29 Corrective Action Jobs

Role & responsibilities ESH Compliance Site Hygiene; compliance to organizational requirements Adhering to SOPs Ensuring correctly rated equipments. Ensure use of PPE by self and technicians Support in regular training on ESH and also ensure that safe practices are being following at Tower Site Ensure issue and usage of PTW for every activity being done at a site Customer Management Provide supports for outage escalation by OPCOs Site access supports as and when applicable for tenants Maintain healthy customer relationship Supervise Site upgrades as per specification and provide support for RFS activities Site Quality & process compliance Maintain excellent level of site quality (proper cable laying, correct temperature, correct settings, site in Auto, etc.) Identify Gap against specification and ensure timely corrections Periodic audit to ensure that civil/tower electrical and other Infrastructure are in best state. Ensure ZERO quality/operational process non compliance Compliance checking of quality of technicians, partners, spares including any ethical issues Energy Management Identifying high Diesel consumption sites and recommending their remedy action Minimizing EB faults Facilitating in converting non EB sites to EB sites DCEM Compliance

About Company Founded in 2011, ReNew, is one of the largest renewable energy companies globally, with a leadership position in India. Listed on Nasdaq under the ticker RNW, ReNew develops, builds, owns, and operates utility-scale wind energy projects, utility-scale solar energy projects, utility-scale firm power projects, and distributed solar energy projects. In addition to being a major independent power producer in India, ReNew is evolving to become an end-to-end decarbonization partner providing solutions in a just and inclusive manner in the areas of clean energy, green hydrogen, value-added energy offerings through digitalisation, storage, and carbon markets that increasingly are integral to addressing climate change. With a total capacity of more than 13.4 GW (including projects in pipeline), ReNew’s solar and wind energy projects are spread across 150+ sites, with a presence spanning 18 states in India, contributing to 1.9 % of India’s power capacity. Consequently, this has helped to avoid 0.5% of India’s total carbon emissions and 1.1% India’s total power sector emissions. In the over 10 years of its operation, ReNew has generated almost 1.3 lakh jobs, directly and indirectly. ReNew has achieved market leadership in the Indian renewable energy industry against the backdrop of the Government of India’s policies to promote growth of this sector. ReNew’s current group of stockholders contains several marquee investors including CPP Investments, Abu Dhabi Investment Authority, Goldman Sachs, GEF SACEF and JERA. Its mission is to play a pivotal role in meeting India’s growing energy needs in an efficient, sustainable, and socially responsible manner. ReNew stands committed to providing clean, safe, affordable, and sustainable energy for all and has been at the forefront of leading climate action in India. Sie Incharge -Solar AM Position Title – Site incharge – Solar Asset Management Experience- 6-12 years Qualification – Degree – Electrical Engineering Location- Bhalki, Karnataka 1. Should have sound knowledge on basic principles of Electrical Components. 2. Preparation of various documents as per ISO standards. 3. Experience in problem solving by using tools like Root Cause Analysis, Corrective Action & Preventive Action process. 4. Raising Non-Conformities, conducting RCA, CAPA and tracking closure of NCs for timely completion. 5. Supervising and verifying preventive maintenance as per schedule for solar power plant equipment’s e.g. Modules, Inverters. 6. Checking inverters and Strings for faults and related. Rectifications, checking and rectification of defective strings and modules. 7. Coordinating with OEMs for spares, AMC, warranty and service requests. 8. Analytics of various plant performance parameters with respect to Plant design (PV syst).

1) Industrial Safety 1.1. Proper Housekeeping of dept, Electrical systems 1.2. Follow safe working norms and practices as per set by organization 1.3. Reporting the unsafe conditions and taking corrective action. 1.4. Participating in safety meetings and working to close all safety observations / findings. 2) Maximizing the machine uptime. 2.1. Attend breakdowns in time. 2.2. Report/suggest to minimize the breakdown and take corrective action for repetitive/non repetitive breakdowns. 2.3. In-house repairing and overhauling of spares 2.4. Monitoring of Mechanical parameters and controls during shift operation. 3)Shut down Implementation 3.1. Perform the shut down jobs as per plan 3.2. Support to engineer for shut down activities 3.3. Issue / arrange Mechanical spares from store or outside require for shutdown job. 4) System Implementation/Improvement 4.1 1. Effectively follow SOP 2. Effectively follow QMS, OHSAS and EMS

