78 Ecn Jobs - Page 3

Job Area: Engineering Group, Engineering Group > Systems Engineering General Summary: As a leading technology innovator, Qualcomm pushes the boundaries of what's possible to enable next-generation experiences and drives digital transformation to help create a smarter, connected future for all. As a Qualcomm Chipset Architect, you will research, design, develop, simulate, and/or validate systems-level software, hardware, architecture, algorithms, and solutions that enables the development of cutting-edge technology. Qualcomm Systems Engineers collaborate across functional teams to meet and exceed system-level requirements and standards. Minimum Qualifications Bachelor's degree in Electronics/Electrical Engineering or related field and 6+ years of Systems Engineering or related work experience.ORMaster's degree in Electronics/Electrical EngineeringORPhD in Engineering, Information Systems, Computer Science, or related field Preferred Qualifications Master's Degree in Engineering, Information Systems, Computer Science or related field. 6+ years of Systems Engineering or related work experience. 3+ years of 4G/5G/6G systems and associated cellular standards (e.g., 3GPP NR, LTE, LTE, 3G). 4+ years of experience working in mobile, PC, Automotive or IoT industry; Knowledge of ASIL, FUSA, FMEA, ISO 26262 or IEC 61508 Experience with full product lifecycle from requirements gathering, prototype development, production, knowledge of PCB design flow, EDA tools, electrical and thermal simulations. In depth knowledge of power delivery, PDN, component selection, tuning, PMICs, eBOM Good knowledge of interfaces (USB, PCIe, SD/eMMC, UFS, LPDDRx, eDP, CSI, DSI, SPI, I2C, UART, SPMI, Slimbus etc) Good domain knowledge of two or more functional areas of SoCs such as Application Processor, Neural processing, Display, Graphics, Camera, Video, AI, Modem (4G/5G), WLAN, Power Management etc. Working with a wide cross functional team comprising of various design and software teams, reliability, functional safety, business, sales and customer engineering Principal Duties and Responsibilities Applies Systems knowledge and experience to research, design, develop, simulate, and/or validate systems-level software, hardware, architecture, algorithms, and solutions while ensuring system-level requirements and standards are met. Performs functional analysis to drive requirements and specifications and to define and align with standards for hardware and software. Develops and analyzes system level design including requirements, interface definition, functional/performance definition, and implementation of a new system or modification of an existing system. Collaborates with own team and other teams to complete project work, including implementing and testing features and verifying the accuracy of systems. Develops new and innovative ideas (e.g. IDFs) for a product or feature area. Drives triage of problems at the system level to determine root cause and presents results of testing and debugging to team members. Level of Responsibility Works independently with minimum supervision. Decision-making may affect work beyond immediate work group. Requires verbal and written communication skills to convey information. May require basic negotiation, influence, tact, etc. Has a moderate amount of influence over key organizational decisions (e.g., is consulted by senior leadership to make key decisions). Tasks require multiple steps which can be performed in various orders; some planning, problem-solving, and prioritization must occur to complete the tasks effectively. Minimum Qualifications: Bachelor's degree in Engineering, Information Systems, Computer Science, or related field and 3+ years of Systems Engineering or related work experience. OR Master's degree in Engineering, Information Systems, Computer Science, or related field and 2+ years of Systems Engineering or related work experience. OR PhD in Engineering, Information Systems, Computer Science, or related field and 1+ year of Systems Engineering or related work experience.

Mechanical Design & Development Worked and Involved Design Calculation Experienced in CAD software UG NX, Creo or Solidworks 3D Modelling Knowledge in GD&T Knowledge in PLM Software Sheet Metal design Contact : 9080081258 - Timing : 10 AM to 05 PM

ECN,ECR, BOM management Configuration and change management engineer Experience : 5-9 Years Location : Bangalore

Experience of design and production of drawings work from the water industry or a closely related industry. Pumps part 3D modelling and production of CAD drawings. Good knowledge in Auto CAD.

Role & responsibilities We are looking for candidates with the following skills and experience: Proficiency in Smaragd and NX Hands-on experience with casting, forging, or sheet metal components in NX. Familiarity with Release Processes & Release Procedures Including ECO creation in Truck BOM Planner and ECO release in Safira. Technical Drawing Interpretation Strong understanding of technical drawings and application of Geometric Dimensioning and Tolerancing principles. DMU Checks and Corrections Experience in identifying and resolving DMU issues. Knowledge of 4D Workspace and Sandbox is a plus. Additional Skills (Preferred): Working knowledge of Kinematics and FEA (Finite Element Analysis).

