67 Ut Jobs

We are currently looking to hire an NDT Engineer with significant experience in Oil & Gas, Pipe Spool Fabrication, and Refinery projects. As an NDT Engineer, your main responsibilities will include carrying out inspections based on the inspection and test plan for Pipe Spool Fabrication. This will involve tasks such as material verification, fit-up checking, coating and blasting inspections, and reviewing procedures for quality assurance. You will also be responsible for assigning welding procedures, conducting welder training and qualification, as well as surveillance and checking during welding processes. Additionally, you will be involved in welding visual inspections, radiography/AUT marking, radiography film reviewing, and repair checking as needed. Your role will also include final clearance and certification through an online application system. In terms of knowledge base, you are required to have knowledge of ASME B 31.3, Chapter V and VI. Furthermore, you should have knowledge of common materials, including different grades of carbon steels, stainless steels, LAS steels, as well as welding consumables and welding procedure requirements as per ASME Sec IX. Your role will also involve welding inspection and acceptance, NACE Level II and Level III for coatings, NDE Level II, PWHT, and hardness checking as per ASME B 31.3. Familiarity with radiography/UT/PT/MPT inspection as per ASME B 31.3 is also necessary. To be considered for this position, you must hold a Certified NDT Certificate and have a minimum of 10 years of experience as a Graduate Engineer. Alternatively, if you are a Diploma Engineer, you should have a minimum of 5 years of experience in QA/QC functions of Refinery, Petrochemical, and Infrastructure projects.,

You have an urgent requirement for a Material Inspection Engineer with good years of experience in oil Gas / Pipe Spool Fabrication. As a Material Inspection Engineer, your responsibilities will include: - Carrying out inspection as per inspection and test plan for Pipe Spool Fabrication. - Conducting material verification and fit-up checking. - Performing coating and blasting inspections. - Reviewing procedures for Quality Assurance. - Assigning welding procedures for welding. - Conducting welder training & qualification. - Providing surveillance/checking during welding. - Performing welding visual inspection. - Managing radiography/AUT marking including lot formation. - Reviewing radiography films and/or witnessing AUT. - Checking repairs in case of repair. - Providing final clearance and certification (Online through application). Your knowledge base should include: Required: - Knowledge on ASME B 31.3, Chapter V and VI. - Knowledge on common materials including different grades of carbon steels covering LTCS, NACE, different grades of SS covering 304, 304L, 316, 321, and 347, different grades of LAS steels covering P11, P22, P5, P9, and P91. - Understanding of welding consumables and welding procedure requirements including welder qualification as per ASME Sec IX. - Experience in welding inspection and acceptance. - NACE Level II and Level III for Coatings. - NDE Level II. - Knowledge of PWHT and hardness checking as per ASME B 31.3. - Experience in radiography/UT/PT/MPT inspection as per ASME B 31.3. Necessary: - Graduate Engineer with a minimum of 10 years of experience. - Diploma Engineer with a minimum of 5 years in QA/QC functions of Refinery, Petrochemical, Infrastructure projects.,

We have an urgent requirement for a Pipe Welding Engineer with good years of experience in Oil & Gas, Refinery, and Pipe Spool Fabrication. Position: Pipe Welding Engineers Responsibilities: Carrying out inspection as per the inspection and test plan for Pipe Spool Fabrication, including: - Material verification and fit-up checking - Coating and Blasting Inspections - Reviewing Procedures for Quality Assurance - Welding procedure assignment for welding - Welder training & Qualification - Surveillance/checking during welding - Welding Visual inspection - Radiography/AUT Marking including lot formation - Radiography Film Reviewing and/or witnessing AUT - Repair checking in case of repair - Final Clearance and certification (Online through application) Knowledge Base: Required: - Knowledge of ASME B 31.3, Chapter V and VI - Knowledge of Common Materials including Different grades of carbon steels covering LTCS, NACE, different grades of SS covering 304, 304L, 316, 321, and 347, Different grades of LAS steels covering P11, P22, P5, P9, and P91. - Welding consumable and welding procedure requirements including welder qualification and per ASME Sec IX. - Welding Inspection and acceptance - NACE Level II and Level III for Coatings - NDE Level II - PWHT and hardness checking as per ASME B 31.3. - Radiography/UT/PT/MPT inspection as per ASME B 31.3 Necessary: - Graduate Engineer: Minimum 10 years - CSWIP 3.1 - Diploma Engineer: Minimum 5 Years in QA/QC functions of Refinery, Petrochemical, Infrastructure projects.,

