1843 Navisworks Jobs - Page 7

🏗️ Junior Architecture & Civil BIM Engineer – Noida 🔹 About the Role A BIM specialist with 2–3 years of experience in architectural and civil industrial projects, skilled in creating detailed models, drawings, and technical documents using Autodesk tools. Supports coordination across teams to ensure design clarity and construction efficiency. 🔹 Main Responsibilities Develop and maintain BIM models using Revit and AutoCAD Assist in resolving design clashes with MEP and structural teams Help prepare construction drawings and quantity take-offs Update models based on design changes or site inputs Ensure compliance with codes and standards (e.g. IS, NBC, GMP) Manage documentation workflows and version control 🔹 Key Skills Autodesk Revit and AutoCAD Navisworks (basic to intermediate for clash detection) Construction drawing and detailing knowledge Familiarity with IS codes and project coordination processes Collaborative mindset and ability to work across teams 🔹 Location Based in Noida

About Godrej Properties Limited Godrej Properties brings the Godrej Group philosophy of innovation, sustainability, and excellence to the real estate industry. Each Godrej Properties development combines a 125-year legacy of excellence and trust with a commitment to cutting edge design, technology, and sustainability. In FY 2021, Godrej Properties emerged as the largest developer in India by the value and volume of residential sales achieved. Godrej Properties has deeply focused on sustainable development. In 2010, GPL committed that all of its developments would be third party certified green buildings. In 2020,2021 and again in 2022, the Global Real Estate Sustainability Benchmark ranked GPL #1 globally amongst listed residential developers for its sustainability and ESG practices. In 2017, GPL was one of the founding partners of the Sustainable Housing Leadership Consortium (SHLC), whose mission is to spread sustainable development practices across the Indian real estate sector. In recent years, Godrej Properties has received over 300 awards and recognitions, including the Porter Prize 2019, The Most Trusted Real Estate Brand in the 2019 Brand Trust Report, Builder of the Year at the CNBC-Awaaz Real Estate Awards 2019, and The Economic Times Best Real Estate Brand 2018. Job Title: Virtual Design and Construction (VDC) Manager Location: GPL HO, Mumbai Department: Design Reports To: Head of BIM Experience Required: 7–12 years (with at least 3+ years in a BIM/VDC management role) Role Overview A VDC Manager leads the deployment and execution of Virtual Design & Construction (VDC) and BIM processes—from pre-construction through field delivery and closeout. You'll oversee digital modeling, multi-disciplinary coordination (3D/4D/5D), clash detection, and model-based logistics planning, ensuring seamless integration across teams and technologies Key Responsibilities BIM Leadership & Management Develop and enforce VDC and BIM execution plans across projects. Lead BIM coordination meetings, clash detection, and resolution processes. Act as the primary point of contact for all BIM/VDC-related matters across internal and external stakeholders. Explore & lead POCs of new technology solutions. Project Integration Collaborate with design, planning, construction, and MEP teams to integrate VDC workflows. Oversee 3D, 4D, 5D modeling implementation (design, scheduling, costing). Process & Standards Ensure adherence to company and industry BIM standards (e.g., ISO 19650, National BIM Standards). Set up and manage Common Data Environment (CDE) platforms like Autodesk Construction Cloud, BIM 360, or similar. Team & Training Lead and mentor BIM Coordinators/Modelers. Conduct internal training on VDC tools and processes to upskill teams. Technology Management Evaluate and implement VDC tools such as Revit, Navisworks, Synchro, AutoCAD, Rhino, Dynamo, etc. Support integration of technologies like AR/VR, laser scanning, drones, and digital twins. Reporting & Documentation Maintain model audit reports, clash reports, and model health check logs. Prepare progress dashboards for management and client reporting. Field Integration & Issue Resolution Act as liaison between field crews and digital teams to resolve onsite installation conflicts. Convert BIM designs into fabrication models, spool drawings, and field install documents Required Skills & Qualifications Bachelor’s/Master’s in Architecture, Civil Engineering, Construction Management, or equivalent. 7+ years’ experience in AEC industry with strong BIM/VDC project delivery exposure. Advanced proficiency in Autodesk Revit, Navisworks, and coordination tools. Working knowledge of scheduling (Primavera/MSP) and cost integration tools is a plus. Strong understanding of ISO 19650 or similar BIM standards. Excellent communication, team management, and cross-functional coordination skills. An inclusive Godrej Before you go, there is something important we want to highlight. There is no place for discrimination at Godrej. Diversity is the philosophy of who we are as a company. And has been for over a century. It’s not just in our DNA and nice to do. Being more diverse - especially having our team members reflect the diversity of our businesses and communities - helps us innovate better and grow faster. We hope this resonates with you. We take pride in being an equal opportunities employer. We recognize merit and encourage diversity. We do not tolerate any form of discrimination on the basis of nationality, race, color, religion, caste, gender identity or expression, sexual orientation, disability, age, or marital status and ensure equal opportunities for all our team members. If this sounds like a role for you, apply now! We look forward to meeting you.

Job Tittle-Architect Engineer Location-Navi Mumbai • Core competency in Architectural designs, master planning, space planning and should have ability and hands on experience to work on schematic/statutory/ working drawings and 2D /3D, Presentation, • Preparation of Item description and Specification for Arch BOQ Items for Tender, including cost estimates • Shall have knowledge of statutory regulations, LEED/ IGBC certifications requirements, hygiene, and sustainability related design concepts/requirements. • Global architectural practices / domain knowledge preferable to be able to check & review our global engineering partner’s drawings & documents. • Shall have ability to evaluate the scope of works, efforts to completion, change management, Design coordination with all other disciplines. • Shall be able to extract and gather the inputs required from other discipline to develop the master plan/ plot plan , Architectural layouts • Shall be able to guide and mentor the team, identifying and imparting training to enhance the skills and capabilities. • Ensures and drives Company policies and Project Objectives • Basic knowledge of Interior design and Landscape Role / Job description 1. Mentors, trains & encourages resources within discipline to achieve desired project objectives. 2. Participates and Represents in all Client facing and critical meetings to provide solutions to meet project objectives. 3. Proactive review of Resource utilization and resource planning in the disciplines to ensure the productivity levels. 4. Review and validation of Inputs given to other discipline to reduce internal rework. 5. Conduct Independent design review, Technical Audits and participate in external Audits. 6. Monitor and review the performance of Discipline team members and providing the constructive feedback for continuous improvement. 7. Drive and ensures system compliance requirements as per processes and procedures and compliance to SOPs. 8. Ensures and drives knowledge sharing, lesson learned and technical knowledge Data base creation and updating the same. 9. Shall be able to develop Façade & Fenestration, Interiors, Sanitation and plumbing conceptualization to detail engineering including options for look and feel, walkthroughs, presentations etc. 10. Conceptualization, preparation of various options meeting the Uptime Institute’s Tier standards. 11. Techno commercial evaluation of various options and recommending / finalizing the option to be adopted for the project 12. Preparation of Design Basis Report & Room Book 13. Planning / guiding a team of Revit modelers in developing BIM model meeting LOD 100 to 350 requirements during various phases of the projects. 14. Reviewing the model / ensuring quality control on the model / guiding the modelers in extracting layouts from the 3D model like Architectural Plans, elevations, sections, plumbing drawings 15. Preparation of cost estimation for architectural part of the project 16. Procurement assistance like providing technical clarifications, participating pre bid / post bid meeting / technical bid analysis / preparation or order specification. 17. Vendor drawing review. 18. Providing clarification to request for information from site during construction. 19. Visiting sites for residual engineering / resolving site queries 20. Coordination with various stake holders like Client / various internal disciplines like projects / electrical / mechanical / civil / vendors for effective engineering management 21. Ensuring Architectural engineering execution within the budget / on time / meeting the quality set for the project and to the satisfaction of all the stake holders 22. Providing Management Information for the Architectural engineering part of the project 23. Providing information for & Attending Project review meeting / Internal review meetings / Management review meetings 24. Training of engineers in data center on Architectural engineering, Preparation of Architectural engineering effort estimation Skills • Positive attitude, excellent customer communications skills and the ability to act on own initiative with a strong commitment to customer service. • Ability to present highly complex topics in an understandable manner. • Detailed knowledge of standards, codes and procedures and ability to transmit the same to others. • Deep understanding of performance, reliability, scalability, security, and reusability tactics and strategies. • Extensive knowledge in architectural design, strong knowledge of architectural governance. • Developed knowledge of Sustainable Design principles. • Working knowledge of Auto Cad, Revit arch., Google sketch-up, etc. 3D software. • Team build and strong relationship with down streams. • Ability to identify integration patterns and points between various design areas and should be able to track the implementation of integrations. Software Competency AutoCAD is essential. Working knowledge of Revit Architecture, Navisworks, Photoshop, 3D Max & or Google Sketch- up shall be preferred. Language Competency Good English written and verbal skills & ability to interact / coordinate. in a global environment are essential. Interested candidates can contact on below number and send mail 6267776090 purvi.samaiya@ipstechinc.com