Job Description - Design & Development Engineer Job location: Tambaram, Chennai. About the Company: Gideon Automotive Industries is an auto ancillary unit established in the year 2013. We manufacture Electrical, Electro-Mechanical and electronic components such as solenoid valves, switches, solenoid coil assemblies, and sensors. The majority of the products are proprietary in nature. Gideon follows the latest manufacturing practices, implements IATF 16949 QMS and managed by professionals. Gideon is supplying products to reputed Tier-1 customers and OEM in automobile and non-auto industries in India and oversees. Gideon is growing at a CAGR of 35% since inception and positioned to grow much faster in the coming years. We offer a satisfactory working environment and believe in treating employees as its important asset. Roles & Responsibilities: Responsible for preparing drawing using Solid Works Design Software & Auto CAD. Knowledge of designing / detailing assemblies and sub - assemblies of Products. Knowledge in preparation of layouts, assembly drawings, detailed manufacturing drawings with necessary GD & T, preparation of Bill of material, maintenance of ECN, Drawing Revisions and Change level maintenance. Create and update database of design records for future reference purposes. Perform other design, new product Development activities as required. Knowledge in New Product Development using Customer input and developing products through Reverse Engineering concepts, product life cycle testing, design development activities. Studying existing Products, processes and implementing improvements. Maintenance of design and new product development documents as per IATF 16949 QMS is must. Technical co-ordination with other functional departments like production, purchase, and marketing Participating in CFT meetings, maintaining committed timelines and project files Basic Requirements: Excellent written and verbal communication skills Good proficiency & hands on experience in using MS Office applications. Ability to act and operate independently with minimal daily directions from manager to accomplish the tasks. Share and collaborate effectively with others, create a positive team spirit Desired Candidate Profile: BE Mechanical Engineering / Diploma in Mechanical Engineering qualifications with minimum 6+ years of experience in Automotive industry is preferred. Must have good knowledge in Solid Works & Auto CAD software. Knowledge in PPAP, APQP, DFMEA is preferred. Sound Understanding in GD&T in Customer Drawings. Candidates working in Electromechanical, Electrical and Electronics based product development area are preferred. More specifically Candidates working in Pneumatic and Automobile Sectors will be preferred. Candidate shall be creative, highly detail oriented and organised. Male Candidates are preferred. Candidates from Chennai (In & around Tambaram location) will be given preference. Candidates from MSME units with strong desire to learn and grow with the organisation are preferred.

Job Information Job Opening ID ZR_1777_JOB Date Opened 24/03/2023 Industry Technology Job Type Work Experience 6-10 years Job Title Electronics Engineer City Gurgaon Province Haryana Country India Postal Code 201303 Number of Positions 1 Should have experience on Mixed Signal Design, Analog Circuit Design and Digital Circuit Design Should have experience in working on complete Product Development Life Cycle Should have a strong understanding of Signal and power Integrity phenomena and relevant tools. Should have knowledge of working on micro controllers, microprocessors and FPGAs from various industry manufacturers like TI, STM, Qualcomm, Xilinx, Lattice and others. Should have knowledge of communication protocols like SPI, I2C, USB, UART, CAN, Ethernet, Wi-Fi, RS485 a few to mention. Should possess excellent knowledge of various power regulators like Switching and LDOs. Should have experience of Schematic Design in Altium and Orcad Should have reviewed the layout designs and guided PCB designers for an effective component placement and routing for various designs. Should have worked on Multi-layer board design with minimum 6 layers. Understanding of the layer stack-up definition and its understanding is desired. Should have knowledge of using various electronic tools and instruments like Oscilloscopes, multi meters and others. Should have excellent debugging skills with analytical reasoning. Should have experience in making the designs meet various compliance standards related to safety, ESD, EMI/EMC. Excellent interpersonal, written and verbal communications skills; flexible, self-directed and able to work in a team environment. Knowledge of Change/Configuration Management and ECN processes is a Plus Should possess excellent knowledge of various power regulators like Switching and LDOs. AC to DC Power Supply Design and debugging Should have strong knowledge in working on various motors like BLDC, stepper, etc. Should have strong knowledge of working on Encoders, motor drive........Bold are mandatory skills. check(event) ; career-website-detail-template-2 => apply(record.id,meta)" mousedown="lyte-button => check(event)" final-style="background-color:#2B39C2;border-color:#2B39C2;color:white;" final-class="lyte-button lyteBackgroundColorBtn lyteSuccess" lyte-rendered=""> I'm interested