You are seeking a Lead Engineer Manager/ Quality Manager with substantial experience in Oil & Gas Fabrication and Pipe Spool Fabrication. As a Lead Engineer Manager/ Quality Manager, your responsibilities will include conducting inspections in accordance with the inspection and test plan for Pipe Spool Fabrication. This entails tasks such as material verification, fit-up checking, coating, and blasting inspections. You will also be responsible for reviewing procedures for quality assurance, assigning welding procedures, conducting welder training and qualification, surveillance during welding, welding visual inspection, radiography/AUT marking, radiography film reviewing and/or witnessing AUT, repair checking, and final clearance and certification through an online application. In terms of knowledge base, it is required that you possess knowledge of ASME B 31.3, Chapter V and VI, common materials such as different grades of carbon steels, LTCS, NACE, different grades of stainless steels like 304, 304L, 316, 321, and 347, as well as different grades of LAS steels including P11, P22, P5, P9, and P91. Additionally, you should be familiar with welding consumables, welding procedure requirements, welder qualification as per ASME Sec IX, welding inspection and acceptance, NACE Level II and Level III for coatings, NDE Level II, PWHT, and hardness checking as per ASME B 31.3, and radiography/UT/PT/MPT inspection as per ASME B 31.3. The ideal candidate for this position should be a Graduate Engineer with a minimum of 15 years of experience or a Diploma Engineer with a minimum of 10 years of experience in QA/QC functions of Refinery, Petrochemical, and Infrastructure projects.,

Roles & Responsibilities: Proficient in ReactJS including framework, GitHub, Git commands Develop code based on functional specifications through an understanding of project code Test code to verify it meets the technical specifications and is working as intended, before submitting to code review Experience in writing tests in ReactJs by using the React testing library OR JEST library Framework Experience in writing tests in Python by using Pytest Follow prescribed standards and processes as applicable to software development methodology, including planning, work estimation, solution demos, and reviews Read and understand basic software requirements Assist with the implementation of a delivery pipeline, including test automation, security, and performance Mandatory Skills ReactJS: React core concept, JavaScript Python: Python Flask, SQL Alchemy (ORM Structure this is mandatory), Pytest UT: React testing library for unit testing, JEST Data: Redux store or Apollo Database - Postgres SQL OR MySQL OR Any relational database. Expertise in object-oriented design and multi-threaded programming Good to have: Knowledge of Cloud like AWS Cloud, Lambda, S3, Dynamo DB Total Experience Expected: 04-06 years

Position Overview: We are seeking a dedicated and detail-oriented Quality Engineer to support our Quality Assurance and Quality Control operations. The ideal candidate will have 3-7 years of experience in fabrication and inspection of filtration systems, pressure vessels, and related process equipment. The role involves hands-on inspection, quality documentation, coordination with third-party inspection agencies, and ensuring compliance with industry standards. Key Responsibilities: Conduct in-process and final inspections of pressure vessels, filters, strainers, and associated fabrication work. Review and interpret engineering drawings, WPS/PQR, and material specifications for compliance. Prepare and maintain quality documentation , including inspection reports, test certificates, traceability records, and material test reports (MTRs). Coordinate with third-party inspection agencies (TPI) and clients during stage and final inspections. Support NDT activities including radiography, dye penetrant testing, ultrasonic testing, etc. Verify compliance with ASME, PED, IBR, and other applicable standards and codes. Participate in internal audits and assist in preparing for customer audits and QA documentation. Maintain calibration records and ensure availability of required inspection instruments. Raise non-conformance reports (NCRs) and work with production and engineering to implement corrective actions. Ensure the implementation of quality systems and continuous improvement practices across the shop floor. Qualifications & Skills: Diploma/Bachelors degree in Mechanical Engineering or equivalent 3–7 years of experience in Quality Control in a pressure vessel/fabrication-based manufacturing industry Sound knowledge of ASME Section VIII, PED, IBR , and other fabrication standards Familiarity with welding processes, NDT methods, and documentation requirements Proficient in MS Office and documentation tools Strong attention to detail and communication skills Ability to interpret technical drawings and specifications Preferred Skills: Certification in welding inspection (e.g., CSWIP, AWS-CWI) is a plus Experience working with ERP or quality management systems Exposure to Oil & Gas, Power, or Chemical process equipment inspection