About Company Founded in 2011, ReNew, is one of the largest renewable energy companies globally, with a leadership position in India. Listed on Nasdaq under the ticker RNW, ReNew develops, builds, owns, and operates utility-scale wind energy projects, utility-scale solar energy projects, utility-scale firm power projects, and distributed solar energy projects. In addition to being a major independent power producer in India, ReNew is evolving to become an end-to-end decarbonization partner providing solutions in a just and inclusive manner in the areas of clean energy, green hydrogen, value-added energy offerings through digitalisation, storage, and carbon markets that increasingly are integral to addressing climate change. With a total capacity of more than 13.4 GW (including projects in pipeline), ReNew’s solar and wind energy projects are spread across 150+ sites, with a presence spanning 18 states in India, contributing to 1.9 % of India’s power capacity. Consequently, this has helped to avoid 0.5% of India’s total carbon emissions and 1.1% India’s total power sector emissions. In the over 10 years of its operation, ReNew has generated almost 1.3 lakh jobs, directly and indirectly. ReNew has achieved market leadership in the Indian renewable energy industry against the backdrop of the Government of India’s policies to promote growth of this sector. ReNew’s current group of stockholders contains several marquee investors including CPP Investments, Abu Dhabi Investment Authority, Goldman Sachs, GEF SACEF and JERA. Its mission is to play a pivotal role in meeting India’s growing energy needs in an efficient, sustainable, and socially responsible manner. ReNew stands committed to providing clean, safe, affordable, and sustainable energy for all and has been at the forefront of leading climate action in India. Job Description eview and approval of contractor’s FQAPs. Assuring implementation of Quality Plan. Inspection and audit of TL construction work including substation as per FQAP and checklists. Follow up of Quality observations/NCs and timely closure with contractor. Quality audits and Quality checks during erection of Towers. Quality inspection during stringing activity and experience in final checking of towers. Monitoring and planning the Site quality inspections through TPAs. Monitor and review all the Civil activities at site like material incoming, in-process activities, testing and commissioning. Inspection of Transmission line tower parts line templates angles and Bolts etc. Monitoring overall project quality control and quality assurance. Inspection of incoming materials (IMIR) Knowledge of relevant IS codes related to civil works. Preparation of NCs if any, find out root cause, proposed corrective action and suggest preventive action. Review of Drawings, SOP, FQP, Check list, etc. Implementing the QA/QC management system at the site. Provide daily & weekly feedback to project, and quality manager regarding progress reports, inspection & test status, quality issues & NC status. Preparing IMIR, Cube register, test reports for materials. Documentation and testing as per QAP & ITP Directly coordinating with the contractors regarding project activities such as construction, maintenance, support, documentation, and testing activities to ensure compliance with specifications, codes, and client requirements. Providing on job quality training. Reporting and documentation as per Indian Standards Auditing and documentation. Skills to do commissioning and testing. 3rd party inspector and contractor- management. Knowledge of Reinforced Cement Concrete, concrete cube test validation, NDT & core test. Knowledge of relevant IS codes of civil and structure works. Knowledge of raw material testing for civil construction works at site and lab.

Synnat Pharma Pvt Ltd seeks a proactive Maintenance Executive to ensure equipment reliability and minimize downtime at our Visakhapatnam API manufacturing facility. You will execute preventive maintenance, troubleshoot malfunctions, manage spare parts, and collaborate on corrective actions. Responsibilities include overseeing civil/fabrication activities, adhering to SOPs, and maintaining documentation. Strong technical problem-solving skills and a commitment to quality/safety are essential. Job Details: Industry: API Manufacturing Department: Maintenance Role: Maintenance Executive Location: Visakhapatnam Compensation: 2-4 LPA Experience: 1-3 years Qualification: Bachelor's Degree in Mechanical Engineering, Electrical Engineering, or a related field Responsibilities: Develop and implement preventive maintenance schedules (PPM) for process and critical equipment, adhering to industry best practices and Synnat Pharma's SOPs. Conduct equipment inspections and performance monitoring to proactively identify and address potential issues. Analyze maintenance data to identify trends, predict equipment failures, and optimize PPM schedules. Respond to equipment breakdowns, troubleshoot issues, and perform necessary repairs on mechanical, electrical, and instrumentation systems. Manage spare parts inventory, ensuring critical items are readily available for timely repairs. Oversee basic civil and fabrication activities related to facility and equipment maintenance. Maintain accurate maintenance documentation, including manuals, SOPs, schedules, and repair records. Ensure all maintenance activities comply with regulatory requirements (FDA, cGMP). Implement corrective actions to prevent recurrence of equipment failures and improve reliability. Collaborate with production to schedule maintenance, minimizing disruption and maximizing uptime. General Expectations and Past Experiences: 1-3 years' Maintenance Executive experience in API Manufacturing (Preventive Maintenance, Troubleshooting). Hands-on experience: Civil/Fabrication, Mechanical/Electrical Systems Repair (Pharmaceutical). Solid understanding of API Manufacturing, Equipment Validation, and SOPs. Proven ability to develop Maintenance Schedules, reduce Downtime, and execute Corrective Actions. Familiarity with Procurement, Spare Parts, and Maintenance Documentation. Excellent Teamwork & Communication skills. Proficient in Maintenance Risk Assessment and Best Practices.

