2342 Hmi Jobs - Page 7

Responsibilities: Commission industrial automation systems on-site, including PLCs, SCADA, HMIs, and field instruments. Supervise on-site activities: panel installation, cable laying, terminations, and equipment setup. Perform I/O wiring verification and loop checks between PLCs and field devices. Download, configure, and validate PLC and HMI/SCADA programs as per project specifications. Execute interlock testing and logic validation as per functional design. Configure and test communication protocols such as Modbus RTU/TCP, Profibus, Profinet, and Ethernet/IP. Troubleshoot and resolve PLC/SCADA-related issues. Participate in Factory Acceptance Tests (FAT) and Site Acceptance Tests (SAT). Handle Control System AMC tasks: system inspections, preventive maintenance, and repairs. Prepare and maintain site documentation including commissioning reports, site work plan etc. Ensure compliance with safety regulations and quality standards during all commissioning activities. Must have Requirements: Degree in Electrical & Electronics, Electronics & Instrumentation, Electronics & Communication, Mechatronics or related field. Minimum 2–3 years of experience in commissioning of industrial automation/control systems. Proficiency in configuring, programming, and troubleshooting PLCs, HMIs, and SCADA systems. Experience with platforms like Schneider Electric, Rockwell Automation, Siemens etc. Experience in Process Industries shall be given preference. Good understanding of integrating field instruments (pressure, level, flow, temperature) with PLC/SCADA systems. Understanding of programming languages such as Ladder Logic (LD), Structured Text (ST), and Function Block Diagram (FBD). Experience with industrial communication protocols (Modbus RTU/TCP, Profibus, Profinet, Ethernet/IP). Ability to read and interpret GA drawings, Electrical wiring diagrams, SLD, and P&ID documents. Capability to perform loop checks, signal verifications, and calibrations during commissioning. Willingness to travel extensively and work at remote project locations. Strong problem-solving, documentation, and communication skills. Ability to work independently and collaboratively in cross-functional teams. Good to have Requirements: Knowledge of integrating PLCs with MCCs, PCCs, and electrical switchgear systems. Familiarity with IIoT protocols like MQTT, OPC UA, and REST APIs is a plus. Knowledge of communication media like Ethernet, RS232, RS485, and Fiber optics. Why Join CONSYST: Embark on an exciting journey with Consyst, where we prioritize the growth and collaboration of our team through: Talent Cultivation: We believe in nurturing your skills and providing opportunities for personal and professional development. Innovative Projects: Join us in contributing to cutting-edge projects that shape the future of Industrial Control and Automation. Dynamic Team Environment: Become a valued member of our dynamic and collaborative team, where your contributions are recognized and celebrated. If you’re ready to take the next step in your career and make a substantial impact, seize the moment, and apply today! Elevate your career with Consyst – where your potential meets limitless possibilities! Location: Nagpur, Maharashtra.

Location: Chennai, Tamil Nadu, India Job ID: R0099645 Date Posted: 2025-07-25 Company Name: HITACHI ENERGY TECHNOLOGY SERVICES PRIVATE LIMITED Profession (Job Category): Engineering & Science Job Schedule: Full time Remote: No Job Description: The opportunity: As a SCADA Engineer for Battery Energy Storage Systems (BESS), your mission is to design, configure, and maintain advanced SCADA solutions that enable secure, efficient, and reliable monitoring and control of BESS operations. You will develop HMI screens and uphold standards across web-based SCADA platforms to ensure seamless remote access and system visibility. How you’ll make an impact: Design and configure SCADA systems tailored for BESS applications. Develop HMI screens and dashboards for real-time monitoring and control. Integrate PLCs, RTUs, and IEDs using protocols such as Modbus, DNP3, and IEC 61850. Implement and maintain web-based SCADA platforms for remote access and control. Collaborate with electrical and software engineering teams to ensure seamless integration of SCADA with BESS hardware. Lead commissioning activities including functional testing, validation, and troubleshooting of SCADA systems on-site or remotely. Implement cybersecurity measures in line with industry standards and best practices. Ensure compliance with ISO/IEC standards and regulatory requirements for energy storage systems. Set up alarms, trends, and reports for performance monitoring and fault detection. Analyze system data to identify inefficiencies and recommend improvements. Utilize MicroSCADA tools for system configuration, diagnostics, and performance tuning. Stay updated with the latest SCADA technologies and tools relevant to BESS. Prepare technical documentation including system architecture, configuration manuals, and user guides. Provide training and support to operations and maintenance teams. Participate in cross-functional project meetings and contribute to planning and scheduling. Coordinate with vendors and clients to ensure timely delivery and quality assurance. Responsible to ensure compliance with applicable external and internal regulations, procedures, and guidelines. Living Hitachi Energy’s core values of safety and integrity, which means taking responsibility for your own actions while caring for your colleagues and the business. Your Background: Bachelor's degree in electrical engineering, Control Systems Engineering, Computer Science, or a related field. Should have 5-10 years of experience in SCADA system design, implementation, and commissioning, specifically within utility-scale solar and BESS generation facilities, substations, or industrial plants. Experience with SCADA platforms (e.g., Wonderware, Ignition, Siemens WinCC). Understanding of how SCADA interfaces with BMS (Battery Management System), EMS (Energy Management System), inverters, and converters. Proficiency in HTML, CSS, JavaScript , and frameworks like React , Angular , or Vue.js for HMI (Human-Machine Interface) development. Familiarity with Modbus , OPC UA , DNP3 , and IEC 61850 for device communication. Experience with MQTT or REST APIs for cloud-based SCADA systems. Knowledge of SQL and NoSQL databases for storing and retrieving SCADA data. Understanding of secure communication practices, encryption, and authentication for web-based SCADA systems. Qualified individuals with a disability may request a reasonable accommodation if you are unable or limited in your ability to use or access the Hitachi Energy career site as a result of your disability. You may request reasonable accommodations by completing a general inquiry form on our website. Please include your contact information and specific details about your required accommodation to support you during the job application process. This is solely for job seekers with disabilities requiring accessibility assistance or an accommodation in the job application process. Messages left for other purposes will not receive a response.