A person with Diploma in mechanical engineering /metallurgy background with minimum Ultrasonic Testing (UT) & Radiographic Testing (RT) level II qualification and having good knowledge of NDE techniques. Thorough knowledge of NDE techniques, UT in particular is required. The person shall also have good hands-on experience in Ultrasonic inspection of welds preferably of pressure vessel. Knowledge of advanced NDE methods of PAUT and TOFD is considered added advantage. Person to be familiar with Pressure Vessel manufacturing and NDE. Knowledge of ASME codes and standards is desirable. Job Description include: Performing Ultrasonic inspection of welds of pressure vessels and other components. Preparation of reports. Preparation of technique sheets, procedures and calibration block drawings. Radiographic Testing Film review, techniques sheet review and procedure preparation. Overall NDE planning and execution of NDE activities. Interaction and coordinating with customers.

Required Education: Bachelors degree in Mechanical Engineering or allied engineering stream Experience: Minimum of 10 years of experience in Nondestructive Evaluation, with at least 3 years in a leadership or senior technical role. Application of NDT in Oil & Gas industry. Certifications: Level III certification in one or more NDE methods (e.g., ASNT NDT Level III, PCN, or equivalent). Minimum 5 years since obtaining first Level III or equivalent certification. Technical Skills: Expertise in multiple NDE techniques such as UT, RT, MT, PT, ET, or VT. Expertise in multiple NDE techniques such as UT, RT, MT, PT, ET, or VT. Expertise in advanced NDT techniques such as PAUT, ToFD, PECA, tube-inspection, laser scanning, QSR. Proficiency with NDE equipment, software, and interpretation / data analysis tools. Knowledge of materials science, metallurgy, or structural integrity principles. Roles and Responsibilities 1. Project Technical Leadership: Provide technical leadership on NDE-related projects and assignments, from proposing to planning through execution, ensuring timely delivery/submissions and adherence to quality standards. 2. Operational Planning: Develop and implement resource plans to meet project requirements 3. Technical Expertise: Provide advanced technical guidance in the development, implementation, and optimization of NDE techniques (e.g., ultrasonic testing, radiography, magnetic particle inspection, eddy current testing, etc.). Act as corporate Level 3 in training, consulting and project related activities. 4. Innovation and Operational Excellence: Drive continuous improvement in NDE processes, tools, and technologies to enhance efficiency, accuracy, and reliability of inspections. 5.Collaboration: Work closely with local and global teams to integrate NDE solutions as part of project executions as well as product developments. 6. Standards Compliance: Ensure all NDE activities comply with applicable industry standards (e.g., ASNT, ASME, API, ISO), regulatory requirements, and Oceaneering as well as customer specific procedures.

