1.To follow up the MPD Activities. 2.NPD Material arrangements and Handling 3.product development card, Engineering change note and Process change note creations 4.Trial Casting follow up and Closing 5.Drawing managements and control 6.Development Document Control 7.Pre delivery inspection of pattern and core box 8.Pattern Maintenance Responsibilities Accountabilities Follow up the Trial and documentation Understand the Improvement and development requirements Prepare the Product development card. Process change request and Engineering change note.To Arrange the NPD material requirements from Internal department To make a trial To maintain Pre delivery inspection report of pattern and core box To record all process datas To adopt the New thinks and process in Developments Handle and manage the Operators and Contract Labours

1. Design PEK for machine enhancement and alternate for Obsolete components 2. Execution for Rollout of machines 3. Customer Complaint resolution Responsibilities Accountabilities 1.Ensure DFMEA deployment 2.Customer complaints resolution and Issue Tracker points Resolution 3.Achieve Flawless Mechatronics design using ACDE tools 4.Achieve zero defect Mechatronic system in the machine 5.Defines hardware verification plan to perform Verification Validation activites 6.Responsible for debugging design issues in Verification, Manufacturing, testing and Validation phases

1.To operate the molding machine with required quality and quantity 2.Individually mold core setting and closing with required quality and quantity 3.Follow the system in shopfloor by understanding SOPs and work instructions. 4.Maintain Safety systems in foundry Responsibilities Accountabilities Achieve daily output as per plan Deliver Production activities as per SOP and work instructions Identify unsafe operations and practices and report the same to supervisor immediately Maintain Safe working environment in workplace. Analysis nonconformity items root cause and corrective action Involve in process cycle time reduction Involve reduce raw material consumption Provide training new persons for molding process

1. Ensure 100% availability of machines with 100% adherence to the Preventive Maintenance Schedules Responsibilities Accountabilities Performing the activities as per the given preventive checklists. Monitoring the moving parts on daily basis for signs of excessive wear , defects damage. Lubrication of machines Adhere Basic 5S and keeping the work place, tools, spares clean Disposing of waste materials, oils, waste, etc as per ISO standards. Attending the Machine Break downs both electrical and mechanical Servicing of Equipments(Ex,Motors,Pneumatic cylinders,Hoists,Belt conveyors,Gears) Adhering to preventive maintenance schedule CLIR checklist Adhering the safety norms,work permits and to wear appropriate PPEs at workplace Identification and rectification of Near miss and unsafe condition Create and closing of work orders for respective shift maintenance activities Providing details of spares requirement to reporting person Attending Preventive and breakdown maintenance in EOT cranes , Forklift trucks and pallet trucks

1) Ensure the availability of machines equipment in right condition to meet the production requirements in SMD, PC, ASSLY 2) Carry out the PM of Machines as per checklist for trouble free operation of machine tools 3) Update Work Order after completion of breakdown 4) Implementation and support for TQM, ACME Other Projects Responsibilities Accountabilities Receiving the work request and creation of work orders based on work request. Execution of Mechanical breakdown in the areas of FRS, Rings Arranging material for Breakdown / PM from stores / fabricate parts and replacing the same for rectification. Attending the machine breakdown along with service engineer if necessary. Trial run of the machine after rectification / PM and handing over the machine for production Preparation of drawing for fabrication of parts inhouse Carry out PM of machines as per checklist. Take corrective and preventive actions. Carry out geometrical test as per machine test chart as and when required. Co-ordinate provide support for reconditioning / retrofitting of machines Co-ordinate provide support during new machine installation and layout change Update Work Order with details of work carried out resources, complete the Work Order after completion of breakdown Co ordinating with Mfg for implementation of TQM, ACME Other Projects

1.To operate the molding machine with required quality and quantity 2.Indivitualy mold core setting and closing with required quality and quantity 3.Follow the system in shopfloor by understanding SOPs and work instructions. 4.Maintain Safety systems in foundry Responsibilities Accountabilities Achieve daily output as per plan Deliver Production activities as per SOP and work instructions Identify unsafe operations and practices and report the same to supervisor immediately Maintain Safe working environment in workplace. Analysis non conformity items root cause and corrective action Involve in process cycle time reduction Involve reduce raw material consumption Provide training new persons for molding process

