36 Validation Testing Jobs

Role & responsibilities 1. Good Experience in overall quality assurance, Must be experienced in facing regulatory audits (ANVISA, USFDA, MHRA,EU,Ukraine,Russia) 2. Responsible for handling of change control, Execution, preparation, Attachments, Log completion. 3. Responsible for Preparation of Process Validation Protocol & Report execution planner of process validation Sampling, critical parameters attributes, establish sample matrix, Intimation TI sheet, collection of all RAW data, attachments of 3 consecutives batches, attachments of analytical reports. 4. Responsible for handling Deviation, Execution, preparation, Approval, Closure, managing logs. 5. Responsible for Market complaint, Investigation, find out root cause, Conclusion, preparing backup data, attachments, Closure, manage logs. 6. Responsible for Self-inspection report & conduct Self inspection, rotate circular, selection of auditors, preparation of checklist, Execution of self-inspection, prepare CAPA for Noncompliance, Review and verification of all Data. 7. Execution of Cleaning validation and review of Method Validation protocol. 8. Responsible for CAPA, preparation of CAPA, collecting data, investigation, closure of CAPA, manage logs. Preferred candidate profile 1. Candidate should preferrably from Pharma Industry 2. Strong in regulatory compliances

Role & responsibilities Primary Responsibilities: 1. Performance of Method Development, Validation and Study Sample Analysis using LC-MS/MS systems. 2. Operation, Calibrations and Maintenance of Pipettes, pH meter, Balance, HPLC, Dispensers and Turbo-Evaporators, Centrifuge, Solid-Phase Extraction, and other Bioanalytical equipment. 3.Preparation of Method Validation Protocols, Method Validation Reports, Standard Test Procedures, SOPs, and Bioanalytical Reports. 4. Responsible for documentation as per in house SOPs and practices in raw data forms and logbooks. 5. Compilation of Calibration Data, Bio analytical raw data forms and logbooks. 6. Maintenance of Workplace. 7. Reporting to supervisor/HOD about progress of the jobs assigned. 8. Follow in-house procedures for safe disposal of waste generated in the lab. 9. Recording the temperature and humidity in the lab. 10. To ensure all applicable SOPs are complied with for the work being done. 11. To ensure that raw data and other documents are recorded appropriately reflecting the actual sequence of events. 12. To ensure that all the results are being transcribed, reported, and calculated appropriately matching with chromatographic data and raw data. 13. Maintain cleanliness and safety aspects in the Lab. 14. To ensure proper labeling for all the reagents, solutions, and chemicals in the laboratory. 15. Ensure the archival of all completed study and validated documents. Secondary Responsibilities: 1. Maintenance of Columns and Reference Standards in the lab. 2. Any other responsibilities assigned by HOD. Preferred candidate profile Qualification : M.Pharmacy / MSc Chemistry Experience : 1-6 Yrs in Clinical Research - Bioanalytical

Role & responsibilities New Product Development. Integrate automation system with exisiting manufacturing equipments and infrastructure. Conduct testing and validation of automation systems to ensure functionality and performance meet requirements. Provide technical support for troubleshooting mechanical issues and implementing corrective actions. Optimize automation process to improve efficiency, reduse waste and minimize downtime. Develop and maintain documentation related to NPD, Including specification, drawings and operating procedures. Collaborate with vendors and suppliers to select and procure FTG, SPM Components & equipments. Management of facilities like equipments & spares, coordinate with maintenance team to improve the quality/productivity. Provide cost saving in direct and indirect material, coordinate with R&D for implementation of cost saving ideas - ECR to EPI, wastage elimination reduction. To ensure safety of operators, workplace, facilities, fatigue reduction/elimination, improvements / SIAT to done. Improve quality by resolving chronic/major issues by process/design change, regular process audit. Preferred candidate profile DME/B.E/B.Tech - Mechanical with 5+ years of experience in manufacturing enginnering. System Knowledge: QMS, OSHA, EMS, EnMS Data Management, Process Complience of ISO standards.