Overview TE - TPH Implementation for Banking Projec RFP phase for the implementation of the TPH module (MT to MX) Responsibilities Participate in business walkthrough and understand the documents shared by the BankUnderstand the business requirements, functionality, workflow, screen navigation and acquire good knowledge on the application to be testedRaise functional / business clarificationsDesign the Test case and Test data documentIncorporation of review comments on the Test ware preparedLogging of test execution results pass logs, defect logs, re-raise logs and closure logs Essential skills Extensive knowledge with T24 - TPH module (parameters, configurations, field level validations as per MX standards)- In depth knowledge between MT & MX standards as per SWIFT ISO 20022 standards- Good understanding of the TPH payment process and be experienced in creating transactions using the TPH screens- Integration experience with FCM & SWIFT systems - Previous work experience on both point 1 & 2 Experience 2-3 + Yrs

Roles & Responsibilities: Manage & can provide technical suport to team of Developers (React/Java) Proficient in ReactJS/Java including framework, GitHub, Git commands Develop code based on functional specifications through an understanding of project code Test code to verify it meets the technical specifications and is working as intended, before submitting to code review Follow prescribed standards and processes as applicable to software development methodology, including planning, work estimation, solution demos, and reviews Read and understand software requirements and can develope and support other developers as well. Assist with the implementation of a delivery pipeline, including test automation, security, and performance Assist in troubleshooting and responding to production issues to ensure the stability of the application Technical review of code developed by teams members and can manage code quality, Understanding of SonarQube /Checkmarkx tools. Mandatory Skills Java : Jackson, Intellij (IDE), Java EE 8/11, Hibernate (v5.4), Spring UT: React testing library for unit testing, JESTng (v5.3), SLF4J/Logback, Quarkus, Redis, Jax-Rs, ReactJS: React core concept, JavaScript UT: Karate, Cucumber, Mockito or Junit Database - MongoDB/Oracle with good handson on PL/SQL Expertise in object-oriented design and multi-threaded programming Total Experience Expected: 08-10 years

Job Description: Mechanical Inspector Raw Material & Forging Inspection Job Title: Mechanical Inspector Raw Material and Forging Inspection Location: Kolkata Job Summary: We are looking for a Mechanical Inspector with hands-on experience in raw material and forging inspection. This role involves incoming inspection of raw materials such as steel, aluminum, and alloys, as well as forged parts. The inspector will assess material certifications, dimensional accuracy, visual and surface defects, and ensure conformance to technical standards and specifications. Key Responsibilities: - Inspect incoming raw materials including bars, billets, plates, and forgings for dimensional and visual compliance. - Verify mill test certificates (MTC), heat numbers, chemical and mechanical properties against purchase specifications. - Perform hardness testing, grain flow inspection, and micro/macro structural evaluation (in coordination with lab). - Check forging defects like laps, folds, cracks, underfills, and surface decarburization. - Ensure traceability and proper marking of accepted materials and quarantining of rejected lots. - Coordinate third-party inspections, sample testing, and mechanical testing where applicable. - Utilize inspection instruments such as vernier calipers, micrometers, ultrasonic testers, and hardness testers. - Prepare inspection reports, NCRs, and maintain documentation for quality records. - Collaborate with procurement, engineering, and supplier quality teams to address non-conformances. - Follow safety and material handling procedures in the inspection area. Qualifications: - Diploma / Degree in Mechanical or Metallurgical Engineering. - 35 years of experience in raw material and forging inspection in a manufacturing or forging environment. - Understanding of metallurgy, forging processes, and inspection standards (e.g., ASTM, IS, EN). - Familiarity with NDT methods (UT, MPI, DPI) and grain flow orientation. - Ability to interpret material test certificates and engineering drawings. - Certified Level II in DP,VT & UT - Preferred Skills: - Knowledge of ISO 9001, IATF 16949, or AS9100 quality systems. - Hands-on experience with ERP or quality tracking software. - Basic understanding of material traceability and lot control.

