560 Avionics Jobs

At LAT Aerospace, we’re building a clean-sheet Short Take-off and Landing (STOL) aircraft to transform regional air mobility in India. We’re looking for an Electrical Technician to support the build, integration, and validation of our high-voltage and low-voltage electrical systems—from powertrain harnesses to control and instrumentation wiring. What you’ll do Build and route wiring harnesses and cable assemblies for aircraft subsystems (power electronics, avionics, propulsion). Support assembly, troubleshooting, and validation of electrical systems across ground test rigs and flying hardware. Read and interpret schematics, wiring diagrams, and connector layouts to ensure high-reliability builds. Perform continuity checks, insulation resistance testing, and voltage verification. Crimp, solder, and assemble electrical connectors (including MIL-spec types) with precision and repeatability. Work with engineers to identify faults, document issues, and iterate rapidly on design changes. Maintain inventory of connectors, cables, and tools; ensure workspace readiness for high-mix prototyping. What we're looking for Experience working with electrical systems in aerospace, EVs, robotics, or related domains. Familiarity with both low-voltage signal wiring and high-voltage power wiring (up to 800V). Skilled in handling tools like crimpers, multimeters, soldering irons, and diagnostic equipment. Ability to work from engineering drawings and follow build instructions with minimal supervision. Bonus: experience with aircraft electrical standards (e.g., MIL-DTL-38999, AS50881) or high-voltage safety practices. Why LAT? Core team opportunity at a high-conviction deep-tech startup Real aircraft, real flying hardware, real impact Build the future of sustainable aviation in India

Compliance Verification Engineer – Propulsion Location: Mohali, Punjab Job Type: Full-time Department: Design Job Overview: We are looking for an experienced Compliance Verification Engineer (CVE) – Propulsion to support and certify propulsion systems for our next-generation aerospace platforms. This role involves ensuring propulsion system compliance with relevant aviation regulations, technical standards, and safety requirements during the design, testing, and certification phases. As a CVE for Propulsion, you will work closely with propulsion designers, integration teams, and regulators to verify the conformity of powerplants, electric propulsion systems, and related subsystems. Your expertise will directly contribute to ensuring the safety and regulatory compliance of our propulsion technologies. Key Responsibilities: · Compliance Verification: Serve as the designated CVE (Propulsion) for verifying compliance with applicable regulations (e.g., CS-E, CS-23/25, FAR-23/25, DGCA CAR 21). Review and approve propulsion system design documents, performance analysis, and certification substantiation reports. Evaluate compliance demonstration methods including simulations, tests, and safety assessments. · Regulatory Engagement: Act as the liaison with certification authorities (DGCA, EASA, FAA) on propulsion-related matters. Participate in propulsion system reviews, audits, and certification board meetings. · Technical Oversight: Oversee system integration and ensure that propulsion units meet airworthiness and safety requirements. Provide technical direction and feedback during design iterations, failure mode analysis, and verification planning. · Documentation & Reporting: Ensure the development and maintenance of compliance matrices, technical dossiers, and regulatory submission packages. Maintain accurate and up-to-date records of approvals, reviews, and compliance activities. · Testing & Validation: Support the definition, planning, and execution of propulsion system testing (endurance, thermal, vibration, EMI, etc.). Validate test results and correlate them with design models and compliance requirements. · Collaboration & Support: Collaborate with cross-functional teams including powertrain, systems, avionics, and safety engineering. Provide mentorship and guidance to propulsion and integration engineers on certification standards. Qualifications: · Education: Bachelor’s degree in Aerospace Engineering/Mechanical Engineering/Electrical Engineering/Or any other relevant technical discipline Core Knowledge Requirements: In-depth understanding of propulsion system certification specifications (e.g., CS-E, CS-23, CS-25) Familiarity with company Design Organization procedures and configuration control processes Solid knowledge of DGCA CAR 21 regulations and propulsion-related chapters and procedures Knowledge of continued airworthiness principles and failure management strategies for propulsion systems Technical Skills: Strong grasp of propulsion engineering principles including thrust, efficiency, thermal management, and integration Experience in testing and validating propulsion systems (including electric and hybrid) Understanding of aviation safety standards applicable to propulsion (e.g., fire protection, redundancy, reliability) Capability to assess compliance data, safety analyses (FMEA/FTA), and verification strategies Soft Skills: Excellent analytical and problem-solving skills for identifying potential non-compliance risks High attention to detail and accuracy in technical reviews Effective communicator with the ability to document, present, and justify technical decisions Collaborative mindset with a strong sense of ownership and accountability Preferred Qualifications: Previous appointment as CVE (Propulsion) under DGCA/EASA/FAA is a strong advantage Experience with electric propulsion systems (eVTOL, hybrid-electric aircraft) Familiarity with DO-160 environmental testing standards and propulsion-specific test protocols Experience with PLM/ERP systems and digital compliance management tools What We Offer: DOA Organisation PF and other state benefits Opportunity to work for futuristic aviation technology like eVTOL. Competitive salary and benefits package Opportunity to work on cutting-edge aerospace propulsion systems Dynamic team culture with technical freedom and regulatory exposure Chance to influence the future of sustainable aviation technology To Apply: Please submit your resume and cover letter to sapna.koul@nalwa.aero . Include examples or documentation of prior propulsion certification work if available. We are an equal opportunity employer and welcome applicants from diverse backgrounds.

Position Summary: As an Electronic Engineer at VEDA Aeronautics P Ltd, you will lead the design, development, and integration of critical electronic systems for our cutting-edge Unmanned Aerial Vehicles (UAVs). In addition to core engineering tasks, you will also be responsible for identifying, evaluating, and coordinating with vendors and suppliers for electronic components, ensuring both technical and commercial viability. This role requires a deep technical foundation, hands-on experience in UAV electronics, and strong commercial acumen in procurement and supply chain collaboration. Key Responsibilities: Design and develop electronic systems and circuits for UAV avionics, including flight controllers, ESCs, power management units, and sensor interfaces. Create detailed schematic designs, PCB layouts, and oversee fabrication and assembly. Integrate avionics components such as IMUs, GPS modules, RF communication systems, telemetry, and payload interfaces. Troubleshoot and test electronic hardware in lab and field environments. Collaborate with mechanical and software teams to ensure optimal systems integration. Identify, qualify, and manage electronic component vendors and manufacturers. Coordinate procurement activities in collaboration with the supply chain and production teams. Evaluate vendor performance and ensure timely availability of components for prototyping and production. Optimise cost, lead time, and reliability of components while ensuring compliance with industry standards. Maintain thorough technical documentation including circuit diagrams, BOMs, and test reports. Ensure adherence to regulatory and aerospace standards (DO-254, MIL-STD, etc.). Contribute to product design reviews, risk assessments, and continuous improvement initiatives. Responsible for Technical Manuals for Repair & Maintenance Qualifications & Experience: Bachelor’s or Master’s Degree in Electronics Engineering, Electrical Engineering, or related discipline. 7–10 years of experience in electronic hardware design, preferably in aerospace, UAVs, robotics, or defence. Proven experience in embedded systems, PCB design, and power electronics. Strong understanding of communication protocols (UART, CAN, SPI, I2C) and microcontroller platforms (STM32, Pixhawk, etc.). Experience with sourcing components, engaging with vendors, and managing procurement workflows. Familiarity with battery management systems and high-current electronics is preferred. Working knowledge of autopilot firmware. Key Competencies: Strong analytical and diagnostic skills Vendor management and negotiation capability Cross-functional teamwork and communication Proactive problem-solving and ownership Precision and adherence to quality standards Why Join Veda Aeronautics? At VEDA Aeronautics, we are building the future of unmanned flight in India through innovative UAV platforms for logistics, surveillance, and strategic applications. As part of a dynamic and mission-driven engineering team, you will have the opportunity to work on breakthrough technologies, take ownership of systems that fly, and contribute directly to nationally impactful aerospace programs.

