12 Machine Operations Jobs

1. Develop CNC programs for vertical machining centers (VMCs) using DELCAM software based on engineering drawings and specifications. 2. Set up and configure VMC machines including tooling, fixtures, and workpieces to ensure accurate production runs. 3. Monitor machine operations, make necessary adjustments, and conduct quality checks to meet production goals and quality standards. 4. Collaborate with engineers and production teams to troubleshoot issues, optimize machining processes, and ensure efficient workflow. 5. Adhere to safety protocols, maintain equipment, and uphold cleanliness standards in the work area.

The CNC Machine Operator is responsible for operating manual and automated CNC machines in a manufacturing environment to meet quality and productivity standards. This role requires adherence to safety protocols, quality procedures, and production targets while maintaining a clean and organized work area. The operator works with limited guidance and collaborates with cross-functional teams to ensure smooth operations. Key Responsibilities Health, Safety & Environmental (HSE) Immediately stop work and report any major injury hazards or incidents. Comply with all HSE standards, policies, procedures, and regulations. Use appropriate personal protective equipment (PPE). Participate in HSE training and promote a culture of safety and environmental responsibility. Identify and correct hazards within control and capability. Minimize environmental impact through responsible work practices. Quality Follow standard work procedures, including Statistical Process Control (SPC), poka-yoke, and visual standards. Perform quality inspections and identify non-conforming materials. Raise quality issues to minimize cost and exposure. Ensure compliance with all quality documentation and processes. Delivery Operate CNC machines (e.g., Mazak, Grob, MAG) to manufacture and assemble products to meet customer specifications. Achieve production goals and maintain required cycle times. Perform routine housekeeping and machine maintenance tasks. Remain flexible and perform additional duties as needed to meet production targets. Collaborate with peers and support teams to identify and address equipment issues. Teamwork Communicate effectively with team members and support staff. Complete required training and personal development activities. Actively contribute to continuous improvement in quality, safety, and process efficiency. External Qualifications and Competencies Core Competencies Communicates Effectively Clearly conveys information tailored to different audiences. Courage Willing to address difficult issues and speak up when necessary. Drives Results Consistently meets or exceeds performance goals. Ensures Accountability Takes responsibility for actions and outcomes. Health and Safety Fundamentals Promotes and models safe work behaviors. Manufacturing Knowledge Applies knowledge of manufacturing processes to improve operations. Values Differences Appreciates and leverages diverse perspectives and backgrounds. Qualifications High school diploma or certificate of completion of secondary education or equivalent experience. This position may require licensing for compliance with export controls or sanctions regulations. Additional Responsibilities Unique to this Position Skills and Experience Minimum 3-4 years of experience operating CNC machines in an industrial setting. Experience with Mazak, Grob, and MAG machines is preferred. Willingness and ability to work in rotational shifts. Intermediate knowledge of manufacturing processes and machine operations. Strong attention to detail and commitment to quality. Ability to work independently and as part of a team in a fast-paced environment.

Role Overview: We are seeking motivated and skilled Production Operators for our Hyderabad manufacturing plant. The selected candidates will be responsible for operating machinery, maintaining production quality, and supporting smooth workflow on the shop floor. This is a hands-on role ideal for individuals with experience in cable manufacturing or similar production environments. Key Responsibilities: Operate machines such as stranding, extrusion, armoring, sheathing, or ribbonizing based on shift assignment. Monitor production parameters and machine settings to ensure quality output. Perform visual inspection of in-process and finished cables to detect defects. Handle raw materials, load machines, and manage spools or reels as required. Record daily production data and downtime logs accurately. Follow Standard Operating Procedures (SOPs) and quality control guidelines. Ensure cleanliness and orderliness of the work area (5S compliance). Report any equipment issues or safety hazards to the supervisor immediately. Assist in changeovers, maintenance shutdowns, and new product trials as required. Key Requirements: Qualification: ITI / Diploma / 12th Pass with relevant experience. Experience: 1-4 years in cable manufacturing, extrusion, or related industries preferred. Ability to work in rotating shifts (Day/Night) as per plant requirements. Basic knowledge of machine operations and safety protocols. Physically fit and able to stand for long durations. Key Competencies: Machine Handling & Operation Quality Awareness Discipline & Punctuality Teamwork Safety Compliance Willingness to Learn

Key Responsibilities: Set up CNC machines according to work orders and blueprints. Operate CNC machines to produce parts meeting quality standards. Monitor machine operation to detect malfunctions or deviations. Perform routine maintenance and cleaning of CNC equipment. Inspect finished products for accuracy and quality using measuring tools. Adjust machine settings as needed to meet specifications. Maintain accurate production records and logs. Follow safety protocols and company procedures. Collaborate with engineers and quality control to resolve issues. CNC Operators: Freshers With DME or ITI passed candidates can apply. Candidates willing to work for a period of two years as a CNC machine trainee.

