' comfort. Inserting commands and data into the computer to document and specify the scan sequences, and monitoring the video display to adjust the density or contrast. Monitoring patients during examinations, ensuring their safety, and following procedures to prevent unnecessary exposure to radiation. Producing diagnostic images, reporting important information to the Physician, and updating patients' records. Organizing the daily procedure schedules for emergencies and monitoring radiographic supplies. Performing administrative tasks, such as answering technical questions, scheduling appointments, and offering pre-procedure advice. Performing scheduled maintenance and emergency repairs on radiographic equipment.

We have Golden Opportunities in Core Electrical Company at Pune region Job Location - Talegaon / chakan /Bhosari Salary - 20k -23k Functional area - R&D /Quality /maintenance Engineer/ Facility-Transportation+ PF + ESI+ ON ROLL Call - 7558381633

Strong understanding of basic mechanical engineering concepts Perform incoming, in-process, and final inspections of mechanical parts and assemblies. Assist in the preparation and maintenance of inspection records and quality reports. Required Candidate profile Ensure that manufacturing processes comply with quality standards and internal procedures Coordinate with production, design, and supply chain teams to resolve quality issues

Project Role : Test Automation Lead Project Role Description : Lead the transformation of testing into a continuous and efficient end-to-end quality engineering function through the use of quality processes, tools, and methodologies significantly improving control, accuracy and integrity. Evolve more predictive and intelligent testing approaches based on automation and innovative testing products and solutions. Must have skills : Automated Testing Good to have skills : NAMinimum 3 year(s) of experience is required Educational Qualification : 15 years full time education Summary :As a Test Automation Lead, you will be at the forefront of transforming testing into a continuous and efficient end-to-end quality engineering function. Your typical day will involve collaborating with cross-functional teams to implement quality processes and methodologies that enhance control, accuracy, and integrity in testing. You will also focus on evolving predictive and intelligent testing approaches, leveraging automation and innovative testing products to drive improvements in quality assurance practices. Your role will require you to lead initiatives that foster a culture of quality and continuous improvement within the organization, ensuring that testing is seamlessly integrated into the development lifecycle. Roles & Responsibilities:- Expected to perform independently and become an SME.- Required active participation/contribution in team discussions.- Contribute in providing solutions to work related problems.- Facilitate knowledge sharing sessions to enhance team capabilities.- Develop and implement testing strategies that align with project goals. Professional & Technical Skills: - Must To Have Skills: Proficiency in Automated Testing.- Strong understanding of various testing frameworks and tools.- Experience in developing automated test scripts and test cases.- Ability to analyze test results and provide actionable insights.- Familiarity with continuous integration and continuous deployment practices. Additional Information:- The candidate should have minimum 3 years of experience in Automated Testing.- This position is based at our Bengaluru office.- A 15 years full time education is required. Qualification 15 years full time education

Project Role : Test Automation Lead Project Role Description : Lead the transformation of testing into a continuous and efficient end-to-end quality engineering function through the use of quality processes, tools, and methodologies significantly improving control, accuracy and integrity. Evolve more predictive and intelligent testing approaches based on automation and innovative testing products and solutions. Must have skills : Automated Testing Good to have skills : NAMinimum 5 year(s) of experience is required Educational Qualification : 15 years full time education Summary :As a Test Automation Lead, you will lead the transformation of testing into a continuous and efficient end-to-end quality engineering function. Your typical day will involve collaborating with various teams to implement quality processes, tools, and methodologies that significantly enhance control, accuracy, and integrity in testing. You will also focus on evolving predictive and intelligent testing approaches, leveraging automation and innovative testing products and solutions to drive improvements in quality engineering. Roles & Responsibilities:- Expected to be an SME.- Collaborate and manage the team to perform.- Responsible for team decisions.- Engage with multiple teams and contribute on key decisions.- Provide solutions to problems for their immediate team and across multiple teams.- Mentor junior team members to enhance their skills and knowledge in automated testing.- Continuously assess and improve testing processes to ensure optimal efficiency and effectiveness. Professional & Technical Skills: - Must To Have Skills: Proficiency in Automated Testing.- Strong understanding of test automation frameworks and tools.- Experience with continuous integration and continuous deployment practices.- Familiarity with scripting languages for test automation.- Ability to analyze and interpret test results to provide actionable insights. Additional Information:- The candidate should have minimum 5 years of experience in Automated Testing.- This position is based at our Bengaluru office.- A 15 years full time education is required. Qualification 15 years full time education