4D/5D BIM Specialist Key Responsibilities: 🔹 4D Planning (Time-Based Simulation) • Integrate project schedules with 3D models to create 4D simulations using Synchro Pro • Develop construction sequencing animations to visualize project timelines • Conduct scenario analyses to identify potential scheduling conflicts and optimize workflows 🔹 5D Planning (Cost Estimation) • Link cost data to 3D/4D models for real-time budget tracking and forecasting • Collaborate with quantity surveyors to ensure accurate cost estimations • Generate cost reports and support value engineering processes 🔹 Model Coordination & Clash Detection • Perform clash detection to identify and resolve design conflicts • Ensure BIM models are accurate, consistent, and adhere to project standards • Coordinate with various stakeholders to maintain model integrity throughout the project lifecycle 🔹 Digital Twin Implementation • Develop and manage digital twins for real-time monitoring and predictive maintenance • Integrate IoT sensor data into BIM models to enhance asset management • Utilize platforms like Bentley Systems for infrastructure and construction projects 🔹 Stakeholder Collaboration & Reporting • Lead BIM coordination meetings and workshops with clients, architects, and contractors • Prepare and present visualizations, reports, and animations to communicate project progress • Provide training and support to team members on 4D/5D BIM tools and processes 🧰 Essential Skills & Tools • Software Proficiency: Synchro Pro, Navisworks, Revit, Civil 3D, CostX, Primavera P6, MS Project, Adobe Suite (After Effects, Premiere), Bentley Systems. • Technical Skills: 4D scheduling, 5D cost estimation, BIM modeling, clash detection, digital twin development, IoT integration. • Soft Skills: Strong communication, problem-solving, and project management abilities. 🎓 Qualifications & Experience • Education: Bachelor’s degree in Civil / MEP Engineering, Construction Management, or related fields. • Experience: Typically, 2–4 years in BIM implementation with a focus on 4D/5D simulations and digital twins. • Certifications: BIM certifications are advantageous.

Role Summary This role is to work as part of WSP’s Integrated Complementary Resource Centre (iCRC) as part of an engineering team and taking a senior role in the production of detailed structural drawings in Revit and AutoCAD focused on production and liaison with the WSP in India ME team and mentoring and coaching junior members of the team. Responsibilities Core Functions Perform BIM modeling and coordination for MEP (Mechanical, Electrical, Plumbing) design projects. Support project teams with CAD drafting tasks during various design stages. Assist in producing BIM-integrated design documentation for internal reviews, tender submissions, and client deliverables. Contribute to the continuous improvement and standardization of the department’s BIM workflows. Support departmental BIM-related research, training, and adoption of new software tools. Technical and Project Management Participate in BIM coordination meetings and ensure modeling outputs align with project timelines and technical requirements. Support the implementation of additional BIM software tools as needed by the department’s strategic direction. Provide input on quality assurance of BIM deliverables and contribute to the department’s digital capability enhancement. Occasional domestic business travel may be required, depending on project needs. Key Competencies / Skills Proficiency in Revit MEP and AutoCAD for electrical and mechanical modeling; familiarity with Navisworks is a plus. Understanding of MEP system design, construction sequencing, and spatial coordination. Fluent in English with strong comprehension of technical engineering terminology. Strong organizational and communication skills to support cross-disciplinary collaboration. Ability to manage multiple tasks and deliverables under time constraints. Familiar with Microsoft Office tools (Outlook, Word, Excel, Project). Curious, self-driven, and proactive in learning new BIM tools and best practices. Team-oriented with cultural awareness and an open, responsible attitude. The successful candidate will be a dynamic, self-motivated individual focused on delivery to the client and technical excellence. Cultural awareness, conscientious and an open mind and excellent communication skills are essential requirements for the role. Applicants need to be able to demonstrate good management, communication and technical skills and be capable of working both within the team and independently, as dictated by workload Qualifications Bachelor’s degree or higher in Electrical Engineering, Mechanical Engineering, or a related field. Minimum 3 years of experience in MEP design or construction, preferably with BIM project involvement. Experience with Revit MEP is required; openness to learning additional BIM tools is a plus. Experience with actual engineering site conditions or construction phases is a strong plus.

🔍 Internship Opportunity: Revit Training Intern (Hire After Training!) 📍 Location: Jaipur 🏢 Company: BIMQP 🕐 Duration: 2-3 Months (Performance-based full-time offer after training) 🚀 Jumpstart Your Career in BIM with BIMQP! Are you a civil engineer, architect, or design enthusiast looking to break into the world of Building Information Modeling (BIM)? Join our Revit Training Internship Program at BIMQP , where you don’t just learn — you earn your way to a job . We’re not here to waste your time. ✅ Get trained by professionals ✅ Work on real-life BIM projects ✅ Get hired if you prove your skills during training What You’ll Learn: 📐 Revit from scratch – modeling, families, sheets, and everything in between 🏗️ Industry workflows using BIM standards 📊 Collaboration tools like Navisworks, BIM 360, etc. 🧠 Project-based learning with live mentor feedback Who Should Apply? 🎓 Freshers / Final-year students in Civil, Architecture, or related fields 👷 Self-taught learners trying to go pro 🧑‍💻 Anyone with a passion for 3D design and construction tech Basic understanding of design tools is a plus Why This Internship is Different: 🚀 Placement Guarantee for Top Performers 💼 Get a letter of intent for hiring after training 💡 Work on actual client projects — not just academic tasks 🧑‍🏫 Daily mentorship + career growth guidance 🔥 Certificate + LinkedIn endorsement from our team How to Apply: Click Apply Now or DM us directly. ✨ Limited Seats. First come, first selected. 👉 Follow BIMQP to stay updated with our projects, client work, and team stories. 🔗 bimqp.com | 📩 v.harsh@bimqp.com #RevitInternship #BIMJobs #CivilEngineering #ArchitectureCareers #InternToHire #BIMTraining #Revit #BIMQP #HiringNow

