31 Metallurgical Lab Jobs

QC Engg-Metallurgy 1. Raw Material Evaluation & Selection 2. Quality Control & Testing 3. Product Development & R&D 4. Welding Procedure Devlop 5. Process Optimization 6. Documentation & Compliance B.E./B.Tech or M.Tech in Metallurgy Exp-9-15 yrs

What we are looking for Mission Statement/Objectives To process the steel in LRF-VD with safe practice to achieve the targeted production and required specification. Main Accountabilities Check the Equipment status before taking the heat by ensuring the correct parameters; ensure equipment availability by communicating with Electrical & instrumentation, Mechanical maintenance and VD-boiler for continuous production. Coordinating with BOF, CCM, Electrical & instrumentation, Mechanical maintenance and VD-boiler by Continuous communication for smooth operation of LRF/VD. Processing the heat in LRF/VD by adopting W/I and SOP to achieve the required specification/ quality of steel. Recording all the parameters in process log sheet for future reference. Performing supporting activities required for LRF/VD. Use all the mandatory PPEs and ensure the same from the entire subordinate to achieve ZERO accident. Report all unsafe act, near miss and Immanent dangerous situation. Deciding the material selection to control the cost of production. Planning, erection, commissioning of new Utility related project works. Comply with all safety, internal rules/regulations, follows proper adherence to PPE usage. Follow the guideline of Department requirements including shutdown related activities. And maintaining 5S as per the guideline. Assisting in Inventory, inspect, monitor, document and report the cost and performance of each piece of equipment and Budget control in ERP / SAP system.

Proficient in Surface Treatment process, Process Development & optimization, Material & process Analysis, Collaboration & Project Management, Documentation & compliance, Continuous Improvement. Required Candidate profile Raw material and heat treatment process expertise. Experience in Surface Treatment Processes like Anodizing, Plating

Role & responsibilities Working towards the achievement of established quality policy and quality objectives Control of records pertaining to Quality department Monitor and analyze the process conditions to improve the Quality efficiency achieve higher quality of Heat Treatment, Forging & Casting Testing Maintaining process and output parameters like temperature, cycle time, bath concentrations and hardness, strength, microstructure, etc. Knowledge of relationship between various process parameters like furnace temperature, pressure, carbon potential, gas flow for endothermic process, cycle time for heating during the heat treatment process, etc. Able to be dealing with Metallurgical lab inspection, All types of Row material Testing. Knowledge of Induction Hardening & Induction Softening Inspection Knowledge of methods used to test hardness of metals and the usage of hardness testing machines in laboratories Implementation and Adherence of Countermeasure for Customer Complaint and Audits. Should be able to work in ERP System and making presentation, knowledge of 5s, Kaizen and Poka-Yoke etc.. Experience is preferable in Forging and Machining industry. Preferred candidate profile Priority will be given to candidates from Gujarat Location, whether they are currently working in Gujarat or outside Gujarat. Ensuring maintenance of proper documentation for maintaining compliance with quality requirements in accordance with IATF 16949:2016, OHSAS18001 and ISO14001 Standard. Diploma / B.E. (Metallurgist) with 15 to 20 years of experience, minimum 05 years experience in relevant position.