Project Role : Quality Engineer (Tester) Project Role Description : Enables full stack solutions through multi-disciplinary team planning and ecosystem integration to accelerate delivery and drive quality across the application lifecycle. Performs continuous testing for security, API, and regression suite. Creates automation strategy, automated scripts and supports data and environment configuration. Participates in code reviews, monitors, and reports defects to support continuous improvement activities for the end-to-end testing process. Must have skills : Micro Focus LoadRunner Good to have skills : HP Service Managment, HPSM Architecture and ConfigurMinimum 3 year(s) of experience is required Educational Qualification : 15 years full time education Summary :As a Quality Engineer (Tester), you will enable full stack solutions through multi-disciplinary team planning and ecosystem integration to accelerate delivery and drive quality across the application lifecycle. You will perform continuous testing for security, API, and regression suite, create automation strategy, automated scripts, and support data and environment configuration. Participate in code reviews, monitor, and report defects to support continuous improvement activities for the end-to-end testing process. Roles & Responsibilities:- Expected to perform independently and become an SME.- Required active participation/contribution in team discussions.- Contribute in providing solutions to work related problems.- Develop and execute automated test scripts.- Collaborate with cross-functional teams to ensure quality deliverables.- Identify and report software defects.- Analyze test results and provide recommendations for improvements.- Stay updated with industry trends and best practices. Professional & Technical Skills: - Must To Have Skills: Hands On experience in Micro Focus LoadRunner.- Experience in Monitoring /Profiles tools - APPD, DynaTrace, Jprofiler- Experience in Workload Modelling- Exp in AWR report Analysis, Heap Dump Analysis, Thread Dump Analysis- Strong understanding of performance testing methodologies.- Experience in load testing web applications.- Knowledge of scripting languages like JavaScript or Python.- Hands-on experience with test automation tools.- Familiarity with Agile and DevOps practices. Additional Information:- The candidate should have a minimum of 3 years of experience in Micro Focus LoadRunner.- This position is based at our Pune office.- A 15 years full time education is required. Qualification 15 years full time education

