1243 Microcontrollers Jobs - Page 2

About Nexstem Nexstem is building the Human Body API —a platform to read and write biosignals like EEG, ECG, and EMG. By combining cutting-edge hardware, software, and data infrastructure, we’re accelerating the future of brain-computer interfaces (BCI) and human-computer interaction (HCI). Our mission is to decode the body’s signals to tackle challenges like restoring lost functions, enhancing human capabilities, and enabling breakthroughs in health and cognition. Roles And Responsibilities Product Design and Development: Responsible for the design, development, and support of new and existing hardware products. Manage the design process from conceptual design, parts selection, design simulation, detailed design, and schematic capture, to PCB design rules creation. Coordinate with layout teams to ensure adherence to guidelines during PCB design and manufacturing. Lead prototype builds with contract manufacturers and manages product bring-up, debugging, and verification. Testing and SupportExecute test protocols, document results, and provide feedback for improvement of existing products. Support environmental testing and entry into production phases for hardware systems. Provide on-site support for customer-related activities, including demos, training, installation, and troubleshooting field issues. Cross-Department CollaborationCollaborate with software, mechanical, and other departments as part of daily board design practices to maintain inter-departmental communication. Work closely with the design and layout teams to support board layout, system bring-up, and verification. Involved in customer-facing activities such as demos, installation, and field issue resolution. Continuous Innovation an integral part of the Hardware Design Team, driving new ideas for product development and offering feedback to improve existing systems. Requreiments Technical Expertise Proven experience in designing ultra-low-noise analog front-ends and precision analog circuits. Deep knowledge of mixed-signal system design, including both analog and digital subsystems. Strong understanding of electronic hardware, circuit theory, and electronic components such as MOSFETs, transistors, ADCs, DACs, filters, and feedback systems. Experience in power electronics, including power supply architecture design and regulation. Expertise in analog and digital circuit design, including microcontrollers and communication protocols like UART, SPI, I2C, I2S, CAN bus, RS232, Ethernet etc. Proficiency in PCB design tools (e.g., Altium) and high-speed schematic capture. Skilled in circuit simulation and modeling tools, including LTspice, TINA, MATLAB/Simulink, and PSpice. Hands-on experience with lab equipment such as multimeters, oscilloscopes, spectrum analyzers, power supplies, and protocol analyzers. Solid grasp of sensor interfaces, signal conditioning, and analog-to-digital conversion (ADC) techniques. Ability to read and interpret schematics, wiring diagrams, datasheets, and technical documentation. Design and Testing Knowledge Experience with design-for-manufacturing (DFM) and design-for-testability (DFT) best practices. Skilled in signal quality verification (SNR, THD, CMRR) and data fidelity validation using precision instruments. Knowledge of EMC/EMI design practices, compliance testing, and certification standards such as IEC 60601-1 and medical-grade safety. Familiarity with product certification processes and working with EMC/Safety labs for regulatory readiness. Prior experience in environmental qualification, stress testing, and failure analysis (HALT/HASS is a plus). Ability to troubleshoot embedded systems, analyze test failures, and support documentation of layout/test procedures. Communication and Collaboration Strong written and verbal communication skills with the ability to clearly convey design ideas and technical concepts. Effective collaboration with cross-functional teams (software, mechanical, layout engineers). Ability to work independently on complex hardware design tasks with minimal supervision. Additional Skills Knowledge of C programming is a plus. Experience with analog/digital video interfaces is an advantage. Prior work on wearable or portable electronics, particularly in human-interface systems like BCI (Brain-Computer Interfaces), is highly desirable. Industry Biotechnology Research Skills: adcs,product certification processes,signal quality verification (snr, thd, cmrr),circuit theory,high-speed schematic capture,mixed-signal system design,stress testing,circuit design,mixed signal,pcb,emc/emi design practices,circuit simulation and modeling tools (ltspice, tina, matlab/simulink, pspice),signal conditioning,oscilloscopes,power supply architecture design,layout,i2c,design-for-testability (dft),technical documentation,spectrum analyzers,sensor interfaces,ultra-low-noise analog front-ends design,analog-to-digital,mathlab,design-for-manufacturing (dfm),design,universal asynchronous receiver/transmitter (uart),multimeters,ethernet,pcb design tools (altium),circuit simulators,interfaces,collaboration,analog and digital circuit design,mosfets,precision analog circuits design,protocol analyzers,analog/digital video interfaces,c programming,rs232,simulink,power electronics,communication protocols (uart, spi, i2c, i2s, can bus, rs232, ethernet),communication,testing,feedback systems,transistors,digital,data fidelity validation,dacs,filters,microcontrollers,troubleshooting embedded systems,failure analysis,circuit,analog-to-digital conversion techniques,power supplies,environmental qualification,ltspice,pcb design

Job Title: Hardware Design Engineer – Embedded Systems Location: Coimbatore, Tamil Nadu Job Type: Full-time (On-site) Salary: ₹2,50,000 – ₹5,00,000 per year Work Schedule: Monday to Friday Job Summary: We are looking for a skilled and dedicated Hardware Design Engineer with expertise in embedded systems and power electronics. This role involves the complete hardware design cycle — from circuit design and microcontroller integration to testing and compliance. Ideal candidates will have hands-on experience in SMPS, microcontrollers, digital/mixed-signal circuits, and EMI/EMC standards. Key Responsibilities: Design SMPS, DC/DC converters, and LDOs Develop embedded hardware using AVR, PIC, and ARM Cortex microcontrollers Implement communication protocols such as UART, I2C, and SPI Ensure hardware designs meet EMI/EMC compliance standards Create schematics and bills of materials (BOM) using ECAD tools Test and debug electronic circuits using lab equipment such as oscilloscopes and multimeters Work on capacitive touch sensor integration when applicable Required Technical Skills: SMPS, DC/DC converters, LDOs Embedded C programming AVR, PIC, and ARM Cortex MCU architectures UART, I2C, SPI protocol implementation EMI/EMC standards and compliance techniques ECAD software (Altium, Eagle, KiCad, etc.) Circuit debugging and testing tools Capacitive touch sensor design Arduino (minimum 3 years of hands-on experience) Educational Qualification: Bachelor’s degree in Electronics and Communication Engineering (ECE), Electrical and Electronics Engineering (EEE), or a related field Master’s degree is an added advantage Experience Required: Minimum 3 years of experience in: Embedded C development Hardware design and testing Arduino-based hardware development Who Should Apply: Engineers passionate about building innovative embedded hardware solutions Professionals seeking core hardware roles in Coimbatore Candidates ready to work on end-to-end embedded product design Immediate joiners are preferred. Job Types: Full-time, Permanent Pay: ₹250,000.00 - ₹500,000.00 per year Ability to commute/relocate: Coimbatore, Tamil Nadu: Reliably commute or planning to relocate before starting work (Required) Application Question(s): Do you have at least 3 years of hands-on experience in hardware design, including SMPS or DC/DC converter design? Which microcontroller platforms have you worked with professionally? (Select all that apply) AVR PIC ARM Cortex Arduino All How would you rate your proficiency in working with communication protocols like UART, I2C, and SPI? Expert – Can implement and troubleshoot independently Intermediate – Can implement with some guidance Beginner – Basic understanding only No experience

