12 Oscilloscopes Jobs

In your new role you will: As an Analog & Mixed-Signal Verification / Validation Engineer for power products you will work with design, application, and systems teams to generate test requirements and define test methodologies. Plan and participate in future technologies and projects. Designing of the boards required for testing Power ICs consideringpower and signal integrity aspects. Measurement of datasheet parameters for Power IC s(Controllers,drivers, current sensors) Debug issues related to IC functioning and parametric failures, androot causing the issues with help of design team. Usage of different type of instruments used in LAB (DMM,Oscilloscopes, Power Supplies, AFG etc) Drive innovation in the form of new advancements (test methods/tools,test automation, test infrastructure) Development of Python Scripts for Test Automation. Collating measurements data and analysing it to find anomalies, trends and identify potential issues in design. Work with Test/Product teams in debugging and correlating the resultsbetween the ATE and Bench platforms. You are best equipped for this task if you have: A Master s /bachelor s degree in Electrical/Electronic Engineering or equivalent field of studies. Relevant 5 years of experience in Analog and Power products Verfication / Validation Good Analytical skills and understanding of Analog Circuits Experience in board layout designing in Altium/Cadence allegro. Experience in development of scripts in Python for Test automation will be plus. Excellent problem-solving and communication skills. Ability to work effectively in a collaborative team environment. Detail-oriented with a commitment to quality and precision with fluency in English

Position Responsibilities Design Special Test Equipment (STE) or Automatic Test Equipment (ATE) solutions for formal testing of end products at the circuit card level, LRU level or System level Hand on experience in Zuken & Mentor graphics tools on Rack Wiring and harness design, Obsolescence management of existing ATE design, should be excellent with Schematics capture tools, Layout tools, & Harness Design & layout Drive test program execution, maintaining a baseline to scope, cost and schedule, while looking for improvements Knowledge on NI hardwares, DAQ Module & Sensor selection, Trouble shooting and Testing for ATE. Work directly with Technical Leads, Product Leads, and customers to support technical team meetings and progress reports. Participate in and lead Failure Review Board investigations Create and/or review test plans, test procedures, and test reports Perform prototype, design verification testing (DVT) and formal qualification testing. End-to-end development of STE/ATE that includes analyzing the test requirements, understanding various measurement and test instruments involved in the test, analyze their characteristics, identify the communication requirements, support hardware-software integration, system integration, system test, build and deployment. The candidate will also be required to produce documentation at every stage of the software development life cycle. Candidate must be a self-starter with a positive attitude, high ethics, and a track record of working successfully under pressure in a time-constrained environment. Work collaboratively with very strong teaming skills. Must be willing to work flexible hours (early or late as needed) to interface with Boeing personnel around the world. Develop and maintain relationships / partnerships with customers, stakeholders, peers, and partners to develop collaborative plans and execute on projects. Proactively seek information and direction to successfully complete the statement of work. Employer will not sponsor applicants for employment visa status. Basic Qualifications (Required Skills/Experience): A Bachelors degree or higher is required as a BASIC QUALIFICATION Experience with RF test equipment (ExamplesSpectrum Analyzers, Signal Generators and Network Analyzers, Switch matrix) Experience with standard laboratory test equipment (ExamplesAC and DC power supplies, oscilloscopes, multimeters) Experience on wire harness design on mentor graphic and Zuken Experience on PCB design & development Experience on BOM preparation & Obsolescence management Required Basic fundamental idea Mechanical rack design Experience on military and Aerospace connector selection Experience performing formal Qualification testing (ExamplesDO-160, MIL-STD-810, MIL-STD-461) Experience with software development, simulation tools as well as various programming languages (C++, C#, VB etc.) primarily used in instrument communication and control Hands on experience and knowledge on test engineering application software such as NI LabVIEW and TestStand. Good knowledge on various types of measurement and test equipment is a must (dimensional, electrical, electronic, thermal, etc.) Experience with automated test equipment, avionics, aerospace programs is a plus. Experience or knowledge of RS422/RS232, ARINC interface knowledge, TCP/IP & Ethernet, UDP and such communication standards, protocols and/or interfaces is desirable Strong verbal and written communication skills Ability and willingness to work with a global team, at flexible hours Self-motivated and go-getter attitude Must be flexible, with a high tolerance for organizational complexity and ability to work with team members across different cultures and time-zones Preferred Qualifications (Desired Skills/Experience) Bachelor, Master of Science degree from an accredited course of study, in engineering, in the field of Instrumentation, Electrical or Electronics. Awareness of AS9100 or ISO9001 quality management system and ISO 17025 standard. Typical Education & Experience Education/experience typically acquired through advanced education (e.g. Bachelor) and typically 9 to 12 years related work experience or an equivalent combination of education and experience (e.g. Masterss with 8 to 11 years of related work experience, etc.). Relocation This position offers relocation based on candidate eligibility. At the highest level, diversity and inclusion are part of Boeing's values. Having diverse employees, business partners and community relationships is vital to creating advanced aerospace and defense products and services for our diverse customers around the world. The company's commitment to diversity means providing a work environment for all employees that is welcoming, respectful and engaging, with opportunities for personal and professional development. Visa Sponsorship Employer will not sponsor applicants for employment visa statu

At TE, you will unleash your potential working with people from diverse backgrounds and industries to create a safer, sustainable and more connected world. Job Overview The Sr. R&D/Product Development Engineer will be responsible for Design & Development of RF circuits/modules for RFoF (Radio Frequency Over Fiber) products for Aerospace, Defense & Marine Market requirements. The Sr Engineer will work closely with global and local cross functional teams to develop products by translating a customer requirements into a product requirement, work through the development cycle including testing, approval and release into Production. Responsibilities Design and analysis of RF and/or Mixed Signal hardware, define RF link architecture Conduct detailed electrical design, supporting prototype and final hardware build & test Carry out component selection, schematic capture and PCB layout of parts Lead RF hardware projects from design to test to delivery through proper design methodology. Ensure on time delivery and first time right approach in all the project deliverables. Work with local and global counterpart / stake holder for ensuring quality deliverable and project execution. Interface with system, mechanical, software, and other engineers for ensuring design and task completion Work closely with third party vendor / supplier to define the technical requirements for the product and project execution. Mentor the new team members on design and development of RF product design Required Skills Education/ Knowledge: BE/BTech with specialization in Electronics & Communications Engineering Min 10 years of experience in RF Microwave board design and development Critical experience: Experience with RF Microwave design for aerospace & defense applications Handson with LNA and RF PA design and functional testing RF link loss analysis for transceivers and RADAR applications Experience with ADS or Microwave Office, Cadence, Sonnet and HFSS software applications Familiarity with standard test equipment such as oscilloscopes, power meters, logic analyzers, signal/spectrum analyzers, etc. Familiarity with EMI/EMC requirements, qualification processes and electronics documentation Knowledge of RF module applications such as RADAR, Satcom, C5ISER, EW Familiarity with optical transceivers will be an added advantage COMPETENCIES Technical capabilities: Expert functional/domain knowledge Strong Technical Aptitude with Willingness to learn new Technologies quickly. Competencies

Expertise in Electrical Bench Characterization Expertise in Electrical performance validation: PCIe Gen5, LP / DDR4 / 5, Ethernet (10G/25G) Expertise in BERTs, VNAs, Oscilloscopes, Signal Integrity Expertise in debugging silicon / platform issue Expertise in data analysis / statistics Expertise in Test scripting (LabVIEW / Python preferred) Expertise in test automation Expert level proficiency (Oral + Written) in Chinese language is mandatory incase Beijing, Taiwan and Vietnam are the preferred work locations Preferred resources with valid regional work permit.

Key Responsibilities: Embedded Firmware Architecture/Code Design Development and integrate software for embedded Linux/RTOS platforms, including applications, device drivers, and kernel components. Communication Stack Development Develop and integrate GPRS, TCP/IP, and 4G stacks on telematics platforms . System Integration & Troubleshooting Perform system-level integration and debug RF network issues , including timing synchronization, signal strength optimization, and collision resolution. Hardware Collaboration Work closely with the hardware design team for Linux subsystem development and optimization. Technical Documentation Maintain architecture, protocols, and technical specifications documentation. Cross-Functional Support Assist engineering, system testing, and customer support teams in resolving technical challenges. Compliance & Security Ensure adherence to quality and information security standards while following ISMS policies and procedures. Skills: 3 to 7 years of experience in embedded programming . Proficiency in C programming, GCC compiler, and Git . Understanding of MISRA coding guidelines for automotive products. Hands-on experience with Linux, ARM SoCs . Experience using oscilloscopes, analyzers, and other lab equipment . Strong knowledge of network protocols, programming, and Linux kernel/device driver development . Ability to write efficient, reusable, and maintainable code. Experience with issue tracking & project tracking systems (a plus). Understanding of RF networks and concepts (a big plus). Self-motivated, dynamic, and team-oriented individual with a problem-solving mindset.

Job Description B.S.u00A0 Electrical or Computer Engineering required 4+ years of related work experience in healthcare Expert level programming skills in C and C++ for real time environments. Experience developing software in various RTOS environments (e.g. FreeRTOS, VxWorks, Yocto Linux). Experience implementing highly optimized digital signal processing and pattern recognition algorithms. Experience with linear algebra/matrix processing and associated software packages (MATLAB, etc.) Experience estimating and planning software development projects. Experience reading and understanding printed circuit board schematics. Experience using test and measurement equipment, including oscilloscopes, logic analyzers, communication protocol analyzers, and signal generators. Proficiency in Microsoft Office software suite, including Microsoft Visio. Ability to demonstrate strong attention to accuracy and detail. Ability to successfully manage multiple tasks. How we work together We believe that we are better together than apart. For our office-based teams, this means working in-person at least 3 days per week. Onsite roles require full-time presence in the companyu2019s facilities. Field roles are most effectively done outside of the companyu2019s main facilities, generally at the customersu2019 or suppliersu2019 locations. Indicate if this role is an office/field/onsite role. About Philips We are a health technology company. We built our entire company around the belief that every human matters, and we won't stop until everybody everywhere has access to the quality healthcare that we all deserve. Do the work of your life to help the lives of others. u2022 Learn more about . u2022 Discover . u2022 Learn more about . If youu2019re interested in this role and have many, but not all, of the experiences needed, we encourage you to apply. You may still be the right candidate for this or other opportunities at Philips. Learn more about our commitment to diversity and inclusion .

We're Hiring: SSD Validation Test Engineer Location: Hyderabad Experience: 4-6 years Are you passionate about storage technologies and ready to dive deep into SSD validation? Join our team in Hyderabad and work on cutting-edge NVMe and PCIe-based solutions. Key Requirements: 4-6 years of hands-on experience in SSD Validation Strong knowledge of NVMe, PCIe protocols, or NAND Flash 3+ years of Python scripting experience is a must Practical experience in validating NVMe features Proficiency with protocol analyzers and oscilloscopes Strong debugging skills to analyze failures from host logs, test logs, and protocol analyzers Proven problem-solving ability and a drive for optimization Excellent communication skills If you're a detail-oriented engineer with a passion for solving complex issues and improving system performance, we want to hear from you!

Job Title Firmware Engineer Job Description B.S. Electrical or Computer Engineering required 4+ years of related work experience in healthcare Expert level programming skills in C and C++ for real time environments. Experience developing software in various RTOS environments (e.g. FreeRTOS, VxWorks, Yocto Linux). Experience implementing highly optimized digital signal processing and pattern recognition algorithms. Experience with linear algebra/matrix processing and associated software packages (MATLAB, etc.) Experience estimating and planning software development projects. Experience reading and understanding printed circuit board schematics. Experience using test and measurement equipment, including oscilloscopes, logic analyzers, communication protocol analyzers, and signal generators. Proficiency in Microsoft Office software suite, including Microsoft Visio. Ability to demonstrate strong attention to accuracy and detail. Ability to successfully manage multiple tasks. How we work together We believe that we are better together than apart. For our office-based teams, this means working in-person at least 3 days per week. Onsite roles require full-time presence in the company's facilities. Field roles are most effectively done outside of the company's main facilities, generally at the customers or suppliers locations. Indicate if this role is an office/field/onsite role. About Philips We are a health technology company. We built our entire company around the belief that every human matters, and we won't stop until everybody everywhere has access to the quality healthcare that we all deserve. Do the work of your life to help the lives of others. . Learn more about . . Discover . . Learn more about . If you're interested in this role and have many, but not all, of the experiences needed, we encourage you to apply. You may still be the right candidate for this or other opportunities at Philips. Learn more about our commitment to diversity and inclusion .

Job Title: Software Engineer Location: Bangalore Experience: 46 Years in Embedded Aerospace Software Standards: DO-178C Job Summary This is a contract role for a Software Engineer working in the aerospace domain , focused on embedded software development and testing . You will be responsible for ensuring software is developed according to DO-178C safety-critical guidelines. You will work closely with both hardware and systems engineering teams and contribute throughout the software development lifecycle , especially focused on verification and certification . Key Responsibilities – Explained Requirement and Architecture Collaboration Work with Hardware/System Architects to define: Customer Requirements HW-SW Interface Specifications Make sure the software aligns with the hardware and system requirements . Code and Document Reviews Review of artifacts : Software Source Code High-Level & Low-Level Requirements Ensure code and documents follow aerospace standards and guidelines like DO-178C . Test Procedure Development Develop and review: High-level Test Procedures (HLTP) – which define how to test high-level requirements. Test Cases – specific conditions or inputs used to verify proper functionality. Traceability Matrices – documents that link: System Requirements Software Requirements Code Tests. Tool Usage DOORS : Requirements management tool; used for updating and reviewing traceability. PVCS : Version and configuration control system – tracks changes in documents, code, and test results. Mantis Bug Tracker : For logging and closing defect reports. Test Execution and Debugging Execute HLTPs and record results. Use tools like: Logic Analyzers Oscilloscopes DMMs (Digital Multimeters) Debug issues using both Black Box (external functionality) and White Box (internal code structure) testing techniques. Certification & Compliance Documentation Create and review: Software Verification Reports Coverage Analysis Reports SCI (Software Configuration Index) SAS (Software Accomplishment Summary) – critical for DO-178C certification. Mandatory Skills – Explained Educational Qualification Bachelor’s degree in Electronics or Computer Science Engineering . Embedded Aerospace Experience 4–6 years working on safety-critical software for avionics systems. DO-178C Expertise Understand and implement certifiable software development processes . Testing Knowledge Strong in Requirement-Based Testing (RBT). Able to perform Integration Testing , High-level Testing , and Debug Testing . Hardware Interaction Experience with hardware debugging tools like: Oscilloscopes DMMs Logic Analyzers Tool Knowledge DOORS – Requirements traceability. PVCS – Source/configuration control. Mantis – Bug tracking. Communication Must be able to document and communicate findings and test results effectively. Preferred Skills (Nice to Have) Development Tools: IAR , CCS (Code Composer Studio) – popular IDEs for embedded development. Code Coverage Tools: RTRT , HCL DevOps – tools for structural code coverage (used in DO-178C verification). Programming Skills: Strong proficiency in C Programming – foundational for embedded systems. Processor Experience: Knowledge of microcontrollers like ARM Cortex , Microchip PIC , TI DSP , STM32 . Peripheral Interfaces: I2C, SPI, UART, ADC, DAC – required for low-level driver development. Full-Cycle Project Exposure: End-to-end experience in an aerospace project lifecycle – from requirement gathering to certification. Lean Methodology: Exposure to lean/agile development practices – preferred in modern embedded teams.

Job Title : C++ Embedded Developer Location : Across IndiaEmployment Type : Full-TimeRole Overview : As a C++ Developer, you will play a crucial role in designing, developing, and optimizing embedded software that operates in real-time environments. You will collaborate with hardware engineers, product managers, and fellow developers to deliver cutting-edge solutions that meet the highest standards for performance and security. Key Responsibilities : - Embedded Development : Design, implement, and maintain software for embedded systems using C/C++, ensuring it meets functional, performance, and safety requirements. Hardware Integration : Collaborate with hardware teams to interface software with microcontrollers, sensors, and communication modules (SPI, I2C, UART, CAN, etc.). Firmware Development : Build and optimize firmware for various microcontrollers and embedded platforms, focusing on efficiency and reliability. Real Time Programming : Develop software within real time operating systems (RTOS), ensuring responsiveness and compliance with timing constraints. Optimization : Analyze and optimize embedded software for performance, memory usage, and power efficiency in resource constrained environments. Debugging & Testing : Debug and troubleshoot embedded systems using tools like JTAG, logic analyzers, and oscilloscopes. Conduct unit, integration, and system level testing. Documentation : Maintain thorough documentation of software architecture, design choices, and testing procedures. Team Collaboration : Work closely with cross functional teams to ensure seamless integration between hardware and software components. Innovation : Stay up to date with the latest embedded systems trends, technologies, and best practices to continuously improve processes and solutions. Required Qualifications : 3+ years of experience developing embedded software in C/C++. Deep knowledge of embedded systems, microcontroller architectures (e.g., ARM Cortex, PIC), and real time programming. Strong understanding of hardware software interfacing, including device drivers and peripheral communication (UART, SPI, I2C, etc.). Proven experience with embedded debugging tools (JTAG, oscilloscopes, logic analyzers) and development environments. Familiarity with version control (Git) and build systems like CMake or Makefiles. Experience working in resource constrained environments, with a focus on performance and memory optimization. Solid understanding of embedded system security, testing, and validation methodologies. Strong problem solving abilities, attention to detail, and a collaborative mindset.Nice to Have : Experience with wireless communication protocols (Bluetooth, Zigbee, LoRa, etc.). Familiarity with automotive or IoT specific embedded systems. Knowledge of Agile methodologies, particularly in embedded software projects. Experience with cybersecurity practices in embedded systems.

Location : Across India Role Overview : As a C++ Developer, you will play a crucial role in designing, developing, and optimizing embedded software that operates in real-time environments. You will collaborate with hardware engineers, product managers, and fellow developers to deliver cutting-edge solutions that meet the highest standards for performance and security. Key Responsibilities : - Embedded Development : Design, implement, and maintain software for embedded systems using C/C++, ensuring it meets functional, performance, and safety requirements. - Hardware Integration : Collaborate with hardware teams to interface software with microcontrollers, sensors, and communication modules (SPI, I2C, UART, CAN, etc.). - Firmware Development : Build and optimize firmware for various microcontrollers and embedded platforms, focusing on efficiency and reliability. - Real-Time Programming : Develop software within real-time operating systems (RTOS), ensuring responsiveness and compliance with timing constraints. - Optimization : Analyze and optimize embedded software for performance, memory usage, and power efficiency in resource-constrained environments. - Debugging & Testing : Debug and troubleshoot embedded systems using tools like JTAG, logic analyzers, and oscilloscopes. Conduct unit, integration, and system-level testing. - Documentation : Maintain thorough documentation of software architecture, design choices, and testing procedures. - Team Collaboration : Work closely with cross-functional teams to ensure seamless integration between hardware and software components. - Innovation : Stay up to date with the latest embedded systems trends, technologies, and best practices to continuously improve processes and solutions. Required Qualifications : - 3+ years of experience developing embedded software in C/C++. - Deep knowledge of embedded systems, microcontroller architectures (e.g., ARM Cortex, PIC), and real-time programming. - Strong understanding of hardware-software interfacing, including device drivers and peripheral communication (UART, SPI, I2C, etc.). - Proven experience with embedded debugging tools (JTAG, oscilloscopes, logic analyzers) and development environments. - Familiarity with version control (Git) and build systems like CMake or Makefiles. - Experience working in resource-constrained environments, with a focus on performance and memory optimization. - Solid understanding of embedded system security, testing, and validation methodologies. - Strong problem-solving abilities, attention to detail, and a collaborative mindset. Nice to Have : - Experience with wireless communication protocols (Bluetooth, Zigbee, LoRa, etc.). - Familiarity with automotive or IoT-specific embedded systems. - Knowledge of Agile methodologies, particularly in embedded software projects. - Experience with cybersecurity practices in embedded systems.

Location : Across India Role Overview : As a C++ Developer, you will play a crucial role in designing, developing, and optimizing embedded software that operates in real-time environments. You will collaborate with hardware engineers, product managers, and fellow developers to deliver cutting-edge solutions that meet the highest standards for performance and security. Key Responsibilities : - Embedded Development : Design, implement, and maintain software for embedded systems using C/C++, ensuring it meets functional, performance, and safety requirements. - Hardware Integration : Collaborate with hardware teams to interface software with microcontrollers, sensors, and communication modules (SPI, I2C, UART, CAN, etc.). - Firmware Development : Build and optimize firmware for various microcontrollers and embedded platforms, focusing on efficiency and reliability. - Real-Time Programming : Develop software within real-time operating systems (RTOS), ensuring responsiveness and compliance with timing constraints. - Optimization : Analyze and optimize embedded software for performance, memory usage, and power efficiency in resource-constrained environments. - Debugging & Testing : Debug and troubleshoot embedded systems using tools like JTAG, logic analyzers, and oscilloscopes. Conduct unit, integration, and system-level testing. - Documentation : Maintain thorough documentation of software architecture, design choices, and testing procedures. - Team Collaboration : Work closely with cross-functional teams to ensure seamless integration between hardware and software components. - Innovation : Stay up to date with the latest embedded systems trends, technologies, and best practices to continuously improve processes and solutions. Required Qualifications : - 3+ years of experience developing embedded software in C/C++. - Deep knowledge of embedded systems, microcontroller architectures (e.g., ARM Cortex, PIC), and real-time programming. - Strong understanding of hardware-software interfacing, including device drivers and peripheral communication (UART, SPI, I2C, etc.). - Proven experience with embedded debugging tools (JTAG, oscilloscopes, logic analyzers) and development environments. - Familiarity with version control (Git) and build systems like CMake or Makefiles. - Experience working in resource-constrained environments, with a focus on performance and memory optimization. - Solid understanding of embedded system security, testing, and validation methodologies. - Strong problem-solving abilities, attention to detail, and a collaborative mindset. Nice to Have : - Experience with wireless communication protocols (Bluetooth, Zigbee, LoRa, etc.). - Familiarity with automotive or IoT-specific embedded systems. - Knowledge of Agile methodologies, particularly in embedded software projects. - Experience with cybersecurity practices in embedded systems.