1856 Ethernet Jobs - Page 8

The opportunity Responsible for Configuration of IED s used in EHV Substations, Development of HMI s using vendor specific tools and testing of CRP and SAS of EHV substations (above 132kV Voltage level). Ensure that the Substation Automation Projects delivered by HEIL are configured as per the project requirements and tested, put into service on time, meeting highest HEIL quality and OHS standards. Meet or exceed the customer expectations in testing & configuration of IED in line with project requirements. How you ll make an impact As a testing and configuration engineer, carrying out the configuration of IED s, development of HMI s in line with project requirements and testing of Control and relay panels, Substation automation system delivered and actively contribute in the testing team of Grid Automation Systems. Execute the project IED s configurations and testing safely following all safety standards of HEIL as well as customer. Reports Hazards, Near Misses at working location back to office for records and further improvement. Ensure that customer relations are managed in an optimal way. Carryout the Configurations of IED s and testing the Control, Protection and SAS panels as per the documented process description and checklists. Continuous interactions with testing Lead and expert help to carry out the testing works effectively. Report the Configuration and testing project status testing progress & testing plan to testing Lead. Ensure efficient use of the testing assets like Test kits, Tools etc. Ensures project information of any project is fully taken from testing lead and get all IED s fully configured and tested in line with customer approved drawings and ready for the project specific testing activities before offering the projects to customer during FAT. Handing over the marked-up drawings to engineering for preparing the As-build drawing and onward submission to customer to close the project. Handover the final testing backup CDs, Micro SCADA system backup, IET workplace backup and other backup as per the checklist to lead. Actively and regularly (Compulsory for every project) provides feedback to Engineering Project Management, manufacturing and quality in way that ensures re-usage of experience. Follow the key process like Test procedures, Time sheets and STAART Meetings. Ensure the installed base numerical relays are maintained with minimum revisions by continuously updating the older revisions. Ensure the usage of the latest tools and latest software versions during project IED configurations and testing. Continuous learning & acquiring expertise in various protection schemes and Automation system to achieve the higher growth in learning curve . Responsible to ensure compliance with applicable external and internal regulations, procedures, and guidelines. Living Hitachi Energy s core values of safety and integrity, which means taking responsibility for your own actions while caring for your colleagues and the business Your background Candidate Should be a graduate in Electrical and Electronics engineering with relevant of a minimum of 3 years of experience in testing and commissioning of control and relay panels in projects above 132kV Voltage levels. Should have good knowledge on Power system. Should have hands on experience with 3 Phase injection test kits like Omicron, Doble, Megger, Ponova etc Should have good knowledge on understanding the schematics of control and relay Panels, primary equipment interlocks. Should be ready for frequent travels all over India and overseas wherever assigned for at least next 5 years. Should have e good knowledge on configuration of HEIL IED s and competitors IED s in line with project requirements Should have a minimum of 3 years of experience in commissioning of SAS with IEC61850 standards, IEC101, IEC104, OPC and Modbus protocols. Should have good knowledge on communication protocols listed above. Should have good knowledge on IEC61850 standards, Ethernet, Serial communications. Should have good knowledge on communication protocols such as Modbus, DNP 3. 0, IEC 101, IEC 104, OPC, Should have competency on networking, configuration of managed Ethernet switches. Should have hands on experience on Protocol analyzers like IEC browser and network analyzer tools like wire sharks. Proficiency in both spoken & written English language is required Qualified individuals with a disability may request a reasonable accommodation if you are unable or limited in your ability to use or access the Hitachi Energy career site as a result of your disability. You may request reasonable accommodations by completing a general inquiry form on our website. Please include your contact information and specific details about your required accommodation to support you during the job application process. .

Rockwell Automation is a global technology leader focused on helping the world s manufacturers be more productive, sustainable, and agile. With more than 28, 000 employees who make the world better every day, we know we have something special. Behind our customers - amazing companies that help feed the world, provide life-saving medicine on a global scale, and focus on clean water and green mobility - our people are energized problem solvers that take pride in how the work we do changes the world for the better. We welcome all makers, forward thinkers, and problem solvers who are looking for a place to do their best work. And if that s you we would love to have you join us! Job Description Deliver and accomplish the assigned project / work package on time with good quality, cost effectiveness and customer satisfaction. Ensure technical deliverables matches project / work package requirements. Save engineering cost for GEBS team through application and technical expertise. Ensure site activities are completed as desired by customer and in specified time frame. This position will report to the Team lead. Main Responsibilities: Willingness to travel frequently at site and troubleshoot/ rectify the issues. Deliver and accomplish the assigned projects on time with good quality/ cost effectiveness and customer satisfaction. Have to provide process domain guidelines and solutions following the industry standards. Will work with the Project Managers in the region for delivering the project engineering services. Will perform and manage the complete project execution. Have to report multiple project deliveries with the complete process adherence, meeting or improving on budget and quality requirements with all the possible value additions. Coach other project engineers. Work with PM for scope management, including WBS development. Participate in resolving escalations related to GEBS engineering execution and collaborate with the GEBS Engagement Manager and regional stakeholders for proper closure including lesson learnt sessions. Provide support to the regions on any large project pursuits. Ensure escalation wherever required to the right stakeholders for the benefit of the project execution. Work with PM for scope management, including WBS development. Keep improving self-engineering capabilities and exchange best practice with other team members to improve teams capabilities. Support Team Leader / Lead Engineer on technical issues. Work with Team Leader / Lead Engineer to guarantee customer acceptance. Maximise reusable standard product and engineering in project delivery. Work with Team Leader to manage technical risk in project. Work with Team Leader to clarify technical issues. Cost reduction through process and manufacturing improvement, and through development of reusable engineering or engineering standard. Work with Team Leader to achieve customer acceptance. Demonstrate application and technical expertise to achieve repeat order and retain customer satisfaction. Job Related Competencies: Configuration and programming of automation and controls systems involving HMI and PLC/DCS. Must have a working knowledge of CLX/SLC/PLC for development, troubleshooting, communication and its integrated testing with RA or Third-Party PLC. Knowledge of P&IDs, System Architecture, IO list, Design Documentation for Process Applications. Develop HMI, SCADA Software for Rockwell Systems, or any other Competitors. Rockwell system will be preferable. Must have experience in HMI, SCADA development of the Allen Bradley FactoryTalk View application (Local, Network (Station/ Distributed), ME). Must be familiar with FTView Architecture of application (Area, Data server, HMI server), HMI Alarm/Alarm and Event server. Must be familiar with tagging conventions, Security, Global object development, Data log Model, VBA scripting, Recipe, Trends, Reports, Communication and Integrated testing with PLC (CLX/SLC/PLC5) or Third-party PLC. Design and Engineering of Process PLC Systems / Control Systems. Handle the project starting from Design till site commissioning. Must have a good understanding about process and any regulations point of view. Must have a Knowledge of power applications like Boiler, BMS, Load sharing, and load shedding/ Synchronisation. Solar plant knowledge will be an added advantage. Have to adopt to changing needs and identify any risk as well in the projects at an early stage. High level of expertise in Integrated Architecture, Safety Product, Component Industry Control, Networks, SSB Solutions, and an understanding of Rockwell Softwares. Well versed with preparation of Functional Design Specification, Detail Design Specification, Test protocol including pre-FAT / FAT protocol, SAT protocols. Must be open for travel for FAT, SAT, Commissioning at customer site. High level of expertise in Industry Knowledge, Application Knowledge, Training Skills, and basic understanding of Project Management, Lean Six Sigma Skill, EHS (Environment, Health & Safety). Must have a working knowledge of data communication through OPC protocol. EDUCATIONAL QUALIFICATIONS / WORK EXPERIENCE: Bachelors in Electrical /Instrumentation / Control / Electronics. 5+ years of experience in automation engineering on PLCs (Rockwell - Control Logix, PLC 5, Compact Logix). Hands-on experience in designing, execution & selection of industrial automation products such as PLC/DCS, VFD, HMI/SCADA, Panel Design, (Ethernet, Profibus, Controlnet, and Modbus). Must have gone through complete project life cycle from design phase to commissioning. Knowledge of AB Hardware & Quality Management Systems and Review.

