89 Piping Engineering Jobs

Co-ordination & Billing for Composite Building Construction Project Key Responsibilities: Site Supervision: Supervise day-to-day construction activities on-site, ensuring adherence to project plans, schedules, and quality standards. Ensure that the construction work complies with design specifications, drawings, and safety regulations. Coordinate and monitor subcontractors and laborers to ensure work is completed on time and within budget. Project Planning and Coordination: Assist in the preparation of project plans, including timelines, resource allocation, and material requirements. Coordinate with project managers, architects, and other engineers to ensure seamless execution of the project. Schedule and plan construction activities, resources, and materials to meet project deadlines. Quality Control: Conduct regular inspections to ensure that construction work is completed according to the approved quality standards. Identify any discrepancies or issues during the construction process and provide solutions to rectify them. Ensure that all construction activities are performed safely, following safety protocols and regulations. Technical Support: Provide technical guidance and support to construction teams and workers on-site. Review and approve construction materials and methods to ensure compliance with engineering standards. Resolve any technical issues that arise during construction and provide expert advice when required. Documentation & Reporting: Maintain detailed records of daily activities, progress reports, and any incidents or issues on-site. Prepare and submit progress reports to senior engineers, project managers, and clients. Ensure proper documentation of all work, including change orders, permits, and construction logs.

Open Roles in Piping Engineering: 1. Piping Layout Engineer Key Responsibilities: Develop piping layouts and routing in 3D model environment (SP3D / E3D preferred). Coordinate with process, mechanical, structural, and instrumentation disciplines for interface management. Ensure compliance with project specifications, layout philosophies, accessibility, and maintainability. Review vendor package interface and modularization requirements. Participate in 3D model reviews and clash resolutions. Requirements: 515 years of experience in piping layout for offshore projects. Strong knowledge of layout guidelines, spacing standards, and design philosophy. Experience on FPSO topsides or modular plants preferred. 2. Piping Stress Engineer Key Responsibilities: Conduct piping stress analysis using Caesar II . Evaluate thermal expansion, nozzle loads, support design, seismic, and dynamic loads. Interface with layout, structural, and mechanical teams. Prepare stress reports and recommend support requirements. Ensure compliance with ASME B31.3, API, DNV, and project standards. Requirements: 515 years in piping stress analysis. Proficient in Caesar II (mandatory). Experience with FPSO/offshore projects preferred. 3. 3D Administrator (Piping Systems) Key Responsibilities: Manage project 3D model environment (SP3D / E3D / PDMS). Set up project specs, pipe catalogs, piping components, and data integrity. Coordinate with IT/engineering teams to maintain database and project model. Troubleshoot issues in modeling tools and provide admin-level support. Monitor clash management and model review configurations. Requirements: 515 years of experience as a 3D administrator in piping systems. Strong hands-on knowledge of SP3D, E3D, or equivalent. Familiarity with piping specifications, class creation, and engineering data flows. 4. Piping Designer Key Responsibilities: Prepare piping isometrics, GADs, support drawings, and equipment layouts. Model piping components in 3D (SP3D / E3D / PDMS). Apply standard practices and project specifications to produce accurate deliverables. Coordinate with layout and stress teams for routing and support feasibility. Ensure deliverables are issued on time with quality checks. Requirements: 5–15 years of experience in piping design. Strong proficiency in 3D modeling tools (SP3D / E3D / PDMS). Offshore or FPSO project experience preferred.

