16 Engineering Calculations Jobs

Performing basic architectural/engineering calculations. Preparing specifications, reports and related data tables. Maintaining liaison with design and drafting groups. Preparing, reviewing, and approving drawings as required. May coordinate technical and administrative activities with employees in other disciplines and other departments participating on an assigned project. Qualifications Bachelor of Architecture with 5 + years of experience in Interior Architecture Proficiency in Autodesk Revit and interiors

To complete the assignment within budgeted manhours / cost with margin. Ensure that the design and drawings are prepared in accordance with the contract drawings, specifications and other contract documents. Co-ordinate the Mechanical services with the building layouts and other services. Ensure that the drawings are prepared within the productivity norms. Key Responsibilites - Ensure the accuracy and technical correctness of the design and co-ordination of the working drawings produced. Prepare the working drawings in accordance with the project and company standards and specifications. Co-ordinate the Air Conditioning drawings with the civil and architectural layouts. Co-ordinate the Air Conditioning services with the electrical, plumbing and fire fighting services, including preparation multiservice details. Resolution of technical difficulties with the site team / main contractor as directed by the Project Manager. Proactive coordination with civil contractor / subcontractors for effective execution of works ensure that the quality of the work is in full compliance to the contract specification, project quality plan and is completed of time. Obtain drawing approval from the professional team. Maintaining ISO documentation, Record Keeping, Suppliers/Manufacturers Data Bank records. Delegating Draftsmen for quantity take offs, cross checking quantities. Issue the approved drawings to site. Maintain the working drawing register (Drawing Log) for the air conditioning drawings. Monitoring productivity and compiling relevant information on production rates. Participate in preparation and implement quality assurance plans. Preparation of record drawings. Identification of additional works and advice the Project Manager to enable formal instructions to be obtained. Key Skills - Detailed engineering knowledge in the design and engineering of Air Conditioning systems for commercial and light industrial buildings in the GCC. The services would include both ductwork and pipe work for the following Systems: o Water and air-cooled chiller plant. o Constant volume air handling plant. o Variable air volume air handling systems o Fan coil systems o Package and split systems o Supply and extract ventilation. o Smoke control systems. Understanding of the method of construction of buildings. Ability to communicate fluently in English - both orally and in writing Developed computer skills, particularly in spreadsheets and databases. Detailed design ability to undertake ductwork and pipe work sizing, pump pressure and fan pressure calculations etc. Detailed knowledge of International, Dubai and Abu Dhabi codes of practice, regulations, and specifications for the construction industry with particular knowledge of the Municipal and Civil Defence requirements. Familiar with Plumbing / Fire Fighting as well as Electrical & ELV systems. Ability to read, understand, visualise and interpret drawings and specifications. Identify training needs of the project team members reporting him and arrange for suitable training for them, in consultation with P.M for furtherance of their professional skills and competence An active personality, able to interact freely with his peers Detailed knowledge in the design and engineering of Plumbing / Fire Fighting systems for commercial and light industrial buildings in the GCC. The services would include both ductwork and pipe work for Systems. Educations - Graduate in Mechanical engineering (B.E. / B.Tech) / Diploma in Mech engineering along with: Approved training in HVAC & related field Proficient in use of engineering calculations such as HAP Knowledge of BIM softwares such as Revit & Navisworks would be an advantage. Experience - 5 years engineering experience with at least 2 years for a Graduate Engineer OR 10 years engineering experience with at least 4 years for Diploma Engineer in the preparation of air-conditioning construction drawings. Minimum 2 years of experience in Site experience in installation / execution (Preferably in GCC countries) Knowledge of Electrical & Plumbing / Fire Fighting systems would be an advantage Hands on experience in Revit / Navisworks would be an advantage Ensure that the design and drawings are prepared in accordance with the contract drawings, specifications and other contract documents within budgeted manhours / cost with margin. Knowledge of BIM softwares (Revit & Navisworks) as added advantage.