We are seeking a diligent Verification leader to join our team at Renesas. The Verification engineer will be responsible for performing various verification tasks including Test Plan creation, Testcase creation, Coverage closure, Requirements traceability and Gate Level Simulation. They will also review system requirements and track quality assurance metrics. Ultimately, the role of the Verification Engineer is to ensure that our products, applications, and systems work correctly, safely & securely. Responsibilities: Drive Verification R&D team driving technical execution and best in class methodologies used in the design of advanced microcontrollers and microprocessors. Work closely with system architects to understand high level specifications to be able to verify them. Work with various EDA vendors to deploy next generation tools Build strong collaboration with other R&D teams such as RTL, DFT, digital IP, PD, Design Enablement, Emulation, and Validation to achieve project milestones Promote continuous improvement to design techniques to ensure Zero Defect chips Collaborate with SME s and key leaders in architecture, systems, emulation, SoC design, software, physical design, and IP teams developing key technical networks to influence overall design improvements and verification methodologies Responsible for developing detailed Technical SoC verification execution plans, progress reports and tracking milestones, managing technical risks, and providing mitigations to meet schedule quality and costs commitments. Communicate across technical teas as well as provide executive level presentations Complete ownership for SoC verification quality sign-offs ensuring all deliverables for team hand-offs. Drive best in class verification methodologies collaborating with global internal and external SME s and developing adoption and compliance processes. Including, driving key innovation strategies which significantly impact efficiency and quality for overall R&D and ROI. Qualifications Degree in Electrical/Electronic Engineering, Computer Engineering or Computer Science At least 10 years of experience in SoC Verification domains and have working knowledge of industry standard EDA toolkits. Proven experience in testbench design and development using UVM methodology for IP/Subsystem and SOC. Experience in Microcontroller and Microprocessor architecture & Interconnect Experience in protocols like AHB/AXI/CHI, Memory (ROM, RAM, Flash, LPDDR5/5x) and memory controllers. Advanced knowledge of Verilog, System Verilog, C/C++, Shell . Good knowledge in scripting like Perl, TCL or Python is a plus High proficiency in Metric Driven Verification concepts, functional and code coverage. Expertise in directed and constrained random methodologies. Good knowledge of formal verification methodologies and assertions. Experience with debugging of designs pre- and post-silicon, in simulation and on the bench. Excellent written and verbal communication skill. Must have worked on complex, multi-core SoC s with extensive interconnects and a large range of peripherals. Fair domain knowledge of clocking, system modes, power management, debug, security and other architectures is a must. Any of following experience would be a plus: High Speed Peripherals like DDR, PCIe, UCIe, Ethernet, GPU, VPU (Video Processing Unit); NIC/Flex NOC interconnect; Flash memory subsystems. Company Description Renesas is one of the top global semiconductor companies in the world. We strive to develop a safer, healthier, greener, and smarter world, and our goal is to make every endpoint intelligent by offering product solutions in the automotive, industrial, infrastructure and IoT markets. Our robust product portfolio includes world leading MCUs, SoCs, Analog and power products, plus Winning Combination solutions that curate these complementary products. We are a key supplier to the world s leading manufacturers of electronics you rely on every day; you may not see our products, but they are all around you. Renesas employs roughly 21, 000 people in more than 30 countries worldwide. As a global team, our employees actively embody the Renesas Culture, our guiding principles based on five key elements: Transparent, Agile, Global, Innovative, and Entrepreneurial. Renesas believes in, and has a commitment to, diversity and inclusion, with initiatives and a leadership team dedicated to its resources and values. At Renesas, we want to build a sustainable future where technology helps make our lives easier. Join us and build your future by being part of what s next in electronics and the world.

Job Summary: If you are an Instrumentation Engineer seeking an opportunity to grow, develop, and expand your professional skills, Emerson has a position for you at our Hyderabad location. As a Senior Engineer, you will be part of a team responsible for performing preventive maintenance, Shutdown maintenance, fixing, logic and graphics modification, as well as supervising and supervising the DCS system. In This Role, Your Responsibilities Will Be: Manage DCS system analysis and solving services on Emerson DeltaV DCS product, to end user customers as well as to in-house field service team and maintenance execution. Respond promptly to service request from customers. Keep repair time to a minimum by using an adequate philosophy, provide preventive maintenance per agreement or upon request, advises customers in methods of operation and utilization, performs installation and start-up, shutdown support. Collaborate optimally with all internal team members to assure professional business relationships with our customers. Acquire and maintain knowledge of Emerson DeltaV Systems Products and related equipment/ services, their uses and applications with customer. Who You Are: You possess a solid technical mentality, remain open-minded and curious, willingness that keep you adaptable. Whether collaborating with a team or working independently, you excel and communicate with clarity, openness, and respect. You seek new approaches to solve problems. You analyze multiple and diverse sources of information to define problems accurately before moving to solutions. For This Role, You Will Need: Graduate or Engineering degree with technical direction or equivalent through experience on DeltaV DCS system. Proven ability to work well in a team as well as independently, strong problem solving capability. Capable of working under stress and high performance/expectations pressure. Good verbal and written communication skills. Fundamental knowledge of Distributed Control Systems (DCS) is required. Basic and Advanced control algorithms. Experience in the Pharma, Refinery or Chemical industries is a plus. Familiarity with continuous processes, Profibus, Foundation Fieldbus, Networking, and Safety Systems is preferred. Understanding of basic cybersecurity requirements according to ISA Standards is beneficial but not mandatory. A desire of innovation is a must. Preferred Qualifications That Set You Apart: Bachelors degree in Electronics, Instrumentation, or Control Systems Engineering. Knowledge of control systems, process automation, and instrumentation. Proficiency in programming languages (e. g. , function block diagram, SFC) Understanding of networking protocols (e. g. , Ethernet, Modbus, Profibus) Our Culture & Commitment to You: . .

Company Qualcomm India Private Limited Job Area Engineering Group, Engineering Group > Software Engineering General Summary As a Lead Engineer the WLAN HALPHY Group, you will be owning, designing, developing and maintaining WLAN firmware and HALPHY components that implements functional aspects of WLAN features on low memory foot print processors that will work in tandem with device drivers running on the host processors. You would be involved in requirement gathering, requirement analysis, scoping of the work, planning the project and execution. You will be also leading a small team for project execution and play point of contact role, represent the team in external meetings to provide status update. You will be working on cutting edge WiFi technologies, solving challenging WiFi design & performance issues and working with some of the leading WiFi ODMs & OEMs across the globe on their sometimes high pressure & tough timelines. Skills/Experience Overall experience of at least 6-9 years which includes minimum 2-4 years of project scoping, planning, execution and team management experience, and At least 4-5 years of relevant hands-on technical experience in WLAN/Linux driver development with a record of strong individual technical achievement Strong track record of project scoping, planning and execution. Strong design, architect and problem solving skills with proven record of complex system issues resolved. Strong programming skills in C Must have hands on working experience working on real-time embedded systems Experience in working on Firmware in small memory footprint processors is a BIG plus Hands on experience in Networking driver development, Ethernet and Wireless LAN driver development preferred RF level knowledge is a plus Excellent verbal and written communication skills Experience in Wireless LAN protocols is a BIG plus Minimum Qualifications Bachelor's degree in Engineering, Information Systems, Computer Science, or related field and 3+ years of Software Engineering or related work experience. OR Master's degree in Engineering, Information Systems, Computer Science, or related field and 2+ years of Software Engineering or related work experience. OR PhD in Engineering, Information Systems, Computer Science, or related field and 1+ year of Software Engineering or related work experience. 2+ years of academic or work experience with Programming Language such as C, C++, Java, Python, etc. Educational Requirements BE/BTech/MTech in Computer Science or in Electronics preferred with proven success in a challenging academic program. Applicants : Qualcomm is an equal opportunity employer. If you are an individual with a disability and need an accommodation during the application/hiring process, rest assured that Qualcomm is committed to providing an accessible process. You may e-mail disability-accomodations@qualcomm.com or call Qualcomm's toll-free number found here. Upon request, Qualcomm will provide reasonable accommodations to support individuals with disabilities to be able participate in the hiring process. Qualcomm is also committed to making our workplace accessible for individuals with disabilities. (Keep in mind that this email address is used to provide reasonable accommodations for individuals with disabilities. We will not respond here to requests for updates on applications or resume inquiries). Qualcomm expects its employees to abide by all applicable policies and procedures, including but not limited to security and other requirements regarding protection of Company confidential information and other confidential and/or proprietary information, to the extent those requirements are permissible under applicable law. To all Staffing and Recruiting Agencies : Our Careers Site is only for individuals seeking a job at Qualcomm. Staffing and recruiting agencies and individuals being represented by an agency are not authorized to use this site or to submit profiles, applications or resumes, and any such submissions will be considered unsolicited. Qualcomm does not accept unsolicited resumes or applications from agencies. Please do not forward resumes to our jobs alias, Qualcomm employees or any other company location. Qualcomm is not responsible for any fees related to unsolicited resumes/applications. If you would like more information about this role, please contact Qualcomm Careers. 3077245

Increasing digitalization and flexibility of production processes presents outstanding potential. In Digital Industries, we enable our customers to unlock their full potential and drive digital transformation with a unique portfolio of automation and digitalization technologies. From hardware to software to services, we’ve got quite a lot to offer. How about you? We blur the boundaries between industry domains by integrating the virtual and physical, hardware and software, design and manufacturing worlds. With the rapid pace of innovation, digitalization is no longer tomorrow’s idea. We take what the future promises tomorrow and make it real for our customers today. Join us - where your career meets tomorrow. Looking for Siemens EDA ambassadors We are passionate about innovations that mean real progress, and we are curious about technologies that still need to be developed. Do you want to use curiosity, passion, and creativity to make the lives of millions of people easier and better? Join us – whichever path you take, we’re looking forward to seeing your point of view! Veloce Transactors (Accelerated Verification IPs) Veloce Transactor Group is part of Mentor Emulation Division R&D located in Noida. Group develops transactors (RTL based IPs/VIPs) for various protocol solutions in Networking, Display, Storage, Mobile, Automobile etc. At present Veloce Transactor Library supports more than 25 protocol solution and growing further. This is your Role Individual will be responsible for developing transactor (xVIP) solutions for CCIX or PCIe based interconnect technology. Primary responsibilities include understanding standard specifications, develop architecture and micro-arch for the design and writing a synthesized design using Verilog/System Verilog. Required Experience: We seek a graduate with at 1-8 years of relevant working experience with (BE/BTech/ME/MTech/MS) from a reputed engineering college. We value your experience on the protocol e.g. PCIe, USB, Ethernet, AMBA in Design or Verification. Good understanding of IP Verification Methodologies, Verification procedures and practices are plus! Experience in one or more verification techniques such as simulation, emulation, acceleration, formal, etc We value expertise in Verilog, SystemVerilog, and SystemC, as well as experience in developing RTL for FPGAs, ASICs, and IPs, as this will greatly contribute to the quality of our products. We expect candidates to be able to build verification test plans and environments, develop test cases, utilize VIPs, and efficiently debug defects identified during verification processes. We consider exposure to object-oriented programming languages like C++ an advantage, and experience in scripting languages such as Perl will also be valuable in automating tasks and improving efficiency. You need to engage with customers for Deployment and R&D assistance. We've got quite to offer, how about you? Join our Digital World We are an equal opportunity employer and value diversity at our company. We do not discriminate on the basis of race, religion, colour, national origin, sex, gender, gender expression, sexual orientation, age, marital status, veteran status, or disability status. We will ensure that individuals with disabilities are provided reasonable accommodation to participate in the job application or interview process, to perform essential job functions, and to receive other benefits and privileges of employment. Please contact us to request accommodation. At Siemens, we are always challenging ourselves to build a better future. We have some of the most inquisitive minds working across the world, re-imagining the future and doing extraordinary things.