Company Description At Vickhardth Automation, we specialize in end-to-end industrial automation solutions, with a strong focus on PLC programming, SCADA & HMI development, and custom automation software. With over 15 years of experience, we have successfully executed projects across industries such as manufacturing, oil and gas, material handling, water treatment, automobile, and energy. Our mission is to help businesses improve efficiency, reduce downtime, and achieve seamless process control. Role Description This is a full-time on-site role for a PLC Programmer located in Kolhapur. The PLC Programmer will be responsible for designing, developing, and maintaining PLC programs for various automation projects. This role includes configuring and troubleshooting PLC systems, developing and implementing SCADA & HMI applications, conducting site visits for system upgrades and troubleshooting, and collaborating with the engineering team to deliver effective automation solutions. Qualifications Proficiency in PLC programming, SCADA & HMI development Experience in automation software design and custom solution development Strong analytical and troubleshooting skills Ability to conduct site visits and provide on-site support Excellent communication and teamwork skills Bachelor's degree in Electrical Engineering, Automation, or related field Knowledge of industry-specific standards and technologies Experience with various PLC platforms like Siemens, Allen Bradley, etc., is a plus

Job Objective: To design, develop, test, and commission industrial automation systems using PLCs, HMIs, and SCADA platforms, with a focus on Delta, Siemens, and Allen Bradley systems, aligning with Torqmotion’s client deliverables and project goals. Key Responsibilities: PLC Programming & Commissioning: Develop and troubleshoot PLC logic (Delta, Siemens, AB, etc.). Program HMI interfaces (Delta DOPSoft, Siemens WinCC, etc.). Commission PLC-based control systems on shop floor and client sites. Integrate sensors (Fotek, Sick, etc.) and motion controllers (Leadshine, Delta, Yaskawa). Electrical Panel Support: Collaborate with panel design and fabrication teams. Provide I/O mapping, electrical schematics review, and cable routing diagrams. Ensure compliance with safety and wiring standards. Field Support & Service: Visit client sites for installation, testing, and breakdown support. Document service visits and generate technical service reports. Documentation & SOPs: Prepare BOM, panel GA drawings (if trained). Develop user manuals and SOPs for control systems. Maintain version control for program backups and updates. Team Coordination: Support internal teams and trainees during training sessions. Liaise with sales and project management teams for feasibility checks. Key Skills Required: Strong hands-on experience in PLC programming (especially Delta DVP series). HMI design and integration experience. Good understanding of industrial electrical standards. Ability to read and interpret electrical drawings. Knowledge of VFDs, servo systems, SMPS, and SCADA is a plus. Willingness to travel for on-site support. Qualifications & Experience:Diploma / B.E. / B.Tech in Electrical, Electronics, or Instrumentation. 1–2 years of relevant hands-on PLC experience. Fresher with strong WPLSoft / DOPSoft skills can also be considered for junior role or trainee position.

You should have knowledge in Allen Bradley, Siemens PLC and HMI, SCADA programming, and commissioning hands-on. It is required to have a minimum of 2 years of work experience.,

Sofcon is a brand that serves as a bridge in closing the skill gap between the industry and academia. It is a workplace that fosters inspiration for innovation, learning, and creativity. If you are seeking to join Team Sofcon, which operates skill development programs in 5 states including Noida, Delhi, Faridabad, Ahmedabad, Baroda, and Pune, and possess experience in the following areas: - Automation: Proficiency in PLCs, SCADA Design, HMI, VFD, DCS, Motion Control, Field Instrumentation & Controls, Industrial Network & Data Communication. If you meet the above criteria and are enthusiastic about contributing to a dynamic work environment, we encourage you to send your CV/Resume to hr@sofcontraining.com.,

