47 Itp Jobs

SUMMARY Hiring: Branch Sales Executive Fresher Opportunity in a Leading Bank Location: Gurugram Rural, Rai, Jhajjar, Behror Salary: 14,000 In-Hand Week Off: As per Bank Policy Shift Timing: 9:00 AM 6:30 PM Eligibility: Any Graduate / Postgraduate (0 11 months of experience) Tech Graduates are not eligible for this role. Job Responsibilities: Support the branch team in daily sales and service tasks Help customers with account opening and paperwork Follow KYC and bank guidelines Assist with customer handling and other branch work Requirements Any Non Tech Graduate or Postgraduate (0 11 months experience) Good spoken and written communication Basic knowledge of computers (MS Office) Benefits Branch working exposure Getting training from expert banking specialist senior people

* Develop & implement project-specific quality plans & procedures * Prepare & present quality reports to project stakeholders * Participate in project meetings * Identify areas of process improvement to enhance overall quality performance Required Candidate profile * Monitor materials, workmanship & construction processes for compliance with safety & quality regulations * Review contractor quality documentation including ITPs, method statements & test results.

The Role As a SQS Coordinator with Worley , you will work closely with our existing team to deliver projects for our clients while continuing to develop your skills and experience etc. Perform following activities during Procurement: Development of Worleys Surveillance Plans (WSPs) / Indicative ITPs (IITPs) for critical material and equipment Review Technical Queries during proposal stage and provide resolutions Participate in selected Supplier activities (e.g. pre-award, kick-off, and/or pre-inspection meetings, Hold points, etc.) Manage and coordinate with Vendor, TPIA & Customer for Inspection Develop inspection assignments and ensure source inspection is conducted by qualified individuals in accordance with WSPs / IITPs and Suppliers approved ITPs Review Quality Control Procedures like, Hydrotest, Welding (WPS, PQR, WPQ, Weld Map) , NDT procedures, Painting procedure, Hardness procedures, Pickling and Passivation, etc. Review the Test Certificates (TCs) and Quality Control / Inspection reports from Suppliers. Review and distribute source inspection reports, and ensure deficiencies are tracked, resolved and reported to Project Teams, SQS Lead, and other stakeholders as applicable. Assisting the Inspector in obtaining clarifications and interpretations to quality standards, industry codes, and Engineering and Customer specifications. Ensure non-conformances and proposed dispositions are documented and approved by the Project Team and resolved by the Supplier. Factory Acceptance Test (FAT) Coordination. Maintain Inspection Log, verify TPI Time Sheet and Invoices Receive feedback from sites with regard to quality issues of received material and equipment. Perform Supplier Performance Rating Reports with Project Teams on select purchase orders, and provide feedback. Assist in Supplier performance evaluations. About You To be considered for this role it is envisaged you will possess the following attributes: Mech. Degree with 12 + years experience / Mech. Diploma with 15+ years experience. Inspection experience, Code knowledge, knowledge of various QC procedure, Test reports, MTC review. Experience in Consulting, Engineering and / or Contracting Company (EPCM, PMC, LSTK P

Technical Review Pre-Contract Support- Sales Responsible to assist the Manager TS In performing the review of technical specifications received during the enquiry stage for the project and Regular enquiries as per the defined criteria and Identification of the Exceptions/Clarifications and suggest alternatives/ up gradations. In clarifying the technical terms during negotiation with the customer and supplier. In preparing Compliance statement/Technical Exception/Clarification, and negotiate our technical proposal with customers through TQs. Meeting with the customers on behalf of Manager TS- where required. Pre Sales Order Technical Support Purchase Responsible to assist the Manager TS In preparing Technical compliance sheet to obtain the concurrence of the supplier For evaluating vendor offer for technical compliance with project requirement To evaluate Exception/deviation from the supplier and provide the feedback to sales/customer Post Order Technical Support Responsible to assist the Manager TS Review of technical deviations/concessions arise during order execution after the PO placement from the customer in resolving the technical issues arise during the execution of the orders and support QC/Commercial /Procurement team Stock Purchase Technical Support Responsible to assist the Manager – TS in Standardization of Stock Specification to optimize the stock considering the techno-commercial aspects of the market requirement. Non Material Requirements Review of the preproduction technical documents of the B2B project and regular orders for its compliance to customer requirement Timely submission of the preproduction documents and ensure its timely approval Assist the supplier to understand the customer comments and ensure that it is duly incorporated Health and Safety Adhere to company’s HSE procedure, policies. Knowledge, Skills & Experience: Bachelors degree in Mechanical Engineering from a recognized and reputed university. Minimum 5-7 Years of relevant experience in similar role within the Piping and Oil & Gas industry. Strong knowledge of international standards such as ASTM, API, ASME, ISO, NACE etc. ASNT Level II certification in UT, MPI, PT, RT is mandatory. Proficient in English, both verbal & writing. Hands-on experience with piping components including pipes, fittings, flanges, valves, gaskets, etc. Skilled in reviewing client specifications, technical datasheets, material standards, and ensuring compliance with project requirements. Proven experience in managing project documentation such as, VDRL, ITP, MPS, WPS/PQR, NDE Procedure, MRB etc. Familiar with documentation control, NCR handling, and quality audits (preferred).