Position : Senior Mechanical Engineer - Projects Work Location : Nandesari - Vadodara Experience : 10 to 15 Years of project execution, construction and maintenance, currently working in projects group, past experience in maintenance. Role & responsibilities: Purpose /Role of the job : Provide Project Engineering & Construction services to Brownfield Capex projects Projects Requirement Capturing from O&M Team Project engineering especially provides expertise for Equipment & Piping Engineering Project Cost Estimation & Proposals Project planning, scheduling and monitoring Projects procurement including construction contract / services Project Execution and Construction Management Prepare project cost estimate and project proposals Plan, Schedule, coordinate & manage assigned projects and as discipline support Coordinate, follow-up & Execute projects in-house and/or by engaging consultants Vendor & contractors identification, assessment and engagement Ensures follow-up during design, procurement, construction and commissioning of relevant standards and procedures Full time support & supervision of project construction (dis-mantling & installation) & commissioning Material unloading / loading & stores management Environment/Context/Complexity of the job: Internal: Total compliance to SHE rules/guidelines, Development of Capex in compliance with Guidelines, Ensure the best engineering standards are followed and Implementation of projects from Concept to Commissioning, in equipment design, layout and piping and other Projects, from Mechanical perspective. External: Compliance to, all the statutory requirements of law/regulations. Coordination with Project consultants and Contractors. Responsibility/Accountability of the job: Key Result Areas: Incident free operations, Adherence SHE guideline, Compliance with local regulations. Major Activities: Attend regular safety training and ensure the same for project department employees, contractors and visitors on Safety rules and guidelines Operating procedures Incident sharing and learning Permit to work and Risk Assessment etc. To develop safety culture and drive for incident free operation within Project department and all contractors. To ensure that all project employees are communicated about site annual SHE improvement plan. To meet SHE KPIs and Targets set by management from time to time for all project employees. Participate in Behavior Based Safety program at site and ensure the same for all project staff. Participate in Site SHE committee, as required, to resolve safety issues and drive SHE performance at respective site. To ensure all incidents including Near Miss at site are reported, investigated and action items are tracked to closure. This includes all incidents for contractors. Use KMS for incident reporting and investigation, MOC, action item tracking Ensure SHE related action items from audits, plant walkthroughs etc. are tracked to closure. Outcome: Zero incident/ accident in the area of operation Key Result Areas: Project Development & Approval Major Activities: Prepare the project scope of work for all Capex Projects Coordination with discipline leads and operations team members for all cross-functional requirements Prepare the cost estimate for the equipment, packages, Piping and construction Prepare Activity list & schedule for Project, all in coordination with project controlling group. Prepare and Review specifications, datasheets for equipments Co-ordinate with Project Management Lead for seeking approvals according to the Delegation of Authority guidelines. Outcome: Project proposal development according to Company Capex Guidelines. Key Result Areas: Project Engineering Concept / Basic / Detailed Major Activities: Project Engineering coordination in-house or through consultants Review engineering deliverables for completeness Review / Approve vendor drawings Coordinate & collaborate with other disciplines for engineering integration Lead in Engineering Activities like equipment list, layouts, piping GA, Isometrics, fluid list and codes, vendor drawings and documentation requirements, formalize inspection plans and procedures, identify equipment spares and special tools requirements etc. Participates in constructability reviews, supports cost estimation and provides input into construction contracts, Ensure design basis aligns with Asset Care program Outcome: Ensure Project Engineering Deliverables for Mechanical discipline for completeness & quality Key Result Areas: Technical support to procurement Major Activities: Create Purchase Requisitions in SAP with enquiry / order specs Preparation & Review of Mechanical Data Sheets and BOQ for material & services Preparation of Technical Bid Comparison for equipment and piping services in conjunction with project procurement manager Ensure technical clarification for timely execution of Orders Post ordering activities; like design/drawing approval in line with the agreed schedule. Coordinating & participating in stage wise inspection & expediting Support procurement to expedite timely payment to ensure timely delivery Outcome: Procure Equipment / Material as per specifications & schedule Key Result Areas: Project Execution & Construction Management Major Activities: Project scheduling related to equipment and piping in coordination with Project controller Coordination with Function Head/OPS team for shutdown planning to meet timely completion Ensure all the safety standard are followed during engineering, construction and commissioning Implements a detailed work safety plan, conduct safety briefing and monitor safety measures continuously Ensure desired quality in work, through close coordination with Contractors & Consultants. Creating or Approving test procedures, Lift plans of contractor. Supervise Contractors work for Erection, Installation, Testing & commissioning of the Equipment / Package / System Supervise Contractors work for Fabrication, Erection, Installation, Testing of Structure, Piping including supports etc. Contractors Bill Certification for payment Ensure regular safety training at site for employees, contractors and visitors, including Behavior Based Safety programs Outcome: Construction activity completed according to planned timeline, defined quality aspect, and within budget. Key Result Areas: Pre-Commissioning Activities & Start up Major Activities: Co-ordinate with contractors and operations team to close all punch points and comply with user requirements Participate for PSSR(Pre Startup Safety Review) with OPS/SCM, SHE and GTO team (if required) Ensuring implementation/compliance of all PSSR recommendation Lead in pre-Startup activities of all equipment and piping supporting cleaning, flushing, control system checks, loop checking, calibrations, etc. Support final commissioning led by OPS team Lead the on-site coordination with suppliers, consultants & OPS for imparting training for relevant Equipment and packaged systems. Outcome: Safe & Successful startup and handing over of Project

