207 Abaqus Jobs

Job Purpose Provides engineering solutions as part of a SSE project taskforce, in accordance with TechnipFMC standards, procedures, processes, schedules, and budget, with a continuous concern for quality, targets, and customer satisfaction. Will be responsible for structural integrity, timeliness and cost effectiveness of all designs under their control and shall ensure that all design and design activities meet the requirements of the project and are fit for purpose. Independently perform structural design and analysis and supervise structural engineers performing design and analysis. Create and review technical engineering documents. Manage project design reviews and constructability reviews. Provide sound engineering advice on subsea structural analysis and design to ensure efficient and cost-effective fabrication, handling and subsea installation. Ensure technical compliance and quality as well as ontimedelivery of all responsible deliverables. Ability to mentor and manage a team of engineers & designers. Attend meetings with project teams and interface with clients and be able to provide engineering recommendations and solutions. Drives innovative solutions to optimize subsea structures and improve efficiency. Demonstrated experience in supporting engineering for subsea projects constrained by safety, quality, delivery, and cost requirements. Travel to and attend site as required to guide, inspect or oversee fabrication of structural items. You are meant for this job if: BS degree in Engineering preferred or equivalent with 3 to 5 years of experience in the field. Sound understanding of Engineering practices, design methods & calculations. Experience in mentoring, leading a team of engineers & delivering projects. Experience in structural steel design preferably in Offshore and Subsea field (Accordance with applicable industry code DNV / ASME / API, etc.) and fatigue analysis. Experience in reviewing engineering designs, documents, layouts, calculations and interpreting FEA/ structural analysis results. Strong knowledge of engineering discipline and physical modeling techniques (solid mechanics, strength of material, fluid dynamics) is required. Strong technical basis in engineering Experience in SACS / other beam element software. Knowledge in Finite element experience on ANSYS / Abaqus software. Ability to work in a team-oriented environment. Strong written and verbal communication skills in English with ability to effectively transfer subject matter expertise. Skills Project Management Presentation Skills Analysis and Problem Solving

At Capgemini Engineering, the world leader in engineering services, we bring together a global team of engineers, scientists, and architects to help the world’s mostinnovative companies unleash their potential. From autonomous cars to life-saving robots, our digital and software technology experts think outside the box as theyprovide unique R&D and engineering services across all industries. Join us for a career full of opportunities. Where you can make a difference. Where no two days arethe same. This role involves the development and application of engineering practice and knowledge in the following technologiesDesign of mechanical systems, devices, equipment and machines; installing and maintaining mechanically functioning equipment; simulating a wide range of interactions and evaluate performance in real world scenarios; and develop prototype for manufacturability, testing and validation. - Grade Specific Focus on Mechanical Physical Engineering. Develops competency in own area of expertise. Shares expertise and provides guidance and support to others. Interprets clients needs. Completes own role independently or with minimum supervision. Identifies problems and relevant issues in straight forward situations and generates solutions. Contributes in teamwork and interacts with customers. Skills (competencies) Active Listening Adaptability Analytical Thinking CAD & Digital Twin DesignGenerative Design & Additive Manufacturing Collaboration Material Science and Recycling Process Material ScienceMetals, Composite, Surface and Nanomaterials Problem Solving Product Digital DesignAutoCAD Product Digital DesignAutodesk Fusion 360 Product Digital DesignCATIA V5 Project Management Project Planning Projects & QCT Management, Supplier Management Rapid DynamicsCrash and Vulnerability Risk Management Scope Management Specification and Management Stakeholder Management Static Stress Analysis Static StressPhysics & Simulation Science Strategic Thinking Sustainability-Electrification Sustainability-Green Hydrogen

Responsibilities: Prepare finite element models of Vehicle Chassis (Brake, Suspension Steering) components and subsystems. Apply basic loading and boundary conditions for structural, thermal and modal analysis of chassis parts especially brakes. Carry CAE Analysis and establishcorrelation of results with actual tests. Result interpretation and detailed analysis report preparation. Efficient execution of CAE activities for model development, Value Enhancement, Quality resolution projects at different product development stages. Participation in problems trouble shooting and after-analysis, proposing countermeasures and support in implementation. Supporting design team to generate evaluate weight cost reduction proposals. Support the team in improvement and generation of CAE methodology. Competency Requirements: (a) Technical/ Functional : Good knowledge of functioning and design of Chassis parts and subsystems especially brakes. Ability to perform virtual validation interpreting physical test conditions. Excellent knowledge of Noise and Vibration, Fatigue Theory of Elasticity. Candidate should have: Good Concept of FEA, Analysis of part level, sub system level and vehicle level Experience in using Pre / Solver / Post tools like Hypermesh, Hyperview, Estech Sequal, ABAQUS Experience in doing NVH analysis using Solver MSC Nastran . Desired: Experience on Brake parts NVH, Structural CAE. Suspension Steering CAE know-how is added advantage. (b) Behavioral: Good analytical ability, Communication presentation skills, Problem solving skills, Achievement oriented, Active Team player, Networking skills.

Role Purpose The purpose of this role is to design, develop and troubleshoot solutions/ designs/ models/ simulations on various softwares as per clients/ project requirements Do 1. Design and Develop solutions as per clients specifications Work on different softwares like CAD, CAE to develop appropriate models as per the project plan/ customer requirements Test the protype and designs produced on the softwares and check all the boundary conditions (impact analysis, stress analysis etc) Produce specifications and determine operational feasibility by integrating software components into a fully functional software system Create a prototype as per the engineering drawings & outline CAD model is prepared Perform failure effect mode analysis (FMEA) for any new requirements received from the client Provide optimized solutions to the client by running simulations in virtual environment Ensure software is updated with latest features to make it cost effective for the client Enhance applications/ solutions by identifying opportunities for improvement, making recommendations and designing and implementing systems Follow industry standard operating procedures for various processes and systems as per the client requirement while modeling a solution on the software 2. Provide customer support and problem solving from time to time Perform defect fixing raised by the client or software integration team while solving the tickets raised Develop software verification plans and quality assurance procedures for the customer Troubleshoot, debug and upgrade existing systems on time & with minimum latency and maximum efficiency Deploy programs and evaluate user feedback for adequate resolution with customer satisfaction Comply with project plans and industry standards 3. Ensure reporting & documentation for the client Ensure weekly, monthly status reports for the clients as per requirements Maintain documents and create a repository of all design changes, recommendations etc Maintain time-sheets for the clients Providing written knowledge transfer/ history of the project Deliver No. Performance Parameter Measure 1. Design and develop solutions Adherence to project plan/ schedule, 100% error free on boarding & implementation, throughput % 2. Quality & CSAT On-Time Delivery, minimum corrections, first time right, no major defects post production, 100% compliance of bi-directional traceability matrix, completion of assigned certifications for skill upgradation 3. MIS & Reporting 100% on time MIS & report generation Mandatory Skills: Delivery(RPA). Experience3-5 Years.