To complete the assignment within budgeted manhours / cost with margin. Ensure that the design and drawings are prepared in accordance with the contract drawings, specifications and other contract documents. Co-ordinate the Mechanical services with the building layouts and other services. Ensure that the drawings are prepared within the productivity norms. Key Responsibilites - Ensure the accuracy and technical correctness of the design and co-ordination of the working drawings produced. Prepare the working drawings in accordance with the project and company standards and specifications. Co-ordinate the Air Conditioning drawings with the civil and architectural layouts. Co-ordinate the Air Conditioning services with the electrical, plumbing and fire fighting services, including preparation multiservice details. Resolution of technical difficulties with the site team / main contractor as directed by the Project Manager. Proactive coordination with civil contractor / subcontractors for effective execution of works ensure that the quality of the work is in full compliance to the contract specification, project quality plan and is completed of time. Obtain drawing approval from the professional team. Maintaining ISO documentation, Record Keeping, Suppliers/Manufacturers Data Bank records. Delegating Draftsmen for quantity take offs, cross checking quantities. Issue the approved drawings to site. Maintain the working drawing register (Drawing Log) for the air conditioning drawings. Monitoring productivity and compiling relevant information on production rates. Participate in preparation and implement quality assurance plans. Preparation of record drawings. Identification of additional works and advice the Project Manager to enable formal instructions to be obtained. Key Skills - Detailed engineering knowledge in the design and engineering of Air Conditioning systems for commercial and light industrial buildings in the GCC. The services would include both ductwork and pipe work for the following Systems: o Water and air-cooled chiller plant. o Constant volume air handling plant. o Variable air volume air handling systems o Fan coil systems o Package and split systems o Supply and extract ventilation. o Smoke control systems. Understanding of the method of construction of buildings. Ability to communicate fluently in English - both orally and in writing Developed computer skills, particularly in spreadsheets and databases. Detailed design ability to undertake ductwork and pipe work sizing, pump pressure and fan pressure calculations etc. Detailed knowledge of International, Dubai and Abu Dhabi codes of practice, regulations, and specifications for the construction industry with particular knowledge of the Municipal and Civil Defence requirements. Familiar with Plumbing / Fire Fighting as well as Electrical & ELV systems. Ability to read, understand, visualise and interpret drawings and specifications. Identify training needs of the project team members reporting him and arrange for suitable training for them, in consultation with P.M for furtherance of their professional skills and competence An active personality, able to interact freely with his peers Educations - Graduate in Mechanical engineering (B.E. / B.Tech) / Diploma in Mech engineering along with: Approved training in HVAC & related field Proficient in use of engineering calculations such as HAP Knowledge of BIM softwares such as Revit & Navisworks would be an advantage. Experience - 5 years engineering experience with at least 2 years for a Graduate Engineer OR 10 years engineering experience with at least 4 years for Diploma Engineer in the preparation of air-conditioning construction drawings. Minimum 2 years of experience in Site experience in installation / execution (Preferably in GCC countries) Knowledge of Electrical & Plumbing / Fire Fighting systems would be an advantage Hands on experience in Revit / Navisworks would be an advantage Ensure that the design and drawings are prepared in accordance with the contract drawings, specifications and other contract documents within budgeted manhours / cost with margin. Knowledge of BIM softwares (Revit & Navisworks) as added advantage.Detailed knowledge of design and engineering of Medium, Low and Extra Low Electrical services for major High Rise Residential & commercial buildings.