Job Title: Validation Tester. Job Type: Full-Time. Location: Remote. Job Summary:. Join our customer's team as a Validation Tester and play a critical role in ensuring software quality and regulatory compliance. As a key member of our QA process, you will collaborate closely with developers and stakeholders, leveraging your expertise in validation testing and regulatory standards to drive product excellence.. Key Responsibilities:. Design and implement comprehensive test cases and scenarios using risk-based testing methodologies, with special emphasis on core functionalities and regulatory requirements.. Execute Installation Qualification (IQ), Operational Qualification (OQ), and Performance Qualification (PQ) protocols to validate applications and ensure compliance with industry regulations.. Collaborate proactively with developers and stakeholders to understand, gather, and analyze application requirements for effective test coverage.. Apply a breadth of testing methodologies, including UI/UX Testing and SQL Testing, to validate all aspects of the software solution.. Log, track, and manage identified defects using test management tools, ensuring timely resolution and effective communication with relevant teams.. Prepare accurate and detailed validation documentation, including test scripts, validation protocols, and summary reports in accordance with regulatory standards.. Ensure all test cases and scenarios are traceable to system requirements and risk assessments, supporting robust and auditable validation processes.. Required Skills and Qualifications:. Proven experience in software testing and validation testing, particularly in regulated environments.. Strong knowledge of regulatory standards such as GxP and FDA 21 CFR Part 11.. Expertise in various testing methodologies, including UI/UX Testing, SQL Testing, and risk-based testing approaches.. Exceptional written and verbal communication skills, with a demonstrated ability to convey complex information clearly and collaborate across teams.. Experience with defect tracking and test management tools.. Meticulous attention to detail and a commitment to delivering high-quality validation deliverables.. Ability to work independently as well as collaboratively within a remote, cross-functional team.. Preferred Qualifications:. Experience preparing and reviewing validation documentation for regulated software products.. Certifications in software testing or regulatory compliance (e.g., ISTQB, ASQ, or equivalent).. Background in life sciences, healthcare, or other regulated industries.. Show more Show less

Role & responsibilities Review of Raw Material/Packaging Material /Stability/ Microbiology/ Cleaning Method Validation/ Validation/ Finished Product Analytical data, Certificate of Analysis & related documents. Review and approval of Exhibit Stability Protocols. Preparation and review of validation /pre-validation /commercial/annual addition batch/thermal excursion/additional study stability protocol. Approval of additional testing requests (if required). Review and approval of ln-Vitro/CU and dissolution sheets. Review and approval of Analytical Method Transfer documents. Participation in handling OOS, OOT, Investigation and deviations related to Quality Control. Review and approval of weekly and monthly software verification reports of Empower3. Periodic verification of application software on computer systems, associated with laboratory instruments with system administrator. Review of lab instruments calibration/preventive maintenance data. Review of Stability test results in NOVATEK software. Approval of Certificate of Analysis. Review and submission of analytical data to site regulatory affairs. To provide the response of regulatory affairs and Office of data reliability queries. Review and approval of change control request, specification, standard test procedure and SOP in Documentum Compliance Manager System. Preferred candidate profile Educational Qualification : B.Pharma/M.Pharma with 5 to 7 Yrs of working experience Mandatory USFDA Plant Exposure is required. Note - Sun Pharma does not seek payment of any kind from a prospective candidates for employment with Sun Pharma or authorise any agency or any individual to collect or charge any fees or charges for recruitment. Please be cautious while dealing with any recruitment agency or anyone asking you to pay money representing himself to be representing Sun Pharma.

Role & responsibilities 1. Responsible for ensuring that a functional program exists for performing and monitoring instruments/equipment calibration, validation and preventative maintenance and that all instruments/equipment utilized are adequately inspected, maintained, validated, calibrated as per cGLP and SOPs. 2. To monitor quality control operations in the laboratory and oversee record keeping practices, personnel, instruments, method validation and documentation, sample tracking and storage. 3. To record and track quality control within the laboratory to identify problems and areas requiring improvement. 4. To audit the conduct of projects, representative data as well as to review the final project reports. It is to assure that they accurately describe the methods, protocols and SOPs used and that the reported results accurately reflect the raw data. 5. To determine that no deviation from approved protocols or SOPs were made without proper authorization and documentation. The QAU should review the SOP deviations for compliance issues. 6. To participate in inspections by clients and accrediting or certifying agencies. 8. To perform general and safety audits of the facility, including Archives. 9. To prepare and sign a quality assurance unit statement, which will document the dates of audits and verifications of corrective actions. This statement is to be included with the final project report. 10. To prepare periodic summary report of QC & QA activities for director review. Spot check and review the laboratory records, notebooks, calculations, chain-of-custody forms, final report, sample handling, sample storage, and all others matters related to sample analysis. Record results of such checks and review in a notebook reserved for such QA records. 11. To keep a copy of all SOPs and protocols for which the QAU is responsible. A log containing all versions of SOPs excluding analytical procedures is to be kept and updated by the QAU. 12. Responsible for the management of SOPs. This management includes the distribution to the operations, change control, review procedure, and approval for compliance of the SOPs. 13. To keep a copy of the master schedule (see appropriate SOP) of all projects. A log is to be kept and updated by the management. This log is to be archived annually. 14. Responsible for assuring that training programs are established and documented and that the content and frequency of the training programs supports the application of cGLP. 15. To ensure that a proper validation program is in place and functional for computerized systems and for instruments. 16. To review standard, calibrator, quality controls, and reagents preparation, validation and documentation. 17. Responsibilities and procedures applicable to the QAU, the records maintained by this unit and the method used to index these documents are to be in writing, kept up to date and archived when appropriate. Preferred candidate profile Candidate with CRO experience preferable.