You will be joining AeroCare, a leading technology company that is transforming healthcare logistics with cutting-edge drone systems. Our goal is to enhance healthcare accessibility by offering dependable, efficient, and autonomous delivery solutions. At the intersection of technology and healthcare, we develop innovative products to facilitate the swift transport of medical supplies, even to the most remote areas. By becoming part of our team, you will contribute to driving change and creating a tangible impact through the use of groundbreaking drone technology. As a System Engineering Intern based in Karnataka, India, you will play a vital role in system engineering, troubleshooting, and working on various drone subsystems such as propulsion, avionics, and battery systems. Your responsibilities will include collaborating with our technical and product teams to grasp the qualitative requirements of the final product and implementing them effectively. You will be expected to make well-informed decisions at the subsystem and component levels to fulfill engineering and program requirements. Moreover, your input from cross-functional collaboration, adherence to industry standards, and adoption of best practices will be crucial in the continuous enhancement of our product. To excel in this role, you should possess experience in testing and operating small UAS and/or RC aircraft, whether fixed-wing or multirotor systems. Additionally, familiarity with flight-planning and ground control station software, as well as knowledge of UAV platforms like Pixhawk, DJI, Ardupilot, and PX4, will be advantageous. Proficiency in integrating, operating, and fine-tuning autopilots on diverse unmanned vehicles is essential. Basic familiarity with electrical test equipment such as multimeters and oscilloscopes, along with UAS sensors, is required. Furthermore, the ability to write Python and modern C++ using an object-oriented approach is necessary, with prior experience in Robotics being a valuable asset to your candidacy.,

As a Flight Line Mechanical Technician at Airbus India Private Limited, your main responsibility will be to perform technical interventions to ensure the H125 Aircraft is in compliance. This includes working on structural sub-assemblies, avionics, electrical, and mechanical systems like electrical, hydraulic, pneumatic generation systems, and more. Your role will involve ensuring the aircraft is fully operational before and after ground and flight tests. Your key responsibilities will include preparing the aircraft for both ground and flight activities, installing or removing sub-assemblies of aircraft systems on the runway, performing preventive maintenance and re-compliance following tests, diagnosing and troubleshooting anomalies within the systems, assisting during flight operations as required, and ensuring proper documentation and record-keeping of maintenance activities. To excel in this role, you will need technical expertise in helicopter mechanical systems, particularly avionics and hydraulic systems. You should be able to diagnose, troubleshoot, and efficiently repair system defects, have knowledge of aircraft maintenance practices and technical documents, experience in working on flight lines, and the ability to handle urgent maintenance needs during flight tests or ground operations. Desired experience for this position includes prior work on H125 or similar helicopter models, familiarity with aircraft system configurations, assembly, and integration procedures, as well as previous experience in a flight line maintenance role. This job requires a keen awareness of potential compliance risks and a strong commitment to acting with integrity, which is crucial for the success, reputation, and sustainable growth of the Company. By applying for this position, you consent to Airbus using and storing information about you for monitoring purposes related to your application or potential future employment. Airbus is dedicated to equal opportunities for all and will never request any monetary exchange during the recruitment process. Any impersonation of Airbus for such requests should be reported promptly. At Airbus, we encourage a collaborative and flexible working environment to support innovative thinking and enhance productivity. Join us in our mission to work, connect, and collaborate more easily and flexibly in pursuit of excellence in the aviation industry.,

Job Summary We are seeking an experienced and innovative Senior Electronics Design Engineer to lead the development of mission-critical hardware for defense and aerospace applications. This role demands deep expertise in digital, analog, and mixed-signal circuit design with a strong emphasis on reliability, ruggedization, and MIL-STD compliance. The ideal candidate will contribute to system architecture, hardware design, validation, and documentation throughout the product lifecycle. Key Responsibilities  Lead the design and development of high-reliability electronic systems for military-grade products (radios, radar systems, control units, RF front-ends, etc.)  Develop schematics and PCB layouts for analog/digital/mixed-signal systems using industry-standard EDA tools  Perform worst-case analysis, signal integrity, thermal and EMI/EMC analysis to ensure compliance with MIL-STD  Design and validate interfaces  Collaborate with firmware, FPGA, RF, and mechanical teams for integrated system design  Guide junior engineers and conduct design reviews, technical audits, and peer validations  Support environmental qualification  Develop comprehensive documentation required for defense contracts and compliance  Interface with procurement, manufacturing, and quality teams to ensure producibility and lifecycle sustainment  Ensure design traceability and configuration control in accordance with ISO Standards Required Qualifications  Bachelor’s or Master’s degree in Electronics/Electrical Engineering or related discipline  8+ years of hands-on experience in electronics design, preferably in defense or aerospace domain  Strong foundation in analog, digital, power, and mixed-signal electronics  In-depth experience with high-reliability components, thermal design, and redundancy  Familiarity with MIL standards and environmental requirements for rugged systems  Experience in leading hardware development through full product lifecycle  Expertise with lab instruments (oscilloscopes, spectrum analyzers, VNA, etc.) Preferred Skills  Knowledge in Embedded system design  Knowledge of secure hardware design  Experience with FPGA interfacing, high-speed ADC/DAC integration  Working knowledge of VHDL/Verilog and embedded C/C++ for board bring-up  Familiarity with PLM  Background in satellite communication, EW, SDR, avionics, or secure communication systems  Active or eligible for security clearance Personal Attributes  Strategic and systems-level thinking with attention to tactical execution  Strong leadership, mentorship, and decision-making capabilities  Excellent documentation, presentation, and communication skills  High level of integrity, accountability, and mission focus Job Types: Full-time, Permanent Benefits: Cell phone reimbursement Health insurance Paid sick time Paid time off Provident Fund Experience: electronics design: 8 years (Required) Work Location: In person