Position Overview: The Fitting Technician at will be responsible for managing the entire lab operations, ensuring precise fitting of spectacles according to customer orders, and coordinating with various teams to meet delivery timelines. The ideal candidate will be detail-oriented, with strong organizational skills and the ability to maintain high standards of quality and efficiency. Min 2 years of fitting experience required.

Job Summary: As part of a formal skilled trades training program, assists site Machinist skilled trades to learn and develop tool room skills in a manufacturing environment under direct guidance. Apprentice will be required to successfully complete and document specified classes and a minimum quantity of on the job training hours. Learns and understand the protocols of working safely with electricity and other energy sources with industrial equipment. Key Responsibilities: Health, Safety & Environmental (HSE) Stop work and immediately report any major injury hazards. Report any work-related injury, illness, incident or hazard. Comply with HSE standards, policies, procedures and regulations. Use appropriate personal protective equipment. Promote interdependence by looking out for one another. Correct hazards within your control and capabilities. Recognize how your work may impact the environment and work to minimize the negative impact. Engage in HSE Training. Quality Learns and applies high standards of workmanship and craftsmanship. Support equipment uptime and downtime failure analysis. Performs supervised work in accordance with diagrams, sketches, operation manuals and specifications using various tools, measuring and testing instruments. Provide feedback into the Preventive Maintenance system. Follows all process documentation and quality procedures. Raises issues to minimize cost and quality exposures. Performs quality inspections. Delivery Attends classes required to build basic tool room skills and knowledge to qualify as a Machinist. Completes all required on the job training hours. Repairs and maintains manufacturing equipment and other miscellaneous duties within their capabilities . Assists with preventive, emergency, corrective and predictive maintenance activities. Maintains clean and orderly work area, including routine housekeeping and machine cleaning tasks. Identify and reduce manufacturing constraints Solve problems and improve processes Participate in continuous improvement activities Teamwork Communicates effectively with the assigned team and with all support teams. Completes training and personal development in line with business requirements. Participates actively with local Total Productive Maintenance (TPM) teams in ways to improve quality, safety, process, material flow, and employee development. The candidate is expected to be able to handle the following tasks on shopfloor of a high production machine shop. The candidate should have a 2-3 years experience in machine shop and should have an engineering diploma in Mechanical / Automobile CNC programming - Fanuc and Siemens CNC machine operating Honing Machine operating Fixture setup change Tool change Basic GD&T knowledge Machine shop production Competencies: Collaborates - Building partnerships and working collaboratively with others to meet shared objectives. Communicates effectively - Developing and delivering multi-mode communications that convey a clear understanding of the unique needs of different audiences. Customer focus - Building strong customer relationships and delivering customer-centric solutions. Nimble learning - Actively learning through experimentation when tackling new problems, using both successes and failures as learning fodder. Self-development - Actively seeking new ways to grow and be challenged using both formal and informal development channels. Health and Safety Fundamentals - Champions and models proactive health and safety behaviors by identifying, reporting and participating in actions to improve health and safety in order to build an interdependent culture and contribute to an injury-free workplace. Controls Safety - Recognizes controls related hazards in a manufacturing environment (Electrical, Hydraulic, Pneumatic) to incorporate safe practices and procedures as part of the daily work plan to reduce injuries and create a safe machine environment. Manufacturing Knowledge - Demonstrates the knowledge of manufacturing by correctly implementing changes in current processes, equipment, and applications to meet the function's needs and contribute towards continuous improvement. Tool and Fixture Design - Selects work-piece-holding devices capable of effectively holding parts and products during a manufacturing process to secure their position to meet functional requirements. Values differences - Recognizing the value that different perspectives and cultures bring to an organization. Education, Licenses, Certifications: High school diploma or certificate of completion of secondary education or equivalent experience to the extent such experience meets applicable regulations. This position may require licensing for compliance with export controls or sanctions regulations. Experience: Minimal or no work experience required.