A Firmware Embedded Engineer is responsible for designing, developing, and maintaining firmware for embedded systems. This role typically involves close collaboration with hardware engineers to ensure seamless integration of software and hardware, emphasizing efficiency, reliability, and performance within real-time environments. Key Responsibilities Design, develop, and debug firmware for embedded systems, including microcontrollers and microprocessors. Collaborate with hardware engineers to define system specifications and ensure hardware-software compatibility. Develop and implement new features and functionalities in embedded products. Perform code reviews, unit testing, and debugging to ensure firmware quality and reliability. Optimize firmware for performance, resource usage, and power management. Maintain and update existing firmware, provide technical documentation, and write automated test scripts on developed features. Work with development teams to ensure compliance with project requirements and contribute to overall system integration and validation. Stay current with technological advancements in embedded systems and propose innovative solutions. Required Skills and Qualifications Bachelor’s degree in Electrical Engineering, Computer Engineering, Computer Science or a related field. 3+ years of experience in embedded systems firmware development. Proficiency with C/C++ programming for embedded systems. Strong understanding of microcontrollers, microprocessors, and embedded system architectures. Experience with real-time operating systems (RTOS) and embedded Linux is highly valued. Knowledge of hardware-software interfaces, including communication protocols (SPI, I2C, UART, CAN, etc.). Familiarity with debugging tools such as oscilloscopes, logic analyzers, and in-circuit debuggers. Experience with version control systems (e.g., Git), and source code documentation practices. Strong problem-solving skills, attention to detail, and ability to work collaboratively within larger teams. Solid communication abilities for technical documentation and team collaboration. Preferred Skills and Qualifications Hands-on experience with NXP Secure Element Chip SE050. Extensive background in cybersecurity, with strong understanding of cryptographic algorithms and protocols. Practical experience working with microcontrollers such as STM32 and MCXA143. Proficient in communication protocols including I2C and UART. Familiar with the ISO7816 standard. Advanced degree (Master’s or relevant certifications) in a related field. Experience with embedded security, safety-critical protocols, or IoT-specific firmware (MQTT, CoAP, HTTP). Familiarity with Agile development methodologies and software development lifecycle best practices. Job Type: Full-time Pay: ₹20,000.00 - ₹35,000.00 per year Ability to commute/relocate: Gota, Ahmedabad, Gujarat: Reliably commute or planning to relocate before starting work (Preferred) Experience: Firmware Embedded: 3 years (Required) Work Location: In person Speak with the employer +91 9265389374

Lead Project Enggineer– Bangalore, Karnataka, India Come make the world and accelerate your success. It takes great people to achieve greatness. People with a sense of purpose and integrity. People with a relentless pursuit of excellence. People who care about making things better For Those Who Make The World™. Sound like you? Join our top-notch team of more than 50,000 diverse and high-performing professionals globally who are making their mark on some of the world’s most beloved brands, including DEWALT®, BLACK+DECKER®, CRAFTSMAN®, STANLEY®, CUB CADET®, and HUSTLER®. The Job: As a Lead Project Engg, you’ll be part of our Engineering team. You’ll get to: Understand of embedded software concepts, including hard real time processing, process scheduling, cooperative multitasking, interrupt processing, race conditions, RTOS. Take a wider view of software architecture with respect to standardization and re-use. Work on software development processes and controls (static analysis, distributed version control, unit testing, bug tracking). Experience with debugging (either with in-circuit debugger or by other means) Able to discover and implement creative or innovative ideas and inspire others to do so. Able to accomplish unrelated objectives concurrently. Able to travel and interface with overseas electronic contract manufacturers and provide technical direction to obtain quality electronics assemblies for tool production. Work on common motor control techniques, including sensored and sensorless trapezoidal control. Understand of common microcontroller peripherals such as: timers, GPIO, watchdog, ADC, UART, DMA. The Person: You love to learn and grow and be acknowledged for your valuable contributions. You’re not intimidated by innovation. Wouldn’t it be great if you could do your job and do a world of good? In fact, you embrace it. You also have: BSEE, BSCS, BSCE or equivalent (4 years) from accredited computer/electrical engineering college Extensive knowledge of developing embedded 8bit/16bit/32bit microcontrollers in C, C++, or ASM. Experience with ARM architectures preferred. Experience with assembly language coding is a plus. Work experience of 7+ years with electronics, software development, and embedded firmware. Leading junior embedded engineers is a plus. Experience with closed loop control and feedback systems for AC and BLDC motors Familiarity with lithium ion battery powered systems. Display strong ownership of an objective and work diligently to resolve it. Strong communication and interpersonal skills to influence the organization and to communicate effectively with internal and external customers. Willingness to help others on the team in resolving their issues when necessary. Foster and maintain a high level of integrity in all aspects of work. And More: We want our company to be a place you’ll want to be – and stay. Being part of our team means you’ll get to: Grow: Be part of our global company with 20+ brands to grow and develop your skills along multiple career paths. Learn: Have access to a wealth of learning resources, including our Lean Academy, Coursera®, and online university. Belong: Experience an awesome place to work where we have mutual respect and a great appreciation for diversity, equity, and inclusion. Give Back: Help us continue to make positive changes locally and globally through volunteerism, giving back, and sustainable business practices. What’s more, you’ll get that pride that comes from empowering makers, doers, protectors, and everyday heroes all over the world. We’re more than the #1 tools company. More than a driving force in outdoor power equipment. More than a global leader in industrial. We’re visionaries and innovators. As successful as we’ve been in the past, we have so much further to go. That’s where you come in. Join us! We Don’t Just Build The World, We Build Innovative Technology Too. Joining the Stanley Black & Decker team means working in an innovative, tech-driven and highly collaborative team environment supported by over 58,000 professionals in 60 countries across the globe. Here, you’ll get the unique chance to impact some of the world’s most iconic brands including STANLEY TOOLS, DEWALT, CRAFTSMAN, MAC TOOLS and Black + Decker. Your ideas and solutions have the potential to reach millions of customers as we work together to write the next chapter in our history. Come build with us and take your career to new heights. Who We Are We’re the World’s largest tool company. We’re industry visionaries. We’re solving problems and advancing the manufacturing trade through innovative technology and our Industry 4.0 Initiative. We are committed to ensuring our state-of-the-art “smart factory” products and services provide greater quality to our customers & greater environmental and social value to our planet. We are unique in that we have a rich and storied history dating back to 1843, but that hasn't stopped us from evolving into a vibrant, diverse, global growth company. Global Benefits & Perks You’ll be rewarded with a competitive salary plus receive entitlements and benefits unique to your country of hire. What You’ll Also Get Career Opportunity: Career paths aren’t linear here. Being part of our global company with 60+ brands gives you the chance to grow and develop your skills along multiple career paths. Learning & Development: Our lifelong learning philosophy means you’ll have access to a wealth of state-of-the-art learning resources, including our Lean Academy and online university (where you can get certificates and specializations from renowned colleges and universities). Diverse & Inclusive Culture: We pride ourselves on being an awesome place to work. We respect and embrace differences because that’s how the best work gets done. You’ll find we like to have fun here, too. Purpose-Driven Company: You’ll help us continue to make positive changes in the local communities where we work and live as well as in the broader world through volunteerism, giving back and sustainable business practices.