To complete the assignment within budgeted manhours / cost with margin. Ensure that the design and drawings are prepared in accordance with the contract drawings, specifications and other contract documents. Co-ordinate the Mechanical services with the building layouts and other services. Ensure that the drawings are prepared within the productivity norms. Key Responsibilites - Ensure the accuracy and technical correctness of the design and co-ordination of the working drawings produced. Prepare the working drawings in accordance with the project and company standards and specifications. Co-ordinate the Air Conditioning drawings with the civil and architectural layouts. Co-ordinate the Air Conditioning services with the electrical, plumbing and fire fighting services, including preparation multiservice details. Resolution of technical difficulties with the site team / main contractor as directed by the Project Manager. Proactive coordination with civil contractor / subcontractors for effective execution of works ensure that the quality of the work is in full compliance to the contract specification, project quality plan and is completed of time. Obtain drawing approval from the professional team. Maintaining ISO documentation, Record Keeping, Suppliers/Manufacturers Data Bank records. Delegating Draftsmen for quantity take offs, cross checking quantities. Issue the approved drawings to site. Maintain the working drawing register (Drawing Log) for the air conditioning drawings. Monitoring productivity and compiling relevant information on production rates. Participate in preparation and implement quality assurance plans. Preparation of record drawings. Identification of additional works and advice the Project Manager to enable formal instructions to be obtained. Key Skills - Detailed engineering knowledge in the design and engineering of Air Conditioning systems for commercial and light industrial buildings in the GCC. The services would include both ductwork and pipe work for the following Systems: o Water and air-cooled chiller plant. o Constant volume air handling plant. o Variable air volume air handling systems o Fan coil systems o Package and split systems o Supply and extract ventilation. o Smoke control systems. Understanding of the method of construction of buildings. Ability to communicate fluently in English - both orally and in writing Developed computer skills, particularly in spreadsheets and databases. Detailed design ability to undertake ductwork and pipe work sizing, pump pressure and fan pressure calculations etc. Detailed knowledge of International, Dubai and Abu Dhabi codes of practice, regulations, and specifications for the construction industry with particular knowledge of the Municipal and Civil Defence requirements. Familiar with Plumbing / Fire Fighting as well as Electrical & ELV systems. Ability to read, understand, visualise and interpret drawings and specifications. Identify training needs of the project team members reporting him and arrange for suitable training for them, in consultation with P.M for furtherance of their professional skills and competence An active personality, able to interact freely with his peers Educations - Graduate in Mechanical engineering (B.E. / B.Tech) / Diploma in Mech engineering along with: Approved training in HVAC & related field Proficient in use of engineering calculations such as HAP Knowledge of BIM softwares such as Revit & Navisworks would be an advantage. Experience - 5 years engineering experience with at least 2 years for a Graduate Engineer OR 10 years engineering experience with at least 4 years for Diploma Engineer in the preparation of air-conditioning construction drawings. Minimum 2 years of experience in Site experience in installation / execution (Preferably in GCC countries) Knowledge of Electrical & Plumbing / Fire Fighting systems would be an advantage Hands on experience in Revit / Navisworks would be an advantage Ensure that the design and drawings are prepared in accordance with the contract drawings, specifications and other contract documents within budgeted manhours / cost with margin. Knowledge of BIM softwares (Revit & Navisworks) as added advantage. Detailed knowledge of design and engineering of Medium, Low and Extra Low Electrical services for major High Rise Residential & commercial buildings.

Responsibilities: * Collaborate with cross-functional teams on project deliverables. * Conduct engineering calculations using AutoCAD software. * Ensure compliance with industry standards and client requirements.

Key Responsibilites - Ensure the accuracy and technical correctness of the design and co-ordination of the working drawings produced. Prepare the working drawings in accordance with the project and company standards and specifications. Co-ordinate the Air Conditioning drawings with the civil and architectural layouts. Co-ordinate the Air Conditioning services with the electrical, plumbing and fire fighting services, including preparation multiservice details. Resolution of technical difficulties with the site team / main contractor as directed by the Project Manager. Proactive coordination with civil contractor / subcontractors for effective execution of works ensure that the quality of the work is in full compliance to the contract specification, project quality plan and is completed of time. Obtain drawing approval from the professional team. Maintaining ISO documentation, Record Keeping, Suppliers/Manufacturers Data Bank records. Delegating Draftsmen for quantity take offs, cross checking quantities. Issue the approved drawings to site. Maintain the working drawing register (Drawing Log) for the air conditioning drawings. Monitoring productivity and compiling relevant information on production rates. Participate in preparation and implement quality assurance plans. Preparation of record drawings. Identification of additional works and advice the Project Manager to enable formal instructions to be obtained. Key Skills - Detailed engineering knowledge in the design and engineering of Air Conditioning systems for commercial and light industrial buildings in the GCC. The services would include both ductwork and pipe work for the following Systems: o Water and air-cooled chiller plant. o Constant volume air handling plant. o Variable air volume air handling systems o Fan coil systems o Package and split systems o Supply and extract ventilation. o Smoke control systems. Understanding of the method of construction of buildings. Ability to communicate fluently in English - both orally and in writing Developed computer skills, particularly in spreadsheets and databases. Detailed design ability to undertake ductwork and pipe work sizing, pump pressure and fan pressure calculations etc. Detailed knowledge of International, Dubai and Abu Dhabi codes of practice, regulations, and specifications for the construction industry with particular knowledge of the Municipal and Civil Defence requirements. Familiar with Plumbing / Fire Fighting as well as Electrical & ELV systems. Ability to read, understand, visualise and interpret drawings and specifications. Identify training needs of the project team members reporting him and arrange for suitable training for them, in consultation with P.M for furtherance of their professional skills and competence An active personality, able to interact freely with his peers Educations - Graduate in Mechanical engineering (B.E. / B.Tech) / Diploma in Mech engineering along with: Approved training in HVAC & related field Proficient in use of engineering calculations such as HAP Knowledge of BIM softwares such as Revit & Navisworks would be an advantage. Experience - 5 years engineering experience with at least 2 years for a Graduate Engineer OR 10 years engineering experience with at least 4 years for Diploma Engineer in the preparation of air-conditioning construction drawings. Minimum 2 years of experience in Site experience in installation / execution (Preferably in GCC countries) Knowledge of Electrical & Plumbing / Fire Fighting systems would be an advantage Hands on experience in Revit / Navisworks would be an advantage