Job Title Site Supervisor Job Description Your department Site management is responsible of providing complete project execution support through project life cycle globally. Vanderlande is the global market leader in baggage handling systems for airports, and sorting systems for parcel and postal services. The company is also a leading supplier of warehouse automation solutions. With a consistently increasing order intake of more than 2.8 billion euros, it has established a global reputation over the past six decades as a highly reliable partner for value-added automated material handling solutions. We are looking for a Site Supervisor for Global projects. You will be part of the team that Lead and Support project execution across the Globe. Your position As a Site Supervisor your role is to lead the site execution work and supervise multiple Site Supervisors (Mechanical/ Electrical) and multiple teams of contractors for mechanical and electrical work. And, in parallel, he will work with the project, procurement, Safety, Engineering, and Field Quality team for better Planning, Site Procurements, Safety Implementation, Engineering changes, and to maintain Vanderlande's standard of execution. Job Description Supervision of the Mechanical, electrical and control installation, guide, and train in Electro-Mechanical installation teams. Inspect and diagnose complex mechanical/electrical systems Interpret engineering drawings in reference to layout, location, and operation of the system(s). Should have hand on experience with AutoCAD, Navis and E. Plan drawing. Should possess conceptual knowledge of PLC systems (Siemens), different type of hardware’s, Communication protocols (Profinet, Ethernet, Profibus, ASI). Should have knowledge of different types of Switch gears, Drives and RLC circuits. Should have knowledge of I/O testing. Support the commissioning, testing and integration of material handling system Managing the quality inspections for the installed equipment with focus on the electrical installation. You ensure in close coordination with our engineers that the equipment is installed in accordance with the specification. Support for the site handover and conduct surveys for installation areas. Aware of our contract and responsibilities and identify deviations. Reporting progress to the site manager and project manager. Join progress meetings Responsible for the electrical and control installation progress on site and ensure to meet the program milestones Responsible for the site safety and quality of the installed electrical and control equipment Responsible for daily, weekly, and monthly installation reports and toolbox talk with supervisor team. Cooperate with your project manager in the establishment of policies and procedures related to Field Support Desired profile Bachelor's degree in electrical/ Mechanical engineering, mechatronics. 6 to 8 years’ experience in handling WS/ Parcel or Airport system. Experience of different type of sorters (Line/Loop Sorters) are preferable. General PLC programming or troubleshooting certification Safety certification line IOSH, Emergency preparedness training. Travel Need to Travel 70% or more. Base Location Pune India. Mandatory Skills Leadership and presentation skills including relentless problem solving, results orientation Should have positive approach, right attitude etc. Ability to effectively lead and work under pressure, Ability to work constructively with all stakeholders, building both internal and external relationships. Proficiency in the application of computerized systems, including standard business applications (i.e., MS Office) Effective verbal and written communications skills Negotiation skill and commercial experience to manage contract scope changes directly with clients, suppliers Demonstrated organizational skills, and company ethics Strong bias for following processes and continual process improvement Strong sense of time urgency for critical-path project items, milestones, and key project deliverables

Roles and Responsibilities Design verification using UVM (Universal Verification Methodology) for IP/SoC level verification. Develop test benches from scratch, including creating drivers, monitors, and predictors. Utilize System Verilog to write verification code and debug issues. Collaborate with cross-functional teams to identify requirements and develop test plans. Participate in peer reviews to ensure high-quality deliverables. Desired Candidate Profile 4-10 years of experience in SOC/IP Verification with expertise in DV on Cpu, DDR, Ethernet, PCIe protocols. Bachelor's degree (B.Tech/B.E.). Master's degree preferred but not mandatory (M.Tech). Strong understanding of GLS (Global Logic Synthesis) concepts.

Rockwell Automation is a global technology leader focused on helping the world’s manufacturers be more productive, sustainable, and agile. With more than 28,000 employees who make the world better every day, we know we have something special. Behind our customers - amazing companies that help feed the world, provide life-saving medicine on a global scale, and focus on clean water and green mobility - our people are energized problem solvers that take pride in how the work we do changes the world for the better. We welcome all makers, forward thinkers, and problem solvers who are looking for a place to do their best work. And if that’s you we would love to have you join us! Job Description Deliver and accomplish the assigned project / work package on time with good quality, cost effectiveness and customer satisfaction. Ensure technical deliverables matches project / work package requirements. Save engineering cost for GEBS team through application and technical expertise. Ensure site activities are completed as desired by customer and in specified time frame. This position will report to the Team lead. Main Responsibilities: Willingness to travel frequently at site and troubleshoot/ rectify the issues. Deliver and accomplish the assigned projects on time with good quality/ cost effectiveness and customer satisfaction. Have to provide process domain guidelines and solutions following the industry standards. Will work with the Project Managers in the region for delivering the project engineering services. Will perform and manage the complete project execution. Have to report multiple project deliveries with the complete process adherence, meeting or improving on budget and quality requirements with all the possible value additions. Coach other project engineers. Work with PM for scope management, including WBS development. Participate in resolving escalations related to GEBS engineering execution and collaborate with the GEBS Engagement Manager and regional stakeholders for proper closure including lesson learnt sessions. Provide support to the regions on any large project pursuits. Ensure escalation wherever required to the right stakeholders for the benefit of the project execution. Work with PM for scope management, including WBS development. Keep improving self-engineering capabilities and exchange best practice with other team members to improve team's capabilities. Support Team Leader / Lead Engineer on technical issues. Work with Team Leader / Lead Engineer to guarantee customer acceptance. Maximise reusable standard product and engineering in project delivery. Work with Team Leader to manage technical risk in project. Work with Team Leader to clarify technical issues. Cost reduction through process and manufacturing improvement, and through development of reusable engineering or engineering standard. Work with Team Leader to achieve customer acceptance. Demonstrate application and technical expertise to achieve repeat order and retain customer satisfaction. Job Related Competencies: Configuration and programming of automation and controls systems involving HMI and PLC/DCS. Must have a working knowledge of CLX/SLC/PLC for development, troubleshooting, communication and its integrated testing with RA or Third-Party PLC. Knowledge of P&IDs, System Architecture, IO list, Design Documentation for Process Applications. Develop HMI, SCADA Software for Rockwell Systems, or any other Competitors. Rockwell system will be preferable. Must have experience in HMI, SCADA development of the Allen Bradley FactoryTalk View application (Local, Network (Station/ Distributed), ME). Must be familiar with FTView Architecture of application (Area, Data server, HMI server), HMI Alarm/Alarm and Event server. Must be familiar with tagging conventions, Security, Global object development, Data log Model, VBA scripting, Recipe, Trends, Reports, Communication and Integrated testing with PLC (CLX/SLC/PLC5) or Third-party PLC. Design and Engineering of Process PLC Systems / Control Systems. Handle the project starting from Design till site commissioning. Must have a good understanding about process and any regulations point of view. Must have a Knowledge of power applications like Boiler, BMS, Load sharing, and load shedding/ Synchronisation. Solar plant knowledge will be an added advantage. Have to adopt to changing needs and identify any risk as well in the projects at an early stage. High level of expertise in Integrated Architecture, Safety Product, Component Industry Control, Networks, SSB Solutions, and an understanding of Rockwell Software's. Well versed with preparation of Functional Design Specification, Detail Design Specification, Test protocol including pre-FAT / FAT protocol, SAT protocols. Must be open for travel for FAT, SAT, Commissioning at customer site. High level of expertise in Industry Knowledge, Application Knowledge, Training Skills, and basic understanding of Project Management, Lean Six Sigma Skill, EHS (Environment, Health & Safety). Must have a working knowledge of data communication through OPC protocol. EDUCATIONAL QUALIFICATIONS / WORK EXPERIENCE: Bachelors in Electrical /Instrumentation / Control / Electronics. 5+ years of experience in automation engineering on PLCs (Rockwell – Control Logix, PLC 5, Compact Logix). Hands-on experience in designing, execution & selection of industrial automation products such as PLC/DCS, VFD, HMI/SCADA, Panel Design, (Ethernet, Profibus, Controlnet, and Modbus). Must have gone through complete project life cycle from design phase to commissioning. Knowledge of AB Hardware & Quality Management Systems and Review. Rockwell Automation’s hybrid policy aligns that employees are expected to work at a Rockwell location at least Mondays, Tuesdays, and Thursdays unless they have a business obligation out of the office.