1.To operate the moulding line with no process deviations. 2.Follow the system in shopfloor by understanding SOPs and work instructions. 3.Maintain Quality systems in assigned department. Responsibilities Accountabilities Acheive daily output as per plan Deliver Production activities as per SOP and work instructions Identify unsafe operations and pactices and report the same to supervisor immediately Maintain Safe working environment in workplace. Identify problems in production and analyze root causes derive resolutions along with supervisors Increase speed and efficiency in process without compromising quality Involve in new product development activities Involve process improvements to effectively utilize equipement and materails to maximise production Provide trainning and guidance to new apprentices to accomplish production targets

1. Design, test and troubleshoot Mechatronics software system 2. Machine application software through Modular Programming and test with Test Jigs for concept 3. Ensure proper communication interface protocols 4. Customer Complaint resolution Responsibilities Accountabilities 1.Customer complaints resolution and Issue Tracker points Resolution 2.Achieve Flawless Mechatronics design using ACDE tools 3.Achieve zero defect Mechatronic system in the machine 4.Ensure DFMEA deployment 5.Defines software verification plan to perform Verification Validation activities 6.Responsible for debugging design issues in Verification, Manufacturing, testing and Validation phases 7.Test Jig development

Execute customer tooled up trials within specified time and as per the committed terms Prepare Trial data, Photo album of the trials conducted. Attend customer complaints Visit customer for tooled up trials, Productivity improvement exercises, programming tooling support Operation training Coordinate with HO Application Engineering team, for Work out on inquiries received from Marketing in the form of feasibility study, competitive time estimation, and tooled up proposal within stipulated time. (Need based) Responsibilities Accountabilities: To study the drawings at Customer end and evaluate its worth to our HO application team for preparing the tooled up offer To discuss with Customer on the tooled up offer and leverage for the tooled up Order conversion To conduct the trials at customer end in Co-ordination with HO team To attend the application related Complaints from the Customer To Provide training to our customers- First time buyers on optimum Machine usage Receive and study the customer enquiries. Prepare tooled up offer for customer with in stipulated time Based on the component, decide the appropriate process for parts machining Decide the work holding method and type based on the job nature Select the proper cutting tools and holders depending on the job material and profile Work out optimal time cycle time as per customer expectation. Prepare time sheet Develop part programs Expertise in Lathes and machining center operating knowledge Prove out the jobs on respective machine Prepare Final trial report and record the report in database Prove out the tooled up machines during commission / customer visits as per our order commitment

1.To operate the cold box and mixer machine with required quality and quantity 2. Individually core making and core coating with required quality and quantity 3. Follow the system in shopfloor by understanding SOPs and work instructions 4. Maintain Safety systems in foundry Responsibilities Accountabilities Achieve daily output as per plan Deliver Production activities as per SOP and work instructions Identify unsafe operations and practices and report the same to supervisor immediately Maintain Safe working environment in workplace. Analysis non conformity items root cause and corrective action Involve in process cycle time reduction Involve reduce raw material consumption Provide training new persons for core making process

1. Ensure 100% supply of Reclaimed and Newsand To all production Centres With out shortage. 2. Ensure quality and on time delivery to molding line 3. Adhering to TQM, ACME, GreenCo, QMS and OHSMS Standards 4. Continual improvement" Responsibilities Accountabilities Ensure Zero line stopper Due to Excess sand in Silos ,With Sand balancing. Collect all sand ,Dust and Thermal gas consumption datas On daily basis and it should be updated. Daily monitor if any Leakages of sand ,water and Dust in Pipe line, IT should be corrected Immediatly with help of TPM Identify if any Unsafe work and unsafe act in our department ITshould be highlited and corrceted With help of concern department Ensure Shop floor in Clean condition. Training for Newly joined CL In all Machines (Sand drier,Thermal,G20 and C9 craneoperation.) Maintaining ISO9001-2015,EOHS/EMS Records and monitoring calibaration of equipment.