As a Senior Engineer - Electrical at Barry-Wehmiller, you will be responsible for developing electrical designs, drawings, and Bill of Materials for industrial machineries and equipment such as Printing, Packaging, and Paper machineries. You will actively participate in concept, detail design, production, testing, safety, installation, commissioning, and troubleshooting reviews with customers. To be successful in this role, you should hold a Bachelor's degree in Electrical Engineering and have a minimum of five years of experience in Industrial Machineries/Equipment and discrete product machineries. Experience in Printing and Packaging Machines OEM is preferable. Your technical skills will be put to use in various areas including calculation and selection of PLC, Drives, HMI, AC Load calculations, low voltage switchgear systems, and electrical components based on application & design standards. Hands-on experience in preparation of diagrams, panel drawings, electrical schematics, and wiring diagrams using design software like Promise, AdeptE, and AutoCAD is desired, preferably in Printing and Packaging Machines. Knowledge of standards such as UL508A, ANSI, IEC, and experience with B&R, Allen Bradley PLC, Servo drives, HMI, and Yaskawa Drives would be advantageous. You will be involved in the replacement of obsolete electrical parts while maintaining the existing design standards of the machines. Additionally, familiarity with industrial control and protection schemes, motor controls, electrical systems, and materials used in electrical machines is essential. Your role will also include creating and updating functional specifications, assembly & installation instructions of machines. At Barry-Wehmiller, we value autonomy, ownership, and flexibility, allowing you to drive features end-to-end, influence product decisions, and make a visible difference with your work. You will have the opportunity to collaborate with smart, passionate peers and continuously grow your skills in a culture that supports personal and professional development. If you resonate with our people-first philosophy and are excited about working on impactful projects with bright minds in the industry, we encourage you to apply. Watch this video by our CEO, Mr. Bob Chapman, on Truly Human Leadership to learn more about our culture. At Barry-Wehmiller, we celebrate diversity and encourage individuals from all backgrounds to apply, as we believe that our differences lead to innovation, excellence, and meaningful work. Let us know if you require any reasonable accommodations during the interview process. Join us at Barry-Wehmiller, a global team dedicated to using the power of business to build a better world.,

At Trane TechnologiesTM and through our businesses including Trane and Thermo King, we create innovative climate solutions for buildings, homes, and transportation that challenge what's possible for a sustainable world. We are a team that dares to look at the world's challenges and see impactful possibilities. We believe in a better future when we uplift others and enable our people to thrive at work and at home. We boldly go. Be a part of our mission! As a world leader in creating comfortable, sustainable, and efficient environments, it is our responsibility to put the planet first. Sustainability is not just how we do business at Trane Technologies; it is our business. If you dare to look at the world's challenges and see impactful possibilities and want to contribute to making a better future, we invite you to consider joining us in boldly challenging what's possible for a sustainable world. Trane Technologies is excited to announce an incredible opportunity for a talented professional to join our team as an Engineering Leader - Manufacturing Automation & Engineering. In this pivotal role, you will lead the development and implementation of cutting-edge manufacturing technologies and automation solutions. Collaborating closely with cross-functional teams, you will drive innovation, enhance productivity, and ensure the highest quality standards in our manufacturing processes. Your work will have a significant impact on our company's initiatives and contribute to our mission of creating a sustainable world. Inclusive Wellbeing Program, with resources to support you and your family's physical, social, emotional, and financial well-being. Comprehensive learning and development solutions, including Higher education/Certification reimbursement. Sense of belonging & community through our Employee Resource Groups that foster our culture of inclusion. Volunteerism: 8 hours of paid time off per calendar year to volunteer with non-profit charitable organizations. The Trane Technologies Helping Hands Fund to support employees facing financial challenges due to unforeseen personal hardship. Location: Bangalore Work Arrangement- Hybrid: This position has been designated as a Hybrid work schedule with work performed onsite 3 days each week. In this role, you will lead the Manufacturing Automation Organization and will be primarily engaged in driving architecture design and development of Manufacturing Test systems for Global plants, including End-of-line systems and Automated Test equipment systems designing and reviewing Automation architecture & solutions. You will lead the team to deliver complex automation projects to global plants to improve quality, productivity, and safety. Establish Manufacturing KPIs and scorecards through digital platforms, contribute towards Organization long-range plan of pursuing advancements in Manufacturing Automation and Engineering capabilities globally, implement Operational Technologies (level 0 to level 3) in plants and ensure a good understanding of Plant Information Technologies & tools (level 4 to level 6). Drive Industry 4.0 technology projects, manage the technology lifecycle, engage in business development, oversee capacity planning, recruitment, training, and development initiatives. Requirements: - 20+ years experience in the field of Industrial Automation & Digitalization and must have experience in leading the team to implement larger digitalization projects at plants - Expertise in Industrial Automation tools, electrical & controls design, PLC/HMI/SCADA programming, network protocols, and safety standards - Competence in Industry 4.0 technologies, Plant modeling & simulation, Process engineering, and Productivity & Quality enhancements - Proven track record in designing automation solutions, including Robotics, Vision systems, and Material handling - Strong knowledge in discrete manufacturing and cross-functional team collaboration - Extensive experience in Manufacturing Test systems architecture and development - Educational Qualification: Bachelors or Masters degree, preferably in Electrical & Electronics Engineering, Mechatronics, or Manufacturing Engineering Career Break: We have a Relaunch Program for professionals looking to restart their careers after a break of at least 12 months. If you match the work experience requirements and have had a career break, you are welcome to apply.,