About Us Tata Consulting Engineers Limited (TCE) is the largest Indian private sector engineering and project consultancy and an emerging global leader in integrated engineering solutions. With more than 60 years of engineering excellence, TCE has a presence in over 64 countries and over 12000 completed projects, the company operates in 3 core Industry segments -Infrastructure (Water, Environment, Urban Development, Buildings, Manufacturing Facilities, Ports and Harbours, Transportation), Power (Thermal, Hydro, Nuclear, Renewable, Transmission and Distribution) and Resources - Hydrocarbons and Chemicals (Oil, Gas and Refineries, Chemicals, Petrochemicals, Fertilizers, Speciality Chemicals, Pulp and Paper, Cement, Food, Pharmaceuticals and Beverages, Tyre, Glass) as well as Mining and Metallurgy (Mining, Geology, Beneficiation, Steel, Non-ferrous). TCE serves domestic as well as international markets and is known for several first-of-its-kind projects offering Engineering Studies, Design Engineering Services, Project Management Consultancy Services, OPEX and IIOT across all three verticals. A part of Tata Group - India’s most respected group, TCE is a 100 percent subsidiary of Tata Sons Limited Design your Future with us At TCE, you will experience a supportive environment that empowers you to excel, whether you are based in our offices or at a client site. We embrace diversity, equity, and inclusion, fostering a workplace where every individual can thrive by contributing their unique skills and perspectives to deliver exceptional results for our clients. Our comprehensive compensation and benefits packages are designed to meet the diverse needs of our employees and their families, complemented by a robust global well-being program. As a leading global infrastructure firm, we are committed to your growth and success, offering access to cutting-edge technology and impactful projects that offer flexibility and significant professional opportunities. Join us and become part of a global company that values your potential and supports your career development. Purpose & Scope of Position The Construction Engineer is responsible for overseeing and coordinating the project works contractors and maintaining the project performance goals. He coordinates work efforts and ensures activities are sequenced in accordance with the project schedule. A construction engineer must be a competent person in the construction business so that he accurately evaluates the methods and performance in all respects of the particular scope elements of the project for which he is accountable. Experience • Minimum 5 – 10 years of onsite experience on major projects under any sector – Infrastructure, Real Estate, Power, Steel or Chemical • Involvement in at least 2 significant major project similar in size and scope as delivered by TCE Qualification • Postgraduate or graduate in an engineering discipline • Post graduate degree/diploma in construction management (preferable) Key Responsibilities 1. Monitors overall job site health, safety and environment performance and verifies that contractors are protecting their workers at the job site. 2. Responsible for construction supervision and contract administration including supervision of contractors and their subcontractors for assigned portions of the project. 3. Assists in the coordination of the design deliverables to support continuous and efficient construction. 4. Job site point of contact for all contractors in his assigned area of the project. 5. Plans and chairs project safety meetings, assists with incident investigations and reporting, and participates in TCE safety programs and initiatives. 6. Communicates the identification, management and resolution of deficiencies and non-conformance to the Construction Manager. 7. Assists with construction estimating, scheduling, reporting, cost control, measurement verification and invoice certification for all work being performed by the contractor in his assigned area of the project. 8. To lead complete Bill Certification process, Measurement of Quantities, resolution of extra scope for assigned construction area or structure or domain or discipline. Enforce Change Management and Request for Information (RFI) management process 9. During absence of the Construction Manager, act as administrative spokesperson. 10. Assist with the development and review of construction related information for the purpose of proposals and other related business improvement activities. 11. Participate in and provide construction input for project constructability plans. 12. To provide inputs for daily, weekly and monthly progress reports, track contractor’s asking rates for major construction activities, to workout catch up plans suit to site conditions 13. Assist the Construction Manager to address site issues and developorimplement a remedy. 14. Assist in coordinating between constructions and commissioning and establishing an effective handover policy. 15. Ensures that Project safety plan and project quality plan is strictly implemented 16. Provides inputs for planning and billing activities Competencies

Role & responsibilities Assist Lab manager in Spectrometer analysis, along with raw material analysis including hardness and crack testing, Preferred candidate profile Degree in Chemistry having 1 to 2 years of experience in material testing or any other relevant expereince. Perks and benefits PF, ESI, Bonus etc.,