1) Support the SIC in implementation of spares sales strategies by providing Quotation Proforma Invoice to customers, and ensuring invoicing of the material despatch Responsibilities Accountabilities Support the SIC in implementation of spares sales strategies by providing Quotation Proforma Invoice to customers, and ensuring invoicing of the material despatch Ensure customer satisfaction by bringing in efficiency in processes and executing activities for order execution Ensure Quote generation Proforma generation in receipt of Order Ensure material availability of Spares Raise request for PR WO for ordered Spare fore cast Spares Follow-up with Planning SCM for availability of material Providing pick list to stores Invoicing Ensure despatch of Spares to customers Ensure adherence to business excellence processes and procedures in all activities related to the department Suggest and use of latest technologies and tools for available in the market for the activities within the section Use of technology to automate and enhance efficiency of the processes

Responsible for Calibration of Composites parts manufacturing assembly to achieve quality targets Execute QC activities that translates to reduction of COPQ(Cost of Poor Quality) and wastage Ensure the highest quality output that meets customers expectation in the most cost effective manner, through Calibration quality control activities along with action planning for identified gaps Supervise the Calibration activities Responsible for all the document related activities as per QMS requirement and Aerospace standards. Carry out In process inspection in each stage of process and Final Inspection and confirm the key characteristics Ensure each stages of operations are closed in Route card/ oracle in timely manner Verify the Configuration Status of each part Ensure to achieve Process capability for CTQ parameters Provide on job training and assistance for new joiners in the team. React productively and handle other essential duties or tasks as assigned. Ensure adherence to business excellence processes and principles in all activities Collect quality data for identification of trends and areas for improvement for action planning to fill the gaps Coordinate with the automation team, to identify use cases , and drive automation initiatives within the section Suggest and use of the latest technologies and tools for quality control measurement Attend MRB discussions, Support for Root cause analysis Visit to customer/Supplier locations for clarification of queries if any Understand and follow up for entire Testing activities (Mechanical testing, Incoming, Chemical and NDT). attend DWM meeting, Sunrise meeting.

1.Perform Maintenance activities including Breakdown,Preventive,Planned and Predictive Maintenance 2.Spare parts Planning and Procurement 3.Co ordination with Internal department for ISO and EOHS Auditing work (internal external Audits) 4.Carrying out OSP Activities 5.Keeping Machines and Equipments in working condition as per rated Specification. 6.Asset Transfer and Disposal 7.AMC Monitoring Responsibilities Accountabilities Co-ordination for Preparing Annual Budget and maintaining the alloted budget Indigeneous Spare Parts Planning and taking action for Procurement in co-ordiantion with SCM to reduce cost Guidance for Solving Critical Problems in Machines and Equipments inside the Plant Taking action for Reducing MTTR for Critical Machines through IoT (CMS and PMS) Spare parts Planning and taking Procurement action in time to increase Machine Availability Ensuring Erection and Commissioning of New Capex Machines in time frame. Co-ordinating for Refurbishing of Machines Monitoring and Maintaining Statutory records as per legal norms Supporting for Implementation of TQM in PPC Zone (14 Machines) Maintaining Assets and Equipments in good working condition by using Maintenance Tools like TQM,TPM ,CMS and PMS Getting new drawing numbers for other depts.and issuing workorders Carryig out OSP Activities , workorders creation,PR creation.PO followup,RT formalities completion and storing of Spares in stores. Monitoring of AMC Activity for Statutory Equipments Co-ordinating for Transfer and disposal of Assets based on approval and completing formalities in Oracle System . Co-ordination with inter-department team for ISO and EOHS Quality Mangement Working on Energy Saving projects to reduce Energy