- Inspect raw materials and products for dimensional, mechanical, & visual standards - Perform tensile, hardness, & surface finish tests - Use calipers, micrometers, & testers - Identify & correct quality issues - Work with teams to improve processes Required Candidate profile - Diploma/degree in Engg or related field - Min. 1 yr QC experience in fastener/metal manufacturing industry - Proficient in Vernier Caliper & Micrometer - Team player with attention to detail

- Inspect materials & products to spec - Monitor processes & equipment - Analyze quality data - Maintain inspection records - Knowledge of PPAP, MSA, SPC, CAPA, PFMEA - Investigate quality issues & implement CAPA - Collaborate for improvements Required Candidate profile - Bachelor’s in engineering, quality, or related - Quality experience in fastener/metal manufacturing - Knowledge of ISO 9001, SPC, Six Sigma - Strong leadership, teamwork, and software skills

Role Overview: The IBCOO Group is seeking a Retainer to provide operational support for the Ratings line of Business within the In-Business Control Group. This role focuses on access control activities, including conducting periodic and non-periodic access reviews, managing access control certifications and overseeing governance for transfers and leavers. Key Responsibilities: Functional Responsibilities: Execute access control, ensuring timely reviews of user access and effective resolution of discrepancies. Analyze system data to identify trends and share insights with stakeholders, developing targeted action plans based on findings. Conduct independent research to enhance data understanding and inform decision-making. Apply troubleshooting skills, including Root Cause Analysis, to identify issues and implement corrective actions. Adhere to strict deadlines, maintaining accurate records in compliance with internal procedures. Respond promptly to access-related inquiries via email or calls. Balance effective operational execution with a commitment to continuous improvement. - Support process stakeholders (e. g., requestors, approvers, IT application teams, compliance) through training, expertise, and clear communication. Client and Stakeholder Management: Take ownership of all deliverables, ensuring timely and high-quality execution of tasks. Build and maintain strong relationships with client counterparts. Communicate effectively with clients regarding task guidance, progress updates, and any challenges encountered during execution. Candidate Profile: Good communication (written and oral), interpersonal, and organizational skills. Basic understanding of data analysis principles. Proficiency in Basic Excel is required; familiarity with Power BI and Python is preferred but not mandatory. Professional demeanor with a collaborative mindset, capable of interfacing effectively with internal and external stakeholders. Diligent, intellectually curious self-starter with a strong work ethic and a drive for success. Essential Qualifications: Bachelor’s degree with 1-2 years of experience in operational processes, preferably in Risk & Control processes.

About Company Job Description Budgeting: Develop and manage the company's annual budgeting process, collaborating with department heads to ensure alignment with organizational goals and financial targets. Forecasting: Lead the forecasting process, analysing historical data, market trends, and business drivers to provide accurate forecasts for revenue, expenses, and other financial metrics. Variance Analysis: Conduct regular variance analysis to identify discrepancies between actual financial performance and budget/forecast and provide recommendations for corrective actions. MIS Reporting: Preparation of MIS reports, providing timely and insightful financial analysis to the leadership to support strategic decision-making. KPIs Tracking and Reporting: Define key performance indicators (KPIs) relevant to financial performance and track them regularly. Commercial and Business Finance Activities: Manage pricing strategies ensuring profitability while remaining competitive in the market. Oversee revenue recognition. Experience in handling the dealer/distributors. Detailed review of all commercial contracts. Manufacturing Plant : Working closely with Plant finance leads on month end closures, MIS , Costing and forecasting activities Financial Modelling: Develop and maintain financial models to support strategic planning, scenario/ sensitivity analysis and investment decisions Product costing Cross-functional Collaboration: Collaborate with cross-functional teams including Finance, Sales, Operations and Marketing to gather insights, drive process improvements and support business and automation initiatives.

Key responsibilities Revenue Objectives: • To achieve the Revenue targets in close coordination with the Pre-Sales, BU sales and Post Sales Team both acquisition and retention of revenue through the Sector and BU Sales • Cultivate and maintain strong relationships with key clients in the sector / sub-sector. Understand their business objectives, challenges, and pain points. Provide customized logistics solutions that meet their specific requirements and add value to their operations. Ensure high levels of client satisfaction and retention. • Prepare persuasive and comprehensive proposals in response to client requirements. Lead contract negotiations to ensure favorable terms and conditions for the logistics service provider. Collaborate with legal and finance teams to finalize agreements. Customer Delight: • Cross-functional Collaboration: -Work closely with internal teams, including operations, finance, marketing, and customer service, to ensure seamless execution of business development strategies. Collaborate with these teams to deliver exceptional customer experiences and exceed client expectations. Lead MBRs and QBRs with customers • To drive the team and ensure CRM Compliance and effectiveness. • Helping marketing team to design the Customer Survey and take corrective actions on the same. • Develop the long-term account plan (1 year to 3 year) for assigned clients within the sector. • Maintain a sector scorecard & drive y-o-y client improvement on all parameters. • Develop a high-performance service culture. • QUALIFICATIONS & COMPETENCIES Skills and Competencies • Proven supply chain track record in logistics industry with 10+ years of experience in India. • Prefer sales and key account experience including experience in developing and growing new key accounts of Chemical sector. • Relevant logistics expertise within identified sub sectors – Chemical in developing and executing strategic and tactical plans, in a large and dynamic sales environment. • Able to design and implement solutions pertaining to specific industry solving customer problems. • Experience in supply chain across entire logistics value chain including Express, FTL transportation, warehousing & Value-added services. Stakeholder Internal: All Business and Functional Verticals, External: Customers, Major competitors • Educational Qualification (min) Post-Graduation in Marketing / Sales or Post-Graduation in Logistics/Supply Chain • Preferred Certifications if any Relevant logistics expertise within identified sectors – Chemical • Range/ Min no of years - of overall Experience required 10+ years • Min no of years of Industry specific experience required, if any & the industry type 7-10 years of experience in logistics industry