Position: Mechanical Engineer - Projects Work Location: Nandesari - Vadodara Experience: 5 to 7 Years of project execution, construction and maintenance, currently working in projects group, past experience in maintenance. Role & responsibilities: Purpose /Role of the job: Provide Project Engineering & Construction services to Brownfield Capex projects Projects Requirement Capturing from O&M Team Project engineering especially provides expertise for Equipment & Piping Engineering Project Cost Estimation & Proposals Project planning, scheduling and monitoring Projects procurement including construction contract / services Project Execution and Construction Management Prepare project cost estimate and project proposals Plan, Schedule, coordinate & manage assigned projects and as discipline support Coordinate, follow-up & Execute projects in-house and/or by engaging consultants Vendor & contractors identification, assessment and engagement Ensures follow-up during design, procurement, construction and commissioning of relevant standards and procedures Full time support & supervision of project construction (dis-mantling & installation) & commissioning Material unloading / loading & stores management Environment/Context/Complexity of the job: Internal: Total compliance to SHE rules/guidelines, Development of Capex in compliance with Guidelines, Ensure the best engineering standards are followed and Implementation of projects from Concept to Commissioning, in equipment design, layout and piping and other Projects, from Mechanical perspective. External: Compliance to, all the statutory requirements of law/regulations. Coordination with Project consultants and Contractors. Responsibility/Accountability of the job: 1. Key Result Areas: Incident free operations, Adherence SHE guideline, Compliance with local regulations. Major Activities: Attend regular safety training and ensure the same for project department employees, contractors and visitors on Safety rules and guidelines Operating procedures Incident sharing and learning Permit to work and Risk Assessment etc. To develop safety culture and drive for incident free operation within Project department and all contractors. To ensure that all project employees are communicated about site annual SHE improvement plan. To meet SHE KPIs and Targets set by management from time to time for all project employees. Participate in Behavior Based Safety program at site and ensure the same for all project staff. Participate in Site SHE committee, as required, to resolve safety issues and drive SHE performance at respective site. To ensure all incidents including Near Miss at site are reported, investigated and action items are tracked to closure. This includes all incidents for contractors. Use KMS for incident reporting and investigation, MOC, action item tracking Ensure SHE related action items from audits, plant walkthroughs etc. are tracked to closure. Outcome: Zero incident/ accident in the area of operation Key Result Areas: Project Development & Approval Major Activities : Prepare the project scope of work for all Capex Projects Coordination with discipline leads and operations team members for all cross-functional requirements Prepare the cost estimate for the equipment, packages, Piping and construction Prepare Activity list & schedule for Project, all in coordination with project controlling group. Prepare and Review specifications, datasheets for equipments Co-ordinate with Project Management Lead for seeking approvals according to the Delegation of Authority guidelines. Outcome: Project proposal development according to Company Capex Guidelines. Key Result Areas: Project Engineering Concept / Basic / Detailed Major Activities: Project Engineering coordination in-house or through consultants Review engineering deliverables for completeness Review / Approve vendor drawings Coordinate & collaborate with other disciplines for engineering integration Lead in Engineering Activities like equipment list, layouts, piping GA, Isometrics, fluid list and codes, vendor drawings and documentation requirements, formalize inspection plans and procedures, identify equipment spares and special tools requirements etc. Participates in constructability reviews, supports cost estimation and provides input into construction contracts Ensure design basis aligns with Asset Care program Outcome: Ensure Project Engineering Deliverables for Mechanical discipline for completeness & quality 4. Key Result Areas: Technical support to procurement Major Activities: Create Purchase Requisitions in SAP with enquiry / order specs Preparation & Review of Mechanical Data Sheets and BOQ for material & services Preparation of Technical Bid Comparison for equipment and piping services in conjunction with project procurement manager Ensure technical clarification for timely execution of Orders Post ordering activities; like design/drawing approval in line with the agreed schedule. Coordinating & participating in stage wise inspection & expediting Support procurement to expedite timely payment to ensure timely delivery Outcome: Procure Equipment / Material as per specifications & schedule 5. Key Result Areas: Project Execution & Construction Management Major Activities: Project scheduling related to equipment and piping in coordination with Project controller Coordination with Function Head/OPS team for shutdown planning to meet timely completion Ensure all the safety standard are followed during engineering, construction and commissioning Implements a detailed work safety plan, conduct safety briefing and monitor safety measures continuously Ensure desired quality in work, through close coordination with Contractors & Consultants. Creating or Approving test procedures, Lift plans of contractor. Supervise Contractors work for Erection, Installation, Testing & commissioning of the Equipment / Package / System Supervise Contractors work for Fabrication, Erection, Installation, Testing of Structure, Piping including supports etc. Contractors Bill Certification for payment Ensure regular safety training at site for employees, contractors and visitors, including Behavior Based Safety programs Outcome: Construction activity completed according to planned timeline, defined quality aspect, and within budget. 6. Key Result Areas: Pre-Commissioning Activities & Start up Major Activities: Co-ordinate with contractors and operations team to close all punch points and comply with user requirements Participate for PSSR(Pre Startup Safety Review) with OPS/SCM, SHE and GTO team (if required) Ensuring implementation/compliance of all PSSR recommendation Lead in pre-Startup activities of all equipment and piping supporting cleaning, flushing, control system checks, loop checking, calibrations, etc. Support final commissioning led by OPS team Lead the on-site coordination with suppliers, consultants & OPS for imparting training for relevant Equipment and packaged systems. Outcome: Safe & Successful startup and handing over of Project

Work with Us. Change the World. At AECOM, we're delivering a better world. Whether improving your commute, keeping the lights on, providing access to clean water, or transforming skylines, our work helps people and communities thrive. We are the world's trusted infrastructure consulting firm, partnering with clients to solve the world’s most complex challenges and build legacies for future generations. There has never been a better time to be at AECOM. With accelerating infrastructure investment worldwide, our services are in great demand. We invite you to bring your bold ideas and big dreams and become part of a global team of over 50,000 planners, designers, engineers, scientists, digital innovators, program and construction managers and other professionals delivering projects that create a positive and tangible impact around the world. We're one global team driven by our common purpose to deliver a better world. Join us. Performs complex BIM or Plant Data Centric assignments involving the use of multiple application platforms, such as Revit, Intergraph SmartPlant, Plant 3D, etc. software, to achieve set results and deadlines Duties and Responsibilities Works under limited supervision. Provides training and technical support to design staff on the Building Information Modeling system, which provides 3D models using project specifications and content. Direct project support and production to assigned projects and create the drawings as required using the standards and content to meet the job requirements (objects within the drawing, doors, lights, etc.). Qualifications Diploma (or equivalent education) in an appropriate engineering discipline from an accredited college, institute or university. 3+ Years Experience in the similar field. Experience and proficiency in MicroStation and InRoads, OpenRoads, OpenRail, or other BIM Software (AutoCAD, Civil3D, Geopak, etc.) Engineer in Training Certification (EIT) Additional Information AECOM provides a wide array of compensation and benefits programs to meet the diverse needs of our employees and their families. We also provide a robust global well-being program. We’re the world’s trusted global infrastructure firm, and we’re in this together – your growth and success are ours too. As an Equal Opportunity Employer, we believe in each person’s potential, and we’ll help you reach yours. Join us and let’s get started. #LI-FS1

Work with Us. Change the World. At AECOM, we're delivering a better world. Whether improving your commute, keeping the lights on, providing access to clean water, or transforming skylines, our work helps people and communities thrive. We are the world's trusted infrastructure consulting firm, partnering with clients to solve the world’s most complex challenges and build legacies for future generations. There has never been a better time to be at AECOM. With accelerating infrastructure investment worldwide, our services are in great demand. We invite you to bring your bold ideas and big dreams and become part of a global team of over 50,000 planners, designers, engineers, scientists, digital innovators, program and construction managers and other professionals delivering projects that create a positive and tangible impact around the world. We're one global team driven by our common purpose to deliver a better world. Join us. Performs complex BIM or Plant Data Centric assignments involving the use of multiple application platforms, such as Revit, Intergraph SmartPlant, Plant 3D, etc. software, to achieve set results and deadlines Works under general direction. Responsible for providing leadership and direction of specific BIM technologies to assigned project teams. Develops technical solutions to wide range of difficult problems. Independently determines and develops approach to solutions. Perform complex assignments involving the use of multiple application platforms and complex systems including Revit software to achieve set results and deadlines. Qualifications BA/BS + 6 YORE or demonstrated equivalency of experience and/or education Diploma / BE Electrical & Electronics with >8 years' experience post qualification. Experience in Civil 3D software tool Work experience in ME Urban Infrastructure Design works (prefer Dry Utilities design experience in consulting firms) Good knowledge of Revit is added advantage Strong communication skills in English is desirable. Experience of managing BIM & CAD teams is highly desirable. Additional Information AECOM provides a wide array of compensation and benefits programs to meet the diverse needs of our employees and their families. We also provide a robust global well-being program. We’re the world’s trusted global infrastructure firm, and we’re in this together – your growth and success are ours too. As an Equal Opportunity Employer, we believe in each person’s potential, and we’ll help you reach yours. Join us and let’s get started. #LI-FS1