Job Title: Embedded Systems Engineer Company: Fuselage Innovations Pvt Ltd Location: Kochi, Kerala Salary: ₹35,000 to ₹45,000 per month (based on experience and qualifications) Experience: 2 to 4 years Employment Type: Full-time, Permanent Company Overview Fuselage Innovations Pvt Ltd is a cutting-edge drone and aeronautical systems company pioneering advanced unmanned aerial solutions. Our team develops innovative drone technologies that push the boundaries of what’s possible in aerial systems, with a focus on the embedded systems that power our products. Position Overview We are seeking an Experienced Embedded Systems Engineer to join our R&D team for the development of mission-critical embedded solutions. The ideal candidate will have a strong foundation in both hardware and firmware development, with the ability to design and implement efficient embedded solutions for products with aeronautical applications. Core Responsibilities This role encompasses end-to-end embedded systems development, including: Designing and developing embedded solutions using various microcontroller platforms, focusing on real-time control systems and flight controllers Creating and optimizing firmware using C/C++ and Python Utilizing development and debugging tools such as E2Studio, STM32CubeIDE, Arduino, VS Code, and CS+ for CA/CC Implementing communication protocols for sensor and actuator integration Conducting thorough system testing and debugging at hardware and firmware levels Collaborating with cross-functional teams for seamless product integration Supporting hardware troubleshooting alongside the hardware team Maintaining clear and comprehensive technical documentation Contributing to process improvements in embedded systems development Technical Requirements Essential Skills & Knowledge Areas: Proven expertise in embedded systems development Strong proficiency in Embedded C/C++ Experience with Python for development and testing Working knowledge of microcontrollers like STM32, Renesas, and ESP series Understanding of Raspberry Pi and similar single-board computers Proficiency in communication protocols: I2C, SPI, UART, CAN, LoRa, RS232, RS485, Modbus (RTU/ASCII) Hands-on experience with debugging tools and diagnostic equipment Familiarity with Git and modern version control workflows Understanding of real-time operating systems (RTOS) concepts Qualifications Education: Bachelor’s degree in Electronics, Electrical, Computer Engineering, or a related field Experience: 2–3 years of hands-on experience in embedded systems development Experience in industrial applications is required Experience in drone or aerospace systems is a plus Core Competencies Strong analytical and problem-solving skills Ability to manage time-sensitive tasks efficiently Excellent technical documentation skills Effective team collaboration and communication Special Considerations While the role focuses on embedded systems development, familiarity with drone technologies and relevant communication protocols is an added advantage. Candidates with prior exposure to UAV systems are encouraged to highlight their experience. However, drone-specific knowledge is not a mandatory requirement for this position. How to Apply Interested candidates can email their resume to hr@fuselage.co.in with the subject line: Application – Embedded Systems Engineer Job Type: Full-time Pay: ₹35,000.00 - ₹45,000.00 per month Schedule: Day shift Supplemental Pay: Performance bonus Experience: total work: 2 years (Required) Work Location: In person

Job Title: Junior Embedded Engineer Experience: 1-2 Years Location: Hyderabad Job Type: Full-Time About Us: Unnayan Defence Technologies is a Hyderabad-based defense startup dedicated to enhancing national security through innovative, homegrown solutions. Our focus on in-house research and development allows us to create proprietary technologies that meet India's defense needs and position us as a leader in global defense exports. Website https://lnkd.in/gTiMJn_7 Job Description: We are looking for a dedicated and skilled Junior Embedded Engineer with 1-2 years of experience to join our team in Hyderabad. The ideal candidate should have hands-on experience in embedded systems, circuit design, and sensor interfacing. Key Responsibilities: Programming in Embedded C and Python. Work with communication protocols such as SPI, I2C, UART, and I2SCAN. Develop applications on Linux-based embedded platforms. Work with microcontrollers and processors like STM32, Raspberry Pi, and PIC. Design and develop analog and digital electronic circuits. Perform circuit testing and PCB assembling. Interface various sensors with microcontrollers. Required Qualifications: Educational Qualification: B.E. / B.Tech in Electronics & Communication Engineering (ECE) related fields from a recognized institution How to Apply send your resume to hr.recruitment@unnayantech.com with the subject line: Application for Junior Embedded Engineer Job Types: Full-time, Permanent Pay: ₹15,294.10 - ₹29,631.38 per month Work Location: In person

Job descriptions may display in multiple languages  based on your language selection. What we offer: At Magna, you can expect an engaging and dynamic environment where you can help to develop industry-leading automotive technologies. We invest in our employees, providing them with the support and resources they need to succeed. As a member of our global team, you can expect exciting, varied responsibilities as well as a wide range of development prospects. Because we believe that your career path should be as unique as you are. Group Summary: Transforming mobility. Making automotive technology that is smarter, cleaner, safer and lighter. That’s what we’re passionate about at Magna Electronics, and we do it by creating world-class Electronic systems. We are a premier supplier for the global automotive industry with full capabilities in design, development, testing and manufacturing of complex Electronic systems. Our name stands for quality, environmental consciousness, and safety. Innovation is what drives us and we drive innovation. Dream big and create the future of mobility at Magna Electronics. Job Responsibilities: JOB SUMMARY The Vision Algorithms Engineer is responsible for development of state-of-the-art camera based real time image processing and computer vision algorithms for Drive Assistance Systems from concept phase to production JOB FUNCTIONS (ESSENTIAL) Development (design, implement, test and debug) of algorithms for core and/or application specific software requirements for automotive embedded electronic module serial production projects Develop software in compliance with a formal ASPICE/CMMi based Global Product Engineering Process (GPEP). Verify algorithms at component and bench level Support rest of the functional disciplines with all aspects related to algorithms Perform detailed work assignments provided by the mentor or team member, by applying established and well defined software engineering techniques. Work assignments primarily involve intermediate work. Performs other duties as necessary in support of business objectives. Ensures that facilities are in full compliance with all safety regulations. Maintains regular attendance. Follows safe work procedures; Uses appropriate personal protective equipment (PPE); Uses workplace tools and equipment as instructed; Reports workplace hazards, injuries and illness as soon as possible following event. Complies with the requirements of Quality Operating System (QOS) Mandatory and Desirable technical skills are listed in Technical section below. JOB REQUIREMENTS Education/Experience Bachelor’s degree in Computer Engineering / Software Engineering / Electronics / Computer Science or equivalent (Master’s preferred) 3-12 years’ relevant experience regarding the Responsibility / Activities (listed above) in serial development. Automotive electronic (mandatory). KNOWLEDGE AND SKILLS Magna Policies and Processes - Core Values Magna Charter & Constitution Code of Conduct and Ethics (including related Guidelines) Quality Policy & Objectives Environmental Policy Statement Health & Safety Orientation (including Safety Policy) New Hire or New Position Orientation Customer - Key Customer Specific Requirements (CSR) – as applicable Review CSR via SharePoint Technical - Must Have Knowledge of product development engineering practices in automotive field Strong working knowledge of conventional image processing and imaging Algorithms Strong experience of C++ programming language Working knowledge in development of portable, reusable and modular software in automotive environment. Experience in using a disciplined software development process based on ASPICE or CMMi process model Knowledge of structured problem solving (8D) methods and/or techniques Strong Troubleshooting and debugging skills Desirable Knowledge of Signal Processing Knowledge of object detection using Yolo/SSD or semantic segmentation using Mask-RCNN/ResNet SLAM – Simultaneous Localisation and Mapping DL (Deep learning) based algorithm development in Imaging domain Knowledge of structured problem solving (8D) methods and/or techniques Knowledge of Model based Design and Development Working knowledge of Mathworks based tools (Matlab, Simulink) Working knowledge of optimisation and porting algorithms to embedded platform based on 32 and 64 bit microcontrollers Computer - Knowledge of MS Office package (especially Excel) Knowledge of analysis and engineering tools such as version control/configuration management, UML tools, static code check tools Working knowledge of configuration management (preferably PTC/MKS), project monitoring and control techniques Awareness, Unity, Empowerment: At Magna, we believe that a diverse workforce is critical to our success. That’s why we are proud to be an equal opportunity employer. We hire on the basis of experience and qualifications, and in consideration of job requirements, regardless of, in particular, color, ancestry, religion, gender, origin, sexual orientation, age, citizenship, marital status, disability or gender identity. Magna takes the privacy of your personal information seriously. We discourage you from sending applications via email or traditional mail to comply with GDPR requirements and your local Data Privacy Law. Worker Type: Regular / Permanent Group: Magna Electronics