Key responsibilities Revenue Objectives: • To achieve the Revenue targets in close coordination with the Pre-Sales, BU sales and Post Sales Team both acquisition and retention of revenue through the Sector and BU Sales • Cultivate and maintain strong relationships with key clients in the sector / sub-sector. Understand their business objectives, challenges, and pain points. Provide customized logistics solutions that meet their specific requirements and add value to their operations. Ensure high levels of client satisfaction and retention. • Prepare persuasive and comprehensive proposals in response to client requirements. Lead contract negotiations to ensure favorable terms and conditions for the logistics service provider. Collaborate with legal and finance teams to finalize agreements. Customer Delight: • Cross-functional Collaboration: -Work closely with internal teams, including operations, finance, marketing, and customer service, to ensure seamless execution of business development strategies. Collaborate with these teams to deliver exceptional customer experiences and exceed client expectations. Lead MBRs and QBRs with customers • To drive the team and ensure CRM Compliance and effectiveness. • Helping marketing team to design the Customer Survey and take corrective actions on the same. • Develop the long-term account plan (1 year to 3 year) for assigned clients within the sector. • Maintain a sector scorecard & drive y-o-y client improvement on all parameters. • Develop a high-performance service culture. • QUALIFICATIONS & COMPETENCIES Skills and Competencies • Proven supply chain track record in logistics industry with 10+ years of experience in India. • Prefer sales and key account experience including experience in developing and growing new key accounts of Chemical sector. • Relevant logistics expertise within identified sub sectors – Chemical in developing and executing strategic and tactical plans, in a large and dynamic sales environment. • Able to design and implement solutions pertaining to specific industry solving customer problems. • Experience in supply chain across entire logistics value chain including Express, FTL transportation, warehousing & Value-added services. Stakeholder Internal: All Business and Functional Verticals, External: Customers, Major competitors • Educational Qualification (min) Post-Graduation in Marketing / Sales or Post-Graduation in Logistics/Supply Chain • Preferred Certifications if any Relevant logistics expertise within identified sectors – Chemical • Range/ Min no of years - of overall Experience required 10+ years • Min no of years of Industry specific experience required, if any & the industry type 7-10 years of experience in logistics industry

About Company Founded in 2011, ReNew, is one of the largest renewable energy companies globally, with a leadership position in India. Listed on Nasdaq under the ticker RNW, ReNew develops, builds, owns, and operates utility-scale wind energy projects, utility-scale solar energy projects, utility-scale firm power projects, and distributed solar energy projects. In addition to being a major independent power producer in India, ReNew is evolving to become an end-to-end decarbonization partner providing solutions in a just and inclusive manner in the areas of clean energy, green hydrogen, value-added energy offerings through digitalisation, storage, and carbon markets that increasingly are integral to addressing climate change. With a total capacity of more than 13.4 GW (including projects in pipeline), ReNew’s solar and wind energy projects are spread across 150+ sites, with a presence spanning 18 states in India, contributing to 1.9 % of India’s power capacity. Consequently, this has helped to avoid 0.5% of India’s total carbon emissions and 1.1% India’s total power sector emissions. In the over 10 years of its operation, ReNew has generated almost 1.3 lakh jobs, directly and indirectly. ReNew has achieved market leadership in the Indian renewable energy industry against the backdrop of the Government of India’s policies to promote growth of this sector. ReNew’s current group of stockholders contains several marquee investors including CPP Investments, Abu Dhabi Investment Authority, Goldman Sachs, GEF SACEF and JERA. Its mission is to play a pivotal role in meeting India’s growing energy needs in an efficient, sustainable, and socially responsible manner. ReNew stands committed to providing clean, safe, affordable, and sustainable energy for all and has been at the forefront of leading climate action in India. Job Description Position Title - Senior Engineer- Solar Asset Management Experience- 4-7 years Qualification- Electrical Engineering Location- Honnali, Karnataka Roles & Responsibilities - Should have sound knowledge on basic principles of Electrical Components. Preparation of various documents as per ISO standards. Experience in problem solving by using tools like Root Cause Analysis, Corrective Action & Preventive Action process. Raising Non-Conformities, conducting RCA, CAPA and tracking closure of NCs for timely completion. Supervising and verifying preventive maintenance as per schedule for solar power plant equipment’s e.g. Modules, Inverters. Checking inverters and Strings for faults and related. Rectifications, checking and rectification of defective strings and modules. Supervising any breakdown maintenance. Coordinating with OEMs for spares, AMC, warranty and service requests. Contract Management. Upkeep of SCADA and WMS. Monitoring of SCADA and WMS parameters and point out faults to maintenance technicians. Verification of module cleaning as per schedule. AMR/JMR Ensuring Project Handover and takeover as per scope, protocols and procedures. Maintaining list of plant related issues and taking up with engineering, contracts, accounts, environment etc.