Role & responsibilities Validation Engineer • Expertise in preparing end-to-end validation documentation including protocols and reports. Collaborates closely with the testing team to ensure execution aligns with requirements. • Should utilize a risk-based approach for validation/testing. Veeva tool Preferred candidate profile

Title : GXP Validation Testing | 4 to 18 years | Mumbai, Pune, Hyderabad & Bengaluru Design, develop, and execute test cases, test scripts, and test plans based on project requirements. Conduct functional, regression, integration, and acceptance testing. Track and document defects, issues, and ensure timely resolution. Collaborate with cross-functional teams to understand requirements and provide feedback on system designs. Ensure all manual testing activities are documented according to company policies and standards. Apply GXP testing practices (Good Laboratory Practices, Good Manufacturing Practices, Good Clinical Practices) to ensure software meets regulatory compliance and industry standards. Participate in audits and inspections for compliance with regulatory guidelines. Review and verify that systems and software adhere to FDA, EMA, and other regulatory body standards. Ensure traceability and validation of test results in a controlled environment. Job Description - Grade Specific GXP Validation Testing Life Science Domain experience

Company Brief Planys is a deep tech start-up revolutionizing infrastructure integrity and risk assessment. Planys specializes in smart underwater inspection solutions and sophisticated digital analytics and reporting of NDT data. Planys envisions to steer a new course in the maintenance and inspection industry with its disruptive innovations in the field of marine robotics, novel underwater NDT methods and AI enabled post-inspection analytical digital reporting dashboard. Planys helps asset owners/operators in taking data-driven decisions for effective maintenance and repair of their critical assets. (Website: www.planystech.com) Role & Responsibilities Design of Hardware architecture of Embedded Electronics, Power Electronics, and Communication System Responsible for the Circuit Simulation, Thermal Analysis, Circuit Design & PCB Design Familiar with firmware development of MCUs like AVR & ARM family microcontrollers Market survey of Products, BOM preparation, Reports & Manual Preparation, and Inventory & Vendor Management Prior hands-on experience in any electrical and Electronics domain Familiarity with Electronic components, testing and measuring equipment. Soldering and Testing of OEM hardware (Hands on with ROV and AUV is preferred) Good hands-on skills in MS Office tools especially Excel and Word. Verbal, Written, Presentation, Communication Skills. 5S and Safety at EE laboratory & Assembly workshop Minimum 2+ years Experience in EE Domain as a hardware Design Engineer (Embedded /Power Electronics)

Validating and Debug the ULTRA Low Power Designs Bare Metal or Linux Driver Development Firmware Development C Programming Handle Lab Equipments Testing on Software and Hardware Integration on Both Pre and Post Silicon

JOB SUMMARY Assist in the development, testing, release, and integration efforts of software and hardware associated activities. MAJOR RESPONSIBILITIES Hardware and software integration of new and/or existing systems, functions and LRUs designed by the Development Engineering and the Software Development groups. • Integration test of LRU and system functionality. • Ensure all testing is properly documented and submitted. • Coordinate activities for systems development, integration, test, and software/hardware release. • Responsible for the integration and maintenance of a test rack configuration with regards to the systems installation. Software and system testing of all In-flight Entertainment (IFE) functionality for existing systems. • Participate in the design and development of all IFE system functionality. • Participate in all efforts in the testing and regression testing of software phase releases. • Assist and support all engineering efforts company-wide as required. • Develop test plans and procedures to validate system requirements. Troubleshoot problems reported for IFE products. • Focal for software development, integration and problem investigation for all assigned equipment and systems. • Conduct in-depth troubleshooting and analyze root cause of any system anomalies/discrepancies in hardware and/or software. • Provide solutions and recommendations to project lead. KNOWLEDGE/SKILL REQUIREMENTS • A strong technical background in development and test. • Solid background and understanding of Unix and Linux OS. Familiarity of systems administrator capabilities and command language for Linux is preferred. • Proficient in project planning and ability to plan for internal and/or external dependencies. • Knowledgeable with commonly used concepts, practices, and procedures within the Electronic Engineering field. • Uses professional concepts while applying company policies and procedures to resolve a variety of issues. • Uses clearly demonstrable skills as an experienced professional within the Hardware Engineering field. • Must be capable of clearly identifiable contributions to the success of a product or project. • Works on problems of moderate scope where analysis of situations or data requires a review of a variety of factors. • Possess one or more of the following: o Experience with telephony, cell modem, wireless, SATCOM, Ethernet networks and ARINC protocols. o Experience in embedded software development testing. o Experience with working in real-time operating system environments. o Aircraft engineering or avionics industry related experience. • Excellent writing and strong communication skills. • Ability to effectively communicate in English, in person and on the phone. • Proficiency with Microsoft Office products. EDUCATION/EXPERIENCE REQUIREMENTS • Bachelor of Science Degree in Computer Sciences, Computer Engineering, Electrical Engineering or Software Engineering, or equivalent experience. • 3-6 years of experience in software/system engineering development and/or software/hardware testing. • IFE and/or Avionics industry-related experience is preferred.

