15 Jncia Jobs

The ideal candidate for this position should be a male candidate willing to work in rotational shifts (24x7). The candidate must hold a minimum of a Graduation degree and possess 2-6 years of relevant experience along with maturity and a sense of ownership. The location of this role is Directiplex, Andheri East, Mumbai and it is an on-site position. A minimum communication score of 3.5 out of 5 is required for this role. The designation for this position is subject to change based on internal job family and parity within the organization. Additionally, a certification in JNCIA, CCNA, or CCNP is a mandatory requirement for this role. This is a full-time position with a schedule involving rotational shifts.,

You will be responsible for installing, configuring, maintaining, and troubleshooting network devices such as routers, switches, load balancers, and wireless Access Points (APs). It is mandatory to have knowledge of at least two technologies among SD-WAN, NSX, ISE, and Cisco ACI (Application Centric Infrastructure), as well as hands-on experience with at least three OEM technologies such as Cisco ACI, Array/Radware LB, VMware-NSX, Cisco Viptela SD-WAN, Fortinet SD-WAN, and Juniper Devices. A strong understanding of subnetting and experience with networking protocols like BGP, OSPF, and EIGRP are required. Basic knowledge of Linux OS is preferred. You should have experience with network monitoring and ticketing tools, possess good troubleshooting and problem-solving skills, and be able to analyze network traffic to identify potential threats and vulnerabilities. Experience in the BFSI sector will be advantageous, and experience working in Data Centre environments is preferred. Providing technical support to Application teams for joint issue resolution, proficiency in Standard Operating Procedure (SOP) preparation and documentation, configuring and installing new equipment in the network infrastructure, maintaining network services and security policies, implementing and enforcing acceptable user policies, monitoring and controlling user access to network resources, ensuring compliance with organizational standards and regulations, evaluating network designs, providing improvement recommendations, and developing and implementing disaster recovery plans are all part of the role. The required skills include holding a CCNA/CCNP/JNCIA or equivalent certification, with additional certifications in VMware and Load Balancers being an added advantage. Expertise in routing protocols, SD-WAN technologies, and OEM solutions, as well as experience in network security and compliance implementation, are essential. The educational qualification needed is a B.Tech / B.E. (IT) / BCA / MCA or equivalent. This position requires an experienced individual and is a permanent contract type within the Network Management department. The job was posted on March 11, 2025.,

As a Network Engineer, you will be responsible for installing, configuring, maintaining, and troubleshooting various network devices such as routers, switches, load balancers, and wireless APs. It is essential to have knowledge and hands-on experience with technologies like SD-WAN, NSX, ISE, Cisco ACI, and other OEM technologies like Array/Radware LB, VMware-NSX, etc. You should have a strong understanding of subnetting and be familiar with networking protocols such as BGP, OSPF, and EIGRP. Experience in the BFSI sector and working in Data Centre environments will be advantageous for this role. Your responsibilities will include providing technical support to Application teams, preparing SOPs and documentation, configuring new equipment, maintaining network services and security policies, and implementing acceptable user policies. Monitoring network traffic for potential threats, analyzing network designs, and developing disaster recovery plans are also part of your duties. To be successful in this role, you should hold certifications like CCNA, CCNP, JNCIA, or equivalent, with additional certifications in VMware and Load Balancers being beneficial. Expertise in routing protocols, SD-WAN technologies, OEM solutions, network security, and compliance implementation is required. Basic knowledge of Linux OS is preferred along with experience in network monitoring and ticketing tools. Your educational qualification should include a B.Tech / B.E. (IT) / BCA / MCA or equivalent degree. You are expected to have excellent troubleshooting and problem-solving skills, along with the ability to enforce user access control and ensure compliance with organizational standards and regulations. Your role will involve evaluating network designs and providing improvement recommendations while delivering technical support for issue resolution. This is a permanent position in the Network Management department, requiring an experienced professional with a proactive approach to network infrastructure management. If you are someone with a passion for network engineering and a desire to work in a dynamic environment, we encourage you to apply. Posted on: March 11, 2025,