Standards & Codes: ASME Section VIII Div. 1 & 2 ASME Section IX (Welding Qualifications ASME Sec V Welding & NDT: Welding process knowledge (SMAW, GTAW, SAW) WPS/PQR/Welder qualifications Non-Destructive Testing (RT, UT, PT, MT, VT) knowledge Interpretation of NDT results Fabrication & Inspection: Dimensional inspection of shells, heads, nozzles Monitoring fit-up and alignment (e.g., weld mismatch tolerances) Hydrostatic / pneumatic testing procedures Surface preparation and painting/coating inspection Materials: Review of Mill Test Certificates Traceability & material control Handling special alloys (e.g., stainless, Hastelloy) Documentation: Preparing Quality Dossiers / Manufacturers Data Reports Reviewing MDRs, ITPs (Inspection & Test Plans), QAPs Familiarity with project documentation control systems Software & Tools Proficiency with MS Office (Excel, Word) Experience with ERP/QMS systems (SAP, Oracle, etc.) Use of inspection instruments (micrometers, ultrasonic thickness gauges) Core Competencies Strong understanding of pressure vessel manufacturing workflows Ability to read and interpret fabrication drawings Knowledge of welding metallurgy and defects Understanding of calibration systems and control of measuring instruments Soft Skills Attention to detail and record-keeping Strong communication (to interface with clients and third-party inspectors) Problem-solving approach to NCRs and root cause analysis (RCA) Preferred / Desirable ASNT Level II Certification in at least 2 NDT methods Knowledge of ISO 9001 and ASME U-Stamp compliance

Role & responsibilities: Outline the day-to-day responsibilities for this role. Preferred candidate profile: Specify required role expertise, previous job experience, or relevant certifications.

Job Purpose Leads and supports project engineering, new product/technology development, product improvement and product standardization, and product qualification projects depending upon the assigned group. Serves as a technical point of contact for assigned work package scope, and may serve as a focal point for all communications related to scope. Develops product design, geometry standards documentation and product qualification requirements. Creates, reviews/approves part reports, drawings, engineering specifications and standards. Defines product quality, material, welding, and NDE requirements. Supports and manage project schedule and deliverables. Provides Management with technical assistance and work progress updates as requested. Mentors and provides technical guidance to Product Engineers and Designers/Drafters. Works collaboratively to accomplish project tasks. Provides independent review and approval of work packages. Provides vendors technical assistance and builds strong working relationships. Works to the requirements of industry code related to subsea production systems, TechnipFMC standards and client specifications. Adheres to all relevant work instructions and design guidelines, Clearly demonstrates creativity and innovation in finding solutions and alternatives. Develops unique solutions for complex technical problems that may include the design of new products/systems or the development of solutions having few or no precedents. This is an individual contributor position. The role is responsible for executing activities assigned by the manager, and execute it with the assigned team Consistently leads work packages and resources on a project basis. Ensures that project members understand business goals and creates energy and action toward those goals. Encourages and empowers others to achieve. Reviews and approves engineering designs (i.e. drawings, part reports, specifications, etc.) of existing and new technology or projects. Ensures that assignments meet standards and performance requirements within area of expertise. Actively manages and provides timely updates to engineering schedule, and engineering updates to the project and engineering management team. Prepares documentation, information, and communications such as ECN (Engineering Change Notices),part reports, and engineering specifications and ensures conformance to all policies and procedures related to engineering functions, labor reporting and systems reporting. Facilitate RCAs and provide design solutions to correct non-conformances while taking into account safety, quality, schedule, and cost. Support Quality Notification dispositions and supply chain issues as they arise. Provide expert technical support to equipment manufacturing, fabrication, assembly, Factory acceptance test (FAT) and System integration test (SIT) activities. Works with other engineering teams to ensure good communication of work load requirements and consistent approaches to analytical models and methodologies. Works with technical authorities in the company to define technical requirements which are appropriate for the products and consistent with industry practices. Finds creative solutions to multi-faceted and/or time-sensitive, complex problems. Identifies and utilizes available technical resources throughout TechnipFMC and externally. Consults with other departments on equipment designs. Anticipates potential problems and proactively solves complex problems through creative thinking, using internal and external resources. Prepares technical data and papers for sales personnel, customers, and publications. Makes presentations to customer management groups. Actively increases industry knowledge base through technical publications, forums, committee participation, trade shows, etc. Assists engineering manager with any requested technical and engineering related tasks You are meant for this job if: Degreed Mechanical Engineer with at least 6-years of Engineering experience in the Subsea Production System engineering, reduced to 4-years for Masters/PhD candidates. Demonstrated experience in supporting engineering for subsea projects constrained by safety, quality, delivery, and cost requirements. Experience in reviewing & approving engineering designs, documents, layouts, calculations and interpreting FEA/ structural analysis results. Strong knowledge of engineering discipline and physical modeling techniques (solid mechanics, fluid dynamics, heat transfer) is required. Experience conducting design analysis - hoop stress, flexibility, buckling, burst, fatigue, etc. Work experience must include experience with various ASME, API, NORSOK, and DNV Codes and Standards as it relates to subsea equipment design and manufacturing. Exposure to various manufacturing processes - forging, hot and cold extrusion, cladding, HIP, induction bending etc Exposure to welding codes and practices - ASME IX and API 1104. Exposure to NDE codes and practices - UT, PAUT, PT, RT, MPI per ASME V. Ability to manage the engineering projects within specified schedule and budget. Demonstrated organization and project planning skills. Accuracy, dependability, ability to manage schedule and prioritize work for self and others in team. Ability to work independently and as a part of a technical team - a self-motivated, self-starter. Ability to make independent system recommendations utilizing advanced analytical and problem solving skills. Strong written and verbal communication skills in English with ability to effectively transfer subject matter expertise. Ability to coach and mentor others