Were looking for people who put their innovation to work to advance our success and their own Join an organization that ensures a more secure world through connecting and protecting our customers with inventive electrical solutions. In This Position, You Will Get To Perform the supplier approval process, assessing Manufacturing/Standards/Technology capabilities, and addressing Health, Safety, and Environmental risks (ROHS, REACH, WEEE) Facilitate root cause analysis and corrective actions for supplier quality issues; validate SCAR (Supplier Corrective Action Request) and oversee implementations Conduct on-site supplier visits for root cause analysis and verification of correction actions Review supplier manufacturing processes, collaborating on process improvement and value enhancement opportunities Promote customer-preferred techniques for continuous improvement (Lean, Kaizens, Six-Sigma, Poka-Yoke, Measurement System Analysis, PFMEA & CP) Manage and coordinate supplier Parts Per Million (PPM), supplier problem-solving, cost recovery, and supplier warranty indicators Ensure incoming quality of assigned commodity parts received from suppliers and internal factories Review internal component rejections and take appropriate actions Impose Cost of Poor Quality (COPQ) on suppliers for major issues by coordinating with Purchase and Finance departments Support new product launches to ensure supplier quality aligns with required standards Test and validate new development samples from suppliers for Electrical commodities (e.g., Wiring harnesses, Power Cords, Circuit Breakers, PCBAs, Outlets, etc.) Collaborate with Engineering teams to define process parameters, ensuring supplier process capability meets product and process requirements Ensure successful completion of assigned goals by the Quality Manager and nVent Management. You Have Diploma/Bachelor of Engineering (BE/B Tech) in Electrical / Electronics / E&TE / Mechanical Knowledge of ISO Lead Auditor, APQP, PPAP, FMEA, MSA 6 Sigma, IPC610 & IPC/WHMA-A-620 Training/Certification are as an added advantage Competent in driving improvement through problem-solving methodologies (8D, Kaizen, A3, Lean, 6 Sigma). 6 or more years of work experience in manufacturing areas (Manufacturing Quality, Supplier Quality, IQC & NPD Quality). Abilities to meet the physical and environmental demands We Have A dynamic global reach with diverse operations around the world that will stretch your abilities, provide plentiful career opportunities, and allow you to make an impact every day nVent is a leading global provider of electrical connection and protection solutions We believe our inventive electrical solutions enable safer systems and ensure a more secure world We design, manufacture, market, install and service high performance products and solutions that connect and protect some of the world's most sensitive equipment, buildings and critical processes We offer a comprehensive range of systems protection and electrical connections solutions across industry-leading brands that are recognized globally for quality, reliability and innovation. Our principal office is in London and our management office in the United States is in Minneapolis Our robust portfolio of leading electrical product brands dates back more than 100 years and includes nVent CADDY, ERICO, HOFFMAN, ILSCO, SCHROFF and TRACHTE Learn more at www.nvent.com. Commitment to strengthen communities where our employees live and work We encourage and support the philanthropic activities of our employees worldwide Through our nVent in Action matching program, we provide funds to nonprofit and educational organizations where our employees volunteer or donate money Core values that shape our culture and drive us to deliver the best for our employees and our customers Were known for being: Innovative & adaptable Dedicated to absolute integrity Focused on the customer first Respectful and team oriented Optimistic and energizing Accountable for performance Benefits to support the lives of our employees At nVent, we connect and protect our customers with inventive electrical solutions People are our most valuable asset Inclusion and diversity means that we celebrate and encourage each others authenticity because we understand that uniqueness sparks growth.

Greeting from Ashkom! We are hiring for the role of Construction Quality Manager for the well known MNC FMCG Company, Position based at Baddi - Himachal Pradesh. JOB DESCRIPTION Designation : Construction Quality Manager Location : Baddi - Himachal Pradesh. Experience : 10+ years of experience (Preferably looking for Pharma/ FMCG Industrial construction working experience) Qualification : BE/B Tech - Civil (Masters degree in project management will be added advantage) Role and Responsibilities The role of the quality control program is to assure the construction execution meets the requirements of construction code, specification and drawing indication as well as the requirements of Organization. The Quality manager will be responsible for rolling out and managing the quality plan for the project. Design & Bidding Phase Develop project quality management plan and implement. Participation in design reviews. Fully understand Design basis/ Specification. Provide inputs to engineering design package during each time design review and constructability inputs. Bidder document evaluation and make recommendations. Vendor/Factory visit for qualification. Attend supplier site visit and provide question answers. Qualification of key construction materials. Initial Execution Phase Lead the review and approval of Construction Method Statement. Review and approval of Inspection Test Plan (ITP) for construction activities. Develop project documentation system for drawing and RFI. Ensure on time Shop drawing submission from contractors. Review and coordinate the approval of shop drawing from designer/concerned department. Develop the quality organization & Quality Observation Surveys (QOS). Ensure technical readiness of contractors. Detail plan for supplier factory visit. Develop plans of sampling/ Mock-up system for construction material. Develop the quality checklist system for different activities. Participate the Kick of Meeting (KOM) with vendor. Develop the Weekly and monthly quality reports system. Middle of the project Review of material testing reports. Execute sampling/ Mock-up system for construction material. Tracking systems for drawing and RFI. Track the Quality Observation Surveys (QOS). Support the quality organization/ Do daily Behavior Observation Surveys. Co-ordinate/participate in factory visit/ testing. Manage 3rd Party QA/quality engineers to ensure all construction works compliance with specifications and local Indian standards. Coordinate with local Indian Quality Inspection Bureau on all quality inspection issues. Fully understand Company and design required Quality standard and deploy to general contractor. Coordinate daily on-site quality activity. Coordinate Quality incident investigation. Non-conformance issues tracking and correction. Maintained the weekly and monthly quality reports. Coordinate Government quality acceptance inspection. Coordinate for interdisciplinary clashes at site. Final stage & Post close out of the project PSU/ Punch list completion. Verification of Handing over documents. Develop plans and implement the Handing Over system to plant owners. Building & Utility Related Testing & Commissioning Manage contractors Testing & Commissioning Plan with the coordination of contractor. Coordinate between all contractors and M&E equipment utilities suppliers. Site inspection of all works done. Collect all utility equipment warranty and operating manuals. Hand over all testing report to Company. Expertise required from candidate- MS tool Excel, Power point, Word. MS project. AutoCAD. Construction quality management system. Layout readiness review & approval for project. Construction management system. Developing company quality procedures, standards, and specifications. Matching processes with standards. Coordinating activity required to meet quality standards. Conducting internal audits and inspections. Interested applicants can share their resume on nidhi.j.ashkom@gmail.com You can share this among the relevant candidates. References are highly appreciated.