Blue Star Ltd is looking for Project Construction Engineer to join our dynamic team and embark on a rewarding career journey Oversee and manage construction projects from planning to completion. Ensure compliance with building codes, regulations, and safety standards. Collaborate with architects, contractors, and other stakeholders. Monitor project progress and address any issues or delays. Prepare and manage project budgets and schedules. Conduct site inspections to ensure quality and adherence to plans. Provide technical guidance and support to project teams.

Create Piping Layout, Plans, Equipment Layouts, Piping BOM, Supports and Isometrics using AutoCAD 2D Collect data from sites and prepare drawing Understand PMS,VMS & P& ID. Proficiency in ADSK Plant3D/Cadworks software will be an added advantage. Provident fund

Piping Engineer Job Description : Able to produce Equipment & Piping, Piping Support Layout, Isometrics & Material Take-off from Softwares like Plant 3D, AvevaE3D or Revit etc. Able to guide 3D Modeler on Single line pipe routing for Equipment Layout, Support marking, Support detailing, Isometric drawings to meet project schedule and submittal requirement. Knowledge on ASME B31.3 Process Piping Code /B 31.1 Power Piping Code Participate in 3D model reviews from concept to completion and know concepts of flexibility in pipe routing. Perform Pipe support span length calculation and review 3D Model. Coordinating complicated work with professional engineer in various regions, cross functional disciplines like Project Engineering/Mechanical Design/Piping/E&I Engineering. Proficient to guide 3D Modellers, PFD/PID Review, Equipment Layout/Single Line Pipe Routing design, 2D drawings extraction- Isometrics/Piping & Pipe Support Layout, Bill of Quantity, Support spacing(Metallic & Non-Metallic lines), identifying clashes & resolving the same. Able to manage a small team of designers, or technical leads. Good To Have Requirements (That Supports future Career progression in the Role) Review and sign off Structural drawings against 3D Model, Client Specification for correctness and fabricatability. Experience on Troubleshooting complex problems related to manufacturing and activities that occur on site & PROJECT. Shall act as a Technical coach and mentor to the team. Direct & supervise Layout and Piping engineers providing expertise and ensures the application of correct standards in the design and development of projects. Knowledge on ASME B36.10M, ASME B36.19M, ASME B16.9, ASME B16.20, ASME B16.5, ASME B16.11, B16.25, ASME B16.10.Knowledge on API 617, API 618, API 612,MSS SP-58,BS 6501, NFPA 1963. Knowledge on GOST 32388-2013 Process Piping Stress Analysis, GOST 32569-2013 Process Piping Design, RD 10-249-98 Power Piping. Design and Stress Analysis

We are seeking a skilled and detail-oriented Piping Engineer to join our engineering team. Designing, analyzing, and implementing piping systems for industrial projects, ensuring compliance with industry standards and client specifications.

Role & responsibilities Designing piping systems based on project specifications, including layout planning and material selection. Creating detailed engineering drawings and isometric diagrams using CAD or 3D modeling tools. Conducting stress analysis to ensure the system can withstand pressure, temperature, and environmental conditions. Coordinating with multidisciplinary teams , including civil, mechanical, and electrical engineers, to integrate piping systems into the overall project. Overseeing installation and construction activities on-site to ensure adherence to design and safety standards. Inspecting and testing piping systems for leaks, strength, and compliance with codes and regulations. Managing procurement of piping materials and components, ensuring timely delivery and quality control. Maintaining documentation such as test reports, inspection logs, and as-built drawings for project records. Preferred candidate profile BE Mechanicals with Construction Industry Experience

Job Description -: Design Manager Desired profile & experience: - Above 12+ years relevant work experience, 3 of which must be as a Managerial role in Oil and Gas industry. Software skill: PDMS, E3D, SP3D Specific Core Competencies and Skills required: Skilled in own discipline Project Management fundamentals Team leadership skills Personal attitude needed: Target-oriented Coaching attitude Proactive approach Job Description -: Input to own Line Manager to ensure availability of correct competence (for example internal and external recruitment) • Service and work process development for own team: • Develop efficient design methods and tools • Ensure cost-efficient design • Integration and connectivity of designed solutions/products to other disciplines • Right quality and functionality of designed solutions/products • Fulfilment of stated requirements • Competence development & resource management within own team • Performance management for own team Prepare the work assignment and monitoring plan for the Basic/Detail engineering team to ensure the alignment with the project objectives, schedule, quality and budget. Report the concerns in the project such as the project budget and its allocation, resourcing, competence requirements to ensure project execution within the required time and budgeted hours to the Line Manager. Lead the project team to ensure the resolution of discipline issues in a timely and effectively manner. Verify and manage contractual requirement and inputs for the design works in the project. Assign the design work like, deliverable and activities to each engineer and distribute necessary information to execute his design engineering work. Coordination with other disciplines, client, vendors and engineering subcontractors to ensure design engineering work and output will meet the project objectives. Understand and discuss the special requirements of the project with the team to propose alternate solution and cost down ideas. Propose alternatives to client with technical justification. (Value Engineering concept) Responsible for Preparation/updation of list of deliverables for different activities in the project. Development of the LE within the team.