Performs specific and moderate portions of a broader assignment of an experienced engineer. Gathers and correlates basic engineering data using established and well-defined procedures. Works on detailed or routine engineering assignments involving calculations and relatively simple tests. Proposes approach to solve new problems encountered using modifications of standard procedures or methods developed in previous assignements. Identifies discrepancies in results. Provides guidance to entry level engineers. Performs work in accordance with agreed upon budget and schedule with little supervision. Independently performs all the tasks necessary to complete primary design elements for engineering works. Performance at this level requires developmental experience in a professional position. must have Network Rail experience of at least 3 years. He must be holding IRSE Licence 1.1.510 Qualifications Master of Engineering degree (or equivalent education) in an appropriate engineering discipline from an accredited college or university. 6+ Years experience Should have work experience in UK Network Rail main line Signalling with IRSE license of category 1.1.510 Must have IRSE UK license of category 1.1.510

Job Description - Design & Development Engineer Job location: Tambaram, Chennai. About the Company: Gideon Automotive Industries is an auto ancillary unit established in the year 2013. We manufacture Electrical, Electro-Mechanical and electronic components such as solenoid valves, switches, solenoid coil assemblies, and sensors. The majority of the products are proprietary in nature. Gideon follows the latest manufacturing practices, implements IATF 16949 QMS and managed by professionals. Gideon is supplying products to reputed Tier-1 customers and OEM in automobile and non-auto industries in India and oversees. Gideon is growing at a CAGR of 35% since inception and positioned to grow much faster in the coming years. We offer a satisfactory working environment and believe in treating employees as its important asset. Roles & Responsibilities: Responsible for preparing drawing using Solid Works Design Software & Auto CAD. Knowledge of designing / detailing assemblies and sub - assemblies of Products. Knowledge in preparation of layouts, assembly drawings, detailed manufacturing drawings with necessary GD & T, preparation of Bill of material, maintenance of ECN, Drawing Revisions and Change level maintenance. Create and update database of design records for future reference purposes. Perform other design, new product Development activities as required. Knowledge in New Product Development using Customer input and developing products through Reverse Engineering concepts, product life cycle testing, design development activities. Studying existing Products, processes and implementing improvements. Maintenance of design and new product development documents as per IATF 16949 QMS is must. Technical co-ordination with other functional departments like production, purchase, and marketing Participating in CFT meetings, maintaining committed timelines and project files Basic Requirements: Excellent written and verbal communication skills Good proficiency & hands on experience in using MS Office applications. Ability to act and operate independently with minimal daily directions from manager to accomplish the tasks. Share and collaborate effectively with others, create a positive team spirit Desired Candidate Profile: BE Mechanical Engineering / Diploma in Mechanical Engineering qualifications with minimum 6+ years of experience in Automotive industry is preferred. Must have good knowledge in Solid Works & Auto CAD software. Knowledge in PPAP, APQP, DFMEA is preferred. Sound Understanding in GD&T in Customer Drawings. Candidates working in Electromechanical, Electrical and Electronics based product development area are preferred. More specifically Candidates working in Pneumatic and Automobile Sectors will be preferred. Candidate shall be creative, highly detail oriented and organised. Male Candidates are preferred. Candidates from Chennai (In & around Tambaram location) will be given preference. Candidates from MSME units with strong desire to learn and grow with the organisation are preferred.