Job Profile: Job would be in core downstream Petroleum sector Candidate will be working mostly in field, that is Inspecting oil and gas pipelines across the country with latest, industry leading state of the art equipment Keen to be in field for extensive time when required for running the projects, can be for 6 months straight. Need to be physically fit to walk on the pipeline right of way with equipment all day and enjoy hard work Able to Perform Ultrasonic Testing and Magnetic Particle Testing by NDT equipment. Able to identify different types of corrosion/lamination/cracks etc. Able to use Angle Beam Probe (45/60/70) to find welding defects in joints Able to use Flaw detector (Modsonic or others) for A-scans and B-scans Be involved in report preparing with high end software and dealing with the client on day-to-day basis Be the sole point of contact between the client and senior engineers Be willing and keen to work at any level. Multitasking is a requirement (field and office ON at the same time) Be hungry for work and more work - as need to be aligned with the company Must be interested in a long-term employment as immense opportunities to grow within the company Must be totally self-motivated to be part of AEs growing team Qualification Required: B.E. / B.Tech / B.Sc./ Diploma / Graduate (Any branch) Experienced Required: 1-3 Years Experience as NDT inspector (or similar) for 1-3years will be preferred Perks and Benefits Based on candidate qualification, skills and experience Telephone Allowance PF Medical Insurance Gratuity Bonus Good Food Allowance Birthday vouchers About Allied Engineers (AE) : Been serving the Indian Oil and Gas industry since 1973. AE provides Pipeline Integrity Management services for assessing the health of a pipeline. AE is based out of Delhi and Faridabad, with a staff strength of 50. For more details, please visit our website www.alliedengineer.com

Dear Candidate, We are hiring an Ada Developer to build real-time, high-reliability software for aerospace, automotive, and defense applications. Key Responsibilities: Develop mission-critical systems in Ada 95/2005/2012 Write strongly-typed, concurrent code for embedded platforms Perform safety-critical software development under strict compliance Conduct rigorous testing and validation procedures Collaborate with hardware and QA teams for integration Required Skills & Qualifications: Proficient in Ada and embedded software development practices Familiar with SPARK Ada , Ravenscar profile , or real-time OSs Experience in DO-178C , ISO 26262 , or similar standards Soft Skills: Strong troubleshooting and problem-solving skills. Ability to work independently and in a team. Excellent communication and documentation skills. Note: If interested, please share your updated resume and preferred time for a discussion. If shortlisted, our HR team will contact you. Srinivasa Reddy Kandi Delivery Manager Integra Technologies