FEA (Finite Element Analysis) _ Bangalore Experience - 4 Years to 8 Years Location - Bangalore Notice period - Immediate to 30 days Job Description : Experience: 4years 7 years Must have 4 + years of experience with CAE . Must have experience with HYPERWORKS or equivalent. Must have experience working with ABAQUS or NASTRAN Must have experience working with LS-Dyna for Crash Analysis Deep understanding of engineering theory and principles of design Oral and written communications skills to work effectively with others. Understanding of probability and statistical analysis High level of analytical ability where problems are unusual or difficult. Demonstrated project leadership skills. Good working knowledge of basic mechanical design principals such as: strength of materials, physics, statics, kinematics, and dynamics with the supporting math skills Knowledge of analysis and verification techniques Strong computer skill and use of basic office software (MS Office, Excel) Knowledge on Multi Body Dynamics (MBD) would be added advantage Knowledge on AI would be added advantag Skills Required : FEA, CAE, Hyperworks, ABAQUS , NATRAN, LS-Dyna If you are interested to the position. Please do share your updated CV to soujanya.c@pisquaretech.com Regards, Soujanya C 9740229465 Pi Square Technology

STRUCTURAL ENGINEER (MECHANICAL) We are seeking a highly skilled and experienced Mechanical Structural Engineer with proficiency in structural design, finite element analysis (FEA), and the evaluation of load-bearing structures. The ideal candidate will hold an M-Tech in Structural Engineering and possess at least 5 years of hands-on experience working in the oil and gas industry. The successful candidate will be responsible for designing, analyzing, and ensuring the integrity of mechanical structures in various projects while ensuring compliance with industry standards and safety regulations. Key Responsibilities: Structural Design & Analysis : Perform design, analysis, and validation of mechanical structural components, including load-bearing structures, using advanced engineering principles. Finite Element Analysis (FEA) : Utilize FEA software (e.g., ANSYS, Abaqus, etc.) to conduct stress, strain, and vibration analysis of mechanical structures, ensuring optimal performance and safety under operational loads. Load Bearing Structures : Design and evaluate load-bearing structures such as platforms, frames, and supports to ensure they meet the required strength, stability, and fatigue resistance in the oil and gas sector. Collaboration with Cross-functional Teams : Work closely with other engineering teams, project managers, and clients to provide technical support and ensure seamless integration of structural designs with other engineering disciplines. Material Selection and Specification : Recommend materials for structural components, considering strength, weight, corrosion resistance, and cost-effectiveness in harsh environments. Code Compliance : Ensure that all structural designs comply with relevant international codes, standards, and regulations (e.g., ASME, API, AISC, etc.). Quality Assurance : Conduct thorough reviews of design calculations, drawings, and models to ensure accuracy, consistency, and compliance with industry best practices. Risk Assessment : Identify potential structural failure modes and proactively mitigate risks through design improvements and alternative solutions. Project Management : Assist in project planning, estimation, and coordination of resources to meet deadlines and deliverables. Mentorship : Provide technical guidance and mentorship to junior engineers and technical staff. Requirements: Educational Qualifications : M-Tech in Structural Engineering or a related field. Experience : Minimum of 5 years of relevant experience in structural engineering, preferably within the oil and gas industry. Technical Skills : Proficiency in structural design and finite element analysis (FEA). Expertise in using FEA software such as ANSYS, Abaqus, or similar tools. In-depth understanding of load-bearing structures and the ability to assess their performance. Familiarity with industry codes and standards (e.g., ASME, API, AISC). Soft Skills : Strong problem-solving abilities and attention to detail. Excellent communication skills, both written and verbal. Ability to work independently as well as part of a team. Certifications (Optional) : Relevant certifications (e.g., Chartered Engineer, PE, etc.) are a plus. Preferred Qualifications: Previous experience with offshore structures or heavy lifting equipment in the oil and gas industry. Knowledge of software tools like AutoCAD, SolidWorks, or similar 3D CAD software. Familiarity with project management software tools. Job Types: Full-time, Permanent Pay: ₹21,549.41 - ₹60,380.64 per month Benefits: Health insurance Paid sick time Ability to commute/relocate: Kozhikode, Kerala: Reliably commute or planning to relocate before starting work (Required) Experience: Structural engineer : 10 years (Required) Oil & gas: 5 years (Required) Work Location: In person

Requisition Number: 69455 The company built on breakthroughs. Join us. Corning is one of the world’s leading innovators in glass, ceramic, and materials science. From the depths of the ocean to the farthest reaches of space, our technologies push the boundaries of what’s possible. How do we do this? With our people. They break through limitations and expectations – not once in a career, but every day. They help move our company, and the world, forward. At Corning, there are endless possibilities for making an impact. You can help connect the unconnected, drive the future of automobiles, transform at-home entertainment, and ensure the delivery of lifesaving medicines. And so much more. Come break through with us. Required Job Profile Corning Research Center India is seeking a technically exceptional and innovative Senior Scientist to join the team in Pune, India. The ideal candidate will apply engineering knowledge, advanced numerical methods, and computational modeling techniques to solve challenging problems related to product performance and manufacturing processes across Corning’s diverse portfolio of materials and technologies. We are looking for a creative, out-of-the-box thinker who can work independently and collaborate effectively with global, multidisciplinary teams to deliver high-impact, innovative, and life-changing solutions. This role requires expertise in solid mechanics, Finite Element Analysis (FEA), and modeling techniques, as well as strong programming skills. Key Responsibilities Develop, validate, and apply numerical models to solve problems related to dynamic impact, nonlinear FEA, fracture mechanics, and applied mechanics. Collaborate with cross-functional teams, including experimentalists, researchers, scientists, and project leaders located globally, to address research and development challenges. Create models using appropriate numerical methods and software and expand modeling capabilities as required. Translate real-world problems into solvable modeling objectives and provide actionable insights. Communicate and present project updates to stakeholders across global locations. Document results and findings via internal reports and external publications. Stay at technological forefront in modeling, simulation, and applied mechanics. Required Skills Strong background in solid mechanics and Finite Element Analysis (FEA) with a deep understanding of solid mechanics concepts and theory. Hands-on experience with commercial FEA software, including (but not limited to) ABAQUS, LS-DYNA, ANSYS Mechanical, MATLAB, and Tecplot. Expertise in modeling dynamic impact problems, material nonlinearities, and fracture mechanics. Proficiency in programming languages such as C/C++, Unix, Shell, and Python. Strong analytical, diagnostic, and problem-solving skills. Ability to break down complex real-world problems into solvable modeling objectives. Versatility in adapting to various technology areas; a balanced combination of technical depth and breadth. Self-motivated with a long-term interest in technical growth. Desired Skills Experience with open-source FEA software frameworks, such as MOOSE or FEniCS, is ana dded advantage Exposure to Artificial Intelligence (AI), Machine Learning (ML), and Data Analytics techniques particularly as applied to modeling, simulation, or materials science. Familiarity with statistical methods, machine learning frameworks (e.g., TensorFlow, PyTorch), or data visualization tools. Experience working in an industrial R&D environment. Knowledge of data-driven modeling, optimization, or predictive analytics. Flexibility to thrive in a dynamic work environment and adapt to changing priorities. Ability to integrate physics-based models with data-driven approaches to enhance predictive capabilities. Soft Skills Highly collaborative and capable of fostering open engagement with colleagues to achieve project goals. Strong technical curiosity with a desire to continually learn and grow in diverse technology areas. Ability to translate complex technical concepts into simplified explanations for broader audiences. Self-driven with a proven ability to manage independent workstreams. Effective communication skills for remote collaboration with global teams via phone and video calls. Education And Experience PhD, Master’s, or Dual Degree in Mechanical Engineering, Civil Engineering or Materials Science with an emphasis on solid mechanics and Finite Element Analysis from IITs, IISc, or reputed foreign universities Candidates with more than 4 years of relevant work experience post-Masters/Dual Degree or more than 2 year of experience post-PhD are welcome to apply. Travel Occasional travel to global locations to collaborate with colleagues in research, development, engineering, and manufacturing teams. Work Flexibility Option to work-from-home up to 2 days per week.