1+ Year experience in electronic components, life cycle management of component, EOL, Environment compliances(Reach, ROHS), BOM management. Email id- ta6@nippondata.com

Who We Are Applied Materials is the global leader in materials engineering solutions used to produce virtually every new chip and advanced display in the world. We design, build and service cutting-edge equipment that helps our customers manufacture display and semiconductor chips- the brains of devices we use every day. As the foundation of the global electronics industry, Applied enables the exciting technologies that literally connect our world- like AI and IoT. If you want to work beyond the cutting-edge, continuously pushing the boundaries of"science and engineering to make possible"the next generations of technology, join us to Make Possible® a Better Future. What We Offer Location: Bangalore,IND At Applied, we prioritize the well-being of you and your family and encourage you to bring your best self to work. Your happiness, health, and resiliency are at the core of our benefits and wellness programs. Our robust total rewards package makes it easier to take care of your whole self and your whole family. Were committed to providing programs and support that encourage personal and professional growth and care for you at work, at home, or wherever you may go. Learn more about our benefits . Youll also benefit from a supportive work culture that encourages you to learn, develop and grow your career as you take on challenges and drive innovative solutions for our customers."We empower our team to push the boundaries of what is possible"”while learning every day in a supportive leading global company. Visit our Careers website to learn more about careers at Applied. Engineering Change Engineer ITPL, Bangalore Shift Timing- 02:00 PM to 11:00 PM General Profile: Requires specialized in Packaging solution. Interprets internal or external business issues and recommends best practices. Solves problems; takes a broad perspective to identify innovative solutions. Works independently, with guidance in only the most complex situations. : EC Engineer is responsible for the development and management of the Engineering Change Order process for assigned groups and/or product families or lines from documentation of initial problem statement through implementation and execution of the engineering change. Mediates problems across division lines to remove barriers preventing effective implementation of engineering changes. Ensures rapid and efficient processing of ECOs, resulting in cost-effective change implementation. Essential Duties and Responsibilities: Prioritizes Review of ECOs and expedites release of ECO, in the implementation cycle. Review ECOs for content completeness, Structure of Bill of Material, customer impact (internal and external), organizational impact, and functional product impact Determines effect of ECOs on products and processes; adequately ascertains who needs to be included in the evaluation, disposition, assignment, definition, approval, and implementation of the ECO; routes ECOs. Coordinates with other impacted EC analysts; verifies that appropriate CIB (Change Implementation Board) members are included on the ECO based on Product Family, Product Line, Change Category, planner/buyer and product option tree, as applicable. Communicates issues logged with EC Analysts or EC engineers to ensure for correctness of the ECO Analyzes part structure to determine the scope / impact of product changes; conducts where-used searches. Trains / coaches ECO participants in their functional areas; advises ECO participants on possible solutions for ECO related problems, issues or situations; routinely mediates conflicts between ECO participants. Evaluates ECO process for continuous improvement opportunities; assists in KPI development and document the process. Regularly participates in ECO PMs meetings. Participates in projects; may lead a ECO CIB project. Reviewing ECOs and recommending material related changes through the Change Control Board, identifying ECO impacted kits and assemblies and updating ECO notification summary comments to reflect current status. Knowledge: Knowledge of Engineering Change Order (ECO) processes, forms, instructions, and policies Knowledge of ECO roles and responsibilities. Knowledge of PDM and BOMs & item master theory. Knowledge of supplier manufacturing processes and the ability to engage with suppliers to resolve issues. Knowledge of manufacturing methods and materials to include basic lean philosophy and principles. Knowledge of safety procedures and cleanroom protocol. Knowledge of cross-cultural communications. Skills and Abilities: Demonstrated ability to write and track ECOs. Good experience in GD&T Must have experience in UG NX Knowledge of design tools Exposure in Reverse Engineering Good BOM Management skills Exposed to detailing and drawing Expert in drawing Review Working Knowledge on different Engineering change management software packages like, Oracle, SAP etc., Knowledge on PLM software like, TCE (Team Center Engineering), Wind chill. Demonstrated computer skills to include MS Office, Lotus Notes, Visio and/or other software / systems necessary for the performance of the job Project management skills: Ability to work with Cross Functional Teams. Time management skills. Effective negotiation skills. Effective presentation skills. Functional Knowledge: Demonstrates depth and/or breadth of expertise in own specialized discipline or field Business Expertise Interprets internal/external business challenges and recommends best practices to improve products, processes or services Problem Solving Leads others to solve complex problems; uses sophisticated analytical thought to exercise judgment and identify innovative solutions Impact Impacts the achievement of customer, operational, project or service objectives; work is guided by functional policies Interpersonal Skills Communicates difficult concepts and negotiates with others to adopt a different point of view Education: Bachelors Degree in Mechanical/Manufacturing/Automobile 3 to 8 Years of Experience Additional Information Time Type: Full time Employee Type: Assignee / Regular Travel: Yes, 10% of the Time Relocation Eligible: Yes Applied Materials is an Equal Opportunity Employer. Qualified applicants will receive consideration for employment without regard to race, color, national origin, citizenship, ancestry, religion, creed, sex, sexual orientation, gender identity, age, disability, veteran or military status, or any other basis prohibited by law.