We are looking for a highly motivated and talented individual to join our team as a Management Trainee in Career Management, located at Lodha (I-Think Techno Campus) - JM. The ideal candidate will have 0 to 1 years of experience. Roles and Responsibility Develop and implement effective career management strategies to achieve business objectives. Conduct market research and analyze industry trends to identify new business opportunities. Collaborate with cross-functional teams to launch new products and services. Build and maintain strong relationships with clients and stakeholders. Identify and mitigate risks associated with career development initiatives. Monitor and evaluate the success of career management programs. Job Strong understanding of the banking and financial services industry. Excellent communication and interpersonal skills. Ability to work in a fast-paced environment and meet deadlines. Strong analytical and problem-solving skills. Proficiency in MS Office and other productivity software. Ability to think strategically and creatively. Experience in MT roles is preferred. Competitive salary and benefits will be offered to the right candidate.

Must be NDT level ll in VT,LPT,MT,UT. 4. Sound knowledge of UT weld scanning.(angle ,Normal probe) Familiar with the welding process, documentation, Coordinate with team as per plan, ISO3834 Location - Chakan, Pune Contact - Maya 9767897450

Job Title: PAUT Technician Department: NDT & Inspection Services Location: Vadodara, Gujarat Company: TCR Advanced Engineering Pvt. Ltd. Experience Required: 2 to 5 Years Job Type: Full-Time Role Summary: We are seeking a skilled and certified PAUT Technician with 2 to 5 years of hands-on experience in Phased Array Ultrasonic Testing. The ideal candidate will possess in-depth knowledge of advanced ultrasonic inspection techniques and be capable of executing inspections independently on-site or in our lab. Key Responsibilities: Perform PAUT inspections on welds, components, and materials as per project requirements and applicable standards. Calibrate PAUT equipment and set up scan plans using software. Interpret and evaluate scan data for flaws and discontinuities. Prepare detailed inspection reports and maintain proper documentation. Coordinate with clients and project engineers to understand job requirements and deliver quality services. Follow all safety and quality protocols during inspection activities. Support other advanced NDT techniques (TOFD, UTG, etc.) when required. Required Qualifications: Diploma / ITI in Mechanical Engineering or relevant discipline. Minimum 2 to 5 years of experience in PAUT inspection. Certification in ASNT/PCN Level II in PAUT (mandatory). Hands-on experience with PAUT equipment. Knowledge of NDT codes and standards. Good communication and report writing skills. Willingness to travel for on-site inspections if required. What We Offer: Competitive salary and benefits. Exposure to cutting-edge NDT technologies. Opportunities for learning and certification advancement. Supportive work culture and career growth at a reputed testing company. To Apply: Send your updated resume to hr@tcradvanced.com or on +917574834819.

Role & responsibilities: Quality check of delivered equipment, spares, installation, repair and maintenance at site & store. Conduct inspection against QA checklist, PO or Quality plan. Devise quality testing methods (MQP/QP) and carry out acceptability tests based on indents. Conduct prioritized check point surveillance of project through contractual quality plan. Manage post repair quality checks. Monitoring of Thickness survey, Fit-up, Welding, RT, UT & DPT Process, oxide scale measurement, application of protection shield in boiler, Heat treatment of weld joints etc. Conduct welder test, control over low hydrogen electrodes, PMI, Hardness test in boiler during Shutdown & Annual Overhauling. Inspection of valves though blue matching for boiler & turbine areas. Functional Competence Requirement: Knowledge of welding technology. Knowledge of destructive and non-destructive testing methods and having qualified NDT Level-2 in RT, UT, DPT, MPI. Know-how of metallurgy and material testing (PMI). Knowledge of national and international quality and testing standards (Like ASME Section IX, B31.1 Power piping, ASME Section VIII). Basic awareness of Testing Procedures in different engineering disciplines. Knowledge of Welder test for boiler & Radiography film interpretation. Knowledge of power plant equipment, spares & engineering drawings, turbine and its major equipment. Knowledge of Computer with MS office (Word, Excel, Power point), Google sheets & Report preparation etc.