The Role As a SQS Coordinator with Worley, you will work closely with our existing team to deliver projects for our clients while continuing to develop your skills and experience etc. Perform following activities during Procurement: Development of Worleys Surveillance Plans (WSPs) / Indicative ITPs (IITPs) for critical material and equipment Review Technical Queries during proposal stage and provide resolutions Participate in selected Supplier activities (e.g. pre-award, kick-off, and/or pre-inspection meetings, Hold points, etc.) Manage and coordinate with Vendor, TPIA & Customer for Inspection Develop inspection assignments and ensure source inspection is conducted by qualified individuals in accordance with WSPs / IITPs and Suppliers approved ITPs Review Quality Control Procedures like, Hydrotest, Welding (WPS, PQR, WPQ, Weld Map) , NDT procedures, Painting procedure, Hardness procedures, Pickling and Passivation, etc. Review the Test Certificates (TCs) and Quality Control / Inspection reports from Suppliers. Review and distribute source inspection reports, and ensure deficiencies are tracked, resolved and reported to Project Teams, SQS Lead, and other stakeholders as applicable. Assisting the Inspector in obtaining clarifications and interpretations to quality standards, industry codes, and Engineering and Customer specifications. Ensure non-conformances and proposed dispositions are documented and approved by the Project Team and resolved by the Supplier. Factory Acceptance Test (FAT) Coordination. Maintain Inspection Log, verify TPI Time Sheet and Invoices Receive feedback from sites with regard to quality issues of received material and equipment. Perform Supplier Performance Rating Reports with Project Teams on select purchase orders, and provide feedback. Assist in Supplier performance evaluations. About You To be considered for this role it is envisaged you will possess the following attributes: Mech. Degree with 12 + years experience / Mech. Diploma with 15+ years experience. Inspection experience, Code knowledge, knowledge of various QC procedure, Test reports, MTC review. Experience in Consulting, Engineering and / or Contracting Company (EPCM, PMC, LSTK Projects), Fabrication and / or Third-Party Inspection Agency experience. Experience in O&G, Chemical industries. Certification and Experience: Minimum required ASNT Level-II certification in MT, UT, PT, RT, VT, etc. Welding Certification like CSWIP / AWS / International Welding Inspector (preferred) and Paining and Coating certification (preferred). Knowledge of various Materials, CS, SS, DSS, AS, Titanium, other Exotic materials, FRP. Knowledge of various Code and Standards like ASME, API, IS, ASTM, BS, etc. Thorough understanding of the principles and practice of supplier inspection management and the implementation and improvement of supplier management systems. Highly motivated team player with excellent leadership skills. Communication skills verbal, written to report standard. Strong coordination/organizational skills with ability to identify and prioritize critical tasks and deliverables Experience in managing a team of inspectors would be a benefit.

Responsibilities: * Boiler Erection Quality Engineer. * Conduct WPS development & implementation * Ensure compliance with ASME codes & NDT methods * Presure Part & Piping * Manage welding inspections & PQR programs Provident fund Health insurance Office cab/shuttle

Key Responsibilities: Supervise, inspect, and manage mechanical works related to refinery equipment, piping, storage tanks, heat exchangers, and other static/rotating equipment Carry out third-party inspections as per project and industry standards, ensuring compliance with engineering specifications, safety codes, and quality guidelines Review and validate equipment certifications, inspection test plans (ITP), WPS/PQR, and quality documentation Coordinate with OEMs, EPC contractors, and clients during inspection and testing of mechanical components Monitor fabrication, erection, and commissioning activities to ensure compliance with mechanical standards Ensure accurate documentation of inspection activities, non-conformities, and corrective actions Provide technical support and consultation during procurement, installation, and pre-commissioning Maintain updated knowledge of international standards (ASME, API, ISO, etc.) related to mechanical inspection Desired Candidate Profile: B.E/B.Tech (minimum 3 years) or Diploma (minimum 5 years) in Mechanical/Electrical Engineering from a recognized university Experience in refinery, oil & gas, or petrochemical sectors Extensive experience with third-party inspection of mechanical equipment and systems Familiarity with inspection and testing procedures including NDT, hydrotest, pneumatic tests Strong communication and coordination skills for client/vendor interface Proficient in MS Office, AutoCAD, and engineering documentation tools