Job Title: Customer Support – International Voice Process Company: Tech Mahindra Location: Sector 60, A-20, Noida Work Details: 5 Days Working Both Side Cab Facility Majorly Night Shifts (Rotational Week Offs) Experience Required: Minimum 6 months of experience in international voice support Education: Must be a Graduate (B.Tech / BCA preferred) Strong technical knowledge is a must Required Skills: Excellent written communication Knowledge of networking: LAN / WAN / Ethernet / Internet IOS Model Copper & Fiber Fiber Network Planning Familiarity with: Road Mapping Tools GIS (Geographic Information System) Tools for Network Planning Responsibilities: Handle international client queries via calls. Assist in fiber layout & network planning using GIS tools Troubleshoot LAN/WAN and internet-related issues Work closely with technical teams and maintain logs Note: Looking for Immediate Joiners Only Interested candidates can share their CVs at: mahak.srivastava@techmahindra.com Job Type: Full-time Pay: From ₹23,000.00 per month Application Question(s): How many years of experience do you have? Can you join immediately? Language: English (Preferred) Work Location: In person

Roles and Responsibilities Design verification using UVM (Universal Verification Methodology) for PCIe, DDR, Ethernet interfaces on SOCs. Develop test benches in System Verilog for verifying complex digital designs. Collaborate with cross-functional teams to identify requirements and develop test plans. Utilize GLS (Golden Labs Simulation) tools for simulation setup and debugging. Participate in peer reviews to ensure high-quality deliverables. Must have good debugging skills. Experience in any of the slow speed peripherals like I2C, SPI, UART is a plus. Desired Candidate Profile 5 years of experience in SV/UVM Lead role with expertise in design verification using UVM methodology. Bachelor's degree (B.Tech/B.E.). Master's degree preferred but not mandatory (M.Tech). Strong understanding of SystemVerilog programming language and its application in DV testing.

Rockwell Automation is a global technology leader focused on helping the world’s manufacturers be more productive, sustainable, and agile. With more than 28,000 employees who make the world better every day, we know we have something special. Behind our customers - amazing companies that help feed the world, provide life-saving medicine on a global scale, and focus on clean water and green mobility - our people are energized problem solvers that take pride in how the work we do changes the world for the better. We welcome all makers, forward thinkers, and problem solvers who are looking for a place to do their best work. And if that’s you we would love to have you join us! Job Description Job Summary: The consultant - Network & Security role encompasses the lead technical advisor responsibilities for working with our valued clients on large-scale, multi-site global projects to deploy network solutions. The Sr. Engineer - Networks will work with important internal and external contacts on the deployment and rollout of network infrastructure and security related efforts. These projects will be specific to promoting a Connected Enterprise by connecting the Industrial Internet of Things at our main global customer facilities. You will report to the Execution Manager. Your Responsibilities 'Hands-on' experience in assessing, designing and deploying network infrastructure in environments including process automation, discrete controls, and automated manufacturing processes / equipment. Experience in designing and deploying network infrastructure (switches, routers, firewalls etc.) within an Industrial Network. Understanding of multiple industry standards including ISA, ANSI, NEMA, NERC, IDC, NEC and NIST standards. Experience in PLC, Networking and SCADA design/programming including data extraction and data analysis. Solid technical skills with multiple Ethernet protocols including EtherNet/IP, specifically round assessment, design and implementation of complex systems. Ability to handle multiple projects / interactions, and to work with different global teams, clients and vendors including those in international regions. Familiarity with a variety of networking and security concepts, practices and procedures, to include manufacturing and enterprise network convergence, network protocols, communication optimization, application effects on system performance and human exploitation techniques on the manufacturing network. Experience in developing and deploying solutions in a virtual environment. Design, implement and support important global customers', converged business and manufacturing/industrial networks and user needs to be in parallel with their overall business strategies. Write detailed documentation that includes customer requirements, system specifications, observed issues with remediation recommendations or implementation plans to develop manufacturing infrastructure. Design, recommend and implement network infrastructure and associated configuration changes. Design customer secure manufacturing architectures and provide vision, problem anticipation, and solution to customers. The Essentials - You Will Have Bachelor's Degree in Electrical Engineering, Industrial Engineering, Computer Science or Information Technology or related technology-driven degree. If no degree, 8+ years of experience in Network Designing & Implementation Virtualization and Industrial Security Controls. 8+ years of hands-on experience configuring IT/OT network infrastructure equipment (Cisco Switches, Virtual Server Environments, Cisco ASA, Fortigate/Palo Alto Firewalls,Anti-Virus Software). 5+ years of exp. in Industrial Networking related experience. In-depth understanding of Ethernet/IP and CIP protocol. Previous experience working as part of a large, diverse global team completing full project life-cycle implementations. Travel Requirements: - Flexibility for travel 50% - 60% is required and can include both domestic and international trips. Legal authorization to work in the country of residence is required. The Preferred - You Might Also Have Recognised Network Certification (CCNA Industrial, CCNA / CCNP / CCIE Routing and Switching/Wireless, VCA, VCP, Cisco INS, GICSP. Specific focus on NIST 800-82, NERC-CIP, IEC-62443 Standards would be an added benefit. Willing to contribute as an individual contributor. What We Offer Our benefits package includes … Comprehensive mindfulness programmes with a premium membership to Calm. Volunteer Paid Time off available after 6 months of employment for eligible employees. Company volunteer and donation matching programme – Your volunteer hours or personal cash donations to an eligible charity can be matched with a charitable donation. Employee Assistance Program. Personalised wellbeing programmes through our OnTrack programme. On-demand digital course library for professional development. and other local benefits! At Rockwell Automation we are dedicated to building a diverse, inclusive and authentic workplace, so if you're excited about this role but your experience doesn't align perfectly with every qualification in the job description, we encourage you to apply anyway. You may be just the right person for this or other roles. Rockwell Automation’s hybrid policy aligns that employees are expected to work at a Rockwell location at least Mondays, Tuesdays, and Thursdays unless they have a business obligation out of the office.

Role: Embedded Controller Firmware Location: Noida Experience: 6-9 yrs Role Description This is a contract role for an Embedded Controller Firmware position located on-site in Noida. The Embedded Controller Firmware specialist will be responsible for developing, testing, and maintaining firmware for embedded controllers. Daily tasks will include programming in C/C++, debugging and testing firmware, collaborating with hardware engineers, and ensuring the firmware meets performance and reliability standards. Position Requirements The right person for this position should have 6-9 years of experience in IoT embedded systems. Knowledge: 1. Exposure to Microcontroller Architecture Family e.g. ARM Cortex, Microchip, Xtensa ESP32, TI CC32XX 2. Knowledge of any RTOS, FreeRTOS, uC OS, EmbOSs, VxWorks, QNX 3. Knowledge of Microcontroller peripherals and drivers e.g. ADC, DAC, I2C, SPI, UART, CAN, RS485, DMA, Ethernet, SD/eMMC, SDIO 4. Knowledge of networking concepts like OSI layers, embedded TCP/IP stacks and common IP protocols 5. Knowledge of RF protocols WIFI, Zigbee, Bluetooth/BLE, IoT Cellular 6. Knowledge of IoT communication protocols MQTT, COAP 7. Knowledge of Build toolchains and framework such as IAR, GCC, Keil, Mplab 8. DFMA and DFMEA, Design release process 9. Coding standards, guidelines and compliance tools 10. Version control and repositories using git tools 11. Software quality assurance and automated testing tools Experience / Skills: 1. Embedded software design cycle 2. Documenting Software Design (flow charts, state diagram, logic design, analysis, implementation, debugging and testing etc) 3. Good hands-on programming in Embedded C, C++. 4. Experience with AWS/Google cloud for device connectivity. Exposure to IoT cloud services. e.g. AWS IoT 5. Software and Hardware integration testing and troubleshooting 6. Protocol debugging using protocol analyzer 7. Understanding of Schematic/ Hardware design around microcontrollers like ST, TI, Atmel, Microchip, ARM core Qualifications and Experience: M.Tech/B.Tech in Computer Science / Electronics Engineering. Should have worked on IoT based embedded device projects. Other Requirements: 1. Team player 2. Good communication and presentation skills 3. Ability to multitask 4. Design Thinking 5. Have passion for Design & Technology 6. Should have a “can do” attitude 7. Excellent interpersonal skills

About OMRON Founded in 1933, OMRON has come a long way since and has evolved to become an organization committed to creating new social values. Today, In the APAC region, OMRON has a strong presence in Industrial Automation, Healthcare, and Device & Module Solutions. Let’s begin the exciting journey of Shaping Future 2030 together with us! About OMRON Industrial Automation Business Come join our Industrial Automation team, who is striving to create social value - “Improve manufacturing that supports a sustainable society”- the business has the industry’s most extensive portfolio comprising sensors, controllers, motors, robotics, vision, and safety solutions. Understand more about our Industrial Automation Business HERE. Join OMRON Talent Community Don't find this job opening relevant? Shape-up your future with us and be a part of OMRON’s growing family. To get job opportunity alerts, register yourself and submit your resume to our talent community network HERE Short Description Job Responsibilities Technical Service Support: 40% 1.1Visit customer site for troubleshooting, modifications, maintenance support and machine breakdown. 1.2Study, design, develop application and prepare the technical support plan within the TAT for the customer. 1.3Provide technical support to end users, OEM customers and channel partners on phone/ email/ site visit. 1.4Conduct product demo-presentation, trials to customers. 1.5Conduct product training, maintenance training (robotics) to the customers. 2.Service Business Generation: 40% 2.1Drive service revenue generation through paid support activities. 2.2Promote & generate leads for Robotic AMCs at end users. Commercial Service support: 20% 3.1Prepare service quotation, Proforma Invoice and arrange for service invoice through Suppy Chain department. 3.2Submission of MOM (minutes of meeting) /Field service report, monthly service revenue estimation report. 3.3Visiting shop floor and get the customer feedback on service support and submit the report in time. 3.4Extend the support for customer registration, vendor registration and other agreement related activities. Job Requirements B.E. in Electrical/Electronic/Intrumentation OR Equivalent Diploma. Experience 05+ years in technical service support into automation industry. Experience in application programming on Motion & Robotics. Experience in installation & commission of Vision & Safety System. Expereince of automation products like PLC, HMI, SCADA, VFD, SERVO. Knowledge of Industrial Networking and communications like Device Net, Modbus, Profi-bus, Profi-net, Ethernet, Ethercat etc. Knowledge of robot maintenance/repair. Proficiency in creating and maintaining technical documentation, including system diagrams, schematics, and user manuals. Excellent communication and interpersonal skills to work closely with clients, understand their requirements, and provide effective solutions Travel as per business purpose 40% Disclaimer The Job Description has been designed to indicate the general nature and essential duties and responsibilities of work performed by job holders within this classification. It may not contain a comprehensive inventory of all duties, responsibilities, and qualifications required of employees to do this job. Duties may be subject to periodic review by the HR, immediate supervisor or nominated representative (in consultation with the job holder) to reflect the changing work composition of the business. Why Join us OMRON’s mission is to improve lives and contribute to a better society. We endeavor to make our diverse workforce feel equally valued and enjoy equal opportunities to help us achieve so. So come, work with the best of the best teams, collaborate, and innovate together with diverse, capable minds across the globe.