Roles and responsibilities Responsible for design, implementation, configuration and support Juniper (MX, SRX, MIST) platforms. Oversee the Managed services for customers, ensuring that configurations are optimized. Schedule updates for customer services. Participate in meetings and reviews with customers, providing reports on the performance and projects. Perform troubleshooting and incident management for high-priority issues and ensure that they are resolved within the time frames set by service level agreements. Handle customer technical enquiries as well as service-related queries. Day to day configuration management and operations of firewalls, switches and WAN technologies. Support project manager with coordination of the final delivery/migration steps. Define and conduct service acceptance tests Chair the service activation/migration conference and drive change guideline/migration runbook and provide the service acceptance report Qualification: At least 8-10 years of experience in Information/Telecom technology Proven track record in producing, communicating and documenting successful technical customer solutions Working experience on enterprise customer projects: Network Solutions (Routing, Switching, Security, Wireless) Must demonstrate strong understanding of firewalls Architecture with hands on experience. Good to have Juniper certifications (JNCIA, JNCIS, JNCIE) Ability to work independently in critical Experience in Implementing Patches Strong troubleshooting and problem-solving skills Change Management/Project management skills Strong communication and Analytical skills Quality and process oriented

The Level 2 Network Engineering (Network Consultant) team is responsible for ensuring availability, performance, and security of the network infrastructure. As a member of the team, you have a direct impact on network infrastructure design and feature enhancements to keep our systems running smoothly. You are focused on creating engineering solutions to operations problems, optimizing existing systems, building infrastructure and eliminating work through automation. You also ensure that network operations are safe and efficient by monitoring network performance, coordinating planned maintenance, adjusting hardware components and responding to network connectivity issues. Our ideal candidate is highly autonomous, possesses effective written and verbal communication skills, a strong sense of ownership, adapts quickly to new technologies, and has high career growth potential. The desire and ability to work in a fast-paced, collaborative environment is essential. Essential Functions: Develop network architecture for a multi-tenant enterprise environment. Be responsible for the lifecycle of architecture from inception to working with engineering teams on implementation and supportability of design. Build reusable designs and systems that promote scale, reliability, security and efficiency. Manage and maintain multi-vendor, multi-protocol datacenter and backbone networks. Define and develop optimized network monitoring systems. Develop and maintain consistency within the networking infrastructure. Troubleshoot and remedy network related issues. Ability to participate in a regular on-call rotation. Analyze complex business problems and issues as it relates to enterprise network infrastructure. Provide technical guidance to IT professionals to correct issues encountered with network software & connectivity. Manage the needs of multiple customers, prioritize needs and manage the daily workload. Assist with internal projects as necessary, and work with project managers to set the scope and timelines of new projects to meet completion deadlines. Interface with all levels of employees internally and within client businesses to support engagement requirements (business owners, project managers, customer employees, and executive management). Write technical procedural documentation for co-workers and for delegated tasks. Required Education, Knowledge, and Experience: BS degree in Computer Science or related technical field involving systems engineering, or equivalent practical experience. 5+ years of experience working on a service provider or enterprise-level network in engineering or design capacity. Proven expertise with network hardware and software, preferably including Brocade, Cisco (IOS, NX-OS), Juniper JunOS, HPE, Fortinet etc. - CCNP certification required, JNCIA/JNCIS certification preferred. Strong understanding of wireless protocols with proven experience in Juniper Mist, Cisco WLC and Ruckus. A deep understanding of network protocols, including IP and related transports, BGP, EIGRP and OSPF. A deep understanding of network hardware internals, including forwarding, filtering, and policing mechanisms. A solid understanding of application protocols, including DNS, IPSEC, HTTPS, and TLS. Practical experience in network device firmware management in a large-scale enterprise environment. Experience developing network automation tools in at least one language (Python, Perl, C++, Bash, etc.). Experience with and understanding authentication mechanisms including PKI. Strong written and verbal communications skills. Abilities and Skills: Ability to adapt to a changing technical environment. Ability to coach other members of team in their area of expertise. Ability to communicate clearly with all team members and end-users. Ability to work with a sense of urgency. Self-directed and sufficient as there may be little to no daily supervision. Ability to analyze complex business systems and proprietary application configurations, document the configurations and processes, and support them as needed. Ability to prioritize and manage competing demands and tasks, and successfully manage multiple engagements that may require additional resources.