Job Summary: We are seeking a skilled and motivated Hardware Engineer to design, develop, and test electronic hardware systems and components. The ideal candidate should have a strong understanding of circuit design, embedded systems, and product development processes. You will work closely with cross-functional teams including software engineers, mechanical engineers, and product managers to deliver robust and high-performance hardware solutions. Key Responsibilities: Design and develop analog and digital electronic circuits. Create schematics and PCB layouts using tools like Altium, OrCAD, or KiCad. Test, debug, and validate prototypes and final products. Select and evaluate electronic components for performance, cost, and reliability. Collaborate with software teams to integrate firmware with hardware platforms. Prepare technical documentation including specifications, test procedures, and reports. Ensure compliance with industry standards and regulatory requirements (e.g., EMI/EMC, RoHS, CE). Support manufacturing teams with test plans, troubleshooting, and production issues. Stay updated on emerging technologies and suggest innovations for new or existing products. Required Qualifications: Bachelor’s or Master’s degree in Electrical Engineering, Electronics, or related field. [1–5+] years of hands-on experience in hardware design and development. Strong knowledge of embedded systems, microcontrollers, and interface protocols (SPI, I2C, UART, etc.). Experience with PCB design and circuit simulation tools. Proficient in using lab instruments such as oscilloscopes, multimeters, logic analyzers, etc. Ability to read and understand datasheets and component specifications. Strong analytical, troubleshooting, and problem-solving skills. Preferred Skills: Experience with high-speed PCB design or power electronics. Knowledge of FPGA or ASIC development. Familiarity with IoT, wireless communication (BLE, WiFi, LTE). Understanding of thermal and mechanical design considerations. Exposure to product certification and compliance processes. Benefits: Competitive salary and performance bonuses Health insurance and wellness programs Opportunities for learning and professional growth Flexible working hours / Remote work options Collaborative and innovative work environment Job Type: Full-time Pay: ₹20,000.00 - ₹50,000.00 per month Benefits: Commuter assistance Food provided Experience: Computer hardware: 2 years (Required) System administration: 3 years (Preferred) Work Location: In person

Job Summary: We are looking for a passionate and motivated Embedded Developer with foundational knowledge in microcontrollers like Arduino, ESP32, and NodeMCU. This is an excellent opportunity for a fresher with basic experience in Arduino programming and a keen interest in working with sensors, communication protocols, and hardware-software integration. You will be involved in developing, testing, and deploying embedded systems for IoT and sensor-based projects. Key Responsibilities: Assist in the design and development of embedded systems using microcontrollers such as Arduino, ESP32, and NodeMCU. Write and debug firmware using the Arduino programming language (C/C++). Interface and integrate sensors (e.g., temperature, humidity) and actuators with microcontroller platforms. Learn and implement communication protocols like I2C, SPI, UART, WiFi, and Bluetooth to connect devices. Qualifications: Basic knowledge of Arduino programming (C/C++) and familiarity with IDEs like Arduino IDE. Understanding of microcontroller platforms such as Arduino, ESP32, and NodeMCU . Hands-on experience or exposure to interfacing sensors and modules. Awareness of communication protocols like I2C, SPI, UART , and wireless protocols (WiFi, Bluetooth). Problem-solving skills with the ability to debug basic hardware and software issues . Ability to understand datasheets, circuit diagrams , and schematics. Basic knowledge of electronics, including voltage, current, and resistance concepts. Job Type: Full-time Pay: ₹20,000.00 - ₹25,000.00 per month Benefits: Flexible schedule Provident Fund Education: Bachelor's (Required) Experience: Firmware Development: 1 year (Required) License/Certification: Embedded Software (Required) Work Location: In person

Work Mode – In Office Location – Sector 62, Noida Internship Tenure – 3 Months (1-3 Months) Apprenticeship Tenure – 3 Months (4-6 Months) Stipend (Internship + Apprenticeship) - 15k per month We are seeking a Hardware Validation & Testing Intern to join our engineering team. This internship offers a hands-on opportunity to work with cutting-edge hardware technologies and contribute to the validation and testing of electronic components and systems. You will gain exposure to industry-standard testing processes and collaborate with experienced engineers to ensure product quality, performance, and reliability. Key Responsibilities: Assist in the development and execution of test plans for hardware components and systems. Perform functional, performance, and environmental tests on prototypes and production units. Collect, analyze, and document test results, identifying anomalies and assisting in root cause analysis. Support root cause analysis in collaboration with hardware and design teams. Ensure all testing follows agile development methodologies and quality standards. Prepare detailed test reports and assist in continuous improvement of validation processes. Follow safety protocols and quality standards during all testing activities. Requirements: Pursuing a degree in Electronics, Electrical Engineering, or a related field (UG/PG). Strong knowledge of hardware components, including microcontrollers, sensors, and PCBs. Knowledge of electronics is a must have Familiarity with agile development and testing frameworks. Strong analytical, problem-solving, and documentation skills. Detail-oriented, with a hands-on approach to lab testing. Ability to work collaboratively in a dynamic, team-oriented environment. Job Type: Internship Contract length: 6 months Pay: ₹15,000.00 per month Schedule: Day shift Ability to commute/relocate: Noida, Uttar Pradesh: Reliably commute or planning to relocate before starting work (Required) Work Location: In person

Job Summary Design and implementation of embedded firmware systems from requirements to production and commercial deployment Develop motor control algorithm including Trapezoidal and FOC. Design and develop software system architecture for efficiency, stability and scalability. Integration, validation and testing of the developed product. Work with hardware design and testing teams to ensure seamless firmware integration. Recommended skills Strong programming and algorithm development skills in embedded C, C++ Proven experience with motor drives like BLDC, PMSM, IM, SRM from previous projects. Experience in embedded software IDE, C++,Communication Inter and Intra Protocols (RS485,UART,CAN), Hands on experience with microcontrollers, including STM and Renesas (AVR & ARM) Experience in hands on development and troubleshooting on embedded targets Familiarity with software configuration management and troubleshooting tools Adequate knowledge of reading schematic and components datasheet Experience with power convertors is a plus. COMPETENCIES: Integrity : Acts ethically and maintains trust. Communication : Clear articulation in spoken and written forms. Self-Starter & Team Player : Motivated, proactive, and collaborative. Positive Energy : Inspires others and exhibits a can-do attitude. Efficiency : Produces significant output with minimal wasted effort and handles pressure well. Attention to Detail : Ensures no detail slips through the cracks. Requirements Experience: minimum 2 years (2 position) Qualification: Graduate or Post graduate in Electrical Engineering (EEE), Electronics and Communication Engineering (ECE),Or any equivalent engineering degree in relevant field