Greetings from Ashkom! We are hiring for the role of Construction Quality Manager (Civil) for the well known MNC FMCG company, position based at Baddi - Himachal Pradesh. JOB DESCRIPTION Designation : Construction Quality Manager Location : Baddi - Himachal Pradesh. Experience : 10+ years of experience (Preferably looking for Pharma/ FMCG Industrial construction working experience) Qualification : BE/B Tech - Civil (Masters degree in project management will be added advantage) Role and Responsibilities The role of the quality control program is to assure the construction execution meets the requirements of construction code, specification and drawing indication as well as the requirements of Organization. The Quality manager will be responsible for rolling out and managing the quality plan for the project. Design & Bidding Phase Develop project quality management plan and implement. Participation in design reviews. Fully understand Design basis/ Specification. Provide inputs to engineering design package during each time design review and constructability inputs. Bidder document evaluation and make recommendations. Vendor/Factory visit for qualification. Attend supplier site visit and provide question answers. Qualification of key construction materials. Initial Execution Phase Lead the review and approval of Construction Method Statement. Review and approval of Inspection Test Plan (ITP) for construction activities. Develop project documentation system for drawing and RFI. Ensure on time Shop drawing submission from contractors. Review and coordinate the approval of shop drawing from designer/concerned department. Develop the quality organization & Quality Observation Surveys (QOS). Ensure technical readiness of contractors. Detail plan for supplier factory visit. Develop plans of sampling/ Mock-up system for construction material. Develop the quality checklist system for different activities. Participate the Kick of Meeting (KOM) with vendor. Develop the Weekly and monthly quality reports system. Middle of the project Review of material testing reports. Execute sampling/ Mock-up system for construction material. Tracking systems for drawing and RFI. Track the Quality Observation Surveys (QOS). Support the quality organization/ Do daily Behavior Observation Surveys. Co-ordinate/participate in factory visit/ testing. Manage 3rd Party QA/quality engineers to ensure all construction works compliance with P&G specifications and local Indian standards. Coordinate with local Indian Quality Inspection Bureau on all quality inspection issues. Fully understand Company and design required Quality standard and deploy to general contractor. Coordinate daily on-site quality activity. Coordinate Quality incident investigation. Non-conformance issues tracking and correction. Maintained the weekly and monthly quality reports. Coordinate Government quality acceptance inspection. Coordinate for interdisciplinary clashes at site. Final stage & Post close out of the project PSU/ Punch list completion. Verification of Handing over documents. Develop plans and implement the Handing Over system to plant owners. Building & Utility Related Testing & Commissioning Manage contractors Testing & Commissioning Plan with the coordination of contractor. Coordinate between all contractors and M&E equipment utilities suppliers. Site inspection of all works done. Collect all utility equipment warranty and operating manuals. Hand over all testing report to Company. Expertise required from candidate- MS tool Excel, Power point, Word. MS project. AutoCAD. Construction quality management system. Layout readiness review & approval for project. Construction management system. Developing company quality procedures, standards, and specifications. Matching processes with standards. Coordinating activity required to meet quality standards. Conducting internal audits and inspections. Interested applicants can share their resume on shweta.s.ashkom@gmail.com You can share this among the relevant candidates. References are highly appreciated.