Process & quality monitoring for respective technology plants Identify and analyse deviations Perform root cause analysis Propose corrective action and track the status of process improvement Identify opportunities for profit improvement Identify opportunities for product quality enhancement Process design calculations for the improvement schemes Develop process design package using appropriate tools Participate in commercial plant trials Understand and evaluate basic engineering design documents Participate in plant performance audits as per set guidelines Participate in Critical PHAs and turnaround activities of the related plants Validate MoCs to ensure specified standards and codes are followed in calculations Support preparation of stage gate-2 and 3 document for Capital projects Participate in HAZOP of new projects Validate equipment data sheets prepared by engineering contractor Contribute to derive value from technology network

customer quality, complaints, audits, customer satisfaction, manuals, 8D, CAPA, PDI, mis, IATF, Expertise in 7 QC tools, Statistical Process Control, Problem Solving & Root Cause Analysis, MiniTAB, fuel, engine, valve, powertrains, filters,

We are seeking a qualified and experienced person to manage and support activities related to ISO/IEC 17065 accreditation within our certification body. The ideal candidate will play a key role in maintaining, developing new products/schemes, and improving our accreditation status, ensuring full compliance with accreditation body requirements and relevant standards. This position is integral to sustaining the credibility, quality, and integrity of our certification services. Roles and Responsibilities Coordinate, maintain, and oversee activities required for compliance with ISO/IEC 17065 or ISO/IEC 17021-1 . Liaise with accreditation bodies (e.g., NABCB, ANAB) regarding initial, surveillance, reassessment, and expansion audits. Prepare documentation, procedures, and records in line with accreditation and internal quality management requirements. Lead internal audits, management reviews, and nonconformity corrective action processes. Assist in developing, reviewing, and updating certification schemes to meet applicable standards and regulatory requirements. Serve as a key point of contact during external audits and ensure timely closure of any non-conformities raised. Monitor and track changes in applicable standards, accreditation requirements, and regulatory updates. Support training and awareness activities for internal teams regarding accreditation and standard updates. Participate in risk assessment, impartiality review, and continual improvement initiatives. Maintain up-to-date knowledge and understanding of ISO/IEC 17065, ISO/IEC 17011, and related conformity assessment standards.

JOB PURPOSE Overseeing the process of GMC Investigations to Identify Fraud cases / Minimize liability of Company through extensive "in time" investigation and fact finding of all referred and triggered claims Ensure faster in time investigation of cases with minimum expenses to optimize claims cost saving/ recovery revenues. Developing risk management controls, contingency plans and Communicating recommendations to Under writer Developing Analytical Risk for prediction Managing and assisting team members and Responsible for Pan India PRINCIPAL ACCOUNTABILITIES Investigations & Quality Improvement Quality checks of the Investigations which is assigned through external and internal Vendors Review the evidence/documents collected to analyze the overall fact pattern of claim and provide recommendations Ensure LOB wise target achievement as per AOP Assisting on FIR filing on fraud identified cases Reviewing the forensic experts reports and giving relevant inputs to conclude the facts of the case. Conduct assessments to define and analyze possible risks and initiative projects as a tool of prevention In-depth Investigation of suspected fraud / triggered claims / Critical & High value claims. Responsible to Complete the Case within Stipulated Turn-around Time (TAT) Trigger Management Developing new trigger after analyzing the patterns of losses Recommend, implement and monitor preventative and corrective actions to ensure that quality assurance standards are achieved Evaluate Trigger efficiency and recommend the prioritization Monitor LR and Create new triggers based on the Outliers Risk & People Management Vendor Management – Training the external investigators, Control measures, Quality check for the investigation reports. Design processes to eliminate or mitigate potential risks: Fraud nexus, Location wise severity. Liaison closely with internal (claims, legal team or any team associated and external stakeholders (Lawyers, Police, Hospitals, Govt Missionaries, etc.) Manage and prioritize high case load effectively and efficiently to achieve results of Timeline and Success Training, evaluating, supporting the investigators, towards the fulfilment of the required actions Develop contingency plans to manage crises like Disaster claims, Pandemic situations etc. Enhance existing procedures in investigation by deploying new tools Prepare reports, presentations, recommendations and Performance review to Management Monthly Stat report and Sharing with Concern Channels of GMC Conducting meeting with GMC HR for identified fraud and taking actions Roles and Responsibilities 3