Responsibilities Create detail, subassembly, and final assembly drawings of various products from sketches, job sheets, or markups of similar designs as required Co-ordinate and deliver as built drawings for customers Create drawings for permit Perform required drafting changes or create new drawings as required Update engineering design packages and prepare files for distribution as required Maintain and update CAD files, Assist engineers/designers with drafting and development of engineering work packages Design and draft single lines; hazardous area classification; electrical layouts c/w cable tray runs, grounding, cable runs, lighting; wiring schematics; cable/conduit schedules; lighting panel schedules; junction box layouts; control panel layouts; I/O loop drawings; heat trace design; electrical installation details; etc. Managing and organizing drawings including drawing number request, receiving, storing, printing, issuing, etc. Liaising and coordinating closely with internal team members and clients, and working effectively in a multi-disciplinary team environment Plan and organize work All other duties as assigned Qualifications Diploma or Bachelor’s Degree in Electrical/Instrumentation & Control Engineering (or related discipline) CAD Certificate or Diploma from a recognized institution preferred Ten (10) plus years of AutoCAD drafter/operator, in electrical and control system Strong knowledge of AutoCAD, AutoCAD electrical and Autodesk Plant 3D Strong knowledge of 3D Modeling Experience in Autodesk Navisworks Your benefits at WSP will include: Competitive benefits and remuneration packages Deepen your expertise in a dynamic work environment Innovative and collaborative multidisciplinary projects On the job training, mentoring and coaching Global projects and travel opportunities About Us WSP is one of the world's leading professional services consulting firms. We are dedicated to our local communities and propelled by international brainpower. We are technical experts and strategic advisors including engineers, technicians, scientists, architects, planners, surveyors and environmental specialists, as well as other design, program and construction management professionals. We design lasting solutions in the Transportation & Infrastructure, Property & Buildings, Earth & Environment, Power & Energy, Resources and Industry sectors, as well as offering strategic advisory services. Our talented people around the globe engineer projects that will help societies grow for lifetimes to come. With approximately 4,000 talented people across 3 locations (Noida, Bengaluru & Mumbai offices) in India and more than 73,000 globally , in 550 offices across 40 countries , we engineer projects that will help societies grow for lifetimes to come. At “WSP” we draw on the diverse skills and capabilities of our employees globally to compete for the most exciting and complex projects across the world and bring the same level of expertise to our local communities. We are proud to be an international collective of innovative thinkers who work on the most complex problems. Unified under one strong brand, we use our local expertise, international reach and global scale to prepare our cities and environments for the future, connect communities and help societies thrive in built and natural ecosystems. True to our guiding principles, our business is built on four cornerstones: Our People, Our Clients, Our Operational Excellence and Our Expertise. www.wsp.com We are Passionate people doing purposeful and sustainable work that helps shape our communities and the future. A collaborative team that thrives on challenges and unconventional thinking. A network of experts channeling our curiosity into creating solutions for complex issues. Inspired by diversity, driven by inclusion, we work with passion and purpose. Working with Us At WSP, you can access our global scale, contribute to landmark projects and connect with the brightest minds in your field to do the best work of your life. You can embrace your curiosity in a culture that celebrates new ideas and diverse perspectives. You can experience a world of opportunity and the chance to shape a career as unique as you. Our Hybrid Working Module With us, you can operate in a flexible, agile, yet structured work environment and follow a Hybrid Work Model. Maximize collaboration. Maintain product quality and cultural integrity. Balance community, collaboration, opportunity, productivity, and efficiency. Health, Safety and Wellbeing Our people are our greatest asset, and we prioritize a safe work environment. Health, safety, and wellbeing are integral to our culture, with each of us accountable for fostering a safe workplace through our “Making Health and Safety Personal” initiative. Our Zero Harm Vision drives us to reduce risks through innovative solutions, earning recognition for our global health and safety practices with the prestigious RoSPA Health and Safety Awards for six consecutive years. Inclusivity and Diversity WSP India is dedicated to fostering a sustainable and inclusive work environment where our greatest strength - Our People -feel valued, respected, and supported. We ensure an unbiased approach in hiring, promotion, and performance evaluation, regardless of age, gender identity, race, religion, sexual orientation, marital status, physical ability, education, social status, or cultural background. Imagine a better future for you and a better future for us all. Join our close-knit community of over 73,300 talented global professionals dedicated to making a positive impact. Together, we can make a difference in communities both near and far. With us, you can. Apply today. NOTICE TO THIRD PARTY AGENCIES: WSP does not accept unsolicited resumes from recruiters, employment agencies, or other staffing services. Unsolicited resumes include any resume or hiring document sent to WSP in the absence of a signed Service Agreement where WSP has expressly requested recruitment/staffing services specific to the position at hand. Any unsolicited resumes, including those submitted to hiring managers or other business leaders, will become the property of WSP and WSP will have the right to hire that candidate without reservation – no fee or other compensation will be owed or paid to the recruiter, employment agency, or other staffing service.

Job Purpose: Skilled Structural Designer to produce accurate and detailed 2D and 3D structural drawings, including connection detailing for steel and structures. The ideal candidate will have a strong understanding of structural standards and construction practices and be proficient in structural engineering & Autodesk tools. Role & responsibilities Prepare detailed 3D models in latest versions of AutoCAD & Advance Steel tool. Prepare detailed 2D drawings in latest versions of AutoCAD & Advance Steel tool. 2D drawing extraction from Advance Steel 3D model. Create accurate structural connection details in accordance with engineering standards and project requirements along with company standards. Review and verify the accuracy of drawings before submission. Review shop drawings. Expert in fabrication and erection processes. Ensure all drafting work complies with relevant codes, standards, and specifications. Familiarity with clash detection and model coordination tools (e.g., Navisworks). Ownership of creating UCC standard BOM & material releases. Generate Bill of Material for estimation. Involvement in General arrangement drawings, verify feasibility of maintenance & erection/assembly requirements. Maintain drawing records and ensure version control and consistency across projects. Collaborate closely with structural engineers, project team, and fabrication teams. Participating in project meetings to discuss project requirements, design and drafting issues. Preferred candidate profile Minimum of 5 years work experience as a structural draftsman or in a similar role. Strong understanding of structural standards , construction practices & proficient in structural engineering & Autodesk tools. Good Communication In English (Written & Verbal ) Ready for Business travel in India & Overseas Good Team Player, Adaptive to Change , Self-Starter , Team-Player. Perks and Benefits : As per UCC HR Policy.

About Us: emew India Private Limited is a part of the global emew Corporation, a leading innovator in clean technology solutions for sustainable metal recovery. emew India plays a vital role in delivering cutting-edge technologies for the efficient and environmentally responsible recovery of valuable metals. Job Summary: We are seeking a highly skilled and experienced AutoCAD Plant 3D Designer to join our plant engineering team. The ideal candidate will be responsible for developing detailed 3D models and designs of industrial plants, including piping, equipment, and structural elements, using Autodesk Plant 3D software. This role requires a strong understanding of plant design principles, industry codes, and the ability to collaborate effectively with cross-functional engineering teams. Key Responsibilities: Create and modify detailed 3D models of industrial plant components, including piping, equipment (pumps, vessels, heat exchangers, etc.), steel structures, and civil elements using AutoCAD Plant 3D. Develop comprehensive 2D drawings from 3D models, including Piping & Instrumentation Diagrams (P&IDs), General Arrangement (GA) drawings, isometric drawings, equipment layouts, and pipe support drawings. Generate Bill of Materials (BOM) and Material Take-Off (MTO) reports directly from the 3D model. Interpret and apply engineering specifications, P&IDs, vendor drawings, and other technical documents to ensure accurate and compliant designs. Participate in 3D model review sessions (e.g., using Navisworks) and incorporate feedback from various disciplines (process, mechanical, civil, electrical, instrumentation) to resolve clashes and optimize designs. Ensure all designs comply with relevant industry standards, codes, and regulations (e.g., ASME, ANSI, local Indian standards). Collaborate closely with process engineers, mechanical engineers, civil engineers, and other project stakeholders throughout the project lifecycle to ensure seamless integration of design elements. Prepare and update project documentation, including drawing registers, design change notices, and technical reports. Troubleshoot and resolve design-related issues, providing technical support and guidance as needed. Maintain up-to-date knowledge of AutoCAD Plant 3D software advancements, industry best practices, and new technologies in plant design. Assist in setting up new projects within Plant 3D, managing libraries, and catalogues. Perform site visits for as-built measurements and field verification as required. Qualifications: Diploma or Bachelor's degree in Mechanical Engineering, Proven experience (typically 3-7+ years) as an AutoCAD Plant 3D Designer in the industrial plant engineering sector (e.g., Oil & Gas, Petrochemical, Chemical, Power, Water Treatment). Expert proficiency in Autodesk AutoCAD Plant 3D, including 3D modelling, P&ID creation, isometric generation, and report extraction. Strong understanding of piping design principles, including pipe routing, support design, nozzle orientation, and material specifications. Familiarity with various piping components, valves, and their respective standards. Experience with 3D model review software such as Autodesk Navisworks, Inventor. Ability to read, interpret, and develop P&IDs, Process Flow Diagrams (PFDs), and other engineering schematics. Excellent attention to detail and a commitment to producing accurate and high-quality designs. Strong problem-solving and analytical skills. Effective communication and interpersonal skills, with the ability to collaborate effectively in a team environment. Ability to work independently and manage multiple tasks simultaneously to meet project deadlines. Proficiency in Microsoft Office Suite (Word, Excel, Outlook). Knowledge of other CAD software (e.g., AutoCAD 2D, MicroStation, PDMS, CAD Worx, SP3D) is a plus. Preferred Skills (Nice to Have): Experience with Plant 3D Spec Editor. Understanding of civil, piping, electrical and structural design principles for plant layouts. Familiarity with local International construction codes and regulations. Experience with BIM (Building Information Modelling) concepts. Benefits: List company benefits such as health insurance, paid time off, professional development opportunities, etc. To Apply: Interested candidates are invited to submit their resume and cover letter to prasad.rokade@emew.com, Please include "AutoCAD Plant 3D Designer - [Your Name]" in the subject line. Early joining will be appreciate.