#Hiring #GNC #Propulsion #ADCS TECHNICAL PROGRAM MANAGER – GNC (ADCS, Propulsion) XDLINX Labs is looking to hire an experienced technical program Manager for GNC Systems to collaborate with an exceptional team composed of highly skilled young professionals, seasoned industry leaders, and visionary minds united by a passion to innovate and create cutting-edge space solutions. As such, we have an intense culture of curiosity, hunger, and results. If you want a typical 9-5 job, this is not the place for you You do not need to meet 100% of the preferred qualifications to be considered. We encourage anyone who meets the basic qualifications and is interested in the role to apply – we are looking for enthusiastic, dedicated people to join our team, and want the opportunity to talk to you! Position Overview As the Technical Program Manager for GNC Systems , you will play a critical role in driving the development and delivery of advanced GNC solutions for our satellite missions. You will oversee cross-disciplinary teams working on the architecture, implementation, and validation of guidance, navigation, and control systems for space applications. This mid- to senior-level position requires a blend of deep technical understanding, project management excellence, and the ability to work across systems teams to deliver high-performance, space-qualified GNC solutions. Responsibilities · Own and lead all programmatic aspects of GNC, which includes ADCS, and Propulsion subsystem development for satellite platforms. · Collaborate closely with embedded systems, avionics, software, mechanical, and systems engineering teams to define technical architecture and program objectives. · Drive project execution from scoping and planning through testing, validation, and mission deployment. Drive project execution from scoping through delivery. · Creation and sign-off of major milestones and roadmaps of programs/projects planned for satellite missions. · Coordinate subsystem-level design reviews, simulations, hardware-in-the-loop testing, and system integration. · Manage design maturity, test campaigns, and qualification efforts in collaboration with internal teams and vendors. · Maintain accurate and prioritized backlogs using tools like Jira and Confluence; generate status dashboards and reports for program metrics and customer updates. · Establish effective communication cadences with cross-functional teams, suppliers, and leadership. · Lead root-cause analysis and mitigation strategies for technical and schedule risks. Identification of risks and detailing of a mitigation plan to ensure that the project stays on track, or is brought back on track in the event of delays or blockers · Promote best practices, repeatable processes, and continuous improvement across programs. · Keep senior executives and business teams updated on project timelines and results. · Communicate schedules, dependencies, issues, and risks across teams and stakeholders. · Lead program scoping with architecture, engineering, and senior leaders. · Produce weekly status reports and attend weekly status meetings. · Lead and coordinate design/implementation efforts with internal cross-functional teams and external partners. · Align the audience to organizational goals and outcomes, create engagement, and empower teams. · A detailed work breakdown of the project into a backlog of requirements for the entire project, and prioritized backlogs for every iteration, typically maintained in tools like Jira and Confluence. This should include dashboards, visualizations, and reports to track key metrics (project metrics, customer metrics, and product metrics) · Establishment of learnings, best practices, standardized frameworks, and tools across programs and projects Requirements · Bachelor’s degree in aerospace engineering, Mechanical Engineering, Electrical Engineering, or a related field. Master’s degree preferred. · 3 To 5 years of experience as TPM · Strong foundational understanding of GNC, ADCS, and Propulsion subsystems for satellites or aerospace platforms. · Experience with embedded control systems, sensor fusion, actuators (reaction wheels, thrusters, magnetorquers), and navigation filters (e.g., EKF). · Familiarity with mission dynamics, attitude control algorithms, and orbital mechanics. · Excellent verbal and written communication skills, with proven ability to coordinate across disciplines and levels of leadership. · Experience with tools such as Jira, Confluence, MS Project, and Git. · Strong knowledge of systems engineering principles, processes, and methodologies. · A critical thinker and problem solver. · Ability to work effectively across multi-disciplinary teams Preferred qualification · Prior experience leading space missions from early-phase design through launch and operations. · Experience with reaction wheel/magnetorquer modeling, star trackers, IMUs, GPS receivers, and propulsion integration. · Familiarity with FDIR (fault detection, isolation & recovery) and system-level autonomy. · Working knowledge of MATLAB/Simulink, Python, or C/C++ for control simulation and analysis. · Industry certifications like PMP, Six Sigma, or Agile Scrum Master are a plus. · Experience with satellite propulsion systems (cold gas, electric, or chemical). · Comfortable managing vendor relationships and hardware procurement cycles.

Bengaluru, Karnataka Job ID JR2025464472 Category Engineering - Electronic and Electrical Role Type Hybrid Post Date Jul. 30, 2025 Job Description At Boeing, we innovate and collaborate to make the world a better place. We’re committed to fostering an environment for every teammate that’s welcoming, respectful and inclusive, with great opportunity for professional growth. Find your future with us. As a leading global aerospace company, Boeing develops, manufactures and services commercial airplanes, defense products and space systems for customers in more than 150 countries. As a top U.S. exporter, the company leverages the talents of a global supplier base to advance economic opportunity, sustainability and community impact. Boeing’s team is committed to innovating for the future, leading with sustainability, and cultivating a culture based on the company’s core values of safety, quality and integrity. Technology for today and tomorrow The Boeing India Engineering & Technology Center (BIETC) is a 5500+ engineering workforce that contributes to global aerospace growth. Our engineers deliver cutting-edge R&D, innovation, and high-quality engineering work in global markets, and leverage new-age technologies such as AI/ML, IIoT, Cloud, Model-Based Engineering, and Additive Manufacturing, shaping the future of aerospace. People-driven culture At Boeing, we believe creativity and innovation thrives when every employee is trusted, empowered, and has the flexibility to choose, grow, learn, and explore. We offer variable arrangements depending upon business and customer needs, and professional pursuits that offer greater flexibility in the way our people work. We also believe that collaboration, frequent team engagements, and face-to-face meetings bring together different perspectives and thoughts – enabling every voice to be heard and every perspective to be respected. No matter where or how our teammates work, we are committed to positively shaping people’s careers and being thoughtful about employee wellbeing. With us, you can create and contribute to what matters most in your career, community, country, and world. Join us in powering the progress of global aerospace. Position Overview: Boeing India Engineering & Technology Center (BIETC) is based in Bangalore, India and is engaged in the development of advanced aerospace and aviation technologies and software products. This is for an Associate Systems Engineer position in the airplane systems engineering organization in the Boeing Commercial Airplanes (BCA) BU. As a member of this team, you will be responsible for System development of aircraft network system, aircraft interface device, computing device, electrical sub-systems, development Assurance (ARP4754A), Validation & Verification and traceability of requirements. Also, you will be responsible for Systems design, system level requirements development, decomposing requirements, testing, and supports FAA certification documents This role will be based out of Bangalore, India . Position Responsibilities: Demonstrate excellence in development electrical sub-systems . Demonstrate excellence in System design, integration & testing . Demonstrate excellence in development Assurance (ARP4754A ) Develop System test procedures . Perform Requirements Management in DOORS . Evaluates customer/operational needs to define and coordinate system performance requirements, functional requirements and regulatory requirements . Applies an interdisciplinary, collaborative approach to plan, design, develop and verify a lifecycle balanced system of systems and system solutions . Coordinates with engineering functions to define requirements related to safety, reliability, maintainability, testability, human systems integration, survivability, vulnerability, susceptibility, system security, regulatory, certification, product assurance and other specialty engineering groups . Develops the planning, organization, implementation and monitoring of requirements management processes, tools, risk, issues, opportunity management and technology readiness assessment processes . Resolves cross-functional technical issues . Present requirement, design and/or development revision and changes to formal change boards . Tests and validates to ensure system designs meet operational and functional requirements . Employer will not sponsor applicants for employment visa status. Basic Qualification: A Bachelor’s degree or higher is required as a BASIC QUALIFICATIO N Working experience in couple of areas from the following : electrical sub-systems: Electrical Power Systems- Main AC, DC Standby, Backup Electrical Power, Electrical Load Management, electrical power generation, proximity sensing systems, exterior lighting, systems card files, window heat system, distribution, power conversion topologies and auto transformers Perform Requirements development, System Architecture, Design, Verification and Validation for airplane systems . Working experience on ARP 4754 & knowledge on ARP-4761, DO178, DO -160 & DO-254 Standards . Working experience on / MIL STD 704 & MIL STD 461 requirement is require d Systems testing knowledge and Hands on experience in using test equipment . Hands on Experience on IBM Rational DOORS / dxl scripting / automation for productivity in requirements Management is require d Performs System analyses activities for safety, reliability, maintainability, testability, regulatory and certification . Strong Written, verbal communication with engineers, management, and non-engineering support staf f Experience in working with suppliers or other external stakeholders is preferred . Ability to work in a virtual team environment . INCOSE certification on Systems Engineering is an added advantage . Detailed knowledge of FAA certification and airworthiness requirements is highly desired . Experience in test planning, setup, test development, execution, conducting tests in a lab or production environment . Experience in performing design, integration, and/or testing on avionics sub-systems, performing environmental testing . Typical Education & Experience: Engineering degree (Electronics & communication, Electronics & telecommunication / Electrical & electronics) and 4 to 8 years related work experience, a master’s degree and 3-7 years related work experience or an equivalent combination of education and experience. Relocation: This position offers relocation within INDIA. Applications for this position will be accepted until Aug. 16, 2025 Export Control Requirements: This is not an Export Control position. Education Bachelor's Degree or Equivalent Required Relocation This position offers relocation based on candidate eligibility. Visa Sponsorship Employer will not sponsor applicants for employment visa status. Shift Not a Shift Worker (India) Equal Opportunity Employer: We are an equal opportunity employer. We do not accept unlawful discrimination in our recruitment or employment practices on any grounds including but not limited to; race, color, ethnicity, religion, national origin, gender, sexual orientation, gender identity, age, physical or mental disability, genetic factors, military and veteran status, or other characteristics covered by applicable law. We have teams in more than 65 countries, and each person plays a role in helping us become one of the world’s most innovative, diverse and inclusive companies. We are proud members of the Valuable 500 and welcome applications from candidates with disabilities. Applicants are encouraged to share with our recruitment team any accommodations required during the recruitment process. Accommodations may include but are not limited to: conducting interviews in accessible locations that accommodate mobility needs, encouraging candidates to bring and use any existing assistive technology such as screen readers and offering flexible interview formats such as virtual or phone interviews. Your Benefits No matter where you are in life, our benefits help prepare you for the present and the future. Competitive base pay and incentive programs. Industry-leading tuition assistance program pays your institution directly. Resources and opportunities to grow your career. Up to $10,000 match when you support your favorite nonprofit organizations.