Description Taking care of overall Facility & Admin activities. Daily, Weekly, Monthly technical check per PPM schedule. This position will be responsible for maintenance & troubleshooting on conveyors involving automation, such as PLC, SCADA, HMI, VFD, field sensors, sortation systems and control cabinets. Attending TT calls for corrective maintenance, service and repair works Co-ordinate with vendor for systems under warranty/AMC. DG maintenance. Ability to install, maintain, and troubleshoot power distribution systems, branch circuits, lighting systems, transformers, and wiring methods and material. Ability to install, maintain, and troubleshoot relay logic, ladder diagrams, control components-- photo eyes, motor starters, relays, limit switches, proximity sensors, timers, solenoids, Servo drives, frequency inverters, linear drives, tacks, and encoders. Dedicated to supporting production by working in a safe, customer focused manner. Minor refurbishment and upgrade work for building finishes, fixtures, fittings and equipment, fixed furniture and OPS equipment like Trolley, Cages, Carts Fire Alarm & Fire extinguishers regular checks. Maintenance, oiling, greasing of carts, trolleys, pump, rolling shutters. Attending regular Electrical works Height work, hot work permit to issue. Minor Civil & Plumbing Corrective maintenance calls. Provide daily reports on TT closures & open cases & RCA. Taking care of Soft services activities i.e. Pest control, Housekeeping, Scrap & Garbage disposal. Handling agency staff & overall shift. Key job responsibilities Taking care of overall Facility & Admin activities. Daily, Weekly, Monthly technical check per PPM schedule. This position will be responsible for maintenance & troubleshooting on conveyors involving automation, such as PLC, SCADA, HMI, VFD, field sensors, sortation systems and control cabinets. Attending TT calls for corrective maintenance, service and repair works Co-ordinate with vendor for systems under warranty/AMC. DG maintenance. Ability to install, maintain, and troubleshoot power distribution systems, branch circuits, lighting systems, transformers, and wiring methods and material. Ability to install, maintain, and troubleshoot relay logic, ladder diagrams, control components-- photo eyes, motor starters, relays, limit switches, proximity sensors, timers, solenoids, Servo drives, frequency inverters, linear drives, tacks, and encoders. Dedicated to supporting production by working in a safe, customer focused manner. Minor refurbishment and upgrade work for building finishes, fixtures, fittings and equipment, fixed furniture and OPS equipment like Trolley, Cages, Carts Fire Alarm & Fire extinguishers regular checks. Maintenance, oiling, greasing of carts, trolleys, pump, rolling shutters. Attending regular Electrical works Height work, hot work permit to issue. Minor Civil & Plumbing Corrective maintenance calls. Provide daily reports on TT closures & open cases & RCA. Taking care of Soft services activities i.e. Pest control, Housekeeping, Scrap & Garbage disposal. Handling agency staff & overall shift. About The Team To be the most innovative and agile team which sets benchmark for safety, reliability and maintenance engineering, is recognized for sustainability initiatives, YoY cost optimization and people inclusivity with North star goal of being BAA in RME across geographies by 2030. Basic Qualifications Diploma/Degree in Electrical/ Electronics, Controls & instrumentation with necessary experience of minimum 2 years Preferred Qualifications Diploma/ Degree in Electrical/ Electronics, Controls & instrumentation with necessary experience of minimum 2 years Our inclusive culture empowers Amazonians to deliver the best results for our customers. If you have a disability and need a workplace accommodation or adjustment during the application and hiring process, including support for the interview or onboarding process, please visit https://amazon.jobs/content/en/how-we-hire/accommodations for more information. If the country/region you’re applying in isn’t listed, please contact your Recruiting Partner. Company - ASSPL - Maharashtra - C32 Job ID: A3042424

Should have experience in Siemens/ Rockwell ecosystem. Assisting project teams in implantation of automation architecture. This may involve travel to factory and site location. Ability to troubleshoot software problems will be an added advantage