Dear Candidate, We have an urgent opening in Test & Development role. Candidate should be graduated with BE/B.Tech. Role & responsibilities 1. Machine build, SOPs, testing as per various test standards. 2. Protoshop facility operational execution for test needs on man, machine engagement for product delivery. 3. Product build/test documentation and upkeep. 4. Components handling, assembly, installation, functioning, trouble shooting and corrective actions. 5. Field test experience will be an added advantage. Preference would be given to those having worked in test instrumentation and analysis, field correlations and endurance (MTBF analysis). 6. Experience on test standard development is expected 7. Should be able to work and guide a team of test engineers and operators within the company and partner associates 8. Should have good understanding of concepts and strong analytical skills apart from good communication skills. 9. Recording of failures, report preparation, closer of concerns. Key Deliverables: 1. Machine Build 2. Machine Endurance 3. Machine DVPSOR Testing 4. Machine Performance testing Interested one`s can share their Cv at swati.shikha@mounttalent.com or can reach me 9560495550.

Job Description Name of the Post: Electronic Hardware Test Engineer No of Posts: 1 Location: Bangalore Roles and Responsibilities: Enable to the Hardware electronics systems and test equipment to integrate in Test Automation frameworks Design and Development of Test suites scenarios for the 4G and 5G system. Write, design, and execute automated tests by creating scripts that run testing functions automatically Maximize test coverage for the most critical features of the system Determine the priority for test scenarios and create execution plans to implement these scenarios Testing and Validation of 4GRAN, 5GRAN systems Debugging and maintaining the 4GRAN, 5GRAN systems Generating and Analyzing the Test Reports and Validation Reports Generation and Review of Specifications for 4G and 5G systems Review test result data to ensure that actual performance meets expected requirements Provide technical support in performing RF system testing Design test fixtures and develop and calibrate test equipment. Skills and Abilities: Hands-on experience with RF equipment is an advantage (signal analyzers, oscilloscopes, signal generators, power meters) Moderate to Expert level knowledge on 4G/5G Base Station RF Conformance tests. Solid knowledge of 4G/5G standard, especially air interface Comprehensive knowledge in the field of hardware development and testing Understanding the Industry Standards: 3gpp standards, Tec standards Moderate Knowledge on simulators: 2G/3G/4G node Simulators, UE simulators, Channel Emulators, Driver test tools and basic electronic system testing measuring tools Moderate knowledge on Software testing tools: Wire shark, Scripting languages. Linux administration and Linux networking Minimum Qualifications: B.E/B.Tech in Electronics & Communication Engineering or equivalent degree from recognized college/university Minimum 3 years of professional work experience post qualification.

Job Area: Engineering Group, Engineering Group > Hardware Engineering General Summary: As a leading technology innovator, Qualcomm pushes the boundaries of what's possible to enable next-generation experiences and drives digital transformation to help create a smarter, connected future for all. As a Qualcomm Hardware Engineer, you will plan, design, optimize, verify, and test electronic systems, bring-up yield, circuits, mechanical systems, Digital/Analog/RF/optical systems, equipment and packaging, test systems, FPGA, and/or DSP systems that launch cutting-edge, world class products. Qualcomm Hardware Engineers collaborate with cross-functional teams to develop solutions and meet performance requirements. Minimum Qualifications: Bachelor's degree in Computer Science, Electrical/Electronics Engineering, Engineering, or related field and 4+ years of Hardware Engineering or related work experience. OR Master's degree in Computer Science, Electrical/Electronics Engineering, Engineering, or related field and 3+ years of Hardware Engineering or related work experience. OR PhD in Computer Science, Electrical/Electronics Engineering, Engineering, or related field and 2+ years of Hardware Engineering or related work experience. Over 8+ years of related work experience Possesses in-depth knowledge and hands-on experience with peripheral protocols such as CXL3.0 and PCIe Gen5/6 Validation, along with exposure to server chips. Skilled in bare metal/Linux driver development and proficient in C programming. Experienced in complex SoC software development and hardware validation testing, covering functional, performance, compliance, and power aspects. Proficient with debug and lab tools, including Lauterbach, oscilloscopes, and protocol analyzers.