Location: Bangalore - Indraprastha, India Thales people architect solutions that enable two-thirds of planes to take off and land safely. We create in-flight entertainment systems that engross 50 million fliers every year and we develop the avionics that control the world s largest commercial aircrafts. Our simulators train the next generation of pilots for fighter jets, transporters and search and rescue helicopters. And, together, each and every member of our aerospace team makes a difference. Thales is currently looking for e2e tester to join our Payment Squad Engineering Team to test our next generation of In-Flight Entertainment and Connectivity (IFEC) product suite. This position requires the candidate to be responsible for the complete testing of the product in all aspects. This individual needs Qualifications: Bachelor of Technology in Computer Science & Engineering, Electronics & Communication or equivalent discipline with 3 to 7 years of relevant experience. Job Responsibilities: As a Senior Engineer, you will be accountable for both technically and behaviorally, be able to cooperate effectively, and be adaptive in working with different stakeholders. In more details: Responsible for automation testing using protractor/Selenium tools Candidate should have good expertise using Selenium webdriver and NGWebDriver Candidate is expected to do regression testing and functional testing Responsible for API automation testing using Rest assured framework Minimum Skills/Experience: Bachelor s degree in Engineering, Computer Science or related study Good testing experience of 3 to 7 years in web application technologies with Spring Boot and in Frontend technologies Node JS/ Angular Knowledge in development with BDD framework Knowledge on test automation ofWeb Application using Selenium WebDriver Knowledge on test automation using Cucumber Knowledge in development with Cloud platforms (AWS, Azure) Knowledge in development with structured database such as SQL, MySQL, etc Must be able to demonstrate innovation in problem solving Must have clear communication with team members and product owners Must follow and support agile methodologies and practices by actively participating in all SCRUM ceremonies Must adhere to and develop best practices in software engineering Must be able to interact with individuals to solidify understanding of requirements and expectations Experience with TestNG annotations Experience with Grouping, parallel and batch execution Experience in Mobile automation Testing tools

Job Responsibilities : Lead, mentor, and develop a team of flight mechanics and control engineers Collaborate with other departments, such as aerodynamics, structures, and systems engineering. Manage multiple projects simultaneously, ensuring on-time and on-budget delivery Set performance goals and provide regular feedback Manage the team's budget and resources Developing project plans, setting goals and milestones, and allocating resources effectively. Assigning tasks to team members, monitoring progress, and ensuring tasks are completed on time and within scope. Develop mathematical models for aircraft flight dynamics of fixed-wing, rotary-wing, and hybrid platforms. Design and optimize flight control laws including autopilot control laws and stability augmentation systems. Analyze and evaluate aircraft stability, controllability, and aerodynamic performance under various conditions. Create high-fidelity simulations for the aircraft systems. Simulate mission scenarios to validate aircraft performance and mission feasibility. Develop software-in-the-loop (SIL) test facilities. Design, build, and test of Systems Integration Labs for systems integration, software, and hardware-in-the-loop testing of Flight Control, Avionics, Electrical, and Actuation Systems including Fly-By-Wire Flight Control Systems Tech Skills Required : Provide expert guidance on flight mechanics, control theory, and aerospace engineering principles.  Experience in full lifecycle development including system requirements, design, system-level integration, validation, and verification  Familiar with safety critical development including ARP4754, DO-178B/C and DO-254 or equivalent stringent process requirements and regulatory frame works of FAA/EASA/DGCA. Strong understanding of flight dynamics, kinematics, and control theory.  Hands-on experience with flight control system element design, testing and tuning.  Good understanding of linear and nonlinear systems  Expertise in handling reliable flight control sensors, inceptors,  Strong oral and written communication skills to work with both technical and non-technical team members  Demonstrated experience understanding aircraft missions and translating these into system use cases and requirements for the development of flight controls systems.  Excellent analytical and problem-solving skills  Knowledge in basic Physics, Mechanical Mechanisms, Electric power train and Electronic Circuits Preferred Qualification & Experience Bachelor's Degree in Aerospace / Aeronautical / Mechanical / Electrical / Instrumentation Engineering or related field and 14+ years of experience leading the architecture, design, and integration of military and commercial flight controls systems which include hardware, software and actuators Or Master's Degree in Aerospace / Aeronautical / Mechanical / Electrical / Instrumentation Engineering or related field and 12+ years of experience leading the architecture, design, and integration of military and commercial flight controls systems which include hardware, software and actuators Or PhD in Aerospace / Aeronautical / Mechanical / Electrical / Instrumentation Engineering or related field and 10+ years of experience leading the architecture, design, and integration of military and commercial flight controls systems which include hardware, software and actuators Location : Chennai