BIM Modeler - MEP Gurgaon (Hybrid) Permanent Position Are you enthusiastic about joining an organisation that supports green transitionAre you an engineer with expertise in MEP BIMThen this position is for you! Join our BIM Tunnels and Underground Structures team in Gurgaon We are part of the Tunnels and Underground Structures department, consisting of more than 600 enthusiastic colleagues working from India, Denmark, UK and North America. We have a proven history of making underground tunnels, metros, immersed tunnels, shafts and pumping stations. We are part of COWIs International business line, we embrace cultural diversity and highly value our social and friendly environment. COWIs Underground structures team is rapidly growing and that is why we are looking for a BIM Modeller - MEP . Your key responsibilities will be: Develop and maintain detailed MEP models (Electrical & ELV, HVAC, PH & FF) using Revit and Navisworks Collaborate with design engineers and BIM coordinators for clash-free, constructible models Produce high-quality 2D drawings and 3D models for all MEP systems Create and modify Revit families based on project requirements Perform clash detection and resolve coordination issues using Navisworks Ensure models comply with BIM Execution Plans (BEP) and client standards Support interdisciplinary coordination and model updates during project stages Maintain model accuracy throughout design changes and revisions Participate in model reviews and coordination meetings as required YOUR SKILLS. OUR TEAM. TOGETHER, WE DESIGN THE FUTURE The first step to success in this role is that you are eager to collaborate with the people around you, whether they are colleagues, partners, or customers. Developing ties with others is something you do by acting respectfully and delivering on your promises. And you never get set in your ways but keep exploring new insights and ways to improve. Moreover, you will have: Diploma or Engineering degree in Electrical or Mechanical with 1 3 years of experience in BIM Modelling Advanced working knowledge of Revit, AutoCAD MEP, and Navisworks Basic understanding of MEP systems including HVAC, electrical, plumbing, and fire protection Experience with Dynamo, MicroStation, and Open Building Designer is an added advantage Familiarity with BIM standards such as ISO 19650 is desirable Strong attention to detail and problem-solving skills Ability to work collaboratively in a fast-paced, multidisciplinary team environment Good communication skills with a proactive and responsible attitude A place to work and so much more At COWI, we work together with our customers to shape a sustainable and liveable world. We do it by applying our knowledge and curiosity and sometimes even our courage to create the solutions the world needs today to enable a better tomorrow. That is why we say no to fossil-based projects and aspire to have 100 per cent of our revenue come from activities that move our customers towards sustainability. We value differences and development and cultivate an environment of belonging and having fun. Because that is what brings out the best in you, at work and at home. With offices primarily located in Scandinavia, the UK, North America, and India, we are currently 7,300 people who bring their expertise in engineering, architecture, energy and environment into play. Get to know us even better at our website, www.cowi.com , where you can learn more about our projects, our strategy, what we want to achieve and what life is like at COWI. Equal opportunity employer COWI provides equal employment opportunities (EEO) to all employees and applicants for employment without regard to ethnicity, colour, religion, gender, national origin, age or disability. This policy applies to all terms and conditions of employment, including recruiting, hiring, placement, promotion, termination, layoff, recall, transfer, leaves of absence, compensation, and training. #LI-Hybrid

AECOMs Enterprise Capabilities team is looking for a Associate Director- Architecture to join our team in Bangalore /Gurgaon office . About Enterprise Capabilities Fundamental to our Think and Act Globally strategy and digital adoption, Enterprise Capabilities (EC) is AECOMs primary vehicle for workshare. Operating across geographic boundaries and time-zones, EC partners with regional and Global Business Line project teams to provide technical expertise, accelerate delivery and keep AECOM competitive in the industry. With a team of over 3000 technical professionals located across nine countries and remote technical anchors, EC teams are trusted to deliver high-quality, specialist services that help to fill capability gaps, resourcing needs and technical constraints on projects of all scopes and sizes. Start here. Grow here. Performing basic architectural calculations. Preparing specifications, reports and related data tables. Maintaining liaison with design and drafting groups. Preparing, reviewing, and approving drawings as required. Under the direction of the Supervising Architect, may independently perform advanced technical assignments of various complexities within approved schedules and budgets. May coordinate technical and administrative activities with employees in other disciplines and other departments participating on an assigned project. May assist in the training and evaluation of assigned architectural and design/drafting personnel. May assist in the development of new architectural methods and techniques. Performing basic architectural/engineering calculations. Qualifications A Bachelor of Architecture is required Applicants are required to have between 13-18 years of experience in Architecture, Middle East/US/UK experience would be desirable but are not essential. Good communication skills, and ability to work well independently at times. Able to see the "bigger picture" and take a birds-eye view of projects Should have good skills in software like Autodesk Revit, AutoCAD, MicroStation and other related design software Should have basic transport architecture experience and should have worked in Workplace interiors. Should be keen to learn and develop new methods and software. Proven ability in delivering projects under tight timelines. Additional Information At AECOM, our Freedom to Grow philosophy supports flexibility and balance to help our people thrive. As part of this approach, we ask all hybrid employees to work from an AECOM office at least three days per week.

AECOMs Enterprise Capabilities team is looking for a Senior Principal Architect- Healthcare & general buildings to join our team in Bangalore /Gurgaon office . About Enterprise Capabilities Fundamental to our Think and Act Globally strategy and digital adoption, Enterprise Capabilities (EC) is AECOMs primary vehicle for workshare. Operating across geographic boundaries and time-zones, EC partners with regional and Global Business Line project teams to provide technical expertise, accelerate delivery and keep AECOM competitive in the industry. With a team of over 3000 technical professionals located across nine countries and remote technical anchors, EC teams are trusted to deliver high-quality, specialist services that help to fill capability gaps, resourcing needs and technical constraints on projects of all scopes and sizes. Start here. Grow here. Performing basic architectural calculations. Preparing specifications, reports and related data tables. Maintaining liaison with design and drafting groups. Preparing, reviewing, and approving drawings as required. Under the direction of the Supervising Architect, may independently perform advanced technical assignments of various complexities within approved schedules and budgets. May coordinate technical and administrative activities with employees in other disciplines and other departments participating on an assigned project. May assist in the training and evaluation of assigned architectural and design/drafting personnel. May review and approve conceptual designs. May assist in the development of new architectural methods and techniques. Performing basic architectural/engineering calculations. Qualifications A Bachelor of Architecture is required. Applicants are required to have between 8-12 years of experience in Architecture/Healthcare projects in Middle East/US/UK experience would be desirable but are not essential. Good communication skills, and ability to work well independently at times. Able to see the "bigger picture" and take a birds-eye view of projects Should have good skills in software like Autodesk Revit, AutoCAD, MicroStation and other related design software. Additional Information At AECOM, our Freedom to Grow philosophy supports flexibility and balance to help our people thrive. As part of this approach, we ask all hybrid employees to work from an AECOM office at least three days per week.