1. Ensure quality of installation at Project Sites. 2. Effectively mobilize available resources and strive for on time project completion. 3. Equipment Testing for performance with reference to design and specifications. 4. Ensure smooth handing-over projects, complete with all documentation, drawings, manuals, measurements, test reports, test certificates etc Qualifications: BE in Electrical Engg

*Piping Engineer - Drilling - Rig Experience mandatory - 6 to 17 years Budget between 12 to 20 LPA Should be currently working on Rigs This position is office based. NO PIPELINE experience. Total Vacancies: 50 Job Location: Navi Mumbai OR Vizag OR Hyderabad OR Bangalore - Multiple job options Detailed Design Engineering experience mandatory in Drilling. Should have hardcore experience from the below skill set (Any one) Land Rigs Submersible Rigs Jack-up Rigs Platform Rigs Semi-submersible Rigs Drill Ship Rigs Mode of interview will be Teams ONLY Full Time B.E / B.Tech mandatory.

Job Requirements Job Description: Piping Engineer We are currently seeking a highly skilled and experienced Piping Engineer to join our team at Quest Global. As a Piping Engineer, you will play a crucial role in the design, development, and implementation of piping systems for various energy projects. Responsibilities: - Collaborate with project teams to understand project requirements and objectives. - Design and develop piping systems, ensuring compliance with industry standards and regulations. - Conduct feasibility studies and analyze technical specifications to determine the most suitable piping solutions. - Prepare detailed engineering drawings, including isometric and orthographic views. - Perform stress analysis and calculations to ensure the integrity and safety of piping systems. - Coordinate with other engineering disciplines to ensure seamless integration of piping systems. - Review and approve vendor documents and drawings. - Conduct site visits and inspections to monitor the installation and performance of piping systems. - Troubleshoot and resolve any issues or discrepancies that may arise during the design, construction, or operation phases. - Stay updated with the latest advancements in piping technology and industry best practices. Work Experience Requirements: - Bachelor's degree in Mechanical Engineering or a related field. - Proven experience as a Piping Engineer in the energy industry. - Strong knowledge of piping design principles, codes, and standards (ASME, ANSI, API, etc.). - Proficiency in using piping design software (AutoCAD, SolidWorks, etc.). - Familiarity with stress analysis software (CAESAR II, ANSYS, etc.). - Excellent analytical and problem-solving skills. - Strong attention to detail and accuracy. - Effective communication and interpersonal skills. - Ability to work independently as well as in a team environment. - Professional engineering license is preferred. Join our dynamic team and contribute to the success of our energy projects as a Piping Engineer. Apply now and be part of our innovative and forward-thinking company, Quest Global.

Job Title: Piping Engineer / Piping Stress Engineer / Senior / Lead Piping Engineer Experience: 5 to 15 Years Location: Bengaluru Job Description: We are hiring Piping Engineers and Stress Analysts at various experience levels to support detailed engineering and design for oil & gas, petrochemical, or industrial projects. The ideal candidates should have expertise in piping layout, stress analysis, material specifications, and familiarity with tools like CAESAR II, AutoPIPE, and Navisworks. Key Responsibilities: Perform piping layout and routing as per project requirements Conduct piping stress analysis and prepare stress reports Review isometrics, support design, and interface with structural teams Ensure compliance with international codes (ASME, API, etc.) Lead and mentor junior engineers (for senior/lead roles) Preferred Background: B.E./B.Tech in Mechanical Engineering with strong EPC or oil & gas project exposure. Be part of a high-performing engineering team in Bengaluru delivering world-class piping solutions!

Business- Gas Function- Detail Engineering Department- Project Management Role Piping Engineer - Mechanical. 1) Role Purpose- This role will be responsible for contributing to the design and development of mechanical systems and components and supporting on time delivery of projects. 2) Education Requirement- • Bachelors degree in Chemical / Mechanical / Piping engineering in the relevant discipline or equivalent. 3) Experience (In Years) 4- 8 Yrs (Experience is required from Oil & Gas industry) 3) Key Skills Required Knowledge of Piping and pressure vessels codes and standards. Working knowledge of design of Pressure vessels. Knowledge of Pressure vessel, pipe fittings, flange & valve components. Working knowledge of MS Office, ISO 9000 & QHSE. Working knowledge of design of Piping sizing, pressure drop, GAD review , ISOMETRIC review, PIPING MTO review. Ability to read and interpret technical drawings, schematics, and specifications Ability to work independently and adapt to changing priorities and deadlines. 4) Key Responsibilities / Tasks / Activities Prepare technical documentation with minimal revisions to meet desired delivery schedule Create designs which match customer requirements using mechanical codes and standards Timely respond to non-conformities and maintain the same for further analysis Collaborate with purchase, external vendors for timely BOM preparation Timely issuance of production orders to achieve scheduled delivery date Provide support in identifying and listing product varieties to help standardize key products Actively follow 5S procedures and Participate in 5 S / kaizen / System Improvement activities Preparation of Line Blank Thickness Calculation. Familiar with Material Grades ASTM, ASME, API, etc. Knowledge in Testing and Inspection Requirements for Piping Components and Valves Compliance with Specifications and Industrial Quality Standards. Coordinate with Civil/Structural & Mechanical groups to ensure loads are being effectively communicated. Perform reinforcement evaluation at pipe supports and branch connections. Prepare project piping support specification & Design Basis. Perform Procurement Engineering within stipulated time frame of the project. Coordinate with vendors, subcontractors, third party consultants, etc. to ensure timely review of documents and that comments are made with required quality level. Kindly find below link for candidate portal registration process. URL: https://hrms.nirmal.co.in/candidateportal/ Page 1 of 2