This role is responsible for driving Technical Solution improvement resulting in quality/Cost and cycle time improvements across Displays and graphics products/programs. Responsible for technical solution development (design & interface definition) in collaboration with Honeywell business partners. The role is required to demonstrate thought leadership in one or more technical disciplines of expertise and takes ownership for identification of technical talent and coaching cross functional teams in technical capability development. Collaborates/ actively networks with stakeholders for new technologies/ideas incubation/information. Performs competitive technology analysis and IP analysis (Trends, new opportunities, surveys risk of existing patents) in multiple product lines assigned and advices internal/ external stakeholders. Participates in Technology Trade Shows/conferences for knowledge gain/sharing and Honeywell Technology Symposiums for knowledge sharing through paper and poster presentations and technology demonstrations. Motivates functional team (developers) in IP creation for the Product in the field of expertise. Looks at problems in programs/products and carry out technical feasibility tests to map the right solution to customer need and Influences decisions for translation to design for projects of complex nature. Drives Projects to the extent as required in his role. Identifies all technical risks in the project and guides team in resolving technical issues. Actively involved with the technical aspects of the IPDS cycle (Integrated product development and supply cycle / New Product Introduction Cycle (NPI) where applicable. Collaborates with Software architect/Chiefs driving design effectiveness, first time right design and Human factors. Imbibes and role models Honeywell behaviors and values. Guide the teams for effective implementation of various systems and subsystems. Coaches assigned functional teams in the application of processes and tools Driving strong Basis of Estimates (BOE) across each of the Quotation estimates of responsible program for the content by working through Project engineers, Systems Leads, and technical managers as required. Participates in program's software architecture, design and requirement reviews as a key input provider. Strategically own and drive key software initiatives/imperatives Drive robust plan and pipeline of rapid prototypes for the near term risk avoidance to the program and medium term features which bring revenue potential through product pre-visualization(PPV),Proof-of-concept(POC),Point of Views(POVs). Establish strong MOS with Chiefs engineers, Systems experts, Software Architects, Human factors engineer and Software test engineering and drive best practices across the programs Should act as Liaison between Displays & Graphics and Database team in development of Database in compliance with standards. Expert in C & C++ programming Hands-on experience in development of system requirements Good technical knowledge of Avionics Architectures/platforms Hands-on experience in system level testing, integration or sub-system benches Knowledge of any Configuration Management System such as BitBucket, SVN etc would be an added advantage. Experience working in life cycle stages of Systems Life cycle & AGILE exposure. Ability to proactively identify and resolve problems in a timely manner. Demonstrated ability to communicate effectively; both verbally and written. QUALIFICATION: BE/B.Tech, M.E/M.Tech Experience EXPERIENCE:8 to 12 years of Work experience on Aerospace systems Honeywell helps organizations solve the world's most complex challenges in automation, the future of aviation and energy transition. As a trusted partner, we provide actionable solutions and innovation through our Aerospace Technologies, Building Automation, Energy and Sustainability Solutions, and Industrial Automation business segments – powered by our Honeywell Forge software – that help make the world smarter, safer and more sustainable.

This role is responsible for driving Technical Solution improvement resulting in quality/Cost and cycle time improvements across Displays and graphics products/programs. Responsible for technical solution development (design & interface definition) in collaboration with Honeywell business partners. The role is required to demonstrate thought leadership in one or more technical disciplines of expertise and takes ownership for identification of technical talent and coaching cross functional teams in technical capability development. Collaborates/ actively networks with stakeholders for new technologies/ideas incubation/information. Performs competitive technology analysis and IP analysis (Trends, new opportunities, surveys risk of existing patents) in multiple product lines assigned and advices internal/ external stakeholders. Participates in Technology Trade Shows/conferences for knowledge gain/sharing and Honeywell Technology Symposiums for knowledge sharing through paper and poster presentations and technology demonstrations. Motivates functional team (developers) in IP creation for the Product in the field of expertise. Looks at problems in programs/products and carry out technical feasibility tests to map the right solution to customer need and Influences decisions for translation to design for projects of complex nature. Drives Projects to the extent as required in his role. Identifies all technical risks in the project and guides team in resolving technical issues. Actively involved with the technical aspects of the IPDS cycle (Integrated product development and supply cycle / New Product Introduction Cycle (NPI) where applicable. Collaborates with Software architect/Chiefs driving design effectiveness, first time right design and Human factors. Imbibes and role models Honeywell behaviors and values. Guide the teams for effective implementation of various systems and subsystems. Coaches assigned functional teams in the application of processes and tools Driving strong Basis of Estimates (BOE) across each of the Quotation estimates of responsible program for the content by working through Project engineers, Systems Leads, and technical managers as required. Participates in program's software architecture, design and requirement reviews as a key input provider. Strategically own and drive key software initiatives/imperatives Drive robust plan and pipeline of rapid prototypes for the near term risk avoidance to the program and medium term features which bring revenue potential through product pre-visualization(PPV),Proof-of-concept(POC),Point of Views(POVs). Establish strong MOS with Chiefs engineers, Systems experts, Software Architects, Human factors engineer and Software test engineering and drive best practices across the programs Should act as Liaison between Displays & Graphics and Database team in development of Database in compliance with standards. Expert in C & C++ programming Hands-on experience in development of system requirements Good technical knowledge of Avionics Architectures/platforms Hands-on experience in system level testing, integration or sub-system benches Knowledge of any Configuration Management System such as BitBucket, SVN etc would be an added advantage. Experience working in life cycle stages of Systems Life cycle & AGILE exposure. Ability to proactively identify and resolve problems in a timely manner. Demonstrated ability to communicate effectively; both verbally and written. QUALIFICATION: BE/B.Tech, M.E/M.Tech Experience EXPERIENCE: 6 to 10 years of Work experience on Aerospace systems Honeywell helps organizations solve the world's most complex challenges in automation, the future of aviation and energy transition. As a trusted partner, we provide actionable solutions and innovation through our Aerospace Technologies, Building Automation, Energy and Sustainability Solutions, and Industrial Automation business segments – powered by our Honeywell Forge software – that help make the world smarter, safer and more sustainable.

Act as the technical interface between the engineering services team and OEM/Tier-1 customer engineering teams. Lead and support avionics systems engineering activities throughout the lifecycle — requirements development, architecture, design, integration, verification, and validation. Interpret customer requirements and translate them into clear, actionable system and subsystem requirements, aligned with ARP-4754A guidelines. Work collaboratively with cross-functional teams (software, hardware, safety, and integration) to ensure seamless system development and certification. Contribute to the development of DO-178C and DO-254 compliant artifacts, supporting software and hardware engineering. Participate in technical reviews, design discussions, and formal audits with customer engineering and certification teams. Perform safety analyses (FHA, PSSA, SSA) in compliance with ARP4761. Support lab integration, troubleshooting, and issue resolution on customer platforms or rigs. Required Qualifications: Bachelor’s or Master’s degree in Aerospace/Electronics/Computer Science Engineering. 10+ years of engineering experience with significant exposure to commercial avionics development. Strong knowledge of ARP-4754A systems engineering and ARP-4761 safety assessment processes. Hands-on experience in software development for embedded avionics (C, C++, Ada) and understanding of real-time systems. Familiarity with DO-178C, DO-254, and ARINC protocols (429, 653).