Vin Design Solutions is looking for CAE Analyst (Safety) to join our dynamic team and embark on a rewarding career journey Simulate crash and impact tests for vehicle safety Analyze stress, deformation, and energy absorption Ensure compliance with safety regulations Collaborate with design teams for structural enhancements

Vin Design Solutions is looking for CAE Engineer to join our dynamic team and embark on a rewarding career journey Analyzing customer needs to determine appropriate solutions for complex technical issues Creating technical diagrams, flowcharts, formulas, and other written documentation to support projects Providing guidance to junior engineers on projects within their areas of expertise Conducting research on new technologies and products in order to recommend improvements to current processes Developing designs for new products or systems based on customer specifications Researching existing technologies to determine how they could be applied in new ways to solve problems Reviewing existing products or concepts to ensure compliance with industry standards, regulations, and company policies Preparing proposals for new projects, identifying potential problems, and proposing solutions Estimating costs and scheduling requirements for projects and evaluating results

Vin Design Solutions is looking for CAE Analyst (NVH) to join our dynamic team and embark on a rewarding career journey Analyze noise, vibration, and harshness of products Conduct simulations and recommend design changes Use specialized tools to assess acoustic performance Support product refinement for comfort and safety

STRUCTURAL ENGINEER (MECHANICAL) We are seeking a highly skilled and experienced Mechanical Structural Engineer with proficiency in structural design, finite element analysis (FEA), and the evaluation of load-bearing structures. The ideal candidate will hold an M-Tech in Structural Engineering and possess at least 5 years of hands-on experience working in the oil and gas industry. The successful candidate will be responsible for designing, analyzing, and ensuring the integrity of mechanical structures in various projects while ensuring compliance with industry standards and safety regulations. Key Responsibilities: Structural Design & Analysis : Perform design, analysis, and validation of mechanical structural components, including load-bearing structures, using advanced engineering principles. Finite Element Analysis (FEA) : Utilize FEA software (e.g., ANSYS, Abaqus, etc.) to conduct stress, strain, and vibration analysis of mechanical structures, ensuring optimal performance and safety under operational loads. Load Bearing Structures : Design and evaluate load-bearing structures such as platforms, frames, and supports to ensure they meet the required strength, stability, and fatigue resistance in the oil and gas sector. Collaboration with Cross-functional Teams : Work closely with other engineering teams, project managers, and clients to provide technical support and ensure seamless integration of structural designs with other engineering disciplines. Material Selection and Specification : Recommend materials for structural components, considering strength, weight, corrosion resistance, and cost-effectiveness in harsh environments. Code Compliance : Ensure that all structural designs comply with relevant international codes, standards, and regulations (e.g., ASME, API, AISC, etc.). Quality Assurance : Conduct thorough reviews of design calculations, drawings, and models to ensure accuracy, consistency, and compliance with industry best practices. Risk Assessment : Identify potential structural failure modes and proactively mitigate risks through design improvements and alternative solutions. Project Management : Assist in project planning, estimation, and coordination of resources to meet deadlines and deliverables. Mentorship : Provide technical guidance and mentorship to junior engineers and technical staff. Requirements: Educational Qualifications : M-Tech in Structural Engineering or a related field. Experience : Minimum of 5 years of relevant experience in structural engineering, preferably within the oil and gas industry. Technical Skills : Proficiency in structural design and finite element analysis (FEA). Expertise in using FEA software such as ANSYS, Abaqus, or similar tools. In-depth understanding of load-bearing structures and the ability to assess their performance. Familiarity with industry codes and standards (e.g., ASME, API, AISC). Soft Skills : Strong problem-solving abilities and attention to detail. Excellent communication skills, both written and verbal. Ability to work independently as well as part of a team. Certifications (Optional) : Relevant certifications (e.g., Chartered Engineer, PE, etc.) are a plus. Preferred Qualifications: Previous experience with offshore structures or heavy lifting equipment in the oil and gas industry. Knowledge of software tools like AutoCAD, SolidWorks, or similar 3D CAD software. Familiarity with project management software tools. Job Types: Full-time, Permanent Pay: ₹21,549.41 - ₹60,380.64 per month Benefits: Health insurance Paid sick time Ability to commute/relocate: Kozhikode, Kerala: Reliably commute or planning to relocate before starting work (Required) Experience: Structural engineer : 10 years (Required) Oil & gas: 5 years (Required) Work Location: In person