Mega Walk-in @ Chennai on 21st June 2025 (Saturday) PIPING ENGINEER - 10 NOS. EXPERIENCE : 5 to 10 years LOCATION : HYDERABAD / BANGALORE / CHENNAI Interview Venue : Quest Global Engineering Services Pvt Ltd, 6th floor, IndiQube Alpine, behind Ekkattuthangal Metro Station, Labour Colony, SIDCO Industrial Estate, Guindy, Chennai, Tamil Nadu 600032 Job Description : Roles & Responsibilities: Should have hands-on experience in Piping Detailed Design Engineering from the Package or Accessory piping systems of Power Plants. Should able to understand the ITO inputs (Inquiry to Order) Technical Proposal (Project Contracts) Should have extensive review and understanding experience in Schematics (P&ID) and Instruments (e.g. Air systems - Inlet Bleed Heating, Cooling & Sealing Air, Fuel Gas Systems, and Water systems and Oil System and also associated instrumentation). Should have very good experience in Piping, Tubing and all associated fittings, Should have experience in developing new Arrangement drawings & BOM in line with P&ID (Schematics) which inclusive of Valves and all process equipments Should have very good experience in Preparing Modification Kit and FMI (Field Modification Instruction manual) for Field support. Should have experience in Piping Support & structural engineering calculations as project needed. Should have demonstrated ownership & decision-making of the design, considering cost, feasibility in manufacturing and fabrication. Should have served as primary interface with customers and have demonstrated the implementation of design requirements, design changes, analysis, and verification of each task. Planning the tasks, executing, and delivering on time, with cost effective and 100% quality. Should have excellent Coordination skills with all Cross-Functional Teams such as (Tech Leads, Chief Engineers), Suppliers, Configuration Team, Electrical Team etc. Engineers should have confidence with autonomy to deliver as work package is critical Qualification: BE/B.Tech/ME/M.Tech in Mechanical with 6 to 10 Years of experience from Thermal /Aero/Simple/Combined Cycle Power Plant Experience Interested Candidates can send the resume to fakkrudeen.aliahamed@quest-global.com

Mega Walk-in @ Hyderabad on 21st & 22nd June 2025 (Saturday & Sunday) PIPING ENGINEER - 10 NOS. EXPERIENCE : 5 to 10 years LOCATION : HYDERABAD / BANGALORE / CHENNAI Interview Venue : QuEST Global Engineering Services Private limitedQGESPL Tower 8 , Fourth Floor, GAR Corp, IT-ITES SEZ Survey No. 89, Kokapet Village Gandipet Mandal Rangareddy District Telangana-500075 Job Description : Roles & Responsibilities: Should have hands-on experience in Piping Detailed Design Engineering from the Package or Accessory piping systems of Power Plants. Should able to understand the ITO inputs (Inquiry to Order) Technical Proposal (Project Contracts) Should have extensive review and understanding experience in Schematics (P&ID) and Instruments (e.g. Air systems - Inlet Bleed Heating, Cooling & Sealing Air, Fuel Gas Systems, and Water systems and Oil System and also associated instrumentation). Should have very good experience in Piping, Tubing and all associated fittings, Should have experience in developing new Arrangement drawings & BOM in line with P&ID (Schematics) which inclusive of Valves and all process equipments Should have very good experience in Preparing Modification Kit and FMI (Field Modification Instruction manual) for Field support. Should have experience in Piping Support & structural engineering calculations as project needed. Should have demonstrated ownership & decision-making of the design, considering cost, feasibility in manufacturing and fabrication. Should have served as primary interface with customers and have demonstrated the implementation of design requirements, design changes, analysis, and verification of each task. Planning the tasks, executing, and delivering on time, with cost effective and 100% quality. Should have excellent Coordination skills with all Cross-Functional Teams such as (Tech Leads, Chief Engineers), Suppliers, Configuration Team, Electrical Team etc. Engineers should have confidence with autonomy to deliver as work package is critical Qualification: BE/B.Tech/ME/M.Tech in Mechanical with 6 to 10 Years of experience from Thermal /Aero/Simple/Combined Cycle Power Plant Experience Interested Candidates can send the resume to fakkrudeen.aliahamed@quest-global.com

Mega Walk-in @ Bangalore on 21st June 2025 (Saturday) PIPING ENGINEER - 10 NOS. EXPERIENCE : 5 to 10 years LOCATION : BANGALORE Interview Venue : QuEST Global Engineering Services Private Limited PRIMROSE 7B, 2nd Floor, Embassy Tech Village, Sarjapura Marathahalli Outer Ring Road, Devarabeesanahalli, Bengaluru 560103, India Job Description : Roles & Responsibilities: Should have hands-on experience in Piping Detailed Design Engineering from the Package or Accessory piping systems of Power Plants. Should able to understand the ITO inputs (Inquiry to Order) Technical Proposal (Project Contracts) Should have extensive review and understanding experience in Schematics (P&ID) and Instruments (e.g. Air systems - Inlet Bleed Heating, Cooling & Sealing Air, Fuel Gas Systems, and Water systems and Oil System and also associated instrumentation). Should have very good experience in Piping, Tubing and all associated fittings, Should have experience in developing new Arrangement drawings & BOM in line with P&ID (Schematics) which inclusive of Valves and all process equipments Should have very good experience in Preparing Modification Kit and FMI (Field Modification Instruction manual) for Field support. Should have experience in Piping Support & structural engineering calculations as project needed. Should have demonstrated ownership & decision-making of the design, considering cost, feasibility in manufacturing and fabrication. Should have served as primary interface with customers and have demonstrated the implementation of design requirements, design changes, analysis, and verification of each task. Planning the tasks, executing, and delivering on time, with cost effective and 100% quality. Should have excellent Coordination skills with all Cross-Functional Teams such as (Tech Leads, Chief Engineers), Suppliers, Configuration Team, Electrical Team etc. Engineers should have confidence with autonomy to deliver as work package is critical Qualification: BE/B.Tech/ME/M.Tech in Mechanical with 6 to 10 Years of experience from Thermal /Aero/Simple/Combined Cycle Power Plant Experience Interested Candidates can send the resume to fakkrudeen.aliahamed@quest-global.com