Develop innovative solutions and new approaches to engineering problems to determine the sequence of steps or processes required to fabricate and assemble products that meet the organization's standards of quality and cost. Analyze more complex product specifications, parts drawings, and other engineering data to develop new production processes, estimate time requirements for each step, and prepares operation sheets. Analyze existing production processes and develop recommendations for changes to working methods or operation sequences that will minimize risks, costs, and wastage; increase yields and productivity; and improve the quality and consistency of final products. Coach and mentor less experienced engineers; check the quality of their work, and help them resolve problems. Typically requires a Bachelor's degree in Engineering and four to seven years of experience. Job Description As a Process Assurance Engineer, you'll design, optimize, and manage product design and development processes following international standards to improve efficiency, quality, and safety, focusing on analyzing workflows, identifying bottlenecks, and implementing data-driven solutions. Skills and Requirements: More than 8 years of experience in full product development life cycle projects Part of at least two full life cycle product development and certification Quick learner with Strong analytical and problem-solving skills. Knowledge of process assurance principles and practices Experience in ARP4754, ARP4761, DO178, DO254, ISO 26262, IEC 61508 etc... Experience in avionics systems engineering with working knowledge of hardware, Mechanical parts and software. Knowledge and experience of systems engineering development and assessment processes in accordance with ARP-4754, DO 254 or DO 178 Development of planning, certification and accomplishment summary documents Knowledge of FAA or EASA certification processes and regulatory requirements Knowledge of software development processes and SOI audits in accordance with DO-178 Knowledge of hardware development processes and SOI audits in accordance with DO-254 Familiarity with relevant software development and configuration management tools and change management process Ability to work independently to guide a team in process compliance Good communication and interpersonal skills Six sigma green belt certified Certified or experienced in auditor functions Key Responsibilities: Design, develop, and optimize organization processes to enhance efficiency, quality, and safety. Analyze existing QMS processes, identify areas for improvement, and develop innovative solutions. Conduct process study, simulations, experiments, and data analysis to optimize performance. Develop and implement process control systems and technologies Analyze work flows within and across all departments to determine how the entire company can work better together Review the KPI monitoring systems and determine ways to improve their ability to maintain company performance and customer satisfaction Create an analytical process that justifies business decisions Monitoring of maturity of technical documentation during the entire process of developing an efficient embedded system Design, install, and maintain equipment and systems to support product manufacturing processes. Troubleshoot equipment and process issues, ensuring smooth and efficient operations. Develop and maintain process documentation, including standard operating procedures (SOPs). Gather, analyze, and report on process performance data. Prepare reports and presentations for management, highlighting process improvements and areas for further optimization.

Job Title: Mechanical Engineer - Drone Designer & Developer [creator, all fine skills to build drone from scratch] Skills: · A hands-on creator who loves building things from scratch—not just CAD models, but real, flying systems · Bachelor’s degree in Mechanical Engineering, Mechatronics, or equivalent practical experience · Experience with CAD tools like SolidWorks, Fusion 360, or CATIA ,FEA,CFD Analysis · Comfortable with rapid prototyping techniques 3D printing, laser cutting, etc. · Mandatory to have developed a drone prototype · Basic knowledge of flight dynamics, aerostructures, or drone mechanics is a plus Responsibilities : Design, model, and prototype mechanical components for UAVs (frames, housings, payload mounts, etc.) Work closely with avionics and flight software teams to ensure integrated system design Assist in material selection, weight optimization, and structural analysis Fabricate and assemble custom drone parts using tools like 3D printers, CNC machines, and hand tools Participate in testing, tuning, and troubleshooting of drones—both in the lab and in the field Document designs, iterations, and learnings using CAD, reports, and drawings Continuously iterate and improve designs based on feedback and field results

Chennai, Tamil Nadu Work Type: Full Time Job Responsibilities : Lead, mentor, and develop a team of flight mechanics and control engineers Collaborate with other departments, such as aerodynamics, structures, and systems engineering. Manage multiple projects simultaneously, ensuring on-time and on-budget delivery Set performance goals and provide regular feedback Manage the team's budget and resources Developing project plans, setting goals and milestones, and allocating resources effectively. Assigning tasks to team members, monitoring progress, and ensuring tasks are completed on time and within scope. Develop mathematical models for aircraft flight dynamics of fixed-wing, rotary-wing, and hybrid platforms. Design and optimize flight control laws including autopilot control laws and stability augmentation systems. Analyze and evaluate aircraft stability, controllability, and aerodynamic performance under various conditions. Create high-fidelity simulations for the aircraft systems. Simulate mission scenarios to validate aircraft performance and mission feasibility. Develop software-in-the-loop (SIL) test facilities. Design, build, and test of Systems Integration Labs for systems integration, software, and hardware-in-the-loop testing of Flight Control, Avionics, Electrical, and Actuation Systems including Fly-By-Wire Flight Control Systems Tech Skills Required : Provide expert guidance on flight mechanics, control theory, and aerospace engineering principles.  Experience in full lifecycle development including system requirements, design, system-level integration, validation, and verification  Familiar with safety critical development including ARP4754, DO-178B/C and DO-254 or equivalent stringent process requirements and regulatory frame works of FAA/EASA/DGCA. Strong understanding of flight dynamics, kinematics, and control theory.  Hands-on experience with flight control system element design, testing and tuning.  Good understanding of linear and nonlinear systems  Expertise in handling reliable flight control sensors, inceptors,  Strong oral and written communication skills to work with both technical and non-technical team members  Demonstrated experience understanding aircraft missions and translating these into system use cases and requirements for the development of flight controls systems.  Excellent analytical and problem-solving skills  Knowledge in basic Physics, Mechanical Mechanisms, Electric power train and Electronic Circuits Preferred Qualification & Experience Bachelor's Degree in Aerospace / Aeronautical / Mechanical / Electrical / Instrumentation Engineering or related field and 14+ years of experience leading the architecture, design, and integration of military and commercial flight controls systems which include hardware, software and actuators Or Master's Degree in Aerospace / Aeronautical / Mechanical / Electrical / Instrumentation Engineering or related field and 12+ years of experience leading the architecture, design, and integration of military and commercial flight controls systems which include hardware, software and actuators Or PhD in Aerospace / Aeronautical / Mechanical / Electrical / Instrumentation Engineering or related field and 10+ years of experience leading the architecture, design, and integration of military and commercial flight controls systems which include hardware, software and actuators Location : Chennai