Description As part of Cummins’ skilled trades training program, the Maintenance Apprentice will support site Electricians in maintaining and improving manufacturing equipment and systems. This role involves hands-on learning in a manufacturing environment, focusing on electrical, automation, and mechanical systems. The apprentice will complete formal coursework and on-the-job training hours, gaining experience in troubleshooting, preventive maintenance, and continuous improvement initiatives. Key Responsibilities: Health, Safety & Environment (HSE): Stop work and report any major injury hazards immediately. Comply with all HSE standards, policies, and regulations. Use appropriate personal protective equipment (PPE). Participate in HSE training and promote a culture of safety and environmental responsibility. Quality & Maintenance Support equipment uptime and perform downtime failure analysis. Perform supervised maintenance tasks using diagrams, manuals, and testing instruments. Provide feedback for preventive maintenance systems. Conduct quality inspections and follow all process documentation. Operations & Delivery Attend required classes and complete on-the-job training hours. Assist in preventive, corrective, and predictive maintenance activities. Maintain a clean and organized work area. Identify and reduce manufacturing constraints and participate in process improvements. Teamwork & Communication Communicate effectively with team members and support teams. Participate in Total Productive Maintenance (TPM) initiatives. Engage in personal development aligned with business needs. Responsibilities Qualifications: High school diploma or equivalent. Enrollment in or completion of a formal skilled trades training program. This position may require licensing for compliance with export controls or sanctions regulations. Competencies Collaborates: Works effectively with others to meet shared goals. Communicates Effectively: Tailors communication to different audiences. Customer Focus: Builds strong relationships and delivers customer-centric solutions. Nimble Learning: Learns quickly through experimentation and feedback. Self-Development: Seeks growth through formal and informal channels. Values Differences: Embraces diverse perspectives and cultures. Technical Competencies Health and Safety Fundamentals Controls Safety (Electrical, Hydraulic, Pneumatic) Electrical System Troubleshooting Factory Automation and Control Systems Machine Programming Manufacturing Knowledge Qualifications Skills and Experience: Required Basic knowledge of PLC & HMI programming (TIA Portal/Simatic Manager). Understanding of data traceability systems using RFID and CMES. Troubleshooting experience with non-runners, ATEQ leak testing systems, servo motors, conveyor systems, robots, and cobots. Familiarity with pneumatics, hydraulics, and mechanical assemblies. Preferred Hands-on experience in precision manufacturing assembly lines with laser welding stations, functional testing stations, robots, and cobots.

Job Description Role Brakes Application Engineer Educational Qualification Graduate– Mechanical or Mechatronics Engineer or Automobile Engineer Experience 3-5 years Band SRE Primary Skills Experienced with Brakes & ADAS functions tuning/calibration/development Knowledge in brakes system like ABS, ESC/ESP, IEB, and 2 box system. Good understanding on slip control & strategies Experienced in customer joint test & sign off. Test Track experience with development of brake system with excellent driving skills. Acquainted with Data acquisition and analysis tools. Good Understanding of vehicle dynamics physics and brakes system. Enthusiasm and passion to drive & develop the various segment of vehicle. Secondary Skills Performed Vehicle instrumentation. Analyze test data and document results and provide technical feedback. Hands on experience with vehicle diagnostic, Vector tools & other CAN tools. Strong problem-solving ability and good communication & coordination skills Good understanding of test methodology & brakes regulatory requirements. Experienced in winter testing. Understanding on automotive sensors & actuators. Responsibility Analyze brake system status and improve parameter by conducting vehicle level tuning & trials for new and current vehicles Benchmark vehicle testing & performance evaluation for brake system Perform the verification of new software algorithms on vehicle level Operate vehicle at proving grounds, test tracks & public roads. Support & coordinate for the field & in plant issues reported for the brake’s system/functions. Location MTCI - Hyderabad Employment Type Full Time No of Position 1 Request Date 17/07/2025 Resource Required Date Immediate Division Name Chassis & Safety Team Name Chassis Control Design L1 Panel Name Mr. Joseph Jackson 2. Mr. Gaurav 3. Mr. Park Joon Soo

1. Read and interpret P&IDs and EPLAN electrical diagrams 2. Select appropriate PLCs, HMIs, and I/O modules 3. Design, develop, and install PLC programs 4. Test and troubleshoot automation systems 5. Installation and commissioning of PLC and HMI systems 6. Analyze and understand electrical and mechanical schematics Qualifications: Bachelor s degree in electrical, Mechanical, Software Engineering, or a related field. Apply for this position Allowed Type(s): .pdf, .doc, .docx By using this form you agree with the storage and handling of your data by this website. *