Support the DIC by accomplishing efficient On time Delivery of design release, First time right, and Continual Improvement on skill in Design for Composite parts. Responsibilities Accountabilities Support the DIC by accomplishing efficient On time Delivery of design release, First time right, and Continual Improvement on skill in Design and Analysis. Support the DIC In manging the budget for Engineering department and ensuring that resources are used efficiently. Suggest innovative ideas to reduce cost and improve productivity and efficiency. Control the rejections so as to save costs and produce outputs that are as per specified quality standards and as per customer requirements. Enable customer satisfaction by driving efficiency in internal processes within the department. Ensure appropriate, suitable actions towards customer complaints, so as to facilitate both customer retention as well as identify methods that helps in preventing such breakdowns from recurring. Stress analysis (Composite Metallic) and to checking the detail as per any OEM standards. To work with various analysis types such as linear statics, nonlinear statics (contact, material and large deformation), dynamics (normal modes and cyclic modal). Working knowledge of PATRAN/NASTRAN is most essential requirement. Familiarity with other FEA software will be an advantage Designing of composite parts through Composite Design (CPD) in Catia. Performing FE Modeling (Shell and Solid), FE Analysis for various structural Components. Good exposure on Material properties and allowable. Experience in Hand calculations. Providing design Suggestion /Modification based on failure. Interpreting and understanding FEA results, post-processing and preparing comprehensive analysis reports. Plan and promote continuous improvements in material, machine utilization and process to improve section individual productivity, and quality of the product. Coordinate with the automation team to identify use cases and drive automation / process improvement initiatives within the Section

Support the team in developing good quality castings with maximum possible yield within shortest possible lead time Support the Product and Process engineering function in Identifying the high cost items in PD process and initiate cost reduction actions to reduce cost Work towards maintaining COPQ(Cost of Poor Quality) of the unit within the acceptable target limits Ensure the highest quality output that meets customers expectation in the most cost effective manner, through efficient new product development processes Work along with Project Management function regarding new development castings approval by customers Revalidation of NPD Failure parts and Clear upto Fdy NPD Gate 7 Revalidation of Production Failure parts using MAGMASOFT software Find out high sand metal Ratio items and Bring them below target Creation of Department Layouts in foundry Finalizing of new pattern mounting and parting line design 3D Modelling of Running and Feeding system Knowledge to Prepare details of pattern, core box mould,core,chill,gating for Review with Cross functional team for new product development Finalizing the running system for new products through MAGMA simulation soft ware Find out the low yield castings, revisit modify running system by using MAGMA simulation soft ware Maintain of Records, documents(ISO, OHSAS TQM) and its retrieval Ensure adherence to Business Excellence processes in all activities related to the Product and Process Engineering function, approve TQM status monthly audit in inter-department Support innovation and automation centre team to explore and implemented novel technologies in the field of product development Identify and use the latest technologies and tools in the field of New product development for Foundry Designing of Moulding Box and accessories Create Drawings for maintenance departmment Prepare PFMEA for NPD process Discuss internally regarding the new product

Facilititate customer satisfaction through on time Submission of FAI Production. Responsibilities Accountabilities Develop and implement project management best practices, methodologies and tools to ensure project success and alignment with business objectives. Track and ensure achievement of milestones at the cost fixed by the Management, and to ensure ROI. Achieve Profitability as per RFQ To ensure the effectiveness in sales turnover targets Enhance customer satisfaction through efficient project management to enable achievement of business units vision and goals Acheive value added order inflow Ontime submission of FAI Creating a project plan, assigning tasks and responsibilities, and ensuring that the implementation is on track and on time Ontime collection of Payments Identify and manage risks and issues, and develop contingency plans to mitigate their impact. Conduct research and analysis to support project decision-making and recommendations, including the development of reports and presentations. Assist in the planning, coordination and execution of projects, including tracking project timelines, milestones and deliverables. Acheive production OTD Maintain accurate project documentation, including meeting notes, project status reports, and other relevant project-related materials. Identifying areas for improvement in the business units strategy implementation processes and driving continuous improvement.