Location: Hyderabad, IN Employment type: Employee Place of work: Office Offshore/Onshore: Onshore TechnipFMC is committed to driving real change in the energy industry. Our ambition is to build a sustainable future through relentless innovation and global collaboration – and we want you to be part of it. You’ll be joining a culture that values curiosity, expertise, and ideas as well as diversity, inclusion, and authenticity. Bring your unique energy to our team of more than 20,000 people worldwide, and discover a rewarding, fulfilling, and varied career that you can take in anywhere you want to go. Job Purpose Provides engineering solutions as part of a SSE project taskforce, in accordance with TechnipFMC standards, procedures, processes, schedules, and budget, with a continuous concern for quality, targets, and customer satisfaction. Will be responsible for structural integrity, timeliness and cost effectiveness of all designs under their control and shall ensure that all design and design activities meet the requirements of the project and are fit for purpose. Job Description Independently perform structural design and analysis and supervise structural engineers performing design and analysis. Create and review technical engineering documents. Manage project design reviews and constructability reviews. Provide sound engineering advice on subsea structural analysis and design to ensure efficient and cost-effective fabrication, handling and subsea installation. Ensure technical compliance and quality as well as on‐time‐delivery of all responsible deliverables. Ability to mentor and manage a team of engineers & designers. Attend meetings with project teams and interface with clients and be able to provide engineering recommendations and solutions. Drives innovative solutions to optimize subsea structures and improve efficiency. Demonstrated experience in supporting engineering for subsea projects constrained by safety, quality, delivery, and cost requirements. Travel to and attend site as required to guide, inspect or oversee fabrication of structural items. You are meant for this job if: BS degree in Engineering preferred or equivalent with 3 to 5 years of experience in the field. Sound understanding of Engineering practices, design methods & calculations. Experience in mentoring, leading a team of engineers & delivering projects. Experience in structural steel design preferably in Offshore and Subsea field (Accordance with applicable industry code – DNV / ASME / API, etc.) and fatigue analysis. Experience in reviewing engineering designs, documents, layouts, calculations and interpreting FEA/ structural analysis results. Strong knowledge of engineering discipline and physical modeling techniques (solid mechanics, strength of material, fluid dynamics) is required. Strong technical basis in engineering Experience in SACS / other beam element software. Knowledge in Finite element experience on ANSYS / Abaqus software. Ability to work in a team-oriented environment. Strong written and verbal communication skills in English with ability to effectively transfer subject matter expertise. Skills Project Management Presentation Skills Analysis and Problem Solving Being a global leader in the energy industry requires an inclusive and diverse environment. TechnipFMC promotes diversity, equity, and inclusion by ensuring equal opportunities to all ages, races, ethnicities, religions, sexual orientations, gender expressions, disabilities, or all other pluralities. We celebrate who you are and what you bring. Every voice matters and we encourage you to add to our culture. TechnipFMC respects the rights and dignity of those it works with and promotes adherence to internationally recognized human rights principles for those in its value chain. Date posted: Jun 23, 2025 Requisition number: 13814

Hiring: PhD Aerospace Composites Specialist Line of Service: Research & Development Industry: Aerospace Specialism: Advanced Composites, Structural Engineering, Thermal-Structural Analysis Management Level: Research Specialist Job Description & Summary: Celestial Aerospace is engineering the next generation of hydrogen-lift launch systems. We are seeking a highly experienced PhD in Aerospace Composites to lead the design, analysis, and testing of advanced composite structures for aerospace applications. The ideal candidate will have deep expertise in thermal and mechanical characterization of composite materials, multi-layered shell design, and FEA-driven optimization for aerospace and cryogenic environments. Why Join Us? Be at the frontier of hydrogen-lift aerospace design and clean space access. Lead R&D efforts in high-performance composite spacecraft structures. Join a multidisciplinary team tackling aerospace’s biggest engineering challenges. Key Responsibilities: Perform design and FEA (ANSYS, ABAQUS) of aerospace composite structures (shells, pressure vessels, tanks, nozzles). Develop, test, and validate composite materials for thermal, cryogenic, and mechanical loads. Lead experimental campaigns (vacuum, thermal, and mechanical) and incorporate results into design and modeling. Evaluate buckling, post-buckling, thermal-stress, and ablation performance for composite cylinders and shells. Collaborate with design, thermal, and propulsion teams to integrate composite structures into the launch system. Maintain CAD, FEA, and PLM documentation ensuring seamless design workflow. Mandatory Skill Sets: PhD in Aerospace or Mechanical Engineering (Composites focus) Advanced FEA experience with ANSYS, ABAQUS (thermal and mechanical analyses). Strong background in composite fabrication and experimental characterization. Expertise in thermal-mechanical design of aerospace structures. Strong publication record in composite structure modeling and thermal analyses. Preferred Skill Sets: Hands-on experience with vacuum bagging, compression molding, and filament winding. Experience in aerospace thermal protection systems, cryogenic tanks, or ablation modeling. Familiarity with CAD tools (SolidWorks, CATIA), PLM platforms, and GD&T. Experience: Required: 3–5 years (including PhD) in aerospace composites design and thermal-structural analysis. Experience in aerospace R&D, academic research, or industry (launch vehicles, spacecraft, aerospace structures). Education Qualification: PhD in Aerospace Engineering (Composites, Thermal-Structural Focus) M.Tech/ M.S. Aerospace Engineering (Structures/Composites)

• Carry out static/transient, Linear/Non-linear thermo- mechanical FEA (Finite element analysis) & CFD of Steam Turbine static & Rotating components (e.g. casing, valves, rotor, bearing pedestals, blades, etc.) using commercial software such as ABAQUS, ANSYS-CFX. • Perform Low cycle fatigue, High Cycle fatigue, assessment of different components of steam turbine. Perform high temperature Creep calculation and assessment. • Able to logically interpret the calculation results and provide design change solution and perform design optimization accordingly. Seamless transfer of structural integrity calculation input and output between design team and project lead respectively. • Development of innovative solutions. Controlling risk of design changes with appropriate methods like FMEA. • Prepare and document FE calculation in the form of structural integrity design report. • Participate and conduct structural integrity design review at component level / project level. • As per the business needs, flexibly switch to other calculation topics like Rotor dynamics, Thermodynamics, etc. Therefore, additional experience in such calculations would be a great advantage.