Profile Summary: We are looking for a seasoned Control Manager with extensive experience in SPM (Special Purpose Machine) design , industrial automation, and advanced PLC programming. The ideal candidate must have successfully led a team and delivered over 30+ automation projects , primarily using Mitsubishi, Allen-Bradley, and Siemens PLCs . This role demands a deep understanding of electrical control systems, HMI/SCADA integration, and the ability to deliver end-to-end automation solutions. Key Responsibilities: Lead a team of control engineers in designing and delivering automation solutions for SPM machinery. Develop and review electrical schematics , control panel designs , and I/O layouts . Program, test, and debug PLCs (Mitsubishi, Allen-Bradley, Siemens) for new and retrofit SPM projects. Integrate HMI and SCADA systems with real-time industrial communication protocols. Ensure smooth commissioning and installation of automation systems at client sites. Analyze client requirements and design complete industrial automation solutions tailored for special-purpose machines. Provide technical direction and mentoring to junior engineers. Collaborate with mechanical and electrical teams to ensure seamless system integration. Lead troubleshooting, debugging, and support of live automation systems. Prepare and maintain documentation , project schedules, and compliance reports. Ensure projects are delivered within time, cost, and quality standards . Key Skills & Technical Proficiency: Expertise in PLC Programming : Mitsubishi (GX Works, FX series) Allen-Bradley (RSLogix 5000, Studio 5000) Siemens (TIA Portal, S7 series) HMI & SCADA systems: WinCC, FactoryTalk, GT Designer, etc. Field communication protocols: Modbus, Profibus, Ethernet/IP, OPC . Hands-on experience in industrial sensors, drives (VFDs, servos), actuators , etc. Strong grounding in electrical control panel design & troubleshooting . Knowledge of AutoCAD Electrical / EPLAN is preferred. Experience: Minimum 10-15 years in industrial automation and SPM machine design. Must have successfully led and delivered 30+ projects . Experience across multiple industrial domains like automotive, packaging, robotics, textile, or precision engineering preferred.

Design and develop electrical systems and control circuits for foundry equipment and infrastructure. Plan and execute electrical projects – power distribution, panels, MCCs, VFDs, automation, and PLC integration.

Description Job Summary: As part of Cummins’ skilled trades training program, the Maintenance Apprentice will support site Electricians in maintaining and improving manufacturing equipment and systems. This role involves hands-on learning in a manufacturing environment, focusing on electrical, automation, and mechanical systems. The apprentice will complete formal coursework and on-the-job training hours, gaining experience in troubleshooting, preventive maintenance, and continuous improvement initiatives. Key Responsibilities: Health, Safety & Environment (HSE): Stop work and report any major injury hazards immediately. Comply with all HSE standards, policies, and regulations. Use appropriate personal protective equipment (PPE). Participate in HSE training and promote a culture of safety and environmental responsibility. Quality & Maintenance Support equipment uptime and perform downtime failure analysis. Perform supervised maintenance tasks using diagrams, manuals, and testing instruments. Provide feedback for preventive maintenance systems. Conduct quality inspections and follow all process documentation. Operations & Delivery Attend required classes and complete on-the-job training hours. Assist in preventive, corrective, and predictive maintenance activities. Maintain a clean and organized work area. Identify and reduce manufacturing constraints and participate in process improvements. Teamwork & Communication Communicate effectively with team members and support teams. Participate in Total Productive Maintenance (TPM) initiatives. Engage in personal development aligned with business needs. Responsibilities Qualifications: High school diploma or equivalent. Enrollment in or completion of a formal skilled trades training program. This position may require licensing for compliance with export controls or sanctions regulations. Competencies Collaborates: Works effectively with others to meet shared goals. Communicates Effectively: Tailors communication to different audiences. Customer Focus: Builds strong relationships and delivers customer-centric solutions. Nimble Learning: Learns quickly through experimentation and feedback. Self-Development: Seeks growth through formal and informal channels. Values Differences: Embraces diverse perspectives and cultures. Technical Competencies Health and Safety Fundamentals Controls Safety (Electrical, Hydraulic, Pneumatic) Electrical System Troubleshooting Factory Automation and Control Systems Machine Programming Manufacturing Knowledge Qualifications Skills and Experience: Required Basic knowledge of PLC & HMI programming (TIA Portal/Simatic Manager). Understanding of data traceability systems using RFID and CMES. Troubleshooting experience with non-runners, ATEQ leak testing systems, servo motors, conveyor systems, robots, and cobots. Familiarity with pneumatics, hydraulics, and mechanical assemblies. Preferred Hands-on experience in precision manufacturing assembly lines with laser welding stations, functional testing stations, robots, and cobots. Job Manufacturing Organization Cummins Inc. Role Category On-site Job Type Shop ReqID 2416299 Relocation Package Yes