We’re looking for a highly skilled Embedded Software Engineer to join our dynamic R&D team. If you have hands-on experience in microcontroller-based designs and cloud-connected devices, we want to hear from you! 📅 Urgent Requirement – Profiles Needed by EOD Today 📍 Location: Noida only 🕒 Employment Type: Contract Knowledge: 1. Exposure to Microcontroller Architecture Family e.g. ARM Cortex, Microchip, Xtensa ESP32, TI CC32XX 2. Knowledge of any RTOS, FreeRTOS, uC OS, EmbOSs, VxWorks, QNX 3. Knowledge of Microcontroller peripherals and drivers e.g. ADC, DAC, I2C, SPI, UART, CAN, RS485, DMA, Ethernet, SD/eMMC, SDIO 4. Knowledge of networking concepts like OSI layers, embedded TCP/IP stacks and common IP protocols 5. Knowledge of RF protocols WIFI, Zigbee, Bluetooth/BLE, IoT Cellular 6. Knowledge of IoT communication protocols MQTT, COAP 7. Knowledge of Build toolchains and framework such as IAR, GCC, Keil, Mplab 8. DFMA and DFMEA, Design release process 9. Coding standards, guidelines and compliance tools 10. Version control and repositories using git tools 11. Software quality assurance and automated testing tools Experience / Skills: 1. Embedded software design cycle 2. Documenting Software Design (flow charts, state diagram, logic design, analysis, implementation, debugging and testing etc) 3. Good hands-on programming in Embedded C, C++. 4. Experience with AWS/Google cloud for device connectivity. Exposure to IoT cloud services. e.g. AWS IoT 5. Software and Hardware integration testing and troubleshooting 6. Protocol debugging using protocol analyzer 7. Understanding of Schematic/ Hardware design around microcontrollers like ST, TI, Atmel, Microchip, ARM core Qualifications and Experience: M.Tech/B.Tech in Computer Science / Electronics Engineering. Should have worked on IoT based embedded device project If interested, please share profiles by EOD today . Send resumes to mythili@themesoft.com 🔁 Referrals are welcome!

B-Tech in Electronic & Communication from a reputed regular collage 4 year course. Experience: Minimum 4 year PLC programming in a System House/ system integrator , as a PLC programmer. Industrial Experience Nature : - Must be Working with Any System Integrator of below mention PLC Brand, NO Maintenance & Machine Tool Builder Line Experience will be considered. Key Skills: - PLC PROGRAMMING PREFERANCE IN - SIEMENS, MITSUBISHI, and ALLEN BRADELY. MUST HAVE GOOD HOLD IN PLC, HMI/ GOT, SCADA PROGRAMMING, VFD PROGRAMMING. Advance programming like all communication, protocol, RS 232, 485, Ethernet, Ethercat, Modbus, and Profinet etc. Programming of Servo Motors, Robot, CNC. Roles and Responsibilities: Develop Machine Logic/ Program in PLC as per defied requirement, Panel Testing, PLC I/O Testing, Trouble shouting. Study panel drawing & suggest changes if req. Testing of Machine at factory. Installation of machine at Site. Commissioning of machine at site. Prepare Documentation of Control & Ladder drawing. Prepare Flow Chart. Open for travelling.

Location Bangalore, Karnataka, 560100 Category Engineering / Information Technology Job Type Full time Job Id 1186255 No Compute Engineer This role has been designed as ‘Hybrid’ with an expectation that you will work on average 2 days per week from an HPE office. Who We Are: Hewlett Packard Enterprise is the global edge-to-cloud company advancing the way people live and work. We help companies connect, protect, analyze, and act on their data and applications wherever they live, from edge to cloud, so they can turn insights into outcomes at the speed required to thrive in today’s complex world. Our culture thrives on finding new and better ways to accelerate what’s next. We know varied backgrounds are valued and succeed here. We have the flexibility to manage our work and personal needs. We make bold moves, together, and are a force for good. If you are looking to stretch and grow your career our culture will embrace you. Open up opportunities with HPE. Job Description: HPE Operations is our innovative IT services organization. It provides the expertise to advise, integrate, and accelerate our customers’ outcomes from their digital transformation. Our teams collaborate to transform insight into innovation. In today’s fast paced, hybrid IT world, being at business speed means overcoming IT complexity to match the speed of actions to the speed of opportunities. Deploy the right technology to respond quickly to market possibilities. Join us and redefine what’s next for you. What you will do: The candidate provides Operate and Admin support on Compute infrastructure and the Operating system in accordance with contractually established terms and conditions and established technical standards. Provides technical input, solutions, and recommendations to deal pursuit. Engaged in and provides support for transition/ transformation efforts. Provides IT infrastructure and/ or application infrastructure lifecycle technical support, including planning, project management, installation, on- going management/ monitoring/ troubleshooting, and de- installation, following operational policies and processes that are compliant with industry standards (e.g. Information Technology Infrastructure Library (ITIL)). Manages the technical/ service relationship between the company and the customer, and between the company and subcontractors/ vendors. Works with the key customers and/ or internal businesses/ end user representatives (Infrastructure Support Managers, Client Manager and the Account Delivery Manager) to retain customers and build the business. What you will bring: Resolve customer’s issues via the telephone, email or remote sessions. Reproduce issues in-house and responding back in a timely manner. Regular follow ups with customers with recommendations, updates and action plans. Identify and escalate issues in a timely manner to vendor according to Standard Operating Procedures. Leverage internal technical expertise, including peers, mentors, knowledge base, community forums and other internal tools, to provide the most effective solutions to customer issues. Collaborate with other CoE/HW teams in diagnosing and isolating the cause of complex issues. Maintain quality on case documentation, SLA timeframes and operational metrics. Performs within the Productivity Measure of the team (scorecard) Incident Management: Resolve single and cross technology incidents independently. Lead the team members to resolve complex or cross technology incidents. Escalation Management: Identify, manage, and lead technical escalations. Participate in formal Escalation when required to support escalation especially during crisis. Problem Management: Proactively and reactively look for solutions to prevent problems from occurring in team/technology area. Perform Trend and Root cause analysis. Change Management/Implementation: Independently prepare, review, implement, rollback and test plan for change records. Perform risk and impact analysis for changes, May lead or participate in a Change Advisory Board. Patch and Security Management: Apply patch and security changes per policy. Proactively monitor the environment for patch compliance. Analyze patches for compatibility with each customer or internal infrastructure environment. Configuration Management: Ensure Configuration Management Database (CMDB) entries are complete and accurate. Must Have: Broad technical knowledge on HPE ISS solutions – Installing, Configuring & Troubleshooting of C7000 enclosures, HPE Synergy, Virtual Connects, Blade Switches- SAS,Ethernet & FC, ProLiant Blades & Storage Blades Operating Systems Knowledge – Install, configure, administration and troubleshoot RHEL/SUSE(as Bare-Metal OS & as VMs on Hypervisors) and VMware Working knowledge on Redhat/SUSE Linux Troubleshooting OS logs for hardware issues from VM-support, HPSreport, SOSreport, Support-Config etc Knowledge on SAN, NAS technologies (Ethernet / iSCSI, FC, FCOE) Knowledge on DAS Storage & HBAs – Smart Array /RAID, SSDs SAS, SATA etc Disaster Recovery planning and conducting DR tests. Performed routine Performance Analysis, Capacity analysis, security audit analysis reports to customer for necessary planned changes Linux Vulnerability assessment and Mitigation Serviceguard cluster configuration and management on Linux and Integration with Database and ERP Solution Knowledge on Patch deployment solutions – Redhat Satellite , SUSE Manager Basics of Networking (Vlan concepts, Analyzing switch logs, Jumbo frames, flow control etc) Should be ready to work in rotational shifts and on weekends. Good written and verbal communication skills (Mandatory). Zeal for going the extra mile to solve customer issues. Good to have: Understanding of Rest API, Powershell, databases like SQL/Postgress, etc. Operating Systems Knowledge – administration and support on VMware, Windows HyperV, Linux/Microsoft/VMware VCP or equivalent experience/certification will be an added advantage Must achieve excellent customer satisfaction Take ownership and work with high productivity and efficiency. Support other team members and seek their advice to make decisions on complex issues. Deliver trainings when required. Education and Experience Required: Bachelor’s degree in Engineering (or Equivalent). Experience: Minimum 3+ years of experience in Enterprise Servers and Linux technical support Relevant certification on the latest track like RHCSA / RHCE will be an added advantage. Flexible to work in 24X7 support environment ITIL certification is an added advantage Additional Skills: Accountability, Accountability, Action Planning, Active Learning (Inactive), Active Listening, Bias, Business Growth, Business Planning, Coaching, Commercial Acumen, Creativity, Critical Thinking, Cross-Functional Teamwork, Customer Experience Strategy, Customer Solutions, Data Analysis Management, Data Collection Management (Inactive), Data Controls, Design Thinking, Empathy, Follow-Through, Growth Mindset, Intellectual Curiosity (Inactive), Long Term Planning, Managing Ambiguity {+ 5 more} What We Can Offer You: Health & Wellbeing We strive to provide our team members and their loved ones with a comprehensive suite of benefits that supports their physical, financial and emotional wellbeing. Personal & Professional Development We also invest in your career because the better you are, the better we all are. We have specific programs catered to helping you reach any career goals you have — whether you want to become a knowledge expert in your field or apply your skills to another division. Unconditional Inclusion We are unconditionally inclusive in the way we work and celebrate individual uniqueness. We know varied backgrounds are valued and succeed here. We have the flexibility to manage our work and personal needs. We make bold moves, together, and are a force for good. Let's Stay Connected: Follow @HPECareers on Instagram to see the latest on people, culture and tech at HPE. #india #operations Job: Services Job Level: Specialist HPE is an Equal Employment Opportunity/ Veterans/Disabled/LGBT employer. We do not discriminate on the basis of race, gender, or any other protected category, and all decisions we make are made on the basis of qualifications, merit, and business need. Our goal is to be one global team that is representative of our customers, in an inclusive environment where we can continue to innovate and grow together. Please click here: Equal Employment Opportunity. Hewlett Packard Enterprise is EEO Protected Veteran/ Individual with Disabilities. HPE will comply with all applicable laws related to employer use of arrest and conviction records, including laws requiring employers to consider for employment qualified applicants with criminal histories.