Should have real time work experience of 2 to 4 years Part Design Drafting as per ASME std. Well knowledge on manufacturing drawings Knowledge in Design Product Manufacturing process Knowledge is an added advantage Aero domain , UG and QN experience added advantage Geometric Dimension and Tolerances (GD & T) Knowledge Good Communication skills

Responsible for technological improvements in the development process to reduce development time & iterations. Responsible for arranging specifications for Unique/NPD Components. Managing project activities aligning with APQP timing plan.

The SAP PLM role involves working with relevant technologies, ensuring smooth operations, and contributing to business objectives. Responsibilities include analysis, development, implementation, and troubleshooting within the SAP PLM domain.

The SAP PLM role involves working with relevant technologies, ensuring smooth operations, and contributing to business objectives. Responsibilities include analysis, development, implementation, and troubleshooting within the SAP PLM domain.

Looking for 5+ years of experience in Automotive industry Component Engineer will be responsible for developing new or improved designs for interior automotive components using computer-assisted design technology. He will release components and assemblies into the corporate releasing system and manage changes. Will focus to make automotive component parts that are reliable and effective Should have prior experience in various stages of production, starting from research and product development, to compliance and design, or might work on testing and installing components. Analytical, detailed-oriented and have a great interest in technology. Can-do-attitude, a learning and problem solving mindset. Excitement for being part of something new, building a new organization from the scratch. Readiness to accept challenges and push the boundaries. Mind-winning personality with enthusiasm to spread her his knowledge and experience in the team. Good Communication Skills.

Role & responsibilities: : Mechanical engineer with 3-5 Years of experience ( Wind Turbine/Transportation/Off highway) Handling Large assemblies in Creo - Parametric Drafting (2D) Standard & Best Practices CN release in Windchill (Basic Understanding) Knowledge on ECM/ECN Process Design And detailing to manufacture Project Assembly Guides, Process flow manuals. Handling CR, Checklist, Weekly reports, Delivery Trackers etc. Should have experience in working with Structural components and its manufacturing process. CAD Tools AutoCAD, Creo PLM - Windchil /Teamcenter Required Skills: Mechanical Design Creo Windchil

Role & responsibilities : Design and Development of Construction Equipment, Create 3D Models/ Manufacturing Drawings & to ensure the quality of drawings. Create BOM/ ECN for Design Management. Building Prototypes together with Senior Team Members. Value Engineering of Existing Products for performance improvement, ease of manufacturing & cost reduction. Study & Research to keep up with the latest technological trends. Perform design calculations for design verification. Field visits for design assessment & performance validation. Material selection depending on the application, fix proper heat treatment process, GD&Ts. Preferred candidate profile Experience in Construction/ Concrete Equipment will be added advantage.