Inspect and verify the quality of raw materials (e.g., scrap metal, alloys) before they are used in the steel melting process. Ensure that all incoming materials meet the required specifications for the production of high-quality steel. Oversee the melting process in furnaces (electric arc furnaces, induction furnaces, etc.) to ensure proper temperature and alloy composition are maintained. Conduct real-time monitoring of parameters like temperature, pressure, and chemical composition to achieve the desired steel grade. Perform sampling of molten steel at various stages to analyze its chemical composition (e.g., carbon, manganese, sulfur, phosphorus content). Use spectrometry and other testing methods to verify that the steel meets the required specifications. Carry out mechanical tests such as tensile strength, yield strength, elongation, and hardness to determine the material properties of the steel. Analyze the results of mechanical tests to ensure steel quality and suitability for its intended use. Perform metallographic analysis to assess the microstructure of steel (grain size, phase composition, etc.) and identify any potential defects. Ensure that the steel’s microstructure aligns with the desired quality standards for strength, ductility, and other performance characteristics. Utilize various non-destructive testing methods such as ultrasonic testing, radiography, and magnetic particle testing to detect surface and internal defects in steel products. Collaborate with the production team to resolve any issues identified through NDT

M aterial testing lab and exposure to automotive parts of various material testing. Casting /Forging / steel /Rubber /Plastic parts – Physical / chemical analysis Hardness testing machines . Spectrometer testing , Microscopic analysis etc Required Candidate profile Diploma / Degree in metallurgy and experience of 3-5 years – in material testing lab and exposure to automotive parts of various material testing. Casting /Forging / steel /Rubber Plastic parts Perks and benefits Best in the industry

At TE, you will unleash your potential working with people from diverse backgrounds and industries to create a safer, sustainable and more connected world. Job Overview TE Connectivity's Manufacturing and Process Development Engineering Teams significantly impact LEANPD driven new product development projects, driving for excellence in existing manufacturing technologies and methods and striving to implement new manufacturing technologies to provide improved process and tolerance control. They act as the binding element between product development and manufacturing engineering, ensuring the effectiveness and efficiency of this critical interface. They support Product Development in the optimization of designs and piece parts for manufacturability by realizing sample tooling/products/prototypes. They also design, develop, and qualify tooling and processes to meet TE quality and production standards, document all processes and tooling in applicable TE systems, support supply chain to verify supplier compliance and capability, initiate and implement programs to continuously improve quality, cost and cycle time and adhere to all appropriate specifications, regulatory requirements and customer requirements. Responsibilities Complete prototype building and product testing in association with R&D Engineers. Complete process development to support new product development and implement manufacturing lines with the project teams. Conceptualize, source debug, and introduce new/improved Jig and Fixture designs. Preparation of Manufacturing Procedures & training of product builder personnel. Prepare and maintain Preventative Maintenance Schedules. Troubleshoot and repair line defective equipment. Ownership of line yield and output. Provide weekly updates and highlight yield issues and implement fixes to the team. Provide technical leadership and have the ability to motivate and influence production personnel. Display customer focus at all times and be accountable for quality and timeliness of own work. Compile IQ / OQ protocols and execution of same. Assist team in performing design testing. Fixture Maintenance /Calibration ownership for respective equipment. Basic understanding of QMS system. What your background should look like: Diploma in Mechanical /Production 2+ years experience in a similar role. Knowledge of Medical Device development/manufacture with previous work experience in Design an advantage. Jigs & Fixtures design and fabrication experience preferable. Experienced with all the popular software applications for generating office documents, spreadsheets, project plans, etc. Experience in execution of lab testing an advantagee.g. tensile testing, torque testing etc. Experienced in IQ/OQ/PPQ documentation preparation, execution. AutoCAD/Solid works experience preferable. Knowledge of Six-Sigma and Lean Engineering principles an advantage. Knowledge of equipment, process and product validation processes, ability with statistical data analysis. Dynamic, flexible approach to work with a results-oriented attitude. Comfortable operating within a team environment. Motivated to work on own initiative. Good communication and organisational skills. Proven track record of excellent timekeeping & attendance is essential. Basic Understanding of QMS Competencies