Category: Administration Main location: India, Karnataka, Bangalore Position ID: J0625-1448 Employment Type: Full Time Position Description: At CGI, we’re a team of builders. We call our employees members because all who join CGI are building their own company - one that has grown to 72,000 professionals located in 40 countries. Founded in 1976, CGI is a leading IT and business process services firm committed to helping clients succeed. We have the global resources, expertise, stability and dedicated professionals needed to achieve. At CGI, we’re a team of builders. We call our employees members because all who join CGI are building their own company - one that has grown to 72,000 professionals located in 40 countries. Founded in 1976, CGI is a leading IT and business process services firm committed to helping clients succeed. We have the global resources, expertise, stability and dedicated professionals needed to achieve results for our clients - and for our members. Come grow with us. Learn more at www.cgi.com. This is a great opportunity to join a winning team. CGI offers a competitive compensation package with opportunities for growth and professional development. Benefits for full-time, permanent members start on the first day of employment and include a paid time-off program and profit participation and stock purchase plans. We wish to thank all applicants for their interest and effort in applying for this position, however, only candidates selected for interviews will be contacted. No unsolicited agency referrals please. Your future duties and responsibilities: Job Title:IoT Developer / Raspberry Pi Specialist Position: Lead Analyst Experience:7+Years Category: IT Infrastructure Main location: Bangalore/Chennai/Hyderabad Position ID:J0625-1448 Employment Type: Full Time We are seeking experienced IoT Developers who specialize in Raspberry Pi 5, HAT modules, IoT sensors, and cloud integrations (AWS). The ideal candidates should have a strong foundation in IoT hardware integration, edge computing, data acquisition from sensors, and real-time data communication between edge devices and cloud platforms Key Responsibilities: Assemble, configure, and deploy Raspberry Pi 5 boards, IoT sensors, and HAT modules. Read, interpret, and utilize data obtained from various IoT sensors (temperature, humidity, motion, cameras, etc.) connected through Raspberry Pi HATs. Develop, test, and deploy Python or other Raspberry Pi-compatible applications to enable edge computing functionalities. Set up and manage network connectivity (Ethernet, Wi-Fi, 5G via HAT) for Raspberry Pi and connected IoT devices. Integrate Raspberry Pi edge devices securely and effectively with AWS cloud services (AWS IoT Core, AWS Lambda, Amazon DynamoDB, AWS TwinMaker, etc.). Ensure robust data transfer, storage, processing, and visualization of IoT data in the cloud. Troubleshoot IoT device communication, connectivity, and performance issues. Document the setup, configurations, coding standards, and processes comprehensively #LI-SA19 Skills: Raspberry Pi What you can expect from us: Together, as owners, let’s turn meaningful insights into action. Life at CGI is rooted in ownership, teamwork, respect and belonging. Here, you’ll reach your full potential because… You are invited to be an owner from day 1 as we work together to bring our Dream to life. That’s why we call ourselves CGI Partners rather than employees. We benefit from our collective success and actively shape our company’s strategy and direction. Your work creates value. You’ll develop innovative solutions and build relationships with teammates and clients while accessing global capabilities to scale your ideas, embrace new opportunities, and benefit from expansive industry and technology expertise. You’ll shape your career by joining a company built to grow and last. You’ll be supported by leaders who care about your health and well-being and provide you with opportunities to deepen your skills and broaden your horizons. Come join our team—one of the largest IT and business consulting services firms in the world.

Location Bangalore, Karnataka, 560100 Category Engineering / Information Technology Job Type Full time Job Id 1186259 No Compute Engineer This role has been designed as ‘Hybrid’ with an expectation that you will work on average 2 days per week from an HPE office. Who We Are: Hewlett Packard Enterprise is the global edge-to-cloud company advancing the way people live and work. We help companies connect, protect, analyze, and act on their data and applications wherever they live, from edge to cloud, so they can turn insights into outcomes at the speed required to thrive in today’s complex world. Our culture thrives on finding new and better ways to accelerate what’s next. We know varied backgrounds are valued and succeed here. We have the flexibility to manage our work and personal needs. We make bold moves, together, and are a force for good. If you are looking to stretch and grow your career our culture will embrace you. Open up opportunities with HPE. Job Description: HPE Operations is our innovative IT services organization. It provides the expertise to advise, integrate, and accelerate our customers’ outcomes from their digital transformation. Our teams collaborate to transform insight into innovation. In today’s fast paced, hybrid IT world, being at business speed means overcoming IT complexity to match the speed of actions to the speed of opportunities. Deploy the right technology to respond quickly to market possibilities. Join us and redefine what’s next for you. What you will do: The candidate provides Operate and Admin support on Compute infrastructure and the Operating system in accordance with contractually established terms and conditions and established technical standards. Provides technical input, solutions, and recommendations to deal pursuit. Engaged in and provides support for transition/ transformation efforts. Provides IT infrastructure and/ or application infrastructure lifecycle technical support, including planning, project management, installation, on- going management/ monitoring/ troubleshooting, and de- installation, following operational policies and processes that are compliant with industry standards (e.g. Information Technology Infrastructure Library (ITIL)). Manages the technical/ service relationship between the company and the customer, and between the company and subcontractors/ vendors. Works with the key customers and/ or internal businesses/ end user representatives (Infrastructure Support Managers, Client Manager and the Account Delivery Manager) to retain customers and build the business. What you will bring: Resolve customer’s issues via the telephone, email or remote sessions. Reproduce issues in-house and responding back in a timely manner. Regular follow ups with customers with recommendations, updates and action plans. Identify and escalate issues in a timely manner to vendor according to Standard Operating Procedures. Leverage internal technical expertise, including peers, mentors, knowledge base, community forums and other internal tools, to provide the most effective solutions to customer issues. Collaborate with other CoE/HW teams in diagnosing and isolating the cause of complex issues. Maintain quality on case documentation, SLA timeframes and operational metrics. Performs within the Productivity Measure of the team (scorecard) Incident Management: Resolve single and cross technology incidents independently. Lead the team members to resolve complex or cross technology incidents. Escalation Management: Identify, manage, and lead technical escalations. Participate in formal Escalation when required to support escalation especially during crisis. Problem Management: Proactively and reactively look for solutions to prevent problems from occurring in team/technology area. Perform Trend and Root cause analysis. Change Management/Implementation: Independently prepare, review, implement, rollback and test plan for change records. Perform risk and impact analysis for changes, May lead or participate in a Change Advisory Board. Patch and Security Management: Apply patch and security changes per policy. Proactively monitor the environment for patch compliance. Analyze patches for compatibility with each customer or internal infrastructure environment. Configuration Management: Ensure Configuration Management Database (CMDB) entries are complete and accurate. Must Have: Broad technical knowledge on HPE ISS solutions – Installing, Configuring & Troubleshooting of C7000 enclosures, HPE Synergy, Virtual Connects, Blade Switches- SAS,Ethernet & FC, ProLiant Blades & Storage Blades Operating Systems Knowledge – Install, configure, administration and troubleshoot RHEL/SUSE(as Bare-Metal OS & as VMs on Hypervisors) and VMware Working knowledge on Redhat/SUSE Linux Troubleshooting OS logs for hardware issues from VM-support, HPSreport, SOSreport, Support-Config etc Knowledge on SAN, NAS technologies (Ethernet / iSCSI, FC, FCOE) Knowledge on DAS Storage & HBAs – Smart Array /RAID, SSDs SAS, SATA etc Disaster Recovery planning and conducting DR tests. Performed routine Performance Analysis, Capacity analysis, security audit analysis reports to customer for necessary planned changes Linux Vulnerability assessment and Mitigation Serviceguard cluster configuration and management on Linux and Integration with Database and ERP Solution Knowledge on Patch deployment solutions – Redhat Satellite , SUSE Manager Basics of Networking (Vlan concepts, Analyzing switch logs, Jumbo frames, flow control etc) Should be ready to work in rotational shifts and on weekends. Good written and verbal communication skills (Mandatory). Zeal for going the extra mile to solve customer issues. Good to have: Understanding of Rest API, Powershell, databases like SQL/Postgress, etc. Operating Systems Knowledge – administration and support on VMware, Windows HyperV, Linux/Microsoft/VMware VCP or equivalent experience/certification will be an added advantage Must achieve excellent customer satisfaction Take ownership and work with high productivity and efficiency. Support other team members and seek their advice to make decisions on complex issues. Deliver trainings when required. Education and Experience Required: Bachelor’s degree in Engineering (or Equivalent). Experience: Minimum 3+ years of experience in Enterprise Servers and Linux technical support Relevant certification on the latest track like RHCSA / RHCE will be an added advantage. Flexible to work in 24X7 support environment ITIL certification is an added advantage Additional Skills: Accountability, Accountability, Action Planning, Active Learning (Inactive), Active Listening, Bias, Business Growth, Business Planning, Coaching, Commercial Acumen, Creativity, Critical Thinking, Cross-Functional Teamwork, Customer Experience Strategy, Customer Solutions, Data Analysis Management, Data Collection Management (Inactive), Data Controls, Design Thinking, Empathy, Follow-Through, Growth Mindset, Intellectual Curiosity (Inactive), Long Term Planning, Managing Ambiguity {+ 5 more} What We Can Offer You: Health & Wellbeing We strive to provide our team members and their loved ones with a comprehensive suite of benefits that supports their physical, financial and emotional wellbeing. Personal & Professional Development We also invest in your career because the better you are, the better we all are. We have specific programs catered to helping you reach any career goals you have — whether you want to become a knowledge expert in your field or apply your skills to another division. Unconditional Inclusion We are unconditionally inclusive in the way we work and celebrate individual uniqueness. We know varied backgrounds are valued and succeed here. We have the flexibility to manage our work and personal needs. We make bold moves, together, and are a force for good. Let's Stay Connected: Follow @HPECareers on Instagram to see the latest on people, culture and tech at HPE. #india #operations Job: Services Job Level: Specialist HPE is an Equal Employment Opportunity/ Veterans/Disabled/LGBT employer. We do not discriminate on the basis of race, gender, or any other protected category, and all decisions we make are made on the basis of qualifications, merit, and business need. Our goal is to be one global team that is representative of our customers, in an inclusive environment where we can continue to innovate and grow together. Please click here: Equal Employment Opportunity. Hewlett Packard Enterprise is EEO Protected Veteran/ Individual with Disabilities. HPE will comply with all applicable laws related to employer use of arrest and conviction records, including laws requiring employers to consider for employment qualified applicants with criminal histories.