To design and implement the quality assurancesystems for a new fabrication plant, ensuring that all processes,documentation, and standards are embedded into the execution flow from Day 1,enabling smooth job release, traceability, and client satisfaction withoutbecoming a bottleneck to project throughput. Key Responsibilities A. System Setup Documentation Design and implement QA systems, including SOPs,WPS libraries, ITP formats, QAPs, weld maps, and inspection logs Develop templates and processes for weldtraceability, consumable control, inspection hold points, and QA checklists Create and maintain documentation for ISOreadiness, internal audits, and customer inspection folders from Day 1 B. Execution Integration Collaborate with PPC, Design, and Productionteams to embed QA checkpoints in job release Audit job readiness (drawings, WPS, kits) beforerelease to catch gaps early Coordinate with the Welding Expert and the QCLead to ensure proper WPS use, welder qualification records, and inspectionalignment C. Monitoring, Training Escalation Lead root cause analysis (RCA) of quality issuesin trial runs and initial projects Analyze NCR trends, internal audits, and QCreports to drive updates to QA documentation and systems Train section teams and welders on drawingdiscipline, WPS compliance, traceability protocols, and QA forms Escalate breakdowns in adherence, repeatedissues, or gaps in documentation flow to the Quality Head D. Client Compliance Readiness Ensure QA folders are ready for each project perclient format (QAP, WPS, inspection reports, weld maps, etc.) Liaise with clients, third-party inspectors, andauditors for QA walkthroughs, system demonstrations, and documentationsubmission Support calibration record maintenance andinternal audit closure Qualifications Experience B.Tech / Diploma in Mechanical / Production / Metallurgy / Materials Engineering 8+ years of QA experience in structural steel fabricationor EPC industries, with at least one greenfield/brownfield or full QA systemrollout experience preferred Strong knowledge of ISO/ITP/NDT/WPS/ASME or ENstandards as applicable to structural and stainless steel fabrication Capable of setting up quality systems fromscratch forms, logs, audit trails, WPS libraries, and training frameworks Skilled in documentation, preventive systemdesign, client coordination, and continuous improvement Comfortable working in cross-functional teams ina first-time setup environment Preferred but not mandatory: Lead AuditorCertifications (ISO 9001 , ISO 14001, ISO 45001, and ISO 3834FMEA/SPC experience Key Skills Quality documentation and audit preparation Welding traceability and ITP/QAP setup Coordination with production, QC, and clientinspection teams Drawing/document control and revision discipline RCA, preventive system design, and continuousimprovement mindset Clear communication and training ability acrossfunctions .

To coordinate, conduct, and documentNon-Destructive Testing (NDT) activities across all welding stages and projectrequirements , ensuring that all jobs meet therelevant code, client standards, and acceptance criteria without delaying flowor compromising safety. Key Responsibilities 1. Plan and coordinate NDT testing (in-house oroutsourced) for all welds as per project specifications, ITPs, andclient-approved procedures. 2. Ensure the availability and readiness of NDT personnel,tools, and documentation before the job reaches its inspection stage. 3. Carry out or coordinate the following NDT methods asapplicable: o VisualTesting (VT) primary inspection of weld bead, surfacedefects, undercut, and overlap o LiquidPenetrant Testing (LPT/DPT) for surface cracks in filletwelds, corner joints, and SS jobs o MagneticParticle Testing (MPT) for ferromagnetic jobs (lessapplicable in SS, but relevant for any MS assemblies) o UltrasonicTesting (UT) for subsurface and volumetric inspection incritical butt joints or heavy welds o RadiographicTesting (RT/X-ray) for full-penetration welds where specifiedby client or code o PositiveMaterial Identification (PMI) for material mix-up preventionin high-specification SS components o Hardness,Ferrite, or Surface Roughness Checks where required byQA/Welding Expert or client 4. Ensure tests are conducted only after job is fullyready avoid premature offers or repeated attempts. 5. Mark and isolate jobs pending NDT prevent them fromproceeding to next stage until cleared. 6. Coordinate with third-party agencies for witnessing andapproval where needed. 7. Maintain NDT reports, maps, and traceability documentsin proper formats linked to job ID, weld ID, operator ID, and shift. 8. Escalate repeat failures, inconsistent readings, ortest rejections to QC Lead and Welding Expert for investigation. 9. Monitor equipment calibration, validity of NDT agencyapprovals, and Level II/III certification documents. 10. Provideinspection data during client audits and walkdowns; support QA in maintainingNDT records in ISO or client formats. 11. Supporttraining of junior QC staff on NDT interpretation and reporting discipline. Responsibilities Outsidethe Scope of This Role Does not interpret test standards oraccept/reject results independently unless certified escalates to LevelII/III or QC Lead as required Does not perform welding, rework, or repair only validates results and traceability Does not schedule project flow tests must alignwith fabrication sequence and readiness Does not control quality systems but ensurestesting aligns with QA-defined ITP and project specs Qualifications Experience Diploma or B.Tech in Mechanical / Metallurgy /Welding Engineering / NDT Technician 2 + years of experience in NDT coordination or execution in fabrication or EPC projects NDT Level IIcertification (at minimum) in VT and LPT; UTand RT preferred Familiarity with ASME, AWS, EN, and ISOstandards applicable to SS fabrication Experience coordinating outsourced NDT orin-house lab teams Strong understanding of NDT documentation,mapping, and traceability Good communication for the client, agency, andshift coordination Preferred: Experience in stainless steel or infrastructure fabrication setup