Date Posted: 2025-07-29 Country: India Location: 1st Flr, Wing B, North Gate Phase-II, Modern Asset, Sy.No.2/2, Venkatala Village, Yelahanka Hobli, Bangalore – 560064, Karnataka Position Role Type: Unspecified Raytheon Technologies Corporation is an Aerospace and Defense company that provides advanced systems and services for commercial, military and government customers worldwide. It comprises four industry-leading businesses – Collins Aerospace, Pratt & Whitney, Raytheon Intelligence & Space and Raytheon Missiles & Defense. Its 195,000 employees enable the company to operate at the edge of known science as they imagine and deliver solutions that push the boundaries in quantum physics, electric propulsion, directed energy, hypersonics, avionics and cybersecurity. The company, formed in 2020 through the combination of Raytheon Company and the United Technologies Corporation aerospace businesses, is headquartered in Arlington, VA. To realize our full potential, Raytheon Technologies is committed to creating a company where all employees are respected, valued and supported in the pursuit of their goals. We know companies that embrace diversity in all its forms not only deliver stronger business results, but also become a force for good, fueling stronger business performance and greater opportunity for employees, partners, investors and communities to succeed. Do you want to be part of a new, exciting initiative to combine foundational IT with new digital technologies? Our Digital Technology (DT) team is driving business efficiencies and a better customer experience by connecting technologies, people, information and processes. From making aircraft more electric, intelligent and integrated to building new software platforms such as Internet of Things, big data, artificial intelligence, there’s no better place to be right now than in digital. If you’re an agile thinker who enjoys utilizing modern technology to make big improvements, then you’re a perfect fit for this team. Join Raytheon Technologies and help us revolutionize the aerospace industry today! Job Description: Following direction from the Regional Manager, this role will lead a field technical support group that covers specific sites and possibly local geographic region. Responsible for close interactions with site business partners and leadership to fully understand and align IT support with business goals. This role will be required to manage and lead specific support aspects of the site including but not limited to desktop support, IT support, local aspects of infrastructure and physical asset management. This role will require deep technical knowledge to assist in incident resolution and request fulfillment via company ticketing system. Principal Responsibilities: Leads and supports the local IT infrastructure support teams to meet the needs of the business. Participates in the regional business and IT planning process to provide input and solicit expectations with regards to future IT support Liaison with BU Site Leader for site support services Provides technician performance reviews for improved service delivery. Reviews Site Data Metrics/KPI’s to proactive resolve current and future issues Works alongside site technicians to resolve tickets in queue when required. Site Technical SME, able to train and onboard new technicians. Oversee, coordinate, and/or provide support for satellite sites in their region. Meet with Regional Manager, BU site leader, and onsite technicians consistently to review performance at site, including ticket data, staffing needs, and other key performance indicators. Meet with other ESL’s and BU site leaders across the enterprise to share knowledge and best practices. Delivers initiatives and projects and ensures local service operation performance achieves established SLA goals. Ensures that there are consistent, standardized processes in place locally for managing IT escalations, issues resolution, staff mentoring and financial and IT planning. Serves as the site business conduit for local escalations related to support, services and delivery. Performs proactive analysis on all factors impacting availability and service level attainment. Ensures IT services are available and operational is all areas of responsibility. Performs other related duties as required. Preferred Qualifications: 10 years’ experience with a broad background to various infrastructure technologies including servers and networks, desktop technologies including hardware and software, and strong troubleshooting skills. ITIL Foundations, A+, MCSE, Net+, PMP or other technical and professional certifications desired. Demonstrated experience in service-focused technical environment. Demonstrated strong customer service skills and people leadership skills. Education: Typically requires a university degree or equivalent experience and minimum of 7 to 8 years prior relevant experience or an advanced degree in a related field and minimum 3 years experience. RTX adheres to the principles of equal employment. All qualified applications will be given careful consideration without regard to ethnicity, color, religion, gender, sexual orientation or identity, national origin, age, disability, protected veteran status or any other characteristic protected by law. Privacy Policy and Terms: Click on this link to read the Policy and Terms

Date Posted: 2025-07-29 Country: India Location: 1st Flr, Wing B, North Gate Phase-II, Modern Asset, Sy.No.2/2, Venkatala Village, Yelahanka Hobli, Bangalore – 560064, Karnataka Position Role Type: Unspecified Raytheon Technologies Corporation is an Aerospace and Defense company that provides advanced systems and services for commercial, military and government customers worldwide. It comprises four industry-leading businesses – Collins Aerospace Systems, Pratt & Whitney, Raytheon Intelligence & Space and Raytheon Missiles & Defense. Its 195,000 employees enable the company to operate at the edge of known science as they imagine and deliver solutions that push the boundaries in quantum physics, electric propulsion, directed energy, hypersonics, avionics and cybersecurity. The company, formed in 2020 through the combination of Raytheon Company and the United Technologies Corporation aerospace businesses, is headquartered in Rosslyn, VA. Additional Comments: Key Responsibilities: Analyze current business processes and documentation, identify areas for improvement, and recommend solutions to enhance efficiency and effectiveness. Develop and maintain comprehensive documentation, including business requirements, process flows, use cases, and user stories. Conduct detailed requirements gathering sessions with stakeholders to understand business needs and translate them into functional specifications. Collaborate with cross-functional teams, including IT and operations, to ensure alignment of business requirements with technical solutions. Develop and implement governance policies and procedures to ensure compliance with organizational standards. Collaborate to translate requirements and policies into implementation roadmaps Provide support during the implementation of new systems and processes, including user training and change management. Ensure the rigorous application of information security and information assurance policies, principles, and practices to business analysis activities. Qualifications: 15+ years’ of experience in Business Analyst, with a focus on requirements gathering and governance. Experience in Asset Management preferred. Strong understanding of business process analysis and improvement methodologies. Excellent organizational and project management skills. Ability to analyze data and generate reports to inform decision-making. Strong oral and written communication and interpersonal skills, with the ability to collaborate effectively with cross-functional teams. Experience with business analysis tools and software. Knowledge of information security and compliance standards related to business analysis. Ability to work independently and manage multiple tasks simultaneously. Experience with Scrum/Agile software development process preferred 2+ years of experience with Javascript, HTML, CSS, python a plus. RTX adheres to the principles of equal employment. All qualified applications will be given careful consideration without regard to ethnicity, color, religion, gender, sexual orientation or identity, national origin, age, disability, protected veteran status or any other characteristic protected by law. Privacy Policy and Terms: Click on this link to read the Policy and Terms

You are a dynamic and motivated Engineer being sought to join a team dedicated to UAV flight control system development. Your role will involve assisting in designing, developing, testing, and maintaining flight control software and hardware for UAV operations, offering a valuable opportunity to contribute to UAV technology and aerospace systems. Your responsibilities will include designing and developing flight control systems for fixed-wing and VTOL aircraft, conducting system modelling, simulation, and analysis to assess control system performance, creating control algorithms and software for flight control systems, performing hardware-in-the-loop (HIL) testing and validation, collaborating with aerodynamics, avionics, and systems engineering teams for system integration, supporting flight testing and analyzing data to enhance control system performance, ensuring compliance with aerospace standards and regulations, preparing technical documentation such as system specifications, test plans, and reports, troubleshooting and resolving issues during development and testing phases, and staying updated on flight control technologies to implement innovative solutions for system improvement.,

Job Track Description: Performs business support or technical work, using data organizing and coordination skills. Performs tasks based on established procedures. In some areas, requires vocational training, certifications, licensures, or equivalent experience. General Profile Expands skills within an analytical or operational process. Maintains appropriate licenses, training, and certifications. Applies experience and skills to complete assigned work. Works within established procedures and practices. Works with a moderate degree of supervision. Functional Knowledge Has developed skillset in a range of processes, procedures, and systems. Business Expertise Supports the achievement of company goals by integrating teams for the best outcome. Impact Impacts a team through quality of services and information provided. Follows standardized procedures and practices and receives moderate supervision and guidance. Leadership Has no supervisory responsibilities. Manages own workload. Problem Solving Ability to problem solve, self-guided. Evaluates issues and solutions to provide the best outcome for the client and end-users. Interpersonal Skills Exchanges information and ideas effectively. Responsibility Statements Reviews current processes and identifies trends. Reviews work produced for errors. Evaluates for performance standards (SLAs) required under contract. Compares various sampling techniques and identifies correct samples for auditing. Evaluates workflow tools to run reports. Coaches Level 1 auditors on sampling techniques and business process knowledge. Reconciles transaction processing for data accuracy. Interacts with external auditors to include (SOC 1) Service and Organizational Control Report. Performs other duties as assigned. Complies with all policies and standards.