Responsibilities: Conduct quality inspections using micrometers, Vernier calipers, bore gauges, drawing reading, and gauge checks. Ensure adherence to industry standards through regular audits. Annual bonus

Join us as we pursue our innovative vision to make machine data accessible, usable, and valuable to everyone We are a company filled with people who are passionate about our product and seek to deliver the best experience for our customers At Splunk, were committed to our work, our customers, having fun, and most meaningfully, to each others success Learn more about Splunk careers and how you can become a part of our journey! Are you passionate about working on critical systems to create tangible customer impactWould you like the opportunity to work at a growing company that is changing the way that information is used to support business decisionsIf this resonates with you, we would love to speak with you, Our Data Processing team is a dynamic technology group with a mission to be the primary data processing path for any type of data transformation and routing activity in near real-time If you possess a passion for extraordinary technology leadership and embrace the challenge of working at the frontier of what is possible in the industry today, then this position is for you We are building state-of-the art capabilities, real-time messaging and streaming systems, support tools, and automation instrumentation that will greatly impact how our customers successfully use data to improve their businesses performance, scalability, profitability, and market strategies, Role Lead and participate in the complete software development cycle: Understand requirements, design, develop, test, automate, and deploy software, Identify and resolve pre-production system bottlenecks and production issues, Engage in design and code reviews of the product, and enhance your knowledge of customers' experiences to prevent future problems, Make code maintainable and the product diagnosable and serviceable, Participate in rotating on-call duties to diagnose and solve customer issues, Utilize WDIO test automation for effective and efficient testing, Conduct performance and scale reliability testing to ensure the robustness of our systems, Develop and execute unit tests to verify individual components' functionality, Write comprehensive test cases and maintain a library of test cases for various scenarios, Continuously identify test gaps and fortify test cases and test plans to ensure comprehensive coverage, Diagnose escalations and issues that arise in the production environment and work on solutions, Requirements Strong fundamentals in software engineering: data structures and algorithms 8+ years of work experience in Software Development Engineer in Test with automation testing experience Coding proficiency in one or more of the following languages with the ability to quickly learn new languages: Python, Java, Go, C++ Experience in working on distributed systems like databases, distributed file systems, distributed concurrency control Strong debugging and troubleshooting skills including the use of associated tools Experience with developing CI/CD systems with Gitlab, test automation frameworks, Ability to document your work for the benefit of the team Knowledge of REST, grpc or similar communication paradigms Knowledge of public cloud services such as AWS, GCP, Azure Operational excellence: You think beyond feature delivery into how your code is serving customers in production Familiarity with Kafka and data streams for data processing and testing purposes, Expertise in software quality engineering principles and practices, including test planning, test case design, and quality assurance methodologies, Proven ability to diagnose escalations and production issues and work on effective solutions, Strong analytical skills to identify and address test gaps and improve test coverage, What We Offer A team of incredibly capable and dedicated peers, all the way from engineering to product management and customer support, A stable, collaborative, and supportive work environment We work in an open environment, work together to get things done, and adapt to the changing needs of the team We keep it real by being open and honest, Balance We want you to be successful outside of work too We trust our colleagues to be responsible with their time and commitment, and believe that balance helps cultivate a positive environment, Fun We are committed to having every employee want to give it their all, be respectful and a part of the family, and have a smile on their face while doing it, We value diversity at our company All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, or any other applicable legally protected characteristics in the location in which the candidate is applying,