Structural Engineering Engineer 5 to 10 years of experience Senior Engineer 10 to 15 years of experience Lead Engineer – 15 to 20 years of experience E3D Administrator – 10 to 15 years of experience E3D Modeler – 5 to 15 years of experience Piping Engineering Stress Engineer – 5 to 10 years of experience Senior Stress Engineer – 10 to 15 years of experience Lead Stress Engineer – 15 to 20 years of experience Piping Engineer – 5 to 10 years of experience Piping Designer – 10 to 15 years of experience E3D Administrator – 15 to 20 years of experience Electrical & Telecom Engineering Engineer – 5 to 10 years of experience Lead Engineer / Section Head – 20 to 25 years of experience Designer / Quality Checker – 10 to 15 years of experience E3D Administrator – 10 to 15 years of experience E3D Modeler – 5 to 15 years of experience Control & Instrumentation Engineering Engineer – 5 to 10 years of experience Senior Engineer – 10 to 15 years of experience Lead Engineer – 15 to 18 years of experience Designer / Quality Checker – 10 to 15 years of experience E3D Administrator – 10 to 15 years of experience E3D Modeler – 5 to 15 years of experience Project Management & Control Project Engineer – 5 to 15 years of experience Project Control Engineer – 11 to 15 years of experience Interface & Information Management Engineer – 10 to 15 years of experience Project Engineering Manager – 15 to 20 years of experience

JOB REQUISITES Role Summary WSP India is currently seeking an Sr. Engineer - Piping / Mechanical(Packages) for Australia Mining Infrastructure Projects (Materials Handling Infrastructure). They shall be responsible for engineering design of Piping, static & rotary equipment in compliance with WSP Engineering and Client Standards. Previous experience in an EPCM environment in the O & G, Power plant, Chemical process plant, Mining processing industry is an asset. A Team player and willing to work collaboratively with a motivated and highly successful team in Australia. The position will be for Bangalore/Noida/Mumbai location. Responsibilities This role is for a Sr. Engineer-Mechanical (Packages) on mining projects. In-depth knowledge of piping design codes and standards, such as ASME B31. 3, ASME B31. 4, and ASME B31. 8. Knowledge of process engineering principles and equipment specifications. Understanding of fabrication and construction techniques for piping systems. Knowledge of international codes and standards, mainly ASME VIII div. 1/2, API and TEMA. Design and develop piping systems and components for various, Review detailed piping layout drawings, including isometrics and bill of materials. Collaborate with the project team to ensure compliance with project specifications and industry standards. Engineering & design experience in rotary machinery to provide expert guidance in the selection, specification of rotating equipment like pumps, compressors, and blowers. Responsibilities include reviewing design specifications, vendor management, technical evaluations, and ensuring compliance with industry standards. The ideal candidate will have in-depth knowledge of API standards and rotating equipment lifecycle. Engineering & design experience in Pressure vessels, heat exchangers, tanks, pumps, compressors, blowers, piping system, pipe supports, pipe support structures. steel & RC structures, preparation / review of detailed. Preparation of Pipe wall thickness calculations including external pressure calculation, branch chart calculations and line blanks. Development of project standards, technical specifications for piping materials with minimum supervision. Preparation of Valve Material Specifications, Preparation of datasheets for all piping special items like special valves, strainers, traps, sight glass, bellows, hoses, etc. Preparation of RFQs for piping bulk items, valves, specialty items, etc Carrying out technical evaluation of vendor offers against RFQs for all piping material; preparation of both technical evaluation and commercial comparison; Preparation of technical bid study reports for static, rotary, valves, piping specialties, etc. Assisting in all interfacing, engineering, and construction groups in the area of piping material. Able to resolve all piping material related bottlenecks in project. Extraction and handling Piping MTO for the project. Develop inspection and testing plans (ITPs) for tanks and vessels, including hydrostatic and non-destructive testing (NDT). Must complete a high-quality self-check of own work with efficiency. Shall follow internal QC processes. Reporting progress of work assignment to immediate supervisor. Understands the project schedule and budget requirements. Communicate with internal peers and project team and required to answer questions regarding deliverables. Capable of multi-tasking and managing multiple projects with the ability to accurately predict the time required to fulfil the individual scopes of work required. Coordinating with Australian lead offices as per project requirement. Actively participate in the design and provide input to the design team throughout the design process. Ensuring that quality procedures are implemented and maintained. Provide regular work status updates, including risks or concerns, to Lead Engineer or project manager in AU. Ensure that Health & Safety is embedded into all work practices in line with company policies. Support the company s approach to sustainability. Be able to communicate in a multi-disciplinary project team. Be willing to learn and be polyvalent. Identify improvements (where possible) to enhance WSP service to clients. Complete accurate timesheets by set deadline. Client / External focus Maintain strong colleague relationships and contribute to the teams performance of client satisfaction. Contribute to knowledge sharing in internal and external forums. Remain up to date with market and competitor knowledge. Key Competencies Mandatory Skills We anticipate you will have an interest in the following areas: You will also be computer literate with a reasonable proficiency in MS office suite and Navisworks. Having a thirst for knowledge, cultural awareness, an open mind, and good English communication skills are essential, along with the ability to work as part of a team. Coordinating his/her work with other members of the Team. Work competently with minimal supervision or on an individual basis. The candidate must have a valid passport. Key competencies expected are: Collaboration & Teamwork Technical Capability & Delivery Adaptability & Learning Desired Skills Strong preference will be given to candidates with Australian experience Preference will be given to candidates with minimum 10-14 year of experience in a consulting firm in an EPCM environment in the O & G, Power, Mining processing industry is an asset. Preference will be given to candidates with engineering design as well as shop detailing experience of Chutes, Bins, Hoppers, and conveyor components. E. g. trusses Ability to work in a fast-paced environment with strict deadlines. Ability to work well as part of a team or on an individual basis. Qualifications 10-14 years of experience in piping, static, rotary equipment engineering. Minimum of a bachelor s degree & preferred master s degree in mechanical engineering. PG diploma or certificate in Piping engineering would be an asset. Strong organizational, technical, and communication skills. Strong attention to the detail. Familiar with working in a LEAN environment. Experience with projects in Australia, New Zealand would be an advantage. Excellent written and verbal communication skills, in English. P. ENG qualification would be an added advantage.