A PLC (Programmable Logic Controller) Programmer designs, develops, and maintains systems that automate industrial processes using PLCs. They are responsible for writing and testing PLC programs, troubleshooting issues, and optimizing system performance. This involves understanding client requirements, creating control logic, configuring hardware, and ensuring systems operate efficiently and safely. Key Responsibilities: Design and Development: Creating PLC programs based on client specifications, including control logic and HMI (Human Machine Interface) development. Programming and Testing: Writing and debugging PLC code using various programming languages (e.g., Ladder Logic, Structured Text) and testing programs using automation equipment. Troubleshooting and Maintenance: Diagnosing and resolving issues in PLC systems, ensuring optimal performance and minimizing downtime. System Integration: Working with cross-functional teams (e.g., mechanical, electrical, and process engineers) to integrate PLC systems into larger automation processes. Documentation and Training: Creating documentation for PLC programs and providing training to technicians and other team members. Project Management: Planning, scheduling, and executing projects related to PLC programming, ensuring timely and efficient implementation. Essential Skills: Technical Skills: Strong understanding of PLC programming languages, electrical and mechanical principles, and automation software. Problem-Solving: Ability to analyze and resolve complex issues in PLC systems. Communication Skills: Effective communication with clients, colleagues, and other stakeholders. Organizational Skills: Ability to manage multiple tasks, prioritize work, and meet deadlines. Safety Knowledge: Understanding of safety regulations and guidelines related to PLC systems and industrial processes. Education and Experience: A bachelor's degree in engineering (Mechanical, Electrical, or related field) is often required. Experience in PLC programming, automation, or a related field is highly valued. Relevant certifications (e.g., ISA CSST) can be beneficial. In essence, a PLC Programmer is a crucial part of industrial automation, ensuring the efficient and reliable operation of manufacturing processes and other automated systems Contact - 9310699721 Job Type: Full-time Pay: ₹30,000.00 - ₹50,000.00 per month Schedule: Day shift Work Location: In person

Dear All Greetings of the day!! Kahan Controls is hiring Marketing Engineer @ Delhi location. followings details are mentioned - Sales experience in HVAC and Refrigerator controllers and Automation like, : "Variable Frequency and Drive, HMI, Temperature microcontroller, Scada PLC, BMS, IOT, Transmitter. Desire Profile: Male candidate Experience - 1 to 3 years (No fresher) Qualification – B.E-EEE, ECE, E&I, Mechtronics. Location – Delhi Please note - Should have experience in Industrial Automation products. Interested candidates can share resume on jobs@kahancontrols.com Job Types: Full-time, Permanent Pay: ₹20,000.00 - ₹35,000.00 per month

Job Title: Electrical Engineer - Production & Service Location: Ahmedabad, Gujarat Experience Required: 1 to 5 years Industry: Industrial Automation / Electrical Panels / Machinery / Manufacturing Key Responsibilities: Electrical panel wiring, assembly, and testing PLC/HMI programming and integration Installation and commissioning of machines at client sites Preventive and breakdown maintenance support Production coordination and quality control Technical documentation and daily reporting Requirements: Diploma or Degree in Electrical, Electronics, or Mechatronics Engineering Practical knowledge of PLCs, drives, and control systems Strong problem-solving and communication skills Willingness to travel for site visits and client support Job Timing: Day Shift Salary Range: ₹25,000 to ₹35,000 (commensurate with experience) Job Types: Full-time, Permanent Pay: ₹25,000.00 - ₹35,000.00 per month Benefits: Commuter assistance Food provided Health insurance Leave encashment Provident Fund Schedule: Day shift Supplemental Pay: Overtime pay Yearly bonus Education: Diploma (Preferred) Experience: Electrical production: 1 year (Preferred) Location: Naroda, Ahmedabad, Gujarat (Preferred)

We are looking for a passionate and skilled Project Engineer with hands-on experience in Siemens automation systems (TIA Portal, S7-1200/1500, WinCC, etc.) to join our dynamic engineering team. This is a great opportunity to work on cutting-edge industrial automation projects and be part of a forward-thinking company driving digital transformation in manufacturing and industrial operations. Key Responsibilities: Lead and execute industrial automation projects using Siemens PLC/SCADA systems. Design and develop control logic and HMI applications using TIA Portal, Step 7, WinCC, etc. Collaborate with clients and internal teams to understand project requirements and deliver on-time solutions. Perform FAT, commissioning, and troubleshooting at site (if required). Prepare and maintain technical documentation, reports, and training materials. Ensure adherence to quality, safety, and industry standards. Required Skills & Qualifications: Diploma/Degree in Electrical/Electronics/Instrumentation/Automation Engineering. 3 to 6 years of proven experience in Siemens-based automation projects. Proficient in TIA Portal, S7-1200/1500, WinCC, Step 7, Profibus/Profinet. Strong knowledge of electrical drawings and panel integration. Experience in handling onsite commissioning and customer interaction. Good analytical, communication, and problem-solving skills. Nice to Have: Exposure to Siemens drives (VFDs/Servo) integration. Experience with other brands (Allen Bradley, Schneider, etc.) Familiarity with Industry 4.0 concepts and communication protocols (Modbus, OPC UA, MQTT). Why Join Us? Work with a passionate and innovative team. Opportunity to lead challenging and diverse automation projects. Competitive salary and performance-based incentives. Career growth and training opportunities. Job Types: Full-time, Permanent Pay: ₹30,000.00 - ₹70,000.00 per month Benefits: Cell phone reimbursement Leave encashment Paid sick time Paid time off Provident Fund Schedule: Day shift Supplemental Pay: Performance bonus Yearly bonus Language: English (Preferred) Work Location: In person Application Deadline: 05/08/2025 Expected Start Date: 05/08/2025

