18 Ppes Jobs

1. Ensure the implementation of the EHS management system and norms as per the IMS and EHS manual, respectively. 2. Identify the training needs, designing and imparting training for staff, visitor, sub-contractor, and workmen. 3. Monitor the evaluation of compliance to legal requirements as identified by the cluster EHS manager at the prescribed frequency. 4. Conducting periodical site EHS inspections & report the finding for corrective action. 5. Review & appraise the site EHS performance and facilitate for improvement. 6. Ensure the proactive performance monitoring through systems such as key performance indicator on EHS. 7. Organize campaigns, competitions & other special emphasis programs to promote EHS at workplace 8. Responsible and accountable for the performance of Site EHS stewards within his area. 9.. Co-ordinate the Risk Assessment exercises in their respective area along with Engineer in-charge in preparation of Safe Work Methods for all activities. Appraise the status to EHS in-charge for updating project risk management register. 10. Conducting investigation of all incidents & initiate necessary corrective actions at sites. 11. Analyze incident trends & initiate necessary corrective actions at sites. 12. Act as a catalyst for establishing, implementing & maintaining emergency preparedness and response procedure at project sites. 13. Reporting the site EHS performance. 14. Accountable for appraising the management for project EHS plan implementation. 15. Conduct EHS inspections as per monthly schedule. 16. Prepare and sent to weekly & monthly report to Hq 17. Verify the quality of PPEs & safety gadgets.

The Engineering Department at Zydus Biotech Park in Changodar, Ahmedabad is looking for a qualified candidate for the position of Executive/Senior Executive - Instrumentation. The ideal candidate should hold a B.E. degree in Instrumentation and Control with 3 to 5 years of relevant experience. As an Executive/Senior Executive - Instrumentation, your primary responsibilities will include conducting preventive maintenance of plant/process equipment, performing calibrations, and ensuring the qualification of equipment and SCADA systems in compliance with 21 CFR guidelines. You will also be responsible for troubleshooting SCADA, PLC, and instruments as needed. Additionally, you will be in charge of maintaining Quality Management System (QMS) and Good Manufacturing Practices (GMP) documentation such as log books, records, status labels, preventive maintenance records, deviations, change control, and Corrective and Preventive Actions (CAPA) reports. The ideal candidate should possess knowledge of various process equipment including Autoclaves, Bio-reactors, fermenters, and Lyophilizers. Experience in implementing safety procedures and practices such as Lockout-Tagout (LOTO), proper use of Personal Protective Equipment (PPEs), and work permits system is essential for this role.,

As part of the position, you will be responsible for ensuring safety in the workplace by reviewing and closing Unsafe Acts and Unsafe Conditions as identified. You will also provide necessary inputs for closing these issues. It is imperative to prioritize safety measures during equipment operation, material handling, and forklift operation. Ensuring that all employees use Personal Protective Equipment (PPE) is crucial for maintaining a safe working environment. Your role will also involve understanding and implementing various machining processes, including knowledge of Conventional and CNC machineries. You will be tasked with maintaining machinery accuracy levels, designing jigs and fixtures, establishing inspection methods, and handling measuring equipment and calibration. In addition, you will be involved in the manufacturing of both new and existing products. This includes activities such as new product development, feasibility studies, modeling, design, and drawing extraction. You will also be responsible for tasks like reverse engineering, simulating product drawings, and planning production schedules. Monitoring and updating the progress status of new products, establishing new product processes, and conducting inspections are key components of this role. Furthermore, you will be expected to focus on continuous improvement in ongoing processes, monitor the effectiveness of processes, and upgrade them as needed. For product servicing, you will ensure that designing activities align with provided specifications and provide input for modifying existing products. Calculating product and man-machine running hours costing will also be part of your responsibilities. Overall, your role will involve a combination of safety management, machining process knowledge, new product development, and quality assurance to contribute to the overall efficiency and effectiveness of the manufacturing operations.,

1.Ensure the implementation of the EHS management system and norms as per the IMS and EHS manual, respectively. 2. Identify the training needs, designing and imparting training for staff, visitor, sub-contractor, and workmen. 3. Monitor the evaluation of compliance to legal requirements as identified by the cluster EHS manager at the prescribed frequency. 4. Conducting periodical site EHS inspections & report the finding for corrective action. 5. Review & appraise the site EHS performance and facilitate for improvement. 6. Ensure the proactive performance monitoring through systems such as key performance indicator on EHS. 7. Organize campaigns, competitions & other special emphasis programs to promote EHS at workplace 8. Responsible and accountable for the performance of Site EHS stewards within his area. 9.. Co-ordinate the Risk Assessment exercises in their respective area along with Engineer in-charge in preparation of Safe Work Methods for all activities. Appraise the status to EHS in-charge for updating project risk management register. 10. Conducting investigation of all incidents & initiate necessary corrective actions at sites. 11. Analyze incident trends & initiate necessary corrective actions at sites. 12. Act as a catalyst for establishing, implementing & maintaining emergency preparedness and response procedure at project sites. 13. Reporting the site EHS performance. 14. Accountable for appraising the management for project EHS plan implementation. 15. Conduct EHS inspections as per monthly schedule. 16. Prepare and sent to weekly & monthly report to HQ 17. Verify the quality of PPEs & safety gadgets.

About Rentokil PCI About the Role: The JM Supervisor is responsible for managing a team of technicians and delivering quality Termite services, optimising material consumption and service excellence through them. The incumbent will report to the OM / AOM/ Sr OE and will have to work as part of a multi-functional team and this involves collaboration with the internal team and external stakeholders. Job Responsibilities: Manage a team of technicians and deliver Service Excellence through a team. Ensure contractual obligations to our customers are met; ensuring consistently high standards of workmanship are delivered. Supervision of Termite jobs, SMEs jobs in absence of TSPO jobs, and supporting Solo Technicians if required (Should not be utilised for Office work) Issue of materials, chemical, Fuel and monitoring & optimising consumption. Verify physical stock and ensure the same is matching with NAV once in 15 days. Prepare Bags and Materials for technicians one day in advance for next days schedule, by taking the next day schedule from Planner daily @ 3 pm Allocate technician for daily deployment in coordination with SPs as per OTOZ Expected reduction in material consumption at site and in route to optimum utilisation of resources Inform BM/OM for non moving material each month. Monitor material expiry dates and inform OM/BM min 3-4 months in advance. Update OE on surplus stock / near to expiry & Prepare indents Physical stock taking at branch and at customer sites Ensure store remains clean and in neat condition PPE distribution check and issue Check service quality when on supervision & surprise visits Supervise termite jobs and optimise ToS for termite jobs Improve quality of Termite jobs to reduce complaints Encourage more technicians to submit leads Key Result Areas: Control & reduction in material cost Effective utilisation of Squad and Improve Termite ToS TSPO- Complaint reduction Increase in nos. of Technicians submitting leads Streamline PPEs usages and stores material issue & receipt Competencies (Skills essential to the role): Proven for his skills in various PMS SCP operating knowledge Assertive, Self Confident and Team player Positive Attitude Tak

About the Role: The Technician is responsible to formulate and carry out a concise and successful treatment against PEST in a specified area, making use of the full range of techniques and preparations available The person will report to the Branch Manager / Operations Manager. The incumbent will have to work as part of a multi-functional team and this involves collaboration with the internal team and external stakeholders. Job Responsibilities: Ensure safety of self and others including machines, equipment, etc. at office, at customer s place or anywhere as the case may be. Ensure customer s satisfaction by way of providing quality services, good behavior or any other means. Adhere to grooming code and use proper uniform as per company policy. Check your schedule for the day at the commencement of work and attend the jobs as per given time schedule. Ensure proper record keeping by way of documentation or the new systems if any introduced by the company. Ensure SCP is used for all jobs assigned. Select correct preparation & add accurate quantity of preparation by selecting appropriate UOM (Unit of measurement). Generate service leads at every possible opportunity. Keep your bag ready with correct working equipment and chemical / material for the day s job. Ensure proper behavior, discipline while on duty at the office, at customer s place or anywhere as the case may be. Reporting at customers premises in time in a presentable manner. Introduce yourself and present your identity card after greetings. Inspect the premises that are to be treated for the pest problems being faced by the customer. Deliver the service as per findings of the inspection, training given as per our PMP and as per instruction given by OE. Ensure proper & optimum usage of chemicals issued, reduce wastage and avoid misuse of the same. Clean the premises if service generates any residue like dust and spillages. Inform customers about Do s and Don ts about pest and pest prevention measures. Obtain a job completion signature from customers before leaving Record chemicals consumed for the respective service / job wise. Maintain (minor repairing) own equipment and ensure cleanliness of the same. Use proper PPEs as recommended per type of job. Handle chemicals as per safety policy. Strictly adhere to the safety instructions wherever given. Help in BTL activity while on the job. Reporting any new developments / changes found in the market and any other related information on Pest Management during regular or monthly operations meetings. Ensure carrying of Inspect-kit and use them at appropriate places. Do not take alcohol, prohibited drugs, pan, gutka etc. and do not smoke while on duty. KEY DELIVERABLES Ontime service execution Maintenance of material, chemicals & equipment Following Safety Processes CORE COMPETENCIES Positive Attitude Well Groomed Problem solving Teamwork Time Management Flexibility & Adaptability Communication (Customer & Internal Interactions) in local language and preferably basic English EDUCATIONAL / OTHER REQUIREMENTS Able to read the basic instructions and write the basic reports Able to handle the company applications on the devices Willingness to travel in the assigned area Should be ready to work in shifts as and when required by the branch. Two wheeler with valid license. What can you expect from RPCI? Our values lie at the core of our mission and vision. We believe that it s our people who make our company what it is. We believe in: Safety Integrity Innovation Learning & Development Open & Transparent Performance Orientation DEI statement: At RPCI, we believe in commitment to build an inclusive, varied workplace welcoming to people of all backgrounds.

The POWERCON Group, an Indian MNC, is a Total Solution Provider for Renewable Energy Project Development, Construction, and Lifetime Operations. Our flagships POWERCON Ventures and PowerSun, along with specialized SBUs, constitute a 360-degree RE eco-system serving domestic and global markets in the Renewable Energy delivery chain. We manage a Wind & Solar service portfolio exceeding 2.5 GW of Operations, 0.75 GW of Construction, and 0.5 GW of Development nationwide. Globally, we oversee 40+ GW of Wind, Solar, BESS assets across 23 countries under remote asset management. With an order book of INR 350+ Crs, we aim to reach an INR 1,000 Crs mark, aligning with India's ambition to achieve 500 GW of clean energy by 2030. Renewable Energy is a rapidly growing segment, and India is ranked 3rd globally, offering vast career opportunities in the Wind and Solar sector. As a Site Lead in Operation & Maintenance (O&M) at our wind farm in Shajapur, Madhya Pradesh, you will be responsible for leading routine O&M activities, ensuring on-time booking of service orders and materials in ERP, releasing monthly site performance reports, achieving productivity and machine availability targets, maintaining ISO documentation standards, interacting with customers, promoting good HSE practices, managing spares for maintenance, ensuring availability of PPEs and tools, monitoring the wind farm via SCADA, and facilitating customer audits and visits. To qualify for this position, you should hold a Degree/Diploma in Electrical/Electronics/Instrumentation/Power Electronics Engineering from a renowned university/college, along with 10 to 15 years of operational experience in a large-scale industry involved in Wind turbines operations, preferably with OEM/IP. The work location will be at our site in Shajapur, Madhya Pradesh. Your compensation and benefits package will be competitive and based on your qualifications and experience, including performance-based incentives and group health insurance. Key success metrics for this role include reducing O&M costs, constant monitoring of sites to prevent loss of spares or equipment, conducting energy audits, and reducing power loss through continuous monitoring and review. Join us at POWERCON Group, where you can contribute to the growth of renewable energy and build a rewarding career in the dynamic Wind and Solar industry.,

Ensuring preparation of project plan for execution of the job with well-defined scope of work, interface of vendors and Technical Recommendation for materials and services and resource planning. Implementing projects as per plan to achieve agreed parameters and delivery timelines. Ensuring quality of all execution activities. Ensuring optimum deployment and utilization of resources (manpower, materials, equipment) Inculcating safety culture through use of PPEs and safe work processes to minimize safety incidents and eliminate accidents. Ensuring obtaining necessary licenses and approvals for execution and commissioning of the project through submission of relevant documents to the concerned government departments Ensuring that all service providers, vendors and technology suppliers comply with relevant statutory provisions with respect to manpower, equipment, materials and processes they deploy during project execution Requirements : Exposure in Project management, Copper foil technology

About Rentokil PCI About the Role: The JM Supervisor is responsible for managing a team of technicians and delivering quality Termite services, optimising material consumption and service excellence through them. The incumbent will report to the OM / AOM/ Sr OE and will have to work as part of a multi-functional team and this involves collaboration with the internal team and external stakeholders. Job Responsibilities: Manage a team of technicians and deliver Service Excellence through a team. Ensure contractual obligations to our customers are met; ensuring consistently high standards of workmanship are delivered. Supervision of Termite jobs, SMEs jobs in absence of TSPO jobs, and supporting Solo Technicians if required (Should not be utilised for Office work) Issue of materials, chemical, Fuel and monitoring & optimising consumption. Verify physical stock and ensure the same is matching with NAV once in 15 days. Prepare Bags and Materials for technicians one day in advance for next days schedule, by taking the next day schedule from Planner daily @ 3 pm Allocate technician for daily deployment in coordination with SPs as per OTOZ Expected reduction in material consumption at site and in route to optimum utilisation of resources Inform BM/OM for non moving material each month. Monitor material expiry dates and inform OM/BM min 3-4 months in advance. Update OE on surplus stock / near to expiry & Prepare indents Physical stock taking at branch and at customer sites Ensure store remains clean and in neat condition PPE distribution check and issue Check service quality when on supervision & surprise visits Supervise termite jobs and optimise ToS for termite jobs Improve quality of Termite jobs to reduce complaints Encourage more technicians to submit leads Key Result Areas: Control & reduction in material cost Effective utilisation of Squad and Improve Termite ToS TSPO- Complaint reduction Increase in nos. of Technicians submitting leads Streamline PPEs usages and stores material issue & receipt Competencies (Skills essential to the role): Proven for his skills in various PMS SCP operating knowledge Assertive, Self Confident and Team player Positive Attitude Tak

About Rentokil PCI About the Role: The Technician is responsible to formulate and carry out a concise and successful treatment against PEST in a specified area, making use of the full range of techniques and preparations available The person will report to the Branch Manager / Operations Manager. The incumbent will have to work as part of a multi-functional team and this involves collaboration with the internal team and external stakeholders. Job Responsibilities: Ensure the safety of self and others including machines, equipment, etc. at the office, at the customer s place or anywhere as the case may be. Ensure customer satisfaction by way of providing quality services, good behaviour or any other means. Adhere to the grooming code and use proper uniforms as per company policy. Check your schedule for the day at the commencement of work and attend the jobs as per the given time schedule. Ensure proper record keeping by way of documentation or the new systems if any introduced by the company. Ensure SCP is used for all jobs assigned. Select the correct preparation & add an accurate quantity of preparation by selecting the appropriate UOM (Unit of measurement). Generate service leads at every possible opportunity. Keep your bag ready with the correct working equipment and chemical/material for the day s job. Ensure proper behaviour, and discipline while on duty at the office, at the customer s place or anywhere as the case may be. Reporting at customers premises on time in a presentable manner. Introduce yourself and present your identity card after greetings. Inspect the premises that are to be treated for the pest problems being faced by the customer. Deliver the service as per findings of the inspection, training given as per our PMP and as per instruction given by OE. Ensure proper & optimum usage of chemicals issued, reduce wastage and avoid misuse of the same. Clean the premises if the service generates any residue like dust and spillages. Inform customers about Do s and Don ts about pest and pest prevention measures. Obtain a job completion signature from customers before leaving Record chemicals consumed for the respective service/job wise. Maintain (minor repairing) own equipment and ensure cleanliness of the same. Use proper PPEs as recommended per type of job. Handle chemicals as per safety policy. Strictly adhere to the safety instructions wherever given. Help in BTL activity while on the job. Reporting any new developments/changes found in the market and any other related information on Pest Management during regular or monthly operations meetings. Ensure carrying of Inspect-kit and use them at appropriate places. Do not take alcohol, prohibited drugs, pan, gutka etc. and do not smoke while on duty. Key Result Areas: Ontime service execution Maintenance of material, chemicals & equipment Following Safety Processes Competencies (Skills essential to the role): Positive Attitude Well Groomed Problem-solving Teamwork Time Management Flexibility & Adaptability Communication (Customer and internal Interactions) in local language and preferably basic English Educational Qualification / Other Requirement: Able to read the basic instructions and write the basic reports Able to handle the company applications on the devices Willingness to travel in

1. Coordinate with Plant people to unsafe condition, unsafe act and near miss and investigate accident, incident. 2. follow safety SOP/ Policy / SEP and safety protocol to follow procedure strictly. 3. Identify noncompliance towards EHS regulations and complete make 100% compliance. 4. Strive for zero critical / Major findings during EHS compliance audits, Statutory Audits and implement best practices for EHS. 5. Timely submission of statutory submission, licenses, safety audit, Onsite emergency plan, safety audit observations and drawing . 5. Give training to all employees for safety subjects and tool box training to all employees and contract workmen. 6. Identify the abnormality in EMS system and inform to superior. 7. Co ordination with engineering dept. for attending the breakdown in EMS system . 8. Maintain All record in printed log book as per prescribed format of EHS dept. 9. Preparation of monthly EMS performance report. Authorised work permits system. 10. Maintain all the logbooks fire extinguishers, fire hydrant system, hose reels, SCBA Set, air line respirators and other safety PPEs track records. 11. Corrective and preventive action to avoid any accident , incident near miss and rectify. 12. To conduct safety committee meeting, mock drill. fire drill and maintain record, Risk Assessment, HIRA, HAZOP. 13. Other work as assigned by HOD time to time.

Field Engineer is responsible for all supervising of site activity and preparing plans with daily activity, conduct site surveys of new sites. The Filed Engineer is responsible for the timely reporting and replacement of damaged PPEs, preparing consolidated material requests, sharing mandatory site photos of different sages, ensuring safety compliances etc. Role and Responsibilities Conduct Site Survey for Newly allocated sites. Prepare a layout of plot marked with boundaries, setback to the civil structures. Prepare site plan with daily activity and manpower requirement. Prepare a consolidated material request. Share mandatory site photos of different stages during the work. Pre-plan arrange the materials, tools, other equipments to avoid unwanted delay and idle time. Record duty time over time of labours. Take pre-approval record over time / night work at site. Ensure all safety requirements are followed for every work. Educate labours about importance of safety precautions and mandates at site regularly. Do support make arrangement for safety audit by safety spoke, in different stages of work. Report and replace the damaged PPEs on time. Identify suppliers and service providers during site survey and negotiate with them for reasonable price in order to control expense at site and increase profitability. Arrange necessary accommodation facility for site team as per company standard policy. Plan and arrange all the items for a work in a single purchase to avoid multiple transportation. Minimize the usage of rented tools. Identification of additional works at site and plan submission to the reporting person. Co-ordinate with clients and maintain relationship. Ensure all audit documents are collected after completion of client audit at different stages of work. Qualifications and Education Requirements Diploma/ITI with min. 3 Year Experience. Basic Knowledge of Telecom Experience in Telecom site supervising Preferred Skills Willingness to Travel across the state. Good communication and interpersonal skills capable of maintaining strong relationships. Strong organizational and multi-tasking skills. Good analytical and problem-solving abilities. Diligent with great attention to detail. Basic Knowledge in MS Office. Job Category: FTC Job Type: Full Time Job Location: Karnataka Department/Group:: Indus Apply for this position Allowed Type(s): .pdf, .doc, .docx By using this form you agree with the storage and handling of your data by this website. *

JOB DESCRIPTION Quality Control Manager Designation: Manager 1 Location: Panoli, Gujarat Department: Quality Control Group/Area: GC section and Working standard section Work planning, distribution and monitoring of GC section and working standard section. LIMS template preview and Instrument method preparation and updation in Empower. To initiate Laboratory event/out of specification /out of trend /Deviations/change control in the Track Wise and perform investigation as per the SOP. To ensure working standard qualification activity. To ensure procurement activity and availability of Reference standards/Impurity Standard/GC standards/GC columns. To ensure cleaning of Instrument, work place and Laboratory Training given to subordinates To ensure PPEs as per work requirement and maintain safety in laboratory Other activities instructed from time to time.

Machine Operator Business Group: Actuation Technologies Primary Work Location: EIMC, Talegaon Job Summary: Issuing material to the Production / internal customers as per the production plan and to complete daily tasks productively and has also trained new operators on 9-meter & all 6-meter stacker equipment. In this Role, Your Responsibilities Will Be: Provide service to operate stackers & critical material handling equipment s. Issuing material to the Production / internal customers Movement of received material at predefined location. Issue of material as per work order, bill of material (BOM) as per work order to assembly. Identification and reporting of Unsafe Act, Conditions, near miss onetime and ensure action on it related to stackers. Use PPEs and safety belts and ensure proper disposal of Wastage Release material to shop floor according to requirement and plan. To follow safety guidelines & norms while material movement on shopfloor. Who You Are: You quickly and decisively act in continually evolving, while kitting material in Warehouse. You always keep the end in sight; puts in extra effort to meet internal customer urgencies before deadline. You need to highlight/inform issues related to material handling equipment about warehouse related. For This Role, You Will Need: ITI / Any graduate Required driving License mandatory as per Act. Experience in WH material movement activity. Ability to handle multiple priorities and meet deadlines. Preferred Requirements: Expert in warehouse related crucial material handling equipment. Independently handling of 9 meters & 6-meter stackers. Our Culture & Commitment to You . .

Implement approved SHE Plan (Process, Procedure, Work Instruction, Audit Checklist, Programs) Assesses risk associated with activities and determine the control measures. Ensure compliance with the requirements of work permit system. Ensure compliance with statutory SHE requirements. Ensure the screening & pre-employment medical examination of workmen is effectively implemented by site admin and execution team. Ensure SHE induction, PPEs and ID card, 16 Hrs. Training is provided for all staff and workmen before deployment at site. Report and investigate all accidents / incidents and near misses. Maintain requisite medical aids / firefighting equipment. Ensures all health & well-being facilities (like drinking water, temporary rest shelter, toilets / urinals etc.) provided at the worksites. Plan and conduct Internal Safety & Health Management training programs, job-specific / hazardous work activities trainings and Occupational health & well-being programs to site personnel & workmen and promote awareness. Display and communicate SHE alerts, Directives, Do s & Don ts among the site personnel & workmen for creating wide awareness. Ensure use of PPEs as per the guideline Convene Project SHE Committee meeting & circulation of MOM & follow-up action. Co-ordinate on purchase and quality control activities related to PPE / safety items. Total Experience - Total 10- 15 years, Similar work- 3 years

Manage Drone based Pilot rope pulling as per the SOP: Lead site execution activities for pilot pulling work. Ensure effective communication within internal external stakeholders. Ensure 100% work as per QHSE standards during charged uncharged conditions. Coordinate with the client to ensure targets are achieved as planned. Ensure site compliances as per local utility client requirements. Ensure ground liaison with local stakeholders to avoid work interruption Ensure close coordination among Drone pilots, fitters technicians for work completion as per the guidelines. Office Based (Planning Coordination): Generate weekly monthly MIS in collaboration with the India Office. Ensure daily weekly work plans in line with the work schedule. Plan vs Actual need to be governed, catch up plans need to be ensured. Ensure 100% QHSE Standards: Lead safety quality protocols at site, ensure daily tool box talk. Ensure all Safety PPEs first aid kits at site during work execution. All site related compliances need to be ensured documented during charged discharged working conditions.

Manage Dro ne based Pilot rope pulling as per the SOP: Lead site execution activities for pilot pulling work. Ensure effective communication within internal external stakeholders. Ensure 100% work as per QHSE standards during charged uncharged conditions. Coordinate with the client to ens ure targets are achieved as planned. Ensure site compliances as per local utility client requirements. Ensure ground liaison with local stakeholders to avoid work interruption Ensure close coordination among Drone pilots, fitters technicians for work completion as per the guidelines. Ensure 100% QHSE Standards: Lead safety quality protocols at site, ensure daily tool box talk. Ensure all Safety PPEs first aid kits at site during work execution. All site related compliances need to be ensured documented during charged discharged working conditions.

Key Roles Responsibilities 1. To look after day-to-day maintenance of equipment s condition 2. Co-ordination with Production Officers in shift to solve any maintenance problems. 3. Maintaining the Shift fitter Log Book. 4. Delegation of work to workmen as per planning attending to breakdown jobs. 5. Preparation of over time, daily attendance of the shift employees and sending it to time office. 6. Documentation of work orders as prescribed. 7. Shift log book checking . work distribution to next shift workmen. 8. Ensuring the completion of the breakdown, planned jobs and cross verifying the same. 9. Ensure Safe working conditions and clean environmental practices. 10. Monitor usages of PPEs, respiratory protection equipment and ensure maintenance cleanliness. 11. Observe unsafe acts and conditions and take corrective preventive actions immediately. 12. Impart SHE training to operators, helpers and contract workers. 13. Act as SHE core Team members (HOD to identify the SHE Core Team Members). 14. Report any incident/accident/ near miss/ illness to the superiors. 15. Identify unsafe conditions and unsafe acts and report to superiors. 16. Also responsible for the work of senior in the absence of senior. 17. As per schedules preventive maintenance of all equipment s must be complete in time 18. Update the history records 19. Conducting trainings to the team B. Tech (Mechanical)