8 Dcdc Converter Jobs

The ideal candidate should possess experience in Analog and Mixed Signal Design, focusing on PMIC blocks such as DC-DC converter (BUCK, BOOST), LDOs, and clocking circuits. A strong foundation in CMOS design and active filter design is essential for this role. Responsibilities will include circuit design, validation, mixed signal validation, and reliability validation. Exposure to PMIC designs, high-speed digital circuit design, and analysis with timing and flow closure is required. Additionally, knowledge of digitally assisted analog circuits and techniques is preferred. The candidate will be entrusted with developing high-speed, low-power, and reliable analog and digital circuits for various PLL areas. Proficiency in control systems, Bandgap reference, bias, op-amps, feedback, and compensation techniques is necessary. Joining an expanding analog/mixed-signal circuit design team involved in cutting-edge foundry process development nodes, the selected candidate will be expected to focus on Analog blocks and clocking circuits. Proficiency in CMOS design, passive RC circuits, and switched-cap circuits is crucial for success in this role. Task responsibilities will encompass circuit design, validation, mixed signal validation, and reliability validation. Additionally, the candidate should be adept in high-speed digital circuit design and analysis with timing and flow closure, as well as digitally assisted analog circuit and techniques. The role will involve the development of high-speed, low-power, and reliable analog and digital circuits for various PLL areas, requiring a good understanding of control systems, band gaps, bias, op-amps, LDOs, feedback, compensation techniques, as well as experience in LC VCO/DCO design. Exposure to VCO performance parameters and complete PLL architecture is highly desirable.,

You will be responsible for the layout of Analog and mixed-signal modules in CMOS and Power Technologies, with a specific focus on DC-DC converters for power management ICs. This includes designing Analog and mixed-signal system resource blocks such as POR, Bandgap, LDO, Oscillator, amplifier, and power FET. You will also be involved in chip floor-planning, pad ring layout, power busing, bonding, and tape-out activities. Your role will require a deep understanding of layout verification processes like DRC, LVS, Latch-up, and Electro-migration. Additionally, you will collaborate closely with designers to define block layout requirements, match patterns, and ensure signal integrity. To qualify for this position, you should hold a Diploma, Bachelor's, or Master's Degree in Electrical/Electronic Engineering, Physics, or a related field with 7 to 10 years of relevant experience. Your expertise should include Analog and mixed-signal layout, especially in CMOS and Power Technologies. Strong analytical skills and a comprehensive understanding of Analog Layout are essential for this role. Familiarity with power switch layout, electro-migration, and thermal analysis would be advantageous. Proficiency in computer-aided design tools and methodologies is also required to excel in this position.,

Manager / Senior Manager Embedded Hardware Design Engineer About Lauritz Knudsen Electrical and Automation Lauritz Knudsen Electrical and Automation (A unit of Schneider Electric India Pvt. Ltd.) is a pioneering electrical and automation brand with a rich legacy of over 70 years in India. We offer comprehensive portfolio of low-voltage switchgear, medium-voltage switchgear, automation solutions, software, and services catering to diverse segments, including homes, agriculture, buildings, infrastructure, and industry. Work Location: Mahape, Navi Mumbai Education Qualification: BE (Electronics/ Electronics-communication/industrial) Experience: 5-10 years Key Responsibilities/Deliver: 1. Design and development of Electronics Hardware, & its testing 2. Power supply design SMPS topologies, DC-DC converters, High frequency transformer design. 3. Analog & Digital circuit design, its signal integrity Simulation in Pspice, LTSpice, ModelSI IGBT/MOSFET Gate Drivers design, PWM techniques, Snubber design 4. EMI-EMC Filter Design implementation in electronics circuit design, with compliance of Surge, EFT, ESD, CE,CS RE,RS etc. 5. Heatsink calculations, Components selections like Capacitors, LDOs, Inductors, X,Y Capacitors 6. Knowhow of various IEC, CE, UL, standards 7. PCB layout understanding, review. 8. Knowledge of various communication protocols like RTU, USB, CAN, TCP, Profibus, etc. from hardware design perspective. 9. Knowledge of various reliability testing like, HALT, ALT etc. Functional Competencies: 1. Embedded Hardware Design 2. EMI/EMC standard understanding 3. Simulation skills Desired Overall Skills: 1. Effective communication 2. Team player – Individual contributor 3. Creative and open to learn. Schneider Electric aspires to be the most inclusive and caring company in the world, by providing equitable opportunities to everyone, everywhere, and ensuring all employees feel uniquely valued and safe to contribute their best We mirror the diversity of the communities in which we operate and we ‘embrace different’ as one of our core values. We believe our differences make us stronger as a company and as individuals and we are committed to championing inclusivity in everything we do. This extends to our Candidates and is embedded in our Hiring Practices. You can find out more about our commitment to Diversity, Equity and Inclusion here and our DEI Policy here Schneider Electric is an Equal Opportunity Employer. It is our policy to provide equal employment and advancement opportunities in the areas of recruiting, hiring, training, transferring, and promoting all qualified individuals regardless of race, religion, color, gender, disability, national origin, ancestry, age, military status, sexual orientation, marital status, or any other legally protected characteristic or conduct.