About the Company: Miko is an advanced consumer robotics innovation lab focused on the mission of Bringing Robotics and AI to every consumer home. Founded by young and dynamic entrepreneurs from IIT Bombay, Miko is a global deep tech company with offices in the US, UK, and India, and a customer base across 140+ countries. Focused on taking Robotics and AI to every consumer home, Miko is the first of its kind "content on subscription" hardware platform for kids powered by patented technology. Our latest flagship product, Miko3 (www.miko.ai), is a playful learning robot that engages, educates, and entertains kids. Launched simultaneously across the US, UK, India, and the UAE in 2021, Miko 3 is a unique offering that focuses on the learning and development of the child through self-initiated contextual topics with children to enable conversational learning. It hosts a powerful marketplace for third-party content partners to plug their content and connect with Miko users on subscription. Website: https://in.miko.ai/ Role Summary: We are looking for a proactive and technically sound Electronics Sourcing & NPD Engineer to manage electronic component sourcing, engage with global vendors and partners, and support end-to-end electronics development from concept to mass production. The ideal candidate will have hands-on experience with IC manufacturers, global distributors, PCBA suppliers, and EMS/ODM partners, along with strong working knowledge of fabrication processes and supplier evaluation. Key Responsibilities: Sourcing & Procurement: ● Source ICs (microcontrollers, power ICs, memory, etc.), passives, sensors, and electromechanical components ● Develop and manage strong relationships with IC manufacturers, authorized distributors (e.g., Arrow, Avnet, Mouser, etc.), EMS providers, OEMs and ODMs ● Identify alternate suppliers and components for cost savings and risk mitigation ● Evaluate and select PCBA fabrication partners based on technical capabilities, cost, quality, and lead time ● Negotiate pricing, supply terms, and ensure adherence to procurement and compliance protocols New Product Development (NPD) Support: ● Collaborate with R&D and hardware teams to support component selection during design phases (EVT/DVT/PVT) ● Assist in evaluating component compatibility for wireless protocols: BLE, Wi-Fi, Cellular, etc. ● Provide trade-off analysis for cost, availability, and performance of critical components ● Support prototyping, validation builds, and ramp-up plans in coordination with ODMs/EMS Technical & Compliance Expertise: ● Understand the end-to-end PCBA fabrication process including material selection, PCB stack-up, surface finish, panelization, and testing ● Evaluate PCBA suppliers and fabrication houses for technical and quality competence ● Read and interpret BOMs, electrical schematics, datasheets, and fabrication files ● Ensure REACH, RoHS, and relevant environmental & material compliance are met ● Manage PCN/EOL processes, obsolescence planning, and technical change control ● Work with cloud-based BOM management platforms: Altium 365, SiliconExpert, SourceEngine, etc. Program & Data Management: ● Act as sourcing lead for RFIs, RFQs, and RFPs across all NPD projects ● Maintain clean, up-to-date component data and lifecycle status ● Work with planning and warehouse teams to ensure component availability for builds ● Collaborate cross-functionally with global supply chain and procurement teams Key Interfaces: ● Internal: Engineering, Project Management, Operations, Product ● External: Component Manufacturers, Distributors, EMS/ODM Partners, PCBA Suppliers, Brokers Skills & Competencies: ● Deep understanding of electronic components, PCBA assembly, and sourcing lifecycle ● Strong exposure to global component markets and distributor ecosystems ● Ability to evaluate PCBA fabrication vendors for quality, cost, and compliance ● Working knowledge of Incoterms, customs documentation, vendor onboarding ● Effective communicator with cross-functional and external stakeholders ● Analytical and detail-oriented with strong negotiation skills Qualifications: ● B.E./B.Tech in Electronics or related field with 2–4 years of sourcing or NPD experience OR ● Diploma in Electronics Engineering with 5–7 years of relevant experience ● Prior experience working with EMS/ODM and understanding of PCBA fabrication is a must

We’re Hiring! Embedded Systems Trainer – Pune Region Are you passionate about Embedded Systems, Microcontrollers, and IoT? Do you love teaching and mentoring future engineers? Join us at CADD CENTRE as an Embedded Systems Trainer and help shape the next generation of tech professionals! 📌 Role: Sr. Embedded Instructor 📍 Location: Pune, MH 📍 Employment Type: Full Time, Permanent 🔹 What You’ll Do: ✅ Conduct training sessions in Embedded C, C++ (Must) ✅ Teach ARM Microcontrollers – PIC, STM32, Raspberry Pi 5, Beagle Bone etc., ✅ Design hands-on projects in Embedded Systems & IoT ✅ Guide students on debugging, simulation, and hardware integration ✅ Stay updated with emerging technologies and enhance course materials ✅ Bonus: Knowledge of Device Drivers, RTOS & Embedded Linux is a plus! 🔹 What We’re Looking For: 🔸 Master’s degree in Electronics, Electrical, or related fields 🔸 Strong expertise in Embedded Systems programming & Microcontroller architecture 🔸 Hands-on experience with Keil, Proteus, and STM 🔸 5+ years of industry or teaching experience 🔸 Excellent technical and communication skills 🔸 Passion for Teaching, Automotive Embedded, Robotics, Edge AI etc., 🔸 Language Requirements: English + Marathi

Job Title: Embedded Systems Engineer Company: Fuselage Innovations Pvt Ltd Location: Kochi, Kerala Salary: ₹35,000 to ₹45,000 per month (based on experience and qualifications) Experience: 2 to 4 years Employment Type: Full-time, Permanent Company Overview Fuselage Innovations Pvt Ltd is a cutting-edge drone and aeronautical systems company pioneering advanced unmanned aerial solutions. Our team develops innovative drone technologies that push the boundaries of what’s possible in aerial systems, with a focus on the embedded systems that power our products. Position Overview We are seeking an Experienced Embedded Systems Engineer to join our R&D team for the development of mission-critical embedded solutions. The ideal candidate will have a strong foundation in both hardware and firmware development, with the ability to design and implement efficient embedded solutions for products with aeronautical applications. Core Responsibilities This role encompasses end-to-end embedded systems development, including: Designing and developing embedded solutions using various microcontroller platforms, focusing on real-time control systems and flight controllers Creating and optimizing firmware using C/C++ and Python Utilizing development and debugging tools such as E2Studio, STM32CubeIDE, Arduino, VS Code, and CS+ for CA/CC Implementing communication protocols for sensor and actuator integration Conducting thorough system testing and debugging at hardware and firmware levels Collaborating with cross-functional teams for seamless product integration Supporting hardware troubleshooting alongside the hardware team Maintaining clear and comprehensive technical documentation Contributing to process improvements in embedded systems development Technical Requirements Essential Skills & Knowledge Areas: Proven expertise in embedded systems development Strong proficiency in Embedded C/C++ Experience with Python for development and testing Working knowledge of microcontrollers like STM32, Renesas, and ESP series Understanding of Raspberry Pi and similar single-board computers Proficiency in communication protocols: I2C, SPI, UART, CAN, LoRa, RS232, RS485, Modbus (RTU/ASCII) Hands-on experience with debugging tools and diagnostic equipment Familiarity with Git and modern version control workflows Understanding of real-time operating systems (RTOS) concepts Qualifications Education: Bachelor’s degree in Electronics, Electrical, Computer Engineering, or a related field Experience: 2–3 years of hands-on experience in embedded systems development Experience in industrial applications is required Experience in drone or aerospace systems is a plus Core Competencies Strong analytical and problem-solving skills Ability to manage time-sensitive tasks efficiently Excellent technical documentation skills Effective team collaboration and communication Special Considerations While the role focuses on embedded systems development, familiarity with drone technologies and relevant communication protocols is an added advantage. Candidates with prior exposure to UAV systems are encouraged to highlight their experience. However, drone-specific knowledge is not a mandatory requirement for this position. How to Apply Interested candidates can email their resume to hr@fuselage.co.in with the subject line: Application – Embedded Systems Engineer Job Type: Full-time Pay: ₹35,000.00 - ₹45,000.00 per month Schedule: Day shift Supplemental Pay: Performance bonus Experience: total work: 2 years (Required) Work Location: In person

We are looking for a hands-on Embedded Systems & Robotics Engineer with a strong foundation in both embedded software development and robotic hardware wiring . The ideal candidate should be proficient in Arduino, ESP32, STM32, and Raspberry Pi Pico , have experience with Linux-based embedded platforms , and be familiar with motor control systems and sensor interfacing . This role is ideal for someone passionate about building and debugging robotic platforms from the ground up, with the ability to work across both electronics hardware and low-level software . Key Responsibilities: Design, develop, and debug embedded firmware in C, Embedded C, Python, Arduino C . Work with microcontrollers like Arduino, ESP32, STM32, Raspberry Pi Pico , and embedded platforms like Raspberry Pi and Jetson Nano . Perform industrial/robotic panel wiring , including integration of sensors, motors , and power electronics . Develop and test motor control solutions (DC, stepper, servo). Interface with analog and digital sensors using I2C, SPI, UART communication protocols. Deploy code and manage systems on Linux OS for RPi/Jetson-based control units. Read and create schematics and PCBs , assist in board bring-up and hardware testing. (Optional but desirable) Work on OpenCV-based computer vision , perception, or robotic alignment tasks. Collaborate with the mechanical and software team for complete robot development cycles . Preferred but Not Mandatory: Experience with Jetson Nano , camera modules , or robot navigation software . Knowledge of MicroPython . Basic knowledge of OpenCV or image processing tools. Exposure to robot design lifecycle or mechatronics integration projects . Job Types: Full-time, Fresher Pay: ₹300,000.00 - ₹500,000.00 per year Schedule: Fixed shift Supplemental Pay: Overtime pay Ability to commute/relocate: Dombivli, Maharashtra: Reliably commute or willing to relocate with an employer-provided relocation package (Preferred) Education: Bachelor's (Preferred) Work Location: In person Speak with the employer +91 8169196916