1) Planning and Analysis. 1.1 Maintenance Planning - Executing the timely and effective Preventive maintenance schedule 2) Utilities continual improvement 2.1 Break-down analysis - Preparing and maintaining breakdown analysis report for all major and minor breakdown and corrective action suggestion and implementation. 2.2 Manpower Utilization - Providing On job trainings, Skills enhancement and Motivations to workmen for proper and optimum utilization of manpower 3) Department Development 3.1 Adherence to Management programme with an aim of ZERO N.C. and Safety and Statutory compliance with ZERO HARM 4) Record and Documentation 4.1 Maintaining regular, proper documentations and maintenance of updated monitoring records.

Oversee organizational and programmatic elements of company's quality control, quality assurance and compliance functions. i. Plan and organize personnel and workflow utilization in order to implement the timely submission, approval, validation, testing and release of products and processes in accordance with the FAOP and internal quality system policies, procedures and external regulations and standards that govern the products manufactured, tested, stored, promoted and/or distributed by or for the company. ii. Ensure compliance with applicable internal and external regulations, standards, policies and procedures related to the quality and regulatory status and performance of company operations, processes and products. iii. Develop, implement and monitor progress against the company's strategic quality plan, related quality objectives, projects and goals for quality department. iv. Provide update and recommendation to the company senior management staff with regard to the status of such objectives, projects and goals as relate to cross-functional business objectives (MRM, MIS). v. Maintain contact with critical vendors, professional organizations, consultants and peers in order to be abreast with current with the prevailing industry standards. vi. Represent as the companys primary liaison regarding affairs involving interaction with external regulatory and standards bodies (ISO assessors) when necessary to adjudicate issues with product submissions, product performance, compliance concerns and prevailing/impending regulatory requirements. vii. Ensure internal audit program is adequately defined and followed (inclusive of comprehensive CAPA development, approval and execution) in a manner that is both timely and global in nature. viii. Ensure efficient and effective validation programming and execution for manufacturing processes, test methods, facilities/equipment/utilities by employment of a comprehensive validation master plan. ix. Ensure product is released in a timely manner in compliance with company procedures and regulatory requirements. x. Ensure that all quality related laboratories (both within company as well as those that perform contract testing for company) operate in an efficient and safe manner in accordance with OHSAS requirements. xi. Provide organizational and subject matter expertise to support in promotion of company's products xii. Counsel respective SQA for development in manufacturing and inspection processes, techniques, procedures or facilities/equipment in regards to ensuring compliance with applicable quality and regulatory criteria at the supplier front. xiii. Recommend actions or policies that result in cost reduction, efficiencies or increased profitability to the company. xiv. Ensure that critical or strategic priorities at the site and corporate levels are afforded resources and sufficient quality oversight to ensure timely resolution and complete without undue concern for delay non-conformance or non-compliance. xv. Define and approve departmental budget and capital expenditures.

Develop, implement, and maintain the organization's MIS to ensure accurate and real-time reporting of key business metrics. Oversee the preparation and distribution of daily, weekly, and monthly reports to various departments and senior management. Ensure data accuracy, integrity, and consistency across all reporting platforms. Design and maintain dashboards for business performance monitoring. Analyze data trends and provide insights to management for informed decision-making. Establish and maintain cost accounting systems and procedures for accurate tracking of material, labor, and overhead costs. Review and update cost standards, analyzing variances and taking corrective actions when necessary. Collaborate with other departments to monitor and control project costs, ensuring alignment with budget and financial goals. Perform cost analysis and prepare cost reports to monitor financial performance and support pricing decisions. Conduct regular audits to ensure compliance with costing policies and industry standards. Provide regular cost analysis reports, highlighting variances between actual and budgeted figures, and recommend corrective actions. Support financial forecasting and budgeting processes by providing relevant data and insights. Assist in month-end and year-end closing processes by ensuring accurate costing and reporting entries. Review profitability analysis reports and identify areas for cost optimization.