AECOMs Enterprise Capabilities team is looking for an Principal Designer to join our team in Gurugram . About Enterprise Capabilities Fundamental to our Think and Act Globally strategy and digital adoption, Enterprise Capabilities (EC) is AECOMs primary vehicle for workshare. Operating across geographic boundaries and time-zones, EC partners with regional and Global Business Line project teams to provide technical expertise, accelerate delivery and keep AECOM competitive in the industry. With a team of over 3000 technical professionals located across nine countries and remote technical anchors, EC teams are trusted to deliver high-quality, specialist services that help to fill capability gaps, resourcing needs and technical constraints on projects of all scopes and sizes. Start here. Grow here. Works under general direction. Responsible for providing leadership and direction of specific BIM technologies to assigned project teams. Develops technical solutions to wide range of difficult problems. Independently determines and develops approach to solutions. Perform complex assignments involving the use of multiple application platforms and complex systems including Revit software to achieve set results and deadlines. Qualifications 12 years or above BIM project experience working with software's like Revit, Navisworks etc. Additional Information At AECOM, you will have freedom to grow in a world of opportunity Our Freedom to Grow hybrid working philosophy is the cornerstone of our success as a business- supporting a culture of flexibility, trust and performance at AECOM.

AECOMs Enterprise Capabilities team is looking for an Senor Designer - Building Structure to join our team in Bengaluru . About Enterprise Capabilities Fundamental to our Think and Act Globally strategy and digital adoption, Enterprise Capabilities (EC) is AECOMs primary vehicle for workshare. Operating across geographic boundaries and time-zones, EC partners with regional and Global Business Line project teams to provide technical expertise, accelerate delivery and keep AECOM competitive in the industry. With a team of over 3000 technical professionals located across nine countries and remote technical anchors, EC teams are trusted to deliver high-quality, specialist services that help to fill capability gaps, resourcing needs and technical constraints on projects of all scopes and sizes. Start here. Grow here. Able to develop project specific implementation strategies and collaborate with project teams to ensure BIM success by Standardize and document Revit workflows & best practices. Able to handle or lead multiple projects with help of Project Designers. Assist BIM- Associate in preparing BIM Guidelines for project specific requirements. Assist BIM Manager in training of project personnel in the use of BIM tools. Create and Maintain BIM Models for Project Specific Requirements. Able to identify conflicts, incomplete or ambiguous design information and discuss with engineering team and coordinate with other discipline teams. Attend or manage model coordination meetings and document project preconstruction / BIM meetings. Create new library components and maintain once project is over. Provide ongoing support for all BIM applications and work closely with Design. Generating BIM documents to submit for construction/bidding purposes and Participate in Structure Coordination phases of projects when Revit models are required for clash detection. Maintain BIM standards and design templates to ensure quality and consistency of design environment and deliverables throughout various offices worldwide. Review and QA/QC project deliverables. Qualifications Minimum 6-8 years project experience using Revit Structure environment to deliver the Project. Must be able to demonstrate an intermediate to advanced level of knowledge and understanding of construction methods, processes, and systems. Must have knowledge and understanding of common construction terminology and nomenclature as well as various building types and systems. Experience in Infrastructure Projects likeMetros/Airports add more advantages. Must be able to demonstrate an intermediate to advanced working knowledge and experience with the following software applications as well as typically used terminology, standards, and practices Revit, Navisworks, AutoCAD, BIM 360, RC CAD, etc. Additional Information At AECOM, you will have freedom to grow in a world of opportunity Our Freedom to Grow hybrid working philosophy is the cornerstone of our success as a business- supporting a culture of flexibility, trust and performance at AECOM.

Work with Us. Change the World. At AECOM, we're delivering a better world. Whether improving your commute, keeping the lights on, providing access to clean water, or transforming skylines, our work helps people and communities thrive. We are the world's trusted infrastructure consulting firm, partnering with clients to solve the worlds most complex challenges and build legacies for future generations. There has never been a better time to be at AECOM. With accelerating infrastructure investment worldwide, our services are in great demand. We invite you to bring your bold ideas and big dreams and become part of a global team of over 50,000 planners, designers, engineers, scientists, digital innovators, program and construction managers and other professionals delivering projects that create a positive and tangible impact around the world. We're one global team driven by our common purpose to deliver a better world. Join us. AECOM EC is seeking for a candidate to be based in Gurgaon. Candidate will be responsible for the following activities 2 +years of experience in Operational Modelling Software- PTV VISSIM/ VISUM Good knowledge of the micro-simulations concepts and theories and how they relate to VISSIM. Operational Analysis - Using SYNCHRO/ SIDRA/ HCS Data analysis (including spreadsheets and databases) and problem-solving. Produce base network and ability to calibrate and validate. Knowledge of Signal coding using VAP. Produce forecast networks and matrices. Interpretation of model results and ability to prepare technical reports. Familiarity with UK/US/ANZ/Middle East transport modelling guidance. Mapping tools (GIS) and able to interpret quantitative transport models. Experience in programming (Excel macro, Python, R) would be a particular advantage. Ability to deliver quality output within agreed time and budget. Strong communication, presentation and report-writing skills. Ability to work in a challenging environment. Qualifications Masters degree in the relevant subject (e.g., Transport Planning/Engineering, or related subjects) Engineers with 2 to 5 years experience in Transport Planning Proficiency with some, or all of the following would also be considered beneficial: LinSig /Synchro/Sidra/Junction 10 PTV VISWALK/Legion Working knowledge of AutoCAD VISSIM COM and MOVA would be a particular advantage Additional Information AECOM provides a wide array of compensation and benefits programs to meet the diverse needs of our employees and their families. We also provide a robust global well-being program. Were the worlds trusted global infrastructure firm, and were in this together- your growth and success are ours too. As an Equal Opportunity Employer, we believe in each persons potential, and well help you reach yours. #LI-FS1

AECOMs Enterprise Capabilities team is looking for an Senior Designer - Bridges to join our team in Bengaluru . About Enterprise Capabilities Fundamental to our Think and Act Globally strategy and digital adoption, Enterprise Capabilities (EC) is AECOMs primary vehicle for workshare. Operating across geographic boundaries and time-zones, EC partners with regional and Global Business Line project teams to provide technical expertise, accelerate delivery and keep AECOM competitive in the industry. With a team of over 3000 technical professionals located across nine countries and remote technical anchors, EC teams are trusted to deliver high-quality, specialist services that help to fill capability gaps, resourcing needs and technical constraints on projects of all scopes and sizes. Start here. Grow here. Responsible for BIM & CAD DESIGN tasks as directed by the Engineer. Undertaking structural modelling and detailing on global projects using REVIT & AutoCAD. Develop Bridge models in Revit (from scratch). Prepare Bridge drawings in AutoCAD. Review and monitor the production of drawings to maintain quality and accuracy. Creation and editing of drawings & sketches in compliance with AECOM Standards. Develop RC intent drawings. Prepare and modify 3D BIM models for development of federated models. Maintaining regular communication with client/lead region/project lead for understand the clients requirements for qualitative and timely delivery. Liaising with the team manager/(s) to keep informed of all developments associated with the project. Providing guidance to the project team, leading a qualitative and client-focused culture. Qualifications Recognized Diploma or Degree in Civil Engineering. 6 to10 years relevant experience in Structural Engineering modelling and detailing. Proven experience & sound knowledge in bridges. Proven experience in 3D modelling using tools like Revit Structures & AutoCAD. Ability to create custom families and templates to enhance BIM workflows. Must be experienced in ProjectWise, BIM 360/ACC. Strong understanding on structural engineering is mandatory. Must be proactive and should maintain professionalism. Understanding of construction phasing and sequencing for complex projects. Proficient in written and verbal communication in English language and good command of technical English terminology. Experienced in working towards tight deadlines focusing on the quality of product. Must be self-motivated and able to work independently with minimum supervision. Strong understanding of industry standards and best practices, including ISO 19650 or COBie. Additional Information At AECOM, you will have freedom to grow in a world of opportunity Our Freedom to Grow hybrid working philosophy is the cornerstone of our success as a business- supporting a culture of flexibility, trust and performance at AECOM.