Description We are seeking an experienced Embedded Software Engineer to join our dynamic team in India. The ideal candidate will be responsible for designing and developing embedded software for a variety of applications, ensuring seamless integration with hardware components. Responsibilities Design, develop, and test embedded software systems for various applications. Collaborate with hardware engineers to integrate software with hardware components. Debug and troubleshoot embedded systems to ensure optimal performance. Participate in code reviews and maintain code quality standards. Document software designs, processes, and code for future reference and compliance. Skills and Qualifications Bachelor's or Master's degree in Computer Science, Electronics Engineering, or a related field. 3-7 years of experience in embedded software development. Proficiency in programming languages such as C, C++, and Python. Strong understanding of microcontrollers and microprocessors. Experience with real-time operating systems (RTOS) and embedded Linux. Knowledge of hardware interfaces like SPI, I2C, UART, and GPIO. Familiarity with debugging tools and methodologies for embedded systems. Ability to work in a team environment and communicate effectively.

Role & Responsibilities 1. Design of hardware architecture of BLDC and PMSM Motor controllers (ESC) for UAV application 2. Responsible for the Circuit Simulation, Thermal Analysis, Schematic capture and PCB Design. 3. Design of MOSFET, IGBT, BJT gate drivers, Current measurement techniques 4. Selection of semiconductor like MOSFET, IGBT, Transistors, Buck converters, LDO etc 5. Functionality, performance and life cycle testing of PCB Recommended skills 1. Proven experience in working with motor drives like BLDC, PMSM, IM, SRM from past projects or projects 2. Familiarity testing and measuring equipment like DMM, DSO etc 3. Knowledge on microcontrollers like AVR & ARM, STM and Renesas will be added advantage 4. Idea on Communication Inter and Intra Protocols (RS485,UART,CAN) 5. ECAD Software - Hardware design software like Eagle, Kicad, Altium etc 6. Should familiar with embedded software IDE, C++ is added advantage 7. Should have hands-on experience in Through Hole and SMD Soldering. COMPETENCIES: Integrity : Acts ethically and maintains trust. Communication : Clear articulation in spoken and written forms. Self-Starter & Team Player : Motivated, proactive, and collaborative. Positive Energy : Inspires others and exhibits a can-do attitude. Efficiency : Produces significant output with minimal wasted effort and handles pressure well. Attention to Detail : Ensures no detail slips through the cracks. Employment type : Full Time Requirement : Experience of 0-1 Yrs (1 Position) Experience of 1-3 Yrs (1 Position) Qualification: Graduate or Postgraduate in Electrical Engineering (EEE), Electronics and Communication Engineering (ECE) Or any equivalent engineering degree in relevant field

About Lumenci Lumenci is the technology industry's most strategic patent monetization partner. We work with the world's top technology companies, law firms, inventors, and start-ups to find value in their inventions and help them pursue—and defend—that value throughout the ideation to monetization lifecycle. We help clients convert innovation into patent portfolios and identify their best monetization opportunities. We work with a wide variety of technologies, including hardware and software, telecom, networking, and biotech technologies. Lumenci combines technology domain expertise with strategic industry connections to guide towards the best route to ROI. From ideation to monetization -- we illuminate the way. Job Summary We are seeking an Associate to join our growing technical team in Gurugram, India. This role requires a minimum of 1 year of experience with strong expertise in Semiconductor technologies, technical research, and intellectual property (IP)-related matters. This role is well-suited for individuals who are passionate about technology, thrive in a high-growth startup environment, and enjoy a hands-on approach with the latest tech innovations. Responsibilities And Duties Provide technology consulting services to law firms and corporate clients, helping to solve complex technical queries. Understand underlying technologies to analyze patent portfolios. Experience with IP matters (infringement analysis, EOUs, prior art searches, landscaping, etc.). Proficiency in Semiconductor technologies including Microprocessors, Microcontrollers, Memory, SoC, FPGA, ASIC, and VLSI. Strong understanding of semiconductor fabrication, circuit design, and electronic components. Explain complex technology matters to non-technical audiences. Work with product teams to guide the development & testing of Lumenci’s technology platforms. Showcase technology and IP thought leadership via blogs and research reports. Collaborate across the organization in-person and with virtual, global teams. Establish and cultivate relationships internally and externally. Expected Competencies And Skills Excellent verbal and written communication skills. Expert level Proficiency in technical research. Strong attention to detail. Customer-oriented approach. Problem-solving aptitude. Ability to think critically, learn fast and work with minimal supervision under tight deadlines. Entrepreneurial and go-getter attitude. Education And Experience BTech/MTech/PhD in Electronics, Communications, or related fields from premier colleges such as IITs, BITS, and NITs. 1-3 years of experience in relevant Tech industry e.g. Semiconductor, Embedded Systems, Chip Design, VLSI, and EDA tools. Do you share the way we work? Solve for the Customer: Our success is tied to our customers' success. We prioritize service and aim to establish lasting relationships with our clients. Quality, Ownership, and Accountability: We take ownership of our projects and strive for excellence. We value and reward team members who contribute to client success. Collaboration: We foster collaboration over competition, working in small teams and supporting each other whenever needed. Growth Mindset: We're passionate about constant learning and improvement. We're dedicated to supporting your professional growth and adapting to the changing requirements of a dynamic, high-growth company. Why You Will Love Working For Lumenci Be Part of a Global Team: Joining Lumenci means joining a diverse and globally distributed team. You'll collaborate with talented individuals from different backgrounds and cultures, bringing unique perspectives to every project. Growth and Development Opportunities: At Lumenci, we believe in recognizing and rewarding merit. We offer opportunities for merit-based promotions, allowing you to advance your career based on your performance, contributions, and dedication. We are committed to supporting your professional growth and development, providing the resources and mentorship needed to excel in your role and take on new challenges. Competitive Pay & Benefits: Competitive market salary commensurate with experience and qualifications. Other benefits include paid leave, wellness leave, parental leave, birthday leave, and flexi leave, health and personal accident insurance, and health, vision, and dental checkups. Skills: memory,soc,infringement analysis,microcontrollers,collaboration,technical research,landscaping,fpga,semiconductor,semiconductor technologies,communication skills,vlsi,research,asic,intellectual property (ip) analysis,electronic components,microprocessors,technology,circuit design,ip,prior art searches

Responsibilities: Teach Robotics to kids from grades 1 to 12. Teach the students on how to build and experiment with the projects based on our curriculum guide. Knowledge of coding (logic, sequence, and structure) to create Games, Animations, IOT Apps, working robotics project Model . Must be able to teach Arduino, Quarky, Micro bit and other microcontroller programming in Pictoblox, Maker code , Tinker cad platform. Should be able to handle the student&aposs technical doubts. Must have good technical knowledge of all the sensors, actuators, microcontrollers, and electrical and electronics engineering fundamentals. Must have analytical and troubleshooting thinking. Good communication skills in teaching and handling International Students. Qualifications He/she should have a degree in Robotics and Automation, Electrical and Telecommunications, Electrical and Electronics Engineering, and Mechatronics Engineering. Basic knowledge Block Coding (Scratch), Arduino, Raspberry Pi, Microcontrollers. Candidates with a Computer Science and Mechanical Engineering background are also eligible to proceed. Confident & presentable with good oratory skills and software and programming subject matter expertise would be preferred. High-speed internet connection (minimum 20 Mbps) & modern laptop/PC with microphone and camera. Shifts: 10pm to 7am IST 8pm to 5am IST Show more Show less