The Level 2 Network Engineering (network consultant) team is responsible for ensuring availability, performance, and security of the network infrastructure. you have a direct impact on network infrastructure design CCNA certificate & JNCIA exp

Mandatory: MPLS Engineer certified in either CCIE or JNCIA is mandatory for this position. Candidates who have only attended the CCIE or JNCIA training programs, or who have not yet completed the certification, are not eligible Required Candidate profile Implementation & Migration of MPLS networks with LDP/MPLS & ISIS interior routing protocols. Exp in protocols including ISIS, OSPF & BGP. Configuration,deploy designed network solutions at ISP Gateway

Key Responsibilities: Ensures that the assigned infrastructure at the client site is configured, installed, tested and operational. Ensures that any software that is part of the solution is installed and configured according to client requirements. Proactively identifies problems and errors as they occur and logs such incidents in a timely manner with the required level of detail. Liaises with all stakeholders including client IT environments, carriers and colleagues to expediate diagnosis of errors and problems and to identify a resolution. Investigates first line support calls assigned and identifies the root cause of incidents and problems following knowledge articles. Responds to and diagnoses all alerts, escalate to L2 Field Engineer when unable to resolve within the stipulated time. Ensures incidents are updated with progress and resolution details in a timely manner using the required platform. Ensures the efficient and comprehensive resolution of incidents and requests. Applies tools, techniques and processes to track, log, report on and correct configuration items, components and changes. Investigates problems in systems, processes and services and assists with the implementation of agreed remedies and preventative measures. Provide sfirst line remote and onsite technical support to clients. Provides first line field engineering services to clients. Reports and escalates issues to 3rd party vendors if necessary. Follows the required handover procedures for shift changes to ensure service continuity. Knowledge and Attributes: Good communicate skills, both verbal and written Ability to plan activities and projects well in advance, and take into account possible changing circumstances. Ability to maintain a positive outlook at work. Ability to work well in a pressurized environment. Ability to work hard and put in longer hours when it is necessary. Ability to apply active listening techniques such as paraphrasing the message to confirm understanding, probing for further relevant information and refraining from interrupting. Ability to adapt to changing circumstances. Ability to place client at the forefront of all interactions, understanding their requirements and creating a positive client experience throughout the total client journey. Academic Qualifications and Certifications: Bachelor's degree or equivalent in Information Technology or Computing or related field. Associate level certification in different Data Centre technologies such as Cisco, NetApp, EMC- Ex: CCNA (DC) etc. Associate level certification in different Networking technologies such as Cisco, Juniper, Aruba, F5, CCNA, JNCIA, ACMA etc. Collaboration certifications such as - Valid CCNA Certification required; Microsoft Voice certification (MS700 & MS720) advantageous; and Webex Calling certification advantageous. Required Experience: Entry level experience in Collaboration technologies such as Call managers, Voice Gateways, Call recording, Scripting, Messaging, VOIP, IP Telephony. Entry level experience in technical support to clients. Entry level experience in diagnosis and troubleshooting. Entry level experience providing remote support in Collaboration technologies. Entry level experience in relevant technology (Cisco and its product stack, SBC's such as AudioCodes and Oracle, CUBE's, Webex calling etc.). Entry level understanding of Network routing and switching.