Role & responsibilities Metallurgical Quality Control : Mechanical Testing Mechanical Testing Lab compliance as per ISO 17025 Metallurgical Testing and Certification of finish products (viz. as forged, as finish machined) Ensure Control Plan Compliance for Testing of As Forged/As Heat Treated/ As Machined components. Calibration and AMC of Metallurgy Lab Equipments Monitor Sample preparation of parts for Metallurgical Testing such as valve bodies, connecting rods, Porsche crankshafts, portal axles, and Meritor knuckles. Primary analysis of failed mechanical testing results: Testing Lab NABL Documentation Metallurgical Sample preparation tracking to receive timely test results Material testing support for HT process establishment Coordinate third-party testing (ABS, Lloyds, IRCLASS, RINA). Mechanical Testing lab compliance for IATF and Customer Audit TPM/HSE Compliance, Initiate Kaizens, 5S, Safety related activities. Mechanical Testing (Tensile & Impact) support to Group companies. Close co-ordination with Machining Supplier for timely receipt of regular samples. Conduct yearly audit. Manpower Handling Experience on Forging/Heat Treatment processes is preferred Preferred candidate profile Metallurgy Lab Management Timely Testing of Components QMS IATF Systems / TPM methodology Manpower Handling Quick Learner QMS

Looking for challenging role If you really want to make a difference - make it with us Can we energize society and fight climate change at the same time At Siemens Energy, we can. Our technology is key, but our people make the difference. Brilliant minds innovate. They connect, create, and keep us on track towards changing the world’s energy systems. Their spirit fuels our mission. Our culture is defined by caring, agile, respectful, and accountable individuals. We value excellence of any kind. Sounds like you You will support a global organization responsible for metallic materials that are used in large turbine generator for the global energy market. Focus areas include reviewing material specifications from suppliers, providing metallurgical support for supply chain management, new apparatus and service production support and product definition. In this role, you will provide support to more experienced materials engineers and will have the opportunity to gain knowledge and experience in the performance requirements of materials used in large power generation products. You will also help support the qualification of new materials and suppliers of materials as well as provide technical guidance on material selections and substitutions. Your primary focus will be on metallic materials. Your new role – challenging and future- oriented Provide Metallurgical support for Supplier qualifications including reviews of suppliers, supplier documentations, and analysis of material substitution requests from suppliers. Support the implementation of metallic materials and related processes for use in electrical generator applications. Support the maintenance of material or process specifications and product drawings as needed. Support component designers in the selection of metallic materials for applications in electrical generators. Support evaluation and, or qualification of material suppliers. Support technical risk evaluation through Risk-Reviews and FMEA's. Communicate working results to line manager. Support department interfaces with internal partners. Prepare Engineering reports related to metallic materials performance. Perform data analysis on material properties to enhance product performance. Write and upgrade specifications for materials and related processes, ensuring compliance with industry standards. Conduct failure analyses and root cause investigations to drive continuous improvement in materials and processes. We don’t need superheroes, just super minds Must have a solid understanding of Materials Engineering with an emphasis on physical metallurgy with 4 - 8 years of experience working as a metallurgist related to industrial or energy related equipment. Project Management training and experience is a plus. Aptitude and interest in continuous improvement in product and process. Able to work independently and be self-directed. Easily able to work with colleagues and management. You must have a Bachelor’s degree or Master's degree in Materials Engineering, from reputed institute, with a concentration in physical metallurgy, and 5+ years of relevant experience. Willing to travel (approximately 20%). Strong verbal and written communication skills. Strong data analysis skills. Ability and willingness to work overtime and off-shift hours as needed to support emergent projects while working in either an office environment or in a factory environment. About the Team Gas Services Our Gas Services division offers Low-emission power generation through service and decarbonization. Zero or low emission power generation and all gas turbines under one roof, steam turbines and generators. Decarbonization opportunities through service offerings, modernization, and digitalization of the fleet. Check out this video to learn more about our Gas Service business https://www.siemens-energy.com/global/en/offerings/power-generation.html What’s it like to work at Siemens Energy https://bit.ly/3IfnlaR Who is Siemens Energy At Siemens Energy, we are more than just an energy technology company. We meet the growing energy demand across 90+ countries while ensuring our climate is protected. With more than 92,000 dedicated employees, we not only generate electricity for over 16% of the global community, but we’re also using our technology to help protect people and the environment. Our global team is committed to making sustainable, reliable, and affordable energy a reality by pushing the boundaries of what is possible. We uphold a 150-year legacy of innovation that encourages our search for people who will support our focus on decarbonization, new technologies, and energy transformation. Our Commitment to Diversity Lucky for us, we are not all the same. Through diversity we generate power. We run on inclusion and our combined creative energy is fueled by over 130 nationalities. Siemens Energy celebrates character – no matter what ethnic background, gender, age, religion, identity, or disability. We energize society, all of society, and we do not discriminate based on our differences. Rewards Career growth and development opportunities Supportive work culture Company paid Health and wellness benefits Paid Time Off and paid holidays 401K savings plan with company match Family building benefits Parental leave We’ve got quite a lot to offer. How about you This role is based at Site (Gurgaon). You’ll also get to visit other locations in India and beyond, so you’ll need to go where this journey takes you. In return, you’ll get the chance to work with teams impacting entire cities, countries – and the shape of things to come. We’re Siemens. A collection of over 379,000 minds building the future, one day at a time in over 200 countries. We're dedicated to equality, and we welcome applications that reflect the diversity of the communities we work in. All employment decisions at Siemens are based on qualifications, merit and business need. Bring your curiosity and imagination and help us shape tomorrow.