Responsibilities:- Perform preventative maintenance Installation Qualification IOP Perform Calibartion & validation Troubleshooting Identify and resolve issues with various equipment On Site Service Regular visiting different client locations Accidental insurance Annual bonus Performance bonus Mobile bill reimbursements Gratuity Provident fund Travel allowance Food allowance

Thermosystems Pvt Ltd List of Responsibilities: Experience : 8-16 years of relevant experience in handling of large-scale Civil Construction projects. A competent professional with technical acumen and project management skills for handling large scale Infrastructure development projects from conceptual stage to final delivery Qualification: B.E. / B. Tech (Civil) from a reputed institute Location : Noida, Sector-2 Software Required : Autocad, Staad Pro & Foundation, MAT3D, Revit, Tekla, 3D Modeling on PDMS, E3D, Microstation Senior Civil Engineer is a member of the project management Team who is responsible to oversee the design and building of large construction projects including Oil & Gas, Power Plants, Material Handling projects pipelines & buildings and prepare project plans, inspect designs and manage budgets and resources. Manage a team of Engineers who are responsible for overseeing project activities. Coordinate with the project management team during the FEED, Basic Engg & EPC stages. Provide direction and leadership to the Civil Engineers. Responsible for production of deliverables, which may include engineering support to design calculations, specifications, procedures, analysers, progress reports, bid evaluations, study report and various 3rd party submissions or contractors submissions. Performs inter -discipline& discipline QA/QC and engineering compliance checks on all work performed by themselves or Junior engineers within group. Understands company requirements; identifies and addresses design parameters and problem; develop and implements solutions. Independently evaluate, organize and priorities work which normally subject to internal checking and approval, interface with other project specialist and Lead engineers. Manage direct reports including managing work allocation, training, mentoring, problem resolution, performance evaluation, and the building of an effective team dynamic. website: www.thermosystems.co.in Functional Skill Good exposure in Civil design and core standard specifications, Structural and Civil load calculations, Equipment facing, Familiar with overall Plot plant, Civil Foundation, Shallow, Depth, Stone & Concrete Column, etc. Should have Soil Investigation and Topography exposure. Experience of coordinating with project engineering team during FEED and EPC stages. Experience of coordinating with contractors and sub-contractors during construction stage. Confidence to deal with individuals at all levels in the organization, Proven conflict resolution skills

At TE, you will unleash your potential working with people from diverse backgrounds and industries to create a safer, sustainable and more connected world. Job Overview As a Test and Validation Engineer for TE Connectivity you will focus on test system design and verification-validation testing of high-speed products in cable assemblies targeting high speed communications and connectivity within datacenters and wireless infrastructure. You will be expected to independently work on projects in the areas of validation for product, test system design including selection of hardware and programming. You will work collaboratively within a broader cross functional team of electrical, mechanical, manufacturing, & operations to execute leading edge products designs. You will be the responsible for the electrical validation of a product/platform beginning with the initial analysis and leading into production verification testing and manufacturing. You will tackle challenging design problems and utilize cutting edge hardware and software tools to guide complex designs toward success. Responsibilities Responsibilities Subject matter expert in high-speed test systems and validation activities through product development cycles Testing, performance enhancement, and validation of high-speed cable assemblies using BERT s, network switches, traffic generators, etc. Establishing testing requirements for new products based on electrical and software specifications Development of high-speed cables test systems/fixtures from conception to manufacturing deployment Test system architecture, system diagramming, test software, hardware build, and validation into manufacturing of product Creating actionable recommendations based upon design reviews and product specifications Making data driven decisions about the product functionality and areas for improvement. Required Skills Bachelor s degree in Electrical Engineering, Master s degree preferred Minimum of 10+ years of work experience in a high-speed test engineering role Experience with cable/cable assembly designs (high speed twin-ax cables, direct attach copper (DAC) cables, active copper cables) Experience with high speed test equipment (Digital Sampling Oscilloscope, Vector Network Analyzer, Bit Error Rate Tester, TDR, Pattern Generators, Power Supplies, etc.) Strong experience with Python Strong analytical capabilities to interpret test/lab data to identify issues and provide solutions to fix identified problem. Experience in project leadership, especially as it applies across design, development & manufacturing teams Excellent verbal and written communication skills Ability to work in a global environment - able to accommodate varying time zones, fluent in English (verbal/written), able to collaborate with individuals across geographies Individual must be highly motivated, a quick learner, and able to work independently Nice to have Skills/Experience: Familiarity with embedded systems and ANSI C Familiarity with NI Test Stand Familiarity with signal conditioning techniques (equalization, amplification, FIR s, CTLE s) Familiarity with SFF/IEEE specifications for high speed cable assemblies Familiarity with PAM4/8 and other higher order modulation techniques Six Sigma methodologies or other strong data analytics background a PLUS Competencies Location