How You'll Help Us Connect the World The Sr Technical Support Engineer (TSE) will be responsible for providing first level of Technical Support for various technologies in Ruckus Wireless products to our Enterprise customers. Required Qualifications for Consideration: Be the first technical point of contact for the customer Should possess the ability to handle critical (P1) cases soon after the training in Ruckus Products Demonstrate the ability to work with Escalation team and/or engineering teams to manage raised cases Work closely with SE teams internally on larger networks and more sophisticated issues Identify customer problems/issues and assist customer to resolve issues while consistently providing great Customer Experience Identify and reproduce customer technical problems in a test/lab environment Work on day-day tickets, follow-up with clients, provide feedback and see problems through to resolution Ensure proper case documentation and closure Generate clear and concise documentation in the form of case notes, technical tips and white papers Contribute to the knowledge base by creating KB articles Advise and discuss with Staff or Principal Engineers on calls and emails that require assistance. Timely handoff (critical issue) of cases that require sophisticated technical investigation by the LTE Team Manage customer expectation and make sure customer is receiving the highest quality of service Document customer issues for future reference and build knowledge base of the solutions given to the customer Actively participate in trainings and improve product and process knowledge Strict alignment to Service Level Agreement important metrics Understand the SLAs and work/align style of working towards meeting them KRAs include: CSAT, Active Backlog, Aged Backlog, Time to Resolve and Time to Close, Critical issue %, KB Contribution You Will Excited Us If You Have: Minimum of 4 years of customer support experience in IP networks, WiFi or related environment. Data networking is required, Wireless networking experience is desired. Preferably worked as an engineer TAC Excellent written and oral communication ability, including formal presentation skills to customers, partners, Ruckus accounts and support teams Good understanding and applied knowledge of TCP/IP, L3 routing, L2 switching, Multicast, firewalls, QOS Good understanding and solving skills with wireless technologies 802.11x, WLAN authentication, encryption, EAP, PSK, Radius, AAA, DNS Good understanding of RF transmission and antenna behavior Technical expertise in fixing and resolving sophisticated Layer 2/3 and/or wireless issues in multi-vendor environments Experience providing support to advise customers, resellers, and field personnel in resolving company product related issues Experience working in a support lab environment for problem replication Experience documenting the sequence of events related to resolving customer technical issues Proficient with analyzing data traces from protocol analyzers such as Wireshark Hands on experience on protocol analyzers tools such as Wireshark, Ethereal, Ruckus Wireless Products, Ethernet switching, Routing and Data Centers, Wi-Fi solutions, Multi-tenant solutions, Hotspot services, IOT solutions. Bachelor or diploma in a computer related field or equivalent work experience Experience considered favorably: Experience with Wireless survey tools like Ekahau Solid Understanding of Salesforce and JIRA. Multiple language skills Experience working with Linux Experience working in (or with) a vendor Relevant industry accreditations/certifications: CWNA, CCNA, CCNP, JNCIA, JNCIS Communication/work style: Excellent communication/interpersonal skills to clearly and simply articulate ideas, frame problems and offer solutions Strong interpersonal skills with a focus on customer satisfaction A belief in ownership Ability to drive for results and meet tight deadlines while maintaining a high level of accuracy and attention to details Must maintain a professional attitude, demeanor and be highly motivated and self-directed Encourages and accepts feedback Work Schedule: Monday through Friday or ‘staggered work week’, i.e. Sunday through Thursday or Tuesday through Saturday and weekend or overnight hours as required.

Responsibilities: * Design, implement, and maintain Juniper network infrastructure * Ensure high availability and performance through proactive monitoring and optimization * Configure and maintain customer network services on Juniper core equipment. Provident fund Health insurance

1. Should be a B. Tech / MCA / BE in any discipline or B. Sc (Specialization in Electronics or Telecom). 2. Should have be fluent in spoken English and Hindi. 3. Should have experience of at least 4 years in networking domain. 4. Should have certification of CCNA / JNCIA / ACNSP. 5. Engineer should have minimum 2-year post experience after completing CCNA / JNCIA / ACNSP. 6. Should have experience in managing proposed Switches/Routers. 7. Should have working experience in managing firewalls 8. Should have experience in network management in a data center in India. 9. Should be an Indian national. 10. Should have clean background verification report conducted by the bidder either by self or through third-party background verification agency

Minimum of 5+ (IP Integration Engineer) years of telecom experience in IP/MPLS /Nuage domain. Good knowledge of IP technical solutions - IPV4, IPV6, routing, switching, mpls Understanding of Service providers network operation Understanding of ip/mpls, services l2 vpn, l3 vpn , vll , wbx, leaf, spine etc. Hands-on in configuring routers/switches with Command Line Interface , Huwaei, Huwaei, Huwaei Cisco CCNA/CCNP of other vendors equivalent (e.g CCNA, JNCIA Huwaei) Knowledge of all or part of the set of protocols for IP/MPLSIGP, BGP, RSVP, LDP, etc and Mobile networks related interfaces and protocols 2G-3G-4G IP certifications in one or more suppliers (Nokia SRC, Huwaei, Juniper) are highly recommended, - Grade Specific Focus on Industrial Operations Engineering. Develops competency in own area of expertise. Shares expertise and provides guidance and support to others. Interprets clients needs. Completes own role independently or with minimum supervision. Identifies problems and relevant issues in straight forward situations and generates solutions. Contributes in teamwork and interacts with customers.