TechnipFMC is committed to driving real change in the energy industry. Our ambition is to build a sustainable future through relentless innovation and global collaboration – and we want you to be part of it. You’ll be joining a culture that values curiosity, expertise, and ideas as well as diversity, inclusion, and authenticity. Bring your unique energy to our team of more than 20,000 people worldwide, and discover a rewarding, fulfilling, and varied career that you can take in anywhere you want to go. Job Purpose Provides engineering solutions as part of a SSE project taskforce, in accordance with TechnipFMC standards, procedures, processes, schedules, and budget, with a continuous concern for quality, targets, and customer satisfaction. Will be responsible for structural integrity, timeliness and cost effectiveness of all designs under their control and shall ensure that all design and design activities meet the requirements of the project and are fit for purpose. Job Description Independently perform structural design and analysis and supervise structural engineers performing design and analysis. Create and review technical engineering documents. Manage project design reviews and constructability reviews. Provide sound engineering advice on subsea structural analysis and design to ensure efficient and cost-effective fabrication, handling and subsea installation. Ensure technical compliance and quality as well as on‐time‐delivery of all responsible deliverables. Ability to mentor and manage a team of engineers & designers. Attend meetings with project teams and interface with clients and be able to provide engineering recommendations and solutions. Drives innovative solutions to optimize subsea structures and improve efficiency. Demonstrated experience in supporting engineering for subsea projects constrained by safety, quality, delivery, and cost requirements. Travel to and attend site as required to guide, inspect or oversee fabrication of structural items. You Are Meant For This Job If BS degree in Engineering preferred or equivalent with 3 to 5 years of experience in the field. Sound understanding of Engineering practices, design methods & calculations. Experience in mentoring, leading a team of engineers & delivering projects. Experience in structural steel design preferably in Offshore and Subsea field (Accordance with applicable industry code – DNV / ASME / API, etc.) and fatigue analysis. Experience in reviewing engineering designs, documents, layouts, calculations and interpreting FEA/ structural analysis results. Strong knowledge of engineering discipline and physical modeling techniques (solid mechanics, strength of material, fluid dynamics) is required. Strong technical basis in engineering Experience in SACS / other beam element software. Knowledge in Finite element experience on ANSYS / Abaqus software. Ability to work in a team-oriented environment. Strong written and verbal communication skills in English with ability to effectively transfer subject matter expertise. Skills Project Management Presentation Skills Analysis and Problem Solving Being a global leader in the energy industry requires an inclusive and diverse environment. TechnipFMC promotes diversity, equity, and inclusion by ensuring equal opportunities to all ages, races, ethnicities, religions, sexual orientations, gender expressions, disabilities, or all other pluralities. We celebrate who you are and what you bring. Every voice matters and we encourage you to add to our culture. TechnipFMC respects the rights and dignity of those it works with and promotes adherence to internationally recognized human rights principles for those in its value chain.

Job Title: CAE Engineer (Fresher) - Mechanical Engineer Location: Pune, India Job Description: We are seeking a talented and motivated CAE Fresher with a background in Mechanical Engineering to join our team in Pune. The ideal candidate should have hands-on knowledge of Hypermesh and excellent communication skills. This is a great opportunity to work with industry-leading CAE tools and gain experience in various simulation and analysis tasks. Key Responsibilities: Use LS-Dyna, Optistruct, PAMCRASH, ABAQUS, and RADIOSS software to develop and verify designs made from materials such as steel, aluminum, plastic, and composite. Perform simulation studies with static and dynamic load cases on structural parts. Conduct analysis on assemblies using adhesives for joining. Carry out full vehicle impact analysis (Front/Side/Rear). Analyze BIW (Body-in-White) parts for Modal Analysis and Durability. Perform analysis involving multi-materials and non-traditional joining methods. Analyze data and recommend design changes based on findings. Present simulation results to internal and external stakeholders. Conduct independent research related to simulation for current or new product areas. Perform Design of Experiments (DOE) using simulation methods to optimize designs. Qualifications: B.E./B.Tech in Mechanical Engineering or a related field. Proficiency in CAE tools such as Hypermesh, LS-Dyna, Optistruct, PAMCRASH, ABAQUS, and RADIOSS. Strong analytical and problem-solving skills. Good communication skills to interact effectively with team members and clients. Passion for learning and applying advanced simulation techniques in design processes. Location: Pune, India How to Apply: Please send your resume to kinjal.k@elenoenergy.com Job Types: Full-time, Permanent, Fresher Pay: ₹308,164.97 - ₹1,008,998.73 per year Application Question(s): Do you have a degree in Mechanical Engineering (B.E./B.Tech)? Are you proficient in using Hypermesh for simulations? Are you willing to work in Pune? Please mention your current ctc and notice period. Work Location: In person Application Deadline: 15/07/2025

About the company AUBERT & DUVAL Engineering India is a new and growing subsidiary of Aubert & Duval SAS of France, world leader in the manufacturing of closed die forging components for the aerospace and energy markets, located in the AEQUS SEZ, Belagavi, Karnataka, India. Our company provides engineering support to Aubert & Duval technical teams located worldwide, and also to SQUAD Forging India Pvt. Ltd., a Joint Venture between AEQUS and Aubert & Duval, located in Belagavi, Karnataka, India. SQuAD specializes in aerospace engine and structural parts like; landing gear, braking system and other closed die forging components. SQuAD processes titanium, nickel base alloys as well as aluminum and steel. SQuAD works also with customers in automotive, power generation, and oil & gas markets to manufacture their critical parts. Responsibilities Perform simulation studies of forging operations using Transvalor Forge Prepare finite element mesh using CATIA, prepare and launch simulations Work in tandem with the technical teams and expert in France to prioritize simulations studies and resources Ensure the correlation between the field and the simulation; improve the prediction of simulation means. Present and analyze simulation results / case studies Develop parametric CATIA V5 2D drawings and 3D models Interface with technical teams during development projects Perform feasibility study of various process steps to produce closed die forging parts during RFQ, taking into account existing robust production processes and equipment capabilities. Provide technical support for failure analysis of forging tools Acquire new skills in contact with the technical teams of Aubert & Duval France, especially in the field of close die forging for the aerospace industry Qualifications Degree in Mechanical or Metallurgical Engineering >3 years experience in simulation of mechanical systems using Forge NXT , Abaqus, Deform, Ansys, Autoform Design experience in one or more of the following areas: Forging or casting part design or sheet metal Mechanical systems Experience in interfacing / regular communication with an external party (customer / supplier) Open minded, and is able to propose alternatives or design improvements Must possess excellent communication, team working and time management skills. Knowledge in programming: C/C++, fortran, Python, VBA is a plus CATIA V5 experience on the following workbenches is a plus: Generative Structural Analysis, Advanced Meshing Tools, Part Design, Generative Shape Design, Assembly Design, Drafting Experience in aerospace industry is a plus Knowledge of French language is a plus