We are happy to inform you that KL University having an immediate requirement for Electronics & Communication Engineering Department. KLU one of the most prestigious and preferred universities located in Guntur, in the state of Andhra Pradesh, India K L&aposs Deemed to be University has been ranked 35 among all IITs, IIMs, NITs and other premier institutes of India by MHRD, through NIRF rankings. K Ls Engineering College KLCE is ranked No.1 by Times of India (TOI) in both Telangana and Andhra Pradesh and is known for its consistent 100% placement record to all eligible students for the past 14 years. Job Title: Professor / Associate Professor / Assistant Professor Departments: Electronics & Communication Engineering Qualification: BE/B.Tech in ECE ME/M.Tech in ECE Ph.D -ECE Specializations: Embedded Systems Internet Of Things Microprocessors Microcontrollers Experience: 5+ Years Interested candidates kindly share your updated CVs to cvimala@kluniversity or reach me on 7981337620 -Vimala Ch Assistant Manager HR KL University for any queries. Show more Show less

About the Role: We are a group of IITM alumni incubated at IIT Madras, developing a unique Knee Health Report Card—a system that blends biomechanics, sensor data, and anatomical insight into the evaluation of knee performance and condition. We're looking for an enthusiastic, self-driven, cross-disciplinary specialist who can join our core team and think creatively, build robust physical systems, and interact effectively with test subjects. This is not a routine engineering job—we’re looking for someone who can merge science, design, and innovation, and help bring a new kind of health product to life. Key Responsibilities: Analyse biomechanics and gait patterns to identify functional markers of knee health. Apply a deep understanding of muscle function and anatomy, especially the lower-limb musculoskeletal systems. Design and prototype embedded systems using sensors, microcontrollers, and data capture tools. Design and model mechanical components using CAD tools (e.g., Fusion 360, SolidWorks). Create anatomical and motion visualizations using Blender for internal use and presentation. Implement and test robust physical prototypes (e.g., wearable devices, mechanical mounts, sensor rigs). Work directly with human subjects—setup, guide through tests, and collect data effectively. Collaborate in defining and refining the Knee Health Report Card scoring/reporting system. Required Skills & Experience: 2+ years and Strong background in biomechanics, gait analysis, and functional anatomy. Experience in embedded electronics: sensors, Arduino/Raspberry Pi, signal processing (bonus) Proficiency in CAD design (Fusion 360, SolidWorks, etc.). Working knowledge of Blender for 3D visualization and animation. Understanding of muscle dynamics, EMG data, or motion capture systems is a plus. Ability to design, prototype, and test physical hardware solutions. Comfortable interacting with human test subjects. Background in biomedical engineering, sports science, or physiotherapy. Why Join Us? This is a rare opportunity to work on a revolutionary health startup that merges physical movement science with real-time data systems. You’ll be part of a dynamic and active team with a common vision to improve lives through holistic joint health awareness!

Location – Bangalore Experience – 8+ years Work mode- Onsite, immediate Notice period – 15- 30 days Your Responsibilities  Development and maintenance of embedded software in C/C++ for microcontroller- based systems.  Programming and configuration of STM32 microcontrollers (Cortex-M0+, M4, M33).  Implementation of device drivers, peripheral interfaces, and communication protocols (UART, SPI, I²C, etc.).  Adaptation and optimization of existing product software.  Software integration and testing on target hardware.  Conducting Unit-Tests and Code Reviews.  Driving and contributing to the test strategy.  Design and maintenance of the development ecosystem and CI/CD pipelines using GitLab/Jenkins.  Setup, maintenance, and continuous improvement of embedded toolchains (compilers, linkers, debuggers, build systems).  Optimization and integration of embedded IDEs (e.g., JetBrains CLion, VS Code) with appropriate plugins.  Evaluation and documentation of tools, and creation of development guidelines.  Collaboration with cross-functional teams (mechanics, electronics, testing, hardware).  Future outlook: Participation in setting up a Linux-based toolchain and training colleagues. Your Profile  Degree in Computer Science, Electrical Engineering, or equivalent qualification.  Strong proficiency in C and C++, preferably in embedded software development.  Experience in STM32 microcontroller families (especially Cortex-M0+, M4, M33).  Experience with embedded development toolchains, IDEs (CLion, VS Code), and CI/CD systems.  Familiarity with Unit-Test frameworks (e.g., Google Test).  Solid understanding of schematics, technical datasheets, and reference manuals.  Strong proficiency in Linux OS.  Open-minded, structured, independent working style and strong team player.  Good communication skills in English (German is a plus). Soft Skills  Open-minded, willing to learn, and forward-looking attitude.  Curious, questioning the status quo, and proactive in sharing ideas.  Analytical thinking and structured approach.  Team-oriented with a security-focused and test-driven development mindset. Motivation & Role Impact You will contribute to the core embedded systems framework by implementing the complete hardware abstraction layer. Your work will enable application developers to access microcontroller features more efficiently and will support a highly modular and reusable software environment across product lines. Tech Stack Programming Languages  C – hardware-based programming  C++11 to C++17 or higher  Python (used in toolchain and scripting) Microcontrollers & Processors  STM32H5 (ARM Cortex-M33, 250 MHz)  STM32U5 (ARM Cortex-M33, 160 MHz)  STM32F4xx  STM32F103  Cortex M0+, M4, M33 (general) RTOS  Segger embOS (must have)  Zephyr RTOS (nice to have for future development) IDE, CI/CD & Build Tools  JetBrains CLion, VS Code  CMake, Make  Jenkins  Git, GitLab  JetBrains IDEs, Upsource  Jira Software, XRay Debuggers & Tools  J-Link Debugger (SEGGER)  ST-LINK/V3 Debugger  STM32CubeMonitor Interfaces & Communication  CAN (Controller Area Network)  IO-Link  Modbus (TCP)  EtherCAT / PROFINET / OPC UA  I²C, SPI, UART Security & Certifications  Secure Boot & Secure Firmware Update (SFI/SFU) – STM32H5 supported  TrustZone for Cortex-M33 (secure/insecure application separation)  AES-256 & SHA-512 Hardware Encryption  ISO 61508 / IEC 62443 – Safety & Security Standards Job Types: Full-time, Permanent Pay: ₹100,000.00 - ₹2,200,000.00 per year Benefits: Paid sick time Paid time off Provident Fund Work from home Schedule: Day shift Fixed shift Monday to Friday UK shift Supplemental Pay: Performance bonus Application Question(s): How many years of experience do you have in total? What's your current CTC? What's your expected CTC? What is your notice period? Experience: Embedded software: 8 years (Preferred) Work Location: In person