Work with Us. Change the World. At AECOM, we're delivering a better world. Whether improving your commute, keeping the lights on, providing access to clean water, or transforming skylines, our work helps people and communities thrive. We are the world's trusted infrastructure consulting firm, partnering with clients to solve the worlds most complex challenges and build legacies for future generations. There has never been a better time to be at AECOM. With accelerating infrastructure investment worldwide, our services are in great demand. We invite you to bring your bold ideas and big dreams and become part of a global team of over 50,000 planners, designers, engineers, scientists, digital innovators, program and construction managers and other professionals delivering projects that create a positive and tangible impact around the world. We're one global team driven by our common purpose to deliver a better world. Join us. AECOM EC is seeking for a candidate to be based in Bangalore or Gurgaon with the following skill sets : Good knowledge in Roads and understand the roads design terminology. Good in creating the Layouts, setting outs, cross-sections, Signs and Marking, understand Traffic signals, Pavement and Road furniture. Ability to extract the profiles, sections, setting out, grading etc., directly from the data shortcuts. Working knowledge in managing Civil3D data shortcuts in ProjectWise and BIM360 environments Ability to create templates and comply with project/client styles, line work, and naming conventions in both CAD and Civil3D. Understanding and implement AECOM Quality Assurance procedures Perform quality control, progress, scheduling and execution of product delivery to internal/external clients. Works under general guidance of the CAD Supervisor. Understanding of CAD Standard and workflow. Self learner, motivated and team player Adhering to AECOM safety, ethical and standard procedures Qualifications Diploma in Civil Engineering or Bachelor's in Civil Engineering followed by 5-9 years of experience of CAD works in Roads, Highways, Major Infra projects using Auto CAD/MicroStation tool. Good Experience of using Auto CAD/MicroStation, added advantage having civil 3d tool for Road, infra projects and experience of 3D modelling tasks of Road features, assets. Preferably worked on Global design experience and worked for international projects in collaborative environment Highway related BIM exposure, Excellent spoken and written Communications skills, ability to explain and co-ordinate with teams for projects success Basic understanding of CDE tools ProjectWise, BIM 360, Bluebeam and other appropriate tools. Quality process, procedures, implementation for delivery of projects Additional Information AECOM provides a wide array of compensation and benefits programs to meet the diverse needs of our employees and their families. We also provide a robust global well-being program. Were the worlds trusted global infrastructure firm, and were in this together- your growth and success are ours too. #LI-FS1

Job Description Work as part of WSP’s UK iCRC Water team in Bengaluru. Production of high-quality 3D BIM Models in Civil 3D, Revit/PLant 3D. Perform variety of 3D CAD modeling assignments under minimal supervision. Coordinate with Sr. Design Engineer/ BIM Coordinator/ Design Engineer for the information required to prepare BIM models and generate drawings as per specifications defined by our Client. Must have good 3D visualization capabilities. Must possess a good ability to work independently/ moderate supervision from BIM Coordinator. Collaborate with other designers, engineers, architects and clients to convert information into layout designs, drawings and models using AutoCAD, Civil3D, REVIT/ Plant 3D. Decipher information received from various formats (hand sketches, BIM Execution Plans and Architectural drawings). Experience within infrastructure especially WTP-WWTP projects is a plus. Should be interested and able to work in an international environment. Complete other duties as assigned appropriate for the designated grade level. Responsibilities Good command of written and verbal English. Candidate should have a clear and demonstrable technical understanding of standards and norms pertaining to UK Water Industry. Problem solving and originality. Computer literate, e.g. Word, Excel, PowerPoint and Outlook. Successful candidate will be a dynamic, self-motivated individual focused on delivery to the client and technical excellence. The role requires assisting BIM Coordinator and Sr. Design Engineer in managing several projects and becoming involved in design at an early stage. The ability to plan your deliverables against UK engineering standards for each stage of a project is a pre-requisite and training and guidance will be provided where necessary. Cultural awareness, conscientious and an open mind and excellent communication skills are essential requirements for the role. Ability to work under pressure and with moderate amount of supervision. Accountable and see the big picture of the project to achieve the best result for the client Careful and responsible. Understand the concept of working in a team. Willingness to travel to the UK for short term assignments and training. Strong attention to details and ability to make correct judgements. Qualifications Degree/Diploma in Engineering. Experience with Civil/ Architectural/ Structural/ Mechanical drawings, developing equipment layout and site plan drawings. Experience in leading the modeling related tasks and coordinating with client to get the deliverables completed on schedule and budget. Must possess a good working knowledge of core 3D CADD applications (such as Revit, Civil 3D, Plant 3D), as outlined above. Must have acceptable knowledge in handling Revit and other BIM application tools and concepts of BIM. Capable of producing Revit plans, sections, elevations, details, schedules etc. must be familiar with all Revit tools and creating and editing view range, drafting views, view templates, system families, materials, project/shared parameters, multi-category schedules, project title blocks, worksets, Revit category-based profile, annotation families etc., must be capable of linking multiple Revit files and work. Capable of handling Revit projects with guidance from superior and managing/ sharing work with others. Must be capable of performing Clash detection using Navisworks and Revit interference check, export Clash reports, review clash reports etc. Create Dynamic Blocks with parameters Use different 3D representations such as shading, conceptual etc. Export 3D geometry for use by subcontractors and outside agencies. Assist in the production of 2D sheets (plans, sections, 3D clips and details) from 3D/4D multi-discipline models (Transitional 2D techniques)

Job Description Highway Engineering, Civil 3D, Novapoint Responsibilities Design and Development: Collaborate with senior engineers and lead country stakeholders to create highway design plans, ensuring compliance with industry standards, regulations, and safety requirements. Utilize software programs (e.g., Civil 3D. AutoCAD, Novapoint etc.) to design and draft highway layout plans, vertical and horizontal alignments, intersection designs, and other project details include roadway modelling. Conduct thorough research to identify the most effective and sustainable method, processes, and design routine for highway tender, construction, and maintenance. Ensure projects are delivered on time, within budget, and in compliance with relevant regulations and quality standards. Project Management: Assist for preparing cost and time estimates for highway projects, considering factors such as modelling complications, skills set, time, and environmental impact. Monitor project progress and ensure adherence to deadlines and budget constraints. Anticipate and resolve any issues or risks and provide regular updates to senior engineer/ lead country leads. Coordinate with contractors, suppliers, and external agencies to procure resources and permits required for construction activities. Conduct site visits and inspections to assess the quality of work and resolve any technical issues that may arise during the construction phase. Stakeholder Engagement: Foster effective communication, coordination, and collaboration within the highways team and cross-functional departments and lead country project managers in perspective of smooth project execution. Conduct regular design execution oversee that for construction doability, resolve issues, and ensure compliance with design specifications and safety standards. Provide guidance and support during the design development phases, including the evaluation of design basis provided, identify design departures and mitigation opportunities, and present solutions for end-clients. Quality Assurance and Safety: Follow the quality control procedures and best practices throughout the design phase to ensure high-quality project delivery. Conduct regular inspections and audits to verify compliance with design, safety, and environmental standards. Collaborate with the design team to ensure the Quality Assurance documentation and records are maintained. Ensure all design activities, incoming and outgoings are undergone appropriate self check and review steps followed before delivery. Qualifications Bachelor’s degree in civil engineering. A master’s degree is an advantage. A minimum of 3 - 6 years of proven experience in highway engineering, preferably with a focus on planning, design, and construction of highways & roadway projects. International projects exposure, codes and practices are preferred. You will be competent using leading design software i.e. Civil 3D, AutoCAD. Knowledge on C3D-Naviate, Novapoint, Navisworks are preferred. You should be able to understand and collaborate with other disciplines and multi-D schemes for their design incorporation in perspective of BIM modeling and clash review. You should have clear understanding of Highways Design deliverables and its execution. Preferred to have Nordics countries Highways design practice and exposure to the Euro code /TrV Swedish standards and roadway design manuals. You should be able to demonstrate some experience and working knowledge of relevant technical design guidance and international standards, such as DMRB, MfS, TSRGD, HCD, and IAN 184 etc. In-depth knowledge of highway design principles, codes, standards, and regulations. Strong analytical and problem-solving skills, with the ability to propose innovative and efficient solutions. Excellent design and time management skills that ability to meet strict deadlines. Excellent communication, interpersonal skills and possess teamwork attitude. Study and educate juniors on the requirements of Swedish Highways design Manuals and practices Identify the Highways team advancement opportunities to enhance WSP Sweden/Nordics services. Strong problem-solving skills and the ability to think critically in a fast-paced environment. You will take responsibility for own personal development with the support of line manager and follow an agreed development plan. Other Skills Good interpersonal skills with colleagues and clients. Fluent spoken English with excellent verbal, written and graphic communication skills. Self-motivated and adaptable, maintaining a confident demeanour when change occurs. Ability to work under pressure and with minimum of supervision.