Job Description The candidates will be required to develop Engineering Services in the allocated territory with responsibilities including lead generation, mapping large existing customers for services opportunities, sales forecast, negotiation and closure. Candidate should be number driven and result oriented individual. The candidates should have very good communication skills and will be required to make presentations to CXO level prospects and large forums. Very strong engineering background with capability to conceptualize customer requirements is essential. To work with the clients in various sectors for different requirements of CAE projects to help plan their execution as per the available resources and promote the engineering services that we provide. Very strong engineering background with capability to conceptualize customer requirements are essential Relevant experience working in the field of Computer aided Engineering/ Design is mandatory. Target based sales with the purview to acquire, engage and scale customer relationships Setting up the appointments and scheduling the meetings, Technical Discussions & Demos with the clients. Negotiating the terms of an agreement and closing sales. Conducting Follow-ups till the deal gets closed. Coordinating with the tech support team & managers for strategizing the deals & discussing the prospective leads Requirements UG – Bachelors/Masters in any engineering domain (Preferred: Mech. / Prod. / Civil),PG - MBA/PGDM – Sales / Marketing is an added advantage Knowledge of Engineering Services using CAE software tools such as ANSYS, LS-DYNA, Nastran, Abaqus etc will be an added advantage. Excellent prospecting, qualification, presentation and selling skills. A team player attitude, customer service oriented with strong work ethic and hunter attitude a must. Willingness to travel. Benefits Challenging job and a chance to team up with a young and dynamic professional group Chance to build yourself as WE grow. Remuneration that stays competitive and attractive to retain the best. Opportunity to join an organization experiencing year on year growth For Any Queries Please Contact Vijay Oruganti | Sr.HR vijay.o@cadfem.in 8099068801 check(event) ; career-website-detail-template-2 => apply(record.id,meta)" mousedown="lyte-button => check(event)" final-style="background-color:#6875E2;border-color:#6875E2;color:white;" final-class="lyte-button lyteBackgroundColorBtn lyteSuccess" lyte-rendered="">

Job Title: Finite Element Analysis (FEA) Intern Location:[Remote-Online] Company: Mars Exploration Pvt Ltd Duration:1-3 Months Stipend: Unpaid 📎Role Overview: We are seeking a motivated intern to support our engineering team with Finite Element Analysis (FEA) tasks. The internship provides hands-on experience in structural simulation and design validation using industry-standard finite element analysis (FEA) tools. 📌Key Responsibilities: •Assist in setting up and running finite element simulations using software like ANSYS, Abaqus, or COMSOL. •Perform pre-processing (meshing, boundary condition application) and post-processing (data analysis, result interpretation). •Support in validating FEA results with theoretical or experimental data. • Collaborate with design and R&D teams to optimize components for optimal performance and reliability. •Document simulation procedures, results, and findings in a clear, structured manner. 🎖Qualifications: •Currently pursuing a Bachelor's or Master’s degree in Mechanical Engineering, Aerospace Engineering, or a related field. •Strong understanding of mechanics of materials, structural analysis, and numerical methods. •Familiarity with FEA tools (ANSYS, Abaqus, etc.). •Good programming/scripting knowledge (Python, MATLAB) is a plus. •Detail-oriented with strong analytical and communication skills. 📜What We Offer: •Hands-on experience with real-world engineering challenges. •Guidance and mentorship from experienced FEA professionals. •Opportunity to contribute to innovative projects. •Flexible working hours and potential remote work. •Certificate of completion and letter of recommendation upon successful internship. •Project Certificate •webinar Sessions 🎓What You Gain: •Deep understanding of FEA techniques and software. •Exposure to industry-grade engineering simulations. •Opportunity to build a portfolio of simulation work. •Enhanced teamwork, problem-solving, and communication skills. •A stepping stone to a career in simulation and design engineering ✅Registration Process: •Fill out the Pre-Registration Form https://forms.gle/vmpyrJjkFHnMu5fJ7 •Pay the Registration Fee ( Registration Fee: 1 Month- ₹1760/- incl gst 3 Months- ₹ 2760/- incl gst ) 🖇How to Apply: If you are eager to apply, we encourage you to send your resume/CV by mentioning the "Subject line of the Internship" to the WhatsApp ( 9177337166) Or fill out the Pre-Registration Form https://forms.gle/vmpyrJjkFHnMu5fJ7 #FEAInternship #FiniteElementAnalysis #EngineeringInternship #MechanicalEngineering #Simulation #ANSYS #Abaqus #COMSOL #EngineeringCareers #InternshipOpportunity #TechInternship #FutureEngineer #Internship2025 #CareerOpportunity #FutureEngineer#TechCareers #JoinOurTeam #ProfessionalGrowth #TechnicalInternship #EngineeringCareers#SoftwareInternship#MechanicalInternship #ElectricalEngineering#ComputerScienceInternship#FiniteElementAnalysis#FEA#FEAInternship#EngineeringInternship#SimulationInternship#CAE#MechanicalEngineering#StructuralEngineering#AerospaceEngineering#AutomotiveEngineering#ProductDesign#InternshipOpportunity#HiringInterns#InternshipAlert#TechInternship#EngineeringInternship #STEMInternship

Position Overview The Simulation Specialist is responsible for ensuring the technical success of our customers in their use of our software, Simcenter 3D. Working closely with customers to understand their engineering workflow, the Application Specialist proposes solutions and best practices to help the client meet their objectives as well as improve their processes. The role includes classroom training, mentoring, and providing direct customer support. The position works closely with the sales organization to discover opportunities to grow usage within accounts and engage the customer to realize that growth. Excellent communication skills and a desire to work with clients are critical to success in this fast-paced and broad engineering role. If you are creative, entrepreneurial, and possess excellent communication skills, we would like to hear from you. Requirements Responsibilities Act as primary point of contact to the assigned set of accounts for all technical issues related to their use of Simcenter 3D. Identify problems and take responsibility for successful resolution of issues. Facilitate the sales process in developing account intelligence, pursuing opportunities for growth of software usage, and assisting in software deployment. Conduct technical discussions with customers to collect and understand simulation requirements, propose solutions, and explain benefits of our approach. Conduct training on introductory and advanced topics in Simcenter 3D. Perform benchmark simulations and test cases to explore new methods, define best practices, and verify results. Work on multiple projects and support engagements simultaneously. Demonstrate new software capabilities to customers. Benefits Required Knowledge/Skills, Education, and Experience Degree in related field, with focus on FEA and structural mechanics. More than 3 years of industrial experience with Simcenter 3D, Nastran, ANSYS Mechanical, Abaqus CAE, etc. Ability to learn new skills and adapt to customer application needs. Excellent communication, organization, time management, and presentation skills. English and one or more of the Nordic languages. Preferred Knowledge/Skills, Education, and Experience Experience in meshing complex geometries, multibody dynamics, structural mechanics and dynamics, heat transfer, NVH and acoustics. Working knowledge of common design processes, objectives and constraints in one of the following industries: Marine, Aerospace, Automotive, Oil & Gas, Energy, combustion, electronic components, etc.