Location: Hyderabad, Telangana Time type: Full time Job level: Senior Associate Job type: Regular Category: Information Technology ID: JR113807 About us We are the leading provider of professional services to the middle market globally, our purpose is to instill confidence in a world of change, empowering our clients and people to realize their full potential. Our exceptional people are the key to our unrivaled, inclusive culture and talent experience and our ability to be compelling to our clients. You’ll find an environment that inspires and empowers you to thrive both personally and professionally. There’s no one like you and that’s why there’s nowhere like RSM. The Unified Communications Engineer Senior is a member of the RSM technical services group and is responsible for the strategic operational support of our Unified Communications Voice Systems and Collaboration tools. The engineer will work closely with IT management and other functional groups to design, develop, deploy, and administer the company's enterprise collaboration services. Individual must have excellent written and oral communication skills, and be able to work, collaborate and coordinate between technical and non-technical people within the company. Must have a team oriented attitude, solid interpersonal skills and be self-driven and accountable. Design, deploy, and support enterprise-grade voice and collaboration solutions leveraging Microsoft Teams Phone System, several PSTN providers across multiple countries including direct routing and operator connect, as well as Cisco Webex Contact Center and Cisco Cloud Voice systems, providing Tier 3 support, advanced troubleshooting, and strategic guidance. Act as a technical lead and subject matter expert for UC initiatives, collaborating with infrastructure, network, and security teams to ensure performance, security, and compliance Develops and maintains technical standards, procedures and techniques for the resolution of voice service issues to ensure maximum system availability and performance levels. Provides guidance to team members Lead or support platform migrations, upgrades, and integrations, aligning technical decisions with business goals. Participates in incident management, root cause analysis, and problem resolution. Participation in scheduled and unscheduled system maintenance including change management, on-call and off-hour systems support Other duties as assigned. EDUCATION/CERTIFICATIONS (MUST NOTE REQUIRED OR PREFERRED) Bachelor’s degree in a related field or equivalent experience TECHNICAL/SOFT SKILLS (MUST NOTE REQUIRED OR PREFERRED) Cisco Webex Contact Center Microsoft Teams Voice Experienced in SIP trunk design, deployment, and support Experienced in configuration and support of Cisco routers and switches Experienced in network protocols, TDM and Ethernet data and voice circuits EXPERIENCE (MUST NOTE REQUIRED OR PREFERRED) 7+ years of experience supporting enterprise Unified Communications solutions. Hands-on expertise with Microsoft Teams Voice, including Direct Routing, SBC configuration, dial plans, and policy management. Strong experience with Cisco Webex Contact Center (Cloud) and Cisco Cloud Voice Solid understanding of VoIP protocols (SIP, RTP), call flow analysis, and QoS best practices. Familiarity with security, compliance, and data retention policies related to voice services. Experience with PowerShell and/or other scripting tools for automation and administration. Excellent written and verbal communication skills, with a strong attention to detail. PREFERRED REQUIREMENTS Microsoft and Cisco certifications (e.g., MS-720, MS-700, CCNP Collaboration). Experience integrating UC with ServiceNow or other ITSM platforms. Exposure to AI-powered voice solutions, analytics platforms, or transcription technologies. Knowledge of Azure AD, identity and access policies, and conditional access related to UC tool. LEADERSHIP SKILLS (MUST NOTE REQUIRED OR PREFERRED) At RSM, we offer a competitive benefits and compensation package for all our people. We offer flexibility in your schedule, empowering you to balance life’s demands, while also maintaining your ability to serve clients. Learn more about our total rewards at https://rsmus.com/careers/india.html. RSM does not tolerate discrimination and/or harassment based on race; colour; creed; sincerely held religious beliefs, practices or observances; sex (including pregnancy or disabilities related to nursing); gender (including gender identity and/or gender expression); sexual orientation; HIV Status; national origin; ancestry; familial or marital status; age; physical or mental disability; citizenship; political affiliation; medical condition (including family and medical leave); domestic violence victim status; past, current or prospective service in the Indian Armed Forces; Indian Armed Forces Veterans, and Indian Armed Forces Personnel status; pre-disposing genetic characteristics or any other characteristic protected under applicable provincial employment legislation. Accommodation for applicants with disabilities is available upon request in connection with the recruitment process and/or employment/partnership. RSM is committed to providing equal opportunity and reasonable accommodation for people with disabilities. If you require a reasonable accommodation to complete an application, interview, or otherwise participate in the recruiting process, please send us an email at careers@rsmus.com.

What will you contribute: As an Expert Network Engineer, you will manage and troubleshoot Azure cloud environments, including vNets, UDRs, NSGs, and ALBs. Your role involves installing, configuring, and maintaining network and data communications equipment such as routers, switches, firewalls, and VPN concentrators. You will monitor network performance, conduct capacity planning, and ensure synchronization between Production and DR environments. Additionally, you will provide tier 2 support, maintain technical documentation, and participate in project teams to implement detailed plans. Occasional on-call duties and travel may be required. Your deliverables & responsibilities: Understand the various concepts of Azure cloud environments like vNets, UDRs, NSG, ALBs, and be able to configure and troubleshoot all levels of the same using Microsoft-provided tools and interfaces. Install, configure, monitor and manage all network and data communications equipment including all hubs, routers/switches, intrusion detection systems, VPN concentrators, load balancers, SDWAN connections, and firewalls. Provide ongoing monitoring of all networks and data communications facilities using approved network management tools and including monitoring access to Telecommunication carriers and managing the connection equipment. Perform regular capacity planning to ensure network performance will meet anticipated requirements, monitor capacity, and work with carriers to adjust capacity as needed. Responsible for internet access including installing, configuring, maintaining routers and firewalls, configuring routing protocols, and monitoring performance of the same. Troubleshoot all network problems; open issues in the Problem and Change Management databases, record resolution; provide tier 2 support; ensure all issues are resolved as per published service levels or escalate as necessary. Provide maintenance to the equipment as required. Maintain all technical configuration documents and review/update processes and procedures, and maintain appropriate documentation. Provide weekly updates of work activity to the Manager, Network Operations and/or Director of Network Operations Participate on project teams working with all Infrastructure teams or Network Engineers/Architects; take high level plans developed by engineers/architects and develop a detailed plan broken down by task for implementation. Work with internal and external customers to convert requirements into actionable change requests for implementation. Occasional On call 24 duties; on occasion will have to be at the office outside of normal working hours; occasional travel may be necessary. Develop and keep current a personal professional education plan with the assistance of your supervisor/manager. Maintain synchronization in network infrastructure between Production & DR environments for payments products, ensure changes /configurations implemented in Production are simultaneously implemented in DR environment. SOP creation as per Industry best standards for week long True Failovers from Network perspective, ensuring Customer can run their business seamlessly from DR environment for a week. Required Skills & Experience: Must Have : 9+Yrs Hands on experience of Cloud networking principals in Azure Functional knowledge of networking and data communication fundamentals including Ethernet and routing protocols (TCP/IP, Routing Protocols, etc) Functional knowledge of SDWan Functional knowledge of internetworking standards Functional knowledge of network management tools Knowledge of OSI protocol model