Shall be responsible for shift inspection of incoming, in-process, and final products as per the specifications, process sheet, and control plan. Must have experience in Metallurgy. Required Candidate profile Shall be responsible for arranging raw material and powder samples for external analysis. Shall be part of the cross-functional team for the new product development. Have experience in Metallurgy

Responsibilities: * Manage lab operations and maintenance/calibration of lab equipment * Oversee material/sample collection, preparation, sampling, testing , & metallurgical lab procedures * Ensure compliance with safety protocols *Admin Work Provident fund Annual bonus

Key Roles & responsibilities: A reputed Railway product manufacturer seek to hire an Operational Excellence Engineer within the Quality Assurance Team to participate in continuous improvement and efficiency projects, focusing on products, systems, operations and processes. Defines, designs, and implements process improvement as part of organizations Operational Excellence, supporting business in establishing "best practice". Responsible for the creating Quality assurance plans (QAPs) for Indian Railways, Inspection Test Plans (ITPs), Manufacturing Process Plans (MPP) Responsible for RDSO , RITES & Third Party inspection handling & documentations Responsible for the creating Quality documents (Both Export & Indian Market). Ensures integration and alignment both vertically and horizontally across organization, within areas of safety, quality, delivery, productivity, cost and process efficiency. Facilitate and coach improvement teams, establishes and maintain performance metrics to track program success. Lead in Lean health checks, apply Lean methodologies such as PDCA, and perform Lean program audits and streamlining processes. Implement standard work process/procedures, visual factory and error proofing mechanisms. Provide technical leadership on Operational Excellence/Lean systems and tools. Responsible for making SOPs and their implementations. Create, maintain and refine a Lean toolkit that can include 5S, Kaizen, quick change over, value stream mapping, mistake proofing and line balancing, Muda Walk, KANBAN, TEAMWOOD, SMED, POKA Yoke. Requirements: 1 to 3 years of exp. BE/BTech/Mtech in Mechanical/Industrial Engineering. Railways Industry experience with respect to inspection handling is preferred. Experience with Lean Manufacturing techniques, e.g. leading Kaizen events, Continuous improvement, Six Sigma, Process / Value stream mapping, FMEA, Fish Bone. Certified Six Sigma green belt will be preferred. Good understanding of industrial standards and risk management practices. Good technical capabilities, communication skills, teamwork abilities and initiative. Proficient in Microsoft Excel, Word, and PowerPoint

Analyze material performance,failure in metals and alloys under various operating conditions. Develop and improve metal production and processing techniques Select materials for product designs based on mechanical, thermal, and chemical properties.