Physical Design Engineer and Physican Design Lead positions for 3-5 years, 5-8 Years and 8-15 years of experience levels with hands on experience on technology nodes of 14nm, 28nm, 90nm, 180nm Must have Experience in Floorplanning, Power Grid Design, Placement, CTS, Routing, STA , Power Integrity Analysis, Physical Verification, Chip finishing. Should have experience on Physical Design Methodologies and sub-micron technology nodes of 14nm, 28nm, 90nm, 180nm Should have experience in Analog and Mixed Signal Design Should have experience on programming in Tcl/Tk/Perl to automate design process and improve efficiency. Must have hands-on experience on PnR Suite Strong experience on Static Timing Analysis (PrimeTime - SI) , EM/IR-Drop analysis (PT-PX, Redhawk), Physical Verification Understanding the practical application of methodologies and Physical Design Tools, Flow Automation, and Improvements Experience in complex SOC integration, Low Power and High-Speed Design and Advanced Physical Verification Techniques. Primary Location : Hyderabad ( candidates from across locations) Secondary : Bangalore (Only bangalore based candidates) Joining Time - 0-30 days (with Notice buyout options for higher notice period candidates)

Job Title: AMS Layout Design Engineer Job Description 90/130/150nm and higher node with PMIC layout experience. Performs layout and takes corrective actions in such a way that the final result meets all requirements as stated in the Design document, section layout, including all remarks from review, the customer and back annotation. Performs layout in such a way that the final result meets all general layout guidelines and matches 1-to-1 with parameter devices and hierarchy used in simulations. Create floorplan Performs DRC and takes corrective actions if needed until DRC is error free Performs LVS and takes corrective actions if needed until result is successful Performs layout in such a way that final result meets the foundry layout rules. Provides extracted netlist for back annotation to DE as specified in the Design document, section layout. Translates sub block schematics to sub block layouts, taking care of the same hierarchical build-up and respecting the guidelines of the Block review document, section layout. Adds extra useful information to the Block review document, section layout.

Role & responsibilities PCB Layout Design for Power Electronics: Design multi-layer PCBs for high-power motor controllers, DC-DC converters, inverters, and battery management systems (BMS). Optimize power planes, creepage & clearance distances, and thermal dissipation for high-voltage (>96V) and high-current applications. Ensure low-inductance routing, controlled impedance, and effective grounding strategies for high-power circuits. Select appropriate PCB materials (FR4, Rogers, Polyimide, etc.) for high-reliability applications. Implement EMI/EMC best practices, including shielding, filtering, and differential pair routing. PCB Layout for RF & High-Speed Designs: Design PCBs for RF modules, antennas, and high-speed signal transmission (GHz range). Implement micro strip, strip line, coplanar wave guides, and controlled impedance routing. Optimize layouts for minimum crosstalk, reflection, and insertion loss. Work closely with RF engineers for layout optimization, grounding, and signal integrity enhancements. Conduct EMI simulations and compliance testing to meet RF regulatory standards. PCB Layout for Analog & Mixed-Signal Circuits: Design low-noise, precision analog circuit layouts, including op-amps, ADCs, DACs, and sensor interfaces. Implement star-grounding, guard rings, and Kelvin sensing techniques for ultra-low- noise performance. Optimize high-precision data acquisition and mixed-signal PCB layouts. Ensure minimized parasitic capacitance and inductance in sensitive analog circuits. Thermal & Mechanical Considerations: Design thermal vias, heat sinks, copper pours, and metal core PCBs (MCPCB) for high-power applications. Work closely with mechanical engineers to optimize PCB integration within enclosures and cooling solutions. Work closely with CFTs to perform thermal simulations and power dissipation analysis for PCB heat management. Design Validation & Compliance: Perform DFM (Design for Manufacturability), DFA (Design for Assembly), and DFT (Design for Testability) analysis. Collaborate with fabrication and assembly vendors to ensure high-yield production. Ensure compliance with IPC standards (IPC-2221, IPC-600, IPC-6012), EMI/EMC regulations, and automotive/industrial safety norms. Preferred candidate profile Specific expertise required for functional domain: PCB layout tools: Altium Designer, Cadence Allegro, Mentor Xpedition, KiCad, Eagle, or OrCAD. Power electronics PCB design: High-voltage (>96V), high-current layouts, creepage/clearance design. RF PCB layout: Controlled impedance, high-frequency design, shielding, and SI/PI analysis. Analog circuit PCB layout: Low-noise routing, precision signal integrity, and EMI/EMC mitigation. DFM/DFA considerations: PCB stack-up design, material selection, thermal & mechanical integration. Simulation tools: Ansys SIwave, HyperLynx, LTspice, CST Studio, Keysight ADS for RF/mixed-signal analysis. Knowledge of PCB fabrication & assembly: HDI, flex-PCB, rigid-flex, metal core PCBs (MCPCB).