Mechanical Engineer experience in Li-Ion Battery Pack design, development and testing. (with automotive background) EDUCATION : • BE/B.TECH in Mechanical Engineering/equivalent EXPERIENCE : • 5 to 7 Years of experience in Mechanical design, development, prototype development and testing preferably having experience in automotive background. RESPONSIBILITIES : • Analyze the customer requirements, standards, product requirements and prepare detailed mechanical requirement specification. • Prepare mechanical design for Battery pack assembly – Plastic enclosures, sheet metal brackets, Die-cast part, Busbars, Insulation sheet design, sealing, assembly techniques, etc. using SolidWorks. • Estimation of effort and planning for Mechanical design and development. • Coordinate with Circuit team to prepare design layout for electrical components like – Circuit board, relay, fuse, wiring harness, etc. • Perform design calculations like clearance-creepage, stack-up analysis, glue dozing quantity, screw selection based on strength, Thermal calculations, gasket or sealant design etc. • Apply Design For Manufacturing and Design For Assembly guidelines in the design to meet manufacturing and Assembly requirements • Plan/strategize for the required analysis for analytical verification of concepts. • Analyze the Risk in the design by FMEA methodology in accordance with AIAG-VDA approach. • Prepare 2D Manufacturing drawings, conduct tolerance stack-up studies. • Prepare test plans, test cases and testing of battery components to confirm the requirements. SKILLSETS : • Experience in executing the Automotive project as per process standard – IATF16949 • Experience in completing at least one product from Requirements to mass production • Expertise in SolidWorks CAD Software and knowledge in any simulation software • Experience in plastic, sheetmetal, Busbar, sealing design and Die-casting. • Exposure in thermal cooling design techniques. • Knowledge in material selection based on various properties. • Experience in sealing design techniques based on Ingress protection (IP) rating • Experience in GD&T and Tolerance Stack-up studies • Knowledge in design/product validation testing • Exposure in manufacturing techniques – Injection molding, stamping, machining, etc. • Knowledge of automotive & Li-Ion Battery test and regulatory standards – ISO, IEC, UN

Sitero is an emerging leader in Clinical services and software solutions for the life sciences industry. We have experience and expertise in a diverse range of therapeutic areas and focus on innovative, technology-enabled solutions that allow our clients to focus on their core strengths. For early phase studies through Phase III clinical trials, our experienced team delivers high-touch services and technology to ensure the safety of all stakeholders across the clinical research community with an emphasis on ethics, compliance, and innovation. Job Title: Automation Engineer Location: Bangalore Office Based (Hybrid Model) Function: Validation Services ESSENTIAL DUTIES AND RESPONSIBILITIES: Ensures software applications are accurate, complete and conform to all user, company and regulatory requirements by Planning, creating, and implementing automated verification processes. Creating associated validation documentation using proper documentation methods Assisting in the development and maintenance of automated testing procedures, processes, and quality standards Performing troubleshooting methods as necessary to maintain a stable and effective automated testing environment. Working with software developers and testers to resolve issues and retest applications. Evaluating and analyzing test results Participating in project team meetings as needed Updating automated test scripts by Identifying necessary automation techniques/tools Maintaining scripts and associated test matrices Identifying new areas for regression testing Maintains Quality Service and Departmental Standards by Reading, understanding and adhering to organizational Standard Operating Procedures (SOPs) Assisting in establishing and enforcing departmental standards including defining, documenting and implementing validation standards as needed Contributes to team effort by Performing code reviews and offer feedback on best coding practices when necessary. Offering technical and quality feedback/advice to both internal and external client. Working with internal staff including technical staff, project managers and applications developers to assist with the development of project specifications. Exploring new opportunities to add value to organization and departmental processes. Helping others to achieve results. Maintains Technical and Industry Knowledge by Attending and participating in applicable company-sponsored training EDUCATION AND EXPERIENCE REQUIRED: Education: Bachelors degree in Computer Science, Engineering, Life Sciences or related field required. Experience: 3+ years’ experience in validation/software testing required. Experience working with test automation development tools – such as Eclipse, Git, Java, Selenium, TestNG, Grid (and optionally CodedUI) preferred Experience working with computer software including Word, Excel and Teams preferred. API testing knowledge, familiarity with tools such as Postman, SoapUI preferred. 3+ years’ experience working with clinical trials and/or within pharmaceutical environment preferred. Working knowledge of the drug development process including knowledge of FDA requirements for GxPs and 21 CFR Part 11 preferred Proven problem-solving abilities. PREFERRED SKILLS: Ability to adjust to changing priorities. Strong understanding automated software QA methodologies. Excellent attention to detail and orientation toward careful meticulous work Must be highly motivated, result-oriented, and possess the ability to handle multiple projects with multiple deadlines concurrently with minimal supervision. Strong problem-solving, documentation and organizational skills Excellent oral and written communication skills Ability to project and maintain a professional and positive attitude. COMPENSATION & BENEFITS: Sitero proudly offers an impressive compensation package and benefits, including a competitive salary, Variable pay, paid time off, and healthcare and retirement benefits. EMPLOYMENT TYPE: Full Time, Permanent COMMITMENTS: Standard Hours 40 hours per week, one hour lunch, Monday – Friday. Additional hours as needed. Willing to work in shifts as and when needed. DISCLAIMER: Sitero is an equal opportunity employer and welcomes all job applicants. All qualified applicants will receive consideration for employment without discrimination on the basis of race, color, religion, sex, sexual orientation, gender identity, national origin, protected veteran status, disability, or any other factors prohibited by law.