JOB SUMMARY Under limited supervision, works on complex and detailed projects to create and maintain assembly instructions for the manufacturing operation. ESSENTIAL DUTIES AND RESPONSIBILITIES • Prepares and maintains data storage on the Jabil computer network and master files per ISO standards. • Prepares and implements Engineering Change Orders (ECOs) for manufacturing assembly instructions • Interprets customer documentation, drawings and blueprints for defining manufacturing process flow • Work closely with the process area and engineering to define and streamline process flow • Order stencils as needed, per stencil procedure • Leads the update of SAP routing and production status • Leads the publishing of the weekly and monthly reports of department performance in accordance to established standards • Participate in and support special projects as needed. Project teams may include Agile and SAP • Participate as needed as a team member in the Engineering group • May be required to work overtime • May perform other duties and responsibilities as assigned. JOB QUALIFICATIONS KNOWLEDGE REQUIREMENTS • Ability to effectively present information and respond to questions from groups of managers, clients, customers, and the general public. • Ability to define problems, collect data, establish facts, and draw valid conclusions. • Ability to operate a personal computer including using a Windows based operating system and related software. • Advanced PC skills, including training and knowledge of Jabil’s software packages. • Ability to write simple correspondence. Read and understand visual aid. • Ability to apply common sense understanding to carry out simple one- or two-step instructions. • Ability to deal with standardized situations with only occasional or no variables. • Ability to read and comprehend simple instructions, short correspondence, and memos. • Ability to add, subtract, multiply, and divide in all units of measure, using whole numbers, common fractions, and decimals. • Ability to compute rate, ratio, and percent and to draw and interpret graphs.

Teamcenter customization experience using server side and client side customization, AWC and ITK. Should have hands on experience with ITK, AWC and SOA. Performed AWC development and implementation projects. Strong Techno-Functional skills in Teamcenter. Should have experience on working of Agile Methodology Should have hands on experience of Manufacturing Process Planner, MBOM, EBOM, BOP,PDM. Should be able to understand software requirements and work with minimal guidance. Must have good experience in Active Workspace customization/Configurations. Interfaces with Internal and external customers or vendors regarding software issues for specific project or PLM Application. Should have good functional hold on Various Teamcenter Modules like classification, Cost Management, Change Management, product configurator, Structure Manager, Organization, Document Management, Requirement Management, Classification ACL etc. Should have hands on experience of Any CAD integration(NX,CATIA, Solid Works, Solid Edge or Pro/E or Creo) and Dispatcher configuration. Should have Knowledge about office integration with Teamcenter Good knowledge of SDLC. Primary Skills Teamcenter Customization ITK AWC RAC BMIDE Skills (competencies) Equal Opportunities at frog Frog and Capgemini Invent are Equal Opportunity Employers encouraging diversity in the workplace. All qualified applicants will receive consideration for employment without regard to race, national origin, gender identity/expression, age, religion, disability, sexual orientation, genetics, veteran status, marital status, or any other characteristic protected by law.

Role & responsibilities: Responsible for product design & support to the global clients. Understanding customer requirements, detail design, modelling and drawing release. Responsible for handling Engineering documentation projects. Preparation/presentation of design reports, review part/assembly drawing quality check per standards and project reviews. Ensuring to meet quality and commitment goals. Collaborate with other engineering disciplines, Product Management, manufacturing, purchasing and quality control, regulatory departments as well as suppliers. Follow Engineering Change Management process (ECR/ECO) and execute projects independently. Good communication with stakeholders ESSENTIAL Skills: Good knowledge on engineering concepts. Good knowledge on drawing Standards (ISO, ANSI/ASME) Hands on experience on CAD tool Solid works (Part, Sheet metal, Assembly & drawing modules) and handle large assemblies and configurations. Hands on experience on Sheet metal design DFM & DFA. Good Knowledge on any PDM & PLM tools. Hands on experience on Engineering change management (ECR/ECO) process. Capability to understand/ apply design calculations, Tolerance Stack-up analysis. Able to work on global product development projects independently. Good project planning, communication and interpersonal skills. Self-motivated and highly organized. Problem solving & trouble shooting. Desirable Skills: Knowledge on various sheet metal & plastics manufacturing processes like Plastics injection molding, Sheetmetal stamping, forming etc. Experience in design/development of Plastics, GD&T and simulations. Understanding or experience with DFMEA and PFMEA and Risk Assessment.