Our reputed MNC Client is hiring for Metallurgy Engineer: Location: Chakan, Pune Shift: 1st, 2nd, 3rd Notice Period: 0-30 days (Plz don't apply if your notice period is more than 30 days) NOTE: 1 year Contract/ 3rd party payroll (Extendable on good performance) Job purpose Responsible for Metallurgical Lab activities in day-to-day inward material inspection, Reports preparations, NC Handling, Equipment monitoring. Duties and responsibilities Should handle Metallurgy Lab activity, incoming inspection. Should have knowledge of Hardness Testing like Rockwell, Brinell, Vickers etc. UTM Machine Testing Microscope, Stereoscope Handling Should have knowledge of various types of Heat Treatment Sample preparation for microscopic analysis Chemical Testing by Spectrometer Welding Penetration inspection MS office, ERP, Navision system IATF awareness 5S maintaining. Qualifications & specific requirement: Education : Diploma in Metallurgical Engineering Skills : Quality Lab Handling Warm Regards, Gayatri Kumari Email Id: gayatri@v3staffing.in V3 Staffing Solutions

OES operation UTM inspection Raw material tag generation

The candidate will perform lab tests, validate methods, analyze results, and generate reports. Strong knowledge of chemical analysis, lab safety, and documentation standards is essential for success in this R&D-focused role.

Knowledge of different types of heat treatment processes and associated equipment Familiar with different types of furnaces and process nuances for each type of heat treatment process Basic knowledge of the metallurgical properties of the material Required Candidate profile Knowledge in grinding burn evaluation by acid etch techniques. Knowledge of IATF 16949 & EMS 14001 & OHSAS 18001 DME /BE-Metallurgy, with 10 Years of experience in Engineering/, Automobile Industry

Forging, metallurgical process and metallurgical analysis,NABL17025:2017,Hardness, Cleanliness, and material compositions,Metallurgical testing and Metallography,Heat Treatment,Quality Management System, Hardness, Cleanliness, material compositions. Required Candidate profile Laboratory management, new product development of metallurgical process and metallurgical analysis of steel and Forging Components,NABL17025:2017,Hardness, Cleanliness,IATF 16949,QMS, calibration

Role & responsibilities Perform and oversee Heat Treatment processes (Hardening, Tempering, Carburizing, etc.) in the lab. - Conduct metallurgical testing (microstructure analysis, hardness testing, tensile testing, etc.) to ensure compliance with industry standards. - Analyze heat treatment defects and recommend corrective actions. - Maintain and calibrate lab equipment to ensure accuracy and reliability. - Prepare technical reports and documentation for heat treatment processes. - Ensure adherence to quality standards (ISO, IATF, CQi-9, etc.). - Collaborate with production and Quality teams to optimize Heat Treatment parameters. - Train junior technicians and support continuous improvement initiatives. Preferred candidate profile Diploma / Bachelors degree in Metallurgical/Materials Engineering or related field. - 3-6 years of experience in a Heat Treatment lab or Metallurgical Testing Environment. - Strong knowledge of heat treatment processes, Metallography, and material properties. - Proficiency in using microscopes, hardness testers, and other metallurgical equipment. - Good understanding of quality management systems (ISO 9001, IATF 16949). - Analytical mindset with strong problem-solving skills.