1. Conduct QAP (Quality Assurance Plan) verifications to ensure compliance with industry standards and customer requirements. 2. Perform inspections of oil rig equipment for drilling operations, ensuring adherence to specifications and quality standards. 3. Ensure compliance with applicable regulations, codes, and standards related to oil and gas industry practices. 4. Coordinate with vendors and clients to address quality-related issues, resolve conflicts, and maintain effective working relationships. 5. Facilitate coordination between various stakeholders at project sites to ensure the smooth execution of Electrical and Instrumentation activities. 6. Collaborate with cross-functional teams to identify and implement process improvements, cost-saving initiatives, and quality enhancements. 7. Conduct and oversee Quality activities, including interpreting and evaluating test results. 8. Provide technical support and guidance to the project team, assisting in problem-solving and decision-making processes. 9. Prepare and maintain accurate documentation, reports, and records related to quality control activities. 10. Stay updated with the latest advancements and best practices in the field of Electrical & Instrumentation engineering and quality control. Interested and suitable candidates can share your updated CVs by Mentioning subject of "QA /QC E&I Engineer / Sr Engineer" to careers@drillmecinternational.com / snaveenkumar@drillmecinternational.com

Position Title: Head Of QAQC & Operational Excellence Location: Head Office, Pune Reporting To: HeadProjects Role Overview We are seeking an accomplished Head of QAQC & Operational Excellence to establish, lead and continuously elevate our Quality function across system quality, supply quality and field quality for utility ? scale renewable energy projects Located in our Pune head office, you will architect and institutionalize a world ? class QA & QC department defining policies, processes and metrics and ensure EPC partners deliver defect ? free, compliant, high ? performance assets Your zero ? compromise mindset for quality, coupled with deep expertise in quality management systems and operational excellence frameworks, will be critical to our ambition of setting new benchmarks in Indias clean ? energy sector, Key Responsibilities Department Setup & Governance Organizational Design: Define the QA & QC department structure, roles & responsibilities, reporting lines and resourcing plan aligned to project pipeline, Quality Framework: Develop and deploy an Integrated Management System (IMS) encompassing ISO 9001, ISO 14001, ISO 45001 and industry ? specific standards, Policies & Procedures: Author and maintain Quality Manual, Project Quality Plans (MQAP), Field Quality Plans (FQAP), Inspection & Test Plans (ITP), work instructions, checklists and method statements, Governance Cadence: Establish management review forums, steering committees and KPIs for continuous oversight and strategic alignment, System Quality Management IMS Leadership: Drive certification and continual improvement across QMS, EMS and OHSMS; lead internal, external and third-party audits, and close gap findings, MIS & Reporting: Implement a digital Quality Management Information System to track non-conformances, corrective actions, COPQ (Cost of Poor Quality), supplier performance and KPI dashboards for executive review, Risk Management: Facilitate process ? based risk assessments (FMEA, HAZOP), incorporating quality risk controls into project lifecycle and change ? management processes, Supply Quality Assurance Vendor Qualification: Define criteria for A/B/C ? class components (PV modules, inverters, transformers, trackers, balance ? of ? system) and manage vendor audits, capability assessments and approval matrices, Inspection Strategy: Develop an optimal mix of in-house and third-party inspections (FAT, pre-dispatch checks, MDCC) to ensure zero ? defect deliveries, Supplier Development: Partner with procurement and engineering to drive cost-effective quality improvements, PPAP/APQP rollouts, and vendor corrective ? action closure, Field Quality Control Site Quality Oversight: Deploy FQAP, method statements and inspection checkpoints for civil, mechanical, electrical and SCADA works; enforce work ? permit compliance and safety interfaces, Non-Conformance Management: Oversee NCR logging, root-cause analyses (8D/PDCA), corrective/preventive actions and lessons-learned integration into process revisions, Commissioning Readiness: Collaborate with project teams to validate critical-to-quality points, ensure completion of pre-commissioning checks and support handover to O&M, Operational Excellence & Continuous Improvement Lean Six Sigma Deployment: Lead Black Belt/Green Belt initiatives targeting COPQ reduction, productivity gains and process cycle ? time compression across projects, Business Excellence Frameworks: Establish strategic priorities (SP/SI), and functional initiatives (FP/FI), ensuring cascading through KRAs for individual performance alignment, Benchmarking & Analytics: Institute KPI benchmarking (yield, uptime, waste, rework), conduct time-motion studies and apply SPC to monitor process capability, Leadership & Stakeholder Engagement Cross-Functional Collaboration: Act as the quality evangelist with Engineering, Procurement, Construction and O&M teams to embed quality ? by ? design principles, External Interface: Represent the company in regulatory, lender and insurer quality audits; liaise with TPAs, certification bodies and industry forums to influence best practices, Team Development: Recruit, mentor and upskill a high-performing QA & QC team; drive a culture of ownership, innovation and zero ? tolerance for substandard work, Qualifications & Experience Education: Bachelors or Masters in Mechanical/Electrical/Civil Engineering or equivalent; advanced certification in Quality (Six Sigma Master Black Belt, ASNT Level II, Lead Auditor IMS) is highly preferred, Experience: 15+ years in QA & QC and Operational Excellence roles within large-scale renewable energy or power ? generation projects (solar PV, wind, BESS, green hydrogen), Proven track record establishing quality functions and processes de novo, managing end-to-end system, supply and field quality across multiple EPC contractors, Hands-on expertise in ISO 9001/14001/45001, APQP/PPAP, ITP/FAT protocols, NCR management, COPQ frameworks and Lean ? Six Sigma deployments, Technical Skills: Proficiency with QMS software, ERP modules, Microsoft Project/Primavera and BI tools (Power BI preferred), Strong command of industry standards (IEC, IS, ASME, NACE, SSPC) and statutory compliance mandates, Core Competencies Strategic Vision & Execution: Ability to translate executive quality objectives into robust processes and measurable outcomes, Analytical Rigor: Data-driven decision maker with exceptional problem-solving and statistical analysis skills, Influence & Communication: Persuasive leader, adept at stakeholder management?from shop-floor teams to board-level presentations, Safety & Integrity: Unwavering commitment to HSE excellence and ethical practices; fosters a culture of accountability, Change Leadership: Skilled in driving organizational transformation, overcoming resistance and institutionalizing continuous improvement, Business Unit: GBU Renewables Division: REN AMEA India Legal Entity: ENGIE Energy India Private Limited Professional Experience: Senior (experience >15 years) Education Level: Bachelor's Degree Show