We are seeking a meticulous and skilled CAE Modeling Engineer to join our CAE team. In this role, you will be instrumental in the pre-processing phase of Finite Element Method (FEM) for vehicle Body-in-White and full vehicle models, focusing on Durability and NVH performance. You will be responsible for handling, validating, and preparing complex engineering data, CAD and BOM, to create high-quality FE models for analysis. This position requires a strong understanding of FE modeling best practices, excellent data handling skills, and the ability to communicate effectively with the modeling team. Required skills Bachelors degree in Mechanical Engineering, Automotive Engineering, or a related technical field. 3+ years of experience in CAE pre-processing, FE modeling, or engineering data preparation, preferably within the automotive industry. Proficiency with major FE pre-processing software (e.g., HyperMesh, ANSA). Experience handling and validating large CAD assemblies and complex geometric data. Strong understanding of engineering data sources such as BOMs, material specifications, and fastening standards. Solid knowledge of FE modeling principles, especially regarding the accurate representation of various connection types (welds, bolts, adhesives, etc.). Familiarity with Body-in-White or full vehicle structural components and assemblies. Ability to read and interpret engineering drawings, specifications, and technical documentation. Excellent attention to detail and a systematic approach to data verification and model quality checks. Good verbal and written communication skills for providing technical direction and clarifications. Good to have skills - Experience with specific CAD software (e.g., CATIA, 3DX or NX). Familiar with CAE solvers like Nastran, Abaqus or LS-DYNA. Experience with scripting languages (e.g., Tcl, Python) for automation of pre-processing tasks. Knowledge of Product Lifecycle Management systems (Enovia or Teamcenter). Basic understanding of Durability or NVH analysis principles. Perform detailed studies and checks on incoming CAD data, identifying missing geometry, evaluating data quality issues, and resolving geometric intersections that would impact FE model integrity. Develop and execute queries to extract, process, and verify critical input data from various sources, including CAD, Bill of Materials, Non-Geometric Data, connection lists, and other relevant engineering databases. Act as a technical liaison, providing clear direction, feedback, and necessary clarifications to the core FE modeling team regarding data issues, model requirements, and preparation methodologies. Apply relevant BOM information, material properties, boundary conditions, and other applicable FE mechanisms and attributes within the Body Durability and NVH FE models. Prepare and define complex system model connections and assemblies, accurately representing physical joining methods such as spot welds, seam welds, adhesives, bolts, springs, and other fasteners within the FE model. Execute geometry clean-up procedures, including performing de-penetration and resolving intersections both within individual component models and across complex system assemblies. Rigorously review Body Durability and NVH FE models against standard checklists, guidelines, and best practices to ensure accuracy, completeness, and adherence to modeling standards. Identify, diagnose, and effectively debug and fix errors, warnings, and inconsistencies within the FE models to ensure they are robust and ready for successful analysis runs.

WE ARE HIRING - Experienced Title: Aerospace R&D Engineer – Propulsion, Aerodynamics, CFD, Avionics & Structures (Multidisciplinary Role) Location: Chennai Company: Dr. MGR. Educational and Research Institute (ARI- IOT) Type: Full-time | On-site Aerospace Engineers · Design of propulsion systems, aerodynamics, flight mechanics. · Specialized in launch vehicle structure and dynamics. Propulsion Engineers · Develop engines (solid, liquid, hybrid). · Handle combustion physics, fuel systems, and thrust control. Mechanical Engineers · Structural integrity, material selection, thermal systems. · Integration of moving parts and mechanical assemblies. Job Description Sample (Condensed Multi-role): We are seeking a passionate and multidisciplinary Aerospace Engineer to join our early-stage rocketry team. The ideal candidate will have experience in: Designing propulsion systems (solid/liquid) Aerodynamic modelling and flight dynamics Structural and thermal analysis Nozzle design and CFD simulation Material selection for high-temperature/high-stress environments Design and integration of avionics subsystems (telemetry, GPS, INS, embedded systems) Preferred Qualifications: M. Tech, & Ph.D. in Aerospace, Mechanical, Avionics, or related fields Experience with Ansys, MATLAB/Simulink, Open Rocket, SolidWorks, or similar tools Hands-on experience with small rocket systems, engines, UAVs, or embedded platforms 🔬 Advanced Skills ( M.Tech / Ph.D. Candidates): Advanced thermo-fluid simulations (e.g., reacting flows, multiphase flows in propulsion) Proficiency in high-fidelity FEA and CFD tools : Fluent, CFX, Abaqus, LS-DYNA, STAR-CCM+ In-depth understanding of aeroelasticity, flutter, and structural dynamics Research experience or publications in propulsion, avionics, or launch vehicle design Development of custom Python/Matlab scripts for simulation automation and data analysis Experience in model-based design and digital twin technologies Deep familiarity with nonlinear materials , composite modeling , or thermal barrier coatings Ability to mentor junior engineers, contribute to technical documentation, and lead technical proposals Prior involvement in national-level research projects, ISRO/DRDO collaborations , or academic labs is a plus Salary Details: 2 years experience : ₹25,000–₹30,000/month (Negotiable for exceptional candidates) 4 years experience : ₹40,000/month (Negotiable for exceptional candidates & Based on previous salary) Apply Below link https://docs.google.com/forms/d/e/1FAIpQLSe_lM-MS5L6RcgkG1Q01zhGUtFHRC2hVtF9zhZ4fiRPatPMxw/viewform?usp=header