BE./B.Tech/MCA in Computer/IT / Electronics + 4 Years relevant experience in Network Management + OEM certified engineer on proposed networking equipment Such as JNCIA, CCNA or equivalent. Should be responsible for all activities at remote sites like installations, upgradations, migration, troubleshooting, performance tuning activities, reporting and patching etc for the equipments installed or being installed at new sites. Should be well versed in Switching, Routing and network equipment. Should have good troubleshooting skills. Should have good knowledge in monitoring network with tools (Cisco IOS, Junos, PRTG, Netflow, etc.) Should be able to configure and troubleshoot Layer2 protocols, such as: VLAN, Private VLANS, VTP, STP, DTP, Trunking, Stacking, Ethernet channel, DOT1Q, ISL, SVI etc. Should be able to configure IPSEC tunnel between locations. Should be able to configure and troubleshooting of Layer3 Protocols such as: BGP, EIGRP, OSPF, Static Routing, High Availability Protocols (HSRP, VRRP, GLBP), Floating Static Routing, Failover etc. Should provide support for IPv4, IPv6, NTP, ACLs, Route-map, Prefix-Lists, PBR, AAA, TACAS, RADIUS, CEF, IPv6 CEF, SLA, TRACK, SNMP, EEM, Syslog, Flow-export, RADIO, EVPN-VXLAN. Should be able Troubleshoot & isolate issues w.r.t MPLS links, IPSec Tunnels, Router cum firewalls. Router access control management. Fault management of routers and switches. Corrective actions to resolve faults to ensure high network uptime. Troubleshooting and debugging of problems. Deploy monitoring tools for identifying problem areas and early rectifications if require. Periodic fine-tuning to ensure optimal network availability Regular checking for proper functioning of network and assets deployed Should be well versed with EMS tools. Incident, Change and Configuration Management, IOS Upgradation, change request management. Support Network Specialist at DC/DR/Bandwidth Service provider Engineers w.r.t troubleshooting of issues of DC/DR with remote sites in liaison with other stakeholders

• Implementing scalable Juniper networks according to client specifications. • Installing and configuring networking hardware • Testing and troubleshooting installed Juniper systems. Contact No: 8527738652 Email: ritesh.seth@targustech.com

Network Consultant(L2 Network Engineer) Location : Hyderabad Shift : Rotational shift Work from Office Company Name: Bell Techlogix Strong Experience in switching, routing, wireless, and firewalls CCNP Certified Mandatory CCNA Juniper Mist is Mandate Essential Functions: Develop network architecture for a multi-tenant enterprise environment. Responsible for the lifecycle of architecture, from inception to working with engineering teams on implementation and supportability of design. Build reusable designs and systems that promote scale, reliability, security and efficiency. Manage and maintain multi-vendor, multi-protocol datacenter and backbone networks. Define and develop optimized network monitoring systems. Develop and maintain consistency within the networking infrastructure. Troubleshoot and remedy network-related issues. Ability to participate in a regular on-call rotation. Required Education, Knowledge, and Experience: BS degree in Computer Science or related technical field involving systems engineering, or equivalent practical experience. 5+ years of experience working on a service provider or enterprise-level network in an engineering or design capacity. A deep understanding of network protocols, including IP and related transports, BGP, EIGRP and OSPF. A deep understanding of network hardware internals, including forwarding, filtering, and policing mechanisms. A solid understanding of application protocols, including DNS, IPSEC, HTTPS, and TLS. Practical experience in network device firmware management in a large-scale enterprise environment Experience developing network automation tools in at least one language (Python, Perl, C++, Bash, etc.). Experience with and understanding of authentication mechanisms, including PKI. Proven expertise with network hardware and software, preferably including Cisco, Juniper, HPE, Fortinet etc. - CCNP certification required, JNCIA/JNCIS certification preferred. Strong understanding of wireless protocols with proven experience in Juniper Mist, Cisco WLC and Ruckus Strong written and verbal communication skills. Interested candidate should reach out to HR Ruchita 9136606172 ruchita.ulhalkar@enlink.com