Job Description Bim, autocad, highway design, Coordination, Team Handling, Civil 3D Responsibilities Ability to utilise AutoCAD/Civil 3D in adherence to defined standards to lead and develop engineering design Ability to liaise with the Design team/CAD as necessary to coordinate design and drawing production. Capable of multi-tasking and managing multiple projects with the ability to accurately predict the time required to fulfil the individual scopes of work required. Assists with establishing, maintaining and enforcing the use of proper standards and procedures. Undertake reviews of work produced by others to ensure high quality design. ME Highways project experience and knowledge of Middle East design standards You should be able to demonstrate some experience and working knowledge of relevant technical design guidance and standards, such as UAE, KSA, Kuwait, Qatar, AASHTO Ability to understand and communicate standards for use on Civil engineering projects and possessing an appropriate overall level of knowledge Proficient in use of standard office software Proficiency in the use of Autodesk Products, BIM 360 and Navisworks/Infraworks. Experience of supervising and coordinating the CAD output of others (either directly or indirectly) within a multi-disciplinary project environment. A passion for quality and continuous improvement with a focus on delivery. Good written and verbal communication skills. Effective time management and strong organisational skills. Qualifications Expertise in Civil 3D and adherence to defined standards to lead and develop engineering design Capable of multi-tasking and managing multiple projects with the ability to accurately predict the time required to fulfil the individual scopes of work required.

We are seeking a highly motivated and experienced Sales or Account Manager to lead business development and key account management for our BIM-related services across the Middle East and Europe. The ideal candidate will have hands-on experience with BIM projects, a solid understanding of architectural, civil, and MEP disciplines, and deep knowledge of local engineering standards in these regions. Prior experience working in the Middle East market is essential. Key Responsibilities Lead Management: Proactively handle assigned leads and generate your own pipeline through networking, market research, and outreach activities to ensure continuous business growth. New Client Acquisition: Identify and secure new clients for BIM and allied services in architectural, civil, and MEP domains within the Middle East and Europe [Experience in Architecture, Structural Engineering, Land Development, and BIM workflows preferred]. Key Account Management: Build and maintain strong relationships with existing clients, ensuring high satisfaction, repeat business, and opportunities for upselling. Market Expertise: Develop a thorough understanding of the Middle East construction market dynamics, local engineering standards, regulations, and client requirements to tailor sales strategies effectively. Technical Sales : Leverage hands-on BIM project experience and multidisciplinary knowledge to articulate the value proposition of BIM services to technical and non-technical stakeholders. Proposal & Contract Management: Collaborate with technical teams to prepare customized proposals and lead contract negotiations ensuring mutually beneficial agreements. Cross-Functional Collaboration: Work closely with BIM managers, project delivery teams, and leadership to align client expectations with project execution capabilities. Sales Reporting & Forecasting: Maintain accurate records of sales activities, pipeline status, and forecast revenue to support business planning. Brand Representation: Represent the company at industry events, client meetings, and conferences to enhance visibility and build networks. Qualifications Education: Bachelor’s degree in architecture, Civil Engineering, Mechanical Engineering, or related disciplines. Experience: Minimum 5 to 7 years in sales or account management within BIM-related services or construction technology, with proven experience in the Middle East market. Technical Knowledge: Strong familiarity with BIM software (Revit, Navisworks, BIM 360), AutoCAD, Civil 3D and multidisciplinary BIM workflows covering architectural, civil, and MEP disciplines. Regional Expertise: Deep understanding of Middle East construction market, local engineering codes, standards, and client expectations. Prior direct experience in this region is critical. Sales Skills: Demonstrated ability to generate leads independently, manage assigned leads, close complex deals, and maintain key accounts. Communication: Excellent interpersonal, presentation, and negotiation skills with the ability to communicate technical concepts clearly to diverse audiences. Languages: Fluency in English is required; proficiency in Arabic or other regional languages is an advantage. Preferred Skills Experience working with international and multicultural teams. Knowledge of European construction markets and standards is a plus. Ability to coordinate between offshore and onshore teams effectively. Strong strategic thinking and problem-solving skills. Job Location: Trivandrum (Kerala) Education: Bachelor’s degree in architectureBE Mechanical EngineeringCivil Engineering Experience: 5 to 7yrs

We are looking for a skilled *BIM Engineer* to join our team. The ideal candidate will be responsible for creating and managing Building Information Models (BIM) using Revit and other design tools. You will support design coordination, clash detection, and ensure model accuracy throughout the project lifecycle. --- ### Responsibilities: •⁠ ⁠Develop and manage 3D BIM models for architecture, structure, and MEP. •⁠ ⁠Perform clash detection using Navisworks or similar tools. •⁠ ⁠Support design and construction teams with up-to-date coordinated models. •⁠ ⁠Maintain compliance with BIM standards and execution plans. •⁠ ⁠Collaborate with engineers, architects, and contractors. --- ### Requirements: •⁠ ⁠Bachelor's degree in Engineering, Architecture, or related field. •⁠ ⁠Proficiency in Revit, Navisworks, and AutoCAD. •⁠ ⁠4+ years of BIM experience in construction or design projects. •⁠ ⁠Strong coordination and communication skills. --- Job Types: Full-time, Permanent Pay: ₹480,000.00 - ₹960,000.00 per year Experience: BIM Industry: 3 years (Required) Work Location: In person