Hi, We are hiring for ITES Company for Validation Associate Role. Job description ***Minimum 3 years as Validation Associate is required.*** 1. Data validation test script creation: Create necessary validation scenarios needed to ensure checks are functioning as required and document scenarios in the Data Validation Specification(DVS). Document expected results for each testing scenario. Feedback to the clinical Data Scientist (CDS) any ambiguities in logic that require clarification for testing scenario creation. 2. Data validation test script execution: Entry of test data as specified in each testing scenario Compare the result obtained through entry of the test data to the expected result. Re-execute all checks that do not pass to ensure they are actual failure. Document validation failures. For validation failures due to incorrect testing scenarios, update DVS and re-execute testing scenario. Re-execute and document within the DVS validation results for checks that required programming updates. 3. Validation of the SI data set creation process: Enter data into all study visits and forms. Extract data from InForm into SI datasets Generate list of data within InForm Generate list of data contained within SI datasets Compare InForm listing to the SI dataset listing. Document unexpected inconsistencies between listing. Review time slicing specification against the SI data sets to ensure time slicing variables are being accurately populated. Document incorrect/unexpected time slicing variable assignments. Compare the pre-defined variable values as specified in the DVS against the SI data sets. Document inconsistencies To Apply, WhatsApp 'Hi' @ 9151555419 Follow the Steps Below: >Click on Start option to Apply and fill the details >Select the location as Other ( to get multiple location option ) a) To Apply for above Job Role ( Mumbai ) Type : Job Code # 171 b) To Apply for above Job Role ( Pune ) Type : Job Code # 172 c) To Apply for above Job Role ( Indore ) Type : Job Code # 174

Notice Period : Immediate - 15 Days Key Responsibilities : - Software Development : Implement software solutions using Python programming language. - Test and Validation : Design and execute comprehensive test cases to ensure software quality. - Technical Documentation : Create clear and concise technical documentation. - Customer Support : Respond to customer inquiries and resolve issues in a timely manner. - Automation : Automate design steps within the VLSI CAD flow. - Agile Development : Work in Agile Scrum teams and follow Agile methodologies. - Collaboration : Collaborate with customers to align on project requirements and present project updates. - Quality Assurance : Adhere to coding standards and quality processes. Required Skills and Experience : - 5+ years of experience in software development. - Strong proficiency in Python programming language. - In-depth knowledge of object-oriented programming concepts. - Excellent understanding of Unix/Linux operating systems and shell scripting. - Experience with development tools like Git-BitBucket, JIRA, and Confluence. - Strong problem-solving and analytical skills. - Excellent communication and collaboration skills. Mandatory Skills : - Python Mandatory Expert 60m - Software Development Mandatory Expert 60m - Unix Mandatory Intermediate 48m - Cadence Optional Beginner 12m - Logical Physical Synthesis Optional Beginner 12m Highly Desired Skills : - Experience with CI/CD tools like Jenkins, GitLab, StockStorm, and Camunda. - Background in semiconductor, EDA, or tool development domains. - Experience working in Agile Scrum teams. - Understanding of VLSI CAD flows.

Notice period : Immediate to 15 Days Location : Bangalore Key Responsibilities: - Design, develop, execute, debug and automate tests to validate security FW. - Validate security firmware encompassing a wide range of security features at functional and system level. - Develops and execute test plans to evaluate functionality, security, and efficiency of firmware utilizing emulation and evaluation boards for pre-silicon and post silicon testing. - Work closely with security lead and other stakeholders to understand requirements and provide feedback. - Triage, analyze, debug, fix and drive issues/tasks to closure. Educational Background : Bachelors or masters in EE or CS or equivalent is required Must Have Requirements: - A minimum of 4 years' experience and maximum of 7 years of experience in security firmware validation on ARM and RISC V microprocessors. - High level understanding of cryptography concepts (symmetric and asymmetric cryptography, Root of Trust etc.,) - Proficient in defining, designing and developing manual/Automation test cases for firmware functional level testing and system level testing. - Hands on experience with Jenkins, shell/python scripting - Hands on experience with C programming. - Must be proficient with hardware board setup. - Candidate must be available to work out of AMD Whitefield Office on most working days - Experience in semiconductor domain preferred. - Quick learning and self-motivated. - Good written and verbal communication skills in English