Looking for challenging role If you really want to make a difference - make it with us Can we energize society and fight climate change at the same time At Siemens Energy, we can. Our technology is key, but our people make the difference. Brilliant minds innovate. They connect, create, and keep us on track towards changing the world’s energy systems. Their spirit fuels our mission. Our culture is defined by caring, agile, respectful, and accountable individuals. We value excellence of any kind. Sounds like you Your new role – challenging and future- oriented Perform piping stress analysis using CAESAR II / Rohr2 / Autopipe. Evaluate thermal expansion, seismic, wind, steam hammer, and other dynamic loads on piping systems. Ensure compliance with ASME B31.1, B31.3, and other relevant codes and standards. Review and interpret piping and instrumentation diagrams (P&IDs), isometrics, and general arrangement drawings. Collaborate with piping designers, civil/structural engineers, and project managers to resolve stress-related issues. Prepare technical reports, stress analysis documentation, and support design reviews. Provide input on pipe support design and selection. Participate in field walkdowns and support construction and commissioning activities. Interface with clients and vendors to ensure technical requirements are met. Ability to work efficiently and effectively when managing multiple tasks Must be self-motivated, results oriented, and be flexible to work well under tight schedules in a fast-paced team environment. We don’t need superheroes, just super minds Bachelor’s degree in Mechanical Engineering or related field. 5–10 years of relevant experience in piping stress analysis, preferably in the power industry. Proficiency in CAESAR II, Rohr2 or AutoPIPE. Strong understanding of piping materials, supports, and layout principles. Familiarity with power plant systems (e.g., steam, condensate, feedwater, cooling water). Knowledge of international codes and standards (ASME, ANSI, API, etc.). Excellent analytical, communication, and teamwork skills. We’ve got quite a lot to offer. How about you This role is based at Site (Gurgaon). You’ll also get to visit other locations in India and beyond, so you’ll need to go where this journey takes you. In return, you’ll get the chance to work with teams impacting entire cities, countries – and the shape of things to come. We’re Siemens. A collection of over 379,000 minds building the future, one day at a time in over 200 countries. We're dedicated to equality, and we welcome applications that reflect the diversity of the communities we work in. All employment decisions at Siemens are based on qualifications, merit and business need. Bring your curiosity and imagination and help us shape tomorrow.

Design piping systems that facilitate the transfer between different systems prioritizing safety and reliability knowle about every facet of piping design meticulous attention is required to prevent fail mitigate associated risks, create blueprints. Required Candidate profile Designing piping system and choosing appropriate material Evaluating and testing piping system to guarantee safety Preparing and assessing engineering support for on-site construction activity

Qualification: B.E/B.Tech. or M.E/M.Tech. in Mechanical Engineering. Industry : Fertilizer/Petrochemical/oil and gas plants Software Proficiency: Working knowledge of CAD tools such as E3D, SP3D/PDMS, PDS, MicroStation, and AutoCAD. Only Design Engineering profiles are accepted; Onsite/Field profiles are not considered. Responsibilities: Lead and oversee Basic & Detail Piping design engineering activities for projects. Develop piping layouts, isometrics, and general arrangements ensuring compliance with project specifications, Piping materials, Codes, and standards. Perform piping stress analysis using tools like Caesar II to validate design integrity and optimize piping systems. Review and approve Statutory approval drawings/documentation for piping systems. Provide guidance and technical expertise in piping design, material selection, and installation methods. Coordinate with other Engineering disciplines to integrate piping designs into overall plant design. Mentor and train junior engineers and designers in piping design principles, Codes, and standards. Collaborate with vendors, contractors, and suppliers to ensure quality and timely delivery of piping components. Utilize CAD tools such as E3D, SP3D/PDMS, PDS, MicroStation, and AutoCAD for modeling, analysis, and design work. Participate in project meetings, design reviews, and coordination activities with project stakeholders. Ensure adherence to project schedules, budgets, and quality standards for piping design deliverables. Conduct technical evaluations, feasibility studies, and risk assessments for piping systems. Support site activities, inspections, and troubleshooting related to piping installations as needed. Additional Skills: Proficiency in Piping materials, Codes, and standards relevant to the industry. Strong knowledge of Statutory approval drawings/documentation processes. Experience in piping stress analysis using tools like Caesar II. Leadership skills with the ability to guide and train a team of engineers and designers. Excellent communication, teamwork, and collaboration abilities. Analytical mindset with problem-solving skills and attention to detail. Adaptability and willingness to learn and apply new technologies and methodologies in piping engineering. Familiarity with Quality, Environmental, Health, and Safety (QEHS) standards and regulations is a plus. Follow our LinkedIn page for more information