We are looking for a highly skilled and experienced professional to join our team as an RSO Nuclear Medicine specialist at Vijaya Diagnostic Centre. The ideal candidate will have a strong background in healthcare, particularly in nuclear medicine, with 15-16 years of experience. Roles and Responsibility Conduct complex nuclear medicine procedures, including patient preparation, administration of radiopharmaceuticals, and data acquisition. Interpret imaging results, identify abnormalities, and provide accurate diagnoses. Develop and implement effective treatment plans for patients with various medical conditions. Collaborate with other healthcare professionals to ensure comprehensive patient care. Stay updated with the latest advancements in nuclear medicine technology and techniques. Participate in quality improvement initiatives to enhance patient safety and satisfaction. Job Requirements Strong knowledge of nuclear medicine principles, practices, and protocols. Excellent communication and interpersonal skills are required for interacting with patients, families, and healthcare teams. Ability to work effectively in a fast-paced environment with multiple priorities. Strong analytical and problem-solving skills are needed for interpreting complex data. Commitment to delivering high-quality patient care and maintaining confidentiality. Familiarity with hospital policies and procedures related to patient safety and radiation exposure.

Role: NDT Engineer Job Location: Chennai Mode of work: WFO Experience: 3 to 12 Years Required skills: Bachelor's in Engineering in any of the following disciplines - Mechanical / Manufacturing / Production / Industrial/Electrical Or any other Equivalent engineering degree. Experience: 4 to 8 years of working in... Heavy Engineering industries, Oil & Gas, Wind, Automobile, Aeronautical Industries and CADD Services / Consultancy. Minimum 1 year of hands-on experience in NDT (UT and VT) for Level 2 certified - ASNT / PCN / Equivalent Required good knowledge on Blades manufacturing process Ability to setup & use NDT (UT) equipment's and relevant analysis software Perform Hand & Machine UT Scan Proficient in Microsoft Office for reporting day to day developments Ability to work under pressure & get things done with quality Ability in being a good team player. Possess good analytical skills with methodological approach Fluent in English (Oral & Written)

Job NDT Inspector \u2013 Roles & responsibilities \uF0B7 NDT inspection \uF0B7 Part cleaning- pre cleaning & Post cleaning \uF0B7 Process control tests \uF0B7 Pre penetrant inspections \uF0B7 Quality documentations \uF0B7 Rework coordination \uF0B7 Quality clinic coordination for \u2013NDT rejections , rework analysis and corrective action \uF0B7 Final QC coordination for Quality issues \uF0B7 QCPC implementation \uF0B7 Review of customer acceptance criteria and prepare Work instruction \uF0B7 ASNT & NAS 410 Level 2 \u2013 training, experience log, Written and practical examinations, Vision examination & qualification requirements \uF0B7 Annual technical performance evaluations Work Experience Education BSc Chemistry / Physics Experience 0-1

Job NDT Inspector \u2013 Roles & responsibilities \uF0B7 NDT inspection \uF0B7 Part cleaning- pre cleaning & Post cleaning \uF0B7 Process control tests \uF0B7 Pre penetrant inspections \uF0B7 Quality documentations \uF0B7 Rework coordination \uF0B7 Quality clinic coordination for \u2013NDT rejections , rework analysis and corrective action \uF0B7 Final QC coordination for Quality issues \uF0B7 QCPC implementation \uF0B7 Review of customer acceptance criteria and prepare Work instruction \uF0B7 ASNT & NAS 410 Level 2 \u2013 training, experience log, Written and practical examinations, Vision examination & qualification requirements \uF0B7 Annual technical performance evaluations Work Experience EducationBSc Chemistry / Physics Experience0 to 1 year

NDT Level II - RT/UT/PT/MT is mandatory Experience in Pressure Vessel, Heat Exchanger, Structural Fabrication Inspection, Review WPS&PQR, Welding Knowledge, Piping, Machined Component, Valve, Flange, Material Inspection, Lube Oil System, Skid system