158 Welding Inspection Jobs - Page 3

Minimum Degree in Mechanical/ Production Engineering Minimum 5 Years Experience as a Welding Engineer in the Field Fabrication & Welding Experience in U-stamp audit Complying with the requirements of Quality control Manual, ASME codes and Customer specifications Good Knowledge of ASME-IX Knowledge required in International codes such as ASME, API, TEMA etc Preparation and Approval of welding procedure specification (WPS), Procedure Qualification record (PQR), and Welder & Welding operator performance qualification record (WPQ). Supervision and Qualifying the Welding procedures Preparation of Weld plan as per approved Drawing, Applicable codes and specification. Preparation of TPS for welding consumables. Preparation and maintain Welder Continuity log Preparation and issue Qualified Welders List based on Welder’s Continuity Log Provide resolution to Non-conformities arising in welding, in consultation with MQC Overall Supervision of welding activities at Shop floor Additional qualifications required ASNT Level II in RT, UT, PT & MT. Good knowledge of MS Office (Excel, Word, PPT)

Position Overview: We are seeking a dedicated and detail-oriented Quality Engineer to support our Quality Assurance and Quality Control operations. The ideal candidate will have 3-7 years of experience in fabrication and inspection of filtration systems, pressure vessels, and related process equipment. The role involves hands-on inspection, quality documentation, coordination with third-party inspection agencies, and ensuring compliance with industry standards. Key Responsibilities: Conduct in-process and final inspections of pressure vessels, filters, strainers, and associated fabrication work. Review and interpret engineering drawings, WPS/PQR, and material specifications for compliance. Prepare and maintain quality documentation , including inspection reports, test certificates, traceability records, and material test reports (MTRs). Coordinate with third-party inspection agencies (TPI) and clients during stage and final inspections. Support NDT activities including radiography, dye penetrant testing, ultrasonic testing, etc. Verify compliance with ASME, PED, IBR, and other applicable standards and codes. Participate in internal audits and assist in preparing for customer audits and QA documentation. Maintain calibration records and ensure availability of required inspection instruments. Raise non-conformance reports (NCRs) and work with production and engineering to implement corrective actions. Ensure the implementation of quality systems and continuous improvement practices across the shop floor. Qualifications & Skills: Diploma/Bachelors degree in Mechanical Engineering or equivalent 3–7 years of experience in Quality Control in a pressure vessel/fabrication-based manufacturing industry Sound knowledge of ASME Section VIII, PED, IBR , and other fabrication standards Familiarity with welding processes, NDT methods, and documentation requirements Proficient in MS Office and documentation tools Strong attention to detail and communication skills Ability to interpret technical drawings and specifications Preferred Skills: Certification in welding inspection (e.g., CSWIP, AWS-CWI) is a plus Experience working with ERP or quality management systems Exposure to Oil & Gas, Power, or Chemical process equipment inspection

Job Title: Site Engineer / Site Supervisor Mechanical Location: Ahmedabad / Chandauli / Suratgarh / Pilibhit Experience: 5 - 8 Years Industry: Mechanical / Piping Projects Employment Type: Full-Time Job Description: Looking for an experienced Mechanical Site Engineer/Supervisor with 5 - 8 years of hands-on experience in pipe fabrication and erection . Must have strong team-handling skills, technical knowledge, and site documentation expertise. The role involves managing daily site activities, ensuring quality and safety compliance, and coordinating with contractors and clients. Key Responsibilities: Supervise pipe fabrication, erection, and welding work. Read and execute as per drawings (Isometrics/P&ID). Manage site teams. Maintain daily reports and project documentation. Ensure safety, quality, and timely execution. Requirements: Diploma / Degree in Mechanical Engineering. Strong experience in piping and site execution. Good leadership and documentation skills. Willingness to relocate to site locations.

Inspection Engineer/ Surveyor (Mechanical) Key Responsibilities: Conduct stage-wise inspection during fabrication of: Pressure Vessels Heat Exchangers Fire Heaters with Convection Modules Perform QA/QC services at site , including: Erection and installation of static equipment Inspection and monitoring of piping systems Ensure compliance with project specifications , codes , and quality standards Prepare and maintain inspection reports , NDT records , and QA documentation Coordinate with third-party inspection agencies and client representatives Mandatory Certifications: ASNT SNT-TC-1A Level II in: Liquid Penetrant Testing (LPT) Magnetic Particle Testing (MPT) Radiographic Testing (RT) Ultrasonic Testing (UT) Visual Testing (VT) Preferred Certification: CSWIP 3.1 Welding Inspector (Candidates with this certification will be given first preference) Desired Candidate Profile: Strong knowledge of fabrication codes (ASME, API, etc.) Hands-on experience in inspection and QA/QC documentation Ability to work independently and manage site QA/QC activities Excellent communication and coordination skills Benefits : Competitive salary package Opportunity to work on prestigious Oil & Gas projects Career growth Experience Required: 10+ Years Industry: Oil & Gas / Petrochemical / EPC Qualification: B.E. in Mechanical / Metallurgy / Production Engineering Inspection Engineer/ Surveyor (Electrical) Key Responsibilities: - Inspection, Quality Control, Assessment of various HT/LT Elect Equipment like Motors, Generators, Transformers, Switchboards, Switchgears, cables, insulators, Control Panels, Battery Chargers, Switchyard items etc, at vendor premises & Sites. - Quality Audit, testing witness, verification of testing procedures of various equipment, review of vendor drawings, technical specifications. - Site inspection of Electrical Installations at Power Plant locations. - Inspection of Solid core insulators, Circuit Breakers, Cables HT and LT, Panels HT and LT, FLP equipments, motors etc., for various Projects. - Inspection of Protection relay, pressure, temperature gauges, indicators, switches, transmitters, for various projects - Inspection of Computer hardware, servers etc. - Vendor evaluation, Customer satisfaction surveys, coordination with vendors and clients. - Developing new clients and Tender bidding - Training on safety - Preparation of Conformity Report and Non-conformity Report of different Electrical equipments and materials. - Analysis of the quality of Electrical equipments and materials as per Indian Standard and International Standard and take suitable measures for quality control as per the standard. - Carry out different testing on the electrical equipments and materials for compatibility checking as per requirement of the consumer. BE /Diploma Electrical Engineering (4-8yrs Exp) Exp in QA/QC Equipment like Motors, Generators, Transformers, Switchboards, Switchgears, cables, insulators, Control Panels, Battery Chargers, Switchyard items. Benefits : Competitive salary package Opportunity to work on prestigious Oil & Gas projects Career growth

Education Qualification & Minimum Experience: B.Tech / B.E (Mechanical) with 5 years of experience Diploma (Mechanical) with 8 years of experience Job Responsibility: On-site quality and inspection experience in Oil & Gas, Refinery, Chemical, and Petrochemical complexes Critical Skills Desired: NDT Level II certification in UT, RT, MPT, DPT Certified Welding Inspector (AWS or CSWIP) Thorough knowledge of various codes and standards such as ASME, ASTM, IS, API

Core Roles Welding Process Selection & Development Select appropriate welding methods (e.g., MIG, TIG, SMAW, SAW) based on material and design. Develop and document welding procedures (WPS) and ensure their qualification (PQR). Fabrication Planning & Supervision Plan and oversee fabrication activities, including cutting, bending, rolling, and welding. Interpret engineering drawings and ensure fabrication complies with them. Material & Consumable Management Select and verify materials, welding electrodes/fillers based on specifications and codes. Ensure traceability and proper storage/handling of materials. Weld Quality & Inspection Coordination Ensure quality control during welding processes. Coordinate with NDT (UT, RT, PT, MT) inspectors and interpret results. Manage weld defect identification and repair processes. Code & Standard Compliance Ensure compliance with international/national standards like ASME, AWS, ISO, EN, or IS codes. Maintain records and documentation for audits and certifications. Key Responsibilities WPS/PQR Development : Create and qualify welding procedure specifications and records. Welder Qualification : Train and qualify welders as per standards. Weld Joint Design : Optimize weld joint design for strength, economy, and manufacturability. Process Optimization : Improve productivity by optimizing weld parameters and reducing rework. Documentation : Maintain welding logs, inspection reports, deviation notes, and test reports. Safety Compliance : Enforce welding safety procedures (PPE, gas handling, ventilation, etc.). Failure Analysis : Investigate weld failures and recommend corrective/preventive actions. Collaboration : Work with design, quality, and production teams for smooth project execution.

Role & responsibilities Carrying out inspection as per inspection and test plan for Pipe Spool Fabrication. Material verification and fit-up checking Coating and Blasting Inspections Reviewing Procedures for Quality Assurance Welding procedure assignment for Welding visual inspection Radiography/AUT Marking including lot formation Radiography Film Reviewing and/or witnessing AUT Final Clearance and certification (Online through application) Preferred candidate profile Candidate should be a Diploma holder or Graduate in Engineering field with minimum 3 years of experience in Quality Inspection. Should have knowledge on ASME B 31.3, Chapter V and VI for PWHT and hardness checking and Radiography/UT/PT/MPT inspection. Knowledge on Common Materials including Different grades of carbon steels covering LTCS, NACE, different grades of SS covering 304, 304L, 316, 321 and 347, Different grades of LAS steels covering P11, P22, P5, P9 and P91. NACE Level II and Level III for Coatings Welding Inspection and acceptance as per ASME Sec IX. NDT Level II Should have ASNT/ISNT level II certifications

Vacancy for Dip / BE / Btech Mech / EEE / Automobile engineers Designation - QC / Production / Maintenance / Stores / Purchase / Paint Shop / Tool Room Location - Sriperambudur / Oragadam / Chennai Salary - Negotiable

Immidiate joiners for multi welders in Saudi Arabia Ali M. Abdullah Allabbad Contracting ( Contracting company for Saudi Aramco). Immediate requirement for Multi Welder(Tig and Arc) for Saudi Arabia Salary for Freshers - 2500 SAR + Food and Accomodation Salary for Experienced - 3000SAR + Food and Accomodation 2 Year Contract 8 Hours Duty Airticket and Visa will be provided once stamping is done. Interview - Skill Test Only Immidiate Joiners only -Before end of July Month SC apply which will discussedd once your profile is shortlisted.

Standards & Codes: ASME Section VIII Div. 1 & 2 ASME Section IX (Welding Qualifications ASME Sec V Welding & NDT: Welding process knowledge (SMAW, GTAW, SAW) WPS/PQR/Welder qualifications Non-Destructive Testing (RT, UT, PT, MT, VT) knowledge Interpretation of NDT results Fabrication & Inspection: Dimensional inspection of shells, heads, nozzles Monitoring fit-up and alignment (e.g., weld mismatch tolerances) Hydrostatic / pneumatic testing procedures Surface preparation and painting/coating inspection Materials: Review of Mill Test Certificates Traceability & material control Handling special alloys (e.g., stainless, Hastelloy) Documentation: Preparing Quality Dossiers / Manufacturers Data Reports Reviewing MDRs, ITPs (Inspection & Test Plans), QAPs Familiarity with project documentation control systems Software & Tools Proficiency with MS Office (Excel, Word) Experience with ERP/QMS systems (SAP, Oracle, etc.) Use of inspection instruments (micrometers, ultrasonic thickness gauges) Core Competencies Strong understanding of pressure vessel manufacturing workflows Ability to read and interpret fabrication drawings Knowledge of welding metallurgy and defects Understanding of calibration systems and control of measuring instruments Soft Skills Attention to detail and record-keeping Strong communication (to interface with clients and third-party inspectors) Problem-solving approach to NCRs and root cause analysis (RCA) Preferred / Desirable ASNT Level II Certification in at least 2 NDT methods Knowledge of ISO 9001 and ASME U-Stamp compliance

Responsibilities: * Collaborate with production team on new projects * Ensure quality control through inspections * Design welding processes & procedures * Train operators on best practice * Maintain safety standards at all times Accessible workspace Food allowance Provident fund

Designation: QC Welding Inspector (CWI/CSWIP) Qualification: Dip or B.E Experience : 3 year to 5 year Salary : 4000 SAR - 6000 SAR Gulf Experience Mandatory CWI/CSWIP Must Need Direct Employment Visa contact HR-Mohammad- 90421 99659

Job Purpose Will work in Qualification Test lab for Pressure and load testing of Subsea & Surface products per specified industry standards Department: REMS Hyderabad. RESPONSIBILITIES: Executes and supports Product Qualification testing activities as Test Engineer. Serves as a technical point of contact for assigned work package scope, and may serve as a focal point for all communications related to scope. Develops Lab product/tool design, geometry standards documentation for product qualification requirements. Creates, reviews/approves part reports, drawings, engineering specifications and standards. Closely works with quality Engineer, product engineer, buyer, Project manager and all associated stakeholders. Supports and manage qualification project schedule and deliverables. Provides Management with technical assistance and work progress updates as requested. Mentors and provides technical guidance to Technicians. Works collaboratively to accomplish project tasks. Provides independent review of work packages. Provides vendors technical assistance and builds strong working relationships. Executes qualification per the requirements of industry code related to subsea production systems, TechnipFMC standards and client specifications, following the test procedures. Adheres to all relevant safe work instructions and design guidelines, Clearly demonstrates creativity and innovation in finding solutions and alternatives for shop floor issues and troubleshooting This is an individual contributor position. The role is responsible for executing activities assigned by the manager, and execute it with the assigned team. You are meant for this job if: Degreed Mechanical Engineer with at least 2/4-years of Engineering/qualification testing experience in the Subsea Production System engineering, reduced to 1/3-years for Masters candidates. Demonstrated experience in supporting qualification projects constrained by safety, quality, delivery, and cost requirements. Experience in reviewing Test procedures, documents, layouts, safety work plans and interpreting results of test. Work experience to include experience with various ASME, API, NORSOK, and DNV Codes and Standards as it relates to subsea equipment design and manufacturing. Exposure to various manufacturing processes - forging, hot and cold extrusion, cladding, HIP, induction bending etc Exposure to welding codes and practices - ASME IX and API 1104. Exposure to NDE codes and practices - UT, PAUT, PT, RT, MPI per ASME V. Accuracy, dependability, ability to manage schedule and prioritize work for self and others in team. Ability to work independently and as a part of a technical team - a self-motivated, self-starter. Strong written and verbal communication skills in English with ability to effectively transfer subject matter expertise. Ability to coach and mentor others. Leadership Competencies Act with Agility Adopt a Growth Mindset Problem Solving

Preferred candidate profile: Diploma/ITI/BE-MECH Available in Hosur, Tamil Nadu Knowledge in 2D and 3D Mechanical drawing. Supervising, Report making, Inspection on Mechanical components. Food allowance Annual bonus

Responsibilities: * Lead quality assurance processes from planning to execution. * Ensure compliance with industry standards and customer requirements. * Conduct regular inspections using QA/QC methods. Provident fund Annual bonus

Roles and Responsibilities Conduct quality inspections of sheet metal parts using measuring instruments such as Vernier caliper, Micrometer, Height gauge etc. Ensure compliance with welding processes and standards (e.g. AWS) through visual examination and testing. Develop and maintain documentation for quality control procedures, including QMS systems. Perform final inspections on products before packaging to ensure conformance to specifications. Collaborate with production teams to identify areas for improvement in manufacturing processes. Desired Candidate Profile 1-4 years of experience in Quality Engineering or related field (Sheet Metal industry preferred). Diploma/B.Tech/B.E. degree in Mechanical or relevant specialization.

Seeking QA/QC Engineer (Level 2) with 4–5 yrs exp. in fabrication/welding inspection. Must be NDT Level 2 certified (VT + MT/PT/UT/RT). Knowledge of ASME/API/AWS codes, strong documentation & client coordination skills required.

We are seeking an experienced Quality Control Inspector with expertise in DIMENSIONAL INSPECTION AND VISUAL INSPECTION. Candidate must be from mechanical background. Required Candidate profile Mechanically inclined individual with minimum 6 months experience in quality control. Must possess knowledge of stamping, molding or machined components. Gauges and other instrument knowledge.

Must be NDT level ll in VT,LPT,MT,UT. 4. Sound knowledge of UT weld scanning.(angle ,Normal probe) Familiar with the welding process, documentation, Coordinate with team as per plan, ISO3834 Location - Chakan, Pune Contact - Maya 9767897450

Responsibilities -QC Documentation -Carry NDE & Inspection -Handle TPI & Customer Inspection -Welding Documentation(Weld Map, WPS/PQR etc) -Stage Inspection -Customer & TPI Audits -Inspection at Vendors in Locality -Process Improvement Annual bonus Provident fund

Role & responsibilities We are looking for a detail-oriented and process-driven Quality Engineer to join our team. The ideal candidate will be responsible for implementing and maintaining quality assurance processes for sheet metal and canopy assemblies, ensuring that products meet required standards before dispatch. Preferred candidate profile Conduct in-process and final inspections of fabricated and assembled components. Read and interpret engineering drawings, technical specifications, and quality plans. Develop and implement quality inspection procedures and checklists. Ensure compliance with internal quality standards and customer-specific requirements. Manage non-conformance reports (NCRs) and initiate corrective and preventive actions (CAPA). Maintain records of inspection and test results. Use measuring instruments such as Vernier calipers, micrometers, height gauges, etc. Assist in audits (internal and external) and documentation as per ISO 9001 standards. Provide feedback to production and assembly teams to improve product quality. Liaise with customers during inspections and quality-related discussions. Required Skills & Qualifications: Diploma / Degree in Mechanical or Production Engineering. 35 years of experience in a fabrication or OEM supply environment, especially with sheet metal products. Knowledge of welding, powder coating, and canopy assembly quality checkpoints. Proficient in the use of standard measuring and inspection tools. Familiarity with ISO 9001, 5S, and quality documentation practices. Strong attention to detail and documentation discipline. Good communication and reporting skills.

Focus expertise Major exposure to welding and welded components and products and related testing and expertise Good command in Welding like TIG,MIG,GMA,FMA Welding process, Preparing WPS , Finding the defect on welding and correcting it. Preparing welding procedure and testing follow the standard of EN-15085,ISO-5817,ISO-14002-3,ISO-15607 Detect the welding defect and drive welding quality with vendor and adhereing to WPS Expertise in welding inspections through Radiography, visual inspections ,performed LPT testing DPT testing Ability to work closely with welders and driving product quality 1. To ensure all the products, processes and suppliers (Internal and External) are in line with organisational guidelines/SOP laid for quality and QMS and certification requirements 2. To Investigate, analyze and resolve supplier quality problems by conducting audits, analyzing defect trends and leading continuous improvement projects. 3. Liasioning with various certifying agencies to organise and achieve various product/compliance certifications 4. Handling Third Party Customer Inspections Experience:- experience in QA/QC with promising experience in spearheading Supplier & Product Quality as well as handling ISO 9001:2008/2015 QMS Audits and other audits certifications for OEM environment with in-depth exposure of EPDM/Rubber components, welding, die-casting, fabrication, tooling, injection molding, various surface treatment process viz. galvanisation, powder coating, nickel plating, etc. Responsibilities (A) Supplier Product Quality :- 1. Work with Purchase/VD to ensure supplier performance is regularly reported and that appropriate and timely corrective actions are implemented 2. Handle Incoming, In-process and Final inspections

Hello Visionary! We empower our people to stay resilient and relevant in a constantly changing world. Were looking for people who are always searching for creative ways to grow and learn. People who want to make a real impact, now and in the future. Does that sound like youThen it seems like youd make an outstanding addition to our vibrant team. Siemens Mobility is an independent run company of Siemens AG. Its core business includes rail vehicles, rail automation and electrification solutions, turnkey systems, intelligent road traffic technology and related services. In Mobility, we help our customers meet the need for hard-working mobility solutions. Were making the lives of people who travel easier and more enjoyable while constantly developing new, intelligent mobility solutions! We are looking for Bogie Production (Painter) Youll make a difference by Welders shall aware MIG/TIG with minimum 3 to 4 years of experience preferably in Heavy Industries, with ITI and NCVT. Should have knowledge of all types of welding positions. Should have knowledge and awareness how to read RT joint film and to rectify the joint in case of any discontinuity. Should have knowledge and awareness how to rectify the welding defects. Should have knowledge and awareness of weld defects and their remedial measures. Ability of reading the drawing of bogies & components for painting. Read and implement masking plans. Assistance when preparing bogies and components. Mixing paints and primers. Operate and monitor the paint pump and conveying systems, as well as the spray guns. Order the daily quantity of required paints for the paint warehouse. Taking masking film off bogies and components. Painting of bogies and components. Controlling bogies and components on and off exhaust m/c working. Recording test values and adherence in test reports. Specification of the required drying times. Awareness of safety policy. Awareness of PPE uses. Awareness of Emergency response at site. Awareness of Safe use of equipments. Basic skills for safe work culture. Knowledge of Hazards identified. Knowledge of safety related improvement. Knowledge of crane operation working experience in industry. Knowledge of quality requirements after painting DFT checking visual inspection & adhesion test. Desired Skills: You should have minimum experience of 2 years and ITI (Painting General Trade) +NCVT passed in painting industries. An interest of learning, ability to work in team, analytical ability. Join us and be yourself! Make your mark in our exciting world at Siemens. This role is based in Aurangabad. You might be required to visit other locations within India and outside. In return, you'll get the chance to work with teams impacting - and the shape of things to come. Find out more about mobility athttps://new.siemens.com/global/en/products/mobility.html and about Siemens careers at

Manufacturing Co. Howrah 17K to 25K + Free Room Skills:- Exp. in Fabrication Inspection Welding knowledge Req. Knowledge in PS Code, ASME Code, IS Code etc. Exp. in Quality Inspection of Raw Material, In-Process & Finished Goods Inspection, Required Candidate profile Education:- Diploma/ B.Tech Mechanical Engineer, Experience: Min. 3 to 5 Years exp. in Quality Inspection Vacancy: 5 Duty: 8 HRS CONTACT:- Namrata- 8910291069 Arijit- 9748042221 Benchmark Global

Position: Principal Engineer Reporting to : QAC - Head Experience: 4 to 6 Years Qualification: BE Mechanical Remuneration: Commensurate with capabilities and industry standards Domain : EPC / Supply orders for Energy Saving Systems, Hot water systems, Waste Heat recovery systems, Hot air generators systems, Steam generation systems, Thermal oil systems, Waste Heat Based Power Plant etc. Roles &Responsibilities: Preparation of QAP on the basis of customer specification. Carryout stage wise and final inspection as per QAP. Prepare & approve Welding Procedure Specification (WPS) & procedure Qualification Record (PQR). Prepare Welders Performance Qualifications as per ASME, EN, IBR and AWS standard. Prepare, approve Heat Treatment Procedure & Independently carryout Heat Treatment activity. Study of customer welding specification and comply QAC & welding requirements. Prepare weld map, take an approval from third party. Prepare welders qualification list as per ASME, IBR code. Contacts personnel of other agencies, engineering personnel, or clients to exchange ideas, information, or offer technical advice concerning QAC & welding matters. To give the timely support for site rework & implement corrective actions. Prepare MIS of QAC department and send to Group Head. Calibration of Measuring Instruments, Pressure Gauges, Welding Machines, Ovens. Plan the Training & qualification of permanent & temporary welders as per shop requirements. Develop new welding consumables, consumable testing & consumable calculations. Evaluates new developments in welding field for possible application to current welding problems & Welding production processes. Analysis of repair percentage & prepare action plan to reduce shop & welding rework. Conduct QA audit in House & at vendor places. Monitor QC&Welding processes on shop floor & ensure welding work is properly done as per welding process. Daily co-ordinate with all Fitters, welders, Welding Operators, supervisors, QC Engineers & QAC Head. Study of Product Drawing and Identify QA procedures, PS, PQR & Welders Qualifications. Support to Vendors for improving quality & welding development in our product at vendor place. Track progress of customer submitted QA & Welding documentation and take approval. Work on Rework cost & welding consumable cost reduction. Prepare, reviewed & maintained ISO & ASME related welding documents. • Experience, Knowledge & Skills: Knowledge of Basic IBR, ASME standards & Welding metallurgy. Knowledge of Heat Treatment. Knowledge of welding defects and interpretation. Knowledge and Interdependencies of various activities for setting up the all QA& welding activity & co-ordinate with QAC Manager. Basic knowledge of properties of CS, AS& SS materials. Knowledge of selection of welding consumables. Basic Knowledge of NDT required (Minimum VT, RT& PT). Knowledge of Fabrication of carbon steel, Alloy Steel &SS. Knowledge of Standards IBR, ASME, BS, EN. Knowledge of preparation of welding procedures as per International standards. Knowledge of ASME U, S, R stamp Pressure vessels.