About The Role tbdQualification tbd

Project Role : Application Developer Project Role Description : Design, build and configure applications to meet business process and application requirements. Must have skills : PySpark Good to have skills : NAMinimum 3 year(s) of experience is required Educational Qualification : 15 years full time education Summary :As an Application Lead, you will lead the effort to design, build, and configure applications, acting as the primary point of contact. Your typical day will involve collaborating with various stakeholders to gather requirements, overseeing the development process, and ensuring that the applications meet the specified needs. You will also be responsible for troubleshooting issues and providing guidance to team members, fostering a collaborative environment that encourages innovation and efficiency in application development. Roles & Responsibilities:- Expected to perform independently and become an SME.- Required active participation/contribution in team discussions.- Contribute in providing solutions to work related problems.- Facilitate knowledge sharing sessions to enhance team capabilities.- Mentor junior team members to support their professional growth. Professional & Technical Skills: - Good to have skills - AWS S3, DeltaLake, Airflow- Experience should be 4+ years in Python- Candidate must be a strong Hands-on senior Developer- Candidate must possess good technical / non-technical communication skills to highlight areas of concern/risks- Should have good troubleshooting skills to do RCA of prod support related issues Additional Information:- The candidate should have minimum 3 years of experience in PySpark.- This position is based at our Bengaluru office.- A 15 years full time education is required.- Candidate must be willing to work in Shift B i.e. from 11 AM IST to 9PM IST. Also, do the weekend support as per a pre-agreed rota. Compensation holiday may be provided for the weekend shift Qualification 15 years full time education

Industry Type: Defence and Aerospace Functional Area: · Design and development of Embedded Systems for Avionics, Defence and Aerospace applications At least 5+ years of hands-experience in design and development through his/her career.· Design and development of Microcontrollers / Microprocessors based (ARM, PowerPC, Intel, DSP controllers, ARM, etc) real time and non-real time system design. · Expert in Digital and Analog Design · Expert in FPGA based Design · Expert in embedded software and application software development · Sound knowledge of development process, product life cycle · Good knowledge of Functional Safety, Reliability, Availability, Maintainability and knowledge of various standards like DO178, DO254, MIL STD 810, MIL STD 461, DOD Standards, etc · Good knowledge of technologies, design, development and debugging tools Job Type: Full-time Pay: ₹300,000.00 - ₹1,000,000.00 per year Schedule: Day shift Supplemental Pay: Yearly bonus Work Location: In person

CP Goenka International School in association with is looking for English & SST Teacher to join our dynamic team and embark on a rewarding career journeyA Teacher is responsible for delivering lessons and facilitating learning in a classroom setting. This includes planning and delivering lessons, assessing student progress, creating a positive and engaging learning environment, and communicating with students, parents, and other stakeholders. The ideal candidate should have a strong understanding of the subject matter they are teaching and the ability to effectively communicate complex ideas to students. Additionally, excellent interpersonal and organizational skills, a commitment to student learning and development, and a growth mindset are essential for this role.

: 2025-07-24 Country: India Location: North Gate Business Park Sy.No 2/1, and Sy.No 2/2, KIAL Road, Venkatala Village, Chowdeshwari Layout, Yelahanka, Bangalore, Karnataka 560064 Position Role Type: Unspecified Overview: Collins is working building industry challenging Avionics products making the products smaller, smarter and more efficient. Platform software provides an infrastructure for hosting an Operating system and application services that interfaces with hardware. Position: Lead Engineer Job responsibilities: To work as an independent contributor developing, enhancing, and maintaining Mission critical platform software. Communicate and coordinate effectively within the teams. Build and nurture team at offshore, develop team strengths and improve upon their competency. Maintain integrity and work ethics within the team. Designs, develops, modifies, documents, tests, installs and supports software applications and systems. Understand the interfaces and behaviors of external software and hardware components that interact with the currently developed component. Scope out dependencies, issues, risks, & escalate prior to burning 20% of the efforts. Technically responsible for project milestones. Educational Qualification: Bachelors/Masters degree in Engineering with 5+ years of experience in Embedded Software Development and Verification. Basic Qualifications: Hands on experience on different stages of SDLC life cycle as per DO-178 B/C guidelines. Excellent understanding of system software concepts, binary executables, debug information, OS concepts. Strong C programming skills, Embedded C, Linux shell scripting. Strong RTOS concepts with experience on working with Multicore/Multi-Threading using VxWorks, Lynx OS. Good knowledge on processors and their architecture (ARM, PowerPC etc.). Hands on experience on Device Driver Implementation. Expertise with Software Configuration Management and Change Control Process (DOORS, JAMA, SVN, JIRA, GIT, Confluence etc.). Experience in using embedded development tools, debuggers, JTAG, Lauterbach, and Analyzers. Understanding of structural coverage analysis and unit test automation tools. Understanding of software certification documents. Proficiency in Quality audits process. Collins Aerospace . Avionics: Our Avionics team advances aviation electronics and information management solutions for commercial and military customers across the world. That means we re helping passengers reach their destination safely. We re connecting aircraft operators, airports, rail and critical infrastructure with intelligent data service solutions that keep passengers, flight crews and militaries connected and informed. And we re providing industry-leading fire protection and safety systems that our customers can count on when it matters most. Are you ready to learn from the most knowledgeable experts in the industry, develop the technologies of tomorrow and reach new heights in your career? Join our Avionics team today. WE ARE REDEFINING AEROSPACE. Some of our competitive benefits package includes: Benefits package includes: - Meal coupons - Group Term Life Insurance. - Group Health Insurance. - Group Personal Accident Insurance. - Entitled for 18 days of vacation and 12 days of contingency leave annually. - Employee scholar programme. - Work life balance. - Car lease programme. - National Pension Scheme - LTA - Fuel & Maintenance /Driver wages Nothing matters more to Collins Aerospace than our strong ethical and safety commitments. As such, all India positions require a background check, which may include a drug screen. Note: Background check and drug screen required (every external new hire in the India) Drug Screen only performed for Operations Positions At Collins, the paths we pave together lead to limitless possibility. And the bonds we form with our customers and with each other -- propel us all higher, again and again. Apply now and be part of the team that s redefining aerospace, every day . Privacy Policy and Terms: Click on this link to read the Policy and Terms