Essential duties and responsibilities : Mechanical designer will be reporting to the Senior Team Leader and provide engineering support to Barry-Wehmiller divisions on the below areas: Design of product line variants Design modifications of existing machines Basic engineering calculations Concept Development Detailed Design Detail drawings and Bill of Materials release using SolidWorks (2018 & above)/EPDM and Infor XA applications as per client standards Perform risk assessments of new designs using DFMEA or similar techniques. Acquiring and maintaining knowledge in functional specifications, design intents and latest developments in the industry related to client product lines. Technical skills: Sound knowledge in mechanical engineering design principles. Excellent knowledge in manufacturing processes. Extensive knowledge in engineering calculations. Knowledge of electrical components, sensors, encoders, etc. Experience in handling large assemblies using SolidWorks (2018 & above). Knowledge in the principles of operation of industrial machinery such as Printing, Packaging and Converting Machines, Textile machines, Paper machines and discrete product machineries. Experience in material selection based on functional requirement and application of manufactured and commercial components of industrial machinery and equipment. Extensive knowledge in global material standards and specifications of commonly used materials in industrial machineries and equipment. FEA using SolidWorks simulation (experience in structural and dynamic analysis using ANSYS is an added advantage). Knowledge in Metric and Imperial (Inch) Design Standards. Knowledge in servo motor & gearbox selection and drive calculations. Experience in creating and updating functional specifications of machines Experience technical problem-solving skills and providing out of the box solutions for complex problems. CAD modelling and detailing using SolidWorks is mandatory, experience in Creo and UG is an added advantage. Excellent knowledge in GD&T and tolerance stack-up analysis.

Responsibilities: Assist with engineering store management Prepare electrical drawings & calculations Conduct electrical engineering tasks Collaborate on bom preparation using AutoCAD Support engineering purchases

Who you are & how you can contribute? We are looking for highly skilled Mechanical (freelancers) to contribute to AI training through data annotation and domain-specific expertise This is a remote, flexible opportunity where you can work on cutting-edge AI projects, applying your domain knowledge to refine AIs understanding and performance Key Responsibilities: Analyze and annotate mechanical designs for AI training Provide feedback on AI-generated CAD and mechanical simulations Evaluate engineering calculations and problem-solving techniques Must Required Traits: Strong academic background in Mechanical Engineer (PhD preferred) Teaching, tutoring, or content creation experience in the field is a plus Familiarity with AI, machine learning, or data annotation is beneficial Strong analytical skills and attention to detail Location: Delhi / NCR,Bangalore/Bengaluru,Hyderabad/Secunderabad,Chennai,Pune,Kolkata,Ahmedabad,Mumbai

Sr. Project Engineer/Associate Technical Leader Static Design PV Elite Key Accountabilities: Experience: 8 to 10 Years. Qualifications: B.E/Tech or M.E/MTech Mechanical or Associated Branches. To design, analyse Pressure vessels using software tools like PV Elite or Autopipe Vessel and review design against followed standards of ASME Sec VIII Div1 and Div2, EN (European), PD5500. Heat Exchanger design using TEMA & ASME. To design of Storage Tanks using API650. Carry out technical reviews at various stages of design and liaison with client for approval. To execute project efficiently and maintaining quality. To provide design solution to optimize the vessel design. Prepare and review technical reports, designs, and GA/assembly drawings in AutoCAD. Provide technical advice on safe designs and construction. To guide, train and lead team of engineers. Set goals for team members, monitor progress, and ensure timely delivery of project milestones. Lead, mentor, and manage a team of engineers, fostering a collaborative and productive work environment. Conduct regular team meetings to review progress, resolve challenges, and ensure alignment with project objectives. Oversee the quality of deliverables to ensure they meet client and organizational standards. Provide guidance and technical expertise to team members for resolving complex engineering challenges. Identify skill gaps within the team and arrange training or development opportunities as needed. Act as the primary point of contact for clients and stakeholders, ensuring smooth communication and successful project execution. Requirements Experience and Skills Required: Good skillsets in PV Elite or Autopipe vessel tool. Ability to define scope and approach, interpret results and make recommendations Ability to resolve analysis related issues. Sound understanding of Fabrication processes. Understanding of Material Codes. Understanding of WRC 107/297. Strong mechanical engineering fundamentals (Stress, Heat Transfer) Ability to develop training material and impart trainings. Experience in Vessel Support design and Jacketed vessel design. Good verbal and written communication skills, Good Team Player. Good skills in MS-office tools Ability to create reports and documentation for leadership review. Strong problem-solving skills and the ability to independently analyse and achieve issue resolution using standard engineering techniques & engineering calculations