Looking for challenging role? If you really want to make a difference - make it with us Siemens Energy is focused on helping customers navigate the world"™s most pressing energy problems. As a world leader in developing and producing the most advanced engineering technologies, we improve lives and further human achievements worldwide, while also protecting the climate - all thanks to our employees. With us, you can do something significant that benefits society and human progress We make real what matters. This is your role Responsible to convert all thermal calculations into construction drawings and Bill of Materials for turbine outer casing , exhaust casing , turbine support , base frames , emergency and control valves In order to meet the design requirement in line with the customer / quality specifications. Work as a team member for maintaining the design process in order to complete engineering drawings, Documents and details for the steam turbine. Also should be able to review complete projects drawings and interface points. Provide support to manufacturing , shop assembly, Quality, Site for resolving critical technical issue by detailed Study & root cause analysis. The desired candidate profile would be a person with B.E. / B. Tech Mechanical or M.E. / M. Tech Mechanical from reputed institute 5-8 Years"™ hands on experience and skill set in AutoCAD / Creo / NX for 3D modelling as well 2D drawings Basic knowledge of steam turbine Team player and able to provide quick solution with engineering judgement We"™ve got quite a lot to offer. How about you? This role is based in Vadodara. You"™ll also get to visit other locations in India and beyond, so you"™ll need to go where this journey takes you. In return, you"™ll get the chance to work with teams impacting entire cities, countries and the shape of things to come. We"™re Siemens. A collection of over 379,000 minds building the future, one day at a time in over 200 countries. We're dedicated to equality and we welcome applications that reflect the diversity of the communities we work in. All employment decisions at Siemens are based on qualifications, merit and business need. Bring your curiosity and imagination, and help us shape tomorrow.

At Siemens Energy, we can. Our technology is key, but our people make the difference. Brilliant minds innovate. They connect, create, and keep us on track towards changing the world"™s energy systems. Their spirit fuels our mission. Our culture is defined by caring, agile, respectful, and accountable individuals. We value excellence of any kind. Sounds like you? Looking for challenging role? If you really want to make a difference - make it with us Can we energize society and fight climate change at the same time? At Siemens Energy, we can. Our technology is key, but our people make the difference. Brilliant minds innovate. They connect, create, and keep us on track towards changing the world"™s energy systems. Their spirit fuels our mission. Our culture is defined by caring, agile, respectful, and accountable individuals. We value excellence of any kind. Sounds like you? We make real what matters. This is your role The position involves working on design and development of mechanical components. Modelling in Creo and creating drawings as per organization"™s guidelines & standards Integrate the whole design in AGILE PLM system as per the organizational regulations Create BOMs of assemblies in AGILE system Coordinate & collaborate with other departments of organization during the process of developing mechanical components. Coordinate with vendors for development of components. Support project teams in arranging for tests on products. We don"™t need superheroes, just super minds. Working experience of about 2 - 5 years in R&D departments of large Electrical / HV switchgear manufacturing organizations is preferred. Bachelor"™s degree in mechanical engineering is a must. Diversity candidate preferred. Technical Skills: Sound Knowledge of Creo / AGILE PLM software is essential Should be able to create 3D models of components & assemblies of complex shapes independently. Should be able to create & manage large assemblies in Creo. Creation of Drawings in Creo and integrating with AGILE system. Sound knowledge of GD&T is essential Working knowledge mechanical design principles with standard components. Make Independent calculations (rigidity, strength, diameters, durability) to dimension parts and components Should have basic knowledge of manufacturing processes, Material & Quality inspection tools Initiate & take part in development & Type tests, Evaluation of type test results Key Skills: MS office / Creo / Agile / ANSYS / other FEA tools Should be good learner Proactive mindset and approach to serve colleagues, internal and external customers Time management and Prioritization Skills We"™ve got quite a lot to offer. How about you? This role is based in Aurangabad, where you"™ll get the chance to work with teams that work on design & developing new products.

Responsibilities of Customer Accounts for Business Development & Commercial Activities. (Preferred customer Hyundai, Kia, Suzuki). Single window contact with customer and to ensure the highest level of customer satisfaction index. Required Candidate profile Ability to work with prominent OEMs on futuristic programs (New business development) for technology products. Travel meeting customers must be passion. Shall be staying nearby Chakan PCMC.