Company Description Renesas is one of the top global semiconductor companies in the world. We strive to develop a safer, healthier, greener, and smarter world, and our goal is to make every endpoint intelligent by offering product solutions in the automotive, industrial, infrastructure and IoT markets. Our robust product portfolio includes world leading MCUs, SoCs, Analog and power products, plus Winning Combination solutions that curate these complementary products. We are a key supplier to the world’s leading manufacturers of electronics you rely on every day; you may not see our products, but they are all around you. Renesas employs roughly 21,000 people in more than 30 countries worldwide. As a global team, our employees actively embody the Renesas Culture, our guiding principles based on five key elements: Transparent, Agile, Global, Innovative, and Entrepreneurial. Renesas believes in, and has a commitment to, diversity and inclusion, with initiatives and a leadership team dedicated to its resources and values. At Renesas, we want to build a sustainable future where technology helps make our lives easier. Join us and build your future by being part of what’s next in electronics and the world. Job Description We are seeking a diligent Verification leader to join our team at Renesas. The Verification engineer will be responsible for performing various verification tasks including Test Plan creation, Testcase creation, Coverage closure, Requirements traceability and Gate Level Simulation. They will also review system requirements and track quality assurance metrics. Ultimately, the role of the Verification Engineer is to ensure that our products, applications, and systems work correctly, safely & securely. Responsibilities Drive Verification R&D team driving technical execution and best in class methodologies used in the design of advanced microcontrollers and microprocessors. Work closely with system architects to understand high level specifications to be able to verify them. Work with various EDA vendors to deploy next generation tools Build strong collaboration with other R&D teams such as RTL, DFT, digital IP, PD, Design Enablement, Emulation, and Validation to achieve project milestones Promote continuous improvement to design techniques to ensure ‘Zero Defect’ chips Collaborate with SME’s and key leaders in architecture, systems, emulation, SoC design, software, physical design, and IP teams developing key technical networks to influence overall design improvements and verification methodologies Responsible for developing detailed Technical SoC verification execution plans, progress reports and tracking milestones, managing technical risks, and providing mitigations to meet schedule quality and costs commitments. Communicate across technical teas as well as provide executive level presentations Complete ownership for SoC verification quality sign-offs ensuring all deliverables for team hand-offs. Drive best in class verification methodologies collaborating with global internal and external SME’s and developing adoption and compliance processes. Including, driving key innovation strategies which significantly impact efficiency and quality for overall R&D and ROI. Qualifications Degree in Electrical/Electronic Engineering, Computer Engineering or Computer Science At least 10 years of experience in SoC Verification domains and have working knowledge of industry standard EDA toolkits. Proven experience in testbench design and development using UVM methodology for IP/Subsystem and SOC. Experience in Microcontroller and Microprocessor architecture & Interconnect Experience in protocols like AHB/AXI/CHI, Memory (ROM, RAM, Flash, LPDDR5/5x) and memory controllers. Advanced knowledge of Verilog, System Verilog, C/C++, Shell. Good knowledge in scripting like Perl, TCL or Python is a plus High proficiency in Metric Driven Verification concepts, functional and code coverage. Expertise in directed and constrained random methodologies. Good knowledge of formal verification methodologies and assertions. Experience with debugging of designs pre- and post-silicon, in simulation and on the bench. Excellent written and verbal communication skill. Must have worked on complex, multi-core SoC’s with extensive interconnects and a large range of peripherals. Fair domain knowledge of clocking, system modes, power management, debug, security and other architectures is a must. Any of following experience would be a plus: High Speed Peripherals like DDR, PCIe, UCIe, Ethernet, GPU, VPU (Video Processing Unit); NIC/Flex NOC interconnect; Flash memory subsystems. Additional Information Renesas is an embedded semiconductor solution provider driven by its Purpose ‘ To Make Our Lives Easier .’ As the industry’s leading expert in embedded processing with unmatched quality and system-level know-how, we have evolved to provide scalable and comprehensive semiconductor solutions for automotive, industrial, infrastructure, and IoT industries based on the broadest product portfolio, including High Performance Computing, Embedded Processing, Analog & Connectivity, and Power. With a diverse team of over 21,000 professionals in more than 30 countries, we continue to expand our boundaries to offer enhanced user experiences through digitalization and usher into a new era of innovation. We design and develop sustainable, power-efficient solutions today that help people and communities thrive tomorrow, ‘ To Make Our Lives Easier .’ At Renesas, You Can Launch and advance your career in technical and business roles across four Product Groups and various corporate functions. You will have the opportunities to explore our hardware and software capabilities and try new things. Make a real impact by developing innovative products and solutions to meet our global customers' evolving needs and help make people’s lives easier, safe and secure. Maximize your performance and wellbeing in our flexible and inclusive work environment. Our people-first culture and global support system, including the remote work option and Employee Resource Groups, will help you excel from the first day. Are you ready to own your success and make your mark? Join Renesas. Let’s Shape the Future together. Renesas Electronics is an equal opportunity and affirmative action employer, committed to supporting diversity and fostering a work environment free of discrimination on the basis of sex, race, religion, national origin, gender, gender identity, gender expression, age, sexual orientation, military status, veteran status, or any other basis protected by law. For more information, please read our Diversity & Inclusion Statement.

DIGITAL & FPGA design engineer shall provide technical support in the domains of design and development, realizing & testing of signal conditioning, digital interfaces, control electronics, handling and implementation of signal processing and communication system design as well as implementing designs on FPGAs through automatic HDL code generation and verification techniques. Design Development digital designs/ FPGA programming to implement algorithms for image capture, data processing /analysis and data transmission in an embedded real-time control environment utilizing the latest FPGA technologies. Good understanding of digital, analog or radio frequency circuits, components, and subsystems Designs, knowledge of Performing preliminary and detailed analyses/simulations on Analog & Digital or mixed signal Interfaces. Responsibilities include specification generations, architecture/micro-architecture definition hands-on implementation work for every aspect of ASIC/FPGA design, working closely with the system engineers and ASIC/FPGA design implementations and verification. Delivery of expert level technical support in the resolution of FPGA application issues at all levels of realization of designs, The proactive aspects of the position will require participation in development projects, possibly as part of an international, cross organizational team and may include the generation of collateral and reference designs. Ownership of all aspects of the design verification of the FPGA chips and/or its functional blocks,design tools and its verification equipment. Should Support the design, development and testing, including upgrades, parts reliability requirements, failure analysis/corrective action investigations, special laboratory tests, performance evaluations, and design audits of in-house. Intend to work closely with FW and SW Engineers to test and verify electrical interfaces and protocols between the FPGA and embedded system devices Working knowledge in System Verilog/UVM environment platforms and be responsible for generating FPGA verification plan, verification matrix and coming up with verification environments for test and verification of flight FPGA code/modules. Relevant Bachelors or Masters Degree in Electronics Design, Embedded Electronics, Electronics & communication Engineering, Electrical Engineering.

FPGA design engineer will take part in the design domains of signal processing and data processing, image processing, other high-speed and control applications, implementing these functions on high-density state of the art FPGAs. Work may include specifying, architecture/microarchitecture definition and hands-on implementation work for every aspect of FPGA design, working closely with the system, software, and FPGA design and verification, guide and mentor juniors in the areas and Delivery of expert level technical support in the resolution of FPGA application issues at programming level. In addition to the FPGA implementation, the engineers are expected to understand subsystem/algorithm level behaviour of such designs and be able infer the necessary hardware design/resources necessary for a given subsystem level specification. Work may involve HDL level coding/verification/testing and/or System C coding levels and taking ownership of all aspects of the design verification of the FPGA chips and/or its functional blocks. Examples of possible micro streams of work: CCD/CMOS Image array readout at high speeds Formatting such data and serial or parallel transmission of the same to other subsystems Implementation of complex image or signal processing algorithms Implementation of i/o rich control functions to interface a large number of subsystems to central controllers. Working closely with microcontroller programmers, instantiation of controllers with sequential code inside FPGAs etc mapping algorithms and standards (PCIe, NVMe, SATA,USB, Ethernet, TCP/IP, TCP/IP off load engine (TOE), SERDES, LVDS, and Memory Controllers DDR2/DDR3 ) to hardware and architecture/system design trade-offs standard bus protocols, including I2C, SPI, USB, PCIe. Candidates should preferably have good quantitative aptitude and understand analy Content coding like Verilog/VHDL, or System C or equivalent, exposure to complex/high density FPGAs and FPGA-SoCs Familiarity with Matlab and Simulink Vitis Unified Software Platform - Xilinx or similar Bachelors in Electronics or equivalent stream and a minimum of 10 years experience or Masters Degree in a related specialization with a minimum of 8 years experience in Electronics Design/Embedded Electronics, out of which the most recent 6 years must have been in state of the art high density FPGA environments. FPGA Design Engineer Azista BST Aerospace Plot No. 16, Sanand Land Industrial Estate Corporation, Sarkhej-Sanand Road, Ularia, Sanand, Ahmedabad, Gujarat, India - 382 210. Registered Office Sy.No 80-84, Melange Towers, 4th Floor, C Wing, Patrika Nagar, Madhapur, Hyderabad, Telangana, India - 500 081.

Job Area: Engineering Group, Engineering Group > Hardware Engineering General Summary: Verification & Validation team is currently looking for self-motivated engineers who will perform ARM or DSP based SOC Pre-Si and Post Si validation including system level validation and debug. The ideal candidate should leverage his knowledge and experience to provide leadership, technical guidance, and execution of silicon validation of ARM or DSP based multiple SOC projects and platforms Experience in SoC pre/post silicon validation. ARM based System-On-Chip Pre-Silicon emulation and Post-Silicon ASIC Validation experience related to board bring up and debug. Perform system level validation and debug Debug experience with Lauterbach Trace32 environment. Test equipment like Logic analyzer, Oscilloscope and Protocol analyzers. Embedded software development of low level hardware drivers in C language. Working experience related to one or more of the following is required. ARM/DSP Processors/USB/PCIE, Ethernet Minimum Qualifications: Bachelor's degree in Computer Science, Electrical/Electronics Engineering, Engineering, or related field and 2+ years of Hardware Engineering or related work experience. OR Master's degree in Computer Science, Electrical/Electronics Engineering, Engineering, or related field and 1+ year of Hardware Engineering or related work experience. OR PhD in Computer Science, Electrical/Electronics Engineering, Engineering, or related field. 2-6yrs experience