We’re AtkinsRéalis, a world class Engineering Services and Nuclear organization. We connect people, data and technology to transform the world's infrastructure and energy systems. Together, with our industry partners and clients, and our global team of consultants, designers, engineers and project managers, we can change the world. Created by the integration of long-standing organizations dating back to 1911, we are a world-leading professional services company dedicated to engineering a better future for our planet and its people. We deploy global capabilities locally to our clients and deliver unique end-to-end services across the whole life cycle of an asset including consulting, advisory & environmental services, intelligent networks & cybersecurity, design & engineering, procurement, project & construction management, operations & maintenance, decommissioning and capital. The breadth and depth of our capabilities are delivered to clients in key strategic sectors. News and information are available at www.atkinsrealis.com or follow us on LinkedIn. Our teams take great pride in delivering some of the world’s most prestigious projects. This success is driven by our talented people, whose diverse perspectives, expertise, and knowledge set us apart. Join us and you'll be part of our genuinely collaborative environment, where everyone is supported to make the most of their talents and expertise. When it comes to work-life balance, AtkinsRéalis is a great place to be. So, let's discuss how our flexible and remote working policies can support your priorities. We're passionate about are work while valuing each other equally. So, ask us about some of our recent pledges for Women's Equality and being a 'Disability Confident' and 'Inclusive Employer’. Technical: Good understanding of drawing information & approved documents. Ability to execute instructions and mark-ups under minimal supervision. Ability to incorporate information from drawings of other disciplines. Documentation & Process Knowledge: Knowledge of RIBA Stages of Work/ Design stages. Knowledge of inter disciplinary co-ordination. Project Administration: Good understanding of the planning submission requirements. Ability to assist seniors in production of the required documents and drawings. Ability to locate the source and the information and carry out additional research as instructed. Aware of the standards and ability to analyse and understand the document. Assist seniors for compliance. Understands the design requirement. Awareness of the associated consultants/ contactors and level of their involvement in the project. Aware of local planning authority procedures of work. Assist senior team member in preparing the feasibility studies, and possible documentation works. Ability to develop options for concept designs under the supervision of seniors. Assist team to work out hours estimate per drawing. Take minutes of set up meetings etc. Produces area/ accommodation schedules etc. Continues to develop knowledge in Project administration as project work continues. Project Tools: Revit: 3D coordinated model ensuring consistency across all drawings and views. Building the model as a build-up of components using components from a library, and the intelligence associated with these components. The parametric nature of the components in the model. Organizing views in sheets and using view templates. Publishing and coloring drawings. 2D Detailing. Using work sets. Creating automated schedules and Legends. Advanced level of with Autodesk certification preferred. Basic knowledge of Navisworks and basic awareness of Dynamo. Awareness of AutoCAD, Sketch up, Photoshop, InDesign, Enscape preferred. Architecture Construction & Technology: Can read and understand client mark-ups and address them neatly with minimal supervisor's support. Self-check and cross check if all mark-ups have been incorporated. Has good knowledge of range of materials and their varied usages in construction. Takes initiative to carry out research on the materials and is enthusiastic to learn and explore the materials under minimal supervision of seniors. Continues to develop knowledge of materials through progression of project work. General: Masters with 2 years of experience, or graduates (or equivalent) with 3-5 years’ work experience. Ability to read and understand drawings with respect to its orientations and information content etc. Ability to produce detailed information in the drawings under supervision. Ability to interrogate the drawing information and be able to produce clear & accurate drawings. Ability to annotate the drawing with proper notes and specification clauses provided. Develops knowledge about different packages & their use. Able to interrogate the information contained within. What We Can Offer You: Varied, interesting and meaningful work. A hybrid working environment with flexibility and great opportunities. Opportunities for training and, as the team grows, career progression or sideways moves. An opportunity to work within a large global multi-disciplinary consultancy on a mission to change the ways we approach business as usual. Why work for AtkinsRéalis? We at AtkinsRéalis are committed to developing its people both personally and professionally. Our colleagues have the advantage of access to a high ranging training portfolio and development activities designed to help make the best of individual’s abilities and talents. We also actively support staff in achieving corporate membership of relevant institutions. Meeting Your Needs: To help you get the most out of life in and outside of work, we offer employees ‘Total Reward’. Making sure you're supported is important to us. So, if you identify as having a disability, tell us ahead of your interview, and we’ll discuss any adjustments you might need. Additional Information: We are an equal opportunity, drug-free employer committed to promoting a diverse and inclusive community - a place where we can all be ourselves, thrive and develop. To help embed inclusion for all, from day one, we offer a range of family friendly, inclusive employment policies, flexible working arrangements and employee networks to support staff from different backgrounds. As an Equal Opportunities Employer, we value applications from all backgrounds, cultures and ability. We care about your privacy and are committed to protecting your privacy. Please consult our Privacy Notice on our Careers site to know more about how we collect, use and transfer your Personal Data. Link: Equality, diversity & inclusion | Atkins India (atkinsrealis.com)

Job Summary We are seeking a skilled and detail-oriented HVAC Design Engineer with 4–8 years of experience in designing HVAC systems for commercial, residential, and industrial projects in the UK and Middle East regions. The ideal candidate will have a strong understanding of regional codes and standards, and proficiency in industry-standard software tools. Key Responsibilities Design and develop HVAC systems including load calculations, ductwork and piping layouts, and equipment selection. Perform thermal load calculations using software such as HAP or IES VE. Prepare design markups for BIM team. Prepare equipment schedules and schematic drawings. Prepare detailed HVAC design drawings using AutoCAD and Revit MEP. Coordinate with multidisciplinary teams including architects, structural, and electrical engineers. Conduct clash detection and coordination using Navisworks. Ensure compliance with UK (CIBSE, BSRIA) and Middle East (ASHRAE, local authority) standards and regulations. Participate in design reviews and value engineering exercises. Required Skills And Qualifications Bachelor’s degree in Mechanical Engineering or related field. 4–8 years of relevant HVAC design experience. Strong knowledge of HVAC design principles, equipment, and systems. Proficiency in: HAP (Hourly Analysis Program), IES VE (Integrated Environmental Solutions), AutoCAD, Revit MEP, Navisworks, and other HVAC design tools and simulation software. Familiarity with UK and Middle East building codes and HVAC standards. Excellent communication and documentation skills. Ability to work independently and as part of a team. Preferred Qualifications Professional certifications (e.g., LEED, CIBSE membership, ASHRAE). Experience with sustainable and energy-efficient HVAC design. Exposure to BIM workflows and coordination. We Can Offer (subject To Company’s Policy) Agile and safe working environment Competitive annual leave and sick leaves Group incentive scheme Group term life insurance, Workmen’s compensation and Group medical insurance coverage Short and Long-term Global employment opportunities Global collaboration and knowledge sharing Digital Innovation and Transformation Equality, diversity and inclusion We put equality, diversity and inclusion at the heart of our business, seeking to promote fair employment procedures and practices to ensure equal opportunities for all. We encourage individual expression in our workplace and are committed to creating an inclusive environment where everyone feels they have the opportunity to contribute. Agile working At Mott MacDonald, we believe it makes business sense for you and your manager to choose how you can work most effectively to meet your client, team and personal commitments. We embrace agility, flexibility and trust. Location(s): Bengaluru, KA, IN Contract Type: Permanent Work Pattern: Full Time Market: Buildings Discipline: Building services Job Ref: 9412 Recruiter Contact: Mamta Divekar

Urgent Opening | GM – Civil Business Unit (Design Head) Location: Mumbai Industry: EPC | Civil Infrastructure Company: Globally renowned EPC organization Experience: 20+ years Apply Now: deepti.shinde@sseduks.com We are hiring a General Manager – Design Strategy (Civil BU) for a globally recognized EPC company based in Mumbai . This is a leadership role responsible for driving innovative, cost-effective, and compliant design solutions across large-scale projects, including: Buildings & Urban Infra – High-rises, Smart Cities, Townships Industrial Facilities – Factories, Warehouses, Plants Public Infrastructure – Airports, Metro Stations, Hospitals Water & Utilities – Pipelines, STPs, WTPs Key Responsibilities: Lead a 50+ member design team (Civil, Structural, MEP) Drive digital transformation (Revit, Navisworks, BIM 360) Standardize RCC/Steel/Precast designs Approve GFCs, BOQs, and resolve design conflicts Achieve 10–15% cost savings via value engineering Coordinate with PMCs, clients (L&T, Adani, etc.), and authorities Foster team learning (ETABS, SAFE, Tekla) & monitor KPIs Candidate Profile: Education: B.E./B.Tech in Civil (Mandatory) M.E./M.Tech in Structural (Preferred) PMP, LEED GA, BIM certifications (Plus) Experience: 20+ years in civil/structural design (EPC/Consulting/Infra Dev) Led ₹500+ Cr projects Proficient in STAAD.Pro, ETABS, AutoCAD, Revit, BIM 360 Interested? Send your resume and the details of your projects to: deepti.shinde@sseduks.com