Job Position: STEM and Robotics Trainer (IoT, Embedded Systems, Robotics & Automation) Location: Lucknow, Uttar Pradesh Position Type: Full-Time (Number of positions – 02) Important: Please apply only if you meet the following criteria : You have a B.E./B.Tech degree in Electronics Engineering , or You have strong hands-on experience in robotics, automation, IoT, or embedded systems . Applications that do not meet these qualifications will not be considered , and you will not receive an interview call . We appreciate your understanding and thank you for helping us respect everyone’s time by applying only if your profile aligns with these requirements. Experience: 0-2 years Freshers can also apply having relevant exposure through participating in university-level clubs and competitions and taking the lead in the final year projects. Remuneration: Fresher: ₹25,000 per month Experienced: ₹35,000 to 40,000 per month Please apply only if this salary range aligns with your expectations. We are very strict about our budget, and applying outside this bracket would simply waste each other’s time . Thank you for understanding. About NimbleQ: NimbleQ is an innovation-led ed-tech company reimagining education by combining theory with real-world application, empowering students with 21st-century skills. With programs impacting over 75 lakh students, NimbleQ has supported the launch of 18 student-led startups by students in Grades 3 to 9 , and has already filed 9 patents based on their innovations. We have delivered over 150,000 hours of learning engagement and driven transformative education across private and government school ecosystems. Our students have been invited to Abhivyakti —the annual innovation showcase organized by IIT Kanpur —in recognition of the merit of their ideas and the quality of their product prototypes. This reflects the depth of innovation and hands-on learning we cultivate from an early age. Role Overview: We are seeking motivated individuals with a strong foundation or interest in idea-to-product development , especially in the areas of IoT, embedded systems, robotics, and automation . You will work closely on transforming early-stage ideas into functional prototypes and deployable products for educational and consumer use. This role provides hands-on exposure not just to technical development but also to classroom integration, user feedback cycles , and training delivery —bridging the gap between innovation and real-world impact. Key Responsibilities: Idea to Product Development: Collaborate in the full product lifecycle—from concept and prototyping to testing and final deployment—focused on educational use cases in IoT, automation, and robotics. Lab Setup & Deployment: Support configuration and rollout of robotics, IoT, and automation labs in schools, ensuring they are safe, functional, and ready for student use. Training & Teaching: Conduct engaging sessions for school students and teachers to demonstrate prototypes and explain foundational STEM/engineering concepts. Field Testing & Feedback: Deploy and test early prototypes in real classroom settings, gather user insights, and contribute to product improvement. Team Collaboration: Work with internal teams on product design, documentation, content development, and implementation support. Who Should Apply: B.E./B.Tech students in Electronics engineering . Strong interest or experience in robotics, automation, IoT, or embedded systems . Prior experience with DIY projects, hackathons, or technical clubs is a plus. Comfortable working hands-on with circuits, sensors, microcontrollers (Arduino, Raspberry Pi, ESP32), and prototyping tools. Excellent communication skills with a passion for teaching and working with school students and teachers . Willingness to travel locally for lab setup, teaching sessions, and field deployments. Why Join NimbleQ? End-to-End Product Exposure: Be part of the full cycle—from idea to working product deployed in classrooms. Training & Teaching Experience: Build confidence in instructional delivery while engaging young learners. Skill Development: Gain hands-on experience with cutting-edge technologies in a real-world setting. High-Impact Work: Contribute to transforming education through innovation and shape the next generation of problem-solvers. Recognition & Growth: Work in a fast-growing ecosystem where your work can lead to real-world patents, competitions, and showcases like IIT Kanpur’s Abhivyakti .

Job Description About ASM Auto: We are seeking talented and motivated individuals to join our team in developing cutting-edge solutions with Application-Specific Microcontrollers (MCUs) for the rapidly evolving automotive industry. Our MCUs power a wide range of critical vehicle functions, including traction control, onboard charging (OBC) and DC-DC converters, advanced lighting systems, body control modules, engine management, and braking systems. Additionally, we are at the forefront of innovation with zonal microcontrollers designed to enable software-defined vehicles, paving the way for greater functionality, scalability, and efficiency. Our products shape the future of automotive technology and create impactful solutions for modern mobility challenges. https://www.ti.com/applications/automotive/overview.html Role: Senior Design Engineer (RTL) We are looking for an experienced Senior RTL Design Engineer to join our team in developing cutting-edge automotive microcontroller solutions. The ideal candidate will have deep understanding of RTL design and SoC integration, particularly in the context of ARM-based architectures, and a proven ability to collaborate across multiple engineering disciplines to deliver high-quality solutions for complex systems. Key Responsibilities Define and develop microarchitecture for various subsystems, including CPU subsystems, low-power subsystems, and Reset & Clock Management modules. Own SoC integration for automotive MCUs, ensuring efficient, scalable designs. Collaborate with IP teams, Systems, and Architecture teams to derive requirements, co-develop microarchitecture, and align on design goals for IPs, subsystems, and SoC. Work closely with cross-functional teams such as Design Verification (DV), Design for Testability (DFT), Emulation, and Physical Implementation to ensure quality deliverables. Participate in debug sessions, design reviews, and ensure design robustness and compliance with industry standards. Qualifications Qualifications and Skills Required: Education: Bachelor’s or Master’s degree in Electrical Engineering (EE), Electronics & Communication Engineering (ECE), Computer Science (CS), or a related specialization. Experience: 2-5 years of hands-on experience in RTL development for IPs and SoCs. Technical Expertise Experience in SoC integration with ARM processors and ARM bus architectures. Good understanding of SoC reset and clocking architectures. Experience with standard interfaces like SPI/QSPI, I2C, Debug/Trace, CAN, and others. Expertise in industry-standard front-end (FE) tools and flows, including Lint, CDC, LEC, and power estimation tools such as Jasper Gold, Conformal, Joules, etc. Knowledge of DFT concepts and ability to design for testability. Good understanding of constraints, timing analysis, and optimization techniques. Proficiency in system verilog and verilog. Experience with industry-standard simulators (e.g., Incisive) and formal verification tools. Soft Skills Exceptional problem-solving and debugging skills. Strong written and verbal communication skills for effective collaboration and reporting. Ability to work in a team-oriented environment and guide junior engineers when needed. Preferred Qualifications Experience in automotive-grade SoC designs and compliance with ISO 26262 (Functional Safety) standards. Familiarity with power management techniques and low-power design principles. Knowledge of scripting languages such as Python, Perl, or TCL for automation. About Us Why TI? Engineer your future. We empower our employees to truly own their career and development. Come collaborate with some of the smartest people in the world to shape the future of electronics. We're different by design. Diverse backgrounds and perspectives are what push innovation forward and what make TI stronger. We value each and every voice, and look forward to hearing yours. Meet the people of TI Benefits that benefit you. We offer competitive pay and benefits designed to help you and your family live your best life. Your well-being is important to us. About Texas Instruments Texas Instruments Incorporated (Nasdaq: TXN) is a global semiconductor company that designs, manufactures and sells analog and embedded processing chips for markets such as industrial, automotive, personal electronics, communications equipment and enterprise systems. At our core, we have a passion to create a better world by making electronics more affordable through semiconductors. This passion is alive today as each generation of innovation builds upon the last to make our technology more reliable, more affordable and lower power, making it possible for semiconductors to go into electronics everywhere. Learn more at TI.com . Texas Instruments is an equal opportunity employer and supports a diverse, inclusive work environment. If you are interested in this position, please apply to this requisition. About The Team TI does not make recruiting or hiring decisions based on citizenship, immigration status or national origin. However, if TI determines that information access or export control restrictions based upon applicable laws and regulations would prohibit you from working in this position without first obtaining an export license, TI expressly reserves the right not to seek such a license for you and either offer you a different position that does not require an export license or decline to move forward with your employment.

🚀 Aerodynax is Hiring: On-Site Electronics Intern (1-Month Internship) 🛩️ Are you passionate about electronics, schematics, and UAV systems? Want to get hands-on experience building the next generation of flying technology? We at Aerodynax are looking for a dedicated Electronics Intern to join our team in the development of an autonomous flying wing. This is a great opportunity to work on real-world aerospace challenges. 🛠️ Your Role Will Include: 🔧 Designing and interpreting circuit schematics ⚡ Working on power systems and signal conditioning 📟 Integrating sensors, servos, ESCs, and microcontrollers 🔌 Assisting in development of PID flight stabilisation system 🎓 Perks You'll Receive: ✅ Letter of Recommendation (LOR) ✅ Letter of Appointment ✅ Completion Certificate ✅ Real-world project experience in aerospace R&D 📍 Location: On-site at Malviya Nagar, Jaipur 📅 Duration: 1 Month 📬 To Apply: Send your resume and a short intro to aerodynax@gmail.com 👨‍🔧 Who Should Apply? Electronics or aerospace enthusiasts (students/freshers) with basic knowledge of circuit design and an eagerness to learn by doing. Let’s build the future of flight—together. ✈️ #Aerodynax #ElectronicsInternship #UAVDesign #FlyingWing #JaipurInternship #CircuitDesign #AerospaceInternship #OnSiteInternship #EngineeringInternship