Job Overview: The RF Service Engineer is responsible for maintaining, repairing, and servicing RF jamming equipment. This includes troubleshooting issues, conducting tests, ensuring proper functionality, and providing post-sales support to clients. The role involves regular interaction with customers, offering technical solutions, preventative maintenance, and ensuring optimal equipment performance. Key Responsibilities: RF Component Testing: Use advanced testing instruments such as Network analysers, Signal Generators, Spectrum Analysers, and Noise Figure Meters to test individual RF components and full systems. System Testing & Optimization: Conduct comprehensive testing and tuning of RF modules to ensure they meet performance standards and customer requirements. Environmental & EMI/EMC Compliance Testing: Perform EMI/EMC tests to assess the environmental compatibility of RF equipment and ensure compliance with relevant regulations and customer specifications. Documentation & Reporting: Maintain detailed documentation of all test results, repairs, maintenance, and customer interactions. Update and create user manuals, maintenance, schedules, and technical reports. Preventative Maintenance: Develop and implement proactive maintenance strategies to reduce downtime and enhance the lifespan of RF equipment. Customer Support & Troubleshooting: Serve as a point of contact for customers, providing expert troubleshooting and solutions to technical issues. Ensure timely resolution of service requests and provide clear instructions to customers. Installation & Setup Assistance: Assist in the installation and configuration of RF equipment at client locations, ensuring proper setup and optimal performance. Quality Assurance & Safety Compliance: Perform regular quality assurance checks and ensure all installations and service procedures meet safety standards and operational excellence. Inventory Management & Procurement: Monitor inventory levels of essential parts and equipment, and coordinate reordering to ensure service continuity. Key Attributes: • A valid driving license and ownership of a two-wheeler are mandatory for attending within-city calls. • Customer-focused with a passion for delivering effective solutions and high levels of service. • Strong technical knowledge in RF systems, especially jamming technologies and related electronic components. • Skilled in managing client relationships, troubleshooting issues, and providing actionable insights for product optimization. • Proactive, organized, and able to handle multiple service requests while ensuring a high level of service quality.

As a Power Electronics Engineer, you will be responsible for designing, developing, and testing power electronic systems and components used in railway applications. You will work closely with cross-functional teams to deliver innovative solutions that meet the demanding requirements of the railway industry. Your role will involve both theoretical analysis and practical implementation, with a focus on reliability, efficiency, and safety. Key Responsibilities: Design and simulate circuits & topologies using design tools such as MATLAB, PSPICE, and ANSYS. Essential to have hands on experience in three phase circuit topologies e.g. Inverters, rectifiers and power supply circuits, DC-DC Converters e.g. buck, fly back. Select & Carry out device characterization of power modules (Si IGBT/MOSFET/SiC/Diode). Estimate power losses and predict thermal stress for various semiconductors using internal design tools or multi-physics simulation tools. Design magnetic (Transformers, Inductors) for various power converter topologies using tools like MATHCAD & PSPICE and realize design samples through vendor interactions. Design, simulate & realize analog/digital circuit (Operational amplifiers, logic gates etc.) perform various types of analyses and select appropriate components considering thermal & safety aspects. Guide team on carrying out EMC Tests as per relevant standards, debug and resolve EMI/EMC issues. Support design verification & product validation test activities as per applicable IEC/UL Standards. Review & provide guidance to the younger team members in design, prototyping, realizing and testing of the product. Work with a multi-disciplinary development team comprising of mechanical, embedded electronics, supply chain and product owners to deliver products. Lead activities like DFMEA and adhere Danfoss processes for product development. Work closely with supply chain to create test instruction for PCBAs & Units for production process control. Work with manufacturing & global suppliers to test & qualify components and assemblies during prototype development and resolve issues as needed. Qualifications: Bachelors or Masters degree in Electrical Engineering, Power Electronics, or a related field. Minimum of 10 years of experience in power electronics design and development, preferably in the railway or transportation sector. Hands-on experience with power converters, inverters, and motor drives. Skills: Proficiency in simulation tools (e.g., MATLAB/Simulink, PSpice, MATHCAD). Strong understanding of electromagnetic compatibility (EMC) and thermal management. Knowledge of railway standards and regulations is a plus. Excellent problem-solving skills and attention to detail. Strong communication skills and ability to work effectively in a team environment.