PAN INDIA 1. Should have Civil experience in IT building /Commercial projects / Substation) 2. Knowledge in quality documentation such as ITP, FQP, WMS / MSRA, MIR, Risk identification & Required Candidate profile Accurate documentation, maintaining customer satisfaction etc Evaluation, Internal Audit, NCR, Observation,3rd party inspection and implementing corrective actions providing

If you're interested in computer graphics and working with leading graphics validation engineers on Intel's latest GPU architecture, then our GPU Hardware IP (GHI) has an opportunity for you. In this position, you will be playing a key role in the pre-silicon validation of Intel's leading-edge graphics IP. As a candidate, you will build emulation/fpga prototyping platforms, develop efficient verification methodologies, execute to the validation plan, and debug issues seen during validation. You will define, develop, and perform functional validation for GPUs, focusing on the interaction of GPUs, media, display, and system-level features. Using various hardware and software tools and techniques, you will ensure validation coverage and that performance, power, and area goals are met. Additionally, you will review proposed design changes to assess their impact on validation plans, tasks, and timelines. Collaborating with other engineers, you will develop GPU validation methodologies, execute validation plans, optimize designs, troubleshoot, and perform failure analysis. Silicon debug will be a part of your responsibilities to identify root causes and resolve functional and triage failures for GPU issues. Your tasks will involve testing interactions between various GPU features using validation infrastructure, developing pre-silicon validation infrastructure, and creating a test environment for validation testing. Furthermore, you will publish GPU validation reports summarizing all validation activities performed, review results, and communicate them to relevant teams. Additionally, you will work with architecture, design, verification, board, platform, and manufacturing teams to maintain and improve debug, validation test strategy, methodologies, and processes for graphics interfaces to meet desired product specifications. The ideal candidate will exhibit analytical skills and possess a Bachelor's degree in Electronics Engineering, Electrical Engineering, Computer Engineering, or related STEM degree with 3+ years of industry experience, or a Master's Degree in Electronics Engineering, Electrical Engineering, Computer Engineering, or related STEM degree with 1+ years of industry experience. Knowledge of Computer Architecture, Microarchitecture Fundamentals, functional testing, pre-silicon validation techniques, tools, simulation, debug/troubleshooting, Zebu emulation, fpga prototyping, acceleration platforms, software programming in C/C++, and automation/scripting are required qualifications. Preferred qualifications include a deep understanding of HW/FW flows, experience and hands-on skills with LTB, ITP, Logic Analyzers, Oscilloscopes, Scan dumps, and in-circuit Emulators. This is an Experienced Hire job type with Shift 1 (India) as the primary location in India, Bangalore, under the Client Computing Group (CCG) responsible for driving business strategy and product development for Intel's PC products and platforms.,