Position: Intern / Fresher – Automation (Female Candidate Preferred) Location: Indore Qualification: B.E. / B.Tech in Electronics, Electrical, or Instrumentation Required Knowledge: Basic understanding of PLC (Programmable Logic Controller) Familiarity with SCADA systems Hands-on or theoretical knowledge of HMI (Human Machine Interface) Candidate Profile: Female candidate preferred Passionate about learning automation technologies Good communication skills and willingness to work in a technical team Open to on-site learning and real-time project exposure Role Overview: This is an opportunity for freshers Pass-Out students to kickstart their career in Industrial Automation. The selected candidate will be trained and guided under experienced professionals in live projects involving PLC, SCADA, and HMI technologies. Interested? Send your resume to ankur.tiwari@ics-india.co.in For more details, call or WhatsApp at 9109188512 Job Types: Full-time, Permanent Pay: ₹10,000.00 - ₹15,000.00 per month Benefits: Life insurance Provident Fund Schedule: Morning shift Supplemental Pay: Performance bonus Work Location: In person

A PLC SCADA HMIs Trainer develops and delivers training programs focused on Programmable Logic Controllers (PLCs), Supervisory Control and Data Acquisition (SCADA) systems, and Human-Machine Interfaces (HMIs). These trainers are responsible for creating and updating training materials, conducting both theoretical and practical sessions, and assessing participant learning. They also stay up-to-date on the latest technologies and industry trends in automation. Curriculum Development and Delivery: Designing and delivering training modules on various aspects of PLC, SCADA, and HMI technologies, including programming, troubleshooting, and system integration. Assessment and Feedback: Evaluating participant learning through tests, projects, and practical evaluations, providing constructive feedback for improvement. Troubleshooting Support: Assisting participants in resolving technical issues and understanding complex automation concepts. Industry Engagement: Staying informed about current trends and best practices in industrial automation through networking and professional development activities. Job Types: Full-time, Part-time Pay: ₹100.00 - ₹200.00 per hour Expected hours: 20 – 30 per week Schedule: Day shift Evening shift Morning shift Work Location: In person Expected Start Date: 01/08/2025

Responsibilities: * Design, develop & implement automated systems using PLCs, HMIs & SCADAs. * Collaborate with cross-functional teams on industrial projects.

Servilink Systems Limited is hiring a Senior Sales Engineer for the Vadodara, Bharuch, and Surat locations. Job Title: Senior Sales Engineer (Automation Sales) Qualification: Diploma / BE - EC / IC / Electrical Location: Vadodara, Bharuch, and Surat Experience: 1- 6 Years Job Overview: We are looking for a Senior sales engineer with a proven track record of achieving sales booking goals & creating new business from the Vadodara, Surat & Bharuch regions . Responsibilities: Sales of System solutions based on Industrial automation hardware and software Products and services within an assigned geographic territory. Generate new Business by Sales and Marketing activities Develop new customers, mainly EPC and OEM. Effectively conduct Customer presentations to all levels of the customer’s organization. Automation project selling- DCS & PLC, SCADA, HMI, OEM, VLC, IMCC, MCC, Field Instruments. Identify and cultivate strategic relationships at all levels of the customer's organization. Sell Automation Solutions that increase customer profitability. Work with OEM & Process EPC. Having Knowledge of PLC, VFD, SCADA, and HMI, & Knowing Industrial Automation. Perks and benefits : As per Industrial Norms For more thrilling details, visit: servilinksystems.com Interested Candidate can share their CVS at: hiringssl@servilinksystems.com Contact Details: 7041770368

JOB PURPOSE (GENERAL NATURE/ OVERVIEW) Industrial Automation Programmer for Development, Deployment, Testing on Pharmaceutical Packaging Machines software’s as per Syntegon Germany standards. KEY ROLES & RESPONSIBILITIES Coordination with Center of Competence for project requirement, planning and execution. Development of software as per Center of competence requirements and implementation of new applications on machines. Software validation and testing using set protocols. Development of new blocks PLC/HMI/SCADA software for existing / new machines software. Understanding the functionality of existing PLC and HMI/SCADA software’s and implementing into new platforms. Preparation, validation and maintenance of software design and functional documentation as per project requirement. COMPETENCIES B.E. or Diploma in Electronics/ Electronics & Telecommunication / Electrical Experience in development of PLC and HMI/SCADA projects. Expertise development of TwinCat 3 platform. Know-How and experience on C#, HMI Visual Studio Platform. Know-How and experience on Inosoft VisiWin platform with Microsoft Visual Studio 2019. Knowledge of C programming will be an added advantage. Domain of Packaging Machines or Special Purpose Machines in Pharmaceutical domain will be preferred. Expected Experience: 3-5+ Years in Industrial automation.