Mechanical Manpower Requirement Moulding, Machinery & Fabrication : Moulding What are Moulding Operation Detailing Setting Man Power allocation for all the three areas Process Components (Composition Knowledge) Study of the drawing Job Allocation Inspecting the Job Fabrication Design drawing to understand Job work Allocation Inspecting the Job Machinist: Lathe Operations Plunger, shackle cutting, Protector To operate Lathe machine and milling machine / operation cum maintenance Fitter: To know on Machinery, Assembly, Drilling, Tapping, Grind and Assembling. Mirror & Malt Finishing: Buffer machine De-flashing (cutting the sharp edges extra removal of the plastic components). Machinist: CNC Lathe Operations Machine operations & Maintenance routine. Programming as per designing Job setting & operation Overall maintenance (in depth not required) CNC Milling: Machine operations & Maintenance routine. Programming as per designing Job setting & operation Overall maintenance (in depth not required)

We are hiring Freshers for a leading Fan Manufacturing Company in the Production Department. Responsibilities: Assembly: Assemble fan components accurately and efficiently. Quality Control: Inspect products for defects and ensure adherence to quality standards. Machine Operation: Operate various machines and tools to facilitate the production process. Production Line Maintenance: Assist in maintaining production line equipment and tools. Adherence to Safety Guidelines: Follow safety protocols and wear appropriate safety gear.

Specialist in Sand Plant operations using Mixture machines and any other AC systems over the sand plant. Job Summary: We are seeking skilled and detail-oriented Heat Treatment Operators to join our manufacturing team. The successful candidates will be responsible for operating and monitoring heat treatment furnaces and equipment to alter the physical and mechanical properties of metal parts. The role requires adherence to safety standards, process specifications, and quality requirements. Key Responsibilities: Operate, monitor, and maintain heat treatment furnaces, ovens, and related equipment (e.g., quenching tanks, hardness testers). Follow detailed work instructions, process sheets, and safety protocols. Set up heat treatment parameters such as time, temperature, atmosphere, and quench cycle. Inspect materials before and after heat treatment to ensure they meet quality and specification standards. Record process data and maintain accurate logs and reports. Perform hardness and other mechanical property testing as required. Handle materials using hoists, cranes, or forklifts (if certified). Identify and report equipment malfunctions or deviations from process to the supervisor. Follow environmental, health, and safety (EHS) standards at all times. Collaborate with quality control and production teams for process improvements.

Responsibilities: Operate and monitor production machinery according to standard operating procedures. Ensure machines run efficiently and safely, performing routine checks and basic maintenance. Load and unload materials from machines as required. Monitor product quality during the production process and report any defects or issues. Adhere to all safety guidelines and regulations to maintain a safe working environment. Maintain a clean and organized workstation. Record production data and complete relevant documentation accurately. Collaborate with team members and supervisors to optimize production flow. Contact: Sathish: 8825502742 Note: Freshers can apply!

: We are looking for a dedicated Machine Operator to join our team in the Masterbatch Manufacturing unit, specifically handling polymer-based and pigment (paint) applications. The role involves operating machinery for mixing, extrusion, and pelletizing of masterbatches used in the plastics and coatings industry. Key Responsibilities: Operate and monitor masterbatch production machinery (e.g., extruders, mixers). Load raw materials (polymers, pigments, additives) as per batch instructions. Ensure product quality through routine visual and mechanical checks. Maintain clean and safe working conditions in line with company policies. Record daily production data and report deviations to the supervisor. Perform minor equipment maintenance and assist in troubleshooting issues. Follow SOPs and adhere to safety and quality standards. Support continuous improvement initiatives in production efficiency. Candidate Profile: ITI/Diploma in Mechanical, Electrical, Chemical, or relevant discipline Prior experience in plastic, polymer, or paint manufacturing is an advantage Willingness to work in shift operations Good understanding of production safety and machinery handling Strong attention to detail and discipline in following process instructions

We are looking for a dedicated Machine Operator to join our team in the Masterbatch Manufacturing unit, specifically handling polymer-based and pigment (paint) applications. The role involves operating machinery for mixing, extrusion, and pelletizing of masterbatches used in the plastics and coatings industry. Key Responsibilities: Operate and monitor masterbatch production machinery (e.g., extruders, mixers). Load raw materials (polymers, pigments, additives) as per batch instructions. Ensure product quality through routine visual and mechanical checks. Maintain clean and safe working conditions in line with company policies. Record daily production data and report deviations to the supervisor. Perform minor equipment maintenance and assist in troubleshooting issues. Follow SOPs and adhere to safety and quality standards. Support continuous improvement initiatives in production efficiency. Candidate Profile: ITI/Diploma in Mechanical, Electrical, Chemical, or relevant discipline Prior experience in plastic, polymer, or paint manufacturing is an advantage Willingness to work in shift operations Good understanding of production safety and machinery handling Strong attention to detail and discipline in following process instructions