Who We Are Samsara (NYSE: IOT) is the pioneer of the Connected OperationsCloud, which is a platform that enables organizations that depend on physical operations to harness Internet of Things (IoT) data to develop actionable insights and improve their operations At Samsara, we are helping improve the safety, efficiency and sustainability of the physical operations that power our global economy Representing more than 40% of global GDP, these industries are the infrastructure of our planet, including agriculture, construction, field services, transportation, and manufacturing and we are excited to help digitally transform their operations at scale, Working at Samsara means youll help define the future of physical operations and be on a team thats shaping an exciting array of product solutions, including Video-Based Safety, Vehicle Telematics, Apps and Driver Workflows, Equipment Monitoring, and Site Visibility As part of a recently public company, youll have the autonomy and support to make an impact as we build for the long term, About the role: Samsaras Quality Engineering (QE) team uses test engineering and data analysis skills to drive product quality so that our customers can realize the full benefits of our platform In addition to testing the product, the QE team seeks to cultivate a quality culture that produces best in class product reliability, usability, and performance across all of our product development teams, Samsaras mobile applications, APIs, and web platform enable our customers to enhance the safety, efficiency, and sustainability of their operations Were looking for an experienced Quality Engineering leader who will lead, coach, and manage our team of Fullstack, API, and Mobile Software Quality Engineers, This hybrid position requires 3 days per week in our Bengaluru office and 2 days working remotely This position is open to candidates based in India, relocation assistance will not be provided for this role, You should apply if: You want to impact the industries that run our world: Your efforts will result in real-world impacthelping to keep the lights on, get food into grocery stores, reduce emissions, and most importantly, ensure workers return home safely, You are the architect of your own career: If you put in the work, this role wont be your last at Samsara We set up our employees for success and have built a culture that encourages rapid career development, countless opportunities to experiment and master your craft in a hyper growth environment, Youre energized by our opportunity: The vision we have to digitize large sectors of the global economy requires your full focus and best efforts to bring forth creative, ambitious ideas for our customers, You want to be with the best: At Samsara, we win together, celebrate together and support each other You will be surrounded by a high-calibre team that will encourage you to do your best, In this role, you will: Develop and execute test plans, test cases, and test scripts for Salesforce applications, particularly focusing on CPQ and Sales Cloud functionalities, Collaborate with cross-functional teams including product management, development, and operations to ensure quality and timely delivery of features, Conduct functional, regression, integration, and performance testing for Salesforce applications, Identify, document, and track defects found during testing; ensure timely resolution, Automate testing scenarios to improve efficiency using tools such as Selenium, JUnit, or other relevant frameworks, Analyze requirements and provide feedback for improvement, ensuring robust quality throughout the software development lifecycle, Mentor and guide junior QA engineers in best practices and methodologies, Minimum requirements for the role: Bachelor's degree in Computer Science, Information Technology, or a related field, 5+ years of experience in Quality Engineering/testing, with at least 2 years of experience specifically with Salesforce CPQ and Sales Cloud, Proficiency in manual testing methodologies and experience in automated testing tools/frameworks, Strong understanding of Salesforce architecture, including objects, fields, and relationships in CPQ and Sales Cloud, Experience with defect tracking and test management tools (e-g, JIRA, TestRail), Excellent problem-solving skills and attention to detail, An ideal candidate also has: Salesforce certifications, particularly Salesforce Advanced Administrator, Salesforce CPQ Specialist, or Salesforce Sales Cloud Consultant, Experience in performance testing tools and techniques, Knowledge of Agile development methodologies and experience in working within Agile teams, Familiarity with CI/CD processes and tools (e-g, Jenkins, Bitrise), Strong communication skills with a collaborative mindset and the ability to work in a fast-paced environment, Ability to mentor and lead a team towards achieving high-quality standards, At Samsara, we welcome everyone regardless of their background All qualified applicants will receive consideration for employment without regard to race, color, religion, national origin, sex, gender, gender identity, sexual orientation, protected veteran status, disability, age, and other characteristics protected by law We depend on the unique approaches of our team members to help us solve complex problems and want to ensure that Samsara is a place where people from all backgrounds can make an impact, Benefits Full time employees receive a competitive total compensation package along with employee-led remote and flexible working, health benefits, Samsara for Good charity fund, and much, much more Take a look at our Benefits site to learn more, Accommodations Samsara is an inclusive work environment, and we are committed to ensuring equal opportunity in employment for qualified persons with disabilities Please email accessibleinterviewing@samsara , com or click here if you require any reasonable accommodations throughout the recruiting process, Flexible Working At Samsara, we embrace a flexible working model that caters to the diverse needs of our teams Our offices are open for those who prefer to work in-person and we also support remote work where it aligns with our operational requirements For certain positions, being close to one of our offices or within a specific geographic area is important to facilitate collaboration, access to resources, or alignment with our service regions In these cases, the job description will clearly indicate any working location requirements Our goal is to ensure that all members of our team can contribute effectively, whether they are working on-site, in a hybrid model, or fully remotely All offers of employment are contingent upon an individuals ability to secure and maintain the legal right to work at the company and in the specified work location, if applicable, Fraudulent Employment Offers Samsara is aware of scams involving fake job interviews and offers Please know we do not charge fees to applicants at any stage of the hiring process Official communication about your application will only come from emails ending in @samsara,comor @us-greenhouse-mail io For more information regarding fraudulent employment offers, please visit our blog post here,