Strong Exp in C Programming Exp on Intel X86 processor,chipsets, Memory&Error management Exp in EDKIi, BIOS development & Initialization In-depth understanding of BMC,CPU (Intel X86),Intel PCH,MRC,PCle HW debugging exp - ITP, Lauterbach/similar tools

Role & responsibilities Documentation and quality control procedures. Strong knowledge in steel erection, welding inspection, and fabrication standards. Should be able to handle ITPs, MTCs, WPS/WQR, and client-side inspections independently. Maintaining proper records and quality documentation aligned with project standards.

Execute and oversee all E&I installation, commissioning, and testing activities at the site. Ensure compliance with QA/QC standards and project specifications. Conduct inspections and witness tests as per ITP/QAP. Coordinate with vendors, contractors Required Candidate profile cement plant is preferable only. If you don’t get from cement plant then get field quality candidates from OGH/Thermal Power plants/Fertilizer/Steel Plants sectors.

Requisites (Core competencies / Skills) Full understanding of generic access control design and hardware solutions Full understanding of generic CCTV system design and hardware solutions Full understanding of generic network design and hardware solutions MS Excel Fluency In English Problem Solving and Attention to Detail Responsibilities Solution Tech Provide technical expertise through the application of engineering skills, processes, and procedures to develop a fully working fit for purpose integrated electronic security system utilising the latest proven technologies as per the guidelines received from the stakeholders. Perform the commissioning of components, systems, and solutions on site or remotely. Prepare/Develop and implement ITPs, Check sheets, Operating procedures, and commissioning plans. Pre-sales engineering a. Create solution designs, Drawings/diagrams and recommend products. Provide negotiated product, project management, installation, testing, commissioning costing for these solutions

We Are Hiring for Quality Engineer (Finishing) for Rajnandgaon Chhattisgarh Location. Roles and Responsibilities Conduct quality checks on high rise building finishing works such as plastering, flooring, false ceilings, concreting, Granite, waterproofing, painting, marble, and residential projects. Quality Assurance and Quality Control (QA/QC) for project finishing activities, including the preparation of checklists in accordance with the Inspection and Test Plan (ITP) and approved method statements. Ensure compliance with project specifications and industry standards for quality control. Identify defects or deviations from plans and implement corrective actions to maintain quality standards. Collaborate with construction teams to resolve issues related to material selection, installation methods, and workmanship. Develop and maintain documentation of inspection results, test reports, and certifications. Desired Candidate Profile 8-13 years of experience in the field of civil engineering or a related discipline. Diploma or B.Tech/B.E. degree in Civil Engineering. Strong understanding of building codes and regulations governing high-rise buildings' finishing works. Proficiency in using hand tools and equipment commonly used in construction sites. Perks & Benefits Lodging Boarding Provident Fund Bonus Health Insurance, Accidental Insurance Project Type- Residential and Industrial Immediate Joiners are Preferable.

Roles and Responsibilities Performing daily monitoring of site activities towards set requirements of the related documentation. Performing daily monitoring on delivered, stored and used material related to the site activities. Performing daily monitoring against the design related to the executed works on site. Performing daily monitoring on plant and equipment present on site, including liaising closely with the HSE department for issues of concern. Ensuring compliance for the requirements is maintained by all involved parties. Verifying activity compliance towards the applicable project quality plan (PMC and contractor). Issuing and following up on non-compliances through the site NCR process. Liaising closely with contractor and PMC operations team on site related issues. Providing guidance to the PMC operations team on site NCR issues, including the CAPA and follow-up. Assisting the PMC operations team with method statement, ITP and material reviews. Participating in punch lists, testing and commissioning monitoring and verification. Attending package related meetings to present and discuss site quality related issues. Tracking QA progress and identify issues and potential trends, including quality alerts. Providing written weekly and/ or ad hoc quality reports to the quality manager and project manager. Desired Candidate Profile Diploma in Civil Engineer with 2 - 6 years of experience.