Responsible for day to day achievement of quality targets by implementing stringent Assembly quality control activities Monitor critical quality metrics and parameters required to meet profitability and customer satisfaction targets Execute activities that translate to reduction of COPQ(Cost of Poor Quality) value within Assembly part of the value chain Ensure the highest quality output that meets customers expectation in the most cost effective manner, through Assembly quality control activities along with action planning for identified gaps Plan and execute of Inspection activities as per DRO Schedule Prepare document, cutting report, test chart reports, mc file updation in system of every machines and provide clearance for locking and FG Ensure final checking of TC MC series machines deliver to customer zero defect Provide COP training (Axis calibration, geometry checking for customer, test component.) for inspectors Execute mechanical functional inspection ,final inspection checking procedure training to Inspectors. Provide training to prepare machine document, CT report, test chart reports Conduct Geometry, laser calibration and cutting test to facilitate customer inspection involved TC MC series machines. Ensure daily stage wise Inspection at assembly, and resolve issues identified through supporting departments (Min, R D, SCM and Shop QA) Update the quality plan and check list for the requirement based by customer complaints, quality improvement required areas Resolve the chronic customer complaints through CFT and customer complaints within 30 days for Mfg. complaints in TC MCseries Ensure Validation of New product TC MC machines as per SOP Execute Standard cutting in Special execution machines as per the standard test parameters requirements of the machine. Execute the consolidation of TC MC Series and initiate Necessary Corrective and preventive action with co ordination of respective functions Ensure identification and addressing any Assembly quality issues or defects, by working with the operators Ensure maintenance of accurate and up-to-date records of quality control activities and results Analyse customer complaints and initiate action in coordination with CFT Ensure verification of the documents / records of Final machine clearance Review of Quality system in Assembly Work towards on time Closure of Customer complaints with action in DEMS module, by working with the operators Track suitable targets and KPIs for the team to ensure effective performance and delivery Oversee the workflow and work assignments of the team to ensure effective collaboration among teams, team members and consistent, quality work Collect quality data and identify trends and areas for improvement for action planning to fill the gaps Prepare reports on quality control activities and results to the stakeholders, and advice on appropriate action to solve issues Suggest and use the latest technologies and tools for Assembly quality control measurement Drive continuous learning and skilling of operators on soft and hard skills essential for the section Track performance measures of the operators and individuals to consistently provide feedback and improve performance Train operator / technician to improve their skill set and ensure defect free products

1. Responsible to execute activities for metallic parts as per daily plan assigned 2. Improve responsiveness to customer needs 3. Maintain quality standards and requirements in activities and output produced from assembly 4. Effective utilization of resources. 5. 100% Adherence to standard operation procudres to deliver components parts with Zero defects Responsibilities Accountabilities Responsible to execute activities in assembly function to ensure on time delivery of Defect free products, Spares and services Execution of assembly activities and looking for ways for improvement /driving continual improvement initiatives ideated by senior leaders on Quality, Delivery and Cos Follow/ suggest updation in assembly processes to enable continuous reduction in cost of production and work with a culture of cost consciousness in the organisatio Work towards for maintaining COPQ(Cost of Poor Quality) from assembly processes within the acceptable target limits Ensure responsiveness to customer needs Work with SIC and team for Customer complaint Analysis and resolution and Solving of key critical complaints using QC story methodology Work with the SIC to ensure amendments that arise due to internal and external customer requirements are met accurately Execute daily work load assigned by supervisors Engineers Adhering the Cyle time for all production parts Collect the BOM parts from assembly stores and Verify with router MTS for operation. Ensure the availability materials are provided by the assembly stores to acheive the target Following Maintaining the TQM and 5s in metallic shop Optimum utilization of resources like (Material, Machine) Manufacturing the FAI,Production parts out put with 100% quality Fallowing the Route card Process document executing the actvities as per process AOPs Guide the fresh technicians on job training to improove their skill level Ensure the machine/tool is working to the required level to meet the targets Assembly work instructions to be followed, using of Pneumatic Hand tools and cutting tools. Working Knowledge on Consumables specification, Preparation Application and shelf life, Expiry details Jigs Fixtures calibration to check before starting of work. Ensure the inspection parameters as mentioned in MTS by filling SIR report with respective calibrated instruments Stages to be moved on ERP after completing the work order operations. OLE (Work order scanning) should be achieved more than 90 percentage as planned. Follow PPE In Work Place Identify Near miss and implemented kaizen for every month. Working knowledge on Bush Helicoil and Pin installation opeartions Work with the automation team to identify use cases and drive automation / process improvement initiatives within the assembly function Update oneself on the latest technologies and tools within assembly and suggest / use these within the function Drive continuous learning and skilling of operators on soft and hard skills essential for the assembly department Track performance measures of the operators and individuals to consistently provide feedback and improve performance