SUMMARY Job Title: Regional Sales Manager Role Description : The Regional Sales Manager will be responsible for developing and executing regional sales strategies to achieve OEM product sales targets. This role involves analyzing market trends, dealer performance, and the competitive landscape to inform strategy. Responsibilities: Dealer Management: Identify, recruit, and onboard new OEM dealers within the assigned area. Establish and maintain strong relationships with existing dealers, providing support and guidance. Monitor dealer performance, provide feedback, and implement corrective actions as needed. Sales and Revenue Growth: Drive sales growth by developing and executing action plans to meet or exceed sales targets. Conduct regular sales meetings and reviews with dealers to discuss performance, opportunities, and challenges. Ensure dealers adhere to OEM standards and policies. Market and Product Development: Collaborate with dealers to identify market opportunities and customer needs. Assist in the development and promotion of new products or services to enhance market presence. Provide market feedback to the OEM product management team to inform product improvements. Training and Support: Organize and conduct training sessions for dealers on product knowledge, sales techniques, and best practices. Offer ongoing support and resources to help dealers achieve their sales goals and improve performance. Reporting and Analysis: Prepare and present regular sales reports and performance analysis to senior management. Track and analyze sales metrics, dealer performance, and market conditions to identify areas for improvement. Customer Relations: Address dealer and customer inquiries and resolve any issues related to products or services. Ensure high levels of customer satisfaction by maintaining effective communication and addressing concerns promptly. Compliance and Administration: Ensure compliance with OEM policies, procedures, and legal requirements. Manage administrative tasks related to sales, including reporting, documentation, and record-keeping. Requirements 4-8 years of sales experience Proficiency in MS Office and CRM tools Benefits CTC : Upto 8LPA

Sr. Exe Asst Mgr. Quality: Position: FLO Quality Control Location: Tirupati & other South locations. About CMR CMR Group is India's largest producer of Aluminium and zinc die-castingalloys. With 13 state-of-the-art manufacturing plants across the country, CMRhas become the preferred supplier for many of Indias largest automotiveindustry leaders. Since its inception in 2006, CMR has consistently outpacedcompetition by focusing on delivering superior value to its stakeholders. Thisvalue is driven by a strong commitment to technical advancements, qualityenhancement, sustainability, and people-centric practices. We believe inan " Employee First " philosophy, ensuring that ourpeople are at the core of our success. Our dedication to fostering an enrichingwork environment is reflected in our recognition as the 'Most PreferredPlace for Women to Work' and as one of the Top 25 Mid-SizedIndias Best Workplaces in Manufacturing for 2025 by GreatPlace to Work. As CMR continues to chart its growth trajectory, we remain committed toinnovation and excellence. We are always looking for enthusiastic and dynamicindividuals to join our team and contribute to our continued success. Position : FLO-Quality Control Job Band : A Designation : Sr.Executive/ Assistant Manager No. of Posts : 1 (One) Department : Qualitycontrol Reporting to : AreaHead Quality Qualifications : Essential Professional degree / BE/ B.Tech in Mechanical / Metallurgy (FullTime) from reputed institute Desirable : Degree/Diploma in Operation or certification in quality system. Experience: Essential 4+ years ofexperience in Quality Function in Metal Industry. working Exposureof Quality techniques Visual, Spectrometry, Chemicalcompositions is mandatory. Desirable : Experience inQuality control activities in the manufacturing sector. Job Profile: Raw Material Inspection: Conductthorough inspections of incoming raw materials such as aluminum scrap, alloys, and other materials to ensure compliance with quality standards. Document and report any deviationsor non-conformities and work with the procurement team to resolve issues. Process Control : Monitorand control the production processes involved in aluminum recycling, ensuringthat they are executed according to established procedures and qualitystandards. Collaborate with the production team to implement processimprovements and optimize quality. Finished Product Inspection: Performcomprehensive inspections on finished aluminum products to verify quality andconformity to customer specifications. Maintain accurate records ofinspection results and generate reports as required. Quality Testing: Conductvarious quality tests on aluminum products, including but not limited tohardness, tensile strength, and chemical composition analysis. Operatetesting equipment and ensure proper calibration and maintenance. Documentation and Reporting:-- Maintainmeticulous records of quality control activities, test results, and anyquality-related incident. Prepare and present regular reportson quality performance to management. Quality Assurance: Implement and enforce qualityassurance practices and standards across the organization. Participate in root cause analysisand corrective action processes to address quality issues Safety and Compliance: - Adhereto all safety protocols and ensure a safe working environment for yourself andcolleagues. Ensure compliance with all relevant industry regulationsand standards. Functional Skills: Qualitymanagement systems Statistics Riskassessment and analysis Projectmanagement Behavioral Competencies: Technicalproblem solving Vendormanagement Knowledgeof mechanical equipment Coordinationskills Executionexcellence General: Age-22- 30 years. CTC -3.5 to 6.5 There is no constraint for the right candidate. Candidateshould not be frequent job changer. NoticePeriod- Joining period Max 30 Days. We can buy notice period, if require.