Position Overview: We are seeking a dedicated and detail-oriented Quality Engineer to support our Quality Assurance and Quality Control operations. The ideal candidate will have 3-7 years of experience in fabrication and inspection of filtration systems, pressure vessels, and related process equipment. The role involves hands-on inspection, quality documentation, coordination with third-party inspection agencies, and ensuring compliance with industry standards. Key Responsibilities: Conduct in-process and final inspections of pressure vessels, filters, strainers, and associated fabrication work. Review and interpret engineering drawings, WPS/PQR, and material specifications for compliance. Prepare and maintain quality documentation , including inspection reports, test certificates, traceability records, and material test reports (MTRs). Coordinate with third-party inspection agencies (TPI) and clients during stage and final inspections. Support NDT activities including radiography, dye penetrant testing, ultrasonic testing, etc. Verify compliance with ASME, PED, IBR, and other applicable standards and codes. Participate in internal audits and assist in preparing for customer audits and QA documentation. Maintain calibration records and ensure availability of required inspection instruments. Raise non-conformance reports (NCRs) and work with production and engineering to implement corrective actions. Ensure the implementation of quality systems and continuous improvement practices across the shop floor. Qualifications & Skills: Diploma/Bachelors degree in Mechanical Engineering or equivalent 3–7 years of experience in Quality Control in a pressure vessel/fabrication-based manufacturing industry Sound knowledge of ASME Section VIII, PED, IBR , and other fabrication standards Familiarity with welding processes, NDT methods, and documentation requirements Proficient in MS Office and documentation tools Strong attention to detail and communication skills Ability to interpret technical drawings and specifications Preferred Skills: Certification in welding inspection (e.g., CSWIP, AWS-CWI) is a plus Experience working with ERP or quality management systems Exposure to Oil & Gas, Power, or Chemical process equipment inspection

(Job ID : 418032) BETPL Position: Manager : Quality Control & Assurance Basic Qualifications: 1. At least 10-12 years experience in the mechanical manufacturing industry relevant to Quality Control and Assurance 2. Bachelors/Master’s in Mechanical Engineering/Production Engineering or equivalent 3. End-to-end experience with ISO 9001; ISO 14001; ISO 45001 4. Extensive execution know-how and documentation maintenance for TPI, Internal and External Audits 5. Should be able/willing to commute to BETPL Factory (Shirwal, Satara) on a day-to-day basis compulsarily Preferred Qualifications: 1. Extensive hands-on experience with sections of BPVC code of ASME and certifying bodies like IBR, CBB 2. Understanding of global codes and standards like ASTM, DIN, BS, ANSI, EN 3. Understanding of Welding codes pertaining to global certifying societies/bodies like ASME, API, AWS and ISO 4. Experience in QC standards, codes, procedures and documentation right from material receipt to dispatch for various grades of Carbon, Low alloy, Stainless, Ni, Non-Ferrous Steel Duties: 1. Implementation of procedures for ISO 9001, ISO 14001 and ISO 45001 2. Compiling and exercising QAP for all BETFLOW, BETFITT and BETLOCK range of products 3. Setting up ITPs for all relevant BETFLOW, BETFITT and BETLOCK range of products along with SOPs 4. Setting up relevant SOPs for FATs/SATs for all BETFLOW, BETLOCK and BETFITT range of products 5. Leading and implementing internal audits; maintaining required documentation and audit reports 6. Maintaining documentation right from receipt to dispatch for all QC Procedures for all BETPL product ranges 7. Setting up Quality Dossier for all BETFLOW, BETLOCK and BETFITT range of products 8. Maintaining list of tools, equipment and breakdown/calibration record for all available tools and equipment

About Company Founded in 2011, ReNew, is one of the largest renewable energy companies globally, with a leadership position in India. Listed on Nasdaq under the ticker RNW, ReNew develops, builds, owns, and operates utility-scale wind energy projects, utility-scale solar energy projects, utility-scale firm power projects, and distributed solar energy projects. In addition to being a major independent power producer in India, ReNew is evolving to become an end-to-end decarbonization partner providing solutions in a just and inclusive manner in the areas of clean energy, green hydrogen, value-added energy offerings through digitalisation, storage, and carbon markets that increasingly are integral to addressing climate change. With a total capacity of more than 13.4 GW (including projects in pipeline), ReNew’s solar and wind energy projects are spread across 150+ sites, with a presence spanning 18 states in India, contributing to 1.9 % of India’s power capacity. Consequently, this has helped to avoid 0.5% of India’s total carbon emissions and 1.1% India’s total power sector emissions. In the over 10 years of its operation, ReNew has generated almost 1.3 lakh jobs, directly and indirectly. ReNew has achieved market leadership in the Indian renewable energy industry against the backdrop of the Government of India’s policies to promote growth of this sector. ReNew’s current group of stockholders contains several marquee investors including CPP Investments, Abu Dhabi Investment Authority, Goldman Sachs, GEF SACEF and JERA. Its mission is to play a pivotal role in meeting India’s growing energy needs in an efficient, sustainable, and socially responsible manner. ReNew stands committed to providing clean, safe, affordable, and sustainable energy for all and has been at the forefront of leading climate action in India. Job Description Review and approval of contractor’s FQAPs. Assuring implementation of Quality Plan. Inspection and audit of TL construction work including substation as per FQAP and checklists. Follow up of Quality observations/NCs and timely closure with contractor. Quality audits and Quality checks during erection of Towers. Quality inspection during stringing activity and experience in final checking of towers. Monitoring and planning the Site quality inspections through TPAs. Monitor and review all the Civil activities at site like material incoming, in-process activities, testing and commissioning. Inspection of Transmission line tower parts line templates angles and Bolts etc. Monitoring overall project quality control and quality assurance. Inspection of incoming materials (IMIR) Knowledge of relevant IS codes related to civil works. Preparation of NCs if any, find out root cause, proposed corrective action and suggest preventive action. Review of Drawings, SOP, FQP, Check list, etc. Implementing the QA/QC management system at the site. Provide daily & weekly feedback to project, and quality manager regarding progress reports, inspection & test status, quality issues & NC status. Preparing IMIR, Cube register, test reports for materials. Documentation and testing as per QAP & ITP Directly coordinating with the contractors regarding project activities such as construction, maintenance, support, documentation, and testing activities to ensure compliance with specifications, codes, and client requirements. Providing on job quality training. Reporting and documentation as per Indian Standards Auditing and documentation. Skills to do commissioning and testing. 3rd party inspector and contractor- management. Knowledge of Reinforced Cement Concrete, concrete cube test validation, NDT & core test. Knowledge of relevant IS codes of civil and structure works. Knowledge of raw material testing for civil construction works at site and lab.