Optum is a global organization that delivers care, aided by technology to help millions of people live healthier lives. The work you do with our team will directly improve health outcomes by connecting people with the care, pharmacy benefits, data and resources they need to feel their best. Here, you will find a culture guided by inclusion, talented peers, comprehensive benefits and career development opportunities. Come make an impact on the communities we serve as you help us advance health optimization on a global scale. Join us to start Caring. Connecting. Growing together. Test Planning & Automation Lead - Cloud Data Modernization Position Overview: We are seeking a highly skilled and experienced Test Planning & Automation Lead to join our team for a Cloud Data Modernization project. This role involves leading the data validation testing efforts for the migration of an on-premises Enterprise Data Warehouse (SQLServer) to a target cloud tech stack comprising Azure Cloud data tools (ADF, SHIR, Logic Apps, ADLS Gen2, Blob Storage, etc.) and Snowflake. The primary goal is to ensure data consistency between the on-premises and cloud environments. Primary Responsibilities Lead Data Validation TestingOversee and manage the data validation testing process to ensure data consistency between the on-premises SQLServer and the target cloud environment Tool Identification and AutomationIdentify and implement appropriate tools to automate the testing process, reducing reliance on manual methods such as Excel or manual file comparisons Testing Plan DevelopmentDefine and develop a comprehensive testing plan that addresses validations for all data within the data warehouse CollaborationWork closely with data engineers, cloud architects, and other stakeholders to ensure seamless integration and validation of data Quality AssuranceEstablish and maintain quality assurance standards and best practices for data validation and testing ReportingGenerate detailed reports on testing outcomes, data inconsistencies, and corrective actions Continuous ImprovementContinuously evaluate and improve testing processes and tools to enhance efficiency and effectiveness Comply with the terms and conditions of the employment contract, company policies and procedures, and any and all directives (such as, but not limited to, transfer and/or re-assignment to different work locations, change in teams and/or work shifts, policies in regards to flexibility of work benefits and/or work environment, alternative work arrangements, and other decisions that may arise due to the changing business environment). The Company may adopt, vary or rescind these policies and directives in its absolute discretion and without any limitation (implied or otherwise) on its ability to do so Required Qualifications Bachelor degree or above education Leadership Experience6+ years as a testing lead in Data Warehousing or Cloud Data Migration projects Automation ToolsExperience with data validation through custom built python frameworks and testing automation tools Testing MethodologiesProficiency in defining and implementing testing methodologies and frameworks for data validation Technical ExpertiseSolid knowledge of Python, SQL Server, Azure Cloud data tools (ADF, SHIR, Logic Apps, ADLS Gen2, Blob Storage), Databricks, and Snowflake Analytical Skills: Proven excellent analytical and problem-solving skills to identify and resolve data inconsistencies CommunicationProven solid communication skills to collaborate effectively with cross-functional teams Project ManagementDemonstrated ability to manage multiple tasks and projects simultaneously, ensuring timely delivery of testing outcomes Preferred Qualifications Experience in leading data validation testing efforts in cloud migration projects Familiarity with Agile methodologies and project management tools At UnitedHealth Group, our mission is to help people live healthier lives and make the health system work better for everyone. We believe everyone-of every race, gender, sexuality, age, location and income-deserves the opportunity to live their healthiest life. Today, however, there are still far too many barriers to good health which are disproportionately experienced by people of color, historically marginalized groups and those with lower incomes. We are committed to mitigating our impact on the environment and enabling and delivering equitable care that addresses health disparities and improves health outcomes — an enterprise priority reflected in our mission.

Job Description- Senior SDET Engineer with 5+ Years of experience Rest assured API, API Automation, Java and Selenium Strong in Software Development testing concepts and principles Strong in Java Experience in Rest Assured (API automation tool) is a must Automation Testing Experience using Selenium Web driver. Experience in automation framework creation and maintenance Strong hands-on experience in UI and API automation Experience in Playwright is an added advantage Good communication and interpersonal skills Job Location- Bangalore/Bengaluru Work Mode- 5 Days Work From Office Interview Mode- 1st Round will be Virtual, 2nd Round will be F2F Shift Timings- General

Job Description We are seeking a skilled SDET to drive quality assurance through integration testing, automation, and data migration validation. The role focuses on designing automated test frameworks to ensure robust data migration and seamless system integrations. Key Responsibilities Develop and execute automated integration tests for data migration workflows. Design and maintain automation scripts to validate system functionality and data integrity. Collaborate with development and data teams to ensure quality in migration processes. Identify, report, and track defects to ensure high-quality deliverables. Optimize testing processes for efficiency and coverage. Qualifications Strong experience in integration testing and test automation. Proficiency in automation tools and frameworks (e.g., Selenium, JUnit). Familiarity with data migration testing and validation. Excellent analytical skills and attention to detail.