We are seeking a highly analytical and experienced Quality Engineer with 4 to 6 years of specialized experience in Diesel Engine Materials Engineering and Metallurgical Analysis. This critical role is instrumental in ensuring the highest standards of quality and integrity for our diesel engine components and systems. Your primary responsibilities will include conducting in-depth metallurgical analysis of raw materials, in-process components, and finished engine parts to assess their microstructure, mechanical properties, and compliance with specifications. You will be responsible for investigating material failures, root cause analysis of defects, and recommending corrective and preventive actions. This involves using a range of laboratory techniques such as microscopy (optical, SEM), hardness testing, tensile testing, impact testing, and spectroscopy. You will also develop and implement material quality control plans, inspect incoming materials, and manage supplier quality for critical engine components. A strong understanding of various materials used in diesel engines (e.g., cast iron, steel alloys, aluminum alloys) and their heat treatment processes is essential. You will collaborate closely with design, manufacturing, and R&D teams to provide material-related expertise, contribute to design for manufacturability and reliability, and improve overall product quality. Ensuring adherence to industry standards and internal quality procedures will be a key aspect of your role.

Metallurgist / Lab - HOD Should have knowledge of 1. Microstructure 2. Grainflow 3. Hardness 4. Magna Flux 5. CQI - 9 6. Eddy Current 7. steel chemical composition

Job description: Lab Engineer. Job Title Lab Engineer Educational Qualification. B.E / B Tech in Metallurgical engineering. Should have graduated from a reputed institute. Must have passed 12th class senior secondary examination in 1st class. Experience: Minimum 3 years Laboratory experience in a reputed firm. Should have experience in steel, heat treatment and forming operations. Should have worked on metallographic sample preparation, microscope. Should be conversant with national and international standards in chemistry. Should have basic computer knowledge. Participation in national / international seminars will be an added advantage. Responsibilities: Responsible for metallurgical testing as per customer requirement. Communicating and coordinating with the customer for critical requirements. To ensure that equipment's are periodically calibrated. To ensure that equipment's undergo preventive maintenance. To endure cleanliness and orderliness. To ensure adherence to safety (PP), & EHS requirements. participate and prepare for the Quality system and EHS audits. coordinating with service providers Viz suppliers, purchase etc. Reporting: Manager – metallurgy. Soft skills requirement: Should be a team player. Should work with integrity and honesty. Good analytical ability. Should be fluent in spoken and written English. Good presentation skills. Should keep himself abreast with the latest technological developments. Should be able to work independently. Should be able to provide technical support to SKF India plants. Contact : Sudina

Technical/Functional Knowledge and Skills required: 1. Metallurgical testing, validation & defect analysis of Aluminium die cast component GDC/HPDC/LPDC 2. Aluminium heat treatment & its optimization (T4, T5, T6 & T7) 3. Metallurgical testing, validation & defect analysis of Ferrous and non-ferrous alloys 4. Ferrous alloys heat treatment knowledge and experience 5. Metallography and microstructures of ferrous & non-ferrous metals 6. Mechanical testing & data Interpretation as per ASTM, JIS, ISO standards. 7. Knowledge of DFMEA, PFMEA, DVP, FTA, why-why analysis etc. 8. Knowledge of process optimization tools Like DOE, RCA, PDCA etc 9. Knowledge of destructive and non-destructive testing (MPI, DPT, X-ray) 10. Well versed with test standards international, customer standards 11. Excellent Communication skills Key Deliverables / Accountabilities of the Position: Roles & Responsibilities are as below 1. Metallurgical Failure analysis of components & investigation report writing with technical findings 2. Ability to work with team/CFT in product development teams to provide suggestions to ensure FTR product 3. To support design, development, quality, and other teams on material selection, characterization, testing & benchmarking 4. To perform complete material testing as and when required in coordination with both internal and external laboratory 5. VAVE initiative through alternative materials, life enhancement & quality improvement 6. Take care of all documentations in lab including (SOPs, check lists, 5S, Safety, Inventory checks etc.) 7. Good communication skills to present technical data, both in writing and orally, to cross functional team across organization. 8. Strong analytical skills and problem-solving ability Computer/ System knowledge & skills required: Knowledge of MS office and well acquainted with computer surfing Basic SAP, PLM will be added advantages Leadership skills Results orientation (30%) Innovative (30%) Team building (30%) Business acumen (10%)