Knowledge, Skills & Experience: Bachelors degree in Mechanical Engineering from a recognized and reputed university. Minimum 5-7 Years of relevant experience in similar role within the Piping and Oil & Gas industry. Strong knowledge of international standards such as ASTM, API, ASME, ISO, NACE etc. ASNT Level II certification in UT, MPI, PT, RT is mandatory. Proficient in English, both verbal & writing. Hands-on experience with piping components including pipes, fittings, flanges, valves, gaskets, etc. Skilled in reviewing client specifications, technical datasheets, material standards, and ensuring compliance with project requirements. Proven experience in managing project documentation such as, VDRL, ITP, MPS, WPS/PQR, NDE Procedure, MRB etc. Familiar with documentation control, NCR handling, and quality audits (preferred).

Technical Review Pre-Contract Support- Sales Responsible to assist the Manager TS In performing the review of technical specifications received during the enquiry stage for the project and Regular enquiries as per the defined criteria and Identification of the Exceptions/Clarifications and suggest alternatives/ up gradations. In clarifying the technical terms during negotiation with the customer and supplier. In preparing Compliance statement/Technical Exception/Clarification, and negotiate our technical proposal with customers through TQs. Meeting with the customers on behalf of Manager TS- where required. Pre Sales Order Technical Support Purchase Responsible to assist the Manager TS In preparing Technical compliance sheet to obtain the concurrence of the supplier For evaluating vendor offer for technical compliance with project requirement To evaluate Exception/deviation from the supplier and provide the feedback to sales/customer Post Order Technical Support Responsible to assist the Manager TS Review of technical deviations/concessions arise during order execution after the PO placement from the customer in resolving the technical issues arise during the execution of the orders and support QC/Commercial /Procurement team Stock Purchase Technical Support Responsible to assist the Manager – TS in Standardization of Stock Specification to optimize the stock considering the techno-commercial aspects of the market requirement. Non Material Requirements Review of the preproduction technical documents of the B2B project and regular orders for its compliance to customer requirement Timely submission of the preproduction documents and ensure its timely approval Assist the supplier to understand the customer comments and ensure that it is duly incorporated Health and Safety Adhere to company’s HSE procedure, policies. Knowledge, Skills & Experience: Bachelors degree in Mechanical Engineering from a recognized and reputed university. Minimum 5-7 Years of relevant experience in similar role within the Piping and Oil & Gas industry. Strong knowledge of international standards such as ASTM, API, ASME, ISO, NACE etc. ASNT Level II certification in UT, MPI, PT, RT is mandatory. Proficient in English, both verbal & writing. Hands-on experience with piping components including pipes, fittings, flanges, valves, gaskets, etc. Skilled in reviewing client specifications, technical datasheets, material standards, and ensuring compliance with project requirements. Proven experience in managing project documentation such as, VDRL, ITP, MPS, WPS/PQR, NDE Procedure, MRB etc. Familiar with documentation control, NCR handling, and quality audits (preferred).

Calculation and depositing of GST TDS, EPF and assistance for filing TDS/TCS return Purchase bill entry in tally Sales bill making and entry in tally Bank reconciliation Vendor payment Good knowledge of Preparations of Balance Sheet Required Candidate profile English: Excellent (Spoken and Written) (Sunday fix off).