Job Purpose Design flexible pipe solutions for subsea applications, in accordance with TechnipFMC standards, procedures, processes, schedules and budget, with a continuous focus on quality, targets and customer satisfaction. Projects are varied geographically and range from concept design through to detailed engineering and life extension. Key Activities & Responsibilities: Critical analysis of project documentation, ensuring that all required inputs are available and clarified; Perform flexible pipe structure design in accordance with specification, design rules and manufacturing constrain; Perform configuration design using both industry standard software and in-house software; Perform thorough check of own work before submitting for further review; Liaise with Centers of Expertise on technical issues not covered by the standard design rules; Attend client meetings and make effective presentations in relation to the work performed; Actively engage with project teams to ensure successful product design and delivery; Prepare calculation reports, manufacturing specifications and contractual project deliverables; Check the work performed by other engineers; Promptly escalate concerns around risks to project execution to project stakeholders Constantly evaluate practices and champion improvements through application of lessons learnt and innovations; Act as Project Lead: Follow & support the work carried out by the resources under his/her project responsibility; Responsible to properly deliver engineering scope in chargewithin companys standards, meeting project quality/deadlines/budget & overall expectations; Provide guidance to the team with regards to project objectives; Define, control and ensure compliance of engineering activities schedule, aligned with project milestones; Estimate project engineering budget, ensure its compliance and keep a track of variations; Ensure that the discipline internal check process is followed for all the activities; Organize design reviews; Liaise with the appropriate Discipline Leads to ensure the optimization and feasibility of the project execution plan; Liaise with Project Management Teams; Deliver project close-out. PERSONAL QUALITIES Open communications skills are essential in order to maximise learning from fellow team members. A Flexible Pipe Design Engineer must have both enthusiasm and diligence for their specific field of expertise and a commitment to the continuous improvement of theirs and others engineering skills. The following qualities are essential: Confident and resourceful in the face of challenge (Can Do attitude). Ability to carry out assigned tasks and work on own initiative. Ability to work as part of a team. Demonstrates highest standards of integrity and respect. Good reporting skills Presentation and coaching skills Commitment to self improvement Willingness to learn. You are meant for this job if: FORMAL EDUCATION Engineering Degree (B.E/B.Tech/M. Tech or equivalent) in Mechanical Engineering / Naval Architecture / Ocean Engineering / Marine Structures / Aerodynamics / Civil / Materials and or/prior experience as design engineer REQUIRED EXPERIENCE + 3 years of experience as design engineer or PhD Strong technical basis in engineering Experience leading design engineering scopes is an advantage Service/Customer oriented Good command of English EXPERTISE Technical skills (required)Design Engineering, Basic Physics, Engineering Mechanics; Technical skills (nice to have)Experience in analysis e.g. FEA, Fluid Mechanics, Engineering analysis, Flexible Pipe, Dynamic analysis etc; Specific skillsInterpersonal, Communication, Problem Solving, Team Player, Pro-active Computer skillsMastery of desktop tools (Pack Office).Previous experience with OrcaflexTMor similar software is an advantage as is experience with automation (VBA, Python, Matlab etc) Language skillsFluent in English

Job Purpose At TechnipFMC, we deliver critical projects of a scale, scope and difficulty that you simply wont find anywhere else. We are looking for a SeniorInstallation Engineer with previous experience in dynamic analysis to join our team. Autonomous in the preparation and Offshore support activities for products installation, Ability to takeresponsibility for a package and lead a team ofEngineers on a major project, plan, prepare and confirm the specific procedures (validation test on site, transportation and installation) and associated calculation notes (design lifting slings) defining priorities, bring technical expertise during the procurement process, and confirm the project's progress at interim meetings with your Lead, realize the production of all documents and preliminary studies related to tenders and projects participate to vessel/CB mobilization as well as installation phases on vessel to validate technical solutions by respecting the rules of the Group HSEQ. warrant that your activities are conducted in compliance with the Project standards in terms of Quality, Cost & Time. ability to mentor and train engineers contribute to the development of team andsupport the development of computational tools; Perform all reasonable job tasks required by line manager. Participates as a fully contributing member of a project team; Must have the drive and initiative to independently communicate, gather information and make sound engineering decisions; You are meant for this job if: Proven track record of relevant work experience in the O&G sector or an equivalent industry with a minimum 5 years period; Experience of being project engineer on offshore instllation vessels. Complete autonomy, and capacity to coordinate and communicate during project execution phases; Practical experience of preparation, coordination, and execution phase of projects in general; Fluent in English, both verbal and writing; Good communication skills and business acumen to handle Clients/Project Managment/Offshore Personnel; Basicknowledge of Autocad Nice to have Experience with software like Orcaflex or Ansys Knowledge on different types of offshore vessels used in Project Execution Experience in oil & gas Subsea domaiN

Job Purpose Design flexible pipe solutions for subsea applications, in accordance with TechnipFMC standards, procedures, processes, schedules and budget, with a continuous focus on quality, targets and customer satisfaction. Projects are varied geographically and range from concept design through to detailed engineering and life extension. Key Activities & Responsibilities: Critical analysis of project documentation, ensuring that all required inputs are available and clarified; Perform flexible pipe structure design in accordance with specification, design rules and manufacturing constrain; Perform configuration design using both industry standard software and in-house software; Perform thorough check of own work before submitting for further review; Liaise with Centers of Expertise on technical issues not covered by the standard design rules; Attend client meetings and make effective presentations in relation to the work performed; Actively engage with project teams to ensure successful product design and delivery; Prepare calculation reports, manufacturing specifications and contractual project deliverables; Check the work performed by other engineers; Promptly escalate concerns around risks to project execution to project stakeholders Constantly evaluate practices and champion improvements through application of lessons learnt and innovations; Act as Project Lead: Follow & support the work carried out by the resources under his/her project responsibility; Responsible to properly deliver engineering scope in chargewithin companys standards, meeting project quality/deadlines/budget & overall expectations; Provide guidance to the team with regards to project objectives; Define, control and ensure compliance of engineering activities schedule, aligned with project milestones; Estimate project engineering budget, ensure its compliance and keep a track of variations; Ensure that the discipline internal check process is followed for all the activities; Organize design reviews; Liaise with the appropriate Discipline Leads to ensure the optimization and feasibility of the project execution plan; Liaise with Project Management Teams; Deliver project close-out. PERSONAL QUALITIES Open communications skills are essential in order to maximise learning from fellow team members. A Flexible Pipe Design Engineer must have both enthusiasm and diligence for their specific field of expertise and a commitment to the continuous improvement of theirs and others engineering skills. The following qualities are essential: Confident and resourceful in the face of challenge (Can Do attitude). Ability to carry out assigned tasks and work on own initiative. Ability to work as part of a team. Demonstrates highest standards of integrity and respect. Good reporting skills Presentation and coaching skills Commitment to self improvement Willingness to learn. You are meant for this job if: FORMAL EDUCATION Engineering Degree (B.E/B.Tech/M. Tech or equivalent) in Mechanical Engineering / Naval Architecture / Ocean Engineering / Marine Structures / Aerodynamics / Civil / Materials and or/prior experience as design engineer REQUIRED EXPERIENCE 1 to 3 years of experience as design engineer Strong technical basis in engineering Experience leading design engineering scopes is an advantage Service/Customer oriented Good command of English EXPERTISE Technical skills (required)Design Engineering, Basic Physics, Engineering Mechanics; Technical skills (nice to have)Experience in analysis e.g. FEA, Fluid Mechanics, Engineering analysis, Flexible Pipe, Dynamic analysis etc; Specific skillsInterpersonal, Communication, Problem Solving, Team Player, Pro-active Computer skillsMastery of desktop tools (Pack Office).Previous experience with OrcaflexTMor similar software is an advantage as is experience with automation (VBA, Python, Matlab etc) Language skillsFluent in English Skills