96 Drawings Jobs - Page 2

As a Manufacturing Process Engineer at our company, you will be responsible for installing and qualifying new process equipment, troubleshooting day-to-day manufacturing issues, and implementing system improvements to enhance throughput, yield, and product performance. Your role will require process or equipment engineering experience in thin-film deposition processes or thermal processing in the semiconductor/glass industry. You should have a demonstrated knowledge of PLC and Controls, Vision system knowledge, Statistical Data Analysis, Metrology, Design of Experiments, Statistical Process Control, and various problem-solving methods. In addition, you must possess excellent problem-solving skills, proficiency in generating manufacturing documentation, understanding of manufacturing processes, and the capability to train operators, technicians, and new engineers. Strong communication skills, both oral and written, are essential for this role. To be considered for this position, you should hold an engineering degree in a technical discipline with at least 3 years of engineering experience in a manufacturing setting. Knowledge of General Electronics, General Mechanical Systems, and Robust Engineering principles is desirable. As part of your responsibilities, you will develop, improve, and document solar module manufacturing processes, work on new process development, design experiments, and address production, equipment, and process issues. You will also be involved in equipment installation and qualification, data collection, communication with internal associates and suppliers, and continuous improvement activities. Physical requirements for this role include the ability to sit, stand, walk, climb stairs, lift objects, and wear personal protective equipment. You should have good vision, be able to comply with safety standards, and travel domestically and internationally as needed. If you are a proactive, detail-oriented engineer with a passion for process optimization and product performance, we encourage you to apply for this position and be part of our dynamic team located at Plot No.A-1/1 SIPCOT Industrial Park, Sriperumbudur, Tamil Nadu, IN.,

• We have an urgent job opening for Diploma / B Tech - Mechanical • Experience in sheet metal fabrication industries • MIG Welding, Fabrication of sheet metal • Should be able to handle Independently supervising activities on the shop floor Required Candidate profile * 2 to 4 years experience in any manufacturing company, * Person should be able to handle the Team * Should have technical knowledge of fabrication activities * Immediate Joiner * Male Candidate only

As a Traffic Engineer, your main responsibilities will include performing Junction Calculations or Pedestrian Analysis based on provided requirements and sample spreadsheets. You will also be required to conduct Swept Path Analysis using specified vehicle libraries for various projects. Additionally, creating Drawings and Layout Designs for reports and different tasks will be part of your daily tasks. Moreover, you will be responsible for preparing Temporary Traffic Management Drawings according to specific project requirements. To qualify for this role, you must hold a degree in Civil/Traffic/Transport discipline and possess a minimum of 5 years of practical experience in traffic engineering, road/layout design. Familiarity with the Highway Capacity Manual, UK/HK standards is essential. Previous work experience as a Civil Engineer, Traffic Engineer, Highway Engineer, or a similar role is required. Proficiency in MS Excel, Bentley Microstation, AutoCAD software with Autotrack is necessary. Being a Chartered Engineer (MICE/MCIHT/MCILT) is preferred. A good command of written and spoken English as well as strong communication and presentation skills are also important for this role.,

1Study tender specification and coordination with tender department for the final approval. 2 Study architectural drawing and understanding requirement/preparing shop drawing 3 Verifing & checking concept drawing working (2D line drawing, 3D drawing, as requirement) data recive from estimation department. 4 Area calculation (BOQ) to calculate the area of BOQ as per drawing (need) 5 Shop drawing preparation (1st cut, comments updation, final submission) initiate the shop drawing for find comments & correction for find submission to client 6 Coordination and input to structural engineer for structral design calculation to get. 7 Structural calculation report checking 8 Material sizes,Qty calculation & find material order submission billof materials. 9 Material approvals and documentation MARMAT approval 10 Site visit and sitesurvey 11 To prepare working drawings for siteteam (As requirement) 12 To preapare fabrication drawings 13 Optimisation of material to calculate wastage of material assignment approval survey 14 Coordination with tender department for any changes from clients as per site condition 15 Coordination with site team, contractor to explain drawing and BOM 16 Coordinate with shop floor for production and fabrication department tp explain drawings of fabrication & BOM 17 Coordination with store & purchase for material & BOM related query 18 Coordination with planning, production & project shedule 19 Coordination with billing department BOM as built drawing 20 Meeting with client/architect 21 Attend internal weekly project review meetin 22 Attend internal weekly design review meeting 23 Preparation of daily progress report (DPR)