Study and review drawings of sheet metal parts. Complete the feasibility in detail with supplier. Tooling development monitoring and reporting to stake holders. Ensure the CQC & process approval. Ensure on time availability of parts during the various vehicle build phase (Proto, Preseries, Avenseries, Pre-SOP & SOP). Initiatives for supplier up gradation, product quality improvements. To ensure first time and every time right new developments. Supplier Quality performance monitoring & improvement. Support for product quality improvement activities and to reduce defect rate of products Identify opportunities and work for improvement in product quality by working closely with cross functional team. Tracking of tooling status / part development. Supplier Quality performance monitoring & improvement. Prepares paperwork and reports documenting inspection findings. Good written & verbal communication skills. Proficient in Microsoft Word, Excel & PPT to prepare reports. Knowledge of manufacturing process for sheet metal and fabrication parts. 1. Positive Attitude. 2. Medically fitness mandatory 3. Willing to stay near to the plant location. 4. Communication on daily work management to Customer.

The Quality Assurance Engineer is responsible for ensuring that products meet the required quality standards and specifications throughout the manufacturing process. This role involves developing and implementing quality control systems, conducting audits, and collaborating with various departments to promote a culture of quality. Key Responsibilities: Quality Control: Develop and implement quality control processes and inspection protocols to ensure compliance with internal and external standards. Audits and Inspections: Conduct regular audits and inspections of manufacturing processes, equipment, and products to identify areas for improvement. Documentation: Maintain accurate records of quality checks, audits, and non-conformance reports. Ensure proper documentation of quality assurance activities. Collaboration: Work closely with production, engineering, and supply chain teams to address quality issues and implement corrective actions. Training: Provide training to staff on quality standards and best practices to foster a quality-oriented culture. Continuous Improvement: Lead continuous improvement initiatives focused on enhancing product quality and process efficiency. Compliance: Ensure compliance with industry standards, regulatory requirements, and company policies. Qualifications: Bachelors degree in Engineering, Manufacturing, or a related field. years of experience in quality assurance or quality control in a manufacturing environment. Strong understanding of quality management systems (e.g., ISO 9001). Proficient in statistical analysis and quality improvement tools (e.g., Six Sigma, Lean). Excellent problem-solving skills and attention to detail. Strong communication and interpersonal skills. Preferred Qualifications: Certification in Quality Engineering (CQE) or related credentials. Experience with product testing and validation processes. Ability to work in a manufacturing environment with exposure to machinery and production processes. Mandatory Key Skills Six Sigma,Lean,Quality Engineering,product testing,production processes,Quality Control*,Audits Inspections*,Documentation*