1. Responsible to execute activities in assembly function to ensure on time delivery of Defect free products, Spares and services 2. Work towards continual improvement on Quality, Delivery and Cost 3. Improve responsiveness to customer needs 4. Maintain quality standards and requirements in activities and output produced from assembly 5. Ensure efficient man power management and skill development Responsibilities Accountabilities Responsible to execute activities in assembly function to ensure on time delivery of Defect free products, Spares and services Execution of assembly activities and looking for ways for improvement /driving continual improvement initiatives ideated by senior leaders on Quality, Delivery and Cost Follow/ suggest updation in assembly processes to enable continuous reduction in cost of production and work with a culture of cost consciousness in the organisation Work towards for maintaining COPQ(Cost of Poor Quality) from assembly processes within the acceptable target limits Ensure responsiveness to customer needs Support the resolution of customer concerns, Identify and eliminate root cause using various methods Work with SIC and team for Customer complaint Analysis and resolution and Solving of key critical complaints using QC story methodology Work with the SIC to ensure amendments that arise due to internal and external customer requirements are met accurately Responsible for Job Allocation to Workmen (Assly,Sub Assly,Packing, Spares) Prepare Machines Specification Chart (Monthly Schedule) Prepare Assembly Move Orders and Move Orders for Consumable Items Manpower work allocation as per the DRO plan Check the material availability as per draw list before the start of assembly Check for the assembly of machine as per scope and assembly WI Verify the in line observed values at each stage of assembly Collect data and do elemental analysis to identify the bottle neck operations for cycle time reduction Prove and implement the proposed actions for cycle time reduction Closing of DEMS with 5 days and adhere to CA / PA . Implement TQM initiatives and facilitate QC story for identified projects Proving of electrical assembly Identify assembly related QP points for NPD Ensure WIP pad Pending Checking Controlling System transaction for Spares, Machinery and FR Despatches Ensure Entry in System for Machine Crane Breakdowns Conduct Design Alteration Meeting ECR Updation Ensure efficient Facilities Arrangement for Material Handling /Tools/Fixture and Storage Conduct Customer complaint analysis using QC story, DMAIC approach Execute Team Activities KHO / QCC ) Documentation / Maintenance And Updation Drive the process for QMS,EMS,OHSAS Documentation / Maintenance And Updation Execute Packing list generation and inspection of DD, FR items Lead and coordinate for Assembly process stage wise Quality audit Coordinate with QA for Final Inspection for All Machines, along with training on QA processes/standards for all operators Maintain Calibration record and ensure instruments complying with calibration requirements Execute Training For New Operators And Monitoring Effectiveness Ensure Operator Kaizen for Entry and monitoring Lead Daily shift meeting to Discuss on QCD Ensure Multi Skill Training for Operators Ensure adherence to Business Excellence processes in all activities related to the assembly department, through training, practicing, audits and corrective actions Oversee the workflow and work assignments of the team to ensure effective collaboration among teams, team members and consistent, quality work Execute Process improvement initiatives and Error proofing identification through FMEA Work with the Assembly IE team to identify use cases and drive automation / process improvement initiatives within the assembly function Update oneself on the latest technologies and tools within assembly and suggest / use these within the function Drive continuous learning and skilling of operators on soft and hard skills essential for the assembly department Track performance measures of the operators and individuals to consistently provide feedback and improve performance