2+Yrs of exp in CNC Exp in CAD Tools(Solidworks, Autocad) Skilled in tool costing,vendor management & regrinding Manage, track tool inventory & usage Monitor tool performance Maintain master tool list, drawings and datasheets Tool management software

As a Geotechnical Engineer, you will be responsible for various key performance areas and activities to ensure the successful completion of technical tasks and design projects. Your main responsibilities include: Visiting sites and preparing techno-commercial proposals within the specified time frame. This involves preparing and reviewing designs, drawings, Bill of Quantities (BoQ), specifications, rate analysis, and construction methodology to meet project requirements efficiently. Optimizing systems and ensuring efficient turnaround time for proposals to enhance project delivery timelines. Reviewing, modifying, and creating technical documents for the Indian subsidiary of the sector. This includes revising technical data sheets, tender specifications, training materials, and other relevant documents after obtaining approval from the Head of Department (HOD) on a monthly basis. Studying soil investigation reports, input data, loadings, and drawings provided by customers to develop designs, drawings, quantities, and other project-related documentation accurately. Ensuring that project specifications with suitable Pre-Qualification (PQ) criteria are included in tender specifications during the preparation of Detailed Project Reports (DPR). Continuously updating information on market scenarios and competitor knowledge to stay informed about industry trends and developments. Populating Smart Terms & Conditions to streamline project processes and contractual agreements effectively. Your role as a Geotechnical Engineer is crucial in contributing to the successful completion of projects by applying your technical expertise, attention to detail, and proactive approach to project management.,

As a Validation Lead at our organization, you will be responsible for ensuring the accuracy and quality of both modular and services scope of work. While our dedicated vendors handle modulars nationwide, services are provided through a carefully selected marketplace of Livspace-certified contractor partners and an in-house contracting team. Your role will involve the following key responsibilities: - Validating drawings, Bill of Quantities (BOQ), and site conditions. - Understanding drawings from various disciplines such as Modular & Non-modular Kitchen, Wardrobe Systems, furniture, civil, electrical, plumbing, etc., and verifying quantities in the BOQ. - Identifying design discrepancies and anticipating potential execution risks. - Highlighting any missing line items in the BOQ. - Finalizing the BOQ after resolving design discrepancies and conducting thorough validation at the site. - Delivering error-free validation reports within the specified Service Level Agreement (SLA). External Skills And Expertise required for this role include: - Diploma/B.Tech. in Civil Engineering or Architecture. - 3+ years of contracting experience, with at least 1 year in execution and 2 years in Quantity Surveying, specifically in residential or commercial projects. - Ability to assess design feasibility, visualize on-site conditions, and anticipate execution risks. - Proactive approach and strong prioritization skills. - High level of ownership and accountability. - Strong aptitude for learning and development. - Effective communication skills both verbally and in writing. If you meet the qualifications and are eager to contribute to a dynamic team, we welcome your application for the Validation Lead position.,

The main responsibilities of this role include: - Coordinating with the Procurement team for the submission of TDS of BOQ items to customers/consultants and obtaining approvals. - Providing guidance to the Draftsman for the preparation of drawings in 2D/3D according to site requirements, submitting them to customers, and obtaining approvals. - Collaborating with the Site Engineer/Draftsman to determine the actual quantity requirements of BOQ items through drawings/site visits. - Carrying out design work for projects and sharing the information with the execution team to ensure engineering progress. - Conducting equipment selection and exploring deviations from tender conditions to achieve additional savings through value engineering. - Maintaining constant communication with clients for input drawings, clearances, and approvals. - Holding periodic meetings with clients/consultants to address issues, establish rapport, ensure customer satisfaction, and strive to improve the CSI Score. - Addressing MEP space coordination and implementing MEP design coordination & MEP services integration if it is part of the scope. - Developing and maintaining relationships with major Project Management Consultants (PMC), consultants, and customers by highlighting engineering as a differentiator. Key Responsibilities include: - MEP - Design - Drawings - BOQ,