About the Job: We are looking for a passionate and dynamic experienced Finance Professional to join our team at Manipal Hospitals! About Us: As a pioneer in Healthcare, Manipal Hospitals is among the top healthcare providers in India serving over 5 million patients annually. Today we stand as an integrated network with a pan-India footprint of 37 hospitals across 19 cities with 10,500 beds, and a talented pool of over 5,600 doctors and an employee strength of over 20,000. Role: Internal Audit Location: Bangalore What You’ll Do: Assess and prepare periodic / specific audit reports /MIS as desired by the management and communicate results of audit to stakeholders. Ensure RCM are tested with adequate samples to determine efficiency and effectiveness of internal systems and processes. Examine and evaluate financial and information systems, recommending controls to ensure system reliability and data integrity. Examine records and interview respective employees to ensure a proper system for recording of transactions and compliance with laws and regulations. Visit units & HO function as per Annual Audit plan, inspect books, records and systems, perform or supervise audit as planned. Analyze data to detect deficient controls, duplicated efforts, extravagance, fraud, or non-compliance with laws, regulations, and management policies. Use the audit findings for rectifications and improvements. Follow up to determine adequacy of corrective action and implementation of same Meeting with Senior Management and Audit committee to decide on the focus point of audit, to study previous audit reports and to prepare annual audit budget / plan based on such studies. Review the means of safeguarding assets and verify the existence of such assets Review asset utilization and audit results and recommend changes in operations and financial activities. What We Are Looking For: Chartered Accountant 10-12 years of experience What We Offer: Competitive salary and benefits package Opportunities for professional development and career growth A collaborative and inclusive work environment Roles and Responsibilities Support the Internal Audit Head to: Examine and evaluate financial and information systems, recommending controls to ensure system reliability and data integrity. Examine records and interview respective employees to ensure a proper system for recording of transactions and compliance with laws and regulations. Visit units & HO function as per Annual Audit plan, inspect books, records and systems, perform or supervise audit as planned. Analyze data to detect deficient controls, duplicated efforts, extravagance, fraud, or non-compliance with laws, regulations, and management policies. Assess and prepare periodic / specific audit reports /MIS as desired by the management and communicate results of audit to stakeholders. Meeting with to Senior Management and Audit committee to decide on the focus point of audit, to study previous audit reports and to prepare annual audit budget / plan based on such studies. Use the audit findings for rectifications and improvements. Follow up to determine adequacy of corrective action and implementation of same Review the means of safeguarding assets and verify the existence of such assets Review asset utilization and audit results and recommend changes in operations and financial activities. Ensure RCM are tested with adequate samples to determine efficiency and effectiveness of internal systems and processes. Support and test the key control automation process Provide guidance and direction to relevant team members as required. Ensure good corporate governance and ethics in the organization.

Facilitating the manufacturing industry (related to Coating like 3LPE, FBE, CWC), primarily focused on enhancing and maintaining product quality and process efficiency. This role encompasses the conduction of QST audits at the plant level to identify opportunities for process improvement, ensuring non-conformances are reviewed and resolved within specified time limits. Responsible for generating daily, weekly, and monthly QST observations, Non-Conformance Reports (NCRs), and other findings. Conducting QST audits in plant level for process improvements Daily, weekly and monthly QST observations, NCR and other findings reports Review of Implementation and effectiveness of all Observations and Non-conformance Ensure & monitor for QMS, internal / external audit & NC compliance (No Major NCs) Confirmation of QMS compliance of Plant prior to External Audits from customer Conducting QST audits in plant level for process, products to compliance checking as per inspection and test plan, customer specifications for improvements Preparing daily QST reports, QST findings and other reports Review of Implementation and effectiveness of all Observations and Non-conformance raised by QST and closed by plant Conducting internal audit as per internal audit plan Checking compliance for QMS Review the requirements from customers (I.e PO, Client specification, Data Sheet and as per standards like API Q1,ISO 9001,API 5L and relevant to process Preparing all the report and review internal , system non conformity reports Coordinate with plant / function to close the observation and nonconformity Verification of effectiveness of corrective actions Support to QMS department for internal audit as well as external audits Co-ordinate & Follow up with all functions and departments for the QMS requirements. NACE Level 1 or 2,ISO 17025 (NABL) Lead / Internal Auditor,ISO 9001 Lead / Internal Auditor

Develop and execute a risk-based internal audit plan, enhance controls, drive automation in controllership, manage stakeholders, and align audit priorities with business goals through strong operational and strategic understanding. Required Candidate profile Chartered Accountant with 10–15 years of internal audit experience in the Process or Chemical industry or with a Big 6 audit firms.

Roles & Responsibilities : Responsible for achieving target sales volumes and Market Share Monitoring & reviewing sales performance of territories Conduct team meetings, channel development Overseeing sales promotional activities Track the inventory at distributor locations, track the stock returns Ensure availability of quality enablers at dealership. Expands customer base by identifying new customer segment & opportunities. Ensure timely & quality forecast from dealerships. Regular performance analysis of dealerships and proposes corrective action. Communicate dealerships on company policies and initiatives, implement and adherence of the same. Coordinate with financers & insurance companies for market development activities. Meeting customers to take feedback, understand expectations, resolve complaints. Timely market feedback to RSM & HO on competition activities, government regulations and related business aspect.