Job Specification : To undertake all activities related to Project Management of the prototypes, products and projects being undertaken by Defence Department including feasibility studies at the RFP Level Skill Requirement: 1. Be familiar with the technical trends in manufacturing and requirements of the Armed Forces with respect MIL equipment being manufactured. 2. Study and familiarize the project specifications from prototype design, performance standards and MIL- equipment to be developed including its operations, testing and trials requirements 3. Develop understanding of product line and make necessary engineering calculations to support execution to internal and external teams. 4. Provides input for product feature enhancements and process improvements. Ensure yearly target of manufacture are met. 5. Assumes the primary technical relationship with the customer and maintain external key accounts to coordinate all activities with the customer. Coordinate and implement all the engineering duties and external procedures as process owner till product is delivered. 6. Prepare and Control project plan by periodic reviewing, specifications, plans and schedule changes, recommending actions, maintains project schedule by monitoring progress; coordinating activities; resolving problems 7. Interaction with support vendors and suppliers to ensure prototypes/ deliverables are completed as per the project plan and timelines.

About the Role: We are seeking a skilled and detail-oriented Design Engineer to join our growing technical team. The ideal candidate will be responsible for creating and developing designs for engineering systems, components, and products as per client and project specifications. This role requires strong technical proficiency, creativity, and hands-on experience with CAD software and engineering standards. Key Responsibilities: Develop 2D and 3D engineering drawings using AutoCAD, SolidWorks, or equivalent tools Interpret technical specifications, client requirements, and project documentation Collaborate with project and production teams to optimize design functionality and cost-efficiency Perform stress analysis, tolerance studies, and design verifications Revise and improve existing designs based on feedback or project changes Ensure all designs comply with applicable industry codes and standards Prepare documentation, design reports, and Bill of Materials (BoM) Qualifications & Skills: Bachelor's degree in Mechanical Engineering or related field 1- 4 years of relevant experience in design engineering, preferably in mechanical, fabrication, or oil & gas sectors- Proficiency in CAD tools (AutoCAD, SolidWorks, etc.) Knowledge of engineering codes and standards (ASME, BSEN etc.) Excellent analytical and problem-solving skills Strong attention to detail and accuracy Good communication and teamwork abilities Interested candidates are encouraged to send their CVs to careers@acumensafety.com with the subject line Application Design Engineer” .

Generate 3D/2D CAD models and drawing Ensure manufacturing and assembly feasibility Follow standard and best practices Support product development and concept Design calculation Prepare technical docs and manual Collaborate and track project progress Required Candidate profile Strong problem-solving and time management Proactive in tech/process improvements Cross-disciplinary skills 3+ yrs design experience SolidWorks expertise FEA & ISO 9001 exposure preferred

Performs and approves engineering solutions within projects and/or operations within projects, and manufacturing, fabrication & installation sites, in accordance with department, project, manufacturing, fabrication& installation instructions, schedules & processes and HSE requirements: - Technically correct engineering analysis- Optimized engineering solutions - Technical assistance within projects, and manufacturing, fabrication, and installation sites. Approves design basis. Coordinates engineering activities on tenders and project execution. May supervise sub-contractors. Guarantees the compliance of engineering solutions with client requirements, industry standards, and Group HSE, engineering processes, and best practices for the discipline. Provides guidance and training to Engineers under supervision-coordination. Interfaces with other engineering disciplines and engineering team(s).Role & responsibilities Preferred candidate profile BS degree in Engineering preferred or equivalent with 5 to 10 years of experience in the field • Strong technical skills in engineering Strong project management skills Good presentation and coaching skills Advanced organizational and problem-solving skills Understanding customer requirements and ability to translate them into product specifications Excellent command of English