As a candidate for this position, you are expected to have a good knowledge of finishing materials, works, and methodology. You should also possess a strong command on Bill of Quantities (BOQ), drawings, and the ability to coordinate with other services drawings. Your responsibilities will include checking activities related to Civil and Finishing work, daily monitoring of day-to-day activities, and resolving issues within prescribed time durations. Additionally, you will be required to generate reports, assist the site Engineer in closing snag points and ongoing works, and implement Hazard Identification, Risk Assessment, and Control in consultation with the site manager and Safety officers. Furthermore, you will be responsible for preparing bar bending schedules and Civil work quantities take off. To qualify for this role, you must hold a Bachelor's Degree in Civil Engineering and have approximately 10 to 13 years of relevant experience. Proficiency in MS Excel is a must, while knowledge of AutoCAD is considered a plus. Prior experience working with a Real Estate Developer will be an advantage.,

Expertise in industrial shed and warehouse construction, fabrication work, detailed fabrication shop drawings, BOQ & BOM preparation. Analysis experience Software Proficiency: AutoCAD, Excel Experience in Analysis and detailed design work

As a skilled professional, you will be responsible for ensuring the quality of installation at Project Sites. This includes conducting equipment testing to assess performance in accordance with design and specifications. Your role will also involve overseeing the smooth handing-over of projects, ensuring all documentation, drawings, manuals, measurements, test reports, and test certificates are completed and delivered as required. Your attention to detail and commitment to quality will be essential in meeting project objectives effectively.,

The role involves installing and qualifying new process equipment, as well as troubleshooting day-to-day manufacturing issues on the production line promptly. You will be responsible for addressing tool down problems, yield and quality issues, and implementing actions to prevent reoccurrence. Moreover, you will identify and implement system improvements to enhance throughput, yield, and product performance goals. Ideally, you should possess process or equipment engineering experience in thin-film deposition processes like Magnetron Sputtering, CVD, evaporation, or thermal processing in the semiconductor/glass industry. Proficiency in PLC and Controls, Vision system knowledge, Statistical Data Analysis, and problem-solving skills are essential. Additionally, you should be adept at Metrology, writing complete manufacturing documentation, applying Design of Experiments, and using Statistical Process Control methods. Your role will involve structured problem-solving methods such as DMAIC, 5-Why, and fishbone analysis. You should have a good understanding of manufacturing processes, FMEAs, and the ability to train operators, technicians, and new engineers. Excellent communication skills, both oral and written, are crucial for this position. The successful candidate will hold an engineering degree in a technical discipline with at least 3 years of engineering experience in a manufacturing environment. Desired skills include knowledge of General Electronics, General Mechanical Systems, and applying Robust Engineering principles to develop and implement processes effectively. Key responsibilities include developing, improving, and documenting solar module manufacturing processes, working with the development team to incorporate manufacturing requirements, and conducting experiments to establish process windows. You will be responsible for solving production, equipment, and process issues, evaluating, installing, and qualifying new equipment, and conducting planned process experiments. Furthermore, you will collect and analyze data, interface with internal associates and supplier representatives, maintain effective communication with production associates and engineers, and provide training where necessary. Other responsibilities include championing continuous improvement activities, mentoring junior engineers and technicians, developing Process Control Plans and Preventive Maintenance Plans, and adhering to safety procedures and good housekeeping standards. This role may require domestic and international travel and involves physical requirements such as sitting, standing, walking, climbing stairs, and lifting objects up to 27 pounds. The ability to wear personal protective equipment, including a respirator, is essential. Overall, the successful candidate will work with minimal supervision, ensuring compliance with safety standards and procedures at all times. This is a full-time position based at Plot No.A-1/1 SIPCOT Industrial Park, Sriperumbudur, Tamil Nadu, 602105, IN, with a normal shift work schedule.,

The main responsibilities of this role include installing and qualifying new process equipment, troubleshooting day-to-day manufacturing issues, and identifying system improvements to enhance throughput, yield, and product performance. You will be required to have experience in thin-film deposition processes or thermal processing in the semiconductor/glass industry. Additionally, you should possess knowledge of PLC and Controls, Vision systems, Statistical Data Analysis, Metrology, Design of Experiments, Statistical Process Control, and manufacturing processes. In terms of skills, you must have excellent problem-solving abilities, proficiency in writing manufacturing documentation, and the ability to apply structured problem-solving methods. You should also be capable of training operators, technicians, and new engineers. Strong communication skills, both oral and written, are essential for this role. The ideal candidate will have an engineering degree in a technical discipline with at least 3 years of experience in a manufacturing environment. Desirable skills include knowledge of General Electronics, General Mechanical Systems, and Robust Engineering principles. You will be responsible for developing, improving, and documenting solar module manufacturing processes, working with the development team, and conducting experiments to establish manufacturing process windows. Other responsibilities include solving production, equipment, and process problems, evaluating and qualifying new equipment, collecting and analyzing data, maintaining effective communication with internal associates and suppliers, and providing training to engineers and production associates. You will also be involved in continuous improvement activities, developing Process Control Plans and Preventive Maintenance Plans, and adhering to safety procedures and housekeeping standards. This role may require domestic and international travel. Physical requirements include the ability to sit, stand, walk, climb stairs, lift up to 27 pounds, and use hands to handle objects. Good vision, compliance with safety standards, and the ability to wear personal protective equipment are essential. Associates working on the production floor may be required to wear a respirator, which is a condition of employment. Overall, the Plant MFG Engineering role at Plot No.A-1/1 SIPCOT Industrial Park, Sriperumbudur, Tamil Nadu, 602105, IN, involves a wide range of responsibilities related to manufacturing processes, equipment, and product performance.,

Independently prepared and revised architectural sanction drawing sets for large-scale residential and mixed-use projects ensuring full compliance with UDCPR and municipal guidelin es. Developed detailed area statements including FSI calculations, BUA utilization, and premium FSI assessments to support project feasibility studies and internal design decisi ons. Managed the preparation and submission of EC (Environmental Clearance) drawings, coordinating inputs from environmental, trafic, and structural consultants, and aligning them with MOEF submission form

Assisted in the preparation of site plans, elevations, sections and details. Assisted senior architects in creating CAD drawings from Sketches and hand-drawn drafts. Developed AutoCAD drawings for residential and commercial projects. Performed site surveys to collect data regarding existing conditions onsite. Produced high quality renderings of proposed designs using Lumion software. Created 3D models of proposed buildings and structures using Sketchup software. Created three-dimensional and interactive representations of designs, used computer- assisted design software. Interested candidates can share their resume on recruiter4@kushalengineers.com Connect on - 022-41556171 Only WP - 8108797259

As a bending machine operator, your primary responsibilities will include setting up and running the bending machine according to specifications. You will need to possess strong skills in reading drawings and bending techniques to ensure accurate and precise results. It is crucial to adhere to the production plan schedule and prioritize quality in all completed tasks. To excel in this role, you must have prior experience working on SheetMetal projects and be familiar with operating CNC Bending machines. Proficiency in interpreting technical drawings is essential to meet the job requirements effectively. This is a full-time position with benefits such as provided meals, leave encashment, and access to Provident Fund. The work schedule may involve morning shifts and rotational shifts, offering a yearly bonus as an additional incentive. Applicants should be willing to commute or relocate to Irungattukottai, Tamil Nadu, to fulfill the job requirements. While a Diploma is preferred for educational qualifications, having a minimum of 4 years of total work experience in a relevant field is advantageous. Join our team as a bending machine operator and contribute to our production processes with your technical expertise and dedication to quality and efficiency.,

The job involves conducting incoming, in-process, and final inspections as per the established procedures. You will be responsible for managing the calibration of measuring instruments, following control plans and process control sheets, and interpreting technical drawings. Identifying opportunities for improvement such as kaizen and Poka Yoke will be part of your responsibilities. Additionally, responding to quality complaints and ensuring timely resolution is essential. This is a full-time position with benefits including cell phone reimbursement and Provident Fund. The work schedule is day shift with a yearly bonus. The work location is on-site, and the expected start date for this position is 25/03/2025.,

As an ITI professional in Grinderman, Milling Man, Turner, Machinist, or Fitter trade, you should possess experience working in a Tool Room shop. Your role will require knowledge of drawings, tolerance, fits, and machining. This position is full-time and permanent, with day shift schedules. In this role, you will have benefits such as leave encashment and Provident Fund, along with the opportunity for a performance bonus. The ideal candidate should have a total work experience of 5 years. The work location is in person, and the application deadline is 30/09/2024, with an expected start date of 09/08/2024.,

What are we looking for We are seeking a diligent and precise Deputy Manager / Assistant Manager - Mechanical Design. The ideal candidate will be responsible for the timely and error-free creation of drawings for equipment, line layouts, foundation layouts, and bills of materials, with a strong focus on continuous furnaces and heavy engineering. Job Purpose: To ensure steady & timely completion of drawings of equipment. To prepare line layouts, foundation layouts, and assignments for structure and civil drawings. To prepare assemblies in 3D, and generate assembly and detail drawings. To prepare bills of materials for assemblies & sub-assemblies. Key Result Areas: Timely completion of drawings. Drawings and BOMs made with very less or no errors. Self Development. Key Responsibilities: Planning of drawings according to the requirement. Timely completion of drawings. Prepare the Line Layouts, foundation layouts using the available inputs. Identification of critical problems and work out solutions within specified time frames. Ensuring errorless drawing generation. Coordinate with the team for relevant inputs in the generation of layouts / drawings. Miscellaneous: Ensures compliance with quality, safety & environmental standards as per ISO 9001, 14001, 18001. Required Skills & Qualifications: Diploma in Mechanical Engineering / Draftsman / NCTVT from a reputed Institute. Experience: Minimum 5 years of experience in engineering / project / process / heavy engineering industry. Must have experience in AutoCAD 2D & 3D, Inventor drawings handled independently. Good exposure to line layouts, foundation layouts, structure assignments , especially of continuous furnaces. Technical Competencies: Thorough knowledge of drawings, drafting standards, and engineering standards. Good understanding of Line layouts, foundation layouts. Good knowledge of equipment related to Mechanical/Chemical. Working knowledge in AutoCAD 2D & 3D, Inventor/SolidWorks . Good understanding of hand-sketches, views, and equipment drawings. Other Competencies: Good in Communication, Fluency in English. John Cockerill offers you career and development opportunities within its various sectors in a friendly working environment. Do you want to work for an innovative company that will allow you to take up technical challenges on a daily basis

The Idle Candidate Should Be Specialised In Measurement & Cost Estimation Of MEP Systems, Mechanical, Ventilation, Air Conditioning, Plumbing, Drainage, Electrical, Low Voltage, Vertical Transportation, Etc. Along With Havie experience of working on project in UK/Europ region. Keeping track of design changes, actual work modifications, and subcontractor work Offering advice on contract suitability, improvements, and new strategies to managers and clients Shall have knowledge of Method of measurements like NRM1, NRM2 & NRM3, (POMI) and experience of CESMM standard method of measurement preferred but not essential Shall have experience on different types of form of contract, drawings, DBRs, Specifications, and other project documents. Should be able to take responsibility for quantity take-off/ Validating Quantity & Estimates for MEP items. Shall act as a supporting member for completing/verifying the tasks assigned to the team. Shall have a basic understanding of market rates. Shall prepare RFI, Assumptions and Qualifications for the take-offs. Shall raise queries and liaise with the interdepartmental Team Leads and/or the Client for clarifications. Cost Estimation & Assist with drafting detailed progress/ cost reports Understanding the implications of health and safety regulations Well-developed and efficient verbal and written communication and interpersonal skills. Experience in Cost X and other on screen take off software will be an advantage MRICS or enrolled on APC preferred but not essential,

What are we looking for We are seeking a proactive and skilled Graduate Engineer with a strong background in design and engineering within the steel strip processing industry. The ideal candidate will be adept at thermal calculations, 3D modeling, and possess excellent leadership skills to guide a team of draughtsmen while ensuring the highest quality of engineering deliverables. Key Responsibilities: Control a group of draughtsmen. Checking drawings and Bill of Materials (BOMs). Ensure correctness of all prepared documents. Preparation of Drawings and BOMs. Preparation of models using 3D software like AutoDesk Inventor. Generating P&ID (Piping & Instrumentation Diagrams) and Data Sheets as per requirements. Making Design calculations . Selection of bought-out components. Coordination with other departments. Communication with customers and participation in technical discussions with customers. Coordination with manufacturing for discrepancies and deviations. Coordination with Erection and Commissioning for site support. Required Skills & Qualifications: First Class Engineering Graduate in Mechanical / Industrial / Production from a reputed university. Fluency in thermal calculation and thermal design of equipment. Good knowledge of engineering drawings, and 3D modeling. Must have thorough experience in Auto CAD, Autodesk Inventor / SolidWorks . Knowledge of Ansys / FEA will be an added advantage. Possess good communication skills. Thorough knowledge of drawings. Good knowledge of process equipment related to Mechanical / thermal systems. Process knowledge of Strip processing lines, galvanizing, Pickling & ARP will be preferred.

B.Arch, 4+ yrs exp. Design, plan, supervise construction of residential apartments, independent floors & shopping centers. Prepare landscaping, aesthetics, 3D views, BOQs, specs, layouts, cost estimates, adhere to deadlines. Local resident preferred.

Analyze tender documents, drawings, specifications, and requirements to prepare competitive cost estimates. Evaluate scope, quantities, and project timelines for electrical systems (LV/MV/HV). Coordinate with Supplier Provident fund Health insurance

Role & responsibilities Experience in BIW Underbody & Upperbody design & development at Automotive OEM around 18 to 25 years of experience. Strong program management skill with a goal/target minded discipline process excellent communication and interpersonal skill. At least one complete project execution as Team Lead of BIW Underbody & Upperbody parts. Experience in Commercial Vehicle project added advantage. Perform technical feasibility checks with respect to material, manufacturing, packaging & product design aspects. Creation and understanding of master sections. Knowledge of BIW Joinery definitions and assembly sequence. Knowledge of Vehicle Manufacturing & Assembly Process. Excellent understanding of Drawings, GD & T and BOM preparation. Hands on experience in CATIA application. Good knowledge of Teamcenter/PLM. Sound knowledge of engineering and system documents like DFMEA, DVP, DFA etc. Knowledge of BIW DVPs & Testing specification. Knowledge in Homologation & Crash standards. Knowledge of ADAS, AVAS system. Develop and manage project plans and ensure delivery on time. Working closely with team lead to develop each applicable component/sub-system to meet all mass, cost and performance targets.

The roles core functions are: Responsible for detailed Analysis of the rates & filling tender winning rates. Cost Analysis of awarded project. Deriving strategy to win the bid. Implementation : Arriving at Tender winning rate in consultation of the Management. Get quotes from various vendors/market based on approved brand list. Detailed Rate Analysis of the Rates Preparing detailed statistics of competitors rates. Preparation of Comparative statement. Evaluating competitors rate & tracking the same & suggesting the correctness of the competitors rate Arriving at the best strategy by site visit, meeting the client/Architect/ consultant before quoting the rates Standardization of rates/ rate Analysis format Training the Team Attending Pre bid meeting and studying the Tenders in detailed. Understand BOQ, Designs & Drawings available in tender document