NPD Engineer for a automobile Sheetmetal manufacturar for Sheet Metal & Weldshop Industry Qualification- any Graduate Exp- min 4 yrs Salary- 35 K Location- Faridabad- sec-24 Wtsapp me resume 8295842337- Mr. Bansal

Apply now » .buttontext88d8dcea45dcd44d a{ border1px solid transparent; } .buttontext88d8dcea45dcd44d a:focus{ border1px dashed #5B94FF !important; outlinenone !important; } PRODUCT ENGINEER II At TE, you will unleash your potential working with people from diverse backgrounds and industries to create a safer, sustainable and more connected world. Job Overview The Engineering Data Steward will support the Engineering Excellence and Product Development teams by managing and optimizing processes related to Product Lifecycle Management (PLM) using tools like Windchill PDMLink and Creo CAD. This role involves overseeing CAD data management, engineering change control, and the engineering bill of materials (EBOM). The data steward will also drive continuous improvement efforts, perform data analysis to support decision-making, prepare training documentation, and assist in developing and maintaining SharePoint platforms for internal teams. Required Skills Bachelor’s degree in Engineering, Information Systems, or related field. Experience in PLM systems, particularly Windchill PDMLink, and CAD management. Familiarity with engineering change management and EBOM processes. Proficiency in data analysis tools and methodologies preferably PowerBI. Strong problem-solving skills and attention to detail. Experience in developing training materials and conducting training sessions. Proficiency in Microsoft SharePoint development and customization. Excellent communication and collaboration skills Responsibilities Key Responsibilities: PDMLink and PLM System Management: o Manage and administer Windchill PDMLink for CAD data management and product lifecycle activities. o Ensure data integrity within the PLM system, monitor workflows, and troubleshoot issues. o Support system upgrades, enhancements, and integrations to improve PLM system efficiency. CAD Data Management: o Oversee the management and storage of CAD files, ensuring compliance with company standards. o Coordinate with design teams to ensure proper CAD data control, versioning, and accessibility. Engineering Change Management: o Facilitate engineering change processes, ensuring that all changes are properly documented and tracked in the PLM system. o Collaborate with cross-functional teams to ensure smooth implementation of changes and updates to product designs. Engineering Bill of Materials (EBOM) Management: o Develop and maintain accurate EBOMs in alignment with product designs and manufacturing requirements. o Ensure that EBOMs are regularly updated and correctly reflected in the PLM system. Continuous Improvement Initiatives: o Identify and implement opportunities for process improvements in PLM, CAD management, and change management workflows. o Work with cross-functional teams to develop and execute continuous improvement projects. Training and Documentation: o Develop and maintain training materials for internal teams, covering PLM system usage, CAD management processes, and engineering change workflows. o Provide training to new users and ongoing support to existing users to ensure best practices. SharePoint Development and Management: o Assist in developing and maintaining SharePoint sites for engineering teams, ensuring collaboration and information sharing across teams. o Customize SharePoint to support document management, workflow automation, and project tracking. Competencies ValuesIntegrity, Accountability, Inclusion, Innovation, Teamwork .videocomponent8ae3a91ad732ccb9 a{ border1px solid transparent; } .videocomponent8ae3a91ad732ccb9 a:focus{ border1px dashed #5B94FF !important; outlinenone !important; } .buttontext13c01d781def3077 a{ border1px solid transparent; } .buttontext13c01d781def3077 a:focus{ border1px dashed #5B94FF !important; outlinenone !important; } Location: Bangalore, KA, IN, 560066 #job-location.job-location-inline {displayinline;} City: Bangalore State: KA Country/Region: IN Travel: Less than 10% Requisition ID: 131917 Alternative Locations: Function: Engineering & Technology Job Segment PLM, Developer, Sharepoint, Drafting, CAD, Management, Technology, Engineering Apply now »

Role & responsibilities 1) Execution of 2D Drawing creation / alteration for heavy machinery components using Siemens NX 10 and PLM Teamcenter. 2) Execution of stage-wise drawing preparation for machine / system / sub-system / part level. 3) Execution of Engineering change orders as per the revision note. 4) Delivering quality output of 100% as per the customer standard requirement. 5) Ensure delivering qualitative support in execution of drawings on time as per estimation. 6) Identify & define bill of materials (BOM) for the product developed as, (Unique/Standard/Bought out/In-house). 7) Execute engineering design changes following change management processes. 8) Ensure that design activities are coordinated as per the project needs. Must Have Experience: 1) Good knowledge in Siemens NX 10, 3D Modelling and 2D Drafting creation. 2) Knowledge in Engineering drawings and GD&T Work Experience Preferred: 1) Hands on experience in Product sustenance / development